summaryrefslogtreecommitdiff
path: root/drivers/watchdog
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-11 05:13:03 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-11 05:13:03 +0300
commit291b38a7565b41676cafd1b4052315a94d9c8977 (patch)
tree876251a73901865110c8d0d048cf379b8a6ff0e4 /drivers/watchdog
parentb5a53b61a2890ec08f404f524c1c42aa86f09be4 (diff)
parent6192c41fc608b0a58d5540b015aa1672c266f3c5 (diff)
downloadlinux-291b38a7565b41676cafd1b4052315a94d9c8977.tar.xz
Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...
Diffstat (limited to 'drivers/watchdog')
-rw-r--r--drivers/watchdog/cpu5wdt.c2
-rw-r--r--drivers/watchdog/eurotechwdt.c4
-rw-r--r--drivers/watchdog/pc87413_wdt.c2
-rw-r--r--drivers/watchdog/sc1200wdt.c2
-rw-r--r--drivers/watchdog/wdt.c4
5 files changed, 7 insertions, 7 deletions
diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c
index 6d03e8e30f8b..6c3f78e45c26 100644
--- a/drivers/watchdog/cpu5wdt.c
+++ b/drivers/watchdog/cpu5wdt.c
@@ -289,7 +289,7 @@ MODULE_DESCRIPTION("sma cpu5 watchdog driver");
MODULE_SUPPORTED_DEVICE("sma cpu5 watchdog");
MODULE_LICENSE("GPL");
-module_param(port, int, 0);
+module_param_hw(port, int, ioport, 0);
MODULE_PARM_DESC(port, "base address of watchdog card, default is 0x91");
module_param(verbose, int, 0);
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index 23ee53240c4c..38e96712264f 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -97,9 +97,9 @@ MODULE_PARM_DESC(nowayout,
#define WDT_TIMER_CFG 0xf3
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)");
module_param(ev, charp, 0);
MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `int')");
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 9f15dd9435d1..06a892e36a8d 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -579,7 +579,7 @@ MODULE_AUTHOR("Marcus Junker <junker@anduras.de>");
MODULE_DESCRIPTION("PC87413 WDT driver");
MODULE_LICENSE("GPL");
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, MODNAME " I/O port (default: "
__MODULE_STRING(IO_DEFAULT) ").");
diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c
index 131193a7acdf..b34d3d5ba632 100644
--- a/drivers/watchdog/sc1200wdt.c
+++ b/drivers/watchdog/sc1200wdt.c
@@ -88,7 +88,7 @@ MODULE_PARM_DESC(isapnp,
"When set to 0 driver ISA PnP support will be disabled");
#endif
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "io port");
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1");
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index e0206b5b7d89..e481fbbc4ae7 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -78,9 +78,9 @@ static int irq = 11;
static DEFINE_SPINLOCK(wdt_lock);
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
MODULE_PARM_DESC(io, "WDT io port (default=0x240)");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "WDT irq (default=11)");
/* Support for the Fan Tachometer on the WDT501-P */