summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-09-18 20:33:46 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2019-09-18 20:33:46 +0300
commitc6b48dad92aedaa9bdc013ee495cb5b1bbdf1f11 (patch)
tree8d0bbf19d75fc1bf546ed1b05b560ea2df54689e /drivers
parent1f7d290a7275edb270dbee13212c37cb59940221 (diff)
parentfb9617edf6c0e1b86a6595cd92dd3f84595221d9 (diff)
downloadlinux-c6b48dad92aedaa9bdc013ee495cb5b1bbdf1f11.tar.xz
Merge tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/base/devcon.c43
-rw-r--r--drivers/base/platform.c37
-rw-r--r--drivers/mfd/Kconfig2
-rw-r--r--drivers/staging/Kconfig3
-rw-r--r--drivers/staging/Makefile2
-rw-r--r--drivers/staging/octeon-usb/octeon-hcd.c2
-rw-r--r--drivers/staging/uwb/Kconfig (renamed from drivers/uwb/Kconfig)0
-rw-r--r--drivers/staging/uwb/Makefile (renamed from drivers/uwb/Makefile)0
-rw-r--r--drivers/staging/uwb/TODO8
-rw-r--r--drivers/staging/uwb/address.c (renamed from drivers/uwb/address.c)0
-rw-r--r--drivers/staging/uwb/allocator.c (renamed from drivers/uwb/allocator.c)2
-rw-r--r--drivers/staging/uwb/beacon.c (renamed from drivers/uwb/beacon.c)0
-rw-r--r--drivers/staging/uwb/driver.c (renamed from drivers/uwb/driver.c)0
-rw-r--r--drivers/staging/uwb/drp-avail.c (renamed from drivers/uwb/drp-avail.c)0
-rw-r--r--drivers/staging/uwb/drp-ie.c (renamed from drivers/uwb/drp-ie.c)2
-rw-r--r--drivers/staging/uwb/drp.c (renamed from drivers/uwb/drp.c)0
-rw-r--r--drivers/staging/uwb/est.c (renamed from drivers/uwb/est.c)0
-rw-r--r--drivers/staging/uwb/hwa-rc.c (renamed from drivers/uwb/hwa-rc.c)6
-rw-r--r--drivers/staging/uwb/i1480/Makefile (renamed from drivers/uwb/i1480/Makefile)0
-rw-r--r--drivers/staging/uwb/i1480/dfu/Makefile (renamed from drivers/uwb/i1480/dfu/Makefile)0
-rw-r--r--drivers/staging/uwb/i1480/dfu/dfu.c (renamed from drivers/uwb/i1480/dfu/dfu.c)2
-rw-r--r--drivers/staging/uwb/i1480/dfu/i1480-dfu.h (renamed from drivers/uwb/i1480/dfu/i1480-dfu.h)2
-rw-r--r--drivers/staging/uwb/i1480/dfu/mac.c (renamed from drivers/uwb/i1480/dfu/mac.c)2
-rw-r--r--drivers/staging/uwb/i1480/dfu/phy.c (renamed from drivers/uwb/i1480/dfu/phy.c)2
-rw-r--r--drivers/staging/uwb/i1480/dfu/usb.c (renamed from drivers/uwb/i1480/dfu/usb.c)6
-rw-r--r--drivers/staging/uwb/i1480/i1480-est.c (renamed from drivers/uwb/i1480/i1480-est.c)2
-rw-r--r--drivers/staging/uwb/ie-rcv.c (renamed from drivers/uwb/ie-rcv.c)0
-rw-r--r--drivers/staging/uwb/ie.c (renamed from drivers/uwb/ie.c)0
-rw-r--r--drivers/staging/uwb/include/debug-cmd.h57
-rw-r--r--drivers/staging/uwb/include/spec.h767
-rw-r--r--drivers/staging/uwb/include/umc.h192
-rw-r--r--drivers/staging/uwb/include/whci.h102
-rw-r--r--drivers/staging/uwb/lc-dev.c (renamed from drivers/uwb/lc-dev.c)0
-rw-r--r--drivers/staging/uwb/lc-rc.c (renamed from drivers/uwb/lc-rc.c)0
-rw-r--r--drivers/staging/uwb/neh.c (renamed from drivers/uwb/neh.c)0
-rw-r--r--drivers/staging/uwb/pal.c (renamed from drivers/uwb/pal.c)2
-rw-r--r--drivers/staging/uwb/radio.c (renamed from drivers/uwb/radio.c)2
-rw-r--r--drivers/staging/uwb/reset.c (renamed from drivers/uwb/reset.c)0
-rw-r--r--drivers/staging/uwb/rsv.c (renamed from drivers/uwb/rsv.c)2
-rw-r--r--drivers/staging/uwb/scan.c (renamed from drivers/uwb/scan.c)0
-rw-r--r--drivers/staging/uwb/umc-bus.c (renamed from drivers/uwb/umc-bus.c)2
-rw-r--r--drivers/staging/uwb/umc-dev.c (renamed from drivers/uwb/umc-dev.c)2
-rw-r--r--drivers/staging/uwb/umc-drv.c (renamed from drivers/uwb/umc-drv.c)2
-rw-r--r--drivers/staging/uwb/uwb-debug.c (renamed from drivers/uwb/uwb-debug.c)3
-rw-r--r--drivers/staging/uwb/uwb-internal.h (renamed from drivers/uwb/uwb-internal.h)2
-rw-r--r--drivers/staging/uwb/uwb.h817
-rw-r--r--drivers/staging/uwb/uwbd.c (renamed from drivers/uwb/uwbd.c)0
-rw-r--r--drivers/staging/uwb/whc-rc.c (renamed from drivers/uwb/whc-rc.c)6
-rw-r--r--drivers/staging/uwb/whci.c (renamed from drivers/uwb/whci.c)4
-rw-r--r--drivers/staging/wusbcore/Documentation/wusb-cbaf130
-rw-r--r--drivers/staging/wusbcore/Documentation/wusb-design-overview.rst457
-rw-r--r--drivers/staging/wusbcore/Kconfig (renamed from drivers/usb/wusbcore/Kconfig)3
-rw-r--r--drivers/staging/wusbcore/Makefile (renamed from drivers/usb/wusbcore/Makefile)2
-rw-r--r--drivers/staging/wusbcore/TODO8
-rw-r--r--drivers/staging/wusbcore/cbaf.c (renamed from drivers/usb/wusbcore/cbaf.c)6
-rw-r--r--drivers/staging/wusbcore/crypto.c (renamed from drivers/usb/wusbcore/crypto.c)4
-rw-r--r--drivers/staging/wusbcore/dev-sysfs.c (renamed from drivers/usb/wusbcore/dev-sysfs.c)0
-rw-r--r--drivers/staging/wusbcore/devconnect.c (renamed from drivers/usb/wusbcore/devconnect.c)2
-rw-r--r--drivers/staging/wusbcore/host/Kconfig28
-rw-r--r--drivers/staging/wusbcore/host/Makefile3
-rw-r--r--drivers/staging/wusbcore/host/hwa-hc.c (renamed from drivers/usb/host/hwa-hc.c)4
-rw-r--r--drivers/staging/wusbcore/host/whci/Makefile (renamed from drivers/usb/host/whci/Makefile)0
-rw-r--r--drivers/staging/wusbcore/host/whci/asl.c (renamed from drivers/usb/host/whci/asl.c)4
-rw-r--r--drivers/staging/wusbcore/host/whci/debug.c (renamed from drivers/usb/host/whci/debug.c)2
-rw-r--r--drivers/staging/wusbcore/host/whci/hcd.c (renamed from drivers/usb/host/whci/hcd.c)4
-rw-r--r--drivers/staging/wusbcore/host/whci/hw.c (renamed from drivers/usb/host/whci/hw.c)4
-rw-r--r--drivers/staging/wusbcore/host/whci/init.c (renamed from drivers/usb/host/whci/init.c)4
-rw-r--r--drivers/staging/wusbcore/host/whci/int.c (renamed from drivers/usb/host/whci/int.c)4
-rw-r--r--drivers/staging/wusbcore/host/whci/pzl.c (renamed from drivers/usb/host/whci/pzl.c)4
-rw-r--r--drivers/staging/wusbcore/host/whci/qset.c (renamed from drivers/usb/host/whci/qset.c)4
-rw-r--r--drivers/staging/wusbcore/host/whci/whcd.h (renamed from drivers/usb/host/whci/whcd.h)4
-rw-r--r--drivers/staging/wusbcore/host/whci/whci-hc.h (renamed from drivers/usb/host/whci/whci-hc.h)0
-rw-r--r--drivers/staging/wusbcore/host/whci/wusb.c (renamed from drivers/usb/host/whci/wusb.c)4
-rw-r--r--drivers/staging/wusbcore/include/association.h151
-rw-r--r--drivers/staging/wusbcore/include/wusb-wa.h304
-rw-r--r--drivers/staging/wusbcore/include/wusb.h362
-rw-r--r--drivers/staging/wusbcore/mmc.c (renamed from drivers/usb/wusbcore/mmc.c)2
-rw-r--r--drivers/staging/wusbcore/pal.c (renamed from drivers/usb/wusbcore/pal.c)0
-rw-r--r--drivers/staging/wusbcore/reservation.c (renamed from drivers/usb/wusbcore/reservation.c)2
-rw-r--r--drivers/staging/wusbcore/rh.c (renamed from drivers/usb/wusbcore/rh.c)0
-rw-r--r--drivers/staging/wusbcore/security.c (renamed from drivers/usb/wusbcore/security.c)0
-rw-r--r--drivers/staging/wusbcore/wa-hc.c (renamed from drivers/usb/wusbcore/wa-hc.c)0
-rw-r--r--drivers/staging/wusbcore/wa-hc.h (renamed from drivers/usb/wusbcore/wa-hc.h)6
-rw-r--r--drivers/staging/wusbcore/wa-nep.c (renamed from drivers/usb/wusbcore/wa-nep.c)0
-rw-r--r--drivers/staging/wusbcore/wa-rpipe.c (renamed from drivers/usb/wusbcore/wa-rpipe.c)0
-rw-r--r--drivers/staging/wusbcore/wa-xfer.c (renamed from drivers/usb/wusbcore/wa-xfer.c)0
-rw-r--r--drivers/staging/wusbcore/wusbhc.c (renamed from drivers/usb/wusbcore/wusbhc.c)0
-rw-r--r--drivers/staging/wusbcore/wusbhc.h (renamed from drivers/usb/wusbcore/wusbhc.h)4
-rw-r--r--drivers/usb/Kconfig39
-rw-r--r--drivers/usb/Makefile4
-rw-r--r--drivers/usb/atm/cxacru.c58
-rw-r--r--drivers/usb/atm/ueagle-atm.c16
-rw-r--r--drivers/usb/cdns3/Kconfig46
-rw-r--r--drivers/usb/cdns3/Makefile16
-rw-r--r--drivers/usb/cdns3/cdns3-pci-wrap.c203
-rw-r--r--drivers/usb/cdns3/core.c651
-rw-r--r--drivers/usb/cdns3/core.h98
-rw-r--r--drivers/usb/cdns3/debug.h161
-rw-r--r--drivers/usb/cdns3/drd.c381
-rw-r--r--drivers/usb/cdns3/drd.h167
-rw-r--r--drivers/usb/cdns3/ep0.c886
-rw-r--r--drivers/usb/cdns3/gadget-export.h28
-rw-r--r--drivers/usb/cdns3/gadget.c2744
-rw-r--r--drivers/usb/cdns3/gadget.h1338
-rw-r--r--drivers/usb/cdns3/host-export.h28
-rw-r--r--drivers/usb/cdns3/host.c74
-rw-r--r--drivers/usb/cdns3/trace.c11
-rw-r--r--drivers/usb/cdns3/trace.h493
-rw-r--r--drivers/usb/chipidea/Kconfig1
-rw-r--r--drivers/usb/chipidea/ci.h12
-rw-r--r--drivers/usb/chipidea/ci_hdrc_msm.c9
-rw-r--r--drivers/usb/chipidea/core.c97
-rw-r--r--drivers/usb/chipidea/otg.c8
-rw-r--r--drivers/usb/chipidea/udc.c3
-rw-r--r--drivers/usb/class/usblp.c13
-rw-r--r--drivers/usb/class/usbtmc.c13
-rw-r--r--drivers/usb/common/Kconfig51
-rw-r--r--drivers/usb/common/Makefile2
-rw-r--r--drivers/usb/common/debug.c268
-rw-r--r--drivers/usb/common/usb-conn-gpio.c284
-rw-r--r--drivers/usb/core/config.c12
-rw-r--r--drivers/usb/core/devio.c108
-rw-r--r--drivers/usb/core/driver.c2
-rw-r--r--drivers/usb/core/generic.c5
-rw-r--r--drivers/usb/core/hcd-pci.c3
-rw-r--r--drivers/usb/core/hcd.c11
-rw-r--r--drivers/usb/core/phy.c21
-rw-r--r--drivers/usb/core/phy.h1
-rw-r--r--drivers/usb/core/port.c9
-rw-r--r--drivers/usb/core/usb.c222
-rw-r--r--drivers/usb/core/usb.h3
-rw-r--r--drivers/usb/dwc2/gadget.c9
-rw-r--r--drivers/usb/dwc2/hcd.c6
-rw-r--r--drivers/usb/dwc2/params.c5
-rw-r--r--drivers/usb/dwc2/platform.c4
-rw-r--r--drivers/usb/dwc3/core.c61
-rw-r--r--drivers/usb/dwc3/core.h2
-rw-r--r--drivers/usb/dwc3/debug.h252
-rw-r--r--drivers/usb/dwc3/dwc3-keystone.c5
-rw-r--r--drivers/usb/dwc3/dwc3-meson-g12a.c18
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c15
-rw-r--r--drivers/usb/dwc3/dwc3-st.c10
-rw-r--r--drivers/usb/dwc3/gadget.c24
-rw-r--r--drivers/usb/dwc3/host.c22
-rw-r--r--drivers/usb/dwc3/trace.h2
-rw-r--r--drivers/usb/gadget/composite.c38
-rw-r--r--drivers/usb/gadget/udc/aspeed-vhub/core.c7
-rw-r--r--drivers/usb/gadget/udc/aspeed-vhub/dev.c80
-rw-r--r--drivers/usb/gadget/udc/aspeed-vhub/ep0.c59
-rw-r--r--drivers/usb/gadget/udc/aspeed-vhub/epn.c2
-rw-r--r--drivers/usb/gadget/udc/aspeed-vhub/hub.c15
-rw-r--r--drivers/usb/gadget/udc/aspeed-vhub/vhub.h3
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.c1
-rw-r--r--drivers/usb/gadget/udc/bcm63xx_udc.c8
-rw-r--r--drivers/usb/gadget/udc/bdc/bdc_core.c4
-rw-r--r--drivers/usb/gadget/udc/core.c2
-rw-r--r--drivers/usb/gadget/udc/gr_udc.c8
-rw-r--r--drivers/usb/gadget/udc/lpc32xx_udc.c14
-rw-r--r--drivers/usb/gadget/udc/net2280.c38
-rw-r--r--drivers/usb/gadget/udc/net2280.h3
-rw-r--r--drivers/usb/gadget/udc/pch_udc.c3
-rw-r--r--drivers/usb/gadget/udc/renesas_usb3.c4
-rw-r--r--drivers/usb/gadget/udc/s3c-hsudc.c4
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.c2
-rw-r--r--drivers/usb/gadget/udc/udc-xilinx.c4
-rw-r--r--drivers/usb/host/Kconfig32
-rw-r--r--drivers/usb/host/Makefile4
-rw-r--r--drivers/usb/host/ehci-atmel.c3
-rw-r--r--drivers/usb/host/ehci-exynos.c23
-rw-r--r--drivers/usb/host/ehci-grlib.c2
-rw-r--r--drivers/usb/host/ehci-hcd.c2
-rw-r--r--drivers/usb/host/ehci-omap.c4
-rw-r--r--drivers/usb/host/ehci-orion.c3
-rw-r--r--drivers/usb/host/ehci-platform.c4
-rw-r--r--drivers/usb/host/ehci-pmcmsp.c2
-rw-r--r--drivers/usb/host/ehci-ppc-of.c2
-rw-r--r--drivers/usb/host/ehci-ps3.c2
-rw-r--r--drivers/usb/host/ehci-sh.c5
-rw-r--r--drivers/usb/host/ehci-st.c4
-rw-r--r--drivers/usb/host/ehci-w90x900.c130
-rw-r--r--drivers/usb/host/ehci-xilinx-of.c2
-rw-r--r--drivers/usb/host/fhci-hcd.c2
-rw-r--r--drivers/usb/host/fotg210-hcd.c2
-rw-r--r--drivers/usb/host/imx21-hcd.c6
-rw-r--r--drivers/usb/host/isp116x-hcd.c6
-rw-r--r--drivers/usb/host/isp1362-hcd.c5
-rw-r--r--drivers/usb/host/max3421-hcd.c17
-rw-r--r--drivers/usb/host/ohci-exynos.c23
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/host/ohci-platform.c4
-rw-r--r--drivers/usb/host/ohci-ppc-of.c2
-rw-r--r--drivers/usb/host/ohci-ps3.c2
-rw-r--r--drivers/usb/host/ohci-pxa27x.c2
-rw-r--r--drivers/usb/host/ohci-sa1111.c2
-rw-r--r--drivers/usb/host/ohci-st.c4
-rw-r--r--drivers/usb/host/ohci-tmio.c3
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c446
-rw-r--r--drivers/usb/host/oxu210hp.h448
-rw-r--r--drivers/usb/host/r8a66597-hcd.c6
-rw-r--r--drivers/usb/host/sl811-hcd.c6
-rw-r--r--drivers/usb/host/u132-hcd.c2
-rw-r--r--drivers/usb/host/uhci-grlib.c2
-rw-r--r--drivers/usb/host/uhci-pci.c2
-rw-r--r--drivers/usb/host/uhci-platform.c2
-rw-r--r--drivers/usb/host/xhci-dbgcap.c1
-rw-r--r--drivers/usb/host/xhci-dbgtty.c4
-rw-r--r--drivers/usb/host/xhci-ext-caps.c18
-rw-r--r--drivers/usb/host/xhci-hub.c2
-rw-r--r--drivers/usb/host/xhci-mem.c1
-rw-r--r--drivers/usb/host/xhci-mtk.c13
-rw-r--r--drivers/usb/host/xhci-mtk.h1
-rw-r--r--drivers/usb/host/xhci-plat.c15
-rw-r--r--drivers/usb/host/xhci-plat.h2
-rw-r--r--drivers/usb/host/xhci-rcar.c28
-rw-r--r--drivers/usb/host/xhci-rcar.h21
-rw-r--r--drivers/usb/host/xhci.c5
-rw-r--r--drivers/usb/host/xhci.h3
-rw-r--r--drivers/usb/isp1760/isp1760-core.c3
-rw-r--r--drivers/usb/isp1760/isp1760-if.c1
-rw-r--r--drivers/usb/misc/cypress_cy7c63.c29
-rw-r--r--drivers/usb/misc/cytherm.c64
-rw-r--r--drivers/usb/misc/lvstest.c19
-rw-r--r--drivers/usb/misc/rio500.c109
-rw-r--r--drivers/usb/misc/trancevibrator.c15
-rw-r--r--drivers/usb/misc/usbsevseg.c17
-rw-r--r--drivers/usb/mtu3/Kconfig1
-rw-r--r--drivers/usb/mtu3/mtu3.h5
-rw-r--r--drivers/usb/mtu3/mtu3_core.c4
-rw-r--r--drivers/usb/mtu3/mtu3_debugfs.c4
-rw-r--r--drivers/usb/mtu3/mtu3_dr.c48
-rw-r--r--drivers/usb/mtu3/mtu3_dr.h6
-rw-r--r--drivers/usb/mtu3/mtu3_plat.c3
-rw-r--r--drivers/usb/musb/musb_core.c24
-rw-r--r--drivers/usb/musb/musb_host.c2
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c18
-rw-r--r--drivers/usb/phy/phy-fsl-usb.c14
-rw-r--r--drivers/usb/phy/phy-mv-usb.c17
-rw-r--r--drivers/usb/phy/phy-tahvo.c18
-rw-r--r--drivers/usb/phy/phy-twl6030-usb.c12
-rw-r--r--drivers/usb/renesas_usbhs/mod_host.c2
-rw-r--r--drivers/usb/roles/class.c41
-rw-r--r--drivers/usb/roles/intel-xhci-usb-role-switch.c27
-rw-r--r--drivers/usb/serial/ftdi_sio.c43
-rw-r--r--drivers/usb/storage/debug.h2
-rw-r--r--drivers/usb/storage/isd200.c2
-rw-r--r--drivers/usb/storage/scsiglue.c8
-rw-r--r--drivers/usb/typec/Kconfig1
-rw-r--r--drivers/usb/typec/mux.c2
-rw-r--r--drivers/usb/typec/tcpm/fusb302.c101
-rw-r--r--drivers/usb/typec/tcpm/tcpm.c23
-rw-r--r--drivers/usb/typec/tcpm/wcove.c4
-rw-r--r--drivers/usb/typec/ucsi/ucsi_ccg.c13
-rw-r--r--drivers/usb/usb-skeleton.c8
-rw-r--r--drivers/usb/usbip/stub.h7
-rw-r--r--drivers/usb/usbip/stub_dev.c50
-rw-r--r--drivers/usb/usbip/stub_main.c57
-rw-r--r--drivers/usb/usbip/stub_rx.c204
-rw-r--r--drivers/usb/usbip/stub_tx.c99
-rw-r--r--drivers/usb/usbip/usbip_common.c59
-rw-r--r--drivers/usb/usbip/vhci_hcd.c12
-rw-r--r--drivers/usb/usbip/vhci_rx.c3
-rw-r--r--drivers/usb/usbip/vhci_tx.c66
-rw-r--r--drivers/usb/usbip/vudc.h2
-rw-r--r--drivers/usb/usbip/vudc_dev.c9
-rw-r--r--drivers/usb/usbip/vudc_main.c1
-rw-r--r--drivers/usb/usbip/vudc_sysfs.c7
268 files changed, 13346 insertions, 2212 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 477d63d0364d..13f09bf64a0f 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -106,8 +106,6 @@ source "drivers/hid/Kconfig"
source "drivers/usb/Kconfig"
-source "drivers/uwb/Kconfig"
-
source "drivers/mmc/Kconfig"
source "drivers/memstick/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 05be8c798c51..ad66dc2325d7 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -100,7 +100,6 @@ obj-$(CONFIG_ZORRO) += zorro/
obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
obj-$(CONFIG_PARIDE) += block/paride/
obj-$(CONFIG_TC) += tc/
-obj-$(CONFIG_UWB) += uwb/
obj-$(CONFIG_USB_PHY) += usb/
obj-$(CONFIG_USB) += usb/
obj-$(CONFIG_USB_SUPPORT) += usb/
diff --git a/drivers/base/devcon.c b/drivers/base/devcon.c
index 1d488dc5dd0c..14e2178e09f8 100644
--- a/drivers/base/devcon.c
+++ b/drivers/base/devcon.c
@@ -12,9 +12,6 @@
static DEFINE_MUTEX(devcon_lock);
static LIST_HEAD(devcon_list);
-typedef void *(*devcon_match_fn_t)(struct device_connection *con, int ep,
- void *data);
-
static void *
fwnode_graph_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
void *data, devcon_match_fn_t match)
@@ -61,6 +58,34 @@ fwnode_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
}
/**
+ * fwnode_connection_find_match - Find connection from a device node
+ * @fwnode: Device node with the connection
+ * @con_id: Identifier for the connection
+ * @data: Data for the match function
+ * @match: Function to check and convert the connection description
+ *
+ * Find a connection with unique identifier @con_id between @fwnode and another
+ * device node. @match will be used to convert the connection description to
+ * data the caller is expecting to be returned.
+ */
+void *fwnode_connection_find_match(struct fwnode_handle *fwnode,
+ const char *con_id, void *data,
+ devcon_match_fn_t match)
+{
+ void *ret;
+
+ if (!fwnode || !match)
+ return NULL;
+
+ ret = fwnode_graph_devcon_match(fwnode, con_id, data, match);
+ if (ret)
+ return ret;
+
+ return fwnode_devcon_match(fwnode, con_id, data, match);
+}
+EXPORT_SYMBOL_GPL(fwnode_connection_find_match);
+
+/**
* device_connection_find_match - Find physical connection to a device
* @dev: Device with the connection
* @con_id: Identifier for the connection
@@ -83,15 +108,9 @@ void *device_connection_find_match(struct device *dev, const char *con_id,
if (!match)
return NULL;
- if (fwnode) {
- ret = fwnode_graph_devcon_match(fwnode, con_id, data, match);
- if (ret)
- return ret;
-
- ret = fwnode_devcon_match(fwnode, con_id, data, match);
- if (ret)
- return ret;
- }
+ ret = fwnode_connection_find_match(fwnode, con_id, data, match);
+ if (ret)
+ return ret;
mutex_lock(&devcon_lock);
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 11c6e56ccc22..b6c6c7d97d5b 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -40,25 +40,6 @@ struct device platform_bus = {
EXPORT_SYMBOL_GPL(platform_bus);
/**
- * arch_setup_pdev_archdata - Allow manipulation of archdata before its used
- * @pdev: platform device
- *
- * This is called before platform_device_add() such that any pdev_archdata may
- * be setup before the platform_notifier is called. So if a user needs to
- * manipulate any relevant information in the pdev_archdata they can do:
- *
- * platform_device_alloc()
- * ... manipulate ...
- * platform_device_add()
- *
- * And if they don't care they can just call platform_device_register() and
- * everything will just work out.
- */
-void __weak arch_setup_pdev_archdata(struct platform_device *pdev)
-{
-}
-
-/**
* platform_get_resource - get a resource for a device
* @dev: platform device
* @type: resource type
@@ -313,6 +294,20 @@ struct platform_object {
char name[];
};
+/*
+ * Set up default DMA mask for platform devices if the they weren't
+ * previously set by the architecture / DT.
+ */
+static void setup_pdev_dma_masks(struct platform_device *pdev)
+{
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ if (!pdev->dma_mask)
+ pdev->dma_mask = DMA_BIT_MASK(32);
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &pdev->dma_mask;
+};
+
/**
* platform_device_put - destroy a platform device
* @pdev: platform device to free
@@ -359,7 +354,7 @@ struct platform_device *platform_device_alloc(const char *name, int id)
pa->pdev.id = id;
device_initialize(&pa->pdev.dev);
pa->pdev.dev.release = platform_device_release;
- arch_setup_pdev_archdata(&pa->pdev);
+ setup_pdev_dma_masks(&pa->pdev);
}
return pa ? &pa->pdev : NULL;
@@ -561,7 +556,7 @@ EXPORT_SYMBOL_GPL(platform_device_del);
int platform_device_register(struct platform_device *pdev)
{
device_initialize(&pdev->dev);
- arch_setup_pdev_archdata(pdev);
+ setup_pdev_dma_masks(pdev);
return platform_device_add(pdev);
}
EXPORT_SYMBOL_GPL(platform_device_register);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f129f9678940..c8cbde59bbf6 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1105,7 +1105,6 @@ config MFD_SI476X_CORE
config MFD_SM501
tristate "Silicon Motion SM501"
depends on HAS_DMA
- select DMA_DECLARE_COHERENT
---help---
This is the core driver for the Silicon Motion SM501 multimedia
companion chip. This device is a multifunction device which may
@@ -1714,7 +1713,6 @@ config MFD_TC6393XB
select GPIOLIB
select MFD_CORE
select MFD_TMIO
- select DMA_DECLARE_COHERENT
help
Support for Toshiba Mobile IO Controller TC6393XB
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 7c96a01eef6c..cf419d9c942d 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -120,4 +120,7 @@ source "drivers/staging/kpc2000/Kconfig"
source "drivers/staging/isdn/Kconfig"
+source "drivers/staging/wusbcore/Kconfig"
+source "drivers/staging/uwb/Kconfig"
+
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index fcaac9693b83..38179bc842a8 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -50,3 +50,5 @@ obj-$(CONFIG_EROFS_FS) += erofs/
obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/
obj-$(CONFIG_KPC2000) += kpc2000/
obj-$(CONFIG_ISDN_CAPI) += isdn/
+obj-$(CONFIG_UWB) += uwb/
+obj-$(CONFIG_USB_WUSB) += wusbcore/
diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c
index cd2b777073c4..a5321cc692c5 100644
--- a/drivers/staging/octeon-usb/octeon-hcd.c
+++ b/drivers/staging/octeon-usb/octeon-hcd.c
@@ -3512,7 +3512,7 @@ static const struct hc_driver octeon_hc_driver = {
.product_desc = "Octeon Host Controller",
.hcd_priv_size = sizeof(struct octeon_hcd),
.irq = octeon_usb_irq,
- .flags = HCD_MEMORY | HCD_USB2,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB2,
.start = octeon_usb_start,
.stop = octeon_usb_stop,
.urb_enqueue = octeon_usb_urb_enqueue,
diff --git a/drivers/uwb/Kconfig b/drivers/staging/uwb/Kconfig
index 259e053e1e09..259e053e1e09 100644
--- a/drivers/uwb/Kconfig
+++ b/drivers/staging/uwb/Kconfig
diff --git a/drivers/uwb/Makefile b/drivers/staging/uwb/Makefile
index 32f4de7afbd6..32f4de7afbd6 100644
--- a/drivers/uwb/Makefile
+++ b/drivers/staging/uwb/Makefile
diff --git a/drivers/staging/uwb/TODO b/drivers/staging/uwb/TODO
new file mode 100644
index 000000000000..abae57000534
--- /dev/null
+++ b/drivers/staging/uwb/TODO
@@ -0,0 +1,8 @@
+TODO: Remove in late 2019 unless there are users
+
+There seems to not be any real wireless USB devices anywhere in the wild
+anymore. It turned out to be a failed technology :(
+
+This will be removed from the tree if no one objects.
+
+Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/uwb/address.c b/drivers/staging/uwb/address.c
index 857d5cd56a95..857d5cd56a95 100644
--- a/drivers/uwb/address.c
+++ b/drivers/staging/uwb/address.c
diff --git a/drivers/uwb/allocator.c b/drivers/staging/uwb/allocator.c
index 2e1590124d5f..1f429fba20b7 100644
--- a/drivers/uwb/allocator.c
+++ b/drivers/staging/uwb/allocator.c
@@ -6,7 +6,7 @@
*/
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/uwb.h>
+#include "uwb.h"
#include "uwb-internal.h"
diff --git a/drivers/uwb/beacon.c b/drivers/staging/uwb/beacon.c
index c483c19c5ef8..c483c19c5ef8 100644
--- a/drivers/uwb/beacon.c
+++ b/drivers/staging/uwb/beacon.c
diff --git a/drivers/uwb/driver.c b/drivers/staging/uwb/driver.c
index 5755c2e49ffc..5755c2e49ffc 100644
--- a/drivers/uwb/driver.c
+++ b/drivers/staging/uwb/driver.c
diff --git a/drivers/uwb/drp-avail.c b/drivers/staging/uwb/drp-avail.c
index 02392ab82a7d..02392ab82a7d 100644
--- a/drivers/uwb/drp-avail.c
+++ b/drivers/staging/uwb/drp-avail.c
diff --git a/drivers/uwb/drp-ie.c b/drivers/staging/uwb/drp-ie.c
index 4b545b41161c..b2a862cf76de 100644
--- a/drivers/uwb/drp-ie.c
+++ b/drivers/staging/uwb/drp-ie.c
@@ -8,8 +8,8 @@
#include <linux/kernel.h>
#include <linux/random.h>
#include <linux/slab.h>
-#include <linux/uwb.h>
+#include "uwb.h"
#include "uwb-internal.h"
diff --git a/drivers/uwb/drp.c b/drivers/staging/uwb/drp.c
index 869987bede7b..869987bede7b 100644
--- a/drivers/uwb/drp.c
+++ b/drivers/staging/uwb/drp.c
diff --git a/drivers/uwb/est.c b/drivers/staging/uwb/est.c
index d4141ffdd775..d4141ffdd775 100644
--- a/drivers/uwb/est.c
+++ b/drivers/staging/uwb/est.c
diff --git a/drivers/uwb/hwa-rc.c b/drivers/staging/uwb/hwa-rc.c
index cd03b7f827c1..b6effad749d7 100644
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/staging/uwb/hwa-rc.c
@@ -38,9 +38,9 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
-#include <linux/usb/wusb.h>
-#include <linux/usb/wusb-wa.h>
-#include <linux/uwb.h>
+#include "../wusbcore/include/wusb.h"
+#include "../wusbcore/include/wusb-wa.h"
+#include "uwb.h"
#include "uwb-internal.h"
diff --git a/drivers/uwb/i1480/Makefile b/drivers/staging/uwb/i1480/Makefile
index d26fb9b845ae..d26fb9b845ae 100644
--- a/drivers/uwb/i1480/Makefile
+++ b/drivers/staging/uwb/i1480/Makefile
diff --git a/drivers/uwb/i1480/dfu/Makefile b/drivers/staging/uwb/i1480/dfu/Makefile
index 4739fdac5922..4739fdac5922 100644
--- a/drivers/uwb/i1480/dfu/Makefile
+++ b/drivers/staging/uwb/i1480/dfu/Makefile
diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/staging/uwb/i1480/dfu/dfu.c
index ec1af858ead9..9d51ce8faad1 100644
--- a/drivers/uwb/i1480/dfu/dfu.c
+++ b/drivers/staging/uwb/i1480/dfu/dfu.c
@@ -17,9 +17,9 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/device.h>
-#include <linux/uwb.h>
#include <linux/random.h>
#include <linux/export.h>
+#include "../../uwb.h"
/*
* i1480_rceb_check - Check RCEB for expected field values
diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/staging/uwb/i1480/dfu/i1480-dfu.h
index 9dd567d174b3..b21d058ecc23 100644
--- a/drivers/uwb/i1480/dfu/i1480-dfu.h
+++ b/drivers/staging/uwb/i1480/dfu/i1480-dfu.h
@@ -50,9 +50,9 @@
#ifndef __i1480_DFU_H__
#define __i1480_DFU_H__
-#include <linux/uwb/spec.h>
#include <linux/types.h>
#include <linux/completion.h>
+#include "../../include/spec.h"
#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018))
diff --git a/drivers/uwb/i1480/dfu/mac.c b/drivers/staging/uwb/i1480/dfu/mac.c
index ddc224f01a7f..6e4d6c9cecf5 100644
--- a/drivers/uwb/i1480/dfu/mac.c
+++ b/drivers/staging/uwb/i1480/dfu/mac.c
@@ -15,7 +15,7 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/slab.h>
-#include <linux/uwb.h>
+#include "../../uwb.h"
#include "i1480-dfu.h"
/*
diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/staging/uwb/i1480/dfu/phy.c
index 50da4527c113..13512c7dda0b 100644
--- a/drivers/uwb/i1480/dfu/phy.c
+++ b/drivers/staging/uwb/i1480/dfu/phy.c
@@ -15,7 +15,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
-#include <linux/usb/wusb.h>
+#include "../../../wusbcore/include/wusb.h"
#include "i1480-dfu.h"
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/staging/uwb/i1480/dfu/usb.c
index 6129a8f4b5f2..d41086bdd783 100644
--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/staging/uwb/i1480/dfu/usb.c
@@ -25,9 +25,9 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/delay.h>
-#include <linux/uwb.h>
-#include <linux/usb/wusb.h>
-#include <linux/usb/wusb-wa.h>
+#include "../../uwb.h"
+#include "../../../wusbcore/include/wusb.h"
+#include "../../../wusbcore/include/wusb-wa.h"
#include "i1480-dfu.h"
struct i1480_usb {
diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/staging/uwb/i1480/i1480-est.c
index 1346c409d10e..106e0a44b138 100644
--- a/drivers/uwb/i1480/i1480-est.c
+++ b/drivers/staging/uwb/i1480/i1480-est.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include <linux/uwb.h>
+#include "../uwb.h"
#include "dfu/i1480-dfu.h"
diff --git a/drivers/uwb/ie-rcv.c b/drivers/staging/uwb/ie-rcv.c
index 51a4706e0dd3..51a4706e0dd3 100644
--- a/drivers/uwb/ie-rcv.c
+++ b/drivers/staging/uwb/ie-rcv.c
diff --git a/drivers/uwb/ie.c b/drivers/staging/uwb/ie.c
index b11678dd0380..b11678dd0380 100644
--- a/drivers/uwb/ie.c
+++ b/drivers/staging/uwb/ie.c
diff --git a/drivers/staging/uwb/include/debug-cmd.h b/drivers/staging/uwb/include/debug-cmd.h
new file mode 100644
index 000000000000..f97db6c3bcc0
--- /dev/null
+++ b/drivers/staging/uwb/include/debug-cmd.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Ultra Wide Band
+ * Debug interface commands
+ *
+ * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
+ */
+#ifndef __LINUX__UWB__DEBUG_CMD_H__
+#define __LINUX__UWB__DEBUG_CMD_H__
+
+#include <linux/types.h>
+
+/*
+ * Debug interface commands
+ *
+ * UWB_DBG_CMD_RSV_ESTABLISH: Establish a new unicast reservation.
+ *
+ * UWB_DBG_CMD_RSV_TERMINATE: Terminate the Nth reservation.
+ */
+
+enum uwb_dbg_cmd_type {
+ UWB_DBG_CMD_RSV_ESTABLISH = 1,
+ UWB_DBG_CMD_RSV_TERMINATE = 2,
+ UWB_DBG_CMD_IE_ADD = 3,
+ UWB_DBG_CMD_IE_RM = 4,
+ UWB_DBG_CMD_RADIO_START = 5,
+ UWB_DBG_CMD_RADIO_STOP = 6,
+};
+
+struct uwb_dbg_cmd_rsv_establish {
+ __u8 target[6];
+ __u8 type;
+ __u16 max_mas;
+ __u16 min_mas;
+ __u8 max_interval;
+};
+
+struct uwb_dbg_cmd_rsv_terminate {
+ int index;
+};
+
+struct uwb_dbg_cmd_ie {
+ __u8 data[128];
+ int len;
+};
+
+struct uwb_dbg_cmd {
+ __u32 type;
+ union {
+ struct uwb_dbg_cmd_rsv_establish rsv_establish;
+ struct uwb_dbg_cmd_rsv_terminate rsv_terminate;
+ struct uwb_dbg_cmd_ie ie_add;
+ struct uwb_dbg_cmd_ie ie_rm;
+ };
+};
+
+#endif /* #ifndef __LINUX__UWB__DEBUG_CMD_H__ */
diff --git a/drivers/staging/uwb/include/spec.h b/drivers/staging/uwb/include/spec.h
new file mode 100644
index 000000000000..5f75caf7b4ba
--- /dev/null
+++ b/drivers/staging/uwb/include/spec.h
@@ -0,0 +1,767 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Ultra Wide Band
+ * UWB Standard definitions
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * All these definitions are based on the ECMA-368 standard.
+ *
+ * Note all definitions are Little Endian in the wire, and we will
+ * convert them to host order before operating on the bitfields (that
+ * yes, we use extensively).
+ */
+
+#ifndef __LINUX__UWB_SPEC_H__
+#define __LINUX__UWB_SPEC_H__
+
+#include <linux/types.h>
+#include <linux/bitmap.h>
+#include <linux/if_ether.h>
+
+#define i1480_FW 0x00000303
+/* #define i1480_FW 0x00000302 */
+
+/**
+ * Number of Medium Access Slots in a superframe.
+ *
+ * UWB divides time in SuperFrames, each one divided in 256 pieces, or
+ * Medium Access Slots. See MBOA MAC[5.4.5] for details. The MAS is the
+ * basic bandwidth allocation unit in UWB.
+ */
+enum { UWB_NUM_MAS = 256 };
+
+/**
+ * Number of Zones in superframe.
+ *
+ * UWB divides the superframe into zones with numbering starting from BPST.
+ * See MBOA MAC[16.8.6]
+ */
+enum { UWB_NUM_ZONES = 16 };
+
+/*
+ * Number of MAS in a zone.
+ */
+#define UWB_MAS_PER_ZONE (UWB_NUM_MAS / UWB_NUM_ZONES)
+
+/*
+ * Number of MAS required before a row can be considered available.
+ */
+#define UWB_USABLE_MAS_PER_ROW (UWB_NUM_ZONES - 1)
+
+/*
+ * Number of streams per DRP reservation between a pair of devices.
+ *
+ * [ECMA-368] section 16.8.6.
+ */
+enum { UWB_NUM_STREAMS = 8 };
+
+/*
+ * mMasLength
+ *
+ * The length of a MAS in microseconds.
+ *
+ * [ECMA-368] section 17.16.
+ */
+enum { UWB_MAS_LENGTH_US = 256 };
+
+/*
+ * mBeaconSlotLength
+ *
+ * The length of the beacon slot in microseconds.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_BEACON_SLOT_LENGTH_US = 85 };
+
+/*
+ * mMaxLostBeacons
+ *
+ * The number beacons missing in consecutive superframes before a
+ * device can be considered as unreachable.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_MAX_LOST_BEACONS = 3 };
+
+/*
+ * mDRPBackOffWinMin
+ *
+ * The minimum number of superframes to wait before trying to reserve
+ * extra MAS.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_DRP_BACKOFF_WIN_MIN = 2 };
+
+/*
+ * mDRPBackOffWinMax
+ *
+ * The maximum number of superframes to wait before trying to reserve
+ * extra MAS.
+ *
+ * [ECMA-368] section 17.16
+ */
+enum { UWB_DRP_BACKOFF_WIN_MAX = 16 };
+
+/*
+ * Length of a superframe in microseconds.
+ */
+#define UWB_SUPERFRAME_LENGTH_US (UWB_MAS_LENGTH_US * UWB_NUM_MAS)
+
+/**
+ * UWB MAC address
+ *
+ * It is *imperative* that this struct is exactly 6 packed bytes (as
+ * it is also used to define headers sent down and up the wire/radio).
+ */
+struct uwb_mac_addr {
+ u8 data[ETH_ALEN];
+} __attribute__((packed));
+
+
+/**
+ * UWB device address
+ *
+ * It is *imperative* that this struct is exactly 6 packed bytes (as
+ * it is also used to define headers sent down and up the wire/radio).
+ */
+struct uwb_dev_addr {
+ u8 data[2];
+} __attribute__((packed));
+
+
+/**
+ * Types of UWB addresses
+ *
+ * Order matters (by size).
+ */
+enum uwb_addr_type {
+ UWB_ADDR_DEV = 0,
+ UWB_ADDR_MAC = 1,
+};
+
+
+/** Size of a char buffer for printing a MAC/device address */
+enum { UWB_ADDR_STRSIZE = 32 };
+
+
+/** UWB WiMedia protocol IDs. */
+enum uwb_prid {
+ UWB_PRID_WLP_RESERVED = 0x0000,
+ UWB_PRID_WLP = 0x0001,
+ UWB_PRID_WUSB_BOT = 0x0010,
+ UWB_PRID_WUSB = 0x0010,
+ UWB_PRID_WUSB_TOP = 0x001F,
+};
+
+
+/** PHY Rate (MBOA MAC[7.8.12, Table 61]) */
+enum uwb_phy_rate {
+ UWB_PHY_RATE_53 = 0,
+ UWB_PHY_RATE_80,
+ UWB_PHY_RATE_106,
+ UWB_PHY_RATE_160,
+ UWB_PHY_RATE_200,
+ UWB_PHY_RATE_320,
+ UWB_PHY_RATE_400,
+ UWB_PHY_RATE_480,
+ UWB_PHY_RATE_INVALID
+};
+
+
+/**
+ * Different ways to scan (MBOA MAC[6.2.2, Table 8], WUSB[Table 8-78])
+ */
+enum uwb_scan_type {
+ UWB_SCAN_ONLY = 0,
+ UWB_SCAN_OUTSIDE_BP,
+ UWB_SCAN_WHILE_INACTIVE,
+ UWB_SCAN_DISABLED,
+ UWB_SCAN_ONLY_STARTTIME,
+ UWB_SCAN_TOP
+};
+
+
+/** ACK Policy types (MBOA MAC[7.2.1.3]) */
+enum uwb_ack_pol {
+ UWB_ACK_NO = 0,
+ UWB_ACK_INM = 1,
+ UWB_ACK_B = 2,
+ UWB_ACK_B_REQ = 3,
+};
+
+
+/** DRP reservation types ([ECMA-368 table 106) */
+enum uwb_drp_type {
+ UWB_DRP_TYPE_ALIEN_BP = 0,
+ UWB_DRP_TYPE_HARD,
+ UWB_DRP_TYPE_SOFT,
+ UWB_DRP_TYPE_PRIVATE,
+ UWB_DRP_TYPE_PCA,
+};
+
+
+/** DRP Reason Codes ([ECMA-368] table 107) */
+enum uwb_drp_reason {
+ UWB_DRP_REASON_ACCEPTED = 0,
+ UWB_DRP_REASON_CONFLICT,
+ UWB_DRP_REASON_PENDING,
+ UWB_DRP_REASON_DENIED,
+ UWB_DRP_REASON_MODIFIED,
+};
+
+/** Relinquish Request Reason Codes ([ECMA-368] table 113) */
+enum uwb_relinquish_req_reason {
+ UWB_RELINQUISH_REQ_REASON_NON_SPECIFIC = 0,
+ UWB_RELINQUISH_REQ_REASON_OVER_ALLOCATION,
+};
+
+/**
+ * DRP Notification Reason Codes (WHCI 0.95 [3.1.4.9])
+ */
+enum uwb_drp_notif_reason {
+ UWB_DRP_NOTIF_DRP_IE_RCVD = 0,
+ UWB_DRP_NOTIF_CONFLICT,
+ UWB_DRP_NOTIF_TERMINATE,
+};
+
+
+/** Allocation of MAS slots in a DRP request MBOA MAC[7.8.7] */
+struct uwb_drp_alloc {
+ __le16 zone_bm;
+ __le16 mas_bm;
+} __attribute__((packed));
+
+
+/** General MAC Header format (ECMA-368[16.2]) */
+struct uwb_mac_frame_hdr {
+ __le16 Frame_Control;
+ struct uwb_dev_addr DestAddr;
+ struct uwb_dev_addr SrcAddr;
+ __le16 Sequence_Control;
+ __le16 Access_Information;
+} __attribute__((packed));
+
+
+/**
+ * uwb_beacon_frame - a beacon frame including MAC headers
+ *
+ * [ECMA] section 16.3.
+ */
+struct uwb_beacon_frame {
+ struct uwb_mac_frame_hdr hdr;
+ struct uwb_mac_addr Device_Identifier; /* may be a NULL EUI-48 */
+ u8 Beacon_Slot_Number;
+ u8 Device_Control;
+ u8 IEData[];
+} __attribute__((packed));
+
+
+/** Information Element codes (MBOA MAC[T54]) */
+enum uwb_ie {
+ UWB_PCA_AVAILABILITY = 2,
+ UWB_IE_DRP_AVAILABILITY = 8,
+ UWB_IE_DRP = 9,
+ UWB_BP_SWITCH_IE = 11,
+ UWB_MAC_CAPABILITIES_IE = 12,
+ UWB_PHY_CAPABILITIES_IE = 13,
+ UWB_APP_SPEC_PROBE_IE = 15,
+ UWB_IDENTIFICATION_IE = 19,
+ UWB_MASTER_KEY_ID_IE = 20,
+ UWB_RELINQUISH_REQUEST_IE = 21,
+ UWB_IE_WLP = 250, /* WiMedia Logical Link Control Protocol WLP 0.99 */
+ UWB_APP_SPEC_IE = 255,
+};
+
+
+/**
+ * Header common to all Information Elements (IEs)
+ */
+struct uwb_ie_hdr {
+ u8 element_id; /* enum uwb_ie */
+ u8 length;
+} __attribute__((packed));
+
+
+/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.6]) */
+struct uwb_ie_drp {
+ struct uwb_ie_hdr hdr;
+ __le16 drp_control;
+ struct uwb_dev_addr dev_addr;
+ struct uwb_drp_alloc allocs[];
+} __attribute__((packed));
+
+static inline int uwb_ie_drp_type(struct uwb_ie_drp *ie)
+{
+ return (le16_to_cpu(ie->drp_control) >> 0) & 0x7;
+}
+
+static inline int uwb_ie_drp_stream_index(struct uwb_ie_drp *ie)
+{
+ return (le16_to_cpu(ie->drp_control) >> 3) & 0x7;
+}
+
+static inline int uwb_ie_drp_reason_code(struct uwb_ie_drp *ie)
+{
+ return (le16_to_cpu(ie->drp_control) >> 6) & 0x7;
+}
+
+static inline int uwb_ie_drp_status(struct uwb_ie_drp *ie)
+{
+ return (le16_to_cpu(ie->drp_control) >> 9) & 0x1;
+}
+
+static inline int uwb_ie_drp_owner(struct uwb_ie_drp *ie)
+{
+ return (le16_to_cpu(ie->drp_control) >> 10) & 0x1;
+}
+
+static inline int uwb_ie_drp_tiebreaker(struct uwb_ie_drp *ie)
+{
+ return (le16_to_cpu(ie->drp_control) >> 11) & 0x1;
+}
+
+static inline int uwb_ie_drp_unsafe(struct uwb_ie_drp *ie)
+{
+ return (le16_to_cpu(ie->drp_control) >> 12) & 0x1;
+}
+
+static inline void uwb_ie_drp_set_type(struct uwb_ie_drp *ie, enum uwb_drp_type type)
+{
+ u16 drp_control = le16_to_cpu(ie->drp_control);
+ drp_control = (drp_control & ~(0x7 << 0)) | (type << 0);
+ ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_stream_index(struct uwb_ie_drp *ie, int stream_index)
+{
+ u16 drp_control = le16_to_cpu(ie->drp_control);
+ drp_control = (drp_control & ~(0x7 << 3)) | (stream_index << 3);
+ ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_reason_code(struct uwb_ie_drp *ie,
+ enum uwb_drp_reason reason_code)
+{
+ u16 drp_control = le16_to_cpu(ie->drp_control);
+ drp_control = (ie->drp_control & ~(0x7 << 6)) | (reason_code << 6);
+ ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_status(struct uwb_ie_drp *ie, int status)
+{
+ u16 drp_control = le16_to_cpu(ie->drp_control);
+ drp_control = (drp_control & ~(0x1 << 9)) | (status << 9);
+ ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_owner(struct uwb_ie_drp *ie, int owner)
+{
+ u16 drp_control = le16_to_cpu(ie->drp_control);
+ drp_control = (drp_control & ~(0x1 << 10)) | (owner << 10);
+ ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_tiebreaker(struct uwb_ie_drp *ie, int tiebreaker)
+{
+ u16 drp_control = le16_to_cpu(ie->drp_control);
+ drp_control = (drp_control & ~(0x1 << 11)) | (tiebreaker << 11);
+ ie->drp_control = cpu_to_le16(drp_control);
+}
+
+static inline void uwb_ie_drp_set_unsafe(struct uwb_ie_drp *ie, int unsafe)
+{
+ u16 drp_control = le16_to_cpu(ie->drp_control);
+ drp_control = (drp_control & ~(0x1 << 12)) | (unsafe << 12);
+ ie->drp_control = cpu_to_le16(drp_control);
+}
+
+/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.7]) */
+struct uwb_ie_drp_avail {
+ struct uwb_ie_hdr hdr;
+ DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+} __attribute__((packed));
+
+/* Relinqish Request IE ([ECMA-368] section 16.8.19). */
+struct uwb_relinquish_request_ie {
+ struct uwb_ie_hdr hdr;
+ __le16 relinquish_req_control;
+ struct uwb_dev_addr dev_addr;
+ struct uwb_drp_alloc allocs[];
+} __attribute__((packed));
+
+static inline int uwb_ie_relinquish_req_reason_code(struct uwb_relinquish_request_ie *ie)
+{
+ return (le16_to_cpu(ie->relinquish_req_control) >> 0) & 0xf;
+}
+
+static inline void uwb_ie_relinquish_req_set_reason_code(struct uwb_relinquish_request_ie *ie,
+ int reason_code)
+{
+ u16 ctrl = le16_to_cpu(ie->relinquish_req_control);
+ ctrl = (ctrl & ~(0xf << 0)) | (reason_code << 0);
+ ie->relinquish_req_control = cpu_to_le16(ctrl);
+}
+
+/**
+ * The Vendor ID is set to an OUI that indicates the vendor of the device.
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_vendor_id {
+ u8 data[3];
+} __attribute__((packed));
+
+/**
+ * The device type ID
+ * FIXME: clarify what this means
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_device_type_id {
+ u8 data[3];
+} __attribute__((packed));
+
+
+/**
+ * UWB device information types
+ * ECMA-368 [16.8.10]
+ */
+enum uwb_dev_info_type {
+ UWB_DEV_INFO_VENDOR_ID = 0,
+ UWB_DEV_INFO_VENDOR_TYPE,
+ UWB_DEV_INFO_NAME,
+};
+
+/**
+ * UWB device information found in Identification IE
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_dev_info {
+ u8 type; /* enum uwb_dev_info_type */
+ u8 length;
+ u8 data[];
+} __attribute__((packed));
+
+/**
+ * UWB Identification IE
+ * ECMA-368 [16.8.10]
+ */
+struct uwb_identification_ie {
+ struct uwb_ie_hdr hdr;
+ struct uwb_dev_info info[];
+} __attribute__((packed));
+
+/*
+ * UWB Radio Controller
+ *
+ * These definitions are common to the Radio Control layers as
+ * exported by the WUSB1.0 HWA and WHCI interfaces.
