diff options
author | Douglas Anderson <dianders@chromium.org> | 2023-10-21 00:06:52 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2023-10-22 13:46:17 +0300 |
commit | a5feba71ec9c14a54c3babdc732c5b6866d8ee43 (patch) | |
tree | a69c8de6c4050d34398a1e7a173a5a10d2d5a356 /drivers | |
parent | 51a32e828109b4a209efde44505baa356b37a4ce (diff) | |
download | linux-a5feba71ec9c14a54c3babdc732c5b6866d8ee43.tar.xz |
r8152: Increase USB control msg timeout to 5000ms as per spec
According to the comment next to USB_CTRL_GET_TIMEOUT and
USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is
usually quite fast, the spec allows them to take up to 5 seconds.
Let's increase the timeout in the Realtek driver from 500ms to 5000ms
(using the #defines) to account for this.
This is not just a theoretical change. The need for the longer timeout
was seen in testing. Specifically, if you drop a sc7180-trogdor based
Chromebook into the kdb debugger and then "go" again after sitting in
the debugger for a while, the next USB control message takes a long
time. Out of ~40 tests the slowest USB control message was 4.5
seconds.
While dropping into kdb is not exactly an end-user scenario, the above
is similar to what could happen due to an temporary interrupt storm,
what could happen if there was a host controller (HW or SW) issue, or
what could happen if the Realtek device got into a confused state and
needed time to recover.
This change is fairly critical since the r8152 driver in Linux doesn't
expect register reads/writes (which are backed by USB control
messages) to fail.
Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/usb/r8152.c | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 0c13d9950cd8..482957beae66 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1212,7 +1212,7 @@ int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) ret = usb_control_msg(tp->udev, tp->pipe_ctrl_in, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, - value, index, tmp, size, 500); + value, index, tmp, size, USB_CTRL_GET_TIMEOUT); if (ret < 0) memset(data, 0xff, size); else @@ -1235,7 +1235,7 @@ int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) ret = usb_control_msg(tp->udev, tp->pipe_ctrl_out, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, - value, index, tmp, size, 500); + value, index, tmp, size, USB_CTRL_SET_TIMEOUT); kfree(tmp); @@ -9494,7 +9494,8 @@ static u8 __rtl_get_hw_ver(struct usb_device *udev) ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, - PLA_TCR0, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500); + PLA_TCR0, MCU_TYPE_PLA, tmp, sizeof(*tmp), + USB_CTRL_GET_TIMEOUT); if (ret > 0) ocp_data = (__le32_to_cpu(*tmp) >> 16) & VERSION_MASK; |