summaryrefslogtreecommitdiff
path: root/drivers/watchdog
diff options
context:
space:
mode:
authorPaolo Bonzini <pbonzini@redhat.com>2017-04-05 14:41:15 +0300
committerWim Van Sebroeck <wim@iguana.be>2017-05-19 11:42:11 +0300
commit1fccb73011ea8a5fa0c6d357c33fa29c695139ea (patch)
tree4cbf80c4de062175b1835036a5c303022a9ec6be /drivers/watchdog
parent455a9a60b6d4afb293b0e63ec75cc8e82912a767 (diff)
downloadlinux-1fccb73011ea8a5fa0c6d357c33fa29c695139ea.tar.xz
iTCO_wdt: all versions count down twice
The ICH9 is listed as having TCO v2, and indeed the behavior in the datasheet corresponds to v2 (for example the NO_REBOOT flag is accessible via the 16KiB-aligned Root Complex Base Address). However, the TCO counts twice just like in v1; the documentation of the SECOND_TO_STS bit says: "ICH9 sets this bit to 1 to indicate that the TIMEOUT bit had been (or is currently) set and a second timeout occurred before the TCO_RLD register was written. If this bit is set and the NO_REBOOT config bit is 0, then the ICH9 will reboot the system after the second timeout. The same can be found in the BayTrail (Atom E3800) datasheet, and even HOWTOs around the Internet say that it will reboot after _twice_ the specified heartbeat. I did not find the Apollo Lake datasheet, but because v4/v5 has a SECOND_TO_STS bit just like the previous version I'm enabling this for Apollo Lake as well. Cc: linux-watchdog@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Diffstat (limited to 'drivers/watchdog')
-rw-r--r--drivers/watchdog/iTCO_wdt.c22
1 files changed, 10 insertions, 12 deletions
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 347f0389b089..c4f65873bfa4 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -306,16 +306,15 @@ static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
+ /* Reset the timeout status bit so that the timer
+ * needs to count down twice again before rebooting */
+ outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */
+
/* Reload the timer by writing to the TCO Timer Counter register */
- if (p->iTCO_version >= 2) {
+ if (p->iTCO_version >= 2)
outw(0x01, TCO_RLD(p));
- } else if (p->iTCO_version == 1) {
- /* Reset the timeout status bit so that the timer
- * needs to count down twice again before rebooting */
- outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */
-
+ else if (p->iTCO_version == 1)
outb(0x01, TCO_RLD(p));
- }
spin_unlock(&p->io_lock);
return 0;
@@ -328,11 +327,8 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
unsigned char val8;
unsigned int tmrval;
- tmrval = seconds_to_ticks(p, t);
-
- /* For TCO v1 the timer counts down twice before rebooting */
- if (p->iTCO_version == 1)
- tmrval /= 2;
+ /* The timer counts down twice before rebooting */
+ tmrval = seconds_to_ticks(p, t) / 2;
/* from the specs: */
/* "Values of 0h-3h are ignored and should not be attempted" */
@@ -385,6 +381,8 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
spin_lock(&p->io_lock);
val16 = inw(TCO_RLD(p));
val16 &= 0x3ff;
+ if (!(inw(TCO1_STS(p)) & 0x0008))
+ val16 += (inw(TCOv2_TMR(p)) & 0x3ff);
spin_unlock(&p->io_lock);
time_left = ticks_to_seconds(p, val16);