+ */
+
+/** Radio Control Command Block (WUSB1.0[Table 8-65] and WHCI 0.95) */
+struct uwb_rccb {
+ u8 bCommandType; /* enum hwa_cet */
+ __le16 wCommand; /* Command code */
+ u8 bCommandContext; /* Context ID */
+} __attribute__((packed));
+
+
+/** Radio Control Event Block (WUSB[table 8-66], WHCI 0.95) */
+struct uwb_rceb {
+ u8 bEventType; /* enum hwa_cet */
+ __le16 wEvent; /* Event code */
+ u8 bEventContext; /* Context ID */
+} __attribute__((packed));
+
+
+enum {
+ UWB_RC_CET_GENERAL = 0, /* General Command/Event type */
+ UWB_RC_CET_EX_TYPE_1 = 1, /* Extended Type 1 Command/Event type */
+};
+
+/* Commands to the radio controller */
+enum uwb_rc_cmd {
+ UWB_RC_CMD_CHANNEL_CHANGE = 16,
+ UWB_RC_CMD_DEV_ADDR_MGMT = 17, /* Device Address Management */
+ UWB_RC_CMD_GET_IE = 18, /* GET Information Elements */
+ UWB_RC_CMD_RESET = 19,
+ UWB_RC_CMD_SCAN = 20, /* Scan management */
+ UWB_RC_CMD_SET_BEACON_FILTER = 21,
+ UWB_RC_CMD_SET_DRP_IE = 22, /* Dynamic Reservation Protocol IEs */
+ UWB_RC_CMD_SET_IE = 23, /* Information Element management */
+ UWB_RC_CMD_SET_NOTIFICATION_FILTER = 24,
+ UWB_RC_CMD_SET_TX_POWER = 25,
+ UWB_RC_CMD_SLEEP = 26,
+ UWB_RC_CMD_START_BEACON = 27,
+ UWB_RC_CMD_STOP_BEACON = 28,
+ UWB_RC_CMD_BP_MERGE = 29,
+ UWB_RC_CMD_SEND_COMMAND_FRAME = 30,
+ UWB_RC_CMD_SET_ASIE_NOTIF = 31,
+};
+
+/* Notifications from the radio controller */
+enum uwb_rc_evt {
+ UWB_RC_EVT_IE_RCV = 0,
+ UWB_RC_EVT_BEACON = 1,
+ UWB_RC_EVT_BEACON_SIZE = 2,
+ UWB_RC_EVT_BPOIE_CHANGE = 3,
+ UWB_RC_EVT_BP_SLOT_CHANGE = 4,
+ UWB_RC_EVT_BP_SWITCH_IE_RCV = 5,
+ UWB_RC_EVT_DEV_ADDR_CONFLICT = 6,
+ UWB_RC_EVT_DRP_AVAIL = 7,
+ UWB_RC_EVT_DRP = 8,
+ UWB_RC_EVT_BP_SWITCH_STATUS = 9,
+ UWB_RC_EVT_CMD_FRAME_RCV = 10,
+ UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV = 11,
+ /* Events (command responses) use the same code as the command */
+ UWB_RC_EVT_UNKNOWN_CMD_RCV = 65535,
+};
+
+enum uwb_rc_extended_type_1_cmd {
+ UWB_RC_SET_DAA_ENERGY_MASK = 32,
+ UWB_RC_SET_NOTIFICATION_FILTER_EX = 33,
+};
+
+enum uwb_rc_extended_type_1_evt {
+ UWB_RC_DAA_ENERGY_DETECTED = 0,
+};
+
+/* Radio Control Result Code. [WHCI] table 3-3. */
+enum {
+ UWB_RC_RES_SUCCESS = 0,
+ UWB_RC_RES_FAIL,
+ UWB_RC_RES_FAIL_HARDWARE,
+ UWB_RC_RES_FAIL_NO_SLOTS,
+ UWB_RC_RES_FAIL_BEACON_TOO_LARGE,
+ UWB_RC_RES_FAIL_INVALID_PARAMETER,
+ UWB_RC_RES_FAIL_UNSUPPORTED_PWR_LEVEL,
+ UWB_RC_RES_FAIL_INVALID_IE_DATA,
+ UWB_RC_RES_FAIL_BEACON_SIZE_EXCEEDED,
+ UWB_RC_RES_FAIL_CANCELLED,
+ UWB_RC_RES_FAIL_INVALID_STATE,
+ UWB_RC_RES_FAIL_INVALID_SIZE,
+ UWB_RC_RES_FAIL_ACK_NOT_RECEIVED,
+ UWB_RC_RES_FAIL_NO_MORE_ASIE_NOTIF,
+ UWB_RC_RES_FAIL_TIME_OUT = 255,
+};
+
+/* Confirm event. [WHCI] section 3.1.3.1 etc. */
+struct uwb_rc_evt_confirm {
+ struct uwb_rceb rceb;
+ u8 bResultCode;
+} __attribute__((packed));
+
+/* Device Address Management event. [WHCI] section 3.1.3.2. */
+struct uwb_rc_evt_dev_addr_mgmt {
+ struct uwb_rceb rceb;
+ u8 baAddr[ETH_ALEN];
+ u8 bResultCode;
+} __attribute__((packed));
+
+
+/* Get IE Event. [WHCI] section 3.1.3.3. */
+struct uwb_rc_evt_get_ie {
+ struct uwb_rceb rceb;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/* Set DRP IE Event. [WHCI] section 3.1.3.7. */
+struct uwb_rc_evt_set_drp_ie {
+ struct uwb_rceb rceb;
+ __le16 wRemainingSpace;
+ u8 bResultCode;
+} __attribute__((packed));
+
+/* Set IE Event. [WHCI] section 3.1.3.8. */
+struct uwb_rc_evt_set_ie {
+ struct uwb_rceb rceb;
+ __le16 RemainingSpace;
+ u8 bResultCode;
+} __attribute__((packed));
+
+/* Scan command. [WHCI] 3.1.3.5. */
+struct uwb_rc_cmd_scan {
+ struct uwb_rccb rccb;
+ u8 bChannelNumber;
+ u8 bScanState;
+ __le16 wStartTime;
+} __attribute__((packed));
+
+/* Set DRP IE command. [WHCI] section 3.1.3.7. */
+struct uwb_rc_cmd_set_drp_ie {
+ struct uwb_rccb rccb;
+ __le16 wIELength;
+ struct uwb_ie_drp IEData[];
+} __attribute__((packed));
+
+/* Set IE command. [WHCI] section 3.1.3.8. */
+struct uwb_rc_cmd_set_ie {
+ struct uwb_rccb rccb;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/* Set DAA Energy Mask event. [WHCI 0.96] section 3.1.3.17. */
+struct uwb_rc_evt_set_daa_energy_mask {
+ struct uwb_rceb rceb;
+ __le16 wLength;
+ u8 result;
+} __attribute__((packed));
+
+/* Set Notification Filter Extended event. [WHCI 0.96] section 3.1.3.18. */
+struct uwb_rc_evt_set_notification_filter_ex {
+ struct uwb_rceb rceb;
+ __le16 wLength;
+ u8 result;
+} __attribute__((packed));
+
+/* IE Received notification. [WHCI] section 3.1.4.1. */
+struct uwb_rc_evt_ie_rcv {
+ struct uwb_rceb rceb;
+ struct uwb_dev_addr SrcAddr;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/* Type of the received beacon. [WHCI] section 3.1.4.2. */
+enum uwb_rc_beacon_type {
+ UWB_RC_BEACON_TYPE_SCAN = 0,
+ UWB_RC_BEACON_TYPE_NEIGHBOR,
+ UWB_RC_BEACON_TYPE_OL_ALIEN,
+ UWB_RC_BEACON_TYPE_NOL_ALIEN,
+};
+
+/* Beacon received notification. [WHCI] 3.1.4.2. */
+struct uwb_rc_evt_beacon {
+ struct uwb_rceb rceb;
+ u8 bChannelNumber;
+ u8 bBeaconType;
+ __le16 wBPSTOffset;
+ u8 bLQI;
+ u8 bRSSI;
+ __le16 wBeaconInfoLength;
+ u8 BeaconInfo[];
+} __attribute__((packed));
+
+
+/* Beacon Size Change notification. [WHCI] section 3.1.4.3 */
+struct uwb_rc_evt_beacon_size {
+ struct uwb_rceb rceb;
+ __le16 wNewBeaconSize;
+} __attribute__((packed));
+
+
+/* BPOIE Change notification. [WHCI] section 3.1.4.4. */
+struct uwb_rc_evt_bpoie_change {
+ struct uwb_rceb rceb;
+ __le16 wBPOIELength;
+ u8 BPOIE[];
+} __attribute__((packed));
+
+
+/* Beacon Slot Change notification. [WHCI] section 3.1.4.5. */
+struct uwb_rc_evt_bp_slot_change {
+ struct uwb_rceb rceb;
+ u8 slot_info;
+} __attribute__((packed));
+
+static inline int uwb_rc_evt_bp_slot_change_slot_num(
+ const struct uwb_rc_evt_bp_slot_change *evt)
+{
+ return evt->slot_info & 0x7f;
+}
+
+static inline int uwb_rc_evt_bp_slot_change_no_slot(
+ const struct uwb_rc_evt_bp_slot_change *evt)
+{
+ return (evt->slot_info & 0x80) >> 7;
+}
+
+/* BP Switch IE Received notification. [WHCI] section 3.1.4.6. */
+struct uwb_rc_evt_bp_switch_ie_rcv {
+ struct uwb_rceb rceb;
+ struct uwb_dev_addr wSrcAddr;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/* DevAddr Conflict notification. [WHCI] section 3.1.4.7. */
+struct uwb_rc_evt_dev_addr_conflict {
+ struct uwb_rceb rceb;
+} __attribute__((packed));
+
+/* DRP notification. [WHCI] section 3.1.4.9. */
+struct uwb_rc_evt_drp {
+ struct uwb_rceb rceb;
+ struct uwb_dev_addr src_addr;
+ u8 reason;
+ u8 beacon_slot_number;
+ __le16 ie_length;
+ u8 ie_data[];
+} __attribute__((packed));
+
+static inline enum uwb_drp_notif_reason uwb_rc_evt_drp_reason(struct uwb_rc_evt_drp *evt)
+{
+ return evt->reason & 0x0f;
+}
+
+
+/* DRP Availability Change notification. [WHCI] section 3.1.4.8. */
+struct uwb_rc_evt_drp_avail {
+ struct uwb_rceb rceb;
+ DECLARE_BITMAP(bmp, UWB_NUM_MAS);
+} __attribute__((packed));
+
+/* BP switch status notification. [WHCI] section 3.1.4.10. */
+struct uwb_rc_evt_bp_switch_status {
+ struct uwb_rceb rceb;
+ u8 status;
+ u8 slot_offset;
+ __le16 bpst_offset;
+ u8 move_countdown;
+} __attribute__((packed));
+
+/* Command Frame Received notification. [WHCI] section 3.1.4.11. */
+struct uwb_rc_evt_cmd_frame_rcv {
+ struct uwb_rceb rceb;
+ __le16 receive_time;
+ struct uwb_dev_addr wSrcAddr;
+ struct uwb_dev_addr wDstAddr;
+ __le16 control;
+ __le16 reserved;
+ __le16 dataLength;
+ u8 data[];
+} __attribute__((packed));
+
+/* Channel Change IE Received notification. [WHCI] section 3.1.4.12. */
+struct uwb_rc_evt_channel_change_ie_rcv {
+ struct uwb_rceb rceb;
+ struct uwb_dev_addr wSrcAddr;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/* DAA Energy Detected notification. [WHCI 0.96] section 3.1.4.14. */
+struct uwb_rc_evt_daa_energy_detected {
+ struct uwb_rceb rceb;
+ __le16 wLength;
+ u8 bandID;
+ u8 reserved;
+ u8 toneBmp[16];
+} __attribute__((packed));
+
+
+/**
+ * Radio Control Interface Class Descriptor
+ *
+ * WUSB 1.0 [8.6.1.2]
+ */
+struct uwb_rc_control_intf_class_desc {
+ u8 bLength;
+ u8 bDescriptorType;
+ __le16 bcdRCIVersion;
+} __attribute__((packed));
+
+#endif /* #ifndef __LINUX__UWB_SPEC_H__ */
diff --git a/drivers/staging/uwb/include/umc.h b/drivers/staging/uwb/include/umc.h
new file mode 100644
index 000000000000..ddbceb39ad15
--- /dev/null
+++ b/drivers/staging/uwb/include/umc.h
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UWB Multi-interface Controller support.
+ *
+ * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
+ *
+ * UMC (UWB Multi-interface Controller) capabilities (e.g., radio
+ * controller, host controller) are presented as devices on the "umc"
+ * bus.
+ *
+ * The radio controller is not strictly a UMC capability but it's
+ * useful to present it as such.
+ *
+ * References:
+ *
+ * [WHCI] Wireless Host Controller Interface Specification for
+ * Certified Wireless Universal Serial Bus, revision 0.95.
+ *
+ * How this works is kind of convoluted but simple. The whci.ko driver
+ * loads when WHCI devices are detected. These WHCI devices expose
+ * many devices in the same PCI function (they couldn't have reused
+ * functions, no), so for each PCI function that exposes these many
+ * devices, whci ceates a umc_dev [whci_probe() -> whci_add_cap()]
+ * with umc_device_create() and adds it to the bus with
+ * umc_device_register().
+ *
+ * umc_device_register() calls device_register() which will push the
+ * bus management code to load your UMC driver's somehting_probe()
+ * that you have registered for that capability code.
+ *
+ * Now when the WHCI device is removed, whci_remove() will go over
+ * each umc_dev assigned to each of the PCI function's capabilities
+ * and through whci_del_cap() call umc_device_unregister() each
+ * created umc_dev. Of course, if you are bound to the device, your
+ * driver's something_remove() will be called.
+ */
+
+#ifndef _LINUX_UWB_UMC_H_
+#define _LINUX_UWB_UMC_H_
+
+#include <linux/device.h>
+#include <linux/pci.h>
+
+/*
+ * UMC capability IDs.
+ *
+ * 0x00 is reserved so use it for the radio controller device.
+ *
+ * [WHCI] table 2-8
+ */
+#define UMC_CAP_ID_WHCI_RC 0x00 /* radio controller */
+#define UMC_CAP_ID_WHCI_WUSB_HC 0x01 /* WUSB host controller */
+
+/**
+ * struct umc_dev - UMC capability device
+ *
+ * @version: version of the specification this capability conforms to.
+ * @cap_id: capability ID.
+ * @bar: PCI Bar (64 bit) where the resource lies
+ * @resource: register space resource.
+ * @irq: interrupt line.
+ */
+struct umc_dev {
+ u16 version;
+ u8 cap_id;
+ u8 bar;
+ struct resource resource;
+ unsigned irq;
+ struct device dev;
+};
+
+#define to_umc_dev(d) container_of(d, struct umc_dev, dev)
+
+/**
+ * struct umc_driver - UMC capability driver
+ * @cap_id: supported capability ID.
+ * @match: driver specific capability matching function.
+ * @match_data: driver specific data for match() (e.g., a
+ * table of pci_device_id's if umc_match_pci_id() is used).
+ */
+struct umc_driver {
+ char *name;
+ u8 cap_id;
+ int (*match)(struct umc_driver *, struct umc_dev *);
+ const void *match_data;
+
+ int (*probe)(struct umc_dev *);
+ void (*remove)(struct umc_dev *);
+ int (*pre_reset)(struct umc_dev *);
+ int (*post_reset)(struct umc_dev *);
+
+ struct device_driver driver;
+};
+
+#define to_umc_driver(d) container_of(d, struct umc_driver, driver)
+
+extern struct bus_type umc_bus_type;
+
+struct umc_dev *umc_device_create(struct device *parent, int n);
+int __must_check umc_device_register(struct umc_dev *umc);
+void umc_device_unregister(struct umc_dev *umc);
+
+int __must_check __umc_driver_register(struct umc_driver *umc_drv,
+ struct module *mod,
+ const char *mod_name);
+
+/**
+ * umc_driver_register - register a UMC capabiltity driver.
+ * @umc_drv: pointer to the driver.
+ */
+#define umc_driver_register(umc_drv) \
+ __umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME)
+
+void umc_driver_unregister(struct umc_driver *umc_drv);
+
+/*
+ * Utility function you can use to match (umc_driver->match) against a
+ * null-terminated array of 'struct pci_device_id' in
+ * umc_driver->match_data.
+ */
+int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc);
+
+/**
+ * umc_parent_pci_dev - return the UMC's parent PCI device or NULL if none
+ * @umc_dev: UMC device whose parent PCI device we are looking for
+ *
+ * DIRTY!!! DON'T RELY ON THIS
+ *
+ * FIXME: This is as dirty as it gets, but we need some way to check
+ * the correct type of umc_dev->parent (so that for example, we can
+ * cast to pci_dev). Casting to pci_dev is necessary because at some
+ * point we need to request resources from the device. Mapping is
+ * easily over come (ioremap and stuff are bus agnostic), but hooking
+ * up to some error handlers (such as pci error handlers) might need
+ * this.
+ *
+ * THIS might (probably will) be removed in the future, so don't count
+ * on it.
+ */
+static inline struct pci_dev *umc_parent_pci_dev(struct umc_dev *umc_dev)
+{
+ struct pci_dev *pci_dev = NULL;
+ if (dev_is_pci(umc_dev->dev.parent))
+ pci_dev = to_pci_dev(umc_dev->dev.parent);
+ return pci_dev;
+}
+
+/**
+ * umc_dev_get() - reference a UMC device.
+ * @umc_dev: Pointer to UMC device.
+ *
+ * NOTE: we are assuming in this whole scheme that the parent device
+ * is referenced at _probe() time and unreferenced at _remove()
+ * time by the parent's subsystem.
+ */
+static inline struct umc_dev *umc_dev_get(struct umc_dev *umc_dev)
+{
+ get_device(&umc_dev->dev);
+ return umc_dev;
+}
+
+/**
+ * umc_dev_put() - unreference a UMC device.
+ * @umc_dev: Pointer to UMC device.
+ */
+static inline void umc_dev_put(struct umc_dev *umc_dev)
+{
+ put_device(&umc_dev->dev);
+}
+
+/**
+ * umc_set_drvdata - set UMC device's driver data.
+ * @umc_dev: Pointer to UMC device.
+ * @data: Data to set.
+ */
+static inline void umc_set_drvdata(struct umc_dev *umc_dev, void *data)
+{
+ dev_set_drvdata(&umc_dev->dev, data);
+}
+
+/**
+ * umc_get_drvdata - recover UMC device's driver data.
+ * @umc_dev: Pointer to UMC device.
+ */
+static inline void *umc_get_drvdata(struct umc_dev *umc_dev)
+{
+ return dev_get_drvdata(&umc_dev->dev);
+}
+
+int umc_controller_reset(struct umc_dev *umc);
+
+#endif /* #ifndef _LINUX_UWB_UMC_H_ */
diff --git a/drivers/staging/uwb/include/whci.h b/drivers/staging/uwb/include/whci.h
new file mode 100644
index 000000000000..1a5c2cc2b008
--- /dev/null
+++ b/drivers/staging/uwb/include/whci.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Wireless Host Controller Interface for Ultra-Wide-Band and Wireless USB
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * References:
+ * [WHCI] Wireless Host Controller Interface Specification for
+ * Certified Wireless Universal Serial Bus, revision 0.95.
+ */
+#ifndef _LINUX_UWB_WHCI_H_
+#define _LINUX_UWB_WHCI_H_
+
+#include <linux/pci.h>
+
+/*
+ * UWB interface capability registers (offsets from UWBBASE)
+ *
+ * [WHCI] section 2.2
+ */
+#define UWBCAPINFO 0x00 /* == UWBCAPDATA(0) */
+# define UWBCAPINFO_TO_N_CAPS(c) (((c) >> 0) & 0xFull)
+#define UWBCAPDATA(n) (8*(n))
+# define UWBCAPDATA_TO_VERSION(c) (((c) >> 32) & 0xFFFFull)
+# define UWBCAPDATA_TO_OFFSET(c) (((c) >> 18) & 0x3FFFull)
+# define UWBCAPDATA_TO_BAR(c) (((c) >> 16) & 0x3ull)
+# define UWBCAPDATA_TO_SIZE(c) ((((c) >> 8) & 0xFFull) * sizeof(u32))
+# define UWBCAPDATA_TO_CAP_ID(c) (((c) >> 0) & 0xFFull)
+
+/* Size of the WHCI capability data (including the RC capability) for
+ a device with n capabilities. */
+#define UWBCAPDATA_SIZE(n) (8 + 8*(n))
+
+
+/*
+ * URC registers (offsets from URCBASE)
+ *
+ * [WHCI] section 2.3
+ */
+#define URCCMD 0x00
+# define URCCMD_RESET (1 << 31) /* UMC Hardware reset */
+# define URCCMD_RS (1 << 30) /* Run/Stop */
+# define URCCMD_EARV (1 << 29) /* Event Address Register Valid */
+# define URCCMD_ACTIVE (1 << 15) /* Command is active */
+# define URCCMD_IWR (1 << 14) /* Interrupt When Ready */
+# define URCCMD_SIZE_MASK 0x00000fff /* Command size mask */
+#define URCSTS 0x04
+# define URCSTS_EPS (1 << 17) /* Event Processing Status */
+# define URCSTS_HALTED (1 << 16) /* RC halted */
+# define URCSTS_HSE (1 << 10) /* Host System Error...fried */
+# define URCSTS_ER (1 << 9) /* Event Ready */
+# define URCSTS_RCI (1 << 8) /* Ready for Command Interrupt */
+# define URCSTS_INT_MASK 0x00000700 /* URC interrupt sources */
+# define URCSTS_ISI 0x000000ff /* Interrupt Source Identification */
+#define URCINTR 0x08
+# define URCINTR_EN_ALL 0x000007ff /* Enable all interrupt sources */
+#define URCCMDADDR 0x10
+#define URCEVTADDR 0x18
+# define URCEVTADDR_OFFSET_MASK 0xfff /* Event pointer offset mask */
+
+
+/** Write 32 bit @value to little endian register at @addr */
+static inline
+void le_writel(u32 value, void __iomem *addr)
+{
+ iowrite32(value, addr);
+}
+
+
+/** Read from 32 bit little endian register at @addr */
+static inline
+u32 le_readl(void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
+
+/** Write 64 bit @value to little endian register at @addr */
+static inline
+void le_writeq(u64 value, void __iomem *addr)
+{
+ iowrite32(value, addr);
+ iowrite32(value >> 32, addr + 4);
+}
+
+
+/** Read from 64 bit little endian register at @addr */
+static inline
+u64 le_readq(void __iomem *addr)
+{
+ u64 value;
+ value = ioread32(addr);
+ value |= (u64)ioread32(addr + 4) << 32;
+ return value;
+}
+
+extern int whci_wait_for(struct device *dev, u32 __iomem *reg,
+ u32 mask, u32 result,
+ unsigned long max_ms, const char *tag);
+
+#endif /* #ifndef _LINUX_UWB_WHCI_H_ */
diff --git a/drivers/uwb/lc-dev.c b/drivers/staging/uwb/lc-dev.c
index 3e5c07fd6b10..3e5c07fd6b10 100644
--- a/drivers/uwb/lc-dev.c
+++ b/drivers/staging/uwb/lc-dev.c
diff --git a/drivers/uwb/lc-rc.c b/drivers/staging/uwb/lc-rc.c
index ee31b221cdc2..ee31b221cdc2 100644
--- a/drivers/uwb/lc-rc.c
+++ b/drivers/staging/uwb/lc-rc.c
diff --git a/drivers/uwb/neh.c b/drivers/staging/uwb/neh.c
index 1695584be412..1695584be412 100644
--- a/drivers/uwb/neh.c
+++ b/drivers/staging/uwb/neh.c
diff --git a/drivers/uwb/pal.c b/drivers/staging/uwb/pal.c
index 765fd426dbd1..a541e646a603 100644
--- a/drivers/uwb/pal.c
+++ b/drivers/staging/uwb/pal.c
@@ -6,9 +6,9 @@
*/
#include <linux/kernel.h>
#include <linux/debugfs.h>
-#include <linux/uwb.h>
#include <linux/export.h>
+#include "uwb.h"
#include "uwb-internal.h"
/**
diff --git a/drivers/uwb/radio.c b/drivers/staging/uwb/radio.c
index 240dd755927e..6afb75ce1b5f 100644
--- a/drivers/uwb/radio.c
+++ b/drivers/staging/uwb/radio.c
@@ -5,9 +5,9 @@
* Copyright (C) 2008 Cambridge Silicon Radio Ltd.
*/
#include <linux/kernel.h>
-#include <linux/uwb.h>
#include <linux/export.h>
+#include "uwb.h"
#include "uwb-internal.h"
diff --git a/drivers/uwb/reset.c b/drivers/staging/uwb/reset.c
index 8fc7c14d903e..8fc7c14d903e 100644
--- a/drivers/uwb/reset.c
+++ b/drivers/staging/uwb/reset.c
diff --git a/drivers/uwb/rsv.c b/drivers/staging/uwb/rsv.c
index ec924deb0a32..f45a04ff7275 100644
--- a/drivers/uwb/rsv.c
+++ b/drivers/staging/uwb/rsv.c
@@ -5,11 +5,11 @@
* Copyright (C) 2008 Cambridge Silicon Radio Ltd.
*/
#include <linux/kernel.h>
-#include <linux/uwb.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/export.h>
+#include "uwb.h"
#include "uwb-internal.h"
static void uwb_rsv_timer(struct timer_list *t);
diff --git a/drivers/uwb/scan.c b/drivers/staging/uwb/scan.c
index ffc3f452302d..ffc3f452302d 100644
--- a/drivers/uwb/scan.c
+++ b/drivers/staging/uwb/scan.c
diff --git a/drivers/uwb/umc-bus.c b/drivers/staging/uwb/umc-bus.c
index 0fdc38078eee..8b931f66a720 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/staging/uwb/umc-bus.c
@@ -8,8 +8,8 @@
#include <linux/sysfs.h>
#include <linux/workqueue.h>
#include <linux/module.h>
-#include <linux/uwb/umc.h>
#include <linux/pci.h>
+#include "include/umc.h"
static int umc_bus_pre_reset_helper(struct device *dev, void *data)
{
diff --git a/drivers/uwb/umc-dev.c b/drivers/staging/uwb/umc-dev.c
index c845ca414bb2..0c71caae00be 100644
--- a/drivers/uwb/umc-dev.c
+++ b/drivers/staging/uwb/umc-dev.c
@@ -7,7 +7,7 @@
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/slab.h>
-#include <linux/uwb/umc.h>
+#include "include/umc.h"
static void umc_device_release(struct device *dev)
{
diff --git a/drivers/uwb/umc-drv.c b/drivers/staging/uwb/umc-drv.c
index b141d520efbf..ed3bd220e8c2 100644
--- a/drivers/uwb/umc-drv.c
+++ b/drivers/staging/uwb/umc-drv.c
@@ -6,7 +6,7 @@
*/
#include <linux/kernel.h>
#include <linux/export.h>
-#include <linux/uwb/umc.h>
+#include "include/umc.h"
int __umc_driver_register(struct umc_driver *umc_drv, struct module *module,
const char *mod_name)
diff --git a/drivers/uwb/uwb-debug.c b/drivers/staging/uwb/uwb-debug.c
index 5457b6d42387..dd14df219ef8 100644
--- a/drivers/uwb/uwb-debug.c
+++ b/drivers/staging/uwb/uwb-debug.c
@@ -19,8 +19,7 @@
#include <linux/uaccess.h>
#include <linux/seq_file.h>
-#include <linux/uwb/debug-cmd.h>
-
+#include "include/debug-cmd.h"
#include "uwb-internal.h"
/*
diff --git a/drivers/uwb/uwb-internal.h b/drivers/staging/uwb/uwb-internal.h
index 00de0a5333d2..4c2fdac7f610 100644
--- a/drivers/uwb/uwb-internal.h
+++ b/drivers/staging/uwb/uwb-internal.h
@@ -17,8 +17,8 @@
#include <linux/kernel.h>
#include <linux/device.h>
-#include <linux/uwb.h>
#include <linux/mutex.h>
+#include "uwb.h"
struct uwb_beca_e;
diff --git a/drivers/staging/uwb/uwb.h b/drivers/staging/uwb/uwb.h
new file mode 100644
index 000000000000..6a59706ba3a0
--- /dev/null
+++ b/drivers/staging/uwb/uwb.h
@@ -0,0 +1,817 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Ultra Wide Band
+ * UWB API
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * FIXME: doc: overview of the API, different parts and pointers
+ */
+
+#ifndef __LINUX__UWB_H__
+#define __LINUX__UWB_H__
+
+#include <linux/limits.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <asm/page.h>
+#include "include/spec.h"
+
+struct uwb_dev;
+struct uwb_beca_e;
+struct uwb_rc;
+struct uwb_rsv;
+struct uwb_dbg;
+
+/**
+ * struct uwb_dev - a UWB Device
+ * @rc: UWB Radio Controller that discovered the device (kind of its
+ * parent).
+ * @bce: a beacon cache entry for this device; or NULL if the device
+ * is a local radio controller.
+ * @mac_addr: the EUI-48 address of this device.
+ * @dev_addr: the current DevAddr used by this device.
+ * @beacon_slot: the slot number the beacon is using.
+ * @streams: bitmap of streams allocated to reservations targeted at
+ * this device. For an RC, this is the streams allocated for
+ * reservations targeted at DevAddrs.
+ *
+ * A UWB device may either by a neighbor or part of a local radio
+ * controller.
+ */
+struct uwb_dev {
+ struct mutex mutex;
+ struct list_head list_node;
+ struct device dev;
+ struct uwb_rc *rc; /* radio controller */
+ struct uwb_beca_e *bce; /* Beacon Cache Entry */
+
+ struct uwb_mac_addr mac_addr;
+ struct uwb_dev_addr dev_addr;
+ int beacon_slot;
+ DECLARE_BITMAP(streams, UWB_NUM_STREAMS);
+ DECLARE_BITMAP(last_availability_bm, UWB_NUM_MAS);
+};
+#define to_uwb_dev(d) container_of(d, struct uwb_dev, dev)
+
+/**
+ * UWB HWA/WHCI Radio Control {Command|Event} Block context IDs
+ *
+ * RC[CE]Bs have a 'context ID' field that matches the command with
+ * the event received to confirm it.
+ *
+ * Maximum number of context IDs
+ */
+enum { UWB_RC_CTX_MAX = 256 };
+
+
+/** Notification chain head for UWB generated events to listeners */
+struct uwb_notifs_chain {
+ struct list_head list;
+ struct mutex mutex;
+};
+
+/* Beacon cache list */
+struct uwb_beca {
+ struct list_head list;
+ size_t entries;
+ struct mutex mutex;
+};
+
+/* Event handling thread. */
+struct uwbd {
+ int pid;
+ struct task_struct *task;
+ wait_queue_head_t wq;
+ struct list_head event_list;
+ spinlock_t event_list_lock;
+};
+
+/**
+ * struct uwb_mas_bm - a bitmap of all MAS in a superframe
+ * @bm: a bitmap of length #UWB_NUM_MAS
+ */
+struct uwb_mas_bm {
+ DECLARE_BITMAP(bm, UWB_NUM_MAS);
+ DECLARE_BITMAP(unsafe_bm, UWB_NUM_MAS);
+ int safe;
+ int unsafe;
+};
+
+/**
+ * uwb_rsv_state - UWB Reservation state.
+ *
+ * NONE - reservation is not active (no DRP IE being transmitted).
+ *
+ * Owner reservation states:
+ *
+ * INITIATED - owner has sent an initial DRP request.
+ * PENDING - target responded with pending Reason Code.
+ * MODIFIED - reservation manager is modifying an established
+ * reservation with a different MAS allocation.
+ * ESTABLISHED - the reservation has been successfully negotiated.
+ *
+ * Target reservation states:
+ *
+ * DENIED - request is denied.
+ * ACCEPTED - request is accepted.
+ * PENDING - PAL has yet to make a decision to whether to accept or
+ * deny.
+ *
+ * FIXME: further target states TBD.
+ */
+enum uwb_rsv_state {
+ UWB_RSV_STATE_NONE = 0,
+ UWB_RSV_STATE_O_INITIATED,
+ UWB_RSV_STATE_O_PENDING,
+ UWB_RSV_STATE_O_MODIFIED,
+ UWB_RSV_STATE_O_ESTABLISHED,
+ UWB_RSV_STATE_O_TO_BE_MOVED,
+ UWB_RSV_STATE_O_MOVE_EXPANDING,
+ UWB_RSV_STATE_O_MOVE_COMBINING,
+ UWB_RSV_STATE_O_MOVE_REDUCING,
+ UWB_RSV_STATE_T_ACCEPTED,
+ UWB_RSV_STATE_T_DENIED,
+ UWB_RSV_STATE_T_CONFLICT,
+ UWB_RSV_STATE_T_PENDING,
+ UWB_RSV_STATE_T_EXPANDING_ACCEPTED,
+ UWB_RSV_STATE_T_EXPANDING_CONFLICT,
+ UWB_RSV_STATE_T_EXPANDING_PENDING,
+ UWB_RSV_STATE_T_EXPANDING_DENIED,
+ UWB_RSV_STATE_T_RESIZED,
+
+ UWB_RSV_STATE_LAST,
+};
+
+enum uwb_rsv_target_type {
+ UWB_RSV_TARGET_DEV,
+ UWB_RSV_TARGET_DEVADDR,
+};
+
+/**
+ * struct uwb_rsv_target - the target of a reservation.
+ *
+ * Reservations unicast and targeted at a single device
+ * (UWB_RSV_TARGET_DEV); or (e.g., in the case of WUSB) targeted at a
+ * specific (private) DevAddr (UWB_RSV_TARGET_DEVADDR).
+ */
+struct uwb_rsv_target {
+ enum uwb_rsv_target_type type;
+ union {
+ struct uwb_dev *dev;
+ struct uwb_dev_addr devaddr;
+ };
+};
+
+struct uwb_rsv_move {
+ struct uwb_mas_bm final_mas;
+ struct uwb_ie_drp *companion_drp_ie;
+ struct uwb_mas_bm companion_mas;
+};
+
+/*
+ * Number of streams reserved for reservations targeted at DevAddrs.
+ */
+#define UWB_NUM_GLOBAL_STREAMS 1
+
+typedef void (*uwb_rsv_cb_f)(struct uwb_rsv *rsv);
+
+/**
+ * struct uwb_rsv - a DRP reservation
+ *
+ * Data structure management:
+ *
+ * @rc: the radio controller this reservation is for
+ * (as target or owner)
+ * @rc_node: a list node for the RC
+ * @pal_node: a list node for the PAL
+ *
+ * Owner and target parameters:
+ *
+ * @owner: the UWB device owning this reservation
+ * @target: the target UWB device
+ * @type: reservation type
+ *
+ * Owner parameters:
+ *
+ * @max_mas: maxiumum number of MAS
+ * @min_mas: minimum number of MAS
+ * @sparsity: owner selected sparsity
+ * @is_multicast: true iff multicast
+ *
+ * @callback: callback function when the reservation completes
+ * @pal_priv: private data for the PAL making the reservation
+ *
+ * Reservation status:
+ *
+ * @status: negotiation status
+ * @stream: stream index allocated for this reservation
+ * @tiebreaker: conflict tiebreaker for this reservation
+ * @mas: reserved MAS
+ * @drp_ie: the DRP IE
+ * @ie_valid: true iff the DRP IE matches the reservation parameters
+ *
+ * DRP reservations are uniquely identified by the owner, target and
+ * stream index. However, when using a DevAddr as a target (e.g., for
+ * a WUSB cluster reservation) the responses may be received from
+ * devices with different DevAddrs. In this case, reservations are
+ * uniquely identified by just the stream index. A number of stream
+ * indexes (UWB_NUM_GLOBAL_STREAMS) are reserved for this.
+ */
+struct uwb_rsv {
+ struct uwb_rc *rc;
+ struct list_head rc_node;
+ struct list_head pal_node;
+ struct kref kref;
+
+ struct uwb_dev *owner;
+ struct uwb_rsv_target target;
+ enum uwb_drp_type type;
+ int max_mas;
+ int min_mas;
+ int max_interval;
+ bool is_multicast;
+
+ uwb_rsv_cb_f callback;
+ void *pal_priv;
+
+ enum uwb_rsv_state state;
+ bool needs_release_companion_mas;
+ u8 stream;
+ u8 tiebreaker;
+ struct uwb_mas_bm mas;
+ struct uwb_ie_drp *drp_ie;
+ struct uwb_rsv_move mv;
+ bool ie_valid;
+ struct timer_list timer;
+ struct work_struct handle_timeout_work;
+};
+
+static const
+struct uwb_mas_bm uwb_mas_bm_zero = { .bm = { 0 } };
+
+static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas)
+{
+ bitmap_copy_le(dst, mas->bm, UWB_NUM_MAS);
+}
+
+/**
+ * struct uwb_drp_avail - a radio controller's view of MAS usage
+ * @global: MAS unused by neighbors (excluding reservations targeted
+ * or owned by the local radio controller) or the beaon period
+ * @local: MAS unused by local established reservations
+ * @pending: MAS unused by local pending reservations
+ * @ie: DRP Availability IE to be included in the beacon
+ * @ie_valid: true iff @ie is valid and does not need to regenerated from
+ * @global and @local
+ *
+ * Each radio controller maintains a view of MAS usage or
+ * availability. MAS available for a new reservation are determined
+ * from the intersection of @global, @local, and @pending.
+ *
+ * The radio controller must transmit a DRP Availability IE that's the
+ * intersection of @global and @local.
+ *
+ * A set bit indicates the MAS is unused and available.
+ *
+ * rc->rsvs_mutex should be held before accessing this data structure.
+ *
+ * [ECMA-368] section 17.4.3.
+ */
+struct uwb_drp_avail {
+ DECLARE_BITMAP(global, UWB_NUM_MAS);
+ DECLARE_BITMAP(local, UWB_NUM_MAS);
+ DECLARE_BITMAP(pending, UWB_NUM_MAS);
+ struct uwb_ie_drp_avail ie;
+ bool ie_valid;
+};
+
+struct uwb_drp_backoff_win {
+ u8 window;
+ u8 n;
+ int total_expired;
+ struct timer_list timer;
+ bool can_reserve_extra_mases;
+};
+
+const char *uwb_rsv_state_str(enum uwb_rsv_state state);
+const char *uwb_rsv_type_str(enum uwb_drp_type type);
+
+struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb,
+ void *pal_priv);
+void uwb_rsv_destroy(struct uwb_rsv *rsv);
+
+int uwb_rsv_establish(struct uwb_rsv *rsv);
+int uwb_rsv_modify(struct uwb_rsv *rsv,
+ int max_mas, int min_mas, int sparsity);
+void uwb_rsv_terminate(struct uwb_rsv *rsv);
+
+void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv);
+
+void uwb_rsv_get_usable_mas(struct uwb_rsv *orig_rsv, struct uwb_mas_bm *mas);
+
+/**
+ * Radio Control Interface instance
+ *
+ *
+ * Life cycle rules: those of the UWB Device.
+ *
+ * @index: an index number for this radio controller, as used in the
+ * device name.
+ * @version: version of protocol supported by this device
+ * @priv: Backend implementation; rw with uwb_dev.dev.sem taken.
+ * @cmd: Backend implementation to execute commands; rw and call
+ * only with uwb_dev.dev.sem taken.
+ * @reset: Hardware reset of radio controller and any PAL controllers.
+ * @filter: Backend implementation to manipulate data to and from device
+ * to be compliant to specification assumed by driver (WHCI
+ * 0.95).
+ *
+ * uwb_dev.dev.mutex is used to execute commands and update
+ * the corresponding structures; can't use a spinlock
+ * because rc->cmd() can sleep.
+ * @ies: This is a dynamically allocated array cacheing the
+ * IEs (settable by the host) that the beacon of this
+ * radio controller is currently sending.
+ *
+ * In reality, we store here the full command we set to
+ * the radio controller (which is basically a command
+ * prefix followed by all the IEs the beacon currently
+ * contains). This way we don't have to realloc and
+ * memcpy when setting it.
+ *
+ * We set this up in uwb_rc_ie_setup(), where we alloc
+ * this struct, call get_ie() [so we know which IEs are
+ * currently being sent, if any].
+ *
+ * @ies_capacity:Amount of space (in bytes) allocated in @ies. The
+ * amount used is given by sizeof(*ies) plus ies->wIELength
+ * (which is a little endian quantity all the time).
+ * @ies_mutex: protect the IE cache
+ * @dbg: information for the debug interface
+ */
+struct uwb_rc {
+ struct uwb_dev uwb_dev;
+ int index;
+ u16 version;
+
+ struct module *owner;
+ void *priv;
+ int (*start)(struct uwb_rc *rc);
+ void (*stop)(struct uwb_rc *rc);
+ int (*cmd)(struct uwb_rc *, const struct uwb_rccb *, size_t);
+ int (*reset)(struct uwb_rc *rc);
+ int (*filter_cmd)(struct uwb_rc *, struct uwb_rccb **, size_t *);
+ int (*filter_event)(struct uwb_rc *, struct uwb_rceb **, const size_t,
+ size_t *, size_t *);
+
+ spinlock_t neh_lock; /* protects neh_* and ctx_* */
+ struct list_head neh_list; /* Open NE handles */
+ unsigned long ctx_bm[UWB_RC_CTX_MAX / 8 / sizeof(unsigned long)];
+ u8 ctx_roll;
+
+ int beaconing; /* Beaconing state [channel number] */
+ int beaconing_forced;
+ int scanning;
+ enum uwb_scan_type scan_type:3;
+ unsigned ready:1;
+ struct uwb_notifs_chain notifs_chain;
+ struct uwb_beca uwb_beca;
+
+ struct uwbd uwbd;
+
+ struct uwb_drp_backoff_win bow;
+ struct uwb_drp_avail drp_avail;
+ struct list_head reservations;
+ struct list_head cnflt_alien_list;
+ struct uwb_mas_bm cnflt_alien_bitmap;
+ struct mutex rsvs_mutex;
+ spinlock_t rsvs_lock;
+ struct workqueue_struct *rsv_workq;
+
+ struct delayed_work rsv_update_work;
+ struct delayed_work rsv_alien_bp_work;
+ int set_drp_ie_pending;
+ struct mutex ies_mutex;
+ struct uwb_rc_cmd_set_ie *ies;
+ size_t ies_capacity;
+
+ struct list_head pals;
+ int active_pals;
+
+ struct uwb_dbg *dbg;
+};
+
+
+/**
+ * struct uwb_pal - a UWB PAL
+ * @name: descriptive name for this PAL (wusbhc, wlp, etc.).
+ * @device: a device for the PAL. Used to link the PAL and the radio
+ * controller in sysfs.
+ * @rc: the radio controller the PAL uses.
+ * @channel_changed: called when the channel used by the radio changes.
+ * A channel of -1 means the channel has been stopped.
+ * @new_rsv: called when a peer requests a reservation (may be NULL if
+ * the PAL cannot accept reservation requests).
+ * @channel: channel being used by the PAL; 0 if the PAL isn't using
+ * the radio; -1 if the PAL wishes to use the radio but
+ * cannot.
+ * @debugfs_dir: a debugfs directory which the PAL can use for its own
+ * debugfs files.
+ *
+ * A Protocol Adaptation Layer (PAL) is a user of the WiMedia UWB
+ * radio platform (e.g., WUSB, WLP or Bluetooth UWB AMP).
+ *
+ * The PALs using a radio controller must register themselves to
+ * permit the UWB stack to coordinate usage of the radio between the
+ * various PALs or to allow PALs to response to certain requests from
+ * peers.
+ *
+ * A struct uwb_pal should be embedded in a containing structure
+ * belonging to the PAL and initialized with uwb_pal_init()). Fields
+ * should be set appropriately by the PAL before registering the PAL
+ * with uwb_pal_register().
+ */
+struct uwb_pal {
+ struct list_head node;
+ const char *name;
+ struct device *device;
+ struct uwb_rc *rc;
+
+ void (*channel_changed)(struct uwb_pal *pal, int channel);
+ void (*new_rsv)(struct uwb_pal *pal, struct uwb_rsv *rsv);
+
+ int channel;
+ struct dentry *debugfs_dir;
+};
+
+void uwb_pal_init(struct uwb_pal *pal);
+int uwb_pal_register(struct uwb_pal *pal);
+void uwb_pal_unregister(struct uwb_pal *pal);
+
+int uwb_radio_start(struct uwb_pal *pal);
+void uwb_radio_stop(struct uwb_pal *pal);
+
+/*
+ * General public API
+ *
+ * This API can be used by UWB device drivers or by those implementing
+ * UWB Radio Controllers
+ */
+struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
+ const struct uwb_dev_addr *devaddr);
+struct uwb_dev *uwb_dev_get_by_rc(struct uwb_dev *, struct uwb_rc *);
+static inline void uwb_dev_get(struct uwb_dev *uwb_dev)
+{
+ get_device(&uwb_dev->dev);
+}
+static inline void uwb_dev_put(struct uwb_dev *uwb_dev)
+{
+ put_device(&uwb_dev->dev);
+}
+struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev);
+
+/**
+ * Callback function for 'uwb_{dev,rc}_foreach()'.
+ *
+ * @dev: Linux device instance
+ * 'uwb_dev = container_of(dev, struct uwb_dev, dev)'
+ * @priv: Data passed by the caller to 'uwb_{dev,rc}_foreach()'.
+ *
+ * @returns: 0 to continue the iterations, any other val to stop
+ * iterating and return the value to the caller of
+ * _foreach().
+ */
+typedef int (*uwb_dev_for_each_f)(struct device *dev, void *priv);
+int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f func, void *priv);
+
+struct uwb_rc *uwb_rc_alloc(void);
+struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *);
+struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *);
+void uwb_rc_put(struct uwb_rc *rc);
+
+typedef void (*uwb_rc_cmd_cb_f)(struct uwb_rc *rc, void *arg,
+ struct uwb_rceb *reply, ssize_t reply_size);
+
+int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
+ struct uwb_rccb *cmd, size_t cmd_size,
+ u8 expected_type, u16 expected_event,
+ uwb_rc_cmd_cb_f cb, void *arg);
+ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
+ struct uwb_rccb *cmd, size_t cmd_size,
+ struct uwb_rceb *reply, size_t reply_size);
+ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
+ struct uwb_rccb *cmd, size_t cmd_size,
+ u8 expected_type, u16 expected_event,
+ struct uwb_rceb **preply);
+
+size_t __uwb_addr_print(char *, size_t, const unsigned char *, int);
+
+int uwb_rc_dev_addr_set(struct uwb_rc *, const struct uwb_dev_addr *);
+int uwb_rc_dev_addr_get(struct uwb_rc *, struct uwb_dev_addr *);
+int uwb_rc_mac_addr_set(struct uwb_rc *, const struct uwb_mac_addr *);
+int uwb_rc_mac_addr_get(struct uwb_rc *, struct uwb_mac_addr *);
+int __uwb_mac_addr_assigned_check(struct device *, void *);
+int __uwb_dev_addr_assigned_check(struct device *, void *);
+
+/* Print in @buf a pretty repr of @addr */
+static inline size_t uwb_dev_addr_print(char *buf, size_t buf_size,
+ const struct uwb_dev_addr *addr)
+{
+ return __uwb_addr_print(buf, buf_size, addr->data, 0);
+}
+
+/* Print in @buf a pretty repr of @addr */
+static inline size_t uwb_mac_addr_print(char *buf, size_t buf_size,
+ const struct uwb_mac_addr *addr)
+{
+ return __uwb_addr_print(buf, buf_size, addr->data, 1);
+}
+
+/* @returns 0 if device addresses @addr2 and @addr1 are equal */
+static inline int uwb_dev_addr_cmp(const struct uwb_dev_addr *addr1,
+ const struct uwb_dev_addr *addr2)
+{
+ return memcmp(addr1, addr2, sizeof(*addr1));
+}
+
+/* @returns 0 if MAC addresses @addr2 and @addr1 are equal */
+static inline int uwb_mac_addr_cmp(const struct uwb_mac_addr *addr1,
+ const struct uwb_mac_addr *addr2)
+{
+ return memcmp(addr1, addr2, sizeof(*addr1));
+}
+
+/* @returns !0 if a MAC @addr is a broadcast address */
+static inline int uwb_mac_addr_bcast(const struct uwb_mac_addr *addr)
+{
+ struct uwb_mac_addr bcast = {
+ .data = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }
+ };
+ return !uwb_mac_addr_cmp(addr, &bcast);
+}
+
+/* @returns !0 if a MAC @addr is all zeroes*/
+static inline int uwb_mac_addr_unset(const struct uwb_mac_addr *addr)
+{
+ struct uwb_mac_addr unset = {
+ .data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
+ };
+ return !uwb_mac_addr_cmp(addr, &unset);
+}
+
+/* @returns !0 if the address is in use. */
+static inline unsigned __uwb_dev_addr_assigned(struct uwb_rc *rc,
+ struct uwb_dev_addr *addr)
+{
+ return uwb_dev_for_each(rc, __uwb_dev_addr_assigned_check, addr);
+}
+
+/*
+ * UWB Radio Controller API
+ *
+ * This API is used (in addition to the general API) to implement UWB
+ * Radio Controllers.
+ */
+void uwb_rc_init(struct uwb_rc *);
+int uwb_rc_add(struct uwb_rc *, struct device *dev, void *rc_priv);
+void uwb_rc_rm(struct uwb_rc *);
+void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t);
+void uwb_rc_neh_error(struct uwb_rc *, int);
+void uwb_rc_reset_all(struct uwb_rc *rc);
+void uwb_rc_pre_reset(struct uwb_rc *rc);
+int uwb_rc_post_reset(struct uwb_rc *rc);
+
+/**
+ * uwb_rsv_is_owner - is the owner of this reservation the RC?
+ * @rsv: the reservation
+ */
+static inline bool uwb_rsv_is_owner(struct uwb_rsv *rsv)
+{
+ return rsv->owner == &rsv->rc->uwb_dev;
+}
+
+/**
+ * enum uwb_notifs - UWB events that can be passed to any listeners
+ * @UWB_NOTIF_ONAIR: a new neighbour has joined the beacon group.
+ * @UWB_NOTIF_OFFAIR: a neighbour has left the beacon group.
+ *
+ * Higher layers can register callback functions with the radio
+ * controller using uwb_notifs_register(). The radio controller
+ * maintains a list of all registered handlers and will notify all
+ * nodes when an event occurs.
+ */
+enum uwb_notifs {
+ UWB_NOTIF_ONAIR,
+ UWB_NOTIF_OFFAIR,
+};
+
+/* Callback function registered with UWB */
+struct uwb_notifs_handler {
+ struct list_head list_node;
+ void (*cb)(void *, struct uwb_dev *, enum uwb_notifs);
+ void *data;
+};
+
+int uwb_notifs_register(struct uwb_rc *, struct uwb_notifs_handler *);
+int uwb_notifs_deregister(struct uwb_rc *, struct uwb_notifs_handler *);
+
+
+/**
+ * UWB radio controller Event Size Entry (for creating entry tables)
+ *
+ * WUSB and WHCI define events and notifications, and they might have
+ * fixed or variable size.
+ *
+ * Each event/notification has a size which is not necessarily known
+ * in advance based on the event code. As well, vendor specific
+ * events/notifications will have a size impossible to determine
+ * unless we know about the device's specific details.
+ *
+ * It was way too smart of the spec writers not to think that it would
+ * be impossible for a generic driver to skip over vendor specific
+ * events/notifications if there are no LENGTH fields in the HEADER of
+ * each message...the transaction size cannot be counted on as the
+ * spec does not forbid to pack more than one event in a single
+ * transaction.
+ *
+ * Thus, we guess sizes with tables (or for events, when you know the
+ * size ahead of time you can use uwb_rc_neh_extra_size*()). We
+ * register tables with the known events and their sizes, and then we
+ * traverse those tables. For those with variable length, we provide a
+ * way to lookup the size inside the event/notification's
+ * payload. This allows device-specific event size tables to be
+ * registered.
+ *
+ * @size: Size of the payload
+ *
+ * @offset: if != 0, at offset @offset-1 starts a field with a length
+ * that has to be added to @size. The format of the field is
+ * given by @type.
+ *
+ * @type: Type and length of the offset field. Most common is LE 16
+ * bits (that's why that is zero); others are there mostly to
+ * cover for bugs and weirdos.
+ */
+struct uwb_est_entry {
+ size_t size;
+ unsigned offset;
+ enum { UWB_EST_16 = 0, UWB_EST_8 = 1 } type;
+};
+
+int uwb_est_register(u8 type, u8 code_high, u16 vendor, u16 product,
+ const struct uwb_est_entry *, size_t entries);
+int uwb_est_unregister(u8 type, u8 code_high, u16 vendor, u16 product,
+ const struct uwb_est_entry *, size_t entries);
+ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+ size_t len);
+
+/* -- Misc */
+
+enum {
+ EDC_MAX_ERRORS = 10,
+ EDC_ERROR_TIMEFRAME = HZ,
+};
+
+/* error density counter */
+struct edc {
+ unsigned long timestart;
+ u16 errorcount;
+};
+
+static inline
+void edc_init(struct edc *edc)
+{
+ edc->timestart = jiffies;
+}
+
+/* Called when an error occurred.
+ * This is way to determine if the number of acceptable errors per time
+ * period has been exceeded. It is not accurate as there are cases in which
+ * this scheme will not work, for example if there are periodic occurrences
+ * of errors that straddle updates to the start time. This scheme is
+ * sufficient for our usage.
+ *
+ * @returns 1 if maximum acceptable errors per timeframe has been exceeded.
+ */
+static inline int edc_inc(struct edc *err_hist, u16 max_err, u16 timeframe)
+{
+ unsigned long now;
+
+ now = jiffies;
+ if (now - err_hist->timestart > timeframe) {
+ err_hist->errorcount = 1;
+ err_hist->timestart = now;
+ } else if (++err_hist->errorcount > max_err) {
+ err_hist->errorcount = 0;
+ err_hist->timestart = now;
+ return 1;
+ }
+ return 0;
+}
+
+
+/* Information Element handling */
+
+struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len);
+int uwb_rc_ie_add(struct uwb_rc *uwb_rc, const struct uwb_ie_hdr *ies, size_t size);
+int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id);
+
+/*
+ * Transmission statistics
+ *
+ * UWB uses LQI and RSSI (one byte values) for reporting radio signal
+ * strength and line quality indication. We do quick and dirty
+ * averages of those. They are signed values, btw.
+ *
+ * For 8 bit quantities, we keep the min, the max, an accumulator
+ * (@sigma) and a # of samples. When @samples gets to 255, we compute
+ * the average (@sigma / @samples), place it in @sigma and reset
+ * @samples to 1 (so we use it as the first sample).
+ *
+ * Now, statistically speaking, probably I am kicking the kidneys of
+ * some books I have in my shelves collecting dust, but I just want to
+ * get an approx, not the Nobel.
+ *
+ * LOCKING: there is no locking per se, but we try to keep a lockless
+ * schema. Only _add_samples() modifies the values--as long as you
+ * have other locking on top that makes sure that no two calls of
+ * _add_sample() happen at the same time, then we are fine. Now, for
+ * resetting the values we just set @samples to 0 and that makes the
+ * next _add_sample() to start with defaults. Reading the values in
+ * _show() currently can race, so you need to make sure the calls are
+ * under the same lock that protects calls to _add_sample(). FIXME:
+ * currently unlocked (It is not ultraprecise but does the trick. Bite
+ * me).
+ */
+struct stats {
+ s8 min, max;
+ s16 sigma;
+ atomic_t samples;
+};
+
+static inline
+void stats_init(struct stats *stats)
+{
+ atomic_set(&stats->samples, 0);
+ wmb();
+}
+
+static inline
+void stats_add_sample(struct stats *stats, s8 sample)
+{
+ s8 min, max;
+ s16 sigma;
+ unsigned samples = atomic_read(&stats->samples);
+ if (samples == 0) { /* it was zero before, so we initialize */
+ min = 127;
+ max = -128;
+ sigma = 0;
+ } else {
+ min = stats->min;
+ max = stats->max;
+ sigma = stats->sigma;
+ }
+
+ if (sample < min) /* compute new values */
+ min = sample;
+ else if (sample > max)
+ max = sample;
+ sigma += sample;
+
+ stats->min = min; /* commit */
+ stats->max = max;
+ stats->sigma = sigma;
+ if (atomic_add_return(1, &stats->samples) > 255) {
+ /* wrapped around! reset */
+ stats->sigma = sigma / 256;
+ atomic_set(&stats->samples, 1);
+ }
+}
+
+static inline ssize_t stats_show(struct stats *stats, char *buf)
+{
+ int min, max, avg;
+ int samples = atomic_read(&stats->samples);
+ if (samples == 0)
+ min = max = avg = 0;
+ else {
+ min = stats->min;
+ max = stats->max;
+ avg = stats->sigma / samples;
+ }
+ return scnprintf(buf, PAGE_SIZE, "%d %d %d\n", min, max, avg);
+}
+
+static inline ssize_t stats_store(struct stats *stats, const char *buf,
+ size_t size)
+{
+ stats_init(stats);
+ return size;
+}
+
+#endif /* #ifndef __LINUX__UWB_H__ */
diff --git a/drivers/uwb/uwbd.c b/drivers/staging/uwb/uwbd.c
index dc5c743d4f5f..dc5c743d4f5f 100644
--- a/drivers/uwb/uwbd.c
+++ b/drivers/staging/uwb/uwbd.c
diff --git a/drivers/uwb/whc-rc.c b/drivers/staging/uwb/whc-rc.c
index 22397f70dee2..34020ed351ab 100644
--- a/drivers/uwb/whc-rc.c
+++ b/drivers/staging/uwb/whc-rc.c
@@ -33,9 +33,9 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
-#include <linux/uwb.h>
-#include <linux/uwb/whci.h>
-#include <linux/uwb/umc.h>
+#include "uwb.h"
+#include "include/whci.h"
+#include "include/umc.h"
#include "uwb-internal.h"
diff --git a/drivers/uwb/whci.c b/drivers/staging/uwb/whci.c
index be8a8b8e857b..a8832f64d708 100644
--- a/drivers/uwb/whci.c
+++ b/drivers/staging/uwb/whci.c
@@ -10,8 +10,8 @@
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <linux/uwb/whci.h>
-#include <linux/uwb/umc.h>
+#include "include/whci.h"
+#include "include/umc.h"
struct whci_card {
struct pci_dev *pci;
diff --git a/drivers/staging/wusbcore/Documentation/wusb-cbaf b/drivers/staging/wusbcore/Documentation/wusb-cbaf
new file mode 100644
index 000000000000..8b3d43efce90
--- /dev/null
+++ b/drivers/staging/wusbcore/Documentation/wusb-cbaf
@@ -0,0 +1,130 @@
+#! /bin/bash
+#
+
+set -e
+
+progname=$(basename $0)
+function help
+{
+ cat <<EOF
+Usage: $progname COMMAND DEVICEs [ARGS]
+
+Command for manipulating the pairing/authentication credentials of a
+Wireless USB device that supports wired-mode Cable-Based-Association.
+
+Works in conjunction with the wusb-cba.ko driver from http://linuxuwb.org.
+
+
+DEVICE
+
+ sysfs path to the device to authenticate; for example, both this
+ guys are the same:
+
+ /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.1
+ /sys/bus/usb/drivers/wusb-cbaf/1-4.4:1.1
+
+COMMAND/ARGS are
+
+ start
+
+ Start a WUSB host controller (by setting up a CHID)
+
+ set-chid DEVICE HOST-CHID HOST-BANDGROUP HOST-NAME
+
+ Sets host information in the device; after this you can call the
+ get-cdid to see how does this device report itself to us.
+
+ get-cdid DEVICE
+
+ Get the device ID associated to the HOST-CHID we sent with
+ 'set-chid'. We might not know about it.
+
+ set-cc DEVICE
+
+ If we allow the device to connect, set a random new CDID and CK
+ (connection key). Device saves them for the next time it wants to
+ connect wireless. We save them for that next time also so we can
+ authenticate the device (when we see the CDID he uses to id
+ itself) and the CK to crypto talk to it.
+
+CHID is always 16 hex bytes in 'XX YY ZZ...' form
+BANDGROUP is almost always 0001
+
+Examples:
+
+ You can default most arguments to '' to get a sane value:
+
+ $ $progname set-chid '' '' '' "My host name"
+
+ A full sequence:
+
+ $ $progname set-chid '' '' '' "My host name"
+ $ $progname get-cdid ''
+ $ $progname set-cc ''
+
+EOF
+}
+
+
+# Defaults
+# FIXME: CHID should come from a database :), band group from the host
+host_CHID="00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff"
+host_band_group="0001"
+host_name=$(hostname)
+
+devs="$(echo /sys/bus/usb/drivers/wusb-cbaf/[0-9]*)"
+hdevs="$(for h in /sys/class/uwb_rc/*/wusbhc; do readlink -f $h; done)"
+
+result=0
+case $1 in
+ start)
+ for dev in ${2:-$hdevs}
+ do
+ echo $host_CHID > $dev/wusb_chid
+ echo I: started host $(basename $dev) >&2
+ done
+ ;;
+ stop)
+ for dev in ${2:-$hdevs}
+ do
+ echo 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > $dev/wusb_chid
+ echo I: stopped host $(basename $dev) >&2
+ done
+ ;;
+ set-chid)
+ shift
+ for dev in ${2:-$devs}; do
+ echo "${4:-$host_name}" > $dev/wusb_host_name
+ echo "${3:-$host_band_group}" > $dev/wusb_host_band_groups
+ echo ${2:-$host_CHID} > $dev/wusb_chid
+ done
+ ;;
+ get-cdid)
+ for dev in ${2:-$devs}
+ do
+ cat $dev/wusb_cdid
+ done
+ ;;
+ set-cc)
+ for dev in ${2:-$devs}; do
+ shift
+ CDID="$(head --bytes=16 /dev/urandom | od -tx1 -An)"
+ CK="$(head --bytes=16 /dev/urandom | od -tx1 -An)"
+ echo "$CDID" > $dev/wusb_cdid
+ echo "$CK" > $dev/wusb_ck
+
+ echo I: CC set >&2
+ echo "CHID: $(cat $dev/wusb_chid)"
+ echo "CDID:$CDID"
+ echo "CK: $CK"
+ done
+ ;;
+ help|h|--help|-h)
+ help
+ ;;
+ *)
+ echo "E: Unknown usage" 1>&2
+ help 1>&2
+ result=1
+esac
+exit $result
diff --git a/drivers/staging/wusbcore/Documentation/wusb-design-overview.rst b/drivers/staging/wusbcore/Documentation/wusb-design-overview.rst
new file mode 100644
index 000000000000..dc5e21609bb5
--- /dev/null
+++ b/drivers/staging/wusbcore/Documentation/wusb-design-overview.rst
@@ -0,0 +1,457 @@
+================================
+Linux UWB + Wireless USB + WiNET
+================================
+
+ Copyright (C) 2005-2006 Intel Corporation
+
+ Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License version
+ 2 as published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA.
+
+
+Please visit http://bughost.org/thewiki/Design-overview.txt-1.8 for
+updated content.
+
+ * Design-overview.txt-1.8
+
+This code implements a Ultra Wide Band stack for Linux, as well as
+drivers for the USB based UWB radio controllers defined in the
+Wireless USB 1.0 specification (including Wireless USB host controller
+and an Intel WiNET controller).
+
+.. Contents
+ 1. Introduction
+ 1. HWA: Host Wire adapters, your Wireless USB dongle
+
+ 2. DWA: Device Wired Adaptor, a Wireless USB hub for wired
+ devices
+ 3. WHCI: Wireless Host Controller Interface, the PCI WUSB host
+ adapter
+ 2. The UWB stack
+ 1. Devices and hosts: the basic structure
+
+ 2. Host Controller life cycle
+
+ 3. On the air: beacons and enumerating the radio neighborhood
+
+ 4. Device lists
+ 5. Bandwidth allocation
+
+ 3. Wireless USB Host Controller drivers
+
+ 4. Glossary
+
+
+Introduction
+============
+
+UWB is a wide-band communication protocol that is to serve also as the
+low-level protocol for others (much like TCP sits on IP). Currently
+these others are Wireless USB and TCP/IP, but seems Bluetooth and
+Firewire/1394 are coming along.
+
+UWB uses a band from roughly 3 to 10 GHz, transmitting at a max of
+~-41dB (or 0.074 uW/MHz--geography specific data is still being
+negotiated w/ regulators, so watch for changes). That band is divided in
+a bunch of ~1.5 GHz wide channels (or band groups) composed of three
+subbands/subchannels (528 MHz each). Each channel is independent of each
+other, so you could consider them different "busses". Initially this
+driver considers them all a single one.
+
+Radio time is divided in 65536 us long /superframes/, each one divided
+in 256 256us long /MASs/ (Media Allocation Slots), which are the basic
+time/media allocation units for transferring data. At the beginning of
+each superframe there is a Beacon Period (BP), where every device
+transmit its beacon on a single MAS. The length of the BP depends on how
+many devices are present and the length of their beacons.
+
+Devices have a MAC (fixed, 48 bit address) and a device (changeable, 16
+bit address) and send periodic beacons to advertise themselves and pass
+info on what they are and do. They advertise their capabilities and a
+bunch of other stuff.
+
+The different logical parts of this driver are:
+
+ *
+
+ *UWB*: the Ultra-Wide-Band stack -- manages the radio and
+ associated spectrum to allow for devices sharing it. Allows to
+ control bandwidth assignment, beaconing, scanning, etc
+
+ *
+
+ *WUSB*: the layer that sits on top of UWB to provide Wireless USB.
+ The Wireless USB spec defines means to control a UWB radio and to
+ do the actual WUSB.
+
+
+HWA: Host Wire adapters, your Wireless USB dongle
+-------------------------------------------------
+
+WUSB also defines a device called a Host Wire Adaptor (HWA), which in
+mere terms is a USB dongle that enables your PC to have UWB and Wireless
+USB. The Wireless USB Host Controller in a HWA looks to the host like a
+[Wireless] USB controller connected via USB (!)
+
+The HWA itself is broken in two or three main interfaces:
+
+ *
+
+ *RC*: Radio control -- this implements an interface to the
+ Ultra-Wide-Band radio controller. The driver for this implements a
+ USB-based UWB Radio Controller to the UWB stack.
+
+ *
+
+ *HC*: the wireless USB host controller. It looks like a USB host
+ whose root port is the radio and the WUSB devices connect to it.
+ To the system it looks like a separate USB host. The driver (will)
+ implement a USB host controller (similar to UHCI, OHCI or EHCI)
+ for which the root hub is the radio...To reiterate: it is a USB
+ controller that is connected via USB instead of PCI.
+
+ *
+
+ *WINET*: some HW provide a WiNET interface (IP over UWB). This
+ package provides a driver for it (it looks like a network
+ interface, winetX). The driver detects when there is a link up for
+ their type and kick into gear.
+
+
+DWA: Device Wired Adaptor, a Wireless USB hub for wired devices
+---------------------------------------------------------------
+
+These are the complement to HWAs. They are a USB host for connecting
+wired devices, but it is connected to your PC connected via Wireless
+USB. To the system it looks like yet another USB host. To the untrained
+eye, it looks like a hub that connects upstream wirelessly.
+
+We still offer no support for this; however, it should share a lot of
+code with the HWA-RC driver; there is a bunch of factorization work that
+has been done to support that in upcoming releases.
+
+
+WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter
+-------------------------------------------------------------------
+
+This is your usual PCI device that implements WHCI. Similar in concept
+to EHCI, it allows your wireless USB devices (including DWAs) to connect
+to your host via a PCI interface. As in the case of the HWA, it has a
+Radio Control interface and the WUSB Host Controller interface per se.
+
+There is still no driver support for this, but will be in upcoming
+releases.
+
+
+The UWB stack
+=============
+
+The main mission of the UWB stack is to keep a tally of which devices
+are in radio proximity to allow drivers to connect to them. As well, it
+provides an API for controlling the local radio controllers (RCs from
+now on), such as to start/stop beaconing, scan, allocate bandwidth, etc.
+
+
+Devices and hosts: the basic structure
+--------------------------------------
+
+The main building block here is the UWB device (struct uwb_dev). For
+each device that pops up in radio presence (ie: the UWB host receives a
+beacon from it) you get a struct uwb_dev that will show up in
+/sys/bus/uwb/devices.
+
+For each RC that is detected, a new struct uwb_rc and struct uwb_dev are
+created. An entry is also created in /sys/class/uwb_rc for each RC.
+
+Each RC driver is implemented by a separate driver that plugs into the
+interface that the UWB stack provides through a struct uwb_rc_ops. The
+spec creators have been nice enough to make the message format the same
+for HWA and WHCI RCs, so the driver is really a very thin transport that
+moves the requests from the UWB API to the device [/uwb_rc_ops->cmd()/]
+and sends the replies and notifications back to the API
+[/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that
+is chartered, among other things, to keep the tab of how the UWB radio
+neighborhood looks, creating and destroying devices as they show up or
+disappear.
+
+Command execution is very simple: a command block is sent and a event
+block or reply is expected back. For sending/receiving command/events, a
+handle called /neh/ (Notification/Event Handle) is opened with
+/uwb_rc_neh_open()/.
+
+The HWA-RC (USB dongle) driver (drivers/uwb/hwa-rc.c) does this job for
+the USB connected HWA. Eventually, drivers/whci-rc.c will do the same
+for the PCI connected WHCI controller.
+
+
+Host Controller life cycle
+--------------------------
+
+So let's say we connect a dongle to the system: it is detected and
+firmware uploaded if needed [for Intel's i1480
+/drivers/uwb/ptc/usb.c:ptc_usb_probe()/] and then it is reenumerated.
+Now we have a real HWA device connected and
+/drivers/uwb/hwa-rc.c:hwarc_probe()/ picks it up, that will set up the
+Wire-Adaptor environment and then suck it into the UWB stack's vision of
+the world [/drivers/uwb/lc-rc.c:uwb_rc_add()/].
+
+ *
+
+ [*] The stack should put a new RC to scan for devices
+ [/uwb_rc_scan()/] so it finds what's available around and tries to
+ connect to them, but this is policy stuff and should be driven
+ from user space. As of now, the operator is expected to do it
+ manually; see the release notes for documentation on the procedure.
+
+When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/
+takes time of tearing everything down safely (or not...).
+
+
+On the air: beacons and enumerating the radio neighborhood
+----------------------------------------------------------
+
+So assuming we have devices and we have agreed for a channel to connect
+on (let's say 9), we put the new RC to beacon:
+
+ *
+
+ $ echo 9 0 > /sys/class/uwb_rc/uwb0/beacon
+
+Now it is visible. If there were other devices in the same radio channel
+and beacon group (that's what the zero is for), the dongle's radio
+control interface will send beacon notifications on its
+notification/event endpoint (NEEP). The beacon notifications are part of
+the event stream that is funneled into the API with
+/drivers/uwb/neh.c:uwb_rc_neh_grok()/ and delivered to the UWBD, the UWB
+daemon through a notification list.
+
+UWBD wakes up and scans the event list; finds a beacon and adds it to
+the BEACON CACHE (/uwb_beca/). If he receives a number of beacons from
+the same device, he considers it to be 'onair' and creates a new device
+[/drivers/uwb/lc-dev.c:uwbd_dev_onair()/]. Similarly, when no beacons
+are received in some time, the device is considered gone and wiped out
+[uwbd calls periodically /uwb/beacon.c:uwb_beca_purge()/ that will purge
+the beacon cache of dead devices].
+
+
+Device lists
+------------
+
+All UWB devices are kept in the list of the struct bus_type uwb_bus_type.
+
+
+Bandwidth allocation
+--------------------
+
+The UWB stack maintains a local copy of DRP availability through
+processing of incoming *DRP Availability Change* notifications. This
+local copy is currently used to present the current bandwidth
+availability to the user through the sysfs file
+/sys/class/uwb_rc/uwbx/bw_avail. In the future the bandwidth
+availability information will be used by the bandwidth reservation
+routines.
+
+The bandwidth reservation routines are in progress and are thus not
+present in the current release. When completed they will enable a user
+to initiate DRP reservation requests through interaction with sysfs. DRP
+reservation requests from remote UWB devices will also be handled. The
+bandwidth management done by the UWB stack will include callbacks to the
+higher layers will enable the higher layers to use the reservations upon
+completion. [Note: The bandwidth reservation work is in progress and
+subject to change.]
+
+
+Wireless USB Host Controller drivers
+====================================
+
+*WARNING* This section needs a lot of work!
+
+As explained above, there are three different types of HCs in the WUSB
+world: HWA-HC, DWA-HC and WHCI-HC.
+
+HWA-HC and DWA-HC share that they are Wire-Adapters (USB or WUSB
+connected controllers), and their transfer management system is almost
+identical. So is their notification delivery system.
+
+HWA-HC and WHCI-HC share that they are both WUSB host controllers, so
+they have to deal with WUSB device life cycle and maintenance, wireless
+root-hub
+
+HWA exposes a Host Controller interface (HWA-HC 0xe0/02/02). This has
+three endpoints (Notifications, Data Transfer In and Data Transfer
+Out--known as NEP, DTI and DTO in the code).
+
+We reserve UWB bandwidth for our Wireless USB Cluster, create a Cluster
+ID and tell the HC to use all that. Then we start it. This means the HC
+starts sending MMCs.
+
+ *
+
+ The MMCs are blocks of data defined somewhere in the WUSB1.0 spec
+ that define a stream in the UWB channel time allocated for sending
+ WUSB IEs (host to device commands/notifications) and Device
+ Notifications (device initiated to host). Each host defines a
+ unique Wireless USB cluster through MMCs. Devices can connect to a
+ single cluster at the time. The IEs are Information Elements, and
+ among them are the bandwidth allocations that tell each device
+ when can they transmit or receive.
+
+Now it all depends on external stimuli.
+
+New device connection
+---------------------
+
+A new device pops up, it scans the radio looking for MMCs that give out
+the existence of Wireless USB channels. Once one (or more) are found,
+selects which one to connect to. Sends a /DN_Connect/ (device
+notification connect) during the DNTS (Device Notification Time
+Slot--announced in the MMCs
+
+HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery
+into /devconnect/). This process starts the authentication process for
+the device. First we allocate a /fake port/ and assign an
+unauthenticated address (128 to 255--what we really do is
+0x80 | fake_port_idx). We fiddle with the fake port status and /hub_wq/
+sees a new connection, so he moves on to enable the fake port with a reset.
+
+So now we are in the reset path -- we know we have a non-yet enumerated
+device with an unauthorized address; we ask user space to authenticate
+(FIXME: not yet done, similar to bluetooth pairing), then we do the key
+exchange (FIXME: not yet done) and issue a /set address 0/ to bring the
+device to the default state. Device is authenticated.
+
+From here, the USB stack takes control through the usb_hcd ops. hub_wq
+has seen the port status changes, as we have been toggling them. It will
+start enumerating and doing transfers through usb_hcd->urb_enqueue() to
+read descriptors and move our data.
+
+Device life cycle and keep alives
+---------------------------------
+
+Every time there is a successful transfer to/from a device, we update a
+per-device activity timestamp. If not, every now and then we check and
+if the activity timestamp gets old, we ping the device by sending it a
+Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this
+arrives to us as a notification through
+devconnect.c:wusb_handle_dn_alive(). If a device times out, we
+disconnect it from the system (cleaning up internal information and
+toggling the bits in the fake hub port, which kicks hub_wq into removing
+the rest of the stuff).
+
+This is done through devconnect:__wusb_check_devs(), which will scan the
+device list looking for whom needs refreshing.
+
+If the device wants to disconnect, it will either die (ugly) or send a
+/DN_Disconnect/ that will prompt a disconnection from the system.
+
+Sending and receiving data
+--------------------------
+
+Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is
+/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and
+DWAs.
+
+Each HC has a number of rpipes and buffers that can be assigned to them;
+when doing a data transfer (xfer), first the rpipe has to be aimed and
+prepared (buffers assigned), then we can start queueing requests for
+data in or out.
+
+Data buffers have to be segmented out before sending--so we send first a
+header (segment request) and then if there is any data, a data buffer
+immediately after to the DTI interface (yep, even the request). If our
+buffer is bigger than the max segment size, then we just do multiple
+requests.
+
+[This sucks, because doing USB scatter gatter in Linux is resource
+intensive, if any...not that the current approach is not. It just has to
+be cleaned up a lot :)].
+
+If reading, we don't send data buffers, just the segment headers saying
+we want to read segments.
+
+When the xfer is executed, we receive a notification that says data is
+ready in the DTI endpoint (handled through
+xfer.c:wa_handle_notif_xfer()). In there we read from the DTI endpoint a
+descriptor that gives us the status of the transfer, its identification
+(given when we issued it) and the segment number. If it was a data read,
+we issue another URB to read into the destination buffer the chunk of
+data coming out of the remote endpoint. Done, wait for the next guy. The
+callbacks for the URBs issued from here are the ones that will declare
+the xfer complete at some point and call its callback.
+
+Seems simple, but the implementation is not trivial.
+
+ *
+
+ *WARNING* Old!!
+
+The main xfer descriptor, wa_xfer (equivalent to a URB) contains an
+array of segments, tallys on segments and buffers and callback
+information. Buried in there is a lot of URBs for executing the segments
+and buffer transfers.
+
+For OUT xfers, there is an array of segments, one URB for each, another
+one of buffer URB. When submitting, we submit URBs for segment request
+1, buffer 1, segment 2, buffer 2...etc. Then we wait on the DTI for xfer
+result data; when all the segments are complete, we call the callback to
+finalize the transfer.
+
+For IN xfers, we only issue URBs for the segments we want to read and
+then wait for the xfer result data.
+
+URB mapping into xfers
+^^^^^^^^^^^^^^^^^^^^^^
+
+This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an
+rpipe to the endpoint where we have to transmit, create a transfer
+context (wa_xfer) and submit it. When the xfer is done, our callback is
+called and we assign the status bits and release the xfer resources.
+
+In dequeue() we are basically cancelling/aborting the transfer. We issue
+a xfer abort request to the HC, cancel all the URBs we had submitted
+and not yet done and when all that is done, the xfer callback will be
+called--this will call the URB callback.
+
+
+Glossary
+========
+
+*DWA* -- Device Wire Adapter
+
+USB host, wired for downstream devices, upstream connects wirelessly
+with Wireless USB.
+
+*EVENT* -- Response to a command on the NEEP
+
+*HWA* -- Host Wire Adapter / USB dongle for UWB and Wireless USB
+
+*NEH* -- Notification/Event Handle
+
+Handle/file descriptor for receiving notifications or events. The WA
+code requires you to get one of this to listen for notifications or
+events on the NEEP.
+
+*NEEP* -- Notification/Event EndPoint
+
+Stuff related to the management of the first endpoint of a HWA USB
+dongle that is used to deliver an stream of events and notifications to
+the host.
+
+*NOTIFICATION* -- Message coming in the NEEP as response to something.
+
+*RC* -- Radio Control
+
+Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by
+InakyPerezGonzalez)
diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/staging/wusbcore/Kconfig
index abc0f361021f..a559d023b508 100644
--- a/drivers/usb/wusbcore/Kconfig
+++ b/drivers/staging/wusbcore/Kconfig
@@ -4,7 +4,7 @@
#
config USB_WUSB
tristate "Enable Wireless USB extensions"
- depends on UWB
+ depends on UWB && USB
select CRYPTO
select CRYPTO_AES
select CRYPTO_CCM
@@ -36,3 +36,4 @@ config USB_WUSB_CBAF_DEBUG
to the system log. Select this if you are having a problem with
CBA support and want to see more of what is going on.
+source "drivers/staging/wusbcore/host/Kconfig"
diff --git a/drivers/usb/wusbcore/Makefile b/drivers/staging/wusbcore/Makefile
index d604ccdd916f..b47b874268ac 100644
--- a/drivers/usb/wusbcore/Makefile
+++ b/drivers/staging/wusbcore/Makefile
@@ -24,3 +24,5 @@ wusb-wa-y := \
wa-nep.o \
wa-rpipe.o \
wa-xfer.o
+
+obj-y += host/
diff --git a/drivers/staging/wusbcore/TODO b/drivers/staging/wusbcore/TODO
new file mode 100644
index 000000000000..abae57000534
--- /dev/null
+++ b/drivers/staging/wusbcore/TODO
@@ -0,0 +1,8 @@
+TODO: Remove in late 2019 unless there are users
+
+There seems to not be any real wireless USB devices anywhere in the wild
+anymore. It turned out to be a failed technology :(
+
+This will be removed from the tree if no one objects.
+
+Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/staging/wusbcore/cbaf.c
index af77064c7456..57062eaf7558 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/staging/wusbcore/cbaf.c
@@ -80,9 +80,9 @@
#include <linux/random.h>
#include <linux/slab.h>
#include <linux/mutex.h>
-#include <linux/uwb.h>
-#include <linux/usb/wusb.h>
-#include <linux/usb/association.h>
+#include "../uwb/uwb.h"
+#include "include/wusb.h"
+#include "include/association.h"
#define CBA_NAME_LEN 0x40 /* [WUSB-AM] table 4-7 */
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/staging/wusbcore/crypto.c
index 9ee66483ee54..d7d55ed19a98 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/staging/wusbcore/crypto.c
@@ -38,10 +38,10 @@
#include <linux/crypto.h>
#include <linux/module.h>
#include <linux/err.h>
-#include <linux/uwb.h>
#include <linux/slab.h>
-#include <linux/usb/wusb.h>
#include <linux/scatterlist.h>
+#include "../uwb/uwb.h"
+#include "include/wusb.h"
static int debug_crypto_verify;
diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/staging/wusbcore/dev-sysfs.c
index 67b0a4c412b2..67b0a4c412b2 100644
--- a/drivers/usb/wusbcore/dev-sysfs.c
+++ b/drivers/staging/wusbcore/dev-sysfs.c
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/staging/wusbcore/devconnect.c
index a93837d57d53..1170f8baf608 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/staging/wusbcore/devconnect.c
@@ -49,7 +49,7 @@
* for processing a DN_Alive pong from a device.
*
* wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to
- * process a disconenct request from a
+ * process a disconnect request from a
* device.
*
* __wusb_dev_disable() Called by rh.c:wusbhc_rh_clear_port_feat() when
diff --git a/drivers/staging/wusbcore/host/Kconfig b/drivers/staging/wusbcore/host/Kconfig
new file mode 100644
index 000000000000..9a73f9360a08
--- /dev/null
+++ b/drivers/staging/wusbcore/host/Kconfig
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_WHCI_HCD
+ tristate "Wireless USB Host Controller Interface (WHCI) driver"
+ depends on USB_PCI && USB && UWB
+ select USB_WUSB
+ select UWB_WHCI
+ help
+ A driver for PCI-based Wireless USB Host Controllers that are
+ compliant with the WHCI specification.
+
+ To compile this driver a module, choose M here: the module
+ will be called "whci-hcd".
+
+config USB_HWA_HCD
+ tristate "Host Wire Adapter (HWA) driver"
+ depends on USB && UWB
+ select USB_WUSB
+ select UWB_HWA
+ help
+ This driver enables you to connect Wireless USB devices to
+ your system using a Host Wire Adaptor USB dongle. This is an
+ UWB Radio Controller and WUSB Host Controller connected to
+ your machine via USB (specified in WUSB1.0).
+
+ To compile this driver a module, choose M here: the module
+ will be called "hwa-hc".
+
diff --git a/drivers/staging/wusbcore/host/Makefile b/drivers/staging/wusbcore/host/Makefile
new file mode 100644
index 000000000000..d65ee8a73e21
--- /dev/null
+++ b/drivers/staging/wusbcore/host/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_USB_WHCI_HCD) += whci/
+obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/staging/wusbcore/host/hwa-hc.c
index 6968b9f2b76b..8d959e91fe27 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/staging/wusbcore/host/hwa-hc.c
@@ -45,8 +45,8 @@
#include <linux/workqueue.h>
#include <linux/wait.h>
#include <linux/completion.h>
-#include "../wusbcore/wa-hc.h"
-#include "../wusbcore/wusbhc.h"
+#include "../wa-hc.h"
+#include "../wusbhc.h"
struct hwahc {
struct wusbhc wusbhc; /* has to be 1st */
diff --git a/drivers/usb/host/whci/Makefile b/drivers/staging/wusbcore/host/whci/Makefile
index 859d20079df6..859d20079df6 100644
--- a/drivers/usb/host/whci/Makefile
+++ b/drivers/staging/wusbcore/host/whci/Makefile
diff --git a/drivers/usb/host/whci/asl.c b/drivers/staging/wusbcore/host/whci/asl.c
index 276fb34c8efd..a2b9a50cfb80 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/staging/wusbcore/host/whci/asl.c
@@ -7,10 +7,10 @@
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/dma-mapping.h>
-#include <linux/uwb/umc.h>
#include <linux/usb.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../../uwb/include/umc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/usb/host/whci/debug.c b/drivers/staging/wusbcore/host/whci/debug.c
index 8ddfe3f1f693..443da6719147 100644
--- a/drivers/usb/host/whci/debug.c
+++ b/drivers/staging/wusbcore/host/whci/debug.c
@@ -10,7 +10,7 @@
#include <linux/seq_file.h>
#include <linux/export.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/staging/wusbcore/host/whci/hcd.c
index 8af9dcfea127..bee1ff2d35be 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/staging/wusbcore/host/whci/hcd.c
@@ -7,9 +7,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/uwb/umc.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../../uwb/include/umc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/usb/host/whci/hw.c b/drivers/staging/wusbcore/host/whci/hw.c
index 22b3b7f7419d..e4e8914abf42 100644
--- a/drivers/usb/host/whci/hw.c
+++ b/drivers/staging/wusbcore/host/whci/hw.c
@@ -6,9 +6,9 @@
*/
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
-#include <linux/uwb/umc.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../../uwb/include/umc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/usb/host/whci/init.c b/drivers/staging/wusbcore/host/whci/init.c
index 82416973f773..55fd458a8f30 100644
--- a/drivers/usb/host/whci/init.c
+++ b/drivers/staging/wusbcore/host/whci/init.c
@@ -7,9 +7,9 @@
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/dma-mapping.h>
-#include <linux/uwb/umc.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../../uwb/include/umc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/usb/host/whci/int.c b/drivers/staging/wusbcore/host/whci/int.c
index 7e4ad1b8f3e3..bdbe35e9366f 100644
--- a/drivers/usb/host/whci/int.c
+++ b/drivers/staging/wusbcore/host/whci/int.c
@@ -5,9 +5,9 @@
* Copyright (C) 2007 Cambridge Silicon Radio Ltd.
*/
#include <linux/kernel.h>
-#include <linux/uwb/umc.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../../uwb/include/umc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/staging/wusbcore/host/whci/pzl.c
index ef52aeb02fde..6dfc075f5798 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/staging/wusbcore/host/whci/pzl.c
@@ -7,10 +7,10 @@
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/dma-mapping.h>
-#include <linux/uwb/umc.h>
#include <linux/usb.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../../uwb/include/umc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/usb/host/whci/qset.c b/drivers/staging/wusbcore/host/whci/qset.c
index 925166a207aa..66459b77dc77 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/staging/wusbcore/host/whci/qset.c
@@ -7,10 +7,10 @@
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <linux/uwb/umc.h>
#include <linux/usb.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../../uwb/include/umc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/staging/wusbcore/host/whci/whcd.h
index 139476997e7c..a442a2589e83 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/staging/wusbcore/host/whci/whcd.h
@@ -7,10 +7,10 @@
#ifndef __WHCD_H
#define __WHCD_H
-#include <linux/uwb/whci.h>
-#include <linux/uwb/umc.h>
#include <linux/workqueue.h>
+#include "../../../uwb/include/whci.h"
+#include "../../../uwb/include/umc.h"
#include "whci-hc.h"
/* Generic command timeout. */
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/staging/wusbcore/host/whci/whci-hc.h
index 5a86a57a80cc..5a86a57a80cc 100644
--- a/drivers/usb/host/whci/whci-hc.h
+++ b/drivers/staging/wusbcore/host/whci/whci-hc.h
diff --git a/drivers/usb/host/whci/wusb.c b/drivers/staging/wusbcore/host/whci/wusb.c
index 8a4d805ff63a..6d0068ab35e4 100644
--- a/drivers/usb/host/whci/wusb.c
+++ b/drivers/staging/wusbcore/host/whci/wusb.c
@@ -5,9 +5,9 @@
* Copyright (C) 2007 Cambridge Silicon Radio Ltd.
*/
#include <linux/kernel.h>
-#include <linux/uwb/umc.h>
-#include "../../wusbcore/wusbhc.h"
+#include "../../../uwb/include/umc.h"
+#include "../../wusbhc.h"
#include "whcd.h"
diff --git a/drivers/staging/wusbcore/include/association.h b/drivers/staging/wusbcore/include/association.h
new file mode 100644
index 000000000000..d7f3cb9b9db5
--- /dev/null
+++ b/drivers/staging/wusbcore/include/association.h
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Wireless USB - Cable Based Association
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_USB_ASSOCIATION_H
+#define __LINUX_USB_ASSOCIATION_H
+
+
+/*
+ * Association attributes
+ *
+ * Association Models Supplement to WUSB 1.0 T[3-1]
+ *
+ * Each field in the structures has it's ID, it's length and then the
+ * value. This is the actual definition of the field's ID and its
+ * length.
+ */
+struct wusb_am_attr {
+ __u8 id;
+ __u8 len;
+};
+
+/* Different fields defined by the spec */
+#define WUSB_AR_AssociationTypeId { .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) }
+#define WUSB_AR_AssociationSubTypeId { .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) }
+#define WUSB_AR_Length { .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) }
+#define WUSB_AR_AssociationStatus { .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) }
+#define WUSB_AR_LangID { .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) }
+#define WUSB_AR_DeviceFriendlyName { .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_HostFriendlyName { .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_CHID { .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) }
+#define WUSB_AR_CDID { .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) }
+#define WUSB_AR_ConnectionContext { .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) }
+#define WUSB_AR_BandGroups { .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) }
+
+/* CBAF Control Requests (AMS1.0[T4-1] */
+enum {
+ CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01,
+ CBAF_REQ_GET_ASSOCIATION_REQUEST,
+ CBAF_REQ_SET_ASSOCIATION_RESPONSE
+};
+
+/*
+ * CBAF USB-interface defitions
+ *
+ * No altsettings, one optional interrupt endpoint.
+ */
+enum {
+ CBAF_IFACECLASS = 0xef,
+ CBAF_IFACESUBCLASS = 0x03,
+ CBAF_IFACEPROTOCOL = 0x01,
+};
+
+/* Association Information (AMS1.0[T4-3]) */
+struct wusb_cbaf_assoc_info {
+ __le16 Length;
+ __u8 NumAssociationRequests;
+ __le16 Flags;
+ __u8 AssociationRequestsArray[];
+} __attribute__((packed));
+
+/* Association Request (AMS1.0[T4-4]) */
+struct wusb_cbaf_assoc_request {
+ __u8 AssociationDataIndex;
+ __u8 Reserved;
+ __le16 AssociationTypeId;
+ __le16 AssociationSubTypeId;
+ __le32 AssociationTypeInfoSize;
+} __attribute__((packed));
+
+enum {
+ AR_TYPE_WUSB = 0x0001,
+ AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000,
+ AR_TYPE_WUSB_ASSOCIATE = 0x0001,
+};
+
+/* Association Attribute header (AMS1.0[3.8]) */
+struct wusb_cbaf_attr_hdr {
+ __le16 id;
+ __le16 len;
+} __attribute__((packed));
+
+/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */
+struct wusb_cbaf_host_info {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr CHID_hdr;
+ struct wusb_ckhdid CHID;
+ struct wusb_cbaf_attr_hdr LangID_hdr;
+ __le16 LangID;
+ struct wusb_cbaf_attr_hdr HostFriendlyName_hdr;
+ __u8 HostFriendlyName[];
+} __attribute__((packed));
+
+/* Device Info (AMS1.0[T4-8])
+ *
+ * I still don't get this tag'n'header stuff for each goddamn
+ * field...
+ */
+struct wusb_cbaf_device_info {
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le32 Length;
+ struct wusb_cbaf_attr_hdr CDID_hdr;
+ struct wusb_ckhdid CDID;
+ struct wusb_cbaf_attr_hdr BandGroups_hdr;
+ __le16 BandGroups;
+ struct wusb_cbaf_attr_hdr LangID_hdr;
+ __le16 LangID;
+ struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr;
+ __u8 DeviceFriendlyName[];
+} __attribute__((packed));
+
+/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */
+struct wusb_cbaf_cc_data {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le32 Length;
+ struct wusb_cbaf_attr_hdr ConnectionContext_hdr;
+ struct wusb_ckhdid CHID;
+ struct wusb_ckhdid CDID;
+ struct wusb_ckhdid CK;
+ struct wusb_cbaf_attr_hdr BandGroups_hdr;
+ __le16 BandGroups;
+} __attribute__((packed));
+
+/* CC_DATA - Failure case (AMS1.0[T4-10]) */
+struct wusb_cbaf_cc_data_fail {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le16 Length;
+ struct wusb_cbaf_attr_hdr AssociationStatus_hdr;
+ __u32 AssociationStatus;
+} __attribute__((packed));
+
+#endif /* __LINUX_USB_ASSOCIATION_H */
diff --git a/drivers/staging/wusbcore/include/wusb-wa.h b/drivers/staging/wusbcore/include/wusb-wa.h
new file mode 100644
index 000000000000..64a840b5106e
--- /dev/null
+++ b/drivers/staging/wusbcore/include/wusb-wa.h
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Wireless USB Wire Adapter constants and structures.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation.
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ *
+ * References:
+ * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
+ */
+#ifndef __LINUX_USB_WUSB_WA_H
+#define __LINUX_USB_WUSB_WA_H
+
+/**
+ * Radio Command Request for the Radio Control Interface
+ *
+ * Radio Control Interface command and event codes are the same as
+ * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
+ */
+enum {
+ WA_EXEC_RC_CMD = 40, /* Radio Control command Request */
+};
+
+/* Wireless Adapter Requests ([WUSB] table 8-51) */
+enum {
+ WUSB_REQ_ADD_MMC_IE = 20,
+ WUSB_REQ_REMOVE_MMC_IE = 21,
+ WUSB_REQ_SET_NUM_DNTS = 22,
+ WUSB_REQ_SET_CLUSTER_ID = 23,
+ WUSB_REQ_SET_DEV_INFO = 24,
+ WUSB_REQ_GET_TIME = 25,
+ WUSB_REQ_SET_STREAM_IDX = 26,
+ WUSB_REQ_SET_WUSB_MAS = 27,
+ WUSB_REQ_CHAN_STOP = 28,
+};
+
+
+/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
+enum {
+ WUSB_TIME_ADJ = 0,
+ WUSB_TIME_BPST = 1,
+ WUSB_TIME_WUSB = 2,
+};
+
+enum {
+ WA_ENABLE = 0x01,
+ WA_RESET = 0x02,
+ RPIPE_PAUSE = 0x1,
+ RPIPE_STALL = 0x2,
+};
+
+/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
+enum {
+ WA_STATUS_ENABLED = 0x01,
+ WA_STATUS_RESETTING = 0x02
+};
+
+enum rpipe_crs {
+ RPIPE_CRS_CTL = 0x01,
+ RPIPE_CRS_ISO = 0x02,
+ RPIPE_CRS_BULK = 0x04,
+ RPIPE_CRS_INTR = 0x08
+};
+
+/**
+ * RPipe descriptor ([WUSB] section 8.5.2.11)
+ *
+ * FIXME: explain rpipes
+ */
+struct usb_rpipe_descriptor {
+ u8 bLength;
+ u8 bDescriptorType;
+ __le16 wRPipeIndex;
+ __le16 wRequests;
+ __le16 wBlocks; /* rw if 0 */
+ __le16 wMaxPacketSize; /* rw */
+ union {
+ u8 dwa_bHSHubAddress; /* rw: DWA. */
+ u8 hwa_bMaxBurst; /* rw: HWA. */
+ };
+ union {
+ u8 dwa_bHSHubPort; /* rw: DWA. */
+ u8 hwa_bDeviceInfoIndex; /* rw: HWA. */
+ };
+ u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */
+ union {
+ u8 dwa_bDeviceAddress; /* rw: DWA Target device address. */
+ u8 hwa_reserved; /* rw: HWA. */
+ };
+ u8 bEndpointAddress; /* rw: Target EP address */
+ u8 bDataSequence; /* ro: Current Data sequence */
+ __le32 dwCurrentWindow; /* ro */
+ u8 bMaxDataSequence; /* ro?: max supported seq */
+ u8 bInterval; /* rw: */
+ u8 bOverTheAirInterval; /* rw: */
+ u8 bmAttribute; /* ro? */
+ u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */
+ u8 bmRetryOptions; /* rw? */
+ __le16 wNumTransactionErrors; /* rw */
+} __attribute__ ((packed));
+
+/**
+ * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
+ *
+ * These are the notifications coming on the notification endpoint of
+ * an HWA and a DWA.
+ */
+enum wa_notif_type {
+ DWA_NOTIF_RWAKE = 0x91,
+ DWA_NOTIF_PORTSTATUS = 0x92,
+ WA_NOTIF_TRANSFER = 0x93,
+ HWA_NOTIF_BPST_ADJ = 0x94,
+ HWA_NOTIF_DN = 0x95,
+};
+
+/**
+ * Wire Adapter notification header
+ *
+ * Notifications coming from a wire adapter use a common header
+ * defined in [WUSB] sections 8.4.5 & 8.5.4.
+ */
+struct wa_notif_hdr {
+ u8 bLength;
+ u8 bNotifyType; /* enum wa_notif_type */
+} __packed;
+
+/**
+ * HWA DN Received notification [(WUSB] section 8.5.4.2)
+ *
+ * The DNData is specified in WUSB1.0[7.6]. For each device
+ * notification we received, we just need to dispatch it.
+ *
+ * @dndata: this is really an array of notifications, but all start
+ * with the same header.
+ */
+struct hwa_notif_dn {
+ struct wa_notif_hdr hdr;
+ u8 bSourceDeviceAddr; /* from errata 2005/07 */
+ u8 bmAttributes;
+ struct wusb_dn_hdr dndata[];
+} __packed;
+
+/* [WUSB] section 8.3.3 */
+enum wa_xfer_type {
+ WA_XFER_TYPE_CTL = 0x80,
+ WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */
+ WA_XFER_TYPE_ISO = 0x82,
+ WA_XFER_RESULT = 0x83,
+ WA_XFER_ABORT = 0x84,
+ WA_XFER_ISO_PACKET_INFO = 0xA0,
+ WA_XFER_ISO_PACKET_STATUS = 0xA1,
+};
+
+/* [WUSB] section 8.3.3 */
+struct wa_xfer_hdr {
+ u8 bLength; /* 0x18 */
+ u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */
+ __le16 wRPipe; /* RPipe index */
+ __le32 dwTransferID; /* Host-assigned ID */
+ __le32 dwTransferLength; /* Length of data to xfer */
+ u8 bTransferSegment;
+} __packed;
+
+struct wa_xfer_ctl {
+ struct wa_xfer_hdr hdr;
+ u8 bmAttribute;
+ __le16 wReserved;
+ struct usb_ctrlrequest baSetupData;
+} __packed;
+
+struct wa_xfer_bi {
+ struct wa_xfer_hdr hdr;
+ u8 bReserved;
+ __le16 wReserved;
+} __packed;
+
+/* [WUSB] section 8.5.5 */
+struct wa_xfer_hwaiso {
+ struct wa_xfer_hdr hdr;
+ u8 bReserved;
+ __le16 wPresentationTime;
+ __le32 dwNumOfPackets;
+} __packed;
+
+struct wa_xfer_packet_info_hwaiso {
+ __le16 wLength;
+ u8 bPacketType;
+ u8 bReserved;
+ __le16 PacketLength[0];
+} __packed;
+
+struct wa_xfer_packet_status_len_hwaiso {
+ __le16 PacketLength;
+ __le16 PacketStatus;
+} __packed;
+
+struct wa_xfer_packet_status_hwaiso {
+ __le16 wLength;
+ u8 bPacketType;
+ u8 bReserved;
+ struct wa_xfer_packet_status_len_hwaiso PacketStatus[0];
+} __packed;
+
+/* [WUSB] section 8.3.3.5 */
+struct wa_xfer_abort {
+ u8 bLength;
+ u8 bRequestType;
+ __le16 wRPipe; /* RPipe index */
+ __le32 dwTransferID; /* Host-assigned ID */
+} __packed;
+
+/**
+ * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
+ *
+ */
+struct wa_notif_xfer {
+ struct wa_notif_hdr hdr;
+ u8 bEndpoint;
+ u8 Reserved;
+} __packed;
+
+/** Transfer result basic codes [WUSB] table 8-15 */
+enum {
+ WA_XFER_STATUS_SUCCESS,
+ WA_XFER_STATUS_HALTED,
+ WA_XFER_STATUS_DATA_BUFFER_ERROR,
+ WA_XFER_STATUS_BABBLE,
+ WA_XFER_RESERVED,
+ WA_XFER_STATUS_NOT_FOUND,
+ WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
+ WA_XFER_STATUS_TRANSACTION_ERROR,
+ WA_XFER_STATUS_ABORTED,
+ WA_XFER_STATUS_RPIPE_NOT_READY,
+ WA_XFER_INVALID_FORMAT,
+ WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
+ WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
+};
+
+/** [WUSB] section 8.3.3.4 */
+struct wa_xfer_result {
+ struct wa_notif_hdr hdr;
+ __le32 dwTransferID;
+ __le32 dwTransferLength;
+ u8 bTransferSegment;
+ u8 bTransferStatus;
+ __le32 dwNumOfPackets;
+} __packed;
+
+/**
+ * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
+ *
+ * NOTE: u16 fields are read Little Endian from the hardware.
+ *
+ * @bNumPorts is the original max number of devices that the host can
+ * connect; we might chop this so the stack can handle
+ * it. In case you need to access it, use wusbhc->ports_max
+ * if it is a Wireless USB WA.
+ */
+struct usb_wa_descriptor {
+ u8 bLength;
+ u8 bDescriptorType;
+ __le16 bcdWAVersion;
+ u8 bNumPorts; /* don't use!! */
+ u8 bmAttributes; /* Reserved == 0 */
+ __le16 wNumRPipes;
+ __le16 wRPipeMaxBlock;
+ u8 bRPipeBlockSize;
+ u8 bPwrOn2PwrGood;
+ u8 bNumMMCIEs;
+ u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */
+} __packed;
+
+/**
+ * HWA Device Information Buffer (WUSB1.0[T8.54])
+ */
+struct hwa_dev_info {
+ u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */
+ u8 bDeviceAddress;
+ __le16 wPHYRates;
+ u8 bmDeviceAttribute;
+} __packed;
+
+#endif /* #ifndef __LINUX_USB_WUSB_WA_H */
diff --git a/drivers/staging/wusbcore/include/wusb.h b/drivers/staging/wusbcore/include/wusb.h
new file mode 100644
index 000000000000..09771d1da7bc
--- /dev/null
+++ b/drivers/staging/wusbcore/include/wusb.h
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Wireless USB Standard Definitions
+ * Event Size Tables
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ */
+
+#ifndef __WUSB_H__
+#define __WUSB_H__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/usb/ch9.h>
+#include <linux/param.h>
+#include "../../uwb/include/spec.h"
+
+/**
+ * WUSB Information Element header
+ *
+ * I don't know why, they decided to make it different to the MBOA MAC
+ * IE Header; beats me.
+ */
+struct wuie_hdr {
+ u8 bLength;
+ u8 bIEIdentifier;
+} __attribute__((packed));
+
+enum {
+ WUIE_ID_WCTA = 0x80,
+ WUIE_ID_CONNECTACK,
+ WUIE_ID_HOST_INFO,
+ WUIE_ID_CHANGE_ANNOUNCE,
+ WUIE_ID_DEVICE_DISCONNECT,
+ WUIE_ID_HOST_DISCONNECT,
+ WUIE_ID_KEEP_ALIVE = 0x89,
+ WUIE_ID_ISOCH_DISCARD,
+ WUIE_ID_RESET_DEVICE,
+};
+
+/**
+ * Maximum number of array elements in a WUSB IE.
+ *
+ * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that
+ * are "arrays" have to limited to 4 elements. So we define it
+ * like that to ease up and submit only the neeed size.
+ */
+#define WUIE_ELT_MAX 4
+
+/**
+ * Wrapper for the data that defines a CHID, a CDID or a CK
+ *
+ * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
+ * data. In order to avoid confusion and enforce types, we wrap it.
+ *
+ * Make it packed, as we use it in some hw definitions.
+ */
+struct wusb_ckhdid {
+ u8 data[16];
+} __attribute__((packed));
+
+static const struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } };
+
+#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1)
+
+/**
+ * WUSB IE: Host Information (WUSB1.0[7.5.2])
+ *
+ * Used to provide information about the host to the Wireless USB
+ * devices in range (CHID can be used as an ASCII string).
+ */
+struct wuie_host_info {
+ struct wuie_hdr hdr;
+ __le16 attributes;
+ struct wusb_ckhdid CHID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Connect Ack (WUSB1.0[7.5.1])
+ *
+ * Used to acknowledge device connect requests. See note for
+ * WUIE_ELT_MAX.
+ */
+struct wuie_connect_ack {
+ struct wuie_hdr hdr;
+ struct {
+ struct wusb_ckhdid CDID;
+ u8 bDeviceAddress; /* 0 means unused */
+ u8 bReserved;
+ } blk[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE Host Information Element, Connect Availability
+ *
+ * WUSB1.0[7.5.2], bmAttributes description
+ */
+enum {
+ WUIE_HI_CAP_RECONNECT = 0,
+ WUIE_HI_CAP_LIMITED,
+ WUIE_HI_CAP_RESERVED,
+ WUIE_HI_CAP_ALL,
+};
+
+/**
+ * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
+ *
+ * Tells devices the host is going to stop sending MMCs and will disappear.
+ */
+struct wuie_channel_stop {
+ struct wuie_hdr hdr;
+ u8 attributes;
+ u8 timestamp[3];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Keepalive (WUSB1.0[7.5.9])
+ *
+ * Ask device(s) to send keepalives.
+ */
+struct wuie_keep_alive {
+ struct wuie_hdr hdr;
+ u8 bDeviceAddress[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Reset device (WUSB1.0[7.5.11])
+ *
+ * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only
+ * use it for one at the time...
+ *
+ * In any case, this request is a wee bit silly: why don't they target
+ * by address??
+ */
+struct wuie_reset {
+ struct wuie_hdr hdr;
+ struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Disconnect device (WUSB1.0[7.5.11])
+ *
+ * Tell device to disconnect; we can fit 4 addresses, but we only use
+ * it for one at the time...
+ */
+struct wuie_disconnect {
+ struct wuie_hdr hdr;
+ u8 bDeviceAddress;
+ u8 padding;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Host disconnect ([WUSB] section 7.5.5)
+ *
+ * Tells all connected devices to disconnect.
+ */
+struct wuie_host_disconnect {
+ struct wuie_hdr hdr;
+} __attribute__((packed));
+
+/**
+ * WUSB Device Notification header (WUSB1.0[7.6])
+ */
+struct wusb_dn_hdr {
+ u8 bType;
+ u8 notifdata[];
+} __attribute__((packed));
+
+/** Device Notification codes (WUSB1.0[Table 7-54]) */
+enum WUSB_DN {
+ WUSB_DN_CONNECT = 0x01,
+ WUSB_DN_DISCONNECT = 0x02,
+ WUSB_DN_EPRDY = 0x03,
+ WUSB_DN_MASAVAILCHANGED = 0x04,
+ WUSB_DN_RWAKE = 0x05,
+ WUSB_DN_SLEEP = 0x06,
+ WUSB_DN_ALIVE = 0x07,
+};
+
+/** WUSB Device Notification Connect */
+struct wusb_dn_connect {
+ struct wusb_dn_hdr hdr;
+ __le16 attributes;
+ struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn)
+{
+ return le16_to_cpu(dn->attributes) & 0xff;
+}
+
+static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn)
+{
+ return (le16_to_cpu(dn->attributes) >> 8) & 0x1;
+}
+
+static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn)
+{
+ return (le16_to_cpu(dn->attributes) >> 9) & 0x03;
+}
+
+/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */
+struct wusb_dn_alive {
+ struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/** Device is disconnecting (WUSB1.0[7.6.2]) */
+struct wusb_dn_disconnect {
+ struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/* General constants */
+enum {
+ WUSB_TRUST_TIMEOUT_MS = 4000, /* [WUSB] section 4.15.1 */
+};
+
+/*
+ * WUSB Crypto stuff (WUSB1.0[6])
+ */
+
+extern const char *wusb_et_name(u8);
+
+/**
+ * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for
+ * the host or the device.
+ */
+static inline u8 wusb_key_index(int index, int type, int originator)
+{
+ return (originator << 6) | (type << 4) | index;
+}
+
+#define WUSB_KEY_INDEX_TYPE_PTK 0 /* for HWA only */
+#define WUSB_KEY_INDEX_TYPE_ASSOC 1
+#define WUSB_KEY_INDEX_TYPE_GTK 2
+#define WUSB_KEY_INDEX_ORIGINATOR_HOST 0
+#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1
+/* bits 0-3 used for the key index. */
+#define WUSB_KEY_INDEX_MAX 15
+
+/* A CCM Nonce, defined in WUSB1.0[6.4.1] */
+struct aes_ccm_nonce {
+ u8 sfn[6]; /* Little Endian */
+ u8 tkid[3]; /* LE */
+ struct uwb_dev_addr dest_addr;
+ struct uwb_dev_addr src_addr;
+} __attribute__((packed));
+
+/* A CCM operation label, defined on WUSB1.0[6.5.x] */
+struct aes_ccm_label {
+ u8 data[14];
+} __attribute__((packed));
+
+/*
+ * Input to the key derivation sequence defined in
+ * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the
+ * PRF function.
+ */
+struct wusb_keydvt_in {
+ u8 hnonce[16];
+ u8 dnonce[16];
+} __attribute__((packed));
+
+/*
+ * Output from the key derivation sequence defined in
+ * WUSB1.0[6.5.1].
+ */
+struct wusb_keydvt_out {
+ u8 kck[16];
+ u8 ptk[16];
+} __attribute__((packed));
+
+/* Pseudo Random Function WUSB1.0[6.5] */
+extern int wusb_crypto_init(void);
+extern void wusb_crypto_exit(void);
+extern ssize_t wusb_prf(void *out, size_t out_size,
+ const u8 key[16], const struct aes_ccm_nonce *_n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen, size_t len);
+
+static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 64);
+}
+
+static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 128);
+}
+
+static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 256);
+}
+
+/* Key derivation WUSB1.0[6.5.1] */
+static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out,
+ const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct wusb_keydvt_in *keydvt_in)
+{
+ const struct aes_ccm_label a = { .data = "Pair-wise keys" };
+ return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a,
+ keydvt_in, sizeof(*keydvt_in));
+}
+
+/*
+ * Out-of-band MIC Generation WUSB1.0[6.5.2]
+ *
+ * Compute the MIC over @key, @n and @hs and place it in @mic_out.
+ *
+ * @mic_out: Where to place the 8 byte MIC tag
+ * @key: KCK from the derivation process
+ * @n: CCM nonce, n->sfn == 0, TKID as established in the
+ * process.
+ * @hs: Handshake struct for phase 2 of the 4-way.
+ * hs->bStatus and hs->bReserved are zero.
+ * hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2]
+ * hs->dest_addr is the device's USB address padded with 0
+ * hs->src_addr is the hosts's UWB device address
+ * hs->mic is ignored (as we compute that value).
+ */
+static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct usb_handshake *hs)
+{
+ const struct aes_ccm_label a = { .data = "out-of-bandMIC" };
+ return wusb_prf_64(mic_out, 8, key, n, &a,
+ hs, sizeof(*hs) - sizeof(hs->MIC));
+}
+
+#endif /* #ifndef __WUSB_H__ */
diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/staging/wusbcore/mmc.c
index acce0d551eb2..881e1f20d718 100644
--- a/drivers/usb/wusbcore/mmc.c
+++ b/drivers/staging/wusbcore/mmc.c
@@ -22,9 +22,9 @@
* FIXME:
* - add timers that autoremove intervalled IEs?
*/
-#include <linux/usb/wusb.h>
#include <linux/slab.h>
#include <linux/export.h>
+#include "include/wusb.h"
#include "wusbhc.h"
/* Initialize the MMCIEs handling mechanism */
diff --git a/drivers/usb/wusbcore/pal.c b/drivers/staging/wusbcore/pal.c
index 30f569131471..30f569131471 100644
--- a/drivers/usb/wusbcore/pal.c
+++ b/drivers/staging/wusbcore/pal.c
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/staging/wusbcore/reservation.c
index 6dcfc6825f55..b921faac698b 100644
--- a/drivers/usb/wusbcore/reservation.c
+++ b/drivers/staging/wusbcore/reservation.c
@@ -5,8 +5,8 @@
* Copyright (C) 2007 Cambridge Silicon Radio Ltd.
*/
#include <linux/kernel.h>
-#include <linux/uwb.h>
+#include "../uwb/uwb.h"
#include "wusbhc.h"
/*
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/staging/wusbcore/rh.c
index 20c08cd9dcbf..20c08cd9dcbf 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/staging/wusbcore/rh.c
diff --git a/drivers/usb/wusbcore/security.c b/drivers/staging/wusbcore/security.c
index 14ac8c98ac9e..14ac8c98ac9e 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/staging/wusbcore/security.c
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/staging/wusbcore/wa-hc.c
index 6827075fb8a1..6827075fb8a1 100644
--- a/drivers/usb/wusbcore/wa-hc.c
+++ b/drivers/staging/wusbcore/wa-hc.c
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/staging/wusbcore/wa-hc.h
index ec90fff21deb..5a38465724c2 100644
--- a/drivers/usb/wusbcore/wa-hc.h
+++ b/drivers/staging/wusbcore/wa-hc.h
@@ -70,9 +70,9 @@
#include <linux/usb.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
-#include <linux/uwb.h>
-#include <linux/usb/wusb.h>
-#include <linux/usb/wusb-wa.h>
+#include "../uwb/uwb.h"
+#include "include/wusb.h"
+#include "include/wusb-wa.h"
struct wusbhc;
struct wahc;
diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/staging/wusbcore/wa-nep.c
index 5f0656db5482..5f0656db5482 100644
--- a/drivers/usb/wusbcore/wa-nep.c
+++ b/drivers/staging/wusbcore/wa-nep.c
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/staging/wusbcore/wa-rpipe.c
index a5734cbcd5ad..a5734cbcd5ad 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/staging/wusbcore/wa-rpipe.c
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/staging/wusbcore/wa-xfer.c
index abf88cea37bb..abf88cea37bb 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/staging/wusbcore/wa-xfer.c
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/staging/wusbcore/wusbhc.c
index d0b404d258e8..d0b404d258e8 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/staging/wusbcore/wusbhc.c
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/staging/wusbcore/wusbhc.h
index 7681d796ca5b..716244a2ec44 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/staging/wusbcore/wusbhc.h
@@ -45,8 +45,8 @@
#include <linux/kref.h>
#include <linux/workqueue.h>
#include <linux/usb/hcd.h>
-#include <linux/uwb.h>
-#include <linux/usb/wusb.h>
+#include "../uwb/uwb.h"
+#include "include/wusb.h"
/*
* Time from a WUSB channel stop request to the last transmitted MMC.
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 6e59d370ef81..275568abc670 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -36,8 +36,7 @@ menuconfig USB_SUPPORT
if USB_SUPPORT
-config USB_COMMON
- tristate
+source "drivers/usb/common/Kconfig"
config USB_ARCH_HAS_HCD
def_bool y
@@ -98,8 +97,6 @@ source "drivers/usb/core/Kconfig"
source "drivers/usb/mon/Kconfig"
-source "drivers/usb/wusbcore/Kconfig"
-
source "drivers/usb/host/Kconfig"
source "drivers/usb/renesas_usbhs/Kconfig"
@@ -114,6 +111,8 @@ source "drivers/usb/usbip/Kconfig"
endif
+source "drivers/usb/cdns3/Kconfig"
+
source "drivers/usb/mtu3/Kconfig"
source "drivers/usb/musb/Kconfig"
@@ -175,36 +174,4 @@ source "drivers/usb/typec/Kconfig"
source "drivers/usb/roles/Kconfig"
-config USB_LED_TRIG
- bool "USB LED Triggers"
- depends on LEDS_CLASS && LEDS_TRIGGERS
- select USB_COMMON
- help
- This option adds LED triggers for USB host and/or gadget activity.
-
- Say Y here if you are working on a system with led-class supported
- LEDs and you want to use them as activity indicators for USB host or
- gadget.
-
-config USB_ULPI_BUS
- tristate "USB ULPI PHY interface support"
- select USB_COMMON
- help
- UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
- USB 2.0 PHY interface. The ULPI specification defines a standard set
- of registers that can be used to detect the vendor and product which
- allows ULPI to be handled as a bus. This module is the driver for that
- bus.
-
- The ULPI interfaces (the buses) are registered by the drivers for USB
- controllers which support ULPI register access and have ULPI PHY
- attached to them. The ULPI PHY drivers themselves are normal PHY
- drivers.
-
- ULPI PHYs provide often functions such as ADP sensing/probing (OTG
- protocol) and USB charger detection.
-
- To compile this driver as a module, choose M here: the module will
- be called ulpi.
-
endif # USB_SUPPORT
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index ecc2de1ffaae..1c1c1d659394 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -13,6 +13,8 @@ obj-$(CONFIG_USB_DWC3) += dwc3/
obj-$(CONFIG_USB_DWC2) += dwc2/
obj-$(CONFIG_USB_ISP1760) += isp1760/
+obj-$(CONFIG_USB_CDNS3) += cdns3/
+
obj-$(CONFIG_USB_MON) += mon/
obj-$(CONFIG_USB_MTU3) += mtu3/
@@ -35,8 +37,6 @@ obj-$(CONFIG_USB_MAX3421_HCD) += host/
obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
-obj-$(CONFIG_USB_WUSB) += wusbcore/
-
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
obj-$(CONFIG_USB_WDM) += class/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index e57a2be8754a..5d41f85a7445 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -539,6 +539,37 @@ CXACRU_SET_##_action( adsl_config);
CXACRU_ALL_FILES(INIT);
+static struct attribute *cxacru_attrs[] = {
+ &dev_attr_adsl_config.attr,
+ &dev_attr_adsl_state.attr,
+ &dev_attr_adsl_controller_version.attr,
+ &dev_attr_adsl_headend_environment.attr,
+ &dev_attr_adsl_headend.attr,
+ &dev_attr_modulation.attr,
+ &dev_attr_line_startable.attr,
+ &dev_attr_downstream_hec_errors.attr,
+ &dev_attr_upstream_hec_errors.attr,
+ &dev_attr_downstream_fec_errors.attr,
+ &dev_attr_upstream_fec_errors.attr,
+ &dev_attr_downstream_crc_errors.attr,
+ &dev_attr_upstream_crc_errors.attr,
+ &dev_attr_startup_attempts.attr,
+ &dev_attr_downstream_bits_per_frame.attr,
+ &dev_attr_upstream_bits_per_frame.attr,
+ &dev_attr_transmitter_power.attr,
+ &dev_attr_downstream_attenuation.attr,
+ &dev_attr_upstream_attenuation.attr,
+ &dev_attr_downstream_snr_margin.attr,
+ &dev_attr_upstream_snr_margin.attr,
+ &dev_attr_mac_address.attr,
+ &dev_attr_line_status.attr,
+ &dev_attr_link_status.attr,
+ &dev_attr_upstream_rate.attr,
+ &dev_attr_downstream_rate.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(cxacru);
+
/* the following three functions are stolen from drivers/usb/core/message.c */
static void cxacru_blocking_completion(struct urb *urb)
{
@@ -736,17 +767,6 @@ static int cxacru_card_status(struct cxacru_data *instance)
return 0;
}
-static void cxacru_remove_device_files(struct usbatm_data *usbatm_instance,
- struct atm_dev *atm_dev)
-{
- struct usb_interface *intf = usbatm_instance->usb_intf;
-
- #define CXACRU_DEVICE_REMOVE_FILE(_name) \
- device_remove_file(&intf->dev, &dev_attr_##_name);
- CXACRU_ALL_FILES(REMOVE);
- #undef CXACRU_DEVICE_REMOVE_FILE
-}
-
static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
struct atm_dev *atm_dev)
{
@@ -765,13 +785,6 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
return ret;
}
- #define CXACRU_DEVICE_CREATE_FILE(_name) \
- ret = device_create_file(&intf->dev, &dev_attr_##_name); \
- if (unlikely(ret)) \
- goto fail_sysfs;
- CXACRU_ALL_FILES(CREATE);
- #undef CXACRU_DEVICE_CREATE_FILE
-
/* start ADSL */
mutex_lock(&instance->adsl_state_serialize);
ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
@@ -804,11 +817,6 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
if (start_polling)
cxacru_poll_status(&instance->poll_work.work);
return 0;
-
-fail_sysfs:
- usb_err(usbatm_instance, "cxacru_atm_start: device_create_file failed (%d)\n", ret);
- cxacru_remove_device_files(usbatm_instance, atm_dev);
- return ret;
}
static void cxacru_poll_status(struct work_struct *work)
@@ -1332,7 +1340,6 @@ static struct usbatm_driver cxacru_driver = {
.heavy_init = cxacru_heavy_init,
.unbind = cxacru_unbind,
.atm_start = cxacru_atm_start,
- .atm_stop = cxacru_remove_device_files,
.bulk_in = CXACRU_EP_DATA,
.bulk_out = CXACRU_EP_DATA,
.rx_padding = 3,
@@ -1364,7 +1371,8 @@ static struct usb_driver cxacru_usb_driver = {
.name = cxacru_driver_name,
.probe = cxacru_usb_probe,
.disconnect = usbatm_usb_disconnect,
- .id_table = cxacru_usb_ids
+ .id_table = cxacru_usb_ids,
+ .dev_groups = cxacru_groups,
};
module_usb_driver(cxacru_usb_driver);
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 8faa51b1a520..8b0ea8c70d73 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2458,7 +2458,7 @@ static int claim_interface(struct usb_device *usb_dev,
return ret;
}
-static struct attribute *attrs[] = {
+static struct attribute *uea_attrs[] = {
&dev_attr_stat_status.attr,
&dev_attr_stat_mflags.attr,
&dev_attr_stat_human_status.attr,
@@ -2479,9 +2479,7 @@ static struct attribute *attrs[] = {
&dev_attr_stat_firmid.attr,
NULL,
};
-static const struct attribute_group attr_grp = {
- .attrs = attrs,
-};
+ATTRIBUTE_GROUPS(uea);
static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
const struct usb_device_id *id)
@@ -2550,18 +2548,12 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
}
}
- ret = sysfs_create_group(&intf->dev.kobj, &attr_grp);
- if (ret < 0)
- goto error;
-
ret = uea_boot(sc);
if (ret < 0)
- goto error_rm_grp;
+ goto error;
return 0;
-error_rm_grp:
- sysfs_remove_group(&intf->dev.kobj, &attr_grp);
error:
kfree(sc);
return ret;
@@ -2571,7 +2563,6 @@ static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
{
struct uea_softc *sc = usbatm->driver_data;
- sysfs_remove_group(&intf->dev.kobj, &attr_grp);
uea_stop(sc);
kfree(sc);
}
@@ -2721,6 +2712,7 @@ static struct usb_driver uea_driver = {
.id_table = uea_ids,
.probe = uea_probe,
.disconnect = uea_disconnect,
+ .dev_groups = uea_groups,
};
MODULE_DEVICE_TABLE(usb, uea_ids);
diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
new file mode 100644
index 000000000000..d0331613a355
--- /dev/null
+++ b/drivers/usb/cdns3/Kconfig
@@ -0,0 +1,46 @@
+config USB_CDNS3
+ tristate "Cadence USB3 Dual-Role Controller"
+ depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA
+ select USB_XHCI_PLATFORM if USB_XHCI_HCD
+ select USB_ROLE_SWITCH
+ help
+ Say Y here if your system has a Cadence USB3 dual-role controller.
+ It supports: dual-role switch, Host-only, and Peripheral-only.
+
+ If you choose to build this driver is a dynamically linked
+ as module, the module will be called cdns3.ko.
+
+if USB_CDNS3
+
+config USB_CDNS3_GADGET
+ bool "Cadence USB3 device controller"
+ depends on USB_GADGET=y || USB_GADGET=USB_CDNS3
+ help
+ Say Y here to enable device controller functionality of the
+ Cadence USBSS-DEV driver.
+
+ This controller supports FF, HS and SS mode. It doesn't support
+ LS and SSP mode.
+
+config USB_CDNS3_HOST
+ bool "Cadence USB3 host controller"
+ depends on USB=y || USB=USB_CDNS3
+ help
+ Say Y here to enable host controller functionality of the
+ Cadence driver.
+
+ Host controller is compliant with XHCI so it will use
+ standard XHCI driver.
+
+config USB_CDNS3_PCI_WRAP
+ tristate "Cadence USB3 support on PCIe-based platforms"
+ depends on USB_PCI && ACPI
+ default USB_CDNS3
+ help
+ If you're using the USBSS Core IP with a PCIe, please say
+ 'Y' or 'M' here.
+
+ If you choose to build this driver as module it will
+ be dynamically linked and module will be called cdns3-pci.ko
+
+endif
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
new file mode 100644
index 000000000000..a703547350bb
--- /dev/null
+++ b/drivers/usb/cdns3/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+# define_trace.h needs to know how to find our header
+CFLAGS_trace.o := -I$(src)
+
+cdns3-y := core.o drd.o
+
+obj-$(CONFIG_USB_CDNS3) += cdns3.o
+cdns3-$(CONFIG_USB_CDNS3_GADGET) += gadget.o ep0.o
+
+ifneq ($(CONFIG_USB_CDNS3_GADGET),)
+cdns3-$(CONFIG_TRACING) += trace.o
+endif
+
+cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o
+
+obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o
diff --git a/drivers/usb/cdns3/cdns3-pci-wrap.c b/drivers/usb/cdns3/cdns3-pci-wrap.c
new file mode 100644
index 000000000000..c41ddb61b857
--- /dev/null
+++ b/drivers/usb/cdns3/cdns3-pci-wrap.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS PCI Glue driver
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct cdns3_wrap {
+ struct platform_device *plat_dev;
+ struct resource dev_res[6];
+ int devfn;
+};
+
+#define RES_IRQ_HOST_ID 0
+#define RES_IRQ_PERIPHERAL_ID 1
+#define RES_IRQ_OTG_ID 2
+#define RES_HOST_ID 3
+#define RES_DEV_ID 4
+#define RES_DRD_ID 5
+
+#define PCI_BAR_HOST 0
+#define PCI_BAR_DEV 2
+#define PCI_BAR_OTG 0
+
+#define PCI_DEV_FN_HOST_DEVICE 0
+#define PCI_DEV_FN_OTG 1
+
+#define PCI_DRIVER_NAME "cdns3-pci-usbss"
+#define PLAT_DRIVER_NAME "cdns-usb3"
+
+#define CDNS_VENDOR_ID 0x17cd
+#define CDNS_DEVICE_ID 0x0100
+
+static struct pci_dev *cdns3_get_second_fun(struct pci_dev *pdev)
+{
+ struct pci_dev *func;
+
+ /*
+ * Gets the second function.
+ * It's little tricky, but this platform has two function.
+ * The fist keeps resources for Host/Device while the second
+ * keeps resources for DRD/OTG.
+ */
+ func = pci_get_device(pdev->vendor, pdev->device, NULL);
+ if (unlikely(!func))
+ return NULL;
+
+ if (func->devfn == pdev->devfn) {
+ func = pci_get_device(pdev->vendor, pdev->device, func);
+ if (unlikely(!func))
+ return NULL;
+ }
+
+ return func;
+}
+
+static int cdns3_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct platform_device_info plat_info;
+ struct cdns3_wrap *wrap;
+ struct resource *res;
+ struct pci_dev *func;
+ int err;
+
+ /*
+ * for GADGET/HOST PCI (devfn) function number is 0,
+ * for OTG PCI (devfn) function number is 1
+ */
+ if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE &&
+ pdev->devfn != PCI_DEV_FN_OTG))
+ return -EINVAL;
+
+ func = cdns3_get_second_fun(pdev);
+ if (unlikely(!func))
+ return -EINVAL;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", err);
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ if (pci_is_enabled(func)) {
+ wrap = pci_get_drvdata(func);
+ } else {
+ wrap = kzalloc(sizeof(*wrap), GFP_KERNEL);
+ if (!wrap) {
+ pci_disable_device(pdev);
+ return -ENOMEM;
+ }
+ }
+
+ res = wrap->dev_res;
+
+ if (pdev->devfn == PCI_DEV_FN_HOST_DEVICE) {
+ /* function 0: host(BAR_0) + device(BAR_1).*/
+ dev_dbg(&pdev->dev, "Initialize Device resources\n");
+ res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV);
+ res[RES_DEV_ID].end = pci_resource_end(pdev, PCI_BAR_DEV);
+ res[RES_DEV_ID].name = "dev";
+ res[RES_DEV_ID].flags = IORESOURCE_MEM;
+ dev_dbg(&pdev->dev, "USBSS-DEV physical base addr: %pa\n",
+ &res[RES_DEV_ID].start);
+
+ res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST);
+ res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST);
+ res[RES_HOST_ID].name = "xhci";
+ res[RES_HOST_ID].flags = IORESOURCE_MEM;
+ dev_dbg(&pdev->dev, "USBSS-XHCI physical base addr: %pa\n",
+ &res[RES_HOST_ID].start);
+
+ /* Interrupt for XHCI */
+ wrap->dev_res[RES_IRQ_HOST_ID].start = pdev->irq;
+ wrap->dev_res[RES_IRQ_HOST_ID].name = "host";
+ wrap->dev_res[RES_IRQ_HOST_ID].flags = IORESOURCE_IRQ;
+
+ /* Interrupt device. It's the same as for HOST. */
+ wrap->dev_res[RES_IRQ_PERIPHERAL_ID].start = pdev->irq;
+ wrap->dev_res[RES_IRQ_PERIPHERAL_ID].name = "peripheral";
+ wrap->dev_res[RES_IRQ_PERIPHERAL_ID].flags = IORESOURCE_IRQ;
+ } else {
+ res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG);
+ res[RES_DRD_ID].end = pci_resource_end(pdev, PCI_BAR_OTG);
+ res[RES_DRD_ID].name = "otg";
+ res[RES_DRD_ID].flags = IORESOURCE_MEM;
+ dev_dbg(&pdev->dev, "USBSS-DRD physical base addr: %pa\n",
+ &res[RES_DRD_ID].start);
+
+ /* Interrupt for OTG/DRD. */
+ wrap->dev_res[RES_IRQ_OTG_ID].start = pdev->irq;
+ wrap->dev_res[RES_IRQ_OTG_ID].name = "otg";
+ wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ;
+ }
+
+ if (pci_is_enabled(func)) {
+ /* set up platform device info */
+ memset(&plat_info, 0, sizeof(plat_info));
+ plat_info.parent = &pdev->dev;
+ plat_info.fwnode = pdev->dev.fwnode;
+ plat_info.name = PLAT_DRIVER_NAME;
+ plat_info.id = pdev->devfn;
+ wrap->devfn = pdev->devfn;
+ plat_info.res = wrap->dev_res;
+ plat_info.num_res = ARRAY_SIZE(wrap->dev_res);
+ plat_info.dma_mask = pdev->dma_mask;
+ /* register platform device */
+ wrap->plat_dev = platform_device_register_full(&plat_info);
+ if (IS_ERR(wrap->plat_dev)) {
+ pci_disable_device(pdev);
+ kfree(wrap);
+ return PTR_ERR(wrap->plat_dev);
+ }
+ }
+
+ pci_set_drvdata(pdev, wrap);
+ return err;
+}
+
+static void cdns3_pci_remove(struct pci_dev *pdev)
+{
+ struct cdns3_wrap *wrap;
+ struct pci_dev *func;
+
+ func = cdns3_get_second_fun(pdev);
+
+ wrap = (struct cdns3_wrap *)pci_get_drvdata(pdev);
+ if (wrap->devfn == pdev->devfn)
+ platform_device_unregister(wrap->plat_dev);
+
+ if (!pci_is_enabled(func))
+ kfree(wrap);
+}
+
+static const struct pci_device_id cdns3_pci_ids[] = {
+ { PCI_DEVICE(CDNS_VENDOR_ID, CDNS_DEVICE_ID), },
+ { 0, }
+};
+
+static struct pci_driver cdns3_pci_driver = {
+ .name = PCI_DRIVER_NAME,
+ .id_table = cdns3_pci_ids,
+ .probe = cdns3_pci_probe,
+ .remove = cdns3_pci_remove,
+};
+
+module_pci_driver(cdns3_pci_driver);
+MODULE_DEVICE_TABLE(pci, cdns3_pci_ids);
+
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USBSS PCI wrapperr");
diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
new file mode 100644
index 000000000000..06f1e105be4e
--- /dev/null
+++ b/drivers/usb/cdns3/core.c
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ * Copyright (C) 2017-2018 NXP
+ * Copyright (C) 2019 Texas Instruments
+ *
+ * Author: Peter Chen <peter.chen@nxp.com>
+ * Pawel Laszczak <pawell@cadence.com>
+ * Roger Quadros <rogerq@ti.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+
+#include "gadget.h"
+#include "core.h"
+#include "host-export.h"
+#include "gadget-export.h"
+#include "drd.h"
+
+static int cdns3_idle_init(struct cdns3 *cdns);
+
+static inline
+struct cdns3_role_driver *cdns3_get_current_role_driver(struct cdns3 *cdns)
+{
+ WARN_ON(!cdns->roles[cdns->role]);
+ return cdns->roles[cdns->role];
+}
+
+static int cdns3_role_start(struct cdns3 *cdns, enum usb_role role)
+{
+ int ret;
+
+ if (WARN_ON(role > USB_ROLE_DEVICE))
+ return 0;
+
+ mutex_lock(&cdns->mutex);
+ cdns->role = role;
+ mutex_unlock(&cdns->mutex);
+
+ if (!cdns->roles[role])
+ return -ENXIO;
+
+ if (cdns->roles[role]->state == CDNS3_ROLE_STATE_ACTIVE)
+ return 0;
+
+ mutex_lock(&cdns->mutex);
+ ret = cdns->roles[role]->start(cdns);
+ if (!ret)
+ cdns->roles[role]->state = CDNS3_ROLE_STATE_ACTIVE;
+ mutex_unlock(&cdns->mutex);
+
+ return ret;
+}
+
+static void cdns3_role_stop(struct cdns3 *cdns)
+{
+ enum usb_role role = cdns->role;
+
+ if (WARN_ON(role > USB_ROLE_DEVICE))
+ return;
+
+ if (cdns->roles[role]->state == CDNS3_ROLE_STATE_INACTIVE)
+ return;
+
+ mutex_lock(&cdns->mutex);
+ cdns->roles[role]->stop(cdns);
+ cdns->roles[role]->state = CDNS3_ROLE_STATE_INACTIVE;
+ mutex_unlock(&cdns->mutex);
+}
+
+static void cdns3_exit_roles(struct cdns3 *cdns)
+{
+ cdns3_role_stop(cdns);
+ cdns3_drd_exit(cdns);
+}
+
+static enum usb_role cdsn3_hw_role_state_machine(struct cdns3 *cdns);
+
+/**
+ * cdns3_core_init_role - initialize role of operation
+ * @cdns: Pointer to cdns3 structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns3_core_init_role(struct cdns3 *cdns)
+{
+ struct device *dev = cdns->dev;
+ enum usb_dr_mode best_dr_mode;
+ enum usb_dr_mode dr_mode;
+ int ret = 0;
+
+ dr_mode = usb_get_dr_mode(dev);
+ cdns->role = USB_ROLE_NONE;
+
+ /*
+ * If driver can't read mode by means of usb_get_dr_mode function then
+ * chooses mode according with Kernel configuration. This setting
+ * can be restricted later depending on strap pin configuration.
+ */
+ if (dr_mode == USB_DR_MODE_UNKNOWN) {
+ if (IS_ENABLED(CONFIG_USB_CDNS3_HOST) &&
+ IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
+ dr_mode = USB_DR_MODE_OTG;
+ else if (IS_ENABLED(CONFIG_USB_CDNS3_HOST))
+ dr_mode = USB_DR_MODE_HOST;
+ else if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
+ dr_mode = USB_DR_MODE_PERIPHERAL;
+ }
+
+ /*
+ * At this point cdns->dr_mode contains strap configuration.
+ * Driver try update this setting considering kernel configuration
+ */
+ best_dr_mode = cdns->dr_mode;
+
+ ret = cdns3_idle_init(cdns);
+ if (ret)
+ return ret;
+
+ if (dr_mode == USB_DR_MODE_OTG) {
+ best_dr_mode = cdns->dr_mode;
+ } else if (cdns->dr_mode == USB_DR_MODE_OTG) {
+ best_dr_mode = dr_mode;
+ } else if (cdns->dr_mode != dr_mode) {
+ dev_err(dev, "Incorrect DRD configuration\n");
+ return -EINVAL;
+ }
+
+ dr_mode = best_dr_mode;
+
+ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+ ret = cdns3_host_init(cdns);
+ if (ret) {
+ dev_err(dev, "Host initialization failed with %d\n",
+ ret);
+ goto err;
+ }
+ }
+
+ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+ ret = cdns3_gadget_init(cdns);
+ if (ret) {
+ dev_err(dev, "Device initialization failed with %d\n",
+ ret);
+ goto err;
+ }
+ }
+
+ cdns->dr_mode = dr_mode;
+
+ ret = cdns3_drd_update_mode(cdns);
+ if (ret)
+ goto err;
+
+ if (cdns->dr_mode != USB_DR_MODE_OTG) {
+ ret = cdns3_hw_role_switch(cdns);
+ if (ret)
+ goto err;
+ }
+
+ return ret;
+err:
+ cdns3_exit_roles(cdns);
+ return ret;
+}
+
+/**
+ * cdsn3_hw_role_state_machine - role switch state machine based on hw events.
+ * @cdns: Pointer to controller structure.
+ *
+ * Returns next role to be entered based on hw events.
+ */
+static enum usb_role cdsn3_hw_role_state_machine(struct cdns3 *cdns)
+{
+ enum usb_role role;
+ int id, vbus;
+
+ if (cdns->dr_mode != USB_DR_MODE_OTG)
+ goto not_otg;
+
+ id = cdns3_get_id(cdns);
+ vbus = cdns3_get_vbus(cdns);
+
+ /*
+ * Role change state machine
+ * Inputs: ID, VBUS
+ * Previous state: cdns->role
+ * Next state: role
+ */
+ role = cdns->role;
+
+ switch (role) {
+ case USB_ROLE_NONE:
+ /*
+ * Driver treats USB_ROLE_NONE synonymous to IDLE state from
+ * controller specification.
+ */
+ if (!id)
+ role = USB_ROLE_HOST;
+ else if (vbus)
+ role = USB_ROLE_DEVICE;
+ break;
+ case USB_ROLE_HOST: /* from HOST, we can only change to NONE */
+ if (id)
+ role = USB_ROLE_NONE;
+ break;
+ case USB_ROLE_DEVICE: /* from GADGET, we can only change to NONE*/
+ if (!vbus)
+ role = USB_ROLE_NONE;
+ break;
+ }
+
+ dev_dbg(cdns->dev, "role %d -> %d\n", cdns->role, role);
+
+ return role;
+
+not_otg:
+ if (cdns3_is_host(cdns))
+ role = USB_ROLE_HOST;
+ if (cdns3_is_device(cdns))
+ role = USB_ROLE_DEVICE;
+
+ return role;
+}
+
+static int cdns3_idle_role_start(struct cdns3 *cdns)
+{
+ return 0;
+}
+
+static void cdns3_idle_role_stop(struct cdns3 *cdns)
+{
+ /* Program Lane swap and bring PHY out of RESET */
+ phy_reset(cdns->usb3_phy);
+}
+
+static int cdns3_idle_init(struct cdns3 *cdns)
+{
+ struct cdns3_role_driver *rdrv;
+
+ rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+ if (!rdrv)
+ return -ENOMEM;
+
+ rdrv->start = cdns3_idle_role_start;
+ rdrv->stop = cdns3_idle_role_stop;
+ rdrv->state = CDNS3_ROLE_STATE_INACTIVE;
+ rdrv->suspend = NULL;
+ rdrv->resume = NULL;
+ rdrv->name = "idle";
+
+ cdns->roles[USB_ROLE_NONE] = rdrv;
+
+ return 0;
+}
+
+/**
+ * cdns3_hw_role_switch - switch roles based on HW state
+ * @cdns3: controller
+ */
+int cdns3_hw_role_switch(struct cdns3 *cdns)
+{
+ enum usb_role real_role, current_role;
+ int ret = 0;
+
+ /* Do nothing if role based on syfs. */
+ if (cdns->role_override)
+ return 0;
+
+ pm_runtime_get_sync(cdns->dev);
+
+ current_role = cdns->role;
+ real_role = cdsn3_hw_role_state_machine(cdns);
+
+ /* Do nothing if nothing changed */
+ if (current_role == real_role)
+ goto exit;
+
+ cdns3_role_stop(cdns);
+
+ dev_dbg(cdns->dev, "Switching role %d -> %d", current_role, real_role);
+
+ ret = cdns3_role_start(cdns, real_role);
+ if (ret) {
+ /* Back to current role */
+ dev_err(cdns->dev, "set %d has failed, back to %d\n",
+ real_role, current_role);
+ ret = cdns3_role_start(cdns, current_role);
+ if (ret)
+ dev_err(cdns->dev, "back to %d failed too\n",
+ current_role);
+ }
+exit:
+ pm_runtime_put_sync(cdns->dev);
+ return ret;
+}
+
+/**
+ * cdsn3_role_get - get current role of controller.
+ *
+ * @dev: Pointer to device structure
+ *
+ * Returns role
+ */
+static enum usb_role cdns3_role_get(struct device *dev)
+{
+ struct cdns3 *cdns = dev_get_drvdata(dev);
+
+ return cdns->role;
+}
+
+/**
+ * cdns3_role_set - set current role of controller.
+ *
+ * @dev: pointer to device object
+ * @role - the previous role
+ * Handles below events:
+ * - Role switch for dual-role devices
+ * - USB_ROLE_GADGET <--> USB_ROLE_NONE for peripheral-only devices
+ */
+static int cdns3_role_set(struct device *dev, enum usb_role role)
+{
+ struct cdns3 *cdns = dev_get_drvdata(dev);
+ int ret = 0;
+
+ pm_runtime_get_sync(cdns->dev);
+
+ /*
+ * FIXME: switch role framework should be extended to meet
+ * requirements. Driver assumes that role can be controlled
+ * by SW or HW. Temporary workaround is to use USB_ROLE_NONE to
+ * switch from SW to HW control.
+ *
+ * For dr_mode == USB_DR_MODE_OTG:
+ * if user sets USB_ROLE_HOST or USB_ROLE_DEVICE then driver
+ * sets role_override flag and forces that role.
+ * if user sets USB_ROLE_NONE, driver clears role_override and lets
+ * HW state machine take over.
+ *
+ * For dr_mode != USB_DR_MODE_OTG:
+ * Assumptions:
+ * 1. Restricted user control between NONE and dr_mode.
+ * 2. Driver doesn't need to rely on role_override flag.
+ * 3. Driver needs to ensure that HW state machine is never called
+ * if dr_mode != USB_DR_MODE_OTG.
+ */
+ if (role == USB_ROLE_NONE)
+ cdns->role_override = 0;
+ else
+ cdns->role_override = 1;
+
+ /*
+ * HW state might have changed so driver need to trigger
+ * HW state machine if dr_mode == USB_DR_MODE_OTG.
+ */
+ if (!cdns->role_override && cdns->dr_mode == USB_DR_MODE_OTG) {
+ cdns3_hw_role_switch(cdns);
+ goto pm_put;
+ }
+
+ if (cdns->role == role)
+ goto pm_put;
+
+ if (cdns->dr_mode == USB_DR_MODE_HOST) {
+ switch (role) {
+ case USB_ROLE_NONE:
+ case USB_ROLE_HOST:
+ break;
+ default:
+ ret = -EPERM;
+ goto pm_put;
+ }
+ }
+
+ if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL) {
+ switch (role) {
+ case USB_ROLE_NONE:
+ case USB_ROLE_DEVICE:
+ break;
+ default:
+ ret = -EPERM;
+ goto pm_put;
+ }
+ }
+
+ cdns3_role_stop(cdns);
+ ret = cdns3_role_start(cdns, role);
+ if (ret) {
+ dev_err(cdns->dev, "set role %d has failed\n", role);
+ ret = -EPERM;
+ }
+
+pm_put:
+ pm_runtime_put_sync(cdns->dev);
+ return ret;
+}
+
+static const struct usb_role_switch_desc cdns3_switch_desc = {
+ .set = cdns3_role_set,
+ .get = cdns3_role_get,
+ .allow_userspace_control = true,
+};
+
+/**
+ * cdns3_probe - probe for cdns3 core device
+ * @pdev: Pointer to cdns3 core platform device
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct cdns3 *cdns;
+ void __iomem *regs;
+ int ret;
+
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(dev, "error setting dma mask: %d\n", ret);
+ return -ENODEV;
+ }
+
+ cdns = devm_kzalloc(dev, sizeof(*cdns), GFP_KERNEL);
+ if (!cdns)
+ return -ENOMEM;
+
+ cdns->dev = dev;
+
+ platform_set_drvdata(pdev, cdns);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "host");
+ if (!res) {
+ dev_err(dev, "missing host IRQ\n");
+ return -ENODEV;
+ }
+
+ cdns->xhci_res[0] = *res;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "xhci");
+ if (!res) {
+ dev_err(dev, "couldn't get xhci resource\n");
+ return -ENXIO;
+ }
+
+ cdns->xhci_res[1] = *res;
+
+ cdns->dev_irq = platform_get_irq_byname(pdev, "peripheral");
+ if (cdns->dev_irq == -EPROBE_DEFER)
+ return cdns->dev_irq;
+
+ if (cdns->dev_irq < 0)
+ dev_err(dev, "couldn't get peripheral irq\n");
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dev");
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+ cdns->dev_regs = regs;
+
+ cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
+ if (cdns->otg_irq == -EPROBE_DEFER)
+ return cdns->otg_irq;
+
+ if (cdns->otg_irq < 0) {
+ dev_err(dev, "couldn't get otg irq\n");
+ return cdns->otg_irq;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otg");
+ if (!res) {
+ dev_err(dev, "couldn't get otg resource\n");
+ return -ENXIO;
+ }
+
+ cdns->otg_res = *res;
+
+ mutex_init(&cdns->mutex);
+
+ cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
+ if (IS_ERR(cdns->usb2_phy))
+ return PTR_ERR(cdns->usb2_phy);
+
+ ret = phy_init(cdns->usb2_phy);
+ if (ret)
+ return ret;
+
+ cdns->usb3_phy = devm_phy_optional_get(dev, "cdns3,usb3-phy");
+ if (IS_ERR(cdns->usb3_phy))
+ return PTR_ERR(cdns->usb3_phy);
+
+ ret = phy_init(cdns->usb3_phy);
+ if (ret)
+ goto err1;
+
+ ret = phy_power_on(cdns->usb2_phy);
+ if (ret)
+ goto err2;
+
+ ret = phy_power_on(cdns->usb3_phy);
+ if (ret)
+ goto err3;
+
+ cdns->role_sw = usb_role_switch_register(dev, &cdns3_switch_desc);
+ if (IS_ERR(cdns->role_sw)) {
+ ret = PTR_ERR(cdns->role_sw);
+ dev_warn(dev, "Unable to register Role Switch\n");
+ goto err4;
+ }
+
+ ret = cdns3_drd_init(cdns);
+ if (ret)
+ goto err5;
+
+ ret = cdns3_core_init_role(cdns);
+ if (ret)
+ goto err5;
+
+ device_set_wakeup_capable(dev, true);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ /*
+ * The controller needs less time between bus and controller suspend,
+ * and we also needs a small delay to avoid frequently entering low
+ * power mode.
+ */
+ pm_runtime_set_autosuspend_delay(dev, 20);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_use_autosuspend(dev);
+ dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
+
+ return 0;
+err5:
+ cdns3_drd_exit(cdns);
+ usb_role_switch_unregister(cdns->role_sw);
+err4:
+ phy_power_off(cdns->usb3_phy);
+
+err3:
+ phy_power_off(cdns->usb2_phy);
+err2:
+ phy_exit(cdns->usb3_phy);
+err1:
+ phy_exit(cdns->usb2_phy);
+
+ return ret;
+}
+
+/**
+ * cdns3_remove - unbind drd driver and clean up
+ * @pdev: Pointer to Linux platform device
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns3_remove(struct platform_device *pdev)
+{
+ struct cdns3 *cdns = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+ cdns3_exit_roles(cdns);
+ usb_role_switch_unregister(cdns->role_sw);
+ phy_power_off(cdns->usb2_phy);
+ phy_power_off(cdns->usb3_phy);
+ phy_exit(cdns->usb2_phy);
+ phy_exit(cdns->usb3_phy);
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int cdns3_suspend(struct device *dev)
+{
+ struct cdns3 *cdns = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (cdns->role == USB_ROLE_HOST)
+ return 0;
+
+ if (pm_runtime_status_suspended(dev))
+ pm_runtime_resume(dev);
+
+ if (cdns->roles[cdns->role]->suspend) {
+ spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
+ cdns->roles[cdns->role]->suspend(cdns, false);
+ spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
+ }
+
+ return 0;
+}
+
+static int cdns3_resume(struct device *dev)
+{
+ struct cdns3 *cdns = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (cdns->role == USB_ROLE_HOST)
+ return 0;
+
+ if (cdns->roles[cdns->role]->resume) {
+ spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
+ cdns->roles[cdns->role]->resume(cdns, false);
+ spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
+ }
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops cdns3_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_cdns3_match[] = {
+ { .compatible = "cdns,usb3" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_cdns3_match);
+#endif
+
+static struct platform_driver cdns3_driver = {
+ .probe = cdns3_probe,
+ .remove = cdns3_remove,
+ .driver = {
+ .name = "cdns-usb3",
+ .of_match_table = of_match_ptr(of_cdns3_match),
+ .pm = &cdns3_pm_ops,
+ },
+};
+
+module_platform_driver(cdns3_driver);
+
+MODULE_ALIAS("platform:cdns3");
+MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence USB3 DRD Controller Driver");
diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
new file mode 100644
index 000000000000..969eb94de204
--- /dev/null
+++ b/drivers/usb/cdns3/core.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS DRD Header File.
+ *
+ * Copyright (C) 2017-2018 NXP
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ * Pawel Laszczak <pawell@cadence.com>
+ */
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+
+#ifndef __LINUX_CDNS3_CORE_H
+#define __LINUX_CDNS3_CORE_H
+
+struct cdns3;
+
+/**
+ * struct cdns3_role_driver - host/gadget role driver
+ * @start: start this role
+ * @stop: stop this role
+ * @suspend: suspend callback for this role
+ * @resume: resume callback for this role
+ * @irq: irq handler for this role
+ * @name: role name string (host/gadget)
+ * @state: current state
+ */
+struct cdns3_role_driver {
+ int (*start)(struct cdns3 *cdns);
+ void (*stop)(struct cdns3 *cdns);
+ int (*suspend)(struct cdns3 *cdns, bool do_wakeup);
+ int (*resume)(struct cdns3 *cdns, bool hibernated);
+ const char *name;
+#define CDNS3_ROLE_STATE_INACTIVE 0
+#define CDNS3_ROLE_STATE_ACTIVE 1
+ int state;
+};
+
+#define CDNS3_XHCI_RESOURCES_NUM 2
+/**
+ * struct cdns3 - Representation of Cadence USB3 DRD controller.
+ * @dev: pointer to Cadence device struct
+ * @xhci_regs: pointer to base of xhci registers
+ * @xhci_res: the resource for xhci
+ * @dev_regs: pointer to base of dev registers
+ * @otg_res: the resource for otg
+ * @otg_v0_regs: pointer to base of v0 otg registers
+ * @otg_v1_regs: pointer to base of v1 otg registers
+ * @otg_regs: pointer to base of otg registers
+ * @otg_irq: irq number for otg controller
+ * @dev_irq: irq number for device controller
+ * @roles: array of supported roles for this controller
+ * @role: current role
+ * @host_dev: the child host device pointer for cdns3 core
+ * @gadget_dev: the child gadget device pointer for cdns3 core
+ * @usb2_phy: pointer to USB2 PHY
+ * @usb3_phy: pointer to USB3 PHY
+ * @mutex: the mutex for concurrent code at driver
+ * @dr_mode: supported mode of operation it can be only Host, only Device
+ * or OTG mode that allow to switch between Device and Host mode.
+ * This field based on firmware setting, kernel configuration
+ * and hardware configuration.
+ * @role_sw: pointer to role switch object.
+ * @role_override: set 1 if role rely on SW.
+ */
+struct cdns3 {
+ struct device *dev;
+ void __iomem *xhci_regs;
+ struct resource xhci_res[CDNS3_XHCI_RESOURCES_NUM];
+ struct cdns3_usb_regs __iomem *dev_regs;
+
+ struct resource otg_res;
+ struct cdns3_otg_legacy_regs *otg_v0_regs;
+ struct cdns3_otg_regs *otg_v1_regs;
+ struct cdns3_otg_common_regs *otg_regs;
+#define CDNS3_CONTROLLER_V0 0
+#define CDNS3_CONTROLLER_V1 1
+ u32 version;
+
+ int otg_irq;
+ int dev_irq;
+ struct cdns3_role_driver *roles[USB_ROLE_DEVICE + 1];
+ enum usb_role role;
+ struct platform_device *host_dev;
+ struct cdns3_device *gadget_dev;
+ struct phy *usb2_phy;
+ struct phy *usb3_phy;
+ /* mutext used in workqueue*/
+ struct mutex mutex;
+ enum usb_dr_mode dr_mode;
+ struct usb_role_switch *role_sw;
+ int role_override;
+};
+
+int cdns3_hw_role_switch(struct cdns3 *cdns);
+
+#endif /* __LINUX_CDNS3_CORE_H */
diff --git a/drivers/usb/cdns3/debug.h b/drivers/usb/cdns3/debug.h
new file mode 100644
index 000000000000..2c9afbfe988b
--- /dev/null
+++ b/drivers/usb/cdns3/debug.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS DRD Driver.
+ * Debug header file.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+#ifndef __LINUX_CDNS3_DEBUG
+#define __LINUX_CDNS3_DEBUG
+
+#include "core.h"
+
+static inline char *cdns3_decode_usb_irq(char *str,
+ enum usb_device_speed speed,
+ u32 usb_ists)
+{
+ int ret;
+
+ ret = sprintf(str, "IRQ %08x = ", usb_ists);
+
+ if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
+ ret += sprintf(str + ret, "Connection %s\n",
+ usb_speed_string(speed));
+ }
+ if (usb_ists & USB_ISTS_DIS2I || usb_ists & USB_ISTS_DISI)
+ ret += sprintf(str + ret, "Disconnection ");
+ if (usb_ists & USB_ISTS_L2ENTI)
+ ret += sprintf(str + ret, "suspended ");
+ if (usb_ists & USB_ISTS_L1ENTI)
+ ret += sprintf(str + ret, "L1 enter ");
+ if (usb_ists & USB_ISTS_L1EXTI)
+ ret += sprintf(str + ret, "L1 exit ");
+ if (usb_ists & USB_ISTS_L2ENTI)
+ ret += sprintf(str + ret, "L2 enter ");
+ if (usb_ists & USB_ISTS_L2EXTI)
+ ret += sprintf(str + ret, "L2 exit ");
+ if (usb_ists & USB_ISTS_U3EXTI)
+ ret += sprintf(str + ret, "U3 exit ");
+ if (usb_ists & USB_ISTS_UWRESI)
+ ret += sprintf(str + ret, "Warm Reset ");
+ if (usb_ists & USB_ISTS_UHRESI)
+ ret += sprintf(str + ret, "Hot Reset ");
+ if (usb_ists & USB_ISTS_U2RESI)
+ ret += sprintf(str + ret, "Reset");
+
+ return str;
+}
+
+static inline char *cdns3_decode_ep_irq(char *str,
+ u32 ep_sts,
+ const char *ep_name)
+{
+ int ret;
+
+ ret = sprintf(str, "IRQ for %s: %08x ", ep_name, ep_sts);
+
+ if (ep_sts & EP_STS_SETUP)
+ ret += sprintf(str + ret, "SETUP ");
+ if (ep_sts & EP_STS_IOC)
+ ret += sprintf(str + ret, "IOC ");
+ if (ep_sts & EP_STS_ISP)
+ ret += sprintf(str + ret, "ISP ");
+ if (ep_sts & EP_STS_DESCMIS)
+ ret += sprintf(str + ret, "DESCMIS ");
+ if (ep_sts & EP_STS_STREAMR)
+ ret += sprintf(str + ret, "STREAMR ");
+ if (ep_sts & EP_STS_MD_EXIT)
+ ret += sprintf(str + ret, "MD_EXIT ");
+ if (ep_sts & EP_STS_TRBERR)
+ ret += sprintf(str + ret, "TRBERR ");
+ if (ep_sts & EP_STS_NRDY)
+ ret += sprintf(str + ret, "NRDY ");
+ if (ep_sts & EP_STS_PRIME)
+ ret += sprintf(str + ret, "PRIME ");
+ if (ep_sts & EP_STS_SIDERR)
+ ret += sprintf(str + ret, "SIDERRT ");
+ if (ep_sts & EP_STS_OUTSMM)
+ ret += sprintf(str + ret, "OUTSMM ");
+ if (ep_sts & EP_STS_ISOERR)
+ ret += sprintf(str + ret, "ISOERR ");
+ if (ep_sts & EP_STS_IOT)
+ ret += sprintf(str + ret, "IOT ");
+
+ return str;
+}
+
+static inline char *cdns3_decode_epx_irq(char *str,
+ char *ep_name,
+ u32 ep_sts)
+{
+ return cdns3_decode_ep_irq(str, ep_sts, ep_name);
+}
+
+static inline char *cdns3_decode_ep0_irq(char *str,
+ int dir,
+ u32 ep_sts)
+{
+ return cdns3_decode_ep_irq(str, ep_sts,
+ dir ? "ep0IN" : "ep0OUT");
+}
+
+/**
+ * Debug a transfer ring.
+ *
+ * Prints out all TRBs in the endpoint ring, even those after the Link TRB.
+ *.
+ */
+static inline char *cdns3_dbg_ring(struct cdns3_endpoint *priv_ep,
+ struct cdns3_trb *ring, char *str)
+{
+ dma_addr_t addr = priv_ep->trb_pool_dma;
+ struct cdns3_trb *trb;
+ int trb_per_sector;
+ int ret = 0;
+ int i;
+
+ trb_per_sector = GET_TRBS_PER_SEGMENT(priv_ep->type);
+
+ trb = &priv_ep->trb_pool[priv_ep->dequeue];
+ ret += sprintf(str + ret, "\n\t\tRing contents for %s:", priv_ep->name);
+
+ ret += sprintf(str + ret,
+ "\n\t\tRing deq index: %d, trb: %p (virt), 0x%llx (dma)\n",
+ priv_ep->dequeue, trb,
+ (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb));
+
+ trb = &priv_ep->trb_pool[priv_ep->enqueue];
+ ret += sprintf(str + ret,
+ "\t\tRing enq index: %d, trb: %p (virt), 0x%llx (dma)\n",
+ priv_ep->enqueue, trb,
+ (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb));
+
+ ret += sprintf(str + ret,
+ "\t\tfree trbs: %d, CCS=%d, PCS=%d\n",
+ priv_ep->free_trbs, priv_ep->ccs, priv_ep->pcs);
+
+ if (trb_per_sector > TRBS_PER_SEGMENT)
+ trb_per_sector = TRBS_PER_SEGMENT;
+
+ if (trb_per_sector > TRBS_PER_SEGMENT) {
+ sprintf(str + ret, "\t\tTo big transfer ring %d\n",
+ trb_per_sector);
+ return str;
+ }
+
+ for (i = 0; i < trb_per_sector; ++i) {
+ trb = &ring[i];
+ ret += sprintf(str + ret,
+ "\t\t@%pad %08x %08x %08x\n", &addr,
+ le32_to_cpu(trb->buffer),
+ le32_to_cpu(trb->length),
+ le32_to_cpu(trb->control));
+ addr += sizeof(*trb);
+ }
+
+ return str;
+}
+
+#endif /*__LINUX_CDNS3_DEBUG*/
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
new file mode 100644
index 000000000000..16ad485f0b69
--- /dev/null
+++ b/drivers/usb/cdns3/drd.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ * Copyright (C) 2019 Texas Instruments
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ * Roger Quadros <rogerq@ti.com>
+ *
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/usb/otg.h>
+
+#include "gadget.h"
+#include "drd.h"
+#include "core.h"
+
+/**
+ * cdns3_set_mode - change mode of OTG Core
+ * @cdns: pointer to context structure
+ * @mode: selected mode from cdns_role
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode)
+{
+ int ret = 0;
+ u32 reg;
+
+ switch (mode) {
+ case USB_DR_MODE_PERIPHERAL:
+ break;
+ case USB_DR_MODE_HOST:
+ break;
+ case USB_DR_MODE_OTG:
+ dev_dbg(cdns->dev, "Set controller to OTG mode\n");
+ if (cdns->version == CDNS3_CONTROLLER_V1) {
+ reg = readl(&cdns->otg_v1_regs->override);
+ reg |= OVERRIDE_IDPULLUP;
+ writel(reg, &cdns->otg_v1_regs->override);
+ } else {
+ reg = readl(&cdns->otg_v0_regs->ctrl1);
+ reg |= OVERRIDE_IDPULLUP_V0;
+ writel(reg, &cdns->otg_v0_regs->ctrl1);
+ }
+
+ /*
+ * Hardware specification says: "ID_VALUE must be valid within
+ * 50ms after idpullup is set to '1" so driver must wait
+ * 50ms before reading this pin.
+ */
+ usleep_range(50000, 60000);
+ break;
+ default:
+ dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+int cdns3_get_id(struct cdns3 *cdns)
+{
+ int id;
+
+ id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE;
+ dev_dbg(cdns->dev, "OTG ID: %d", id);
+
+ return id;
+}
+
+int cdns3_get_vbus(struct cdns3 *cdns)
+{
+ int vbus;
+
+ vbus = !!(readl(&cdns->otg_regs->sts) & OTGSTS_VBUS_VALID);
+ dev_dbg(cdns->dev, "OTG VBUS: %d", vbus);
+
+ return vbus;
+}
+
+int cdns3_is_host(struct cdns3 *cdns)
+{
+ if (cdns->dr_mode == USB_DR_MODE_HOST)
+ return 1;
+ else if (!cdns3_get_id(cdns))
+ return 1;
+
+ return 0;
+}
+
+int cdns3_is_device(struct cdns3 *cdns)
+{
+ if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL)
+ return 1;
+ else if (cdns->dr_mode == USB_DR_MODE_OTG)
+ if (cdns3_get_id(cdns))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * cdns3_otg_disable_irq - Disable all OTG interrupts
+ * @cdns: Pointer to controller context structure
+ */
+static void cdns3_otg_disable_irq(struct cdns3 *cdns)
+{
+ writel(0, &cdns->otg_regs->ien);
+}
+
+/**
+ * cdns3_otg_enable_irq - enable id and sess_valid interrupts
+ * @cdns: Pointer to controller context structure
+ */
+static void cdns3_otg_enable_irq(struct cdns3 *cdns)
+{
+ writel(OTGIEN_ID_CHANGE_INT | OTGIEN_VBUSVALID_RISE_INT |
+ OTGIEN_VBUSVALID_FALL_INT, &cdns->otg_regs->ien);
+}
+
+/**
+ * cdns3_drd_switch_host - start/stop host
+ * @cdns: Pointer to controller context structure
+ * @on: 1 for start, 0 for stop
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns3_drd_switch_host(struct cdns3 *cdns, int on)
+{
+ int ret, val;
+ u32 reg = OTGCMD_OTG_DIS;
+
+ /* switch OTG core */
+ if (on) {
+ writel(OTGCMD_HOST_BUS_REQ | reg, &cdns->otg_regs->cmd);
+
+ dev_dbg(cdns->dev, "Waiting till Host mode is turned on\n");
+ ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+ val & OTGSTS_XHCI_READY,
+ 1, 100000);
+ if (ret) {
+ dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
+ return ret;
+ }
+ } else {
+ writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+ OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+ &cdns->otg_regs->cmd);
+ /* Waiting till H_IDLE state.*/
+ readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+ !(val & OTGSTATE_HOST_STATE_MASK),
+ 1, 2000000);
+ }
+
+ return 0;
+}
+
+/**
+ * cdns3_drd_switch_gadget - start/stop gadget
+ * @cdns: Pointer to controller context structure
+ * @on: 1 for start, 0 for stop
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on)
+{
+ int ret, val;
+ u32 reg = OTGCMD_OTG_DIS;
+
+ /* switch OTG core */
+ if (on) {
+ writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd);
+
+ dev_dbg(cdns->dev, "Waiting till Device mode is turned on\n");
+
+ ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val,
+ val & OTGSTS_DEV_READY,
+ 1, 100000);
+ if (ret) {
+ dev_err(cdns->dev, "timeout waiting for dev_ready\n");
+ return ret;
+ }
+ } else {
+ /*
+ * driver should wait at least 10us after disabling Device
+ * before turning-off Device (DEV_BUS_DROP)
+ */
+ usleep_range(20, 30);
+ writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP |
+ OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF,
+ &cdns->otg_regs->cmd);
+ /* Waiting till DEV_IDLE state.*/
+ readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
+ !(val & OTGSTATE_DEV_STATE_MASK),
+ 1, 2000000);
+ }
+
+ return 0;
+}
+
+/**
+ * cdns3_init_otg_mode - initialize drd controller
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+static int cdns3_init_otg_mode(struct cdns3 *cdns)
+{
+ int ret = 0;
+
+ cdns3_otg_disable_irq(cdns);
+ /* clear all interrupts */
+ writel(~0, &cdns->otg_regs->ivect);
+
+ ret = cdns3_set_mode(cdns, USB_DR_MODE_OTG);
+ if (ret)
+ return ret;
+
+ cdns3_otg_enable_irq(cdns);
+ return ret;
+}
+
+/**
+ * cdns3_drd_update_mode - initialize mode of operation
+ * @cdns: Pointer to controller context structure
+ *
+ * Returns 0 on success otherwise negative errno
+ */
+int cdns3_drd_update_mode(struct cdns3 *cdns)
+{
+ int ret = 0;
+
+ switch (cdns->dr_mode) {
+ case USB_DR_MODE_PERIPHERAL:
+ ret = cdns3_set_mode(cdns, USB_DR_MODE_PERIPHERAL);
+ break;
+ case USB_DR_MODE_HOST:
+ ret = cdns3_set_mode(cdns, USB_DR_MODE_HOST);
+ break;
+ case USB_DR_MODE_OTG:
+ ret = cdns3_init_otg_mode(cdns);
+ break;
+ default:
+ dev_err(cdns->dev, "Unsupported mode of operation %d\n",
+ cdns->dr_mode);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static irqreturn_t cdns3_drd_thread_irq(int irq, void *data)
+{
+ struct cdns3 *cdns = data;
+
+ cdns3_hw_role_switch(cdns);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * cdns3_drd_irq - interrupt handler for OTG events
+ *
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_drd_irq(int irq, void *data)
+{
+ irqreturn_t ret = IRQ_NONE;
+ struct cdns3 *cdns = data;
+ u32 reg;
+
+ if (cdns->dr_mode != USB_DR_MODE_OTG)
+ return ret;
+
+ reg = readl(&cdns->otg_regs->ivect);
+
+ if (!reg)
+ return ret;
+
+ if (reg & OTGIEN_ID_CHANGE_INT) {
+ dev_dbg(cdns->dev, "OTG IRQ: new ID: %d\n",
+ cdns3_get_id(cdns));
+
+ ret = IRQ_WAKE_THREAD;
+ }
+
+ if (reg & (OTGIEN_VBUSVALID_RISE_INT | OTGIEN_VBUSVALID_FALL_INT)) {
+ dev_dbg(cdns->dev, "OTG IRQ: new VBUS: %d\n",
+ cdns3_get_vbus(cdns));
+
+ ret = IRQ_WAKE_THREAD;
+ }
+
+ writel(~0, &cdns->otg_regs->ivect);
+ return ret;
+}
+
+int cdns3_drd_init(struct cdns3 *cdns)
+{
+ void __iomem *regs;
+ int ret = 0;
+ u32 state;
+
+ regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ /* Detection of DRD version. Controller has been released
+ * in two versions. Both are similar, but they have same changes
+ * in register maps.
+ * The first register in old version is command register and it's read
+ * only, so driver should read 0 from it. On the other hand, in v1
+ * the first register contains device ID number which is not set to 0.
+ * Driver uses this fact to detect the proper version of
+ * controller.
+ */
+ cdns->otg_v0_regs = regs;
+ if (!readl(&cdns->otg_v0_regs->cmd)) {
+ cdns->version = CDNS3_CONTROLLER_V0;
+ cdns->otg_v1_regs = NULL;
+ cdns->otg_regs = regs;
+ writel(1, &cdns->otg_v0_regs->simulate);
+ dev_info(cdns->dev, "DRD version v0 (%08x)\n",
+ readl(&cdns->otg_v0_regs->version));
+ } else {
+ cdns->otg_v0_regs = NULL;
+ cdns->otg_v1_regs = regs;
+ cdns->otg_regs = (void *)&cdns->otg_v1_regs->cmd;
+ cdns->version = CDNS3_CONTROLLER_V1;
+ writel(1, &cdns->otg_v1_regs->simulate);
+ dev_info(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
+ readl(&cdns->otg_v1_regs->did),
+ readl(&cdns->otg_v1_regs->rid));
+ }
+
+ state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts));
+
+ /* Update dr_mode according to STRAP configuration. */
+ cdns->dr_mode = USB_DR_MODE_OTG;
+ if (state == OTGSTS_STRAP_HOST) {
+ dev_dbg(cdns->dev, "Controller strapped to HOST\n");
+ cdns->dr_mode = USB_DR_MODE_HOST;
+ } else if (state == OTGSTS_STRAP_GADGET) {
+ dev_dbg(cdns->dev, "Controller strapped to PERIPHERAL\n");
+ cdns->dr_mode = USB_DR_MODE_PERIPHERAL;
+ }
+
+ ret = devm_request_threaded_irq(cdns->dev, cdns->otg_irq,
+ cdns3_drd_irq,
+ cdns3_drd_thread_irq,
+ IRQF_SHARED,
+ dev_name(cdns->dev), cdns);
+
+ if (ret) {
+ dev_err(cdns->dev, "couldn't get otg_irq\n");
+ return ret;
+ }
+
+ state = readl(&cdns->otg_regs->sts);
+ if (OTGSTS_OTG_NRDY(state) != 0) {
+ dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n");
+ return -ENODEV;
+ }
+
+ return ret;
+}
+
+int cdns3_drd_exit(struct cdns3 *cdns)
+{
+ cdns3_otg_disable_irq(cdns);
+ return 0;
+}
diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
new file mode 100644
index 000000000000..04e01c4d2377
--- /dev/null
+++ b/drivers/usb/cdns3/drd.h
@@ -0,0 +1,167 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USB3 DRD header file.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+#ifndef __LINUX_CDNS3_DRD
+#define __LINUX_CDNS3_DRD
+
+#include <linux/usb/otg.h>
+#include <linux/phy/phy.h>
+#include "core.h"
+
+/* DRD register interface for version v1. */
+struct cdns3_otg_regs {
+ __le32 did;
+ __le32 rid;
+ __le32 capabilities;
+ __le32 reserved1;
+ __le32 cmd;
+ __le32 sts;
+ __le32 state;
+ __le32 reserved2;
+ __le32 ien;
+ __le32 ivect;
+ __le32 refclk;
+ __le32 tmr;
+ __le32 reserved3[4];
+ __le32 simulate;
+ __le32 override;
+ __le32 susp_ctrl;
+ __le32 reserved4;
+ __le32 anasts;
+ __le32 adp_ramp_time;
+ __le32 ctrl1;
+ __le32 ctrl2;
+};
+
+/* DRD register interface for version v0. */
+struct cdns3_otg_legacy_regs {
+ __le32 cmd;
+ __le32 sts;
+ __le32 state;
+ __le32 refclk;
+ __le32 ien;
+ __le32 ivect;
+ __le32 reserved1[3];
+ __le32 tmr;
+ __le32 reserved2[2];
+ __le32 version;
+ __le32 capabilities;
+ __le32 reserved3[2];
+ __le32 simulate;
+ __le32 reserved4[5];
+ __le32 ctrl1;
+};
+
+/*
+ * Common registers interface for both version of DRD.
+ */
+struct cdns3_otg_common_regs {
+ __le32 cmd;
+ __le32 sts;
+ __le32 state;
+ __le32 different1;
+ __le32 ien;
+ __le32 ivect;
+};
+
+/* CDNS_RID - bitmasks */
+#define CDNS_RID(p) ((p) & GENMASK(15, 0))
+
+/* CDNS_VID - bitmasks */
+#define CDNS_DID(p) ((p) & GENMASK(31, 0))
+
+/* OTGCMD - bitmasks */
+/* "Request the bus for Device mode. */
+#define OTGCMD_DEV_BUS_REQ BIT(0)
+/* Request the bus for Host mode */
+#define OTGCMD_HOST_BUS_REQ BIT(1)
+/* Enable OTG mode. */
+#define OTGCMD_OTG_EN BIT(2)
+/* Disable OTG mode */
+#define OTGCMD_OTG_DIS BIT(3)
+/*"Configure OTG as A-Device. */
+#define OTGCMD_A_DEV_EN BIT(4)
+/*"Configure OTG as A-Device. */
+#define OTGCMD_A_DEV_DIS BIT(5)
+/* Drop the bus for Device mod e. */
+#define OTGCMD_DEV_BUS_DROP BIT(8)
+/* Drop the bus for Host mode*/
+#define OTGCMD_HOST_BUS_DROP BIT(9)
+/* Power Down USBSS-DEV. */
+#define OTGCMD_DEV_POWER_OFF BIT(11)
+/* Power Down CDNSXHCI. */
+#define OTGCMD_HOST_POWER_OFF BIT(12)
+
+/* OTGIEN - bitmasks */
+/* ID change interrupt enable */
+#define OTGIEN_ID_CHANGE_INT BIT(0)
+/* Vbusvalid fall detected interrupt enable.*/
+#define OTGIEN_VBUSVALID_RISE_INT BIT(4)
+/* Vbusvalid fall detected interrupt enable */
+#define OTGIEN_VBUSVALID_FALL_INT BIT(5)
+
+/* OTGSTS - bitmasks */
+/*
+ * Current value of the ID pin. It is only valid when idpullup in
+ * OTGCTRL1_TYPE register is set to '1'.
+ */
+#define OTGSTS_ID_VALUE BIT(0)
+/* Current value of the vbus_valid */
+#define OTGSTS_VBUS_VALID BIT(1)
+/* Current value of the b_sess_vld */
+#define OTGSTS_SESSION_VALID BIT(2)
+/*Device mode is active*/
+#define OTGSTS_DEV_ACTIVE BIT(3)
+/* Host mode is active. */
+#define OTGSTS_HOST_ACTIVE BIT(4)
+/* OTG Controller not ready. */
+#define OTGSTS_OTG_NRDY_MASK BIT(11)
+#define OTGSTS_OTG_NRDY(p) ((p) & OTGSTS_OTG_NRDY_MASK)
+/*
+ * Value of the strap pins.
+ * 000 - no default configuration
+ * 010 - Controller initiall configured as Host
+ * 100 - Controller initially configured as Device
+ */
+#define OTGSTS_STRAP(p) (((p) & GENMASK(14, 12)) >> 12)
+#define OTGSTS_STRAP_NO_DEFAULT_CFG 0x00
+#define OTGSTS_STRAP_HOST_OTG 0x01
+#define OTGSTS_STRAP_HOST 0x02
+#define OTGSTS_STRAP_GADGET 0x04
+/* Host mode is turned on. */
+#define OTGSTS_XHCI_READY BIT(26)
+/* "Device mode is turned on .*/
+#define OTGSTS_DEV_READY BIT(27)
+
+/* OTGSTATE- bitmasks */
+#define OTGSTATE_DEV_STATE_MASK GENMASK(2, 0)
+#define OTGSTATE_HOST_STATE_MASK GENMASK(5, 3)
+#define OTGSTATE_HOST_STATE_IDLE 0x0
+#define OTGSTATE_HOST_STATE_VBUS_FALL 0x7
+#define OTGSTATE_HOST_STATE(p) (((p) & OTGSTATE_HOST_STATE_MASK) >> 3)
+
+/* OTGREFCLK - bitmasks */
+#define OTGREFCLK_STB_CLK_SWITCH_EN BIT(31)
+
+/* OVERRIDE - bitmasks */
+#define OVERRIDE_IDPULLUP BIT(0)
+/* Only for CDNS3_CONTROLLER_V0 version */
+#define OVERRIDE_IDPULLUP_V0 BIT(24)
+
+int cdns3_is_host(struct cdns3 *cdns);
+int cdns3_is_device(struct cdns3 *cdns);
+int cdns3_get_id(struct cdns3 *cdns);
+int cdns3_get_vbus(struct cdns3 *cdns);
+int cdns3_drd_init(struct cdns3 *cdns);
+int cdns3_drd_exit(struct cdns3 *cdns);
+int cdns3_drd_update_mode(struct cdns3 *cdns);
+int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on);
+int cdns3_drd_switch_host(struct cdns3 *cdns, int on);
+int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode);
+
+#endif /* __LINUX_CDNS3_DRD */
diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
new file mode 100644
index 000000000000..44f652e8b5a2
--- /dev/null
+++ b/drivers/usb/cdns3/ep0.c
@@ -0,0 +1,886 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver - gadget side.
+ *
+ * Copyright (C) 2018 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Pawel Jez <pjez@cadence.com>,
+ * Pawel Laszczak <pawell@cadence.com>
+ * Peter Chen <peter.chen@nxp.com>
+ */
+
+#include <linux/usb/composite.h>
+#include <linux/iopoll.h>
+
+#include "gadget.h"
+#include "trace.h"
+
+static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+};
+
+/**
+ * cdns3_ep0_run_transfer - Do transfer on default endpoint hardware
+ * @priv_dev: extended gadget object
+ * @dma_addr: physical address where data is/will be stored
+ * @length: data length
+ * @erdy: set it to 1 when ERDY packet should be sent -
+ * exit from flow control state
+ */
+static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev,
+ dma_addr_t dma_addr,
+ unsigned int length, int erdy, int zlp)
+{
+ struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+ struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+
+ priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr);
+ priv_ep->trb_pool[0].length = TRB_LEN(length);
+
+ if (zlp) {
+ priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL);
+ priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr);
+ priv_ep->trb_pool[1].length = TRB_LEN(0);
+ priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC |
+ TRB_TYPE(TRB_NORMAL);
+ } else {
+ priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC |
+ TRB_TYPE(TRB_NORMAL);
+ priv_ep->trb_pool[1].control = 0;
+ }
+
+ trace_cdns3_prepare_trb(priv_ep, priv_ep->trb_pool);
+
+ cdns3_select_ep(priv_dev, priv_dev->ep0_data_dir);
+
+ writel(EP_STS_TRBERR, &regs->ep_sts);
+ writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), &regs->ep_traddr);
+ trace_cdns3_doorbell_ep0(priv_dev->ep0_data_dir ? "ep0in" : "ep0out",
+ readl(&regs->ep_traddr));
+
+ /* TRB should be prepared before starting transfer. */
+ writel(EP_CMD_DRDY, &regs->ep_cmd);
+
+ /* Resume controller before arming transfer. */
+ __cdns3_gadget_wakeup(priv_dev);
+
+ if (erdy)
+ writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd);
+}
+
+/**
+ * cdns3_ep0_delegate_req - Returns status of handling setup packet
+ * Setup is handled by gadget driver
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns zero on success or negative value on failure
+ */
+static int cdns3_ep0_delegate_req(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl_req)
+{
+ int ret;
+
+ spin_unlock(&priv_dev->lock);
+ priv_dev->setup_pending = 1;
+ ret = priv_dev->gadget_driver->setup(&priv_dev->gadget, ctrl_req);
+ priv_dev->setup_pending = 0;
+ spin_lock(&priv_dev->lock);
+ return ret;
+}
+
+static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev)
+{
+ priv_dev->ep0_data_dir = 0;
+ priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
+ cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
+ sizeof(struct usb_ctrlrequest), 0, 0);
+}
+
+static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev,
+ u8 send_stall, u8 send_erdy)
+{
+ struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+ struct usb_request *request;
+
+ request = cdns3_next_request(&priv_ep->pending_req_list);
+ if (request)
+ list_del_init(&request->list);
+
+ if (send_stall) {
+ trace_cdns3_halt(priv_ep, send_stall, 0);
+ /* set_stall on ep0 */
+ cdns3_select_ep(priv_dev, 0x00);
+ writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd);
+ } else {
+ cdns3_prepare_setup_packet(priv_dev);
+ }
+
+ priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
+ writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL,
+ &priv_dev->regs->ep_cmd);
+
+ cdns3_allow_enable_l1(priv_dev, 1);
+}
+
+/**
+ * cdns3_req_ep0_set_configuration - Handling of SET_CONFIG standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, USB_GADGET_DELAYED_STATUS on deferred status stage,
+ * error code on error
+ */
+static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl_req)
+{
+ enum usb_device_state device_state = priv_dev->gadget.state;
+ struct cdns3_endpoint *priv_ep;
+ u32 config = le16_to_cpu(ctrl_req->wValue);
+ int result = 0;
+ int i;
+
+ switch (device_state) {
+ case USB_STATE_ADDRESS:
+ /* Configure non-control EPs */
+ for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
+ priv_ep = priv_dev->eps[i];
+ if (!priv_ep)
+ continue;
+
+ if (priv_ep->flags & EP_CLAIMED)
+ cdns3_ep_config(priv_ep);
+ }
+
+ result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+
+ if (result)
+ return result;
+
+ if (config) {
+ cdns3_set_hw_configuration(priv_dev);
+ } else {
+ cdns3_hw_reset_eps_config(priv_dev);
+ usb_gadget_set_state(&priv_dev->gadget,
+ USB_STATE_ADDRESS);
+ }
+ break;
+ case USB_STATE_CONFIGURED:
+ result = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+
+ if (!config && !result) {
+ cdns3_hw_reset_eps_config(priv_dev);
+ usb_gadget_set_state(&priv_dev->gadget,
+ USB_STATE_ADDRESS);
+ }
+ break;
+ default:
+ result = -EINVAL;
+ }
+
+ return result;
+}
+
+/**
+ * cdns3_req_ep0_set_address - Handling of SET_ADDRESS standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_address(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl_req)
+{
+ enum usb_device_state device_state = priv_dev->gadget.state;
+ u32 reg;
+ u32 addr;
+
+ addr = le16_to_cpu(ctrl_req->wValue);
+
+ if (addr > USB_DEVICE_MAX_ADDRESS) {
+ dev_err(priv_dev->dev,
+ "Device address (%d) cannot be greater than %d\n",
+ addr, USB_DEVICE_MAX_ADDRESS);
+ return -EINVAL;
+ }
+
+ if (device_state == USB_STATE_CONFIGURED) {
+ dev_err(priv_dev->dev,
+ "can't set_address from configured state\n");
+ return -EINVAL;
+ }
+
+ reg = readl(&priv_dev->regs->usb_cmd);
+
+ writel(reg | USB_CMD_FADDR(addr) | USB_CMD_SET_ADDR,
+ &priv_dev->regs->usb_cmd);
+
+ usb_gadget_set_state(&priv_dev->gadget,
+ (addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT));
+
+ return 0;
+}
+
+/**
+ * cdns3_req_ep0_get_status - Handling of GET_STATUS standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl)
+{
+ __le16 *response_pkt;
+ u16 usb_status = 0;
+ u32 recip;
+
+ recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+ switch (recip) {
+ case USB_RECIP_DEVICE:
+ /* self powered */
+ if (priv_dev->is_selfpowered)
+ usb_status = BIT(USB_DEVICE_SELF_POWERED);
+
+ if (priv_dev->wake_up_flag)
+ usb_status |= BIT(USB_DEVICE_REMOTE_WAKEUP);
+
+ if (priv_dev->gadget.speed != USB_SPEED_SUPER)
+ break;
+
+ if (priv_dev->u1_allowed)
+ usb_status |= BIT(USB_DEV_STAT_U1_ENABLED);
+
+ if (priv_dev->u2_allowed)
+ usb_status |= BIT(USB_DEV_STAT_U2_ENABLED);
+
+ break;
+ case USB_RECIP_INTERFACE:
+ return cdns3_ep0_delegate_req(priv_dev, ctrl);
+ case USB_RECIP_ENDPOINT:
+ /* check if endpoint is stalled */
+ cdns3_select_ep(priv_dev, ctrl->wIndex);
+ if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)))
+ usb_status = BIT(USB_ENDPOINT_HALT);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ response_pkt = (__le16 *)priv_dev->setup_buf;
+ *response_pkt = cpu_to_le16(usb_status);
+
+ cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
+ sizeof(*response_pkt), 1, 0);
+ return 0;
+}
+
+static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl,
+ int set)
+{
+ enum usb_device_state state;
+ enum usb_device_speed speed;
+ int ret = 0;
+ u32 wValue;
+ u16 tmode;
+
+ wValue = le16_to_cpu(ctrl->wValue);
+ state = priv_dev->gadget.state;
+ speed = priv_dev->gadget.speed;
+
+ switch (wValue) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ priv_dev->wake_up_flag = !!set;
+ break;
+ case USB_DEVICE_U1_ENABLE:
+ if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
+ return -EINVAL;
+
+ priv_dev->u1_allowed = !!set;
+ break;
+ case USB_DEVICE_U2_ENABLE:
+ if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER)
+ return -EINVAL;
+
+ priv_dev->u2_allowed = !!set;
+ break;
+ case USB_DEVICE_LTM_ENABLE:
+ ret = -EINVAL;
+ break;
+ case USB_DEVICE_TEST_MODE:
+ if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH)
+ return -EINVAL;
+
+ tmode = le16_to_cpu(ctrl->wIndex);
+
+ if (!set || (tmode & 0xff) != 0)
+ return -EINVAL;
+
+ switch (tmode >> 8) {
+ case TEST_J:
+ case TEST_K:
+ case TEST_SE0_NAK:
+ case TEST_PACKET:
+ cdns3_ep0_complete_setup(priv_dev, 0, 1);
+ /**
+ * Little delay to give the controller some time
+ * for sending status stage.
+ * This time should be less then 3ms.
+ */
+ usleep_range(1000, 2000);
+ cdns3_set_register_bit(&priv_dev->regs->usb_cmd,
+ USB_CMD_STMODE |
+ USB_STS_TMODE_SEL(tmode - 1));
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int cdns3_ep0_feature_handle_intf(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl,
+ int set)
+{
+ u32 wValue;
+ int ret = 0;
+
+ wValue = le16_to_cpu(ctrl->wValue);
+
+ switch (wValue) {
+ case USB_INTRF_FUNC_SUSPEND:
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl,
+ int set)
+{
+ struct cdns3_endpoint *priv_ep;
+ int ret = 0;
+ u8 index;
+
+ if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT)
+ return -EINVAL;
+
+ if (!(ctrl->wIndex & ~USB_DIR_IN))
+ return 0;
+
+ index = cdns3_ep_addr_to_index(ctrl->wIndex);
+ priv_ep = priv_dev->eps[index];
+
+ cdns3_select_ep(priv_dev, ctrl->wIndex);
+
+ if (set)
+ __cdns3_gadget_ep_set_halt(priv_ep);
+ else if (!(priv_ep->flags & EP_WEDGE))
+ ret = __cdns3_gadget_ep_clear_halt(priv_ep);
+
+ cdns3_select_ep(priv_dev, 0x00);
+
+ return ret;
+}
+
+/**
+ * cdns3_req_ep0_handle_feature -
+ * Handling of GET/SET_FEATURE standard USB request
+ *
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ * @set: must be set to 1 for SET_FEATURE request
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_handle_feature(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl,
+ int set)
+{
+ int ret = 0;
+ u32 recip;
+
+ recip = ctrl->bRequestType & USB_RECIP_MASK;
+
+ switch (recip) {
+ case USB_RECIP_DEVICE:
+ ret = cdns3_ep0_feature_handle_device(priv_dev, ctrl, set);
+ break;
+ case USB_RECIP_INTERFACE:
+ ret = cdns3_ep0_feature_handle_intf(priv_dev, ctrl, set);
+ break;
+ case USB_RECIP_ENDPOINT:
+ ret = cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * cdns3_req_ep0_set_sel - Handling of SET_SEL standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl_req)
+{
+ if (priv_dev->gadget.state < USB_STATE_ADDRESS)
+ return -EINVAL;
+
+ if (ctrl_req->wLength != 6) {
+ dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n",
+ ctrl_req->wLength);
+ return -EINVAL;
+ }
+
+ cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, 6, 1, 0);
+ return 0;
+}
+
+/**
+ * cdns3_req_ep0_set_isoch_delay -
+ * Handling of GET_ISOCH_DELAY standard USB request
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl_req)
+{
+ if (ctrl_req->wIndex || ctrl_req->wLength)
+ return -EINVAL;
+
+ priv_dev->isoch_delay = ctrl_req->wValue;
+
+ return 0;
+}
+
+/**
+ * cdns3_ep0_standard_request - Handling standard USB requests
+ * @priv_dev: extended gadget object
+ * @ctrl_req: pointer to received setup packet
+ *
+ * Returns 0 if success, error code on error
+ */
+static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev,
+ struct usb_ctrlrequest *ctrl_req)
+{
+ int ret;
+
+ switch (ctrl_req->bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req);
+ break;
+ case USB_REQ_SET_CONFIGURATION:
+ ret = cdns3_req_ep0_set_configuration(priv_dev, ctrl_req);
+ break;
+ case USB_REQ_GET_STATUS:
+ ret = cdns3_req_ep0_get_status(priv_dev, ctrl_req);
+ break;
+ case USB_REQ_CLEAR_FEATURE:
+ ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0);
+ break;
+ case USB_REQ_SET_FEATURE:
+ ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 1);
+ break;
+ case USB_REQ_SET_SEL:
+ ret = cdns3_req_ep0_set_sel(priv_dev, ctrl_req);
+ break;
+ case USB_REQ_SET_ISOCH_DELAY:
+ ret = cdns3_req_ep0_set_isoch_delay(priv_dev, ctrl_req);
+ break;
+ default:
+ ret = cdns3_ep0_delegate_req(priv_dev, ctrl_req);
+ break;
+ }
+
+ return ret;
+}
+
+static void __pending_setup_status_handler(struct cdns3_device *priv_dev)
+{
+ struct usb_request *request = priv_dev->pending_status_request;
+
+ if (priv_dev->status_completion_no_call && request &&
+ request->complete) {
+ request->complete(&priv_dev->eps[0]->endpoint, request);
+ priv_dev->status_completion_no_call = 0;
+ }
+}
+
+void cdns3_pending_setup_status_handler(struct work_struct *work)
+{
+ struct cdns3_device *priv_dev = container_of(work, struct cdns3_device,
+ pending_status_wq);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+ __pending_setup_status_handler(priv_dev);
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+}
+
+/**
+ * cdns3_ep0_setup_phase - Handling setup USB requests
+ * @priv_dev: extended gadget object
+ */
+static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev)
+{
+ struct usb_ctrlrequest *ctrl = priv_dev->setup_buf;
+ struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+ int result;
+
+ priv_dev->ep0_data_dir = ctrl->bRequestType & USB_DIR_IN;
+
+ trace_cdns3_ctrl_req(ctrl);
+
+ if (!list_empty(&priv_ep->pending_req_list)) {
+ struct usb_request *request;
+
+ request = cdns3_next_request(&priv_ep->pending_req_list);
+ priv_ep->dir = priv_dev->ep0_data_dir;
+ cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+ -ECONNRESET);
+ }
+
+ if (le16_to_cpu(ctrl->wLength))
+ priv_dev->ep0_stage = CDNS3_DATA_STAGE;
+ else
+ priv_dev->ep0_stage = CDNS3_STATUS_STAGE;
+
+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+ result = cdns3_ep0_standard_request(priv_dev, ctrl);
+ else
+ result = cdns3_ep0_delegate_req(priv_dev, ctrl);
+
+ if (result == USB_GADGET_DELAYED_STATUS)
+ return;
+
+ if (result < 0)
+ cdns3_ep0_complete_setup(priv_dev, 1, 1);
+ else if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE)
+ cdns3_ep0_complete_setup(priv_dev, 0, 1);
+}
+
+static void cdns3_transfer_completed(struct cdns3_device *priv_dev)
+{
+ struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
+
+ if (!list_empty(&priv_ep->pending_req_list)) {
+ struct usb_request *request;
+
+ trace_cdns3_complete_trb(priv_ep, priv_ep->trb_pool);
+ request = cdns3_next_request(&priv_ep->pending_req_list);
+
+ request->actual =
+ TRB_LEN(le32_to_cpu(priv_ep->trb_pool->length));
+
+ priv_ep->dir = priv_dev->ep0_data_dir;
+ cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), 0);
+ }
+
+ cdns3_ep0_complete_setup(priv_dev, 0, 0);
+}
+
+/**
+ * cdns3_check_new_setup - Check if controller receive new SETUP packet.
+ * @priv_dev: extended gadget object
+ *
+ * The SETUP packet can be kept in on-chip memory or in system memory.
+ */
+static bool cdns3_check_new_setup(struct cdns3_device *priv_dev)
+{
+ u32 ep_sts_reg;
+
+ cdns3_select_ep(priv_dev, 0 | USB_DIR_OUT);
+ ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+
+ return !!(ep_sts_reg & (EP_STS_SETUP | EP_STS_STPWAIT));
+}
+
+/**
+ * cdns3_check_ep0_interrupt_proceed - Processes interrupt related to endpoint 0
+ * @priv_dev: extended gadget object
+ * @dir: USB_DIR_IN for IN direction, USB_DIR_OUT for OUT direction
+ */
+void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
+{
+ u32 ep_sts_reg;
+
+ cdns3_select_ep(priv_dev, dir);
+
+ ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+ writel(ep_sts_reg, &priv_dev->regs->ep_sts);
+
+ trace_cdns3_ep0_irq(priv_dev, ep_sts_reg);
+
+ __pending_setup_status_handler(priv_dev);
+
+ if (ep_sts_reg & EP_STS_SETUP)
+ priv_dev->wait_for_setup = 1;
+
+ if (priv_dev->wait_for_setup && ep_sts_reg & EP_STS_IOC) {
+ priv_dev->wait_for_setup = 0;
+ cdns3_allow_enable_l1(priv_dev, 0);
+ cdns3_ep0_setup_phase(priv_dev);
+ } else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
+ priv_dev->ep0_data_dir = dir;
+ cdns3_transfer_completed(priv_dev);
+ }
+
+ if (ep_sts_reg & EP_STS_DESCMIS) {
+ if (dir == 0 && !priv_dev->setup_pending)
+ cdns3_prepare_setup_packet(priv_dev);
+ }
+}
+
+/**
+ * cdns3_gadget_ep0_enable
+ * Function shouldn't be called by gadget driver,
+ * endpoint 0 is allways active
+ */
+static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ return -EINVAL;
+}
+
+/**
+ * cdns3_gadget_ep0_disable
+ * Function shouldn't be called by gadget driver,
+ * endpoint 0 is allways active
+ */
+static int cdns3_gadget_ep0_disable(struct usb_ep *ep)
+{
+ return -EINVAL;
+}
+
+/**
+ * cdns3_gadget_ep0_set_halt
+ * @ep: pointer to endpoint zero object
+ * @value: 1 for set stall, 0 for clear stall
+ *
+ * Returns 0
+ */
+static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+ /* TODO */
+ return 0;
+}
+
+/**
+ * cdns3_gadget_ep0_queue Transfer data on endpoint zero
+ * @ep: pointer to endpoint zero object
+ * @request: pointer to request object
+ * @gfp_flags: gfp flags
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
+ struct usb_request *request,
+ gfp_t gfp_flags)
+{
+ struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ unsigned long flags;
+ int erdy_sent = 0;
+ int ret = 0;
+ u8 zlp = 0;
+
+ trace_cdns3_ep0_queue(priv_dev, request);
+
+ /* cancel the request if controller receive new SETUP packet. */
+ if (cdns3_check_new_setup(priv_dev))
+ return -ECONNRESET;
+
+ /* send STATUS stage. Should be called only for SET_CONFIGURATION */
+ if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) {
+ spin_lock_irqsave(&priv_dev->lock, flags);
+ cdns3_select_ep(priv_dev, 0x00);
+
+ erdy_sent = !priv_dev->hw_configured_flag;
+ cdns3_set_hw_configuration(priv_dev);
+
+ if (!erdy_sent)
+ cdns3_ep0_complete_setup(priv_dev, 0, 1);
+
+ cdns3_allow_enable_l1(priv_dev, 1);
+
+ request->actual = 0;
+ priv_dev->status_completion_no_call = true;
+ priv_dev->pending_status_request = request;
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+ /*
+ * Since there is no completion interrupt for status stage,
+ * it needs to call ->completion in software after
+ * ep0_queue is back.
+ */
+ queue_work(system_freezable_wq, &priv_dev->pending_status_wq);
+ return 0;
+ }
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+ if (!list_empty(&priv_ep->pending_req_list)) {
+ dev_err(priv_dev->dev,
+ "can't handle multiple requests for ep0\n");
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ return -EBUSY;
+ }
+
+ ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
+ priv_dev->ep0_data_dir);
+ if (ret) {
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ dev_err(priv_dev->dev, "failed to map request\n");
+ return -EINVAL;
+ }
+
+ request->status = -EINPROGRESS;
+ list_add_tail(&request->list, &priv_ep->pending_req_list);
+
+ if (request->zero && request->length &&
+ (request->length % ep->maxpacket == 0))
+ zlp = 1;
+
+ cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1, zlp);
+
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+ return ret;
+}
+
+/**
+ * cdns3_gadget_ep_set_wedge Set wedge on selected endpoint
+ * @ep: endpoint object
+ *
+ * Returns 0
+ */
+int cdns3_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+ struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+ dev_dbg(priv_dev->dev, "Wedge for %s\n", ep->name);
+ cdns3_gadget_ep_set_halt(ep, 1);
+ priv_ep->flags |= EP_WEDGE;
+
+ return 0;
+}
+
+const struct usb_ep_ops cdns3_gadget_ep0_ops = {
+ .enable = cdns3_gadget_ep0_enable,
+ .disable = cdns3_gadget_ep0_disable,
+ .alloc_request = cdns3_gadget_ep_alloc_request,
+ .free_request = cdns3_gadget_ep_free_request,
+ .queue = cdns3_gadget_ep0_queue,
+ .dequeue = cdns3_gadget_ep_dequeue,
+ .set_halt = cdns3_gadget_ep0_set_halt,
+ .set_wedge = cdns3_gadget_ep_set_wedge,
+};
+
+/**
+ * cdns3_ep0_config - Configures default endpoint
+ * @priv_dev: extended gadget object
+ *
+ * Functions sets parameters: maximal packet size and enables interrupts
+ */
+void cdns3_ep0_config(struct cdns3_device *priv_dev)
+{
+ struct cdns3_usb_regs __iomem *regs;
+ struct cdns3_endpoint *priv_ep;
+ u32 max_packet_size = 64;
+
+ regs = priv_dev->regs;
+
+ if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+ max_packet_size = 512;
+
+ priv_ep = priv_dev->eps[0];
+
+ if (!list_empty(&priv_ep->pending_req_list)) {
+ struct usb_request *request;
+
+ request = cdns3_next_request(&priv_ep->pending_req_list);
+ list_del_init(&request->list);
+ }
+
+ priv_dev->u1_allowed = 0;
+ priv_dev->u2_allowed = 0;
+
+ priv_dev->gadget.ep0->maxpacket = max_packet_size;
+ cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
+
+ /* init ep out */
+ cdns3_select_ep(priv_dev, USB_DIR_OUT);
+
+ if (priv_dev->dev_ver >= DEV_VER_V3) {
+ cdns3_set_register_bit(&priv_dev->regs->dtrans,
+ BIT(0) | BIT(16));
+ cdns3_set_register_bit(&priv_dev->regs->tdl_from_trb,
+ BIT(0) | BIT(16));
+ }
+
+ writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size),
+ &regs->ep_cfg);
+
+ writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN,
+ &regs->ep_sts_en);
+
+ /* init ep in */
+ cdns3_select_ep(priv_dev, USB_DIR_IN);
+
+ writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size),
+ &regs->ep_cfg);
+
+ writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, &regs->ep_sts_en);
+
+ cdns3_set_register_bit(&regs->usb_conf, USB_CONF_U1DS | USB_CONF_U2DS);
+}
+
+/**
+ * cdns3_init_ep0 Initializes software endpoint 0 of gadget
+ * @priv_dev: extended gadget object
+ * @ep_priv: extended endpoint object
+ *
+ * Returns 0 on success else error code.
+ */
+int cdns3_init_ep0(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep)
+{
+ sprintf(priv_ep->name, "ep0");
+
+ /* fill linux fields */
+ priv_ep->endpoint.ops = &cdns3_gadget_ep0_ops;
+ priv_ep->endpoint.maxburst = 1;
+ usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
+ CDNS3_EP0_MAX_PACKET_LIMIT);
+ priv_ep->endpoint.address = 0;
+ priv_ep->endpoint.caps.type_control = 1;
+ priv_ep->endpoint.caps.dir_in = 1;
+ priv_ep->endpoint.caps.dir_out = 1;
+ priv_ep->endpoint.name = priv_ep->name;
+ priv_ep->endpoint.desc = &cdns3_gadget_ep0_desc;
+ priv_dev->gadget.ep0 = &priv_ep->endpoint;
+ priv_ep->type = USB_ENDPOINT_XFER_CONTROL;
+
+ return cdns3_allocate_trb_pool(priv_ep);
+}
diff --git a/drivers/usb/cdns3/gadget-export.h b/drivers/usb/cdns3/gadget-export.h
new file mode 100644
index 000000000000..577469eee961
--- /dev/null
+++ b/drivers/usb/cdns3/gadget-export.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS DRD Driver - Gadget Export APIs.
+ *
+ * Copyright (C) 2017 NXP
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_GADGET_EXPORT
+#define __LINUX_CDNS3_GADGET_EXPORT
+
+#ifdef CONFIG_USB_CDNS3_GADGET
+
+int cdns3_gadget_init(struct cdns3 *cdns);
+void cdns3_gadget_exit(struct cdns3 *cdns);
+#else
+
+static inline int cdns3_gadget_init(struct cdns3 *cdns)
+{
+ return -ENXIO;
+}
+
+static inline void cdns3_gadget_exit(struct cdns3 *cdns) { }
+
+#endif
+
+#endif /* __LINUX_CDNS3_GADGET_EXPORT */
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
new file mode 100644
index 000000000000..228cdc4ab886
--- /dev/null
+++ b/drivers/usb/cdns3/gadget.c
@@ -0,0 +1,2744 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver - gadget side.
+ *
+ * Copyright (C) 2018-2019 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Pawel Jez <pjez@cadence.com>,
+ * Pawel Laszczak <pawell@cadence.com>
+ * Peter Chen <peter.chen@nxp.com>
+ */
+
+/*
+ * Work around 1:
+ * At some situations, the controller may get stale data address in TRB
+ * at below sequences:
+ * 1. Controller read TRB includes data address
+ * 2. Software updates TRBs includes data address and Cycle bit
+ * 3. Controller read TRB which includes Cycle bit
+ * 4. DMA run with stale data address
+ *
+ * To fix this problem, driver needs to make the first TRB in TD as invalid.
+ * After preparing all TRBs driver needs to check the position of DMA and
+ * if the DMA point to the first just added TRB and doorbell is 1,
+ * then driver must defer making this TRB as valid. This TRB will be make
+ * as valid during adding next TRB only if DMA is stopped or at TRBERR
+ * interrupt.
+ *
+ * Issue has been fixed in DEV_VER_V3 version of controller.
+ *
+ * Work around 2:
+ * Controller for OUT endpoints has shared on-chip buffers for all incoming
+ * packets, including ep0out. It's FIFO buffer, so packets must be handle by DMA
+ * in correct order. If the first packet in the buffer will not be handled,
+ * then the following packets directed for other endpoints and functions
+ * will be blocked.
+ * Additionally the packets directed to one endpoint can block entire on-chip
+ * buffers. In this case transfer to other endpoints also will blocked.
+ *
+ * To resolve this issue after raising the descriptor missing interrupt
+ * driver prepares internal usb_request object and use it to arm DMA transfer.
+ *
+ * The problematic situation was observed in case when endpoint has been enabled
+ * but no usb_request were queued. Driver try detects such endpoints and will
+ * use this workaround only for these endpoint.
+ *
+ * Driver use limited number of buffer. This number can be set by macro
+ * CDNS3_WA2_NUM_BUFFERS.
+ *
+ * Such blocking situation was observed on ACM gadget. For this function
+ * host send OUT data packet but ACM function is not prepared for this packet.
+ * It's cause that buffer placed in on chip memory block transfer to other
+ * endpoints.
+ *
+ * Issue has been fixed in DEV_VER_V2 version of controller.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+
+#include "core.h"
+#include "gadget-export.h"
+#include "gadget.h"
+#include "trace.h"
+#include "drd.h"
+
+static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
+ struct usb_request *request,
+ gfp_t gfp_flags);
+
+/**
+ * cdns3_set_register_bit - set bit in given register.
+ * @ptr: address of device controller register to be read and changed
+ * @mask: bits requested to set
+ */
+void cdns3_set_register_bit(void __iomem *ptr, u32 mask)
+{
+ mask = readl(ptr) | mask;
+ writel(mask, ptr);
+}
+
+/**
+ * cdns3_ep_addr_to_index - Macro converts endpoint address to
+ * index of endpoint object in cdns3_device.eps[] container
+ * @ep_addr: endpoint address for which endpoint object is required
+ *
+ */
+u8 cdns3_ep_addr_to_index(u8 ep_addr)
+{
+ return (((ep_addr & 0x7F)) + ((ep_addr & USB_DIR_IN) ? 16 : 0));
+}
+
+static int cdns3_get_dma_pos(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep)
+{
+ int dma_index;
+
+ dma_index = readl(&priv_dev->regs->ep_traddr) - priv_ep->trb_pool_dma;
+
+ return dma_index / TRB_SIZE;
+}
+
+/**
+ * cdns3_next_request - returns next request from list
+ * @list: list containing requests
+ *
+ * Returns request or NULL if no requests in list
+ */
+struct usb_request *cdns3_next_request(struct list_head *list)
+{
+ return list_first_entry_or_null(list, struct usb_request, list);
+}
+
+/**
+ * cdns3_next_align_buf - returns next buffer from list
+ * @list: list containing buffers
+ *
+ * Returns buffer or NULL if no buffers in list
+ */
+struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
+{
+ return list_first_entry_or_null(list, struct cdns3_aligned_buf, list);
+}
+
+/**
+ * cdns3_next_priv_request - returns next request from list
+ * @list: list containing requests
+ *
+ * Returns request or NULL if no requests in list
+ */
+struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
+{
+ return list_first_entry_or_null(list, struct cdns3_request, list);
+}
+
+/**
+ * select_ep - selects endpoint
+ * @priv_dev: extended gadget object
+ * @ep: endpoint address
+ */
+void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep)
+{
+ if (priv_dev->selected_ep == ep)
+ return;
+
+ priv_dev->selected_ep = ep;
+ writel(ep, &priv_dev->regs->ep_sel);
+}
+
+dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
+ struct cdns3_trb *trb)
+{
+ u32 offset = (char *)trb - (char *)priv_ep->trb_pool;
+
+ return priv_ep->trb_pool_dma + offset;
+}
+
+int cdns3_ring_size(struct cdns3_endpoint *priv_ep)
+{
+ switch (priv_ep->type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ return TRB_ISO_RING_SIZE;
+ case USB_ENDPOINT_XFER_CONTROL:
+ return TRB_CTRL_RING_SIZE;
+ default:
+ return TRB_RING_SIZE;
+ }
+}
+
+/**
+ * cdns3_allocate_trb_pool - Allocates TRB's pool for selected endpoint
+ * @priv_ep: endpoint object
+ *
+ * Function will return 0 on success or -ENOMEM on allocation error
+ */
+int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ int ring_size = cdns3_ring_size(priv_ep);
+ struct cdns3_trb *link_trb;
+
+ if (!priv_ep->trb_pool) {
+ priv_ep->trb_pool = dma_alloc_coherent(priv_dev->sysdev,
+ ring_size,
+ &priv_ep->trb_pool_dma,
+ GFP_DMA32 | GFP_ATOMIC);
+ if (!priv_ep->trb_pool)
+ return -ENOMEM;
+ } else {
+ memset(priv_ep->trb_pool, 0, ring_size);
+ }
+
+ if (!priv_ep->num)
+ return 0;
+
+ priv_ep->num_trbs = ring_size / TRB_SIZE;
+ /* Initialize the last TRB as Link TRB. */
+ link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1));
+ link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma);
+ link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE;
+
+ return 0;
+}
+
+static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+ if (priv_ep->trb_pool) {
+ dma_free_coherent(priv_dev->sysdev,
+ cdns3_ring_size(priv_ep),
+ priv_ep->trb_pool, priv_ep->trb_pool_dma);
+ priv_ep->trb_pool = NULL;
+ }
+}
+
+/**
+ * cdns3_ep_stall_flush - Stalls and flushes selected endpoint
+ * @priv_ep: endpoint object
+ *
+ * Endpoint must be selected before call to this function
+ */
+static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ int val;
+
+ trace_cdns3_halt(priv_ep, 1, 1);
+
+ writel(EP_CMD_DFLUSH | EP_CMD_ERDY | EP_CMD_SSTALL,
+ &priv_dev->regs->ep_cmd);
+
+ /* wait for DFLUSH cleared */
+ readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+ !(val & EP_CMD_DFLUSH), 1, 1000);
+ priv_ep->flags |= EP_STALLED;
+ priv_ep->flags &= ~EP_STALL_PENDING;
+}
+
+/**
+ * cdns3_hw_reset_eps_config - reset endpoints configuration kept by controller.
+ * @priv_dev: extended gadget object
+ */
+void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev)
+{
+ writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf);
+
+ cdns3_allow_enable_l1(priv_dev, 0);
+ priv_dev->hw_configured_flag = 0;
+ priv_dev->onchip_used_size = 0;
+ priv_dev->out_mem_is_allocated = 0;
+ priv_dev->wait_for_setup = 0;
+}
+
+/**
+ * cdns3_ep_inc_trb - increment a trb index.
+ * @index: Pointer to the TRB index to increment.
+ * @cs: Cycle state
+ * @trb_in_seg: number of TRBs in segment
+ *
+ * The index should never point to the link TRB. After incrementing,
+ * if it is point to the link TRB, wrap around to the beginning and revert
+ * cycle state bit The
+ * link TRB is always at the last TRB entry.
+ */
+static void cdns3_ep_inc_trb(int *index, u8 *cs, int trb_in_seg)
+{
+ (*index)++;
+ if (*index == (trb_in_seg - 1)) {
+ *index = 0;
+ *cs ^= 1;
+ }
+}
+
+/**
+ * cdns3_ep_inc_enq - increment endpoint's enqueue pointer
+ * @priv_ep: The endpoint whose enqueue pointer we're incrementing
+ */
+static void cdns3_ep_inc_enq(struct cdns3_endpoint *priv_ep)
+{
+ priv_ep->free_trbs--;
+ cdns3_ep_inc_trb(&priv_ep->enqueue, &priv_ep->pcs, priv_ep->num_trbs);
+}
+
+/**
+ * cdns3_ep_inc_deq - increment endpoint's dequeue pointer
+ * @priv_ep: The endpoint whose dequeue pointer we're incrementing
+ */
+static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep)
+{
+ priv_ep->free_trbs++;
+ cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
+}
+
+void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req)
+{
+ struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
+ int current_trb = priv_req->start_trb;
+
+ while (current_trb != priv_req->end_trb) {
+ cdns3_ep_inc_deq(priv_ep);
+ current_trb = priv_ep->dequeue;
+ }
+
+ cdns3_ep_inc_deq(priv_ep);
+}
+
+/**
+ * cdns3_allow_enable_l1 - enable/disable permits to transition to L1.
+ * @priv_dev: Extended gadget object
+ * @enable: Enable/disable permit to transition to L1.
+ *
+ * If bit USB_CONF_L1EN is set and device receive Extended Token packet,
+ * then controller answer with ACK handshake.
+ * If bit USB_CONF_L1DS is set and device receive Extended Token packet,
+ * then controller answer with NYET handshake.
+ */
+void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable)
+{
+ if (enable)
+ writel(USB_CONF_L1EN, &priv_dev->regs->usb_conf);
+ else
+ writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf);
+}
+
+enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev)
+{
+ u32 reg;
+
+ reg = readl(&priv_dev->regs->usb_sts);
+
+ if (DEV_SUPERSPEED(reg))
+ return USB_SPEED_SUPER;
+ else if (DEV_HIGHSPEED(reg))
+ return USB_SPEED_HIGH;
+ else if (DEV_FULLSPEED(reg))
+ return USB_SPEED_FULL;
+ else if (DEV_LOWSPEED(reg))
+ return USB_SPEED_LOW;
+ return USB_SPEED_UNKNOWN;
+}
+
+/**
+ * cdns3_start_all_request - add to ring all request not started
+ * @priv_dev: Extended gadget object
+ * @priv_ep: The endpoint for whom request will be started.
+ *
+ * Returns return ENOMEM if transfer ring i not enough TRBs to start
+ * all requests.
+ */
+static int cdns3_start_all_request(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep)
+{
+ struct usb_request *request;
+ int ret = 0;
+
+ while (!list_empty(&priv_ep->deferred_req_list)) {
+ request = cdns3_next_request(&priv_ep->deferred_req_list);
+
+ ret = cdns3_ep_run_transfer(priv_ep, request);
+ if (ret)
+ return ret;
+
+ list_del(&request->list);
+ list_add_tail(&request->list,
+ &priv_ep->pending_req_list);
+ }
+
+ priv_ep->flags &= ~EP_RING_FULL;
+ return ret;
+}
+
+/*
+ * WA2: Set flag for all not ISOC OUT endpoints. If this flag is set
+ * driver try to detect whether endpoint need additional internal
+ * buffer for unblocking on-chip FIFO buffer. This flag will be cleared
+ * if before first DESCMISS interrupt the DMA will be armed.
+ */
+#define cdns3_wa2_enable_detection(priv_dev, ep_priv, reg) do { \
+ if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { \
+ priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET; \
+ (reg) |= EP_STS_EN_DESCMISEN; \
+ } } while (0)
+
+/**
+ * cdns3_wa2_descmiss_copy_data copy data from internal requests to
+ * request queued by class driver.
+ * @priv_ep: extended endpoint object
+ * @request: request object
+ */
+static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
+ struct usb_request *request)
+{
+ struct usb_request *descmiss_req;
+ struct cdns3_request *descmiss_priv_req;
+
+ while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+ int chunk_end;
+ int length;
+
+ descmiss_priv_req =
+ cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+ descmiss_req = &descmiss_priv_req->request;
+
+ /* driver can't touch pending request */
+ if (descmiss_priv_req->flags & REQUEST_PENDING)
+ break;
+
+ chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH;
+ length = request->actual + descmiss_req->actual;
+
+ request->status = descmiss_req->status;
+
+ if (length <= request->length) {
+ memcpy(&((u8 *)request->buf)[request->actual],
+ descmiss_req->buf,
+ descmiss_req->actual);
+ request->actual = length;
+ } else {
+ /* It should never occures */
+ request->status = -ENOMEM;
+ }
+
+ list_del_init(&descmiss_priv_req->list);
+
+ kfree(descmiss_req->buf);
+ cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req);
+ --priv_ep->wa2_counter;
+
+ if (!chunk_end)
+ break;
+ }
+}
+
+struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep,
+ struct cdns3_request *priv_req)
+{
+ if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN &&
+ priv_req->flags & REQUEST_INTERNAL) {
+ struct usb_request *req;
+
+ req = cdns3_next_request(&priv_ep->deferred_req_list);
+
+ priv_ep->descmis_req = NULL;
+
+ if (!req)
+ return NULL;
+
+ cdns3_wa2_descmiss_copy_data(priv_ep, req);
+ if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) &&
+ req->length != req->actual) {
+ /* wait for next part of transfer */
+ return NULL;
+ }
+
+ if (req->status == -EINPROGRESS)
+ req->status = 0;
+
+ list_del_init(&req->list);
+ cdns3_start_all_request(priv_dev, priv_ep);
+ return req;
+ }
+
+ return &priv_req->request;
+}
+
+int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep,
+ struct cdns3_request *priv_req)
+{
+ int deferred = 0;
+
+ /*
+ * If transfer was queued before DESCMISS appear than we
+ * can disable handling of DESCMISS interrupt. Driver assumes that it
+ * can disable special treatment for this endpoint.
+ */
+ if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
+ u32 reg;
+
+ cdns3_select_ep(priv_dev, priv_ep->num | priv_ep->dir);
+ priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
+ reg = readl(&priv_dev->regs->ep_sts_en);
+ reg &= ~EP_STS_EN_DESCMISEN;
+ trace_cdns3_wa2(priv_ep, "workaround disabled\n");
+ writel(reg, &priv_dev->regs->ep_sts_en);
+ }
+
+ if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
+ u8 pending_empty = list_empty(&priv_ep->pending_req_list);
+ u8 descmiss_empty = list_empty(&priv_ep->wa2_descmiss_req_list);
+
+ /*
+ * DESCMISS transfer has been finished, so data will be
+ * directly copied from internal allocated usb_request
+ * objects.
+ */
+ if (pending_empty && !descmiss_empty &&
+ !(priv_req->flags & REQUEST_INTERNAL)) {
+ cdns3_wa2_descmiss_copy_data(priv_ep,
+ &priv_req->request);
+
+ trace_cdns3_wa2(priv_ep, "get internal stored data");
+
+ list_add_tail(&priv_req->request.list,
+ &priv_ep->pending_req_list);
+ cdns3_gadget_giveback(priv_ep, priv_req,
+ priv_req->request.status);
+
+ /*
+ * Intentionally driver returns positive value as
+ * correct value. It informs that transfer has
+ * been finished.
+ */
+ return EINPROGRESS;
+ }
+
+ /*
+ * Driver will wait for completion DESCMISS transfer,
+ * before starts new, not DESCMISS transfer.
+ */
+ if (!pending_empty && !descmiss_empty) {
+ trace_cdns3_wa2(priv_ep, "wait for pending transfer\n");
+ deferred = 1;
+ }
+
+ if (priv_req->flags & REQUEST_INTERNAL)
+ list_add_tail(&priv_req->list,
+ &priv_ep->wa2_descmiss_req_list);
+ }
+
+ return deferred;
+}
+
+static void cdns3_wa2_remove_old_request(struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_request *priv_req;
+
+ while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+ u8 chain;
+
+ priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+ chain = !!(priv_req->flags & REQUEST_INTERNAL_CH);
+
+ trace_cdns3_wa2(priv_ep, "removes eldest request");
+
+ kfree(priv_req->request.buf);
+ cdns3_gadget_ep_free_request(&priv_ep->endpoint,
+ &priv_req->request);
+ list_del_init(&priv_req->list);
+ --priv_ep->wa2_counter;
+
+ if (!chain)
+ break;
+ }
+}
+
+/**
+ * cdns3_wa2_descmissing_packet - handles descriptor missing event.
+ * @priv_dev: extended gadget object
+ *
+ * This function is used only for WA2. For more information see Work around 2
+ * description.
+ */
+static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_request *priv_req;
+ struct usb_request *request;
+
+ if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
+ priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
+ priv_ep->flags |= EP_QUIRK_EXTRA_BUF_EN;
+ }
+
+ trace_cdns3_wa2(priv_ep, "Description Missing detected\n");
+
+ if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS)
+ cdns3_wa2_remove_old_request(priv_ep);
+
+ request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint,
+ GFP_ATOMIC);
+ if (!request)
+ goto err;
+
+ priv_req = to_cdns3_request(request);
+ priv_req->flags |= REQUEST_INTERNAL;
+
+ /* if this field is still assigned it indicate that transfer related
+ * with this request has not been finished yet. Driver in this
+ * case simply allocate next request and assign flag REQUEST_INTERNAL_CH
+ * flag to previous one. It will indicate that current request is
+ * part of the previous one.
+ */
+ if (priv_ep->descmis_req)
+ priv_ep->descmis_req->flags |= REQUEST_INTERNAL_CH;
+
+ priv_req->request.buf = kzalloc(CDNS3_DESCMIS_BUF_SIZE,
+ GFP_ATOMIC);
+ priv_ep->wa2_counter++;
+
+ if (!priv_req->request.buf) {
+ cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
+ goto err;
+ }
+
+ priv_req->request.length = CDNS3_DESCMIS_BUF_SIZE;
+ priv_ep->descmis_req = priv_req;
+
+ __cdns3_gadget_ep_queue(&priv_ep->endpoint,
+ &priv_ep->descmis_req->request,
+ GFP_ATOMIC);
+
+ return;
+
+err:
+ dev_err(priv_ep->cdns3_dev->dev,
+ "Failed: No sufficient memory for DESCMIS\n");
+}
+
+/**
+ * cdns3_gadget_giveback - call struct usb_request's ->complete callback
+ * @priv_ep: The endpoint to whom the request belongs to
+ * @priv_req: The request we're giving back
+ * @status: completion code for the request
+ *
+ * Must be called with controller's lock held and interrupts disabled. This
+ * function will unmap @req and call its ->complete() callback to notify upper
+ * layers that it has completed.
+ */
+void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
+ struct cdns3_request *priv_req,
+ int status)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ struct usb_request *request = &priv_req->request;
+
+ list_del_init(&request->list);
+
+ if (request->status == -EINPROGRESS)
+ request->status = status;
+
+ usb_gadget_unmap_request_by_dev(priv_dev->sysdev, request,
+ priv_ep->dir);
+
+ if ((priv_req->flags & REQUEST_UNALIGNED) &&
+ priv_ep->dir == USB_DIR_OUT && !request->status)
+ memcpy(request->buf, priv_req->aligned_buf->buf,
+ request->length);
+
+ priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED);
+ trace_cdns3_gadget_giveback(priv_req);
+
+ if (priv_dev->dev_ver < DEV_VER_V2) {
+ request = cdns3_wa2_gadget_giveback(priv_dev, priv_ep,
+ priv_req);
+ if (!request)
+ return;
+ }
+
+ if (request->complete) {
+ spin_unlock(&priv_dev->lock);
+ usb_gadget_giveback_request(&priv_ep->endpoint,
+ request);
+ spin_lock(&priv_dev->lock);
+ }
+
+ if (request->buf == priv_dev->zlp_buf)
+ cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
+}
+
+void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
+{
+ /* Work around for stale data address in TRB*/
+ if (priv_ep->wa1_set) {
+ trace_cdns3_wa1(priv_ep, "restore cycle bit");
+
+ priv_ep->wa1_set = 0;
+ priv_ep->wa1_trb_index = 0xFFFF;
+ if (priv_ep->wa1_cycle_bit) {
+ priv_ep->wa1_trb->control =
+ priv_ep->wa1_trb->control | 0x1;
+ } else {
+ priv_ep->wa1_trb->control =
+ priv_ep->wa1_trb->control & ~0x1;
+ }
+ }
+}
+
+static void cdns3_free_aligned_request_buf(struct work_struct *work)
+{
+ struct cdns3_device *priv_dev = container_of(work, struct cdns3_device,
+ aligned_buf_wq);
+ struct cdns3_aligned_buf *buf, *tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+
+ list_for_each_entry_safe(buf, tmp, &priv_dev->aligned_buf_list, list) {
+ if (!buf->in_use) {
+ list_del(&buf->list);
+
+ /*
+ * Re-enable interrupts to free DMA capable memory.
+ * Driver can't free this memory with disabled
+ * interrupts.
+ */
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ dma_free_coherent(priv_dev->sysdev, buf->size,
+ buf->buf, buf->dma);
+ kfree(buf);
+ spin_lock_irqsave(&priv_dev->lock, flags);
+ }
+ }
+
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+}
+
+static int cdns3_prepare_aligned_request_buf(struct cdns3_request *priv_req)
+{
+ struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ struct cdns3_aligned_buf *buf;
+
+ /* check if buffer is aligned to 8. */
+ if (!((uintptr_t)priv_req->request.buf & 0x7))
+ return 0;
+
+ buf = priv_req->aligned_buf;
+
+ if (!buf || priv_req->request.length > buf->size) {
+ buf = kzalloc(sizeof(*buf), GFP_ATOMIC);
+ if (!buf)
+ return -ENOMEM;
+
+ buf->size = priv_req->request.length;
+
+ buf->buf = dma_alloc_coherent(priv_dev->sysdev,
+ buf->size,
+ &buf->dma,
+ GFP_ATOMIC);
+ if (!buf->buf) {
+ kfree(buf);
+ return -ENOMEM;
+ }
+
+ if (priv_req->aligned_buf) {
+ trace_cdns3_free_aligned_request(priv_req);
+ priv_req->aligned_buf->in_use = 0;
+ queue_work(system_freezable_wq,
+ &priv_dev->aligned_buf_wq);
+ }
+
+ buf->in_use = 1;
+ priv_req->aligned_buf = buf;
+
+ list_add_tail(&buf->list,
+ &priv_dev->aligned_buf_list);
+ }
+
+ if (priv_ep->dir == USB_DIR_IN) {
+ memcpy(buf->buf, priv_req->request.buf,
+ priv_req->request.length);
+ }
+
+ priv_req->flags |= REQUEST_UNALIGNED;
+ trace_cdns3_prepare_aligned_request(priv_req);
+
+ return 0;
+}
+
+static int cdns3_wa1_update_guard(struct cdns3_endpoint *priv_ep,
+ struct cdns3_trb *trb)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+ if (!priv_ep->wa1_set) {
+ u32 doorbell;
+
+ doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+
+ if (doorbell) {
+ priv_ep->wa1_cycle_bit = priv_ep->pcs ? TRB_CYCLE : 0;
+ priv_ep->wa1_set = 1;
+ priv_ep->wa1_trb = trb;
+ priv_ep->wa1_trb_index = priv_ep->enqueue;
+ trace_cdns3_wa1(priv_ep, "set guard");
+ return 0;
+ }
+ }
+ return 1;
+}
+
+static void cdns3_wa1_tray_restore_cycle_bit(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep)
+{
+ int dma_index;
+ u32 doorbell;
+
+ doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+ dma_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+
+ if (!doorbell || dma_index != priv_ep->wa1_trb_index)
+ cdns3_wa1_restore_cycle_bit(priv_ep);
+}
+
+/**
+ * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware
+ * @priv_ep: endpoint object
+ *
+ * Returns zero on success or negative value on failure
+ */
+int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
+ struct usb_request *request)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ struct cdns3_request *priv_req;
+ struct cdns3_trb *trb;
+ dma_addr_t trb_dma;
+ u32 togle_pcs = 1;
+ int sg_iter = 0;
+ int num_trb;
+ int address;
+ u32 control;
+ int pcs;
+
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
+ num_trb = priv_ep->interval;
+ else
+ num_trb = request->num_sgs ? request->num_sgs : 1;
+
+ if (num_trb > priv_ep->free_trbs) {
+ priv_ep->flags |= EP_RING_FULL;
+ return -ENOBUFS;
+ }
+
+ priv_req = to_cdns3_request(request);
+ address = priv_ep->endpoint.desc->bEndpointAddress;
+
+ priv_ep->flags |= EP_PENDING_REQUEST;
+
+ /* must allocate buffer aligned to 8 */
+ if (priv_req->flags & REQUEST_UNALIGNED)
+ trb_dma = priv_req->aligned_buf->dma;
+ else
+ trb_dma = request->dma;
+
+ trb = priv_ep->trb_pool + priv_ep->enqueue;
+ priv_req->start_trb = priv_ep->enqueue;
+ priv_req->trb = trb;
+
+ cdns3_select_ep(priv_ep->cdns3_dev, address);
+
+ /* prepare ring */
+ if ((priv_ep->enqueue + num_trb) >= (priv_ep->num_trbs - 1)) {
+ struct cdns3_trb *link_trb;
+ int doorbell, dma_index;
+ u32 ch_bit = 0;
+
+ doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+ dma_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+
+ /* Driver can't update LINK TRB if it is current processed. */
+ if (doorbell && dma_index == priv_ep->num_trbs - 1) {
+ priv_ep->flags |= EP_DEFERRED_DRDY;
+ return -ENOBUFS;
+ }
+
+ /*updating C bt in Link TRB before starting DMA*/
+ link_trb = priv_ep->trb_pool + (priv_ep->num_trbs - 1);
+ /*
+ * For TRs size equal 2 enabling TRB_CHAIN for epXin causes
+ * that DMA stuck at the LINK TRB.
+ * On the other hand, removing TRB_CHAIN for longer TRs for
+ * epXout cause that DMA stuck after handling LINK TRB.
+ * To eliminate this strange behavioral driver set TRB_CHAIN
+ * bit only for TR size > 2.
+ */
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC ||
+ TRBS_PER_SEGMENT > 2)
+ ch_bit = TRB_CHAIN;
+
+ link_trb->control = ((priv_ep->pcs) ? TRB_CYCLE : 0) |
+ TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit;
+ }
+
+ if (priv_dev->dev_ver <= DEV_VER_V2)
+ togle_pcs = cdns3_wa1_update_guard(priv_ep, trb);
+
+ /* set incorrect Cycle Bit for first trb*/
+ control = priv_ep->pcs ? 0 : TRB_CYCLE;
+
+ do {
+ u32 length;
+ u16 td_size = 0;
+
+ /* fill TRB */
+ control |= TRB_TYPE(TRB_NORMAL);
+ trb->buffer = TRB_BUFFER(request->num_sgs == 0
+ ? trb_dma : request->sg[sg_iter].dma_address);
+
+ if (likely(!request->num_sgs))
+ length = request->length;
+ else
+ length = request->sg[sg_iter].length;
+
+ if (likely(priv_dev->dev_ver >= DEV_VER_V2))
+ td_size = DIV_ROUND_UP(length,
+ priv_ep->endpoint.maxpacket);
+
+ trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) |
+ TRB_LEN(length);
+ if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+ trb->length |= TRB_TDL_SS_SIZE(td_size);
+ else
+ control |= TRB_TDL_HS_SIZE(td_size);
+
+ pcs = priv_ep->pcs ? TRB_CYCLE : 0;
+
+ /*
+ * first trb should be prepared as last to avoid processing
+ * transfer to early
+ */
+ if (sg_iter != 0)
+ control |= pcs;
+
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) {
+ control |= TRB_IOC | TRB_ISP;
+ } else {
+ /* for last element in TD or in SG list */
+ if (sg_iter == (num_trb - 1) && sg_iter != 0)
+ control |= pcs | TRB_IOC | TRB_ISP;
+ }
+
+ if (sg_iter)
+ trb->control = control;
+ else
+ priv_req->trb->control = control;
+
+ control = 0;
+ ++sg_iter;
+ priv_req->end_trb = priv_ep->enqueue;
+ cdns3_ep_inc_enq(priv_ep);
+ trb = priv_ep->trb_pool + priv_ep->enqueue;
+ } while (sg_iter < num_trb);
+
+ trb = priv_req->trb;
+
+ priv_req->flags |= REQUEST_PENDING;
+
+ if (sg_iter == 1)
+ trb->control |= TRB_IOC | TRB_ISP;
+
+ /*
+ * Memory barrier - cycle bit must be set before other filds in trb.
+ */
+ wmb();
+
+ /* give the TD to the consumer*/
+ if (togle_pcs)
+ trb->control = trb->control ^ 1;
+
+ if (priv_dev->dev_ver <= DEV_VER_V2)
+ cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep);
+
+ trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
+
+ /*
+ * Memory barrier - Cycle Bit must be set before trb->length and
+ * trb->buffer fields.
+ */
+ wmb();
+
+ /*
+ * For DMULT mode we can set address to transfer ring only once after
+ * enabling endpoint.
+ */
+ if (priv_ep->flags & EP_UPDATE_EP_TRBADDR) {
+ /*
+ * Until SW is not ready to handle the OUT transfer the ISO OUT
+ * Endpoint should be disabled (EP_CFG.ENABLE = 0).
+ * EP_CFG_ENABLE must be set before updating ep_traddr.
+ */
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir &&
+ !(priv_ep->flags & EP_QUIRK_ISO_OUT_EN)) {
+ priv_ep->flags |= EP_QUIRK_ISO_OUT_EN;
+ cdns3_set_register_bit(&priv_dev->regs->ep_cfg,
+ EP_CFG_ENABLE);
+ }
+
+ writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma +
+ priv_req->start_trb * TRB_SIZE),
+ &priv_dev->regs->ep_traddr);
+
+ priv_ep->flags &= ~EP_UPDATE_EP_TRBADDR;
+ }
+
+ if (!priv_ep->wa1_set && !(priv_ep->flags & EP_STALLED)) {
+ trace_cdns3_ring(priv_ep);
+ /*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+ writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
+ writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+ trace_cdns3_doorbell_epx(priv_ep->name,
+ readl(&priv_dev->regs->ep_traddr));
+ }
+
+ /* WORKAROUND for transition to L0 */
+ __cdns3_gadget_wakeup(priv_dev);
+
+ return 0;
+}
+
+void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
+{
+ struct cdns3_endpoint *priv_ep;
+ struct usb_ep *ep;
+ int val;
+
+ if (priv_dev->hw_configured_flag)
+ return;
+
+ writel(USB_CONF_CFGSET, &priv_dev->regs->usb_conf);
+ writel(EP_CMD_ERDY | EP_CMD_REQ_CMPL, &priv_dev->regs->ep_cmd);
+
+ cdns3_set_register_bit(&priv_dev->regs->usb_conf,
+ USB_CONF_U1EN | USB_CONF_U2EN);
+
+ /* wait until configuration set */
+ readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val,
+ val & USB_STS_CFGSTS_MASK, 1, 100);
+
+ priv_dev->hw_configured_flag = 1;
+
+ list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+ if (ep->enabled) {
+ priv_ep = ep_to_cdns3_ep(ep);
+ cdns3_start_all_request(priv_dev, priv_ep);
+ }
+ }
+}
+
+/**
+ * cdns3_request_handled - check whether request has been handled by DMA
+ *
+ * @priv_ep: extended endpoint object.
+ * @priv_req: request object for checking
+ *
+ * Endpoint must be selected before invoking this function.
+ *
+ * Returns false if request has not been handled by DMA, else returns true.
+ *
+ * SR - start ring
+ * ER - end ring
+ * DQ = priv_ep->dequeue - dequeue position
+ * EQ = priv_ep->enqueue - enqueue position
+ * ST = priv_req->start_trb - index of first TRB in transfer ring
+ * ET = priv_req->end_trb - index of last TRB in transfer ring
+ * CI = current_index - index of processed TRB by DMA.
+ *
+ * As first step, function checks if cycle bit for priv_req->start_trb is
+ * correct.
+ *
+ * some rules:
+ * 1. priv_ep->dequeue never exceed current_index.
+ * 2 priv_ep->enqueue never exceed priv_ep->dequeue
+ * 3. exception: priv_ep->enqueue == priv_ep->dequeue
+ * and priv_ep->free_trbs is zero.
+ * This case indicate that TR is full.
+ *
+ * Then We can split recognition into two parts:
+ * Case 1 - priv_ep->dequeue < current_index
+ * SR ... EQ ... DQ ... CI ... ER
+ * SR ... DQ ... CI ... EQ ... ER
+ *
+ * Request has been handled by DMA if ST and ET is between DQ and CI.
+ *
+ * Case 2 - priv_ep->dequeue > current_index
+ * This situation take place when CI go through the LINK TRB at the end of
+ * transfer ring.
+ * SR ... CI ... EQ ... DQ ... ER
+ *
+ * Request has been handled by DMA if ET is less then CI or
+ * ET is greater or equal DQ.
+ */
+static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
+ struct cdns3_request *priv_req)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ struct cdns3_trb *trb = priv_req->trb;
+ int current_index = 0;
+ int handled = 0;
+ int doorbell;
+
+ current_index = cdns3_get_dma_pos(priv_dev, priv_ep);
+ doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
+
+ trb = &priv_ep->trb_pool[priv_req->start_trb];
+
+ if ((trb->control & TRB_CYCLE) != priv_ep->ccs)
+ goto finish;
+
+ if (doorbell == 1 && current_index == priv_ep->dequeue)
+ goto finish;
+
+ /* The corner case for TRBS_PER_SEGMENT equal 2). */
+ if (TRBS_PER_SEGMENT == 2 && priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+ handled = 1;
+ goto finish;
+ }
+
+ if (priv_ep->enqueue == priv_ep->dequeue &&
+ priv_ep->free_trbs == 0) {
+ handled = 1;
+ } else if (priv_ep->dequeue < current_index) {
+ if ((current_index == (priv_ep->num_trbs - 1)) &&
+ !priv_ep->dequeue)
+ goto finish;
+
+ if (priv_req->end_trb >= priv_ep->dequeue &&
+ priv_req->end_trb < current_index)
+ handled = 1;
+ } else if (priv_ep->dequeue > current_index) {
+ if (priv_req->end_trb < current_index ||
+ priv_req->end_trb >= priv_ep->dequeue)
+ handled = 1;
+ }
+
+finish:
+ trace_cdns3_request_handled(priv_req, current_index, handled);
+
+ return handled;
+}
+
+static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_request *priv_req;
+ struct usb_request *request;
+ struct cdns3_trb *trb;
+
+ while (!list_empty(&priv_ep->pending_req_list)) {
+ request = cdns3_next_request(&priv_ep->pending_req_list);
+ priv_req = to_cdns3_request(request);
+
+ /* Re-select endpoint. It could be changed by other CPU during
+ * handling usb_gadget_giveback_request.
+ */
+ cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
+
+ if (!cdns3_request_handled(priv_ep, priv_req))
+ goto prepare_next_td;
+
+ trb = priv_ep->trb_pool + priv_ep->dequeue;
+ trace_cdns3_complete_trb(priv_ep, trb);
+
+ if (trb != priv_req->trb)
+ dev_warn(priv_dev->dev,
+ "request_trb=0x%p, queue_trb=0x%p\n",
+ priv_req->trb, trb);
+
+ request->actual = TRB_LEN(le32_to_cpu(trb->length));
+ cdns3_move_deq_to_next_trb(priv_req);
+ cdns3_gadget_giveback(priv_ep, priv_req, 0);
+
+ if (priv_ep->type != USB_ENDPOINT_XFER_ISOC &&
+ TRBS_PER_SEGMENT == 2)
+ break;
+ }
+ priv_ep->flags &= ~EP_PENDING_REQUEST;
+
+prepare_next_td:
+ if (!(priv_ep->flags & EP_STALLED) &&
+ !(priv_ep->flags & EP_STALL_PENDING))
+ cdns3_start_all_request(priv_dev, priv_ep);
+}
+
+void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+ cdns3_wa1_restore_cycle_bit(priv_ep);
+
+ if (rearm) {
+ trace_cdns3_ring(priv_ep);
+
+ /* Cycle Bit must be updated before arming DMA. */
+ wmb();
+ writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
+
+ __cdns3_gadget_wakeup(priv_dev);
+
+ trace_cdns3_doorbell_epx(priv_ep->name,
+ readl(&priv_dev->regs->ep_traddr));
+ }
+}
+
+/**
+ * cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint
+ * @priv_ep: endpoint object
+ *
+ * Returns 0
+ */
+static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ u32 ep_sts_reg;
+
+ cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
+
+ trace_cdns3_epx_irq(priv_dev, priv_ep);
+
+ ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+ writel(ep_sts_reg, &priv_dev->regs->ep_sts);
+
+ if (ep_sts_reg & EP_STS_TRBERR) {
+ if (priv_ep->flags & EP_STALL_PENDING &&
+ !(ep_sts_reg & EP_STS_DESCMIS &&
+ priv_dev->dev_ver < DEV_VER_V2)) {
+ cdns3_ep_stall_flush(priv_ep);
+ }
+
+ /*
+ * For isochronous transfer driver completes request on
+ * IOC or on TRBERR. IOC appears only when device receive
+ * OUT data packet. If host disable stream or lost some packet
+ * then the only way to finish all queued transfer is to do it
+ * on TRBERR event.
+ */
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC &&
+ !priv_ep->wa1_set) {
+ if (!priv_ep->dir) {
+ u32 ep_cfg = readl(&priv_dev->regs->ep_cfg);
+
+ ep_cfg &= ~EP_CFG_ENABLE;
+ writel(ep_cfg, &priv_dev->regs->ep_cfg);
+ priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN;
+ }
+ cdns3_transfer_completed(priv_dev, priv_ep);
+ } else if (!(priv_ep->flags & EP_STALLED) &&
+ !(priv_ep->flags & EP_STALL_PENDING)) {
+ if (priv_ep->flags & EP_DEFERRED_DRDY) {
+ priv_ep->flags &= ~EP_DEFERRED_DRDY;
+ cdns3_start_all_request(priv_dev, priv_ep);
+ } else {
+ cdns3_rearm_transfer(priv_ep,
+ priv_ep->wa1_set);
+ }
+ }
+ }
+
+ if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
+ if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
+ if (ep_sts_reg & EP_STS_ISP)
+ priv_ep->flags |= EP_QUIRK_END_TRANSFER;
+ else
+ priv_ep->flags &= ~EP_QUIRK_END_TRANSFER;
+ }
+
+ cdns3_transfer_completed(priv_dev, priv_ep);
+ }
+
+ /*
+ * WA2: this condition should only be meet when
+ * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or
+ * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN.
+ * In other cases this interrupt will be disabled/
+ */
+ if (ep_sts_reg & EP_STS_DESCMIS && priv_dev->dev_ver < DEV_VER_V2 &&
+ !(priv_ep->flags & EP_STALLED))
+ cdns3_wa2_descmissing_packet(priv_ep);
+
+ return 0;
+}
+
+static void cdns3_disconnect_gadget(struct cdns3_device *priv_dev)
+{
+ if (priv_dev->gadget_driver && priv_dev->gadget_driver->disconnect) {
+ spin_unlock(&priv_dev->lock);
+ priv_dev->gadget_driver->disconnect(&priv_dev->gadget);
+ spin_lock(&priv_dev->lock);
+ }
+}
+
+/**
+ * cdns3_check_usb_interrupt_proceed - Processes interrupt related to device
+ * @priv_dev: extended gadget object
+ * @usb_ists: bitmap representation of device's reported interrupts
+ * (usb_ists register value)
+ */
+static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
+ u32 usb_ists)
+{
+ int speed = 0;
+
+ trace_cdns3_usb_irq(priv_dev, usb_ists);
+ if (usb_ists & USB_ISTS_L1ENTI) {
+ /*
+ * WORKAROUND: CDNS3 controller has issue with hardware resuming
+ * from L1. To fix it, if any DMA transfer is pending driver
+ * must starts driving resume signal immediately.
+ */
+ if (readl(&priv_dev->regs->drbl))
+ __cdns3_gadget_wakeup(priv_dev);
+ }
+
+ /* Connection detected */
+ if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
+ speed = cdns3_get_speed(priv_dev);
+ priv_dev->gadget.speed = speed;
+ usb_gadget_set_state(&priv_dev->gadget, USB_STATE_POWERED);
+ cdns3_ep0_config(priv_dev);
+ }
+
+ /* Disconnection detected */
+ if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) {
+ cdns3_disconnect_gadget(priv_dev);
+ priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+ usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
+ cdns3_hw_reset_eps_config(priv_dev);
+ }
+
+ if (usb_ists & (USB_ISTS_L2ENTI | USB_ISTS_U3ENTI)) {
+ if (priv_dev->gadget_driver &&
+ priv_dev->gadget_driver->suspend) {
+ spin_unlock(&priv_dev->lock);
+ priv_dev->gadget_driver->suspend(&priv_dev->gadget);
+ spin_lock(&priv_dev->lock);
+ }
+ }
+
+ if (usb_ists & (USB_ISTS_L2EXTI | USB_ISTS_U3EXTI)) {
+ if (priv_dev->gadget_driver &&
+ priv_dev->gadget_driver->resume) {
+ spin_unlock(&priv_dev->lock);
+ priv_dev->gadget_driver->resume(&priv_dev->gadget);
+ spin_lock(&priv_dev->lock);
+ }
+ }
+
+ /* reset*/
+ if (usb_ists & (USB_ISTS_UWRESI | USB_ISTS_UHRESI | USB_ISTS_U2RESI)) {
+ if (priv_dev->gadget_driver) {
+ spin_unlock(&priv_dev->lock);
+ usb_gadget_udc_reset(&priv_dev->gadget,
+ priv_dev->gadget_driver);
+ spin_lock(&priv_dev->lock);
+
+ /*read again to check the actual speed*/
+ speed = cdns3_get_speed(priv_dev);
+ priv_dev->gadget.speed = speed;
+ cdns3_hw_reset_eps_config(priv_dev);
+ cdns3_ep0_config(priv_dev);
+ }
+ }
+}
+
+/**
+ * cdns3_device_irq_handler- interrupt handler for device part of controller
+ *
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
+{
+ struct cdns3_device *priv_dev;
+ struct cdns3 *cdns = data;
+ irqreturn_t ret = IRQ_NONE;
+ u32 reg;
+
+ priv_dev = cdns->gadget_dev;
+
+ /* check USB device interrupt */
+ reg = readl(&priv_dev->regs->usb_ists);
+ if (reg) {
+ /* After masking interrupts the new interrupts won't be
+ * reported in usb_ists/ep_ists. In order to not lose some
+ * of them driver disables only detected interrupts.
+ * They will be enabled ASAP after clearing source of
+ * interrupt. This an unusual behavior only applies to
+ * usb_ists register.
+ */
+ reg = ~reg & readl(&priv_dev->regs->usb_ien);
+ /* mask deferred interrupt. */
+ writel(reg, &priv_dev->regs->usb_ien);
+ ret = IRQ_WAKE_THREAD;
+ }
+
+ /* check endpoint interrupt */
+ reg = readl(&priv_dev->regs->ep_ists);
+ if (reg) {
+ writel(0, &priv_dev->regs->ep_ien);
+ ret = IRQ_WAKE_THREAD;
+ }
+
+ return ret;
+}
+
+/**
+ * cdns3_device_thread_irq_handler- interrupt handler for device part
+ * of controller
+ *
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data)
+{
+ struct cdns3_device *priv_dev;
+ struct cdns3 *cdns = data;
+ irqreturn_t ret = IRQ_NONE;
+ unsigned long flags;
+ int bit;
+ u32 reg;
+
+ priv_dev = cdns->gadget_dev;
+ spin_lock_irqsave(&priv_dev->lock, flags);
+
+ reg = readl(&priv_dev->regs->usb_ists);
+ if (reg) {
+ writel(reg, &priv_dev->regs->usb_ists);
+ writel(USB_IEN_INIT, &priv_dev->regs->usb_ien);
+ cdns3_check_usb_interrupt_proceed(priv_dev, reg);
+ ret = IRQ_HANDLED;
+ }
+
+ reg = readl(&priv_dev->regs->ep_ists);
+
+ /* handle default endpoint OUT */
+ if (reg & EP_ISTS_EP_OUT0) {
+ cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_OUT);
+ ret = IRQ_HANDLED;
+ }
+
+ /* handle default endpoint IN */
+ if (reg & EP_ISTS_EP_IN0) {
+ cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_IN);
+ ret = IRQ_HANDLED;
+ }
+
+ /* check if interrupt from non default endpoint, if no exit */
+ reg &= ~(EP_ISTS_EP_OUT0 | EP_ISTS_EP_IN0);
+ if (!reg)
+ goto irqend;
+
+ for_each_set_bit(bit, (unsigned long *)&reg,
+ sizeof(u32) * BITS_PER_BYTE) {
+ cdns3_check_ep_interrupt_proceed(priv_dev->eps[bit]);
+ ret = IRQ_HANDLED;
+ }
+
+irqend:
+ writel(~0, &priv_dev->regs->ep_ien);
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+ return ret;
+}
+
+/**
+ * cdns3_ep_onchip_buffer_reserve - Try to reserve onchip buf for EP
+ *
+ * The real reservation will occur during write to EP_CFG register,
+ * this function is used to check if the 'size' reservation is allowed.
+ *
+ * @priv_dev: extended gadget object
+ * @size: the size (KB) for EP would like to allocate
+ * @is_in: endpoint direction
+ *
+ * Return 0 if the required size can met or negative value on failure
+ */
+static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev,
+ int size, int is_in)
+{
+ int remained;
+
+ /* 2KB are reserved for EP0*/
+ remained = priv_dev->onchip_buffers - priv_dev->onchip_used_size - 2;
+
+ if (is_in) {
+ if (remained < size)
+ return -EPERM;
+
+ priv_dev->onchip_used_size += size;
+ } else {
+ int required;
+
+ /**
+ * ALL OUT EPs are shared the same chunk onchip memory, so
+ * driver checks if it already has assigned enough buffers
+ */
+ if (priv_dev->out_mem_is_allocated >= size)
+ return 0;
+
+ required = size - priv_dev->out_mem_is_allocated;
+
+ if (required > remained)
+ return -EPERM;
+
+ priv_dev->out_mem_is_allocated += required;
+ priv_dev->onchip_used_size += required;
+ }
+
+ return 0;
+}
+
+void cdns3_configure_dmult(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+
+ /* For dev_ver > DEV_VER_V2 DMULT is configured per endpoint */
+ if (priv_dev->dev_ver <= DEV_VER_V2)
+ writel(USB_CONF_DMULT, &regs->usb_conf);
+
+ if (priv_dev->dev_ver == DEV_VER_V2)
+ writel(USB_CONF2_EN_TDL_TRB, &regs->usb_conf2);
+
+ if (priv_dev->dev_ver >= DEV_VER_V3 && priv_ep) {
+ u32 mask;
+
+ if (priv_ep->dir)
+ mask = BIT(priv_ep->num + 16);
+ else
+ mask = BIT(priv_ep->num);
+
+ if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+ cdns3_set_register_bit(&regs->tdl_from_trb, mask);
+ cdns3_set_register_bit(&regs->tdl_beh, mask);
+ cdns3_set_register_bit(&regs->tdl_beh2, mask);
+ cdns3_set_register_bit(&regs->dma_adv_td, mask);
+ }
+
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir)
+ cdns3_set_register_bit(&regs->tdl_from_trb, mask);
+
+ cdns3_set_register_bit(&regs->dtrans, mask);
+ }
+}
+
+/**
+ * cdns3_ep_config Configure hardware endpoint
+ * @priv_ep: extended endpoint object
+ */
+void cdns3_ep_config(struct cdns3_endpoint *priv_ep)
+{
+ bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC);
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ u32 bEndpointAddress = priv_ep->num | priv_ep->dir;
+ u32 max_packet_size = 0;
+ u8 maxburst = 0;
+ u32 ep_cfg = 0;
+ u8 buffering;
+ u8 mult = 0;
+ int ret;
+
+ buffering = CDNS3_EP_BUF_SIZE - 1;
+
+ cdns3_configure_dmult(priv_dev, priv_ep);
+
+ switch (priv_ep->type) {
+ case USB_ENDPOINT_XFER_INT:
+ ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
+
+ if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
+ priv_dev->dev_ver > DEV_VER_V2)
+ ep_cfg |= EP_CFG_TDL_CHK;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
+
+ if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
+ priv_dev->dev_ver > DEV_VER_V2)
+ ep_cfg |= EP_CFG_TDL_CHK;
+ break;
+ default:
+ ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC);
+ mult = CDNS3_EP_ISO_HS_MULT - 1;
+ buffering = mult + 1;
+ }
+
+ switch (priv_dev->gadget.speed) {
+ case USB_SPEED_FULL:
+ max_packet_size = is_iso_ep ? 1023 : 64;
+ break;
+ case USB_SPEED_HIGH:
+ max_packet_size = is_iso_ep ? 1024 : 512;
+ break;
+ case USB_SPEED_SUPER:
+ /* It's limitation that driver assumes in driver. */
+ mult = 0;
+ max_packet_size = 1024;
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
+ maxburst = CDNS3_EP_ISO_SS_BURST - 1;
+ buffering = (mult + 1) *
+ (maxburst + 1);
+
+ if (priv_ep->interval > 1)
+ buffering++;
+ } else {
+ maxburst = CDNS3_EP_BUF_SIZE - 1;
+ }
+ break;
+ default:
+ /* all other speed are not supported */
+ return;
+ }
+
+ if (max_packet_size == 1024)
+ priv_ep->trb_burst_size = 128;
+ else if (max_packet_size >= 512)
+ priv_ep->trb_burst_size = 64;
+ else
+ priv_ep->trb_burst_size = 16;
+
+ ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1,
+ !!priv_ep->dir);
+ if (ret) {
+ dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n");
+ return;
+ }
+
+ ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) |
+ EP_CFG_MULT(mult) |
+ EP_CFG_BUFFERING(buffering) |
+ EP_CFG_MAXBURST(maxburst);
+
+ cdns3_select_ep(priv_dev, bEndpointAddress);
+ writel(ep_cfg, &priv_dev->regs->ep_cfg);
+
+ dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n",
+ priv_ep->name, ep_cfg);
+}
+
+/* Find correct direction for HW endpoint according to description */
+static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc,
+ struct cdns3_endpoint *priv_ep)
+{
+ return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) ||
+ (priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc));
+}
+
+static struct
+cdns3_endpoint *cdns3_find_available_ep(struct cdns3_device *priv_dev,
+ struct usb_endpoint_descriptor *desc)
+{
+ struct usb_ep *ep;
+ struct cdns3_endpoint *priv_ep;
+
+ list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+ unsigned long num;
+ int ret;
+ /* ep name pattern likes epXin or epXout */
+ char c[2] = {ep->name[2], '\0'};
+
+ ret = kstrtoul(c, 10, &num);
+ if (ret)
+ return ERR_PTR(ret);
+
+ priv_ep = ep_to_cdns3_ep(ep);
+ if (cdns3_ep_dir_is_correct(desc, priv_ep)) {
+ if (!(priv_ep->flags & EP_CLAIMED)) {
+ priv_ep->num = num;
+ return priv_ep;
+ }
+ }
+ }
+
+ return ERR_PTR(-ENOENT);
+}
+
+/*
+ * Cadence IP has one limitation that all endpoints must be configured
+ * (Type & MaxPacketSize) before setting configuration through hardware
+ * register, it means we can't change endpoints configuration after
+ * set_configuration.
+ *
+ * This function set EP_CLAIMED flag which is added when the gadget driver
+ * uses usb_ep_autoconfig to configure specific endpoint;
+ * When the udc driver receives set_configurion request,
+ * it goes through all claimed endpoints, and configure all endpoints
+ * accordingly.
+ *
+ * At usb_ep_ops.enable/disable, we only enable and disable endpoint through
+ * ep_cfg register which can be changed after set_configuration, and do
+ * some software operation accordingly.
+ */
+static struct
+usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *comp_desc)
+{
+ struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+ struct cdns3_endpoint *priv_ep;
+ unsigned long flags;
+
+ priv_ep = cdns3_find_available_ep(priv_dev, desc);
+ if (IS_ERR(priv_ep)) {
+ dev_err(priv_dev->dev, "no available ep\n");
+ return NULL;
+ }
+
+ dev_dbg(priv_dev->dev, "match endpoint: %s\n", priv_ep->name);
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+ priv_ep->endpoint.desc = desc;
+ priv_ep->dir = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT;
+ priv_ep->type = usb_endpoint_type(desc);
+ priv_ep->flags |= EP_CLAIMED;
+ priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
+
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ return &priv_ep->endpoint;
+}
+
+/**
+ * cdns3_gadget_ep_alloc_request Allocates request
+ * @ep: endpoint object associated with request
+ * @gfp_flags: gfp flags
+ *
+ * Returns allocated request address, NULL on allocation error
+ */
+struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
+ gfp_t gfp_flags)
+{
+ struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+ struct cdns3_request *priv_req;
+
+ priv_req = kzalloc(sizeof(*priv_req), gfp_flags);
+ if (!priv_req)
+ return NULL;
+
+ priv_req->priv_ep = priv_ep;
+
+ trace_cdns3_alloc_request(priv_req);
+ return &priv_req->request;
+}
+
+/**
+ * cdns3_gadget_ep_free_request Free memory occupied by request
+ * @ep: endpoint object associated with request
+ * @request: request to free memory
+ */
+void cdns3_gadget_ep_free_request(struct usb_ep *ep,
+ struct usb_request *request)
+{
+ struct cdns3_request *priv_req = to_cdns3_request(request);
+
+ if (priv_req->aligned_buf)
+ priv_req->aligned_buf->in_use = 0;
+
+ trace_cdns3_free_request(priv_req);
+ kfree(priv_req);
+}
+
+/**
+ * cdns3_gadget_ep_enable Enable endpoint
+ * @ep: endpoint object
+ * @desc: endpoint descriptor
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep_enable(struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct cdns3_endpoint *priv_ep;
+ struct cdns3_device *priv_dev;
+ u32 reg = EP_STS_EN_TRBERREN;
+ u32 bEndpointAddress;
+ unsigned long flags;
+ int enable = 1;
+ int ret;
+ int val;
+
+ priv_ep = ep_to_cdns3_ep(ep);
+ priv_dev = priv_ep->cdns3_dev;
+
+ if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+ dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
+ return -EINVAL;
+ }
+
+ if (!desc->wMaxPacketSize) {
+ dev_err(priv_dev->dev, "usbss: missing wMaxPacketSize\n");
+ return -EINVAL;
+ }
+
+ if (dev_WARN_ONCE(priv_dev->dev, priv_ep->flags & EP_ENABLED,
+ "%s is already enabled\n", priv_ep->name))
+ return 0;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+
+ priv_ep->endpoint.desc = desc;
+ priv_ep->type = usb_endpoint_type(desc);
+ priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
+
+ if (priv_ep->interval > ISO_MAX_INTERVAL &&
+ priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
+ dev_err(priv_dev->dev, "Driver is limited to %d period\n",
+ ISO_MAX_INTERVAL);
+
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ ret = cdns3_allocate_trb_pool(priv_ep);
+
+ if (ret)
+ goto exit;
+
+ bEndpointAddress = priv_ep->num | priv_ep->dir;
+ cdns3_select_ep(priv_dev, bEndpointAddress);
+
+ trace_cdns3_gadget_ep_enable(priv_ep);
+
+ writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+ ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+ !(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
+ 1, 1000);
+
+ if (unlikely(ret)) {
+ cdns3_free_trb_pool(priv_ep);
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ /* enable interrupt for selected endpoint */
+ cdns3_set_register_bit(&priv_dev->regs->ep_ien,
+ BIT(cdns3_ep_addr_to_index(bEndpointAddress)));
+
+ if (priv_dev->dev_ver < DEV_VER_V2)
+ cdns3_wa2_enable_detection(priv_dev, priv_ep, reg);
+
+ writel(reg, &priv_dev->regs->ep_sts_en);
+
+ /*
+ * For some versions of controller at some point during ISO OUT traffic
+ * DMA reads Transfer Ring for the EP which has never got doorbell.
+ * This issue was detected only on simulation, but to avoid this issue
+ * driver add protection against it. To fix it driver enable ISO OUT
+ * endpoint before setting DRBL. This special treatment of ISO OUT
+ * endpoints are recommended by controller specification.
+ */
+ if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir)
+ enable = 0;
+
+ if (enable)
+ cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_ENABLE);
+
+ ep->desc = desc;
+ priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALLED | EP_STALL_PENDING |
+ EP_QUIRK_ISO_OUT_EN | EP_QUIRK_EXTRA_BUF_EN);
+ priv_ep->flags |= EP_ENABLED | EP_UPDATE_EP_TRBADDR;
+ priv_ep->wa1_set = 0;
+ priv_ep->enqueue = 0;
+ priv_ep->dequeue = 0;
+ reg = readl(&priv_dev->regs->ep_sts);
+ priv_ep->pcs = !!EP_STS_CCS(reg);
+ priv_ep->ccs = !!EP_STS_CCS(reg);
+ /* one TRB is reserved for link TRB used in DMULT mode*/
+ priv_ep->free_trbs = priv_ep->num_trbs - 1;
+exit:
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+ return ret;
+}
+
+/**
+ * cdns3_gadget_ep_disable Disable endpoint
+ * @ep: endpoint object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_ep_disable(struct usb_ep *ep)
+{
+ struct cdns3_endpoint *priv_ep;
+ struct cdns3_request *priv_req;
+ struct cdns3_device *priv_dev;
+ struct usb_request *request;
+ unsigned long flags;
+ int ret = 0;
+ u32 ep_cfg;
+ int val;
+
+ if (!ep) {
+ pr_err("usbss: invalid parameters\n");
+ return -EINVAL;
+ }
+
+ priv_ep = ep_to_cdns3_ep(ep);
+ priv_dev = priv_ep->cdns3_dev;
+
+ if (dev_WARN_ONCE(priv_dev->dev, !(priv_ep->flags & EP_ENABLED),
+ "%s is already disabled\n", priv_ep->name))
+ return 0;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+
+ trace_cdns3_gadget_ep_disable(priv_ep);
+
+ cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+ ep_cfg = readl(&priv_dev->regs->ep_cfg);
+ ep_cfg &= ~EP_CFG_ENABLE;
+ writel(ep_cfg, &priv_dev->regs->ep_cfg);
+
+ /**
+ * Driver needs some time before resetting endpoint.
+ * It need waits for clearing DBUSY bit or for timeout expired.
+ * 10us is enough time for controller to stop transfer.
+ */
+ readl_poll_timeout_atomic(&priv_dev->regs->ep_sts, val,
+ !(val & EP_STS_DBUSY), 1, 10);
+ writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+ readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+ !(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
+ 1, 1000);
+ if (unlikely(ret))
+ dev_err(priv_dev->dev, "Timeout: %s resetting failed.\n",
+ priv_ep->name);
+
+ while (!list_empty(&priv_ep->pending_req_list)) {
+ request = cdns3_next_request(&priv_ep->pending_req_list);
+
+ cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+ -ESHUTDOWN);
+ }
+
+ while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
+ priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
+
+ kfree(priv_req->request.buf);
+ cdns3_gadget_ep_free_request(&priv_ep->endpoint,
+ &priv_req->request);
+ list_del_init(&priv_req->list);
+ --priv_ep->wa2_counter;
+ }
+
+ while (!list_empty(&priv_ep->deferred_req_list)) {
+ request = cdns3_next_request(&priv_ep->deferred_req_list);
+
+ cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
+ -ESHUTDOWN);
+ }
+
+ priv_ep->descmis_req = NULL;
+
+ ep->desc = NULL;
+ priv_ep->flags &= ~EP_ENABLED;
+
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+ return ret;
+}
+
+/**
+ * cdns3_gadget_ep_queue Transfer data on endpoint
+ * @ep: endpoint object
+ * @request: request object
+ * @gfp_flags: gfp flags
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
+ struct usb_request *request,
+ gfp_t gfp_flags)
+{
+ struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ struct cdns3_request *priv_req;
+ int ret = 0;
+
+ request->actual = 0;
+ request->status = -EINPROGRESS;
+ priv_req = to_cdns3_request(request);
+ trace_cdns3_ep_queue(priv_req);
+
+ if (priv_dev->dev_ver < DEV_VER_V2) {
+ ret = cdns3_wa2_gadget_ep_queue(priv_dev, priv_ep,
+ priv_req);
+
+ if (ret == EINPROGRESS)
+ return 0;
+ }
+
+ ret = cdns3_prepare_aligned_request_buf(priv_req);
+ if (ret < 0)
+ return ret;
+
+ ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
+ usb_endpoint_dir_in(ep->desc));
+ if (ret)
+ return ret;
+
+ list_add_tail(&request->list, &priv_ep->deferred_req_list);
+
+ /*
+ * If hardware endpoint configuration has not been set yet then
+ * just queue request in deferred list. Transfer will be started in
+ * cdns3_set_hw_configuration.
+ */
+ if (priv_dev->hw_configured_flag && !(priv_ep->flags & EP_STALLED) &&
+ !(priv_ep->flags & EP_STALL_PENDING))
+ cdns3_start_all_request(priv_dev, priv_ep);
+
+ return 0;
+}
+
+static int cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
+ gfp_t gfp_flags)
+{
+ struct usb_request *zlp_request;
+ struct cdns3_endpoint *priv_ep;
+ struct cdns3_device *priv_dev;
+ unsigned long flags;
+ int ret;
+
+ if (!request || !ep)
+ return -EINVAL;
+
+ priv_ep = ep_to_cdns3_ep(ep);
+ priv_dev = priv_ep->cdns3_dev;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+
+ ret = __cdns3_gadget_ep_queue(ep, request, gfp_flags);
+
+ if (ret == 0 && request->zero && request->length &&
+ (request->length % ep->maxpacket == 0)) {
+ struct cdns3_request *priv_req;
+
+ zlp_request = cdns3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
+ zlp_request->buf = priv_dev->zlp_buf;
+ zlp_request->length = 0;
+
+ priv_req = to_cdns3_request(zlp_request);
+ priv_req->flags |= REQUEST_ZLP;
+
+ dev_dbg(priv_dev->dev, "Queuing ZLP for endpoint: %s\n",
+ priv_ep->name);
+ ret = __cdns3_gadget_ep_queue(ep, zlp_request, gfp_flags);
+ }
+
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ return ret;
+}
+
+/**
+ * cdns3_gadget_ep_dequeue Remove request from transfer queue
+ * @ep: endpoint object associated with request
+ * @request: request object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
+ struct usb_request *request)
+{
+ struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ struct usb_request *req, *req_temp;
+ struct cdns3_request *priv_req;
+ struct cdns3_trb *link_trb;
+ unsigned long flags;
+ int ret = 0;
+
+ if (!ep || !request || !ep->desc)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+
+ priv_req = to_cdns3_request(request);
+
+ trace_cdns3_ep_dequeue(priv_req);
+
+ cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+ list_for_each_entry_safe(req, req_temp, &priv_ep->pending_req_list,
+ list) {
+ if (request == req)
+ goto found;
+ }
+
+ list_for_each_entry_safe(req, req_temp, &priv_ep->deferred_req_list,
+ list) {
+ if (request == req)
+ goto found;
+ }
+
+ goto not_found;
+
+found:
+
+ if (priv_ep->wa1_trb == priv_req->trb)
+ cdns3_wa1_restore_cycle_bit(priv_ep);
+
+ link_trb = priv_req->trb;
+ cdns3_move_deq_to_next_trb(priv_req);
+ cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET);
+
+ /* Update ring */
+ request = cdns3_next_request(&priv_ep->deferred_req_list);
+ if (request) {
+ priv_req = to_cdns3_request(request);
+
+ link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma +
+ (priv_req->start_trb * TRB_SIZE));
+ link_trb->control = (link_trb->control & TRB_CYCLE) |
+ TRB_TYPE(TRB_LINK) | TRB_CHAIN | TRB_TOGGLE;
+ } else {
+ priv_ep->flags |= EP_UPDATE_EP_TRBADDR;
+ }
+
+not_found:
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ return ret;
+}
+
+/**
+ * __cdns3_gadget_ep_set_halt Sets stall on selected endpoint
+ * Should be called after acquiring spin_lock and selecting ep
+ * @ep: endpoint object to set stall on.
+ */
+void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+
+ trace_cdns3_halt(priv_ep, 1, 0);
+
+ if (!(priv_ep->flags & EP_STALLED)) {
+ u32 ep_sts_reg = readl(&priv_dev->regs->ep_sts);
+
+ if (!(ep_sts_reg & EP_STS_DBUSY))
+ cdns3_ep_stall_flush(priv_ep);
+ else
+ priv_ep->flags |= EP_STALL_PENDING;
+ }
+}
+
+/**
+ * __cdns3_gadget_ep_clear_halt Clears stall on selected endpoint
+ * Should be called after acquiring spin_lock and selecting ep
+ * @ep: endpoint object to clear stall on
+ */
+int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
+{
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ struct usb_request *request;
+ int ret;
+ int val;
+
+ trace_cdns3_halt(priv_ep, 0, 0);
+
+ writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+
+ /* wait for EPRST cleared */
+ ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+ !(val & EP_CMD_EPRST), 1, 100);
+ if (ret)
+ return -EINVAL;
+
+ priv_ep->flags &= ~(EP_STALLED | EP_STALL_PENDING);
+
+ request = cdns3_next_request(&priv_ep->pending_req_list);
+
+ if (request)
+ cdns3_rearm_transfer(priv_ep, 1);
+
+ cdns3_start_all_request(priv_dev, priv_ep);
+ return ret;
+}
+
+/**
+ * cdns3_gadget_ep_set_halt Sets/clears stall on selected endpoint
+ * @ep: endpoint object to set/clear stall on
+ * @value: 1 for set stall, 0 for clear stall
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+ struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
+ struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
+ unsigned long flags;
+ int ret = 0;
+
+ if (!(priv_ep->flags & EP_ENABLED))
+ return -EPERM;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+
+ cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
+
+ if (!value) {
+ priv_ep->flags &= ~EP_WEDGE;
+ ret = __cdns3_gadget_ep_clear_halt(priv_ep);
+ } else {
+ __cdns3_gadget_ep_set_halt(priv_ep);
+ }
+
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+
+ return ret;
+}
+
+extern const struct usb_ep_ops cdns3_gadget_ep0_ops;
+
+static const struct usb_ep_ops cdns3_gadget_ep_ops = {
+ .enable = cdns3_gadget_ep_enable,
+ .disable = cdns3_gadget_ep_disable,
+ .alloc_request = cdns3_gadget_ep_alloc_request,
+ .free_request = cdns3_gadget_ep_free_request,
+ .queue = cdns3_gadget_ep_queue,
+ .dequeue = cdns3_gadget_ep_dequeue,
+ .set_halt = cdns3_gadget_ep_set_halt,
+ .set_wedge = cdns3_gadget_ep_set_wedge,
+};
+
+/**
+ * cdns3_gadget_get_frame Returns number of actual ITP frame
+ * @gadget: gadget object
+ *
+ * Returns number of actual ITP frame
+ */
+static int cdns3_gadget_get_frame(struct usb_gadget *gadget)
+{
+ struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+
+ return readl(&priv_dev->regs->usb_itpn);
+}
+
+int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev)
+{
+ enum usb_device_speed speed;
+
+ speed = cdns3_get_speed(priv_dev);
+
+ if (speed >= USB_SPEED_SUPER)
+ return 0;
+
+ /* Start driving resume signaling to indicate remote wakeup. */
+ writel(USB_CONF_LGO_L0, &priv_dev->regs->usb_conf);
+
+ return 0;
+}
+
+static int cdns3_gadget_wakeup(struct usb_gadget *gadget)
+{
+ struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+ ret = __cdns3_gadget_wakeup(priv_dev);
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ return ret;
+}
+
+static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget,
+ int is_selfpowered)
+{
+ struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+ priv_dev->is_selfpowered = !!is_selfpowered;
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ return 0;
+}
+
+static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+
+ if (is_on)
+ writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
+ else
+ writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
+
+ return 0;
+}
+
+static void cdns3_gadget_config(struct cdns3_device *priv_dev)
+{
+ struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
+ u32 reg;
+
+ cdns3_ep0_config(priv_dev);
+
+ /* enable interrupts for endpoint 0 (in and out) */
+ writel(EP_IEN_EP_OUT0 | EP_IEN_EP_IN0, &regs->ep_ien);
+
+ /*
+ * Driver needs to modify LFPS minimal U1 Exit time for DEV_VER_TI_V1
+ * revision of controller.
+ */
+ if (priv_dev->dev_ver == DEV_VER_TI_V1) {
+ reg = readl(&regs->dbg_link1);
+
+ reg &= ~DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK;
+ reg |= DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(0x55) |
+ DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET;
+ writel(reg, &regs->dbg_link1);
+ }
+
+ /*
+ * By default some platforms has set protected access to memory.
+ * This cause problem with cache, so driver restore non-secure
+ * access to memory.
+ */
+ reg = readl(&regs->dma_axi_ctrl);
+ reg |= DMA_AXI_CTRL_MARPROT(DMA_AXI_CTRL_NON_SECURE) |
+ DMA_AXI_CTRL_MAWPROT(DMA_AXI_CTRL_NON_SECURE);
+ writel(reg, &regs->dma_axi_ctrl);
+
+ /* enable generic interrupt*/
+ writel(USB_IEN_INIT, &regs->usb_ien);
+ writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, &regs->usb_conf);
+
+ cdns3_configure_dmult(priv_dev, NULL);
+
+ cdns3_gadget_pullup(&priv_dev->gadget, 1);
+}
+
+/**
+ * cdns3_gadget_udc_start Gadget start
+ * @gadget: gadget object
+ * @driver: driver which operates on this gadget
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
+{
+ struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv_dev->lock, flags);
+ priv_dev->gadget_driver = driver;
+ cdns3_gadget_config(priv_dev);
+ spin_unlock_irqrestore(&priv_dev->lock, flags);
+ return 0;
+}
+
+/**
+ * cdns3_gadget_udc_stop Stops gadget
+ * @gadget: gadget object
+ *
+ * Returns 0
+ */
+static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
+{
+ struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+ struct cdns3_endpoint *priv_ep;
+ u32 bEndpointAddress;
+ struct usb_ep *ep;
+ int ret = 0;
+ int val;
+
+ priv_dev->gadget_driver = NULL;
+
+ priv_dev->onchip_used_size = 0;
+ priv_dev->out_mem_is_allocated = 0;
+ priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+ list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
+ priv_ep = ep_to_cdns3_ep(ep);
+ bEndpointAddress = priv_ep->num | priv_ep->dir;
+ cdns3_select_ep(priv_dev, bEndpointAddress);
+ writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
+ readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+ !(val & EP_CMD_EPRST), 1, 100);
+ }
+
+ /* disable interrupt for device */
+ writel(0, &priv_dev->regs->usb_ien);
+ writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
+
+ return ret;
+}
+
+static const struct usb_gadget_ops cdns3_gadget_ops = {
+ .get_frame = cdns3_gadget_get_frame,
+ .wakeup = cdns3_gadget_wakeup,
+ .set_selfpowered = cdns3_gadget_set_selfpowered,
+ .pullup = cdns3_gadget_pullup,
+ .udc_start = cdns3_gadget_udc_start,
+ .udc_stop = cdns3_gadget_udc_stop,
+ .match_ep = cdns3_gadget_match_ep,
+};
+
+static void cdns3_free_all_eps(struct cdns3_device *priv_dev)
+{
+ int i;
+
+ /* ep0 OUT point to ep0 IN. */
+ priv_dev->eps[16] = NULL;
+
+ for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++)
+ if (priv_dev->eps[i]) {
+ cdns3_free_trb_pool(priv_dev->eps[i]);
+ devm_kfree(priv_dev->dev, priv_dev->eps[i]);
+ }
+}
+
+/**
+ * cdns3_init_eps Initializes software endpoints of gadget
+ * @cdns3: extended gadget object
+ *
+ * Returns 0 on success, error code elsewhere
+ */
+static int cdns3_init_eps(struct cdns3_device *priv_dev)
+{
+ u32 ep_enabled_reg, iso_ep_reg;
+ struct cdns3_endpoint *priv_ep;
+ int ep_dir, ep_number;
+ u32 ep_mask;
+ int ret = 0;
+ int i;
+
+ /* Read it from USB_CAP3 to USB_CAP5 */
+ ep_enabled_reg = readl(&priv_dev->regs->usb_cap3);
+ iso_ep_reg = readl(&priv_dev->regs->usb_cap4);
+
+ dev_dbg(priv_dev->dev, "Initializing non-zero endpoints\n");
+
+ for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
+ ep_dir = i >> 4; /* i div 16 */
+ ep_number = i & 0xF; /* i % 16 */
+ ep_mask = BIT(i);
+
+ if (!(ep_enabled_reg & ep_mask))
+ continue;
+
+ if (ep_dir && !ep_number) {
+ priv_dev->eps[i] = priv_dev->eps[0];
+ continue;
+ }
+
+ priv_ep = devm_kzalloc(priv_dev->dev, sizeof(*priv_ep),
+ GFP_KERNEL);
+ if (!priv_ep)
+ goto err;
+
+ /* set parent of endpoint object */
+ priv_ep->cdns3_dev = priv_dev;
+ priv_dev->eps[i] = priv_ep;
+ priv_ep->num = ep_number;
+ priv_ep->dir = ep_dir ? USB_DIR_IN : USB_DIR_OUT;
+
+ if (!ep_number) {
+ ret = cdns3_init_ep0(priv_dev, priv_ep);
+ if (ret) {
+ dev_err(priv_dev->dev, "Failed to init ep0\n");
+ goto err;
+ }
+ } else {
+ snprintf(priv_ep->name, sizeof(priv_ep->name), "ep%d%s",
+ ep_number, !!ep_dir ? "in" : "out");
+ priv_ep->endpoint.name = priv_ep->name;
+
+ usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
+ CDNS3_EP_MAX_PACKET_LIMIT);
+ priv_ep->endpoint.max_streams = CDNS3_EP_MAX_STREAMS;
+ priv_ep->endpoint.ops = &cdns3_gadget_ep_ops;
+ if (ep_dir)
+ priv_ep->endpoint.caps.dir_in = 1;
+ else
+ priv_ep->endpoint.caps.dir_out = 1;
+
+ if (iso_ep_reg & ep_mask)
+ priv_ep->endpoint.caps.type_iso = 1;
+
+ priv_ep->endpoint.caps.type_bulk = 1;
+ priv_ep->endpoint.caps.type_int = 1;
+
+ list_add_tail(&priv_ep->endpoint.ep_list,
+ &priv_dev->gadget.ep_list);
+ }
+
+ priv_ep->flags = 0;
+
+ dev_info(priv_dev->dev, "Initialized %s support: %s %s\n",
+ priv_ep->name,
+ priv_ep->endpoint.caps.type_bulk ? "BULK, INT" : "",
+ priv_ep->endpoint.caps.type_iso ? "ISO" : "");
+
+ INIT_LIST_HEAD(&priv_ep->pending_req_list);
+ INIT_LIST_HEAD(&priv_ep->deferred_req_list);
+ INIT_LIST_HEAD(&priv_ep->wa2_descmiss_req_list);
+ }
+
+ return 0;
+err:
+ cdns3_free_all_eps(priv_dev);
+ return -ENOMEM;
+}
+
+void cdns3_gadget_exit(struct cdns3 *cdns)
+{
+ struct cdns3_device *priv_dev;
+
+ priv_dev = cdns->gadget_dev;
+
+ devm_free_irq(cdns->dev, cdns->dev_irq, cdns);
+
+ pm_runtime_mark_last_busy(cdns->dev);
+ pm_runtime_put_autosuspend(cdns->dev);
+
+ usb_del_gadget_udc(&priv_dev->gadget);
+
+ cdns3_free_all_eps(priv_dev);
+
+ while (!list_empty(&priv_dev->aligned_buf_list)) {
+ struct cdns3_aligned_buf *buf;
+
+ buf = cdns3_next_align_buf(&priv_dev->aligned_buf_list);
+ dma_free_coherent(priv_dev->sysdev, buf->size,
+ buf->buf,
+ buf->dma);
+
+ list_del(&buf->list);
+ kfree(buf);
+ }
+
+ dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf,
+ priv_dev->setup_dma);
+
+ kfree(priv_dev->zlp_buf);
+ kfree(priv_dev);
+ cdns->gadget_dev = NULL;
+ cdns3_drd_switch_gadget(cdns, 0);
+}
+
+static int cdns3_gadget_start(struct cdns3 *cdns)
+{
+ struct cdns3_device *priv_dev;
+ u32 max_speed;
+ int ret;
+
+ priv_dev = kzalloc(sizeof(*priv_dev), GFP_KERNEL);
+ if (!priv_dev)
+ return -ENOMEM;
+
+ cdns->gadget_dev = priv_dev;
+ priv_dev->sysdev = cdns->dev;
+ priv_dev->dev = cdns->dev;
+ priv_dev->regs = cdns->dev_regs;
+
+ device_property_read_u16(priv_dev->dev, "cdns,on-chip-buff-size",
+ &priv_dev->onchip_buffers);
+
+ if (priv_dev->onchip_buffers <= 0) {
+ u32 reg = readl(&priv_dev->regs->usb_cap2);
+
+ priv_dev->onchip_buffers = USB_CAP2_ACTUAL_MEM_SIZE(reg);
+ }
+
+ if (!priv_dev->onchip_buffers)
+ priv_dev->onchip_buffers = 256;
+
+ max_speed = usb_get_maximum_speed(cdns->dev);
+
+ /* Check the maximum_speed parameter */
+ switch (max_speed) {
+ case USB_SPEED_FULL:
+ writel(USB_CONF_SFORCE_FS, &priv_dev->regs->usb_conf);
+ break;
+ case USB_SPEED_HIGH:
+ writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
+ break;
+ case USB_SPEED_SUPER:
+ break;
+ default:
+ dev_err(cdns->dev, "invalid maximum_speed parameter %d\n",
+ max_speed);
+ /* fall through */
+ case USB_SPEED_UNKNOWN:
+ /* default to superspeed */
+ max_speed = USB_SPEED_SUPER;
+ break;
+ }
+
+ /* fill gadget fields */
+ priv_dev->gadget.max_speed = max_speed;
+ priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+ priv_dev->gadget.ops = &cdns3_gadget_ops;
+ priv_dev->gadget.name = "usb-ss-gadget";
+ priv_dev->gadget.sg_supported = 1;
+ priv_dev->gadget.quirk_avoids_skb_reserve = 1;
+
+ spin_lock_init(&priv_dev->lock);
+ INIT_WORK(&priv_dev->pending_status_wq,
+ cdns3_pending_setup_status_handler);
+
+ INIT_WORK(&priv_dev->aligned_buf_wq,
+ cdns3_free_aligned_request_buf);
+
+ /* initialize endpoint container */
+ INIT_LIST_HEAD(&priv_dev->gadget.ep_list);
+ INIT_LIST_HEAD(&priv_dev->aligned_buf_list);
+
+ ret = cdns3_init_eps(priv_dev);
+ if (ret) {
+ dev_err(priv_dev->dev, "Failed to create endpoints\n");
+ goto err1;
+ }
+
+ /* allocate memory for setup packet buffer */
+ priv_dev->setup_buf = dma_alloc_coherent(priv_dev->sysdev, 8,
+ &priv_dev->setup_dma, GFP_DMA);
+ if (!priv_dev->setup_buf) {
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ priv_dev->dev_ver = readl(&priv_dev->regs->usb_cap6);
+
+ dev_dbg(priv_dev->dev, "Device Controller version: %08x\n",
+ readl(&priv_dev->regs->usb_cap6));
+ dev_dbg(priv_dev->dev, "USB Capabilities:: %08x\n",
+ readl(&priv_dev->regs->usb_cap1));
+ dev_dbg(priv_dev->dev, "On-Chip memory configuration: %08x\n",
+ readl(&priv_dev->regs->usb_cap2));
+
+ priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver);
+
+ priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL);
+ if (!priv_dev->zlp_buf) {
+ ret = -ENOMEM;
+ goto err3;
+ }
+
+ /* add USB gadget device */
+ ret = usb_add_gadget_udc(priv_dev->dev, &priv_dev->gadget);
+ if (ret < 0) {
+ dev_err(priv_dev->dev,
+ "Failed to register USB device controller\n");
+ goto err4;
+ }
+
+ return 0;
+err4:
+ kfree(priv_dev->zlp_buf);
+err3:
+ dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf,
+ priv_dev->setup_dma);
+err2:
+ cdns3_free_all_eps(priv_dev);
+err1:
+ cdns->gadget_dev = NULL;
+ return ret;
+}
+
+static int __cdns3_gadget_init(struct cdns3 *cdns)
+{
+ int ret = 0;
+
+ cdns3_drd_switch_gadget(cdns, 1);
+ pm_runtime_get_sync(cdns->dev);
+
+ ret = cdns3_gadget_start(cdns);
+ if (ret)
+ return ret;
+
+ /*
+ * Because interrupt line can be shared with other components in
+ * driver it can't use IRQF_ONESHOT flag here.
+ */
+ ret = devm_request_threaded_irq(cdns->dev, cdns->dev_irq,
+ cdns3_device_irq_handler,
+ cdns3_device_thread_irq_handler,
+ IRQF_SHARED, dev_name(cdns->dev), cdns);
+
+ if (ret)
+ goto err0;
+
+ return 0;
+err0:
+ cdns3_gadget_exit(cdns);
+ return ret;
+}
+
+static int cdns3_gadget_suspend(struct cdns3 *cdns, bool do_wakeup)
+{
+ struct cdns3_device *priv_dev = cdns->gadget_dev;
+
+ cdns3_disconnect_gadget(priv_dev);
+
+ priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
+ usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
+ cdns3_hw_reset_eps_config(priv_dev);
+
+ /* disable interrupt for device */
+ writel(0, &priv_dev->regs->usb_ien);
+
+ cdns3_gadget_pullup(&priv_dev->gadget, 0);
+
+ return 0;
+}
+
+static int cdns3_gadget_resume(struct cdns3 *cdns, bool hibernated)
+{
+ struct cdns3_device *priv_dev = cdns->gadget_dev;
+
+ if (!priv_dev->gadget_driver)
+ return 0;
+
+ cdns3_gadget_config(priv_dev);
+
+ return 0;
+}
+
+/**
+ * cdns3_gadget_init - initialize device structure
+ *
+ * cdns: cdns3 instance
+ *
+ * This function initializes the gadget.
+ */
+int cdns3_gadget_init(struct cdns3 *cdns)
+{
+ struct cdns3_role_driver *rdrv;
+
+ rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+ if (!rdrv)
+ return -ENOMEM;
+
+ rdrv->start = __cdns3_gadget_init;
+ rdrv->stop = cdns3_gadget_exit;
+ rdrv->suspend = cdns3_gadget_suspend;
+ rdrv->resume = cdns3_gadget_resume;
+ rdrv->state = CDNS3_ROLE_STATE_INACTIVE;
+ rdrv->name = "gadget";
+ cdns->roles[USB_ROLE_DEVICE] = rdrv;
+
+ return 0;
+}
diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h
new file mode 100644
index 000000000000..bc4024041ef2
--- /dev/null
+++ b/drivers/usb/cdns3/gadget.h
@@ -0,0 +1,1338 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * USBSS device controller driver header file
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ * Pawel Jez <pjez@cadence.com>
+ * Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_GADGET
+#define __LINUX_CDNS3_GADGET
+#include <linux/usb/gadget.h>
+
+/*
+ * USBSS-DEV register interface.
+ * This corresponds to the USBSS Device Controller Interface
+ */
+
+/**
+ * struct cdns3_usb_regs - device controller registers.
+ * @usb_conf: Global Configuration.
+ * @usb_sts: Global Status.
+ * @usb_cmd: Global Command.
+ * @usb_itpn: ITP/SOF number.
+ * @usb_lpm: Global Command.
+ * @usb_ien: USB Interrupt Enable.
+ * @usb_ists: USB Interrupt Status.
+ * @ep_sel: Endpoint Select.
+ * @ep_traddr: Endpoint Transfer Ring Address.
+ * @ep_cfg: Endpoint Configuration.
+ * @ep_cmd: Endpoint Command.
+ * @ep_sts: Endpoint Status.
+ * @ep_sts_sid: Endpoint Status.
+ * @ep_sts_en: Endpoint Status Enable.
+ * @drbl: Doorbell.
+ * @ep_ien: EP Interrupt Enable.
+ * @ep_ists: EP Interrupt Status.
+ * @usb_pwr: Global Power Configuration.
+ * @usb_conf2: Global Configuration 2.
+ * @usb_cap1: Capability 1.
+ * @usb_cap2: Capability 2.
+ * @usb_cap3: Capability 3.
+ * @usb_cap4: Capability 4.
+ * @usb_cap5: Capability 5.
+ * @usb_cap6: Capability 6.
+ * @usb_cpkt1: Custom Packet 1.
+ * @usb_cpkt2: Custom Packet 2.
+ * @usb_cpkt3: Custom Packet 3.
+ * @ep_dma_ext_addr: Upper address for DMA operations.
+ * @buf_addr: Address for On-chip Buffer operations.
+ * @buf_data: Data for On-chip Buffer operations.
+ * @buf_ctrl: On-chip Buffer Access Control.
+ * @dtrans: DMA Transfer Mode.
+ * @tdl_from_trb: Source of TD Configuration.
+ * @tdl_beh: TDL Behavior Configuration.
+ * @ep_tdl: Endpoint TDL.
+ * @tdl_beh2: TDL Behavior 2 Configuration.
+ * @dma_adv_td: DMA Advance TD Configuration.
+ * @reserved1: Reserved.
+ * @cfg_regs: Configuration.
+ * @reserved2: Reserved.
+ * @dma_axi_ctrl: AXI Control.
+ * @dma_axi_id: AXI ID register.
+ * @dma_axi_cap: AXI Capability.
+ * @dma_axi_ctrl0: AXI Control 0.
+ * @dma_axi_ctrl1: AXI Control 1.
+ */
+struct cdns3_usb_regs {
+ __le32 usb_conf;
+ __le32 usb_sts;
+ __le32 usb_cmd;
+ __le32 usb_itpn;
+ __le32 usb_lpm;
+ __le32 usb_ien;
+ __le32 usb_ists;
+ __le32 ep_sel;
+ __le32 ep_traddr;
+ __le32 ep_cfg;
+ __le32 ep_cmd;
+ __le32 ep_sts;
+ __le32 ep_sts_sid;
+ __le32 ep_sts_en;
+ __le32 drbl;
+ __le32 ep_ien;
+ __le32 ep_ists;
+ __le32 usb_pwr;
+ __le32 usb_conf2;
+ __le32 usb_cap1;
+ __le32 usb_cap2;
+ __le32 usb_cap3;
+ __le32 usb_cap4;
+ __le32 usb_cap5;
+ __le32 usb_cap6;
+ __le32 usb_cpkt1;
+ __le32 usb_cpkt2;
+ __le32 usb_cpkt3;
+ __le32 ep_dma_ext_addr;
+ __le32 buf_addr;
+ __le32 buf_data;
+ __le32 buf_ctrl;
+ __le32 dtrans;
+ __le32 tdl_from_trb;
+ __le32 tdl_beh;
+ __le32 ep_tdl;
+ __le32 tdl_beh2;
+ __le32 dma_adv_td;
+ __le32 reserved1[26];
+ __le32 cfg_reg1;
+ __le32 dbg_link1;
+ __le32 dbg_link2;
+ __le32 cfg_regs[74];
+ __le32 reserved2[51];
+ __le32 dma_axi_ctrl;
+ __le32 dma_axi_id;
+ __le32 dma_axi_cap;
+ __le32 dma_axi_ctrl0;
+ __le32 dma_axi_ctrl1;
+};
+
+/* USB_CONF - bitmasks */
+/* Reset USB device configuration. */
+#define USB_CONF_CFGRST BIT(0)
+/* Set Configuration. */
+#define USB_CONF_CFGSET BIT(1)
+/* Disconnect USB device in SuperSpeed. */
+#define USB_CONF_USB3DIS BIT(3)
+/* Disconnect USB device in HS/FS */
+#define USB_CONF_USB2DIS BIT(4)
+/* Little Endian access - default */
+#define USB_CONF_LENDIAN BIT(5)
+/*
+ * Big Endian access. Driver assume that byte order for
+ * SFRs access always is as Little Endian so this bit
+ * is not used.
+ */
+#define USB_CONF_BENDIAN BIT(6)
+/* Device software reset. */
+#define USB_CONF_SWRST BIT(7)
+/* Singular DMA transfer mode. Only for VER < DEV_VER_V3*/
+#define USB_CONF_DSING BIT(8)
+/* Multiple DMA transfers mode. Only for VER < DEV_VER_V3 */
+#define USB_CONF_DMULT BIT(9)
+/* DMA clock turn-off enable. */
+#define USB_CONF_DMAOFFEN BIT(10)
+/* DMA clock turn-off disable. */
+#define USB_CONF_DMAOFFDS BIT(11)
+/* Clear Force Full Speed. */
+#define USB_CONF_CFORCE_FS BIT(12)
+/* Set Force Full Speed. */
+#define USB_CONF_SFORCE_FS BIT(13)
+/* Device enable. */
+#define USB_CONF_DEVEN BIT(14)
+/* Device disable. */
+#define USB_CONF_DEVDS BIT(15)
+/* L1 LPM state entry enable (used in HS/FS mode). */
+#define USB_CONF_L1EN BIT(16)
+/* L1 LPM state entry disable (used in HS/FS mode). */
+#define USB_CONF_L1DS BIT(17)
+/* USB 2.0 clock gate disable. */
+#define USB_CONF_CLK2OFFEN BIT(18)
+/* USB 2.0 clock gate enable. */
+#define USB_CONF_CLK2OFFDS BIT(19)
+/* L0 LPM state entry request (used in HS/FS mode). */
+#define USB_CONF_LGO_L0 BIT(20)
+/* USB 3.0 clock gate disable. */
+#define USB_CONF_CLK3OFFEN BIT(21)
+/* USB 3.0 clock gate enable. */
+#define USB_CONF_CLK3OFFDS BIT(22)
+/* Bit 23 is reserved*/
+/* U1 state entry enable (used in SS mode). */
+#define USB_CONF_U1EN BIT(24)
+/* U1 state entry disable (used in SS mode). */
+#define USB_CONF_U1DS BIT(25)
+/* U2 state entry enable (used in SS mode). */
+#define USB_CONF_U2EN BIT(26)
+/* U2 state entry disable (used in SS mode). */
+#define USB_CONF_U2DS BIT(27)
+/* U0 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U0 BIT(28)
+/* U1 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U1 BIT(29)
+/* U2 state entry request (used in SS mode). */
+#define USB_CONF_LGO_U2 BIT(30)
+/* SS.Inactive state entry request (used in SS mode) */
+#define USB_CONF_LGO_SSINACT BIT(31)
+
+/* USB_STS - bitmasks */
+/*
+ * Configuration status.
+ * 1 - device is in the configured state.
+ * 0 - device is not configured.
+ */
+#define USB_STS_CFGSTS_MASK BIT(0)
+#define USB_STS_CFGSTS(p) ((p) & USB_STS_CFGSTS_MASK)
+/*
+ * On-chip memory overflow.
+ * 0 - On-chip memory status OK.
+ * 1 - On-chip memory overflow.
+ */
+#define USB_STS_OV_MASK BIT(1)
+#define USB_STS_OV(p) ((p) & USB_STS_OV_MASK)
+/*
+ * SuperSpeed connection status.
+ * 0 - USB in SuperSpeed mode disconnected.
+ * 1 - USB in SuperSpeed mode connected.
+ */
+#define USB_STS_USB3CONS_MASK BIT(2)
+#define USB_STS_USB3CONS(p) ((p) & USB_STS_USB3CONS_MASK)
+/*
+ * DMA transfer configuration status.
+ * 0 - single request.
+ * 1 - multiple TRB chain
+ * Supported only for controller version < DEV_VER_V3
+ */
+#define USB_STS_DTRANS_MASK BIT(3)
+#define USB_STS_DTRANS(p) ((p) & USB_STS_DTRANS_MASK)
+/*
+ * Device speed.
+ * 0 - Undefined (value after reset).
+ * 1 - Low speed
+ * 2 - Full speed
+ * 3 - High speed
+ * 4 - Super speed
+ */
+#define USB_STS_USBSPEED_MASK GENMASK(6, 4)
+#define USB_STS_USBSPEED(p) (((p) & USB_STS_USBSPEED_MASK) >> 4)
+#define USB_STS_LS (0x1 << 4)
+#define USB_STS_FS (0x2 << 4)
+#define USB_STS_HS (0x3 << 4)
+#define USB_STS_SS (0x4 << 4)
+#define DEV_UNDEFSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == (0x0 << 4))
+#define DEV_LOWSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_LS)
+#define DEV_FULLSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_FS)
+#define DEV_HIGHSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_HS)
+#define DEV_SUPERSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_SS)
+/*
+ * Endianness for SFR access.
+ * 0 - Little Endian order (default after hardware reset).
+ * 1 - Big Endian order
+ */
+#define USB_STS_ENDIAN_MASK BIT(7)
+#define USB_STS_ENDIAN(p) ((p) & USB_STS_ENDIAN_MASK)
+/*
+ * HS/FS clock turn-off status.
+ * 0 - hsfs clock is always on.
+ * 1 - hsfs clock turn-off in L2 (HS/FS mode) is enabled
+ * (default after hardware reset).
+ */
+#define USB_STS_CLK2OFF_MASK BIT(8)
+#define USB_STS_CLK2OFF(p) ((p) & USB_STS_CLK2OFF_MASK)
+/*
+ * PCLK clock turn-off status.
+ * 0 - pclk clock is always on.
+ * 1 - pclk clock turn-off in U3 (SS mode) is enabled
+ * (default after hardware reset).
+ */
+#define USB_STS_CLK3OFF_MASK BIT(9)
+#define USB_STS_CLK3OFF(p) ((p) & USB_STS_CLK3OFF_MASK)
+/*
+ * Controller in reset state.
+ * 0 - Internal reset is active.
+ * 1 - Internal reset is not active and controller is fully operational.
+ */
+#define USB_STS_IN_RST_MASK BIT(10)
+#define USB_STS_IN_RST(p) ((p) & USB_STS_IN_RST_MASK)
+/*
+ * Status of the "TDL calculation basing on TRB" feature.
+ * 0 - disabled
+ * 1 - enabled
+ * Supported only for DEV_VER_V2 controller version.
+ */
+#define USB_STS_TDL_TRB_ENABLED BIT(11)
+/*
+ * Device enable Status.
+ * 0 - USB device is disabled (VBUS input is disconnected from internal logic).
+ * 1 - USB device is enabled (VBUS input is connected to the internal logic).
+ */
+#define USB_STS_DEVS_MASK BIT(14)
+#define USB_STS_DEVS(p) ((p) & USB_STS_DEVS_MASK)
+/*
+ * Address status.
+ * 0 - USB device is default state.
+ * 1 - USB device is at least in address state.
+ */
+#define USB_STS_ADDRESSED_MASK BIT(15)
+#define USB_STS_ADDRESSED(p) ((p) & USB_STS_ADDRESSED_MASK)
+/*
+ * L1 LPM state enable status (used in HS/FS mode).
+ * 0 - Entering to L1 LPM state disabled.
+ * 1 - Entering to L1 LPM state enabled.
+ */
+#define USB_STS_L1ENS_MASK BIT(16)
+#define USB_STS_L1ENS(p) ((p) & USB_STS_L1ENS_MASK)
+/*
+ * Internal VBUS connection status (used both in HS/FS and SS mode).
+ * 0 - internal VBUS is not detected.
+ * 1 - internal VBUS is detected.
+ */
+#define USB_STS_VBUSS_MASK BIT(17)
+#define USB_STS_VBUSS(p) ((p) & USB_STS_VBUSS_MASK)
+/*
+ * HS/FS LPM state (used in FS/HS mode).
+ * 0 - L0 State
+ * 1 - L1 State
+ * 2 - L2 State
+ * 3 - L3 State
+ */
+#define USB_STS_LPMST_MASK GENMASK(19, 18)
+#define DEV_L0_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x0 << 18))
+#define DEV_L1_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x1 << 18))
+#define DEV_L2_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x2 << 18))
+#define DEV_L3_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x3 << 18))
+/*
+ * Disable HS status (used in FS/HS mode).
+ * 0 - the disconnect bit for HS/FS mode is set .
+ * 1 - the disconnect bit for HS/FS mode is not set.
+ */
+#define USB_STS_USB2CONS_MASK BIT(20)
+#define USB_STS_USB2CONS(p) ((p) & USB_STS_USB2CONS_MASK)
+/*
+ * HS/FS mode connection status (used in FS/HS mode).
+ * 0 - High Speed operations in USB2.0 (FS/HS) mode not disabled.
+ * 1 - High Speed operations in USB2.0 (FS/HS).
+ */
+#define USB_STS_DISABLE_HS_MASK BIT(21)
+#define USB_STS_DISABLE_HS(p) ((p) & USB_STS_DISABLE_HS_MASK)
+/*
+ * U1 state enable status (used in SS mode).
+ * 0 - Entering to U1 state disabled.
+ * 1 - Entering to U1 state enabled.
+ */
+#define USB_STS_U1ENS_MASK BIT(24)
+#define USB_STS_U1ENS(p) ((p) & USB_STS_U1ENS_MASK)
+/*
+ * U2 state enable status (used in SS mode).
+ * 0 - Entering to U2 state disabled.
+ * 1 - Entering to U2 state enabled.
+ */
+#define USB_STS_U2ENS_MASK BIT(25)
+#define USB_STS_U2ENS(p) ((p) & USB_STS_U2ENS_MASK)
+/*
+ * SuperSpeed Link LTSSM state. This field reflects USBSS-DEV current
+ * SuperSpeed link state
+ */
+#define USB_STS_LST_MASK GENMASK(29, 26)
+#define DEV_LST_U0 (((p) & USB_STS_LST_MASK) == (0x0 << 26))
+#define DEV_LST_U1 (((p) & USB_STS_LST_MASK) == (0x1 << 26))
+#define DEV_LST_U2 (((p) & USB_STS_LST_MASK) == (0x2 << 26))
+#define DEV_LST_U3 (((p) & USB_STS_LST_MASK) == (0x3 << 26))
+#define DEV_LST_DISABLED (((p) & USB_STS_LST_MASK) == (0x4 << 26))
+#define DEV_LST_RXDETECT (((p) & USB_STS_LST_MASK) == (0x5 << 26))
+#define DEV_LST_INACTIVE (((p) & USB_STS_LST_MASK) == (0x6 << 26))
+#define DEV_LST_POLLING (((p) & USB_STS_LST_MASK) == (0x7 << 26))
+#define DEV_LST_RECOVERY (((p) & USB_STS_LST_MASK) == (0x8 << 26))
+#define DEV_LST_HOT_RESET (((p) & USB_STS_LST_MASK) == (0x9 << 26))
+#define DEV_LST_COMP_MODE (((p) & USB_STS_LST_MASK) == (0xa << 26))
+#define DEV_LST_LB_STATE (((p) & USB_STS_LST_MASK) == (0xb << 26))
+/*
+ * DMA clock turn-off status.
+ * 0 - DMA clock is always on (default after hardware reset).
+ * 1 - DMA clock turn-off in U1, U2 and U3 (SS mode) is enabled.
+ */
+#define USB_STS_DMAOFF_MASK BIT(30)
+#define USB_STS_DMAOFF(p) ((p) & USB_STS_DMAOFF_MASK)
+/*
+ * SFR Endian status.
+ * 0 - Little Endian order (default after hardware reset).
+ * 1 - Big Endian order.
+ */
+#define USB_STS_ENDIAN2_MASK BIT(31)
+#define USB_STS_ENDIAN2(p) ((p) & USB_STS_ENDIAN2_MASK)
+
+/* USB_CMD - bitmasks */
+/* Set Function Address */
+#define USB_CMD_SET_ADDR BIT(0)
+/*
+ * Function Address This field is saved to the device only when the field
+ * SET_ADDR is set '1 ' during write to USB_CMD register.
+ * Software is responsible for entering the address of the device during
+ * SET_ADDRESS request service. This field should be set immediately after
+ * the SETUP packet is decoded, and prior to confirmation of the status phase
+ */
+#define USB_CMD_FADDR_MASK GENMASK(7, 1)
+#define USB_CMD_FADDR(p) (((p) << 1) & USB_CMD_FADDR_MASK)
+/* Send Function Wake Device Notification TP (used only in SS mode). */
+#define USB_CMD_SDNFW BIT(8)
+/* Set Test Mode (used only in HS/FS mode). */
+#define USB_CMD_STMODE BIT(9)
+/* Test mode selector (used only in HS/FS mode) */
+#define USB_STS_TMODE_SEL_MASK GENMASK(11, 10)
+#define USB_STS_TMODE_SEL(p) (((p) << 10) & USB_STS_TMODE_SEL_MASK)
+/*
+ * Send Latency Tolerance Message Device Notification TP (used only
+ * in SS mode).
+ */
+#define USB_CMD_SDNLTM BIT(12)
+/* Send Custom Transaction Packet (used only in SS mode) */
+#define USB_CMD_SPKT BIT(13)
+/*Device Notification 'Function Wake' - Interface value (only in SS mode. */
+#define USB_CMD_DNFW_INT_MASK GENMASK(23, 16)
+#define USB_STS_DNFW_INT(p) (((p) << 16) & USB_CMD_DNFW_INT_MASK)
+/*
+ * Device Notification 'Latency Tolerance Message' -373 BELT value [7:0]
+ * (used only in SS mode).
+ */
+#define USB_CMD_DNLTM_BELT_MASK GENMASK(27, 16)
+#define USB_STS_DNLTM_BELT(p) (((p) << 16) & USB_CMD_DNLTM_BELT_MASK)
+
+/* USB_ITPN - bitmasks */
+/*
+ * ITP(SS) / SOF (HS/FS) number
+ * In SS mode this field represent number of last ITP received from host.
+ * In HS/FS mode this field represent number of last SOF received from host.
+ */
+#define USB_ITPN_MASK GENMASK(13, 0)
+#define USB_ITPN(p) ((p) & USB_ITPN_MASK)
+
+/* USB_LPM - bitmasks */
+/* Host Initiated Resume Duration. */
+#define USB_LPM_HIRD_MASK GENMASK(3, 0)
+#define USB_LPM_HIRD(p) ((p) & USB_LPM_HIRD_MASK)
+/* Remote Wakeup Enable (bRemoteWake). */
+#define USB_LPM_BRW BIT(4)
+
+/* USB_IEN - bitmasks */
+/* SS connection interrupt enable */
+#define USB_IEN_CONIEN BIT(0)
+/* SS disconnection interrupt enable. */
+#define USB_IEN_DISIEN BIT(1)
+/* USB SS warm reset interrupt enable. */
+#define USB_IEN_UWRESIEN BIT(2)
+/* USB SS hot reset interrupt enable */
+#define USB_IEN_UHRESIEN BIT(3)
+/* SS link U3 state enter interrupt enable (suspend).*/
+#define USB_IEN_U3ENTIEN BIT(4)
+/* SS link U3 state exit interrupt enable (wakeup). */
+#define USB_IEN_U3EXTIEN BIT(5)
+/* SS link U2 state enter interrupt enable.*/
+#define USB_IEN_U2ENTIEN BIT(6)
+/* SS link U2 state exit interrupt enable.*/
+#define USB_IEN_U2EXTIEN BIT(7)
+/* SS link U1 state enter interrupt enable.*/
+#define USB_IEN_U1ENTIEN BIT(8)
+/* SS link U1 state exit interrupt enable.*/
+#define USB_IEN_U1EXTIEN BIT(9)
+/* ITP/SOF packet detected interrupt enable.*/
+#define USB_IEN_ITPIEN BIT(10)
+/* Wakeup interrupt enable.*/
+#define USB_IEN_WAKEIEN BIT(11)
+/* Send Custom Packet interrupt enable.*/
+#define USB_IEN_SPKTIEN BIT(12)
+/* HS/FS mode connection interrupt enable.*/
+#define USB_IEN_CON2IEN BIT(16)
+/* HS/FS mode disconnection interrupt enable.*/
+#define USB_IEN_DIS2IEN BIT(17)
+/* USB reset (HS/FS mode) interrupt enable.*/
+#define USB_IEN_U2RESIEN BIT(18)
+/* LPM L2 state enter interrupt enable.*/
+#define USB_IEN_L2ENTIEN BIT(20)
+/* LPM L2 state exit interrupt enable.*/
+#define USB_IEN_L2EXTIEN BIT(21)
+/* LPM L1 state enter interrupt enable.*/
+#define USB_IEN_L1ENTIEN BIT(24)
+/* LPM L1 state exit interrupt enable.*/
+#define USB_IEN_L1EXTIEN BIT(25)
+/* Configuration reset interrupt enable.*/
+#define USB_IEN_CFGRESIEN BIT(26)
+/* Start of the USB SS warm reset interrupt enable.*/
+#define USB_IEN_UWRESSIEN BIT(28)
+/* End of the USB SS warm reset interrupt enable.*/
+#define USB_IEN_UWRESEIEN BIT(29)
+
+#define USB_IEN_INIT (USB_IEN_U2RESIEN | USB_ISTS_DIS2I | USB_IEN_CON2IEN \
+ | USB_IEN_UHRESIEN | USB_IEN_UWRESIEN | USB_IEN_DISIEN \
+ | USB_IEN_CONIEN | USB_IEN_U3EXTIEN | USB_IEN_L2ENTIEN \
+ | USB_IEN_L2EXTIEN | USB_IEN_L1ENTIEN | USB_IEN_U3ENTIEN)
+
+/* USB_ISTS - bitmasks */
+/* SS Connection detected. */
+#define USB_ISTS_CONI BIT(0)
+/* SS Disconnection detected. */
+#define USB_ISTS_DISI BIT(1)
+/* UUSB warm reset detectede. */
+#define USB_ISTS_UWRESI BIT(2)
+/* USB hot reset detected. */
+#define USB_ISTS_UHRESI BIT(3)
+/* U3 link state enter detected (suspend).*/
+#define USB_ISTS_U3ENTI BIT(4)
+/* U3 link state exit detected (wakeup). */
+#define USB_ISTS_U3EXTI BIT(5)
+/* U2 link state enter detected.*/
+#define USB_ISTS_U2ENTI BIT(6)
+/* U2 link state exit detected.*/
+#define USB_ISTS_U2EXTI BIT(7)
+/* U1 link state enter detected.*/
+#define USB_ISTS_U1ENTI BIT(8)
+/* U1 link state exit detected.*/
+#define USB_ISTS_U1EXTI BIT(9)
+/* ITP/SOF packet detected.*/
+#define USB_ISTS_ITPI BIT(10)
+/* Wakeup detected.*/
+#define USB_ISTS_WAKEI BIT(11)
+/* Send Custom Packet detected.*/
+#define USB_ISTS_SPKTI BIT(12)
+/* HS/FS mode connection detected.*/
+#define USB_ISTS_CON2I BIT(16)
+/* HS/FS mode disconnection detected.*/
+#define USB_ISTS_DIS2I BIT(17)
+/* USB reset (HS/FS mode) detected.*/
+#define USB_ISTS_U2RESI BIT(18)
+/* LPM L2 state enter detected.*/
+#define USB_ISTS_L2ENTI BIT(20)
+/* LPM L2 state exit detected.*/
+#define USB_ISTS_L2EXTI BIT(21)
+/* LPM L1 state enter detected.*/
+#define USB_ISTS_L1ENTI BIT(24)
+/* LPM L1 state exit detected.*/
+#define USB_ISTS_L1EXTI BIT(25)
+/* USB configuration reset detected.*/
+#define USB_ISTS_CFGRESI BIT(26)
+/* Start of the USB warm reset detected.*/
+#define USB_ISTS_UWRESSI BIT(28)
+/* End of the USB warm reset detected.*/
+#define USB_ISTS_UWRESEI BIT(29)
+
+/* USB_SEL - bitmasks */
+#define EP_SEL_EPNO_MASK GENMASK(3, 0)
+/* Endpoint number. */
+#define EP_SEL_EPNO(p) ((p) & EP_SEL_EPNO_MASK)
+/* Endpoint direction bit - 0 - OUT, 1 - IN. */
+#define EP_SEL_DIR BIT(7)
+
+#define select_ep_in(nr) (EP_SEL_EPNO(p) | EP_SEL_DIR)
+#define select_ep_out (EP_SEL_EPNO(p))
+
+/* EP_TRADDR - bitmasks */
+/* Transfer Ring address. */
+#define EP_TRADDR_TRADDR(p) ((p))
+
+/* EP_CFG - bitmasks */
+/* Endpoint enable */
+#define EP_CFG_ENABLE BIT(0)
+/*
+ * Endpoint type.
+ * 1 - isochronous
+ * 2 - bulk
+ * 3 - interrupt
+ */
+#define EP_CFG_EPTYPE_MASK GENMASK(2, 1)
+#define EP_CFG_EPTYPE(p) (((p) << 1) & EP_CFG_EPTYPE_MASK)
+/* Stream support enable (only in SS mode). */
+#define EP_CFG_STREAM_EN BIT(3)
+/* TDL check (only in SS mode for BULK EP). */
+#define EP_CFG_TDL_CHK BIT(4)
+/* SID check (only in SS mode for BULK OUT EP). */
+#define EP_CFG_SID_CHK BIT(5)
+/* DMA transfer endianness. */
+#define EP_CFG_EPENDIAN BIT(7)
+/* Max burst size (used only in SS mode). */
+#define EP_CFG_MAXBURST_MASK GENMASK(11, 8)
+#define EP_CFG_MAXBURST(p) (((p) << 8) & EP_CFG_MAXBURST_MASK)
+/* ISO max burst. */
+#define EP_CFG_MULT_MASK GENMASK(15, 14)
+#define EP_CFG_MULT(p) (((p) << 14) & EP_CFG_MULT_MASK)
+/* ISO max burst. */
+#define EP_CFG_MAXPKTSIZE_MASK GENMASK(26, 16)
+#define EP_CFG_MAXPKTSIZE(p) (((p) << 16) & EP_CFG_MAXPKTSIZE_MASK)
+/* Max number of buffered packets. */
+#define EP_CFG_BUFFERING_MASK GENMASK(31, 27)
+#define EP_CFG_BUFFERING(p) (((p) << 27) & EP_CFG_BUFFERING_MASK)
+
+/* EP_CMD - bitmasks */
+/* Endpoint reset. */
+#define EP_CMD_EPRST BIT(0)
+/* Endpoint STALL set. */
+#define EP_CMD_SSTALL BIT(1)
+/* Endpoint STALL clear. */
+#define EP_CMD_CSTALL BIT(2)
+/* Send ERDY TP. */
+#define EP_CMD_ERDY BIT(3)
+/* Request complete. */
+#define EP_CMD_REQ_CMPL BIT(5)
+/* Transfer descriptor ready. */
+#define EP_CMD_DRDY BIT(6)
+/* Data flush. */
+#define EP_CMD_DFLUSH BIT(7)
+/*
+ * Transfer Descriptor Length write (used only for Bulk Stream capable
+ * endpoints in SS mode).
+ * Bit Removed from DEV_VER_V3 controller version.
+ */
+#define EP_CMD_STDL BIT(8)
+/*
+ * Transfer Descriptor Length (used only in SS mode for bulk endpoints).
+ * Bits Removed from DEV_VER_V3 controller version.
+ */
+#define EP_CMD_TDL_MASK GENMASK(15, 9)
+#define EP_CMD_TDL_SET(p) (((p) << 9) & EP_CMD_TDL_MASK)
+#define EP_CMD_TDL_GET(p) (((p) & EP_CMD_TDL_MASK) >> 9)
+
+/* ERDY Stream ID value (used in SS mode). */
+#define EP_CMD_ERDY_SID_MASK GENMASK(31, 16)
+#define EP_CMD_ERDY_SID(p) (((p) << 16) & EP_CMD_ERDY_SID_MASK)
+
+/* EP_STS - bitmasks */
+/* Setup transfer complete. */
+#define EP_STS_SETUP BIT(0)
+/* Endpoint STALL status. */
+#define EP_STS_STALL(p) ((p) & BIT(1))
+/* Interrupt On Complete. */
+#define EP_STS_IOC BIT(2)
+/* Interrupt on Short Packet. */
+#define EP_STS_ISP BIT(3)
+/* Transfer descriptor missing. */
+#define EP_STS_DESCMIS BIT(4)
+/* Stream Rejected (used only in SS mode) */
+#define EP_STS_STREAMR BIT(5)
+/* EXIT from MOVE DATA State (used only for stream transfers in SS mode). */
+#define EP_STS_MD_EXIT BIT(6)
+/* TRB error. */
+#define EP_STS_TRBERR BIT(7)
+/* Not ready (used only in SS mode). */
+#define EP_STS_NRDY BIT(8)
+/* DMA busy bit. */
+#define EP_STS_DBUSY BIT(9)
+/* Endpoint Buffer Empty */
+#define EP_STS_BUFFEMPTY(p) ((p) & BIT(10))
+/* Current Cycle Status */
+#define EP_STS_CCS(p) ((p) & BIT(11))
+/* Prime (used only in SS mode. */
+#define EP_STS_PRIME BIT(12)
+/* Stream error (used only in SS mode). */
+#define EP_STS_SIDERR BIT(13)
+/* OUT size mismatch. */
+#define EP_STS_OUTSMM BIT(14)
+/* ISO transmission error. */
+#define EP_STS_ISOERR BIT(15)
+/* Host Packet Pending (only for SS mode). */
+#define EP_STS_HOSTPP(p) ((p) & BIT(16))
+/* Stream Protocol State Machine State (only for Bulk stream endpoints). */
+#define EP_STS_SPSMST_MASK GENMASK(18, 17)
+#define EP_STS_SPSMST_DISABLED(p) (((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_IDLE(p) (((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_START_STREAM(p) (((p) & EP_STS_SPSMST_MASK) >> 17)
+#define EP_STS_SPSMST_MOVE_DATA(p) (((p) & EP_STS_SPSMST_MASK) >> 17)
+/* Interrupt On Transfer complete. */
+#define EP_STS_IOT BIT(19)
+/* OUT queue endpoint number. */
+#define EP_STS_OUTQ_NO_MASK GENMASK(27, 24)
+#define EP_STS_OUTQ_NO(p) (((p) & EP_STS_OUTQ_NO_MASK) >> 24)
+/* OUT queue valid flag. */
+#define EP_STS_OUTQ_VAL_MASK BIT(28)
+#define EP_STS_OUTQ_VAL(p) ((p) & EP_STS_OUTQ_VAL_MASK)
+/* SETUP WAIT. */
+#define EP_STS_STPWAIT BIT(31)
+
+/* EP_STS_SID - bitmasks */
+/* Stream ID (used only in SS mode). */
+#define EP_STS_SID_MASK GENMASK(15, 0)
+#define EP_STS_SID(p) ((p) & EP_STS_SID_MASK)
+
+/* EP_STS_EN - bitmasks */
+/* SETUP interrupt enable. */
+#define EP_STS_EN_SETUPEN BIT(0)
+/* OUT transfer missing descriptor enable. */
+#define EP_STS_EN_DESCMISEN BIT(4)
+/* Stream Rejected enable. */
+#define EP_STS_EN_STREAMREN BIT(5)
+/* Move Data Exit enable.*/
+#define EP_STS_EN_MD_EXITEN BIT(6)
+/* TRB enable. */
+#define EP_STS_EN_TRBERREN BIT(7)
+/* NRDY enable. */
+#define EP_STS_EN_NRDYEN BIT(8)
+/* Prime enable. */
+#define EP_STS_EN_PRIMEEEN BIT(12)
+/* Stream error enable. */
+#define EP_STS_EN_SIDERREN BIT(13)
+/* OUT size mismatch enable. */
+#define EP_STS_EN_OUTSMMEN BIT(14)
+/* ISO transmission error enable. */
+#define EP_STS_EN_ISOERREN BIT(15)
+/* Interrupt on Transmission complete enable. */
+#define EP_STS_EN_IOTEN BIT(19)
+/* Setup Wait interrupt enable. */
+#define EP_STS_EN_STPWAITEN BIT(31)
+
+/* DRBL- bitmasks */
+#define DB_VALUE_BY_INDEX(index) (1 << (index))
+#define DB_VALUE_EP0_OUT BIT(0)
+#define DB_VALUE_EP0_IN BIT(16)
+
+/* EP_IEN - bitmasks */
+#define EP_IEN(index) (1 << (index))
+#define EP_IEN_EP_OUT0 BIT(0)
+#define EP_IEN_EP_IN0 BIT(16)
+
+/* EP_ISTS - bitmasks */
+#define EP_ISTS(index) (1 << (index))
+#define EP_ISTS_EP_OUT0 BIT(0)
+#define EP_ISTS_EP_IN0 BIT(16)
+
+/* USB_PWR- bitmasks */
+/*Power Shut Off capability enable*/
+#define PUSB_PWR_PSO_EN BIT(0)
+/*Power Shut Off capability disable*/
+#define PUSB_PWR_PSO_DS BIT(1)
+/*
+ * Enables turning-off Reference Clock.
+ * This bit is optional and implemented only when support for OTG is
+ * implemented (indicated by OTG_READY bit set to '1').
+ */
+#define PUSB_PWR_STB_CLK_SWITCH_EN BIT(8)
+/*
+ * Status bit indicating that operation required by STB_CLK_SWITCH_EN write
+ * is completed
+ */
+#define PUSB_PWR_STB_CLK_SWITCH_DONE BIT(9)
+/* This bit informs if Fast Registers Access is enabled. */
+#define PUSB_PWR_FST_REG_ACCESS_STAT BIT(30)
+/* Fast Registers Access Enable. */
+#define PUSB_PWR_FST_REG_ACCESS BIT(31)
+
+/* USB_CONF2- bitmasks */
+/*
+ * Writing 1 disables TDL calculation basing on TRB feature in controller
+ * for DMULT mode.
+ * Bit supported only for DEV_VER_V2 version.
+ */
+#define USB_CONF2_DIS_TDL_TRB BIT(1)
+/*
+ * Writing 1 enables TDL calculation basing on TRB feature in controller
+ * for DMULT mode.
+ * Bit supported only for DEV_VER_V2 version.
+ */
+#define USB_CONF2_EN_TDL_TRB BIT(2)
+
+/* USB_CAP1- bitmasks */
+/*
+ * SFR Interface type
+ * These field reflects type of SFR interface implemented:
+ * 0x0 - OCP
+ * 0x1 - AHB,
+ * 0x2 - PLB
+ * 0x3 - AXI
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_SFR_TYPE_MASK GENMASK(3, 0)
+#define DEV_SFR_TYPE_OCP(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x0)
+#define DEV_SFR_TYPE_AHB(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x1)
+#define DEV_SFR_TYPE_PLB(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x2)
+#define DEV_SFR_TYPE_AXI(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x3)
+/*
+ * SFR Interface width
+ * These field reflects width of SFR interface implemented:
+ * 0x0 - 8 bit interface,
+ * 0x1 - 16 bit interface,
+ * 0x2 - 32 bit interface
+ * 0x3 - 64 bit interface
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_SFR_WIDTH_MASK GENMASK(7, 4)
+#define DEV_SFR_WIDTH_8(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x0 << 4))
+#define DEV_SFR_WIDTH_16(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x1 << 4))
+#define DEV_SFR_WIDTH_32(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x2 << 4))
+#define DEV_SFR_WIDTH_64(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x3 << 4))
+/*
+ * DMA Interface type
+ * These field reflects type of DMA interface implemented:
+ * 0x0 - OCP
+ * 0x1 - AHB,
+ * 0x2 - PLB
+ * 0x3 - AXI
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_DMA_TYPE_MASK GENMASK(11, 8)
+#define DEV_DMA_TYPE_OCP(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x0 << 8))
+#define DEV_DMA_TYPE_AHB(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x1 << 8))
+#define DEV_DMA_TYPE_PLB(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x2 << 8))
+#define DEV_DMA_TYPE_AXI(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x3 << 8))
+/*
+ * DMA Interface width
+ * These field reflects width of DMA interface implemented:
+ * 0x0 - reserved,
+ * 0x1 - reserved,
+ * 0x2 - 32 bit interface
+ * 0x3 - 64 bit interface
+ * 0x4-0xF - reserved
+ */
+#define USB_CAP1_DMA_WIDTH_MASK GENMASK(15, 12)
+#define DEV_DMA_WIDTH_32(p) (((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x2 << 12))
+#define DEV_DMA_WIDTH_64(p) (((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x3 << 12))
+/*
+ * USB3 PHY Interface type
+ * These field reflects type of USB3 PHY interface implemented:
+ * 0x0 - USB PIPE,
+ * 0x1 - RMMI,
+ * 0x2-0xF - reserved
+ */
+#define USB_CAP1_U3PHY_TYPE_MASK GENMASK(19, 16)
+#define DEV_U3PHY_PIPE(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x0 << 16))
+#define DEV_U3PHY_RMMI(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x1 << 16))
+/*
+ * USB3 PHY Interface width
+ * These field reflects width of USB3 PHY interface implemented:
+ * 0x0 - 8 bit PIPE interface,
+ * 0x1 - 16 bit PIPE interface,
+ * 0x2 - 32 bit PIPE interface,
+ * 0x3 - 64 bit PIPE interface
+ * 0x4-0xF - reserved
+ * Note: When SSIC interface is implemented this field shows the width of
+ * internal PIPE interface. The RMMI interface is always 20bit wide.
+ */
+#define USB_CAP1_U3PHY_WIDTH_MASK GENMASK(23, 20)
+#define DEV_U3PHY_WIDTH_8(p) \
+ (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x0 << 20))
+#define DEV_U3PHY_WIDTH_16(p) \
+ (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x1 << 16))
+#define DEV_U3PHY_WIDTH_32(p) \
+ (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x2 << 20))
+#define DEV_U3PHY_WIDTH_64(p) \
+ (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x3 << 16))
+
+/*
+ * USB2 PHY Interface enable
+ * These field informs if USB2 PHY interface is implemented:
+ * 0x0 - interface NOT implemented,
+ * 0x1 - interface implemented
+ */
+#define USB_CAP1_U2PHY_EN(p) ((p) & BIT(24))
+/*
+ * USB2 PHY Interface type
+ * These field reflects type of USB2 PHY interface implemented:
+ * 0x0 - UTMI,
+ * 0x1 - ULPI
+ */
+#define DEV_U2PHY_ULPI(p) ((p) & BIT(25))
+/*
+ * USB2 PHY Interface width
+ * These field reflects width of USB2 PHY interface implemented:
+ * 0x0 - 8 bit interface,
+ * 0x1 - 16 bit interface,
+ * Note: The ULPI interface is always 8bit wide.
+ */
+#define DEV_U2PHY_WIDTH_16(p) ((p) & BIT(26))
+/*
+ * OTG Ready
+ * 0x0 - pure device mode
+ * 0x1 - some features and ports for CDNS USB OTG controller are implemented.
+ */
+#define USB_CAP1_OTG_READY(p) ((p) & BIT(27))
+
+/*
+ * When set, indicates that controller supports automatic internal TDL
+ * calculation basing on the size provided in TRB (TRB[22:17]) for DMULT mode
+ * Supported only for DEV_VER_V2 controller version.
+ */
+#define USB_CAP1_TDL_FROM_TRB(p) ((p) & BIT(28))
+
+/* USB_CAP2- bitmasks */
+/*
+ * The actual size of the connected On-chip RAM memory in kB:
+ * - 0 means 256 kB (max supported mem size)
+ * - value other than 0 reflects the mem size in kB
+ */
+#define USB_CAP2_ACTUAL_MEM_SIZE(p) ((p) & GENMASK(7, 0))
+/*
+ * Max supported mem size
+ * These field reflects width of on-chip RAM address bus width,
+ * which determines max supported mem size:
+ * 0x0-0x7 - reserved,
+ * 0x8 - support for 4kB mem,
+ * 0x9 - support for 8kB mem,
+ * 0xA - support for 16kB mem,
+ * 0xB - support for 32kB mem,
+ * 0xC - support for 64kB mem,
+ * 0xD - support for 128kB mem,
+ * 0xE - support for 256kB mem,
+ * 0xF - reserved
+ */
+#define USB_CAP2_MAX_MEM_SIZE(p) ((p) & GENMASK(11, 8))
+
+/* USB_CAP3- bitmasks */
+#define EP_IS_IMPLEMENTED(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP4- bitmasks */
+#define EP_SUPPORT_ISO(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP5- bitmasks */
+#define EP_SUPPORT_STREAM(reg, index) ((reg) & (1 << (index)))
+
+/* USB_CAP6- bitmasks */
+/* The USBSS-DEV Controller Internal build number. */
+#define GET_DEV_BASE_VERSION(p) ((p) & GENMASK(23, 0))
+/* The USBSS-DEV Controller version number. */
+#define GET_DEV_CUSTOM_VERSION(p) ((p) & GENMASK(31, 24))
+
+#define DEV_VER_NXP_V1 0x00024502
+#define DEV_VER_TI_V1 0x00024509
+#define DEV_VER_V2 0x0002450C
+#define DEV_VER_V3 0x0002450d
+
+/* DBG_LINK1- bitmasks */
+/*
+ * LFPS_MIN_DET_U1_EXIT value This parameter configures the minimum
+ * time required for decoding the received LFPS as an LFPS.U1_Exit.
+ */
+#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT(p) ((p) & GENMASK(7, 0))
+/*
+ * LFPS_MIN_GEN_U1_EXIT value This parameter configures the minimum time for
+ * phytxelecidle deassertion when LFPS.U1_Exit
+ */
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK GENMASK(15, 8)
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(p) (((p) << 8) & GENMASK(15, 8))
+/*
+ * RXDET_BREAK_DIS value This parameter configures terminating the Far-end
+ * Receiver termination detection sequence:
+ * 0: it is possible that USBSS_DEV will terminate Farend receiver
+ * termination detection sequence
+ * 1: USBSS_DEV will not terminate Far-end receiver termination
+ * detection sequence
+ */
+#define DBG_LINK1_RXDET_BREAK_DIS BIT(16)
+/* LFPS_GEN_PING value This parameter configures the LFPS.Ping generation */
+#define DBG_LINK1_LFPS_GEN_PING(p) (((p) << 17) & GENMASK(21, 17))
+/*
+ * Set the LFPS_MIN_DET_U1_EXIT value Writing '1' to this bit writes the
+ * LFPS_MIN_DET_U1_EXIT field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT_SET BIT(24)
+/*
+ * Set the LFPS_MIN_GEN_U1_EXIT value. Writing '1' to this bit writes the
+ * LFPS_MIN_GEN_U1_EXIT field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET BIT(25)
+/*
+ * Set the RXDET_BREAK_DIS value Writing '1' to this bit writes
+ * the RXDET_BREAK_DIS field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect
+ */
+#define DBG_LINK1_RXDET_BREAK_DIS_SET BIT(26)
+/*
+ * Set the LFPS_GEN_PING_SET value Writing '1' to this bit writes
+ * the LFPS_GEN_PING field value to the device. This bit is automatically
+ * cleared. Writing '0' has no effect."
+ */
+#define DBG_LINK1_LFPS_GEN_PING_SET BIT(27)
+
+/* DMA_AXI_CTRL- bitmasks */
+/* The mawprot pin configuration. */
+#define DMA_AXI_CTRL_MARPROT(p) ((p) & GENMASK(2, 0))
+/* The marprot pin configuration. */
+#define DMA_AXI_CTRL_MAWPROT(p) (((p) & GENMASK(2, 0)) << 16)
+#define DMA_AXI_CTRL_NON_SECURE 0x02
+
+#define gadget_to_cdns3_device(g) (container_of(g, struct cdns3_device, gadget))
+
+#define ep_to_cdns3_ep(ep) (container_of(ep, struct cdns3_endpoint, endpoint))
+
+/*-------------------------------------------------------------------------*/
+/*
+ * USBSS-DEV DMA interface.
+ */
+#define TRBS_PER_SEGMENT 40
+
+#define ISO_MAX_INTERVAL 10
+
+#if TRBS_PER_SEGMENT < 2
+#error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2."
+#endif
+
+/*
+ *Only for ISOC endpoints - maximum number of TRBs is calculated as
+ * pow(2, bInterval-1) * number of usb requests. It is limitation made by
+ * driver to save memory. Controller must prepare TRB for each ITP even
+ * if bInterval > 1. It's the reason why driver needs so many TRBs for
+ * isochronous endpoints.
+ */
+#define TRBS_PER_ISOC_SEGMENT (ISO_MAX_INTERVAL * 8)
+
+#define GET_TRBS_PER_SEGMENT(ep_type) ((ep_type) == USB_ENDPOINT_XFER_ISOC ? \
+ TRBS_PER_ISOC_SEGMENT : TRBS_PER_SEGMENT)
+/**
+ * struct cdns3_trb - represent Transfer Descriptor block.
+ * @buffer: pointer to buffer data
+ * @length: length of data
+ * @control: control flags.
+ *
+ * This structure describes transfer block serviced by DMA module.
+ */
+struct cdns3_trb {
+ __le32 buffer;
+ __le32 length;
+ __le32 control;
+};
+
+#define TRB_SIZE (sizeof(struct cdns3_trb))
+#define TRB_RING_SIZE (TRB_SIZE * TRBS_PER_SEGMENT)
+#define TRB_ISO_RING_SIZE (TRB_SIZE * TRBS_PER_ISOC_SEGMENT)
+#define TRB_CTRL_RING_SIZE (TRB_SIZE * 2)
+
+/* TRB bit mask */
+#define TRB_TYPE_BITMASK GENMASK(15, 10)
+#define TRB_TYPE(p) ((p) << 10)
+#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
+
+/* TRB type IDs */
+/* bulk, interrupt, isoc , and control data stage */
+#define TRB_NORMAL 1
+/* TRB for linking ring segments */
+#define TRB_LINK 6
+
+/* Cycle bit - indicates TRB ownership by driver or hw*/
+#define TRB_CYCLE BIT(0)
+/*
+ * When set to '1', the device will toggle its interpretation of the Cycle bit
+ */
+#define TRB_TOGGLE BIT(1)
+
+/*
+ * Short Packet (SP). OUT EPs at DMULT=1 only. Indicates if the TRB was
+ * processed while USB short packet was received. No more buffers defined by
+ * the TD will be used. DMA will automatically advance to next TD.
+ * - Shall be set to 0 by Software when putting TRB on the Transfer Ring
+ * - Shall be set to 1 by Controller when Short Packet condition for this TRB
+ * is detected independent if ISP is set or not.
+ */
+#define TRB_SP BIT(1)
+
+/* Interrupt on short packet*/
+#define TRB_ISP BIT(2)
+/*Setting this bit enables FIFO DMA operation mode*/
+#define TRB_FIFO_MODE BIT(3)
+/* Set PCIe no snoop attribute */
+#define TRB_CHAIN BIT(4)
+/* Interrupt on completion */
+#define TRB_IOC BIT(5)
+
+/* stream ID bitmasks. */
+#define TRB_STREAM_ID_BITMASK GENMASK(31, 16)
+#define TRB_STREAM_ID(p) ((p) << 16)
+#define TRB_FIELD_TO_STREAMID(p) (((p) & TRB_STREAM_ID_BITMASK) >> 16)
+
+/* Size of TD expressed in USB packets for HS/FS mode. */
+#define TRB_TDL_HS_SIZE(p) (((p) << 16) & GENMASK(31, 16))
+#define TRB_TDL_HS_SIZE_GET(p) (((p) & GENMASK(31, 16)) >> 16)
+
+/* transfer_len bitmasks. */
+#define TRB_LEN(p) ((p) & GENMASK(16, 0))
+
+/* Size of TD expressed in USB packets for SS mode. */
+#define TRB_TDL_SS_SIZE(p) (((p) << 17) & GENMASK(23, 17))
+#define TRB_TDL_SS_SIZE_GET(p) (((p) & GENMASK(23, 17)) >> 17)
+
+/* transfer_len bitmasks - bits 31:24 */
+#define TRB_BURST_LEN(p) (((p) << 24) & GENMASK(31, 24))
+#define TRB_BURST_LEN_GET(p) (((p) & GENMASK(31, 24)) >> 24)
+
+/* Data buffer pointer bitmasks*/
+#define TRB_BUFFER(p) ((p) & GENMASK(31, 0))
+
+/*-------------------------------------------------------------------------*/
+/* Driver numeric constants */
+
+/* Such declaration should be added to ch9.h */
+#define USB_DEVICE_MAX_ADDRESS 127
+
+/* Endpoint init values */
+#define CDNS3_EP_MAX_PACKET_LIMIT 1024
+#define CDNS3_EP_MAX_STREAMS 15
+#define CDNS3_EP0_MAX_PACKET_LIMIT 512
+
+/* All endpoints including EP0 */
+#define CDNS3_ENDPOINTS_MAX_COUNT 32
+#define CDNS3_EP_ZLP_BUF_SIZE 1024
+
+#define CDNS3_EP_BUF_SIZE 2 /* KB */
+#define CDNS3_EP_ISO_HS_MULT 3
+#define CDNS3_EP_ISO_SS_BURST 3
+#define CDNS3_MAX_NUM_DESCMISS_BUF 32
+#define CDNS3_DESCMIS_BUF_SIZE 2048 /* Bytes */
+#define CDNS3_WA2_NUM_BUFFERS 128
+/*-------------------------------------------------------------------------*/
+/* Used structs */
+
+struct cdns3_device;
+
+/**
+ * struct cdns3_endpoint - extended device side representation of USB endpoint.
+ * @endpoint: usb endpoint
+ * @pending_req_list: list of requests queuing on transfer ring.
+ * @deferred_req_list: list of requests waiting for queuing on transfer ring.
+ * @wa2_descmiss_req_list: list of requests internally allocated by driver.
+ * @trb_pool: transfer ring - array of transaction buffers
+ * @trb_pool_dma: dma address of transfer ring
+ * @cdns3_dev: device associated with this endpoint
+ * @name: a human readable name e.g. ep1out
+ * @flags: specify the current state of endpoint
+ * @descmis_req: internal transfer object used for getting data from on-chip
+ * buffer. It can happen only if function driver doesn't send usb_request
+ * object on time.
+ * @dir: endpoint direction
+ * @num: endpoint number (1 - 15)
+ * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
+ * @interval: interval between packets used for ISOC endpoint.
+ * @free_trbs: number of free TRBs in transfer ring
+ * @num_trbs: number of all TRBs in transfer ring
+ * @pcs: producer cycle state
+ * @ccs: consumer cycle state
+ * @enqueue: enqueue index in transfer ring
+ * @dequeue: dequeue index in transfer ring
+ * @trb_burst_size: number of burst used in trb.
+ */
+struct cdns3_endpoint {
+ struct usb_ep endpoint;
+ struct list_head pending_req_list;
+ struct list_head deferred_req_list;
+ struct list_head wa2_descmiss_req_list;
+ int wa2_counter;
+
+ struct cdns3_trb *trb_pool;
+ dma_addr_t trb_pool_dma;
+
+ struct cdns3_device *cdns3_dev;
+ char name[20];
+
+#define EP_ENABLED BIT(0)
+#define EP_STALLED BIT(1)
+#define EP_STALL_PENDING BIT(2)
+#define EP_WEDGE BIT(3)
+#define EP_TRANSFER_STARTED BIT(4)
+#define EP_UPDATE_EP_TRBADDR BIT(5)
+#define EP_PENDING_REQUEST BIT(6)
+#define EP_RING_FULL BIT(7)
+#define EP_CLAIMED BIT(8)
+#define EP_DEFERRED_DRDY BIT(9)
+#define EP_QUIRK_ISO_OUT_EN BIT(10)
+#define EP_QUIRK_END_TRANSFER BIT(11)
+#define EP_QUIRK_EXTRA_BUF_DET BIT(12)
+#define EP_QUIRK_EXTRA_BUF_EN BIT(13)
+ u32 flags;
+
+ struct cdns3_request *descmis_req;
+
+ u8 dir;
+ u8 num;
+ u8 type;
+ int interval;
+
+ int free_trbs;
+ int num_trbs;
+ u8 pcs;
+ u8 ccs;
+ int enqueue;
+ int dequeue;
+ u8 trb_burst_size;
+
+ unsigned int wa1_set:1;
+ struct cdns3_trb *wa1_trb;
+ unsigned int wa1_trb_index;
+ unsigned int wa1_cycle_bit:1;
+};
+
+/**
+ * struct cdns3_aligned_buf - represent aligned buffer used for DMA transfer
+ * @buf: aligned to 8 bytes data buffer. Buffer address used in
+ * TRB shall be aligned to 8.
+ * @dma: dma address
+ * @size: size of buffer
+ * @in_use: inform if this buffer is associated with usb_request
+ * @list: used to adding instance of this object to list
+ */
+struct cdns3_aligned_buf {
+ void *buf;
+ dma_addr_t dma;
+ u32 size;
+ int in_use:1;
+ struct list_head list;
+};
+
+/**
+ * struct cdns3_request - extended device side representation of usb_request
+ * object .
+ * @request: generic usb_request object describing single I/O request.
+ * @priv_ep: extended representation of usb_ep object
+ * @trb: the first TRB association with this request
+ * @start_trb: number of the first TRB in transfer ring
+ * @end_trb: number of the last TRB in transfer ring
+ * @aligned_buf: object holds information about aligned buffer associated whit
+ * this endpoint
+ * @flags: flag specifying special usage of request
+ * @list: used by internally allocated request to add to wa2_descmiss_req_list.
+ */
+struct cdns3_request {
+ struct usb_request request;
+ struct cdns3_endpoint *priv_ep;
+ struct cdns3_trb *trb;
+ int start_trb;
+ int end_trb;
+ struct cdns3_aligned_buf *aligned_buf;
+#define REQUEST_PENDING BIT(0)
+#define REQUEST_INTERNAL BIT(1)
+#define REQUEST_INTERNAL_CH BIT(2)
+#define REQUEST_ZLP BIT(3)
+#define REQUEST_UNALIGNED BIT(4)
+ u32 flags;
+ struct list_head list;
+};
+
+#define to_cdns3_request(r) (container_of(r, struct cdns3_request, request))
+
+/*Stages used during enumeration process.*/
+#define CDNS3_SETUP_STAGE 0x0
+#define CDNS3_DATA_STAGE 0x1
+#define CDNS3_STATUS_STAGE 0x2
+
+/**
+ * struct cdns3_device - represent USB device.
+ * @dev: pointer to device structure associated whit this controller
+ * @sysdev: pointer to the DMA capable device
+ * @gadget: device side representation of the peripheral controller
+ * @gadget_driver: pointer to the gadget driver
+ * @dev_ver: device controller version.
+ * @lock: for synchronizing
+ * @regs: base address for device side registers
+ * @setup_buf: used while processing usb control requests
+ * @setup_dma: dma address for setup_buf
+ * @zlp_buf - zlp buffer
+ * @ep0_stage: ep0 stage during enumeration process.
+ * @ep0_data_dir: direction for control transfer
+ * @eps: array of pointers to all endpoints with exclusion ep0
+ * @aligned_buf_list: list of aligned buffers internally allocated by driver
+ * @aligned_buf_wq: workqueue freeing no longer used aligned buf.
+ * @selected_ep: actually selected endpoint. It's used only to improve
+ * performance.
+ * @isoch_delay: value from Set Isoch Delay request. Only valid on SS/SSP.
+ * @u1_allowed: allow device transition to u1 state
+ * @u2_allowed: allow device transition to u2 state
+ * @is_selfpowered: device is self powered
+ * @setup_pending: setup packet is processing by gadget driver
+ * @hw_configured_flag: hardware endpoint configuration was set.
+ * @wake_up_flag: allow device to remote up the host
+ * @status_completion_no_call: indicate that driver is waiting for status s
+ * stage completion. It's used in deferred SET_CONFIGURATION request.
+ * @onchip_buffers: number of available on-chip buffers.
+ * @onchip_used_size: actual size of on-chip memory assigned to endpoints.
+ * @pending_status_wq: workqueue handling status stage for deferred requests.
+ * @pending_status_request: request for which status stage was deferred
+ */
+struct cdns3_device {
+ struct device *dev;
+ struct device *sysdev;
+
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *gadget_driver;
+
+#define CDNS_REVISION_V0 0x00024501
+#define CDNS_REVISION_V1 0x00024509
+ u32 dev_ver;
+
+ /* generic spin-lock for drivers */
+ spinlock_t lock;
+
+ struct cdns3_usb_regs __iomem *regs;
+
+ struct usb_ctrlrequest *setup_buf;
+ dma_addr_t setup_dma;
+ void *zlp_buf;
+
+ u8 ep0_stage;
+ int ep0_data_dir;
+
+ struct cdns3_endpoint *eps[CDNS3_ENDPOINTS_MAX_COUNT];
+
+ struct list_head aligned_buf_list;
+ struct work_struct aligned_buf_wq;
+
+ u32 selected_ep;
+ u16 isoch_delay;
+
+ unsigned wait_for_setup:1;
+ unsigned u1_allowed:1;
+ unsigned u2_allowed:1;
+ unsigned is_selfpowered:1;
+ unsigned setup_pending:1;
+ int hw_configured_flag:1;
+ int wake_up_flag:1;
+ unsigned status_completion_no_call:1;
+ int out_mem_is_allocated;
+
+ struct work_struct pending_status_wq;
+ struct usb_request *pending_status_request;
+
+ /*in KB */
+ u16 onchip_buffers;
+ u16 onchip_used_size;
+};
+
+void cdns3_set_register_bit(void __iomem *ptr, u32 mask);
+dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
+ struct cdns3_trb *trb);
+enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev);
+void cdns3_pending_setup_status_handler(struct work_struct *work);
+void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev);
+void cdns3_set_hw_configuration(struct cdns3_device *priv_dev);
+void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep);
+void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable);
+struct usb_request *cdns3_next_request(struct list_head *list);
+int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
+ struct usb_request *request);
+void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm);
+int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep);
+u8 cdns3_ep_addr_to_index(u8 ep_addr);
+int cdns3_gadget_ep_set_wedge(struct usb_ep *ep);
+int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value);
+void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep);
+int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep);
+struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
+ gfp_t gfp_flags);
+void cdns3_gadget_ep_free_request(struct usb_ep *ep,
+ struct usb_request *request);
+int cdns3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request);
+void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
+ struct cdns3_request *priv_req,
+ int status);
+
+int cdns3_init_ep0(struct cdns3_device *priv_dev,
+ struct cdns3_endpoint *priv_ep);
+void cdns3_ep0_config(struct cdns3_device *priv_dev);
+void cdns3_ep_config(struct cdns3_endpoint *priv_ep);
+void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir);
+int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev);
+
+#endif /* __LINUX_CDNS3_GADGET */
diff --git a/drivers/usb/cdns3/host-export.h b/drivers/usb/cdns3/host-export.h
new file mode 100644
index 000000000000..b498a170b7e8
--- /dev/null
+++ b/drivers/usb/cdns3/host-export.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Cadence USBSS DRD Driver - Host Export APIs
+ *
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ */
+#ifndef __LINUX_CDNS3_HOST_EXPORT
+#define __LINUX_CDNS3_HOST_EXPORT
+
+#ifdef CONFIG_USB_CDNS3_HOST
+
+int cdns3_host_init(struct cdns3 *cdns);
+void cdns3_host_exit(struct cdns3 *cdns);
+
+#else
+
+static inline int cdns3_host_init(struct cdns3 *cdns)
+{
+ return -ENXIO;
+}
+
+static inline void cdns3_host_exit(struct cdns3 *cdns) { }
+
+#endif /* CONFIG_USB_CDNS3_HOST */
+
+#endif /* __LINUX_CDNS3_HOST_EXPORT */
diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
new file mode 100644
index 000000000000..2733a8f71fcd
--- /dev/null
+++ b/drivers/usb/cdns3/host.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence USBSS DRD Driver - host side
+ *
+ * Copyright (C) 2018-2019 Cadence Design Systems.
+ * Copyright (C) 2017-2018 NXP
+ *
+ * Authors: Peter Chen <peter.chen@nxp.com>
+ * Pawel Laszczak <pawell@cadence.com>
+ */
+
+#include <linux/platform_device.h>
+#include "core.h"
+#include "drd.h"
+
+static int __cdns3_host_init(struct cdns3 *cdns)
+{
+ struct platform_device *xhci;
+ int ret;
+
+ cdns3_drd_switch_host(cdns, 1);
+
+ xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
+ if (!xhci) {
+ dev_err(cdns->dev, "couldn't allocate xHCI device\n");
+ return -ENOMEM;
+ }
+
+ xhci->dev.parent = cdns->dev;
+ cdns->host_dev = xhci;
+
+ ret = platform_device_add_resources(xhci, cdns->xhci_res,
+ CDNS3_XHCI_RESOURCES_NUM);
+ if (ret) {
+ dev_err(cdns->dev, "couldn't add resources to xHCI device\n");
+ goto err1;
+ }
+
+ ret = platform_device_add(xhci);
+ if (ret) {
+ dev_err(cdns->dev, "failed to register xHCI device\n");
+ goto err1;
+ }
+
+ return 0;
+err1:
+ platform_device_put(xhci);
+ return ret;
+}
+
+static void cdns3_host_exit(struct cdns3 *cdns)
+{
+ platform_device_unregister(cdns->host_dev);
+ cdns->host_dev = NULL;
+ cdns3_drd_switch_host(cdns, 0);
+}
+
+int cdns3_host_init(struct cdns3 *cdns)
+{
+ struct cdns3_role_driver *rdrv;
+
+ rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
+ if (!rdrv)
+ return -ENOMEM;
+
+ rdrv->start = __cdns3_host_init;
+ rdrv->stop = cdns3_host_exit;
+ rdrv->state = CDNS3_ROLE_STATE_INACTIVE;
+ rdrv->name = "host";
+
+ cdns->roles[USB_ROLE_HOST] = rdrv;
+
+ return 0;
+}
diff --git a/drivers/usb/cdns3/trace.c b/drivers/usb/cdns3/trace.c
new file mode 100644
index 000000000000..459fa72d9c74
--- /dev/null
+++ b/drivers/usb/cdns3/trace.c
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USBSS device controller driver Trace Support
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h
new file mode 100644
index 000000000000..e92348c9b4d7
--- /dev/null
+++ b/drivers/usb/cdns3/trace.h
@@ -0,0 +1,493 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * USBSS device controller driver.
+ * Trace support header file.
+ *
+ * Copyright (C) 2018-2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@cadence.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cdns3
+
+#if !defined(__LINUX_CDNS3_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define __LINUX_CDNS3_TRACE
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <asm/byteorder.h>
+#include <linux/usb/ch9.h>
+#include "core.h"
+#include "gadget.h"
+#include "debug.h"
+
+#define CDNS3_MSG_MAX 500
+
+TRACE_EVENT(cdns3_halt,
+ TP_PROTO(struct cdns3_endpoint *ep_priv, u8 halt, u8 flush),
+ TP_ARGS(ep_priv, halt, flush),
+ TP_STRUCT__entry(
+ __string(name, ep_priv->name)
+ __field(u8, halt)
+ __field(u8, flush)
+ ),
+ TP_fast_assign(
+ __assign_str(name, ep_priv->name);
+ __entry->halt = halt;
+ __entry->flush = flush;
+ ),
+ TP_printk("Halt %s for %s: %s", __entry->flush ? " and flush" : "",
+ __get_str(name), __entry->halt ? "set" : "cleared")
+);
+
+TRACE_EVENT(cdns3_wa1,
+ TP_PROTO(struct cdns3_endpoint *ep_priv, char *msg),
+ TP_ARGS(ep_priv, msg),
+ TP_STRUCT__entry(
+ __string(ep_name, ep_priv->name)
+ __string(msg, msg)
+ ),
+ TP_fast_assign(
+ __assign_str(ep_name, ep_priv->name);
+ __assign_str(msg, msg);
+ ),
+ TP_printk("WA1: %s %s", __get_str(ep_name), __get_str(msg))
+);
+
+TRACE_EVENT(cdns3_wa2,
+ TP_PROTO(struct cdns3_endpoint *ep_priv, char *msg),
+ TP_ARGS(ep_priv, msg),
+ TP_STRUCT__entry(
+ __string(ep_name, ep_priv->name)
+ __string(msg, msg)
+ ),
+ TP_fast_assign(
+ __assign_str(ep_name, ep_priv->name);
+ __assign_str(msg, msg);
+ ),
+ TP_printk("WA2: %s %s", __get_str(ep_name), __get_str(msg))
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_doorbell,
+ TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+ TP_ARGS(ep_name, ep_trbaddr),
+ TP_STRUCT__entry(
+ __string(name, ep_name)
+ __field(u32, ep_trbaddr)
+ ),
+ TP_fast_assign(
+ __assign_str(name, ep_name);
+ __entry->ep_trbaddr = ep_trbaddr;
+ ),
+ TP_printk("%s, ep_trbaddr %08x", __get_str(name),
+ __entry->ep_trbaddr)
+);
+
+DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_ep0,
+ TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+ TP_ARGS(ep_name, ep_trbaddr)
+);
+
+DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_epx,
+ TP_PROTO(const char *ep_name, u32 ep_trbaddr),
+ TP_ARGS(ep_name, ep_trbaddr)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_usb_irq,
+ TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists),
+ TP_ARGS(priv_dev, usb_ists),
+ TP_STRUCT__entry(
+ __field(enum usb_device_speed, speed)
+ __field(u32, usb_ists)
+ __dynamic_array(char, str, CDNS3_MSG_MAX)
+ ),
+ TP_fast_assign(
+ __entry->speed = cdns3_get_speed(priv_dev);
+ __entry->usb_ists = usb_ists;
+ ),
+ TP_printk("%s", cdns3_decode_usb_irq(__get_str(str), __entry->speed,
+ __entry->usb_ists))
+);
+
+DEFINE_EVENT(cdns3_log_usb_irq, cdns3_usb_irq,
+ TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists),
+ TP_ARGS(priv_dev, usb_ists)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_epx_irq,
+ TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep),
+ TP_ARGS(priv_dev, priv_ep),
+ TP_STRUCT__entry(
+ __string(ep_name, priv_ep->name)
+ __field(u32, ep_sts)
+ __field(u32, ep_traddr)
+ __dynamic_array(char, str, CDNS3_MSG_MAX)
+ ),
+ TP_fast_assign(
+ __assign_str(ep_name, priv_ep->name);
+ __entry->ep_sts = readl(&priv_dev->regs->ep_sts);
+ __entry->ep_traddr = readl(&priv_dev->regs->ep_traddr);
+ ),
+ TP_printk("%s, ep_traddr: %08x",
+ cdns3_decode_epx_irq(__get_str(str),
+ __get_str(ep_name),
+ __entry->ep_sts),
+ __entry->ep_traddr)
+);
+
+DEFINE_EVENT(cdns3_log_epx_irq, cdns3_epx_irq,
+ TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep),
+ TP_ARGS(priv_dev, priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ep0_irq,
+ TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts),
+ TP_ARGS(priv_dev, ep_sts),
+ TP_STRUCT__entry(
+ __field(int, ep_dir)
+ __field(u32, ep_sts)
+ __dynamic_array(char, str, CDNS3_MSG_MAX)
+ ),
+ TP_fast_assign(
+ __entry->ep_dir = priv_dev->ep0_data_dir;
+ __entry->ep_sts = ep_sts;
+ ),
+ TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str),
+ __entry->ep_dir,
+ __entry->ep_sts))
+);
+
+DEFINE_EVENT(cdns3_log_ep0_irq, cdns3_ep0_irq,
+ TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts),
+ TP_ARGS(priv_dev, ep_sts)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ctrl,
+ TP_PROTO(struct usb_ctrlrequest *ctrl),
+ TP_ARGS(ctrl),
+ TP_STRUCT__entry(
+ __field(u8, bRequestType)
+ __field(u8, bRequest)
+ __field(u16, wValue)
+ __field(u16, wIndex)
+ __field(u16, wLength)
+ __dynamic_array(char, str, CDNS3_MSG_MAX)
+ ),
+ TP_fast_assign(
+ __entry->bRequestType = ctrl->bRequestType;
+ __entry->bRequest = ctrl->bRequest;
+ __entry->wValue = le16_to_cpu(ctrl->wValue);
+ __entry->wIndex = le16_to_cpu(ctrl->wIndex);
+ __entry->wLength = le16_to_cpu(ctrl->wLength);
+ ),
+ TP_printk("%s", usb_decode_ctrl(__get_str(str), CDNS3_MSG_MAX,
+ __entry->bRequestType,
+ __entry->bRequest, __entry->wValue,
+ __entry->wIndex, __entry->wLength)
+ )
+);
+
+DEFINE_EVENT(cdns3_log_ctrl, cdns3_ctrl_req,
+ TP_PROTO(struct usb_ctrlrequest *ctrl),
+ TP_ARGS(ctrl)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_request,
+ TP_PROTO(struct cdns3_request *req),
+ TP_ARGS(req),
+ TP_STRUCT__entry(
+ __string(name, req->priv_ep->name)
+ __field(struct cdns3_request *, req)
+ __field(void *, buf)
+ __field(unsigned int, actual)
+ __field(unsigned int, length)
+ __field(int, status)
+ __field(int, zero)
+ __field(int, short_not_ok)
+ __field(int, no_interrupt)
+ __field(int, start_trb)
+ __field(int, end_trb)
+ __field(struct cdns3_trb *, start_trb_addr)
+ __field(int, flags)
+ ),
+ TP_fast_assign(
+ __assign_str(name, req->priv_ep->name);
+ __entry->req = req;
+ __entry->buf = req->request.buf;
+ __entry->actual = req->request.actual;
+ __entry->length = req->request.length;
+ __entry->status = req->request.status;
+ __entry->zero = req->request.zero;
+ __entry->short_not_ok = req->request.short_not_ok;
+ __entry->no_interrupt = req->request.no_interrupt;
+ __entry->start_trb = req->start_trb;
+ __entry->end_trb = req->end_trb;
+ __entry->start_trb_addr = req->trb;
+ __entry->flags = req->flags;
+ ),
+ TP_printk("%s: req: %p, req buff %p, length: %u/%u %s%s%s, status: %d,"
+ " trb: [start:%d, end:%d: virt addr %pa], flags:%x ",
+ __get_str(name), __entry->req, __entry->buf, __entry->actual,
+ __entry->length,
+ __entry->zero ? "Z" : "z",
+ __entry->short_not_ok ? "S" : "s",
+ __entry->no_interrupt ? "I" : "i",
+ __entry->status,
+ __entry->start_trb,
+ __entry->end_trb,
+ __entry->start_trb_addr,
+ __entry->flags
+ )
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_alloc_request,
+ TP_PROTO(struct cdns3_request *req),
+ TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_free_request,
+ TP_PROTO(struct cdns3_request *req),
+ TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_ep_queue,
+ TP_PROTO(struct cdns3_request *req),
+ TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_ep_dequeue,
+ TP_PROTO(struct cdns3_request *req),
+ TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_request, cdns3_gadget_giveback,
+ TP_PROTO(struct cdns3_request *req),
+ TP_ARGS(req)
+);
+
+TRACE_EVENT(cdns3_ep0_queue,
+ TP_PROTO(struct cdns3_device *dev_priv, struct usb_request *request),
+ TP_ARGS(dev_priv, request),
+ TP_STRUCT__entry(
+ __field(int, dir)
+ __field(int, length)
+ ),
+ TP_fast_assign(
+ __entry->dir = dev_priv->ep0_data_dir;
+ __entry->length = request->length;
+ ),
+ TP_printk("Queue to ep0%s length: %u", __entry->dir ? "in" : "out",
+ __entry->length)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_aligned_request,
+ TP_PROTO(struct cdns3_request *priv_req),
+ TP_ARGS(priv_req),
+ TP_STRUCT__entry(
+ __string(name, priv_req->priv_ep->name)
+ __field(struct usb_request *, req)
+ __field(void *, buf)
+ __field(dma_addr_t, dma)
+ __field(void *, aligned_buf)
+ __field(dma_addr_t, aligned_dma)
+ __field(u32, aligned_buf_size)
+ ),
+ TP_fast_assign(
+ __assign_str(name, priv_req->priv_ep->name);
+ __entry->req = &priv_req->request;
+ __entry->buf = priv_req->request.buf;
+ __entry->dma = priv_req->request.dma;
+ __entry->aligned_buf = priv_req->aligned_buf->buf;
+ __entry->aligned_dma = priv_req->aligned_buf->dma;
+ __entry->aligned_buf_size = priv_req->aligned_buf->size;
+ ),
+ TP_printk("%s: req: %p, req buf %p, dma %pad a_buf %p a_dma %pad, size %d",
+ __get_str(name), __entry->req, __entry->buf, &__entry->dma,
+ __entry->aligned_buf, &__entry->aligned_dma,
+ __entry->aligned_buf_size
+ )
+);
+
+DEFINE_EVENT(cdns3_log_aligned_request, cdns3_free_aligned_request,
+ TP_PROTO(struct cdns3_request *req),
+ TP_ARGS(req)
+);
+
+DEFINE_EVENT(cdns3_log_aligned_request, cdns3_prepare_aligned_request,
+ TP_PROTO(struct cdns3_request *req),
+ TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_trb,
+ TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+ TP_ARGS(priv_ep, trb),
+ TP_STRUCT__entry(
+ __string(name, priv_ep->name)
+ __field(struct cdns3_trb *, trb)
+ __field(u32, buffer)
+ __field(u32, length)
+ __field(u32, control)
+ __field(u32, type)
+ ),
+ TP_fast_assign(
+ __assign_str(name, priv_ep->name);
+ __entry->trb = trb;
+ __entry->buffer = trb->buffer;
+ __entry->length = trb->length;
+ __entry->control = trb->control;
+ __entry->type = usb_endpoint_type(priv_ep->endpoint.desc);
+ ),
+ TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s)",
+ __get_str(name), __entry->trb, __entry->buffer,
+ TRB_LEN(__entry->length),
+ (u8)TRB_BURST_LEN_GET(__entry->length),
+ __entry->control,
+ __entry->control & TRB_CYCLE ? "C=1, " : "C=0, ",
+ __entry->control & TRB_TOGGLE ? "T=1, " : "T=0, ",
+ __entry->control & TRB_ISP ? "ISP, " : "",
+ __entry->control & TRB_FIFO_MODE ? "FIFO, " : "",
+ __entry->control & TRB_CHAIN ? "CHAIN, " : "",
+ __entry->control & TRB_IOC ? "IOC, " : "",
+ TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK"
+ )
+);
+
+DEFINE_EVENT(cdns3_log_trb, cdns3_prepare_trb,
+ TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+ TP_ARGS(priv_ep, trb)
+);
+
+DEFINE_EVENT(cdns3_log_trb, cdns3_complete_trb,
+ TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb),
+ TP_ARGS(priv_ep, trb)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ring,
+ TP_PROTO(struct cdns3_endpoint *priv_ep),
+ TP_ARGS(priv_ep),
+ TP_STRUCT__entry(
+ __dynamic_array(u8, ring, TRB_RING_SIZE)
+ __dynamic_array(u8, priv_ep, sizeof(struct cdns3_endpoint))
+ __dynamic_array(char, buffer,
+ (TRBS_PER_SEGMENT * 65) + CDNS3_MSG_MAX)
+ ),
+ TP_fast_assign(
+ memcpy(__get_dynamic_array(priv_ep), priv_ep,
+ sizeof(struct cdns3_endpoint));
+ memcpy(__get_dynamic_array(ring), priv_ep->trb_pool,
+ TRB_RING_SIZE);
+ ),
+
+ TP_printk("%s",
+ cdns3_dbg_ring((struct cdns3_endpoint *)__get_str(priv_ep),
+ (struct cdns3_trb *)__get_str(ring),
+ __get_str(buffer)))
+);
+
+DEFINE_EVENT(cdns3_log_ring, cdns3_ring,
+ TP_PROTO(struct cdns3_endpoint *priv_ep),
+ TP_ARGS(priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_ep,
+ TP_PROTO(struct cdns3_endpoint *priv_ep),
+ TP_ARGS(priv_ep),
+ TP_STRUCT__entry(
+ __string(name, priv_ep->name)
+ __field(unsigned int, maxpacket)
+ __field(unsigned int, maxpacket_limit)
+ __field(unsigned int, max_streams)
+ __field(unsigned int, maxburst)
+ __field(unsigned int, flags)
+ __field(unsigned int, dir)
+ __field(u8, enqueue)
+ __field(u8, dequeue)
+ ),
+ TP_fast_assign(
+ __assign_str(name, priv_ep->name);
+ __entry->maxpacket = priv_ep->endpoint.maxpacket;
+ __entry->maxpacket_limit = priv_ep->endpoint.maxpacket_limit;
+ __entry->max_streams = priv_ep->endpoint.max_streams;
+ __entry->maxburst = priv_ep->endpoint.maxburst;
+ __entry->flags = priv_ep->flags;
+ __entry->dir = priv_ep->dir;
+ __entry->enqueue = priv_ep->enqueue;
+ __entry->dequeue = priv_ep->dequeue;
+ ),
+ TP_printk("%s: mps: %d/%d. streams: %d, burst: %d, enq idx: %d, "
+ "deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s",
+ __get_str(name), __entry->maxpacket,
+ __entry->maxpacket_limit, __entry->max_streams,
+ __entry->maxburst, __entry->enqueue,
+ __entry->dequeue,
+ __entry->flags & EP_ENABLED ? "EN | " : "",
+ __entry->flags & EP_STALLED ? "STALLED | " : "",
+ __entry->flags & EP_WEDGE ? "WEDGE | " : "",
+ __entry->flags & EP_TRANSFER_STARTED ? "STARTED | " : "",
+ __entry->flags & EP_UPDATE_EP_TRBADDR ? "UPD TRB | " : "",
+ __entry->flags & EP_PENDING_REQUEST ? "REQ PEN | " : "",
+ __entry->flags & EP_RING_FULL ? "RING FULL |" : "",
+ __entry->flags & EP_CLAIMED ? "CLAIMED " : "",
+ __entry->dir ? "IN" : "OUT"
+ )
+);
+
+DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_enable,
+ TP_PROTO(struct cdns3_endpoint *priv_ep),
+ TP_ARGS(priv_ep)
+);
+
+DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_disable,
+ TP_PROTO(struct cdns3_endpoint *priv_ep),
+ TP_ARGS(priv_ep)
+);
+
+DECLARE_EVENT_CLASS(cdns3_log_request_handled,
+ TP_PROTO(struct cdns3_request *priv_req, int current_index,
+ int handled),
+ TP_ARGS(priv_req, current_index, handled),
+ TP_STRUCT__entry(
+ __field(struct cdns3_request *, priv_req)
+ __field(unsigned int, dma_position)
+ __field(unsigned int, handled)
+ __field(unsigned int, dequeue_idx)
+ __field(unsigned int, enqueue_idx)
+ __field(unsigned int, start_trb)
+ __field(unsigned int, end_trb)
+ ),
+ TP_fast_assign(
+ __entry->priv_req = priv_req;
+ __entry->dma_position = current_index;
+ __entry->handled = handled;
+ __entry->dequeue_idx = priv_req->priv_ep->dequeue;
+ __entry->enqueue_idx = priv_req->priv_ep->enqueue;
+ __entry->start_trb = priv_req->start_trb;
+ __entry->end_trb = priv_req->end_trb;
+ ),
+ TP_printk("Req: %p %s, DMA pos: %d, ep deq: %d, ep enq: %d,"
+ " start trb: %d, end trb: %d",
+ __entry->priv_req,
+ __entry->handled ? "handled" : "not handled",
+ __entry->dma_position, __entry->dequeue_idx,
+ __entry->enqueue_idx, __entry->start_trb,
+ __entry->end_trb
+ )
+);
+
+DEFINE_EVENT(cdns3_log_request_handled, cdns3_request_handled,
+ TP_PROTO(struct cdns3_request *priv_req, int current_index,
+ int handled),
+ TP_ARGS(priv_req, current_index, handled)
+);
+#endif /* __LINUX_CDNS3_TRACE */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index eb37ebfcb123..ae850b3fddf2 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -6,6 +6,7 @@ config USB_CHIPIDEA
select EXTCON
select RESET_CONTROLLER
select USB_ULPI_BUS
+ select USB_ROLE_SWITCH
help
Say Y here if your system has a dual role high speed USB
controller based on ChipIdea silicon IP. It supports:
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 6a2cc5cd0281..6911aef500e9 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -16,6 +16,7 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg-fsm.h>
#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
#include <linux/ulpi/interface.h>
/******************************************************************************
@@ -217,6 +218,7 @@ struct ci_hdrc {
ktime_t hr_timeouts[NUM_OTG_FSM_TIMERS];
unsigned enabled_otg_timer_bits;
enum otg_fsm_timer next_otg_timer;
+ struct usb_role_switch *role_switch;
struct work_struct work;
struct workqueue_struct *wq;
@@ -290,6 +292,16 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
ci->roles[role]->stop(ci);
}
+static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci)
+{
+ if (ci->role == CI_ROLE_HOST)
+ return USB_ROLE_HOST;
+ else if (ci->role == CI_ROLE_GADGET && ci->vbus_active)
+ return USB_ROLE_DEVICE;
+ else
+ return USB_ROLE_NONE;
+}
+
/**
* hw_read_id_reg: reads from a identification register
* @ci: the controller
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index bb4645a8ca46..af648ba6544d 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -216,13 +216,13 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
ci->rcdev.ops = &ci_hdrc_msm_reset_ops;
ci->rcdev.of_node = pdev->dev.of_node;
ci->rcdev.nr_resets = 2;
- ret = reset_controller_register(&ci->rcdev);
+ ret = devm_reset_controller_register(&pdev->dev, &ci->rcdev);
if (ret)
return ret;
ret = clk_prepare_enable(ci->fs_clk);
if (ret)
- goto err_fs;
+ return ret;
reset_control_assert(reset);
usleep_range(10000, 12000);
@@ -232,7 +232,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
ret = clk_prepare_enable(ci->core_clk);
if (ret)
- goto err_fs;
+ return ret;
ret = clk_prepare_enable(ci->iface_clk);
if (ret)
@@ -271,8 +271,6 @@ err_mux:
clk_disable_unprepare(ci->iface_clk);
err_iface:
clk_disable_unprepare(ci->core_clk);
-err_fs:
- reset_controller_unregister(&ci->rcdev);
return ret;
}
@@ -284,7 +282,6 @@ static int ci_hdrc_msm_remove(struct platform_device *pdev)
ci_hdrc_remove_device(ci->ci);
clk_disable_unprepare(ci->iface_clk);
clk_disable_unprepare(ci->core_clk);
- reset_controller_unregister(&ci->rcdev);
return 0;
}
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 26062d610c20..98ee575ee500 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -600,6 +600,71 @@ static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
return NOTIFY_DONE;
}
+static enum usb_role ci_usb_role_switch_get(struct device *dev)
+{
+ struct ci_hdrc *ci = dev_get_drvdata(dev);
+ enum usb_role role;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ci->lock, flags);
+ role = ci_role_to_usb_role(ci);
+ spin_unlock_irqrestore(&ci->lock, flags);
+
+ return role;
+}
+
+static int ci_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+ struct ci_hdrc *ci = dev_get_drvdata(dev);
+ struct ci_hdrc_cable *cable = NULL;
+ enum usb_role current_role = ci_role_to_usb_role(ci);
+ unsigned long flags;
+
+ if (current_role == role)
+ return 0;
+
+ pm_runtime_get_sync(ci->dev);
+ /* Stop current role */
+ spin_lock_irqsave(&ci->lock, flags);
+ if (current_role == USB_ROLE_DEVICE)
+ cable = &ci->platdata->vbus_extcon;
+ else if (current_role == USB_ROLE_HOST)
+ cable = &ci->platdata->id_extcon;
+
+ if (cable) {
+ cable->changed = true;
+ cable->connected = false;
+ ci_irq(ci->irq, ci);
+ spin_unlock_irqrestore(&ci->lock, flags);
+ if (ci->wq && role != USB_ROLE_NONE)
+ flush_workqueue(ci->wq);
+ spin_lock_irqsave(&ci->lock, flags);
+ }
+
+ cable = NULL;
+
+ /* Start target role */
+ if (role == USB_ROLE_DEVICE)
+ cable = &ci->platdata->vbus_extcon;
+ else if (role == USB_ROLE_HOST)
+ cable = &ci->platdata->id_extcon;
+
+ if (cable) {
+ cable->changed = true;
+ cable->connected = true;
+ ci_irq(ci->irq, ci);
+ }
+ spin_unlock_irqrestore(&ci->lock, flags);
+ pm_runtime_put_sync(ci->dev);
+
+ return 0;
+}
+
+static struct usb_role_switch_desc ci_role_switch = {
+ .set = ci_usb_role_switch_set,
+ .get = ci_usb_role_switch_get,
+};
+
static int ci_get_platdata(struct device *dev,
struct ci_hdrc_platform_data *platdata)
{
@@ -726,6 +791,9 @@ static int ci_get_platdata(struct device *dev,
cable->connected = false;
}
+ if (device_property_read_bool(dev, "usb-role-switch"))
+ ci_role_switch.fwnode = dev->fwnode;
+
platdata->pctl = devm_pinctrl_get(dev);
if (!IS_ERR(platdata->pctl)) {
struct pinctrl_state *p;
@@ -903,10 +971,7 @@ static struct attribute *ci_attrs[] = {
&dev_attr_role.attr,
NULL,
};
-
-static const struct attribute_group ci_attr_group = {
- .attrs = ci_attrs,
-};
+ATTRIBUTE_GROUPS(ci);
static int ci_hdrc_probe(struct platform_device *pdev)
{
@@ -1008,7 +1073,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
ci->irq = platform_get_irq(pdev, 0);
if (ci->irq < 0) {
- dev_err(dev, "missing IRQ\n");
ret = ci->irq;
goto deinit_phy;
}
@@ -1051,6 +1115,15 @@ static int ci_hdrc_probe(struct platform_device *pdev)
}
}
+ if (ci_role_switch.fwnode) {
+ ci->role_switch = usb_role_switch_register(dev,
+ &ci_role_switch);
+ if (IS_ERR(ci->role_switch)) {
+ ret = PTR_ERR(ci->role_switch);
+ goto deinit_otg;
+ }
+ }
+
if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
if (ci->is_otg) {
ci->role = ci_otg_role(ci);
@@ -1106,15 +1179,12 @@ static int ci_hdrc_probe(struct platform_device *pdev)
device_set_wakeup_capable(&pdev->dev, true);
dbg_create_files(ci);
- ret = sysfs_create_group(&dev->kobj, &ci_attr_group);
- if (ret)
- goto remove_debug;
-
return 0;
-remove_debug:
- dbg_remove_files(ci);
stop:
+ if (ci->role_switch)
+ usb_role_switch_unregister(ci->role_switch);
+deinit_otg:
if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
ci_hdrc_otg_destroy(ci);
deinit_gadget:
@@ -1133,6 +1203,9 @@ static int ci_hdrc_remove(struct platform_device *pdev)
{
struct ci_hdrc *ci = platform_get_drvdata(pdev);
+ if (ci->role_switch)
+ usb_role_switch_unregister(ci->role_switch);
+
if (ci->supports_runtime_pm) {
pm_runtime_get_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -1140,7 +1213,6 @@ static int ci_hdrc_remove(struct platform_device *pdev)
}
dbg_remove_files(ci);
- sysfs_remove_group(&ci->dev->kobj, &ci_attr_group);
ci_role_destroy(ci);
ci_hdrc_enter_lpm(ci, true);
ci_usb_phy_exit(ci);
@@ -1319,6 +1391,7 @@ static struct platform_driver ci_hdrc_driver = {
.driver = {
.name = "ci_hdrc",
.pm = &ci_pm_ops,
+ .dev_groups = ci_groups,
},
};
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index f25d4827fd49..fbfb02e05c97 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -35,7 +35,7 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
* detection overwrite OTGSC register value
*/
cable = &ci->platdata->vbus_extcon;
- if (!IS_ERR(cable->edev)) {
+ if (!IS_ERR(cable->edev) || ci->role_switch) {
if (cable->changed)
val |= OTGSC_BSVIS;
else
@@ -53,7 +53,7 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
}
cable = &ci->platdata->id_extcon;
- if (!IS_ERR(cable->edev)) {
+ if (!IS_ERR(cable->edev) || ci->role_switch) {
if (cable->changed)
val |= OTGSC_IDIS;
else
@@ -83,7 +83,7 @@ void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
struct ci_hdrc_cable *cable;
cable = &ci->platdata->vbus_extcon;
- if (!IS_ERR(cable->edev)) {
+ if (!IS_ERR(cable->edev) || ci->role_switch) {
if (data & mask & OTGSC_BSVIS)
cable->changed = false;
@@ -97,7 +97,7 @@ void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
}
cable = &ci->platdata->id_extcon;
- if (!IS_ERR(cable->edev)) {
+ if (!IS_ERR(cable->edev) || ci->role_switch) {
if (data & mask & OTGSC_IDIS)
cable->changed = false;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 67ad40b0a05b..8f18e7b6cadf 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1762,12 +1762,11 @@ static int ci_udc_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
- int retval = -ENOMEM;
+ int retval;
if (driver->disconnect == NULL)
return -EINVAL;
-
ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
retval = usb_ep_enable(&ci->ep0out->ep);
if (retval)
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 407a7a6198a2..7fea4999d352 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -1082,6 +1082,12 @@ static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *att
static DEVICE_ATTR_RO(ieee1284_id);
+static struct attribute *usblp_attrs[] = {
+ &dev_attr_ieee1284_id.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(usblp);
+
static int usblp_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -1156,9 +1162,6 @@ static int usblp_probe(struct usb_interface *intf,
/* Retrieve and store the device ID string. */
usblp_cache_device_id_string(usblp);
- retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id);
- if (retval)
- goto abort_intfdata;
#ifdef DEBUG
usblp_check_status(usblp, 0);
@@ -1189,7 +1192,6 @@ static int usblp_probe(struct usb_interface *intf,
abort_intfdata:
usb_set_intfdata(intf, NULL);
- device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
abort:
kfree(usblp->readbuf);
kfree(usblp->statusbuf);
@@ -1360,8 +1362,6 @@ static void usblp_disconnect(struct usb_interface *intf)
BUG();
}
- device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
-
mutex_lock(&usblp_mutex);
mutex_lock(&usblp->mut);
usblp->present = 0;
@@ -1421,6 +1421,7 @@ static struct usb_driver usblp_driver = {
.suspend = usblp_suspend,
.resume = usblp_resume,
.id_table = usblp_ids,
+ .dev_groups = usblp_groups,
.supports_autosuspend = 1,
};
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 36858ddd8d9b..dcd7066ffba2 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1836,17 +1836,14 @@ capability_attribute(device_capabilities);
capability_attribute(usb488_interface_capabilities);
capability_attribute(usb488_device_capabilities);
-static struct attribute *capability_attrs[] = {
+static struct attribute *usbtmc_attrs[] = {
&dev_attr_interface_capabilities.attr,
&dev_attr_device_capabilities.attr,
&dev_attr_usb488_interface_capabilities.attr,
&dev_attr_usb488_device_capabilities.attr,
NULL,
};
-
-static const struct attribute_group capability_attr_grp = {
- .attrs = capability_attrs,
-};
+ATTRIBUTE_GROUPS(usbtmc);
static int usbtmc_ioctl_indicator_pulse(struct usbtmc_device_data *data)
{
@@ -2386,9 +2383,6 @@ static int usbtmc_probe(struct usb_interface *intf,
retcode = get_capabilities(data);
if (retcode)
dev_err(&intf->dev, "can't read capabilities\n");
- else
- retcode = sysfs_create_group(&intf->dev.kobj,
- &capability_attr_grp);
if (data->iin_ep_present) {
/* allocate int urb */
@@ -2435,7 +2429,6 @@ static int usbtmc_probe(struct usb_interface *intf,
return 0;
error_register:
- sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp);
usbtmc_free_int(data);
err_put:
kref_put(&data->kref, usbtmc_delete);
@@ -2448,7 +2441,6 @@ static void usbtmc_disconnect(struct usb_interface *intf)
struct list_head *elem;
usb_deregister_dev(intf, &usbtmc_class);
- sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp);
mutex_lock(&data->io_mutex);
data->zombie = 1;
wake_up_interruptible_all(&data->waitq);
@@ -2554,6 +2546,7 @@ static struct usb_driver usbtmc_driver = {
.resume = usbtmc_resume,
.pre_reset = usbtmc_pre_reset,
.post_reset = usbtmc_post_reset,
+ .dev_groups = usbtmc_groups,
};
module_usb_driver(usbtmc_driver);
diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig
new file mode 100644
index 000000000000..d611477aae41
--- /dev/null
+++ b/drivers/usb/common/Kconfig
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_COMMON
+ tristate
+
+
+config USB_LED_TRIG
+ bool "USB LED Triggers"
+ depends on LEDS_CLASS && LEDS_TRIGGERS
+ select USB_COMMON
+ help
+ This option adds LED triggers for USB host and/or gadget activity.
+
+ Say Y here if you are working on a system with led-class supported
+ LEDs and you want to use them as activity indicators for USB host or
+ gadget.
+
+config USB_ULPI_BUS
+ tristate "USB ULPI PHY interface support"
+ select USB_COMMON
+ help
+ UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+ USB 2.0 PHY interface. The ULPI specification defines a standard set
+ of registers that can be used to detect the vendor and product which
+ allows ULPI to be handled as a bus. This module is the driver for that
+ bus.
+
+ The ULPI interfaces (the buses) are registered by the drivers for USB
+ controllers which support ULPI register access and have ULPI PHY
+ attached to them. The ULPI PHY drivers themselves are normal PHY
+ drivers.
+
+ ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+ protocol) and USB charger detection.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ulpi.
+
+config USB_CONN_GPIO
+ tristate "USB GPIO Based Connection Detection Driver"
+ depends on GPIOLIB
+ select USB_ROLE_SWITCH
+ help
+ The driver supports USB role switch between host and device via GPIO
+ based USB cable detection, used typically if an input GPIO is used
+ to detect USB ID pin, and another input GPIO may be also used to detect
+ Vbus pin at the same time, it also can be used to enable/disable
+ device if an input GPIO is only used to detect Vbus pin.
+
+ To compile the driver as a module, choose M here: the module will
+ be called usb-conn-gpio.ko
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
index 0a7c45e85481..8ac4d21ef5c8 100644
--- a/drivers/usb/common/Makefile
+++ b/drivers/usb/common/Makefile
@@ -5,7 +5,9 @@
obj-$(CONFIG_USB_COMMON) += usb-common.o
usb-common-y += common.o
+usb-common-$(CONFIG_TRACING) += debug.o
usb-common-$(CONFIG_USB_LED_TRIG) += led.o
+obj-$(CONFIG_USB_CONN_GPIO) += usb-conn-gpio.o
obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o
diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c
new file mode 100644
index 000000000000..92a986aeaa5d
--- /dev/null
+++ b/drivers/usb/common/debug.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * Common USB debugging functions
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#include <linux/usb/ch9.h>
+
+static void usb_decode_get_status(__u8 bRequestType, __u16 wIndex,
+ __u16 wLength, char *str, size_t size)
+{
+ switch (bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_DEVICE:
+ snprintf(str, size, "Get Device Status(Length = %d)", wLength);
+ break;
+ case USB_RECIP_INTERFACE:
+ snprintf(str, size,
+ "Get Interface Status(Intf = %d, Length = %d)",
+ wIndex, wLength);
+ break;
+ case USB_RECIP_ENDPOINT:
+ snprintf(str, size, "Get Endpoint Status(ep%d%s)",
+ wIndex & ~USB_DIR_IN,
+ wIndex & USB_DIR_IN ? "in" : "out");
+ break;
+ }
+}
+
+static const char *usb_decode_device_feature(u16 wValue)
+{
+ switch (wValue) {
+ case USB_DEVICE_SELF_POWERED:
+ return "Self Powered";
+ case USB_DEVICE_REMOTE_WAKEUP:
+ return "Remote Wakeup";
+ case USB_DEVICE_TEST_MODE:
+ return "Test Mode";
+ case USB_DEVICE_U1_ENABLE:
+ return "U1 Enable";
+ case USB_DEVICE_U2_ENABLE:
+ return "U2 Enable";
+ case USB_DEVICE_LTM_ENABLE:
+ return "LTM Enable";
+ default:
+ return "UNKNOWN";
+ }
+}
+
+static const char *usb_decode_test_mode(u16 wIndex)
+{
+ switch (wIndex) {
+ case TEST_J:
+ return ": TEST_J";
+ case TEST_K:
+ return ": TEST_K";
+ case TEST_SE0_NAK:
+ return ": TEST_SE0_NAK";
+ case TEST_PACKET:
+ return ": TEST_PACKET";
+ case TEST_FORCE_EN:
+ return ": TEST_FORCE_EN";
+ default:
+ return ": UNKNOWN";
+ }
+}
+
+static void usb_decode_set_clear_feature(__u8 bRequestType,
+ __u8 bRequest, __u16 wValue,
+ __u16 wIndex, char *str, size_t size)
+{
+ switch (bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_DEVICE:
+ snprintf(str, size, "%s Device Feature(%s%s)",
+ bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+ usb_decode_device_feature(wValue),
+ wValue == USB_DEVICE_TEST_MODE ?
+ usb_decode_test_mode(wIndex) : "");
+ break;
+ case USB_RECIP_INTERFACE:
+ snprintf(str, size, "%s Interface Feature(%s)",
+ bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+ wValue == USB_INTRF_FUNC_SUSPEND ?
+ "Function Suspend" : "UNKNOWN");
+ break;
+ case USB_RECIP_ENDPOINT:
+ snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)",
+ bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
+ wValue == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN",
+ wIndex & ~USB_DIR_IN,
+ wIndex & USB_DIR_IN ? "in" : "out");
+ break;
+ }
+}
+
+static void usb_decode_set_address(__u16 wValue, char *str, size_t size)
+{
+ snprintf(str, size, "Set Address(Addr = %02x)", wValue);
+}
+
+static void usb_decode_get_set_descriptor(__u8 bRequestType, __u8 bRequest,
+ __u16 wValue, __u16 wIndex,
+ __u16 wLength, char *str, size_t size)
+{
+ char *s;
+
+ switch (wValue >> 8) {
+ case USB_DT_DEVICE:
+ s = "Device";
+ break;
+ case USB_DT_CONFIG:
+ s = "Configuration";
+ break;
+ case USB_DT_STRING:
+ s = "String";
+ break;
+ case USB_DT_INTERFACE:
+ s = "Interface";
+ break;
+ case USB_DT_ENDPOINT:
+ s = "Endpoint";
+ break;
+ case USB_DT_DEVICE_QUALIFIER:
+ s = "Device Qualifier";
+ break;
+ case USB_DT_OTHER_SPEED_CONFIG:
+ s = "Other Speed Config";
+ break;
+ case USB_DT_INTERFACE_POWER:
+ s = "Interface Power";
+ break;
+ case USB_DT_OTG:
+ s = "OTG";
+ break;
+ case USB_DT_DEBUG:
+ s = "Debug";
+ break;
+ case USB_DT_INTERFACE_ASSOCIATION:
+ s = "Interface Association";
+ break;
+ case USB_DT_BOS:
+ s = "BOS";
+ break;
+ case USB_DT_DEVICE_CAPABILITY:
+ s = "Device Capability";
+ break;
+ case USB_DT_PIPE_USAGE:
+ s = "Pipe Usage";
+ break;
+ case USB_DT_SS_ENDPOINT_COMP:
+ s = "SS Endpoint Companion";
+ break;
+ case USB_DT_SSP_ISOC_ENDPOINT_COMP:
+ s = "SSP Isochronous Endpoint Companion";
+ break;
+ default:
+ s = "UNKNOWN";
+ break;
+ }
+
+ snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)",
+ bRequest == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set",
+ s, wValue & 0xff, wLength);
+}
+
+static void usb_decode_get_configuration(__u16 wLength, char *str, size_t size)
+{
+ snprintf(str, size, "Get Configuration(Length = %d)", wLength);
+}
+
+static void usb_decode_set_configuration(__u8 wValue, char *str, size_t size)
+{
+ snprintf(str, size, "Set Configuration(Config = %d)", wValue);
+}
+
+static void usb_decode_get_intf(__u16 wIndex, __u16 wLength, char *str,
+ size_t size)
+{
+ snprintf(str, size, "Get Interface(Intf = %d, Length = %d)",
+ wIndex, wLength);
+}
+
+static void usb_decode_set_intf(__u8 wValue, __u16 wIndex, char *str,
+ size_t size)
+{
+ snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)",
+ wIndex, wValue);
+}
+
+static void usb_decode_synch_frame(__u16 wIndex, __u16 wLength,
+ char *str, size_t size)
+{
+ snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)",
+ wIndex, wLength);
+}
+
+static void usb_decode_set_sel(__u16 wLength, char *str, size_t size)
+{
+ snprintf(str, size, "Set SEL(Length = %d)", wLength);
+}
+
+static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size)
+{
+ snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue);
+}
+
+/**
+ * usb_decode_ctrl - returns a string representation of ctrl request
+ */
+const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
+{
+ switch (bRequest) {
+ case USB_REQ_GET_STATUS:
+ usb_decode_get_status(bRequestType, wIndex, wLength, str, size);
+ break;
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ usb_decode_set_clear_feature(bRequestType, bRequest, wValue,
+ wIndex, str, size);
+ break;
+ case USB_REQ_SET_ADDRESS:
+ usb_decode_set_address(wValue, str, size);
+ break;
+ case USB_REQ_GET_DESCRIPTOR:
+ case USB_REQ_SET_DESCRIPTOR:
+ usb_decode_get_set_descriptor(bRequestType, bRequest, wValue,
+ wIndex, wLength, str, size);
+ break;
+ case USB_REQ_GET_CONFIGURATION:
+ usb_decode_get_configuration(wLength, str, size);
+ break;
+ case USB_REQ_SET_CONFIGURATION:
+ usb_decode_set_configuration(wValue, str, size);
+ break;
+ case USB_REQ_GET_INTERFACE:
+ usb_decode_get_intf(wIndex, wLength, str, size);
+ break;
+ case USB_REQ_SET_INTERFACE:
+ usb_decode_set_intf(wValue, wIndex, str, size);
+ break;
+ case USB_REQ_SYNCH_FRAME:
+ usb_decode_synch_frame(wIndex, wLength, str, size);
+ break;
+ case USB_REQ_SET_SEL:
+ usb_decode_set_sel(wLength, str, size);
+ break;
+ case USB_REQ_SET_ISOCH_DELAY:
+ usb_decode_set_isoch_delay(wValue, str, size);
+ break;
+ default:
+ snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x",
+ bRequestType, bRequest,
+ (u8)(cpu_to_le16(wValue) & 0xff),
+ (u8)(cpu_to_le16(wValue) >> 8),
+ (u8)(cpu_to_le16(wIndex) & 0xff),
+ (u8)(cpu_to_le16(wIndex) >> 8),
+ (u8)(cpu_to_le16(wLength) & 0xff),
+ (u8)(cpu_to_le16(wLength) >> 8));
+ }
+
+ return str;
+}
+EXPORT_SYMBOL_GPL(usb_decode_ctrl);
diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
new file mode 100644
index 000000000000..87338f9eb5be
--- /dev/null
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USB GPIO Based Connection Detection Driver
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ *
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ *
+ * Some code borrowed from drivers/extcon/extcon-usb-gpio.c
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/role.h>
+
+#define USB_GPIO_DEB_MS 20 /* ms */
+#define USB_GPIO_DEB_US ((USB_GPIO_DEB_MS) * 1000) /* us */
+
+#define USB_CONN_IRQF \
+ (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
+
+struct usb_conn_info {
+ struct device *dev;
+ struct usb_role_switch *role_sw;
+ enum usb_role last_role;
+ struct regulator *vbus;
+ struct delayed_work dw_det;
+ unsigned long debounce_jiffies;
+
+ struct gpio_desc *id_gpiod;
+ struct gpio_desc *vbus_gpiod;
+ int id_irq;
+ int vbus_irq;
+};
+
+/**
+ * "DEVICE" = VBUS and "HOST" = !ID, so we have:
+ * Both "DEVICE" and "HOST" can't be set as active at the same time
+ * so if "HOST" is active (i.e. ID is 0) we keep "DEVICE" inactive
+ * even if VBUS is on.
+ *
+ * Role | ID | VBUS
+ * ------------------------------------
+ * [1] DEVICE | H | H
+ * [2] NONE | H | L
+ * [3] HOST | L | H
+ * [4] HOST | L | L
+ *
+ * In case we have only one of these signals:
+ * - VBUS only - we want to distinguish between [1] and [2], so ID is always 1
+ * - ID only - we want to distinguish between [1] and [4], so VBUS = ID
+ */
+static void usb_conn_detect_cable(struct work_struct *work)
+{
+ struct usb_conn_info *info;
+ enum usb_role role;
+ int id, vbus, ret;
+
+ info = container_of(to_delayed_work(work),
+ struct usb_conn_info, dw_det);
+
+ /* check ID and VBUS */
+ id = info->id_gpiod ?
+ gpiod_get_value_cansleep(info->id_gpiod) : 1;
+ vbus = info->vbus_gpiod ?
+ gpiod_get_value_cansleep(info->vbus_gpiod) : id;
+
+ if (!id)
+ role = USB_ROLE_HOST;
+ else if (vbus)
+ role = USB_ROLE_DEVICE;
+ else
+ role = USB_ROLE_NONE;
+
+ dev_dbg(info->dev, "role %d/%d, gpios: id %d, vbus %d\n",
+ info->last_role, role, id, vbus);
+
+ if (info->last_role == role) {
+ dev_warn(info->dev, "repeated role: %d\n", role);
+ return;
+ }
+
+ if (info->last_role == USB_ROLE_HOST)
+ regulator_disable(info->vbus);
+
+ ret = usb_role_switch_set_role(info->role_sw, role);
+ if (ret)
+ dev_err(info->dev, "failed to set role: %d\n", ret);
+
+ if (role == USB_ROLE_HOST) {
+ ret = regulator_enable(info->vbus);
+ if (ret)
+ dev_err(info->dev, "enable vbus regulator failed\n");
+ }
+
+ info->last_role = role;
+
+ dev_dbg(info->dev, "vbus regulator is %s\n",
+ regulator_is_enabled(info->vbus) ? "enabled" : "disabled");
+}
+
+static void usb_conn_queue_dwork(struct usb_conn_info *info,
+ unsigned long delay)
+{
+ queue_delayed_work(system_power_efficient_wq, &info->dw_det, delay);
+}
+
+static irqreturn_t usb_conn_isr(int irq, void *dev_id)
+{
+ struct usb_conn_info *info = dev_id;
+
+ usb_conn_queue_dwork(info, info->debounce_jiffies);
+
+ return IRQ_HANDLED;
+}
+
+static int usb_conn_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usb_conn_info *info;
+ int ret = 0;
+
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = dev;
+ info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN);
+ if (IS_ERR(info->id_gpiod))
+ return PTR_ERR(info->id_gpiod);
+
+ info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN);
+ if (IS_ERR(info->vbus_gpiod))
+ return PTR_ERR(info->vbus_gpiod);
+
+ if (!info->id_gpiod && !info->vbus_gpiod) {
+ dev_err(dev, "failed to get gpios\n");
+ return -ENODEV;
+ }
+
+ if (info->id_gpiod)
+ ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US);
+ if (!ret && info->vbus_gpiod)
+ ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US);
+ if (ret < 0)
+ info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS);
+
+ INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable);
+
+ info->vbus = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(info->vbus)) {
+ dev_err(dev, "failed to get vbus\n");
+ return PTR_ERR(info->vbus);
+ }
+
+ info->role_sw = usb_role_switch_get(dev);
+ if (IS_ERR(info->role_sw)) {
+ if (PTR_ERR(info->role_sw) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get role switch\n");
+
+ return PTR_ERR(info->role_sw);
+ }
+
+ if (info->id_gpiod) {
+ info->id_irq = gpiod_to_irq(info->id_gpiod);
+ if (info->id_irq < 0) {
+ dev_err(dev, "failed to get ID IRQ\n");
+ ret = info->id_irq;
+ goto put_role_sw;
+ }
+
+ ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+ usb_conn_isr, USB_CONN_IRQF,
+ pdev->name, info);
+ if (ret < 0) {
+ dev_err(dev, "failed to request ID IRQ\n");
+ goto put_role_sw;
+ }
+ }
+
+ if (info->vbus_gpiod) {
+ info->vbus_irq = gpiod_to_irq(info->vbus_gpiod);
+ if (info->vbus_irq < 0) {
+ dev_err(dev, "failed to get VBUS IRQ\n");
+ ret = info->vbus_irq;
+ goto put_role_sw;
+ }
+
+ ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
+ usb_conn_isr, USB_CONN_IRQF,
+ pdev->name, info);
+ if (ret < 0) {
+ dev_err(dev, "failed to request VBUS IRQ\n");
+ goto put_role_sw;
+ }
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ /* Perform initial detection */
+ usb_conn_queue_dwork(info, 0);
+
+ return 0;
+
+put_role_sw:
+ usb_role_switch_put(info->role_sw);
+ return ret;
+}
+
+static int usb_conn_remove(struct platform_device *pdev)
+{
+ struct usb_conn_info *info = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&info->dw_det);
+
+ if (info->last_role == USB_ROLE_HOST)
+ regulator_disable(info->vbus);
+
+ usb_role_switch_put(info->role_sw);
+
+ return 0;
+}
+
+static int __maybe_unused usb_conn_suspend(struct device *dev)
+{
+ struct usb_conn_info *info = dev_get_drvdata(dev);
+
+ if (info->id_gpiod)
+ disable_irq(info->id_irq);
+ if (info->vbus_gpiod)
+ disable_irq(info->vbus_irq);
+
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int __maybe_unused usb_conn_resume(struct device *dev)
+{
+ struct usb_conn_info *info = dev_get_drvdata(dev);
+
+ pinctrl_pm_select_default_state(dev);
+
+ if (info->id_gpiod)
+ enable_irq(info->id_irq);
+ if (info->vbus_gpiod)
+ enable_irq(info->vbus_irq);
+
+ usb_conn_queue_dwork(info, 0);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(usb_conn_pm_ops,
+ usb_conn_suspend, usb_conn_resume);
+
+static const struct of_device_id usb_conn_dt_match[] = {
+ { .compatible = "gpio-usb-b-connector", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, usb_conn_dt_match);
+
+static struct platform_driver usb_conn_driver = {
+ .probe = usb_conn_probe,
+ .remove = usb_conn_remove,
+ .driver = {
+ .name = "usb-conn-gpio",
+ .pm = &usb_conn_pm_ops,
+ .of_match_table = usb_conn_dt_match,
+ },
+};
+
+module_platform_driver(usb_conn_driver);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_DESCRIPTION("USB GPIO based connection detection driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 9d6cb709ca7b..151a74a54386 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -921,7 +921,7 @@ int usb_get_bos_descriptor(struct usb_device *dev)
struct usb_bos_descriptor *bos;
struct usb_dev_cap_header *cap;
struct usb_ssp_cap_descriptor *ssp_cap;
- unsigned char *buffer;
+ unsigned char *buffer, *buffer0;
int length, total_len, num, i, ssac;
__u8 cap_type;
int ret;
@@ -966,10 +966,12 @@ int usb_get_bos_descriptor(struct usb_device *dev)
ret = -ENOMSG;
goto err;
}
+
+ buffer0 = buffer;
total_len -= length;
+ buffer += length;
for (i = 0; i < num; i++) {
- buffer += length;
cap = (struct usb_dev_cap_header *)buffer;
if (total_len < sizeof(*cap) || total_len < cap->bLength) {
@@ -983,8 +985,6 @@ int usb_get_bos_descriptor(struct usb_device *dev)
break;
}
- total_len -= length;
-
if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
dev_warn(ddev, "descriptor type invalid, skip\n");
continue;
@@ -1019,7 +1019,11 @@ int usb_get_bos_descriptor(struct usb_device *dev)
default:
break;
}
+
+ total_len -= length;
+ buffer += length;
}
+ dev->bos->desc->wTotalLength = cpu_to_le16(buffer - buffer0);
return 0;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index e3696601e43b..3f899552f6e3 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -44,10 +44,19 @@
#include "usb.h"
+#ifdef CONFIG_PM
+#define MAYBE_CAP_SUSPEND USBDEVFS_CAP_SUSPEND
+#else
+#define MAYBE_CAP_SUSPEND 0
+#endif
+
#define USB_MAXBUS 64
#define USB_DEVICE_MAX (USB_MAXBUS * 128)
#define USB_SG_SIZE 16384 /* split-size for large txs */
+/* Mutual exclusion for ps->list in resume vs. release and remove */
+static DEFINE_MUTEX(usbfs_mutex);
+
struct usb_dev_state {
struct list_head list; /* state list */
struct usb_device *dev;
@@ -57,14 +66,17 @@ struct usb_dev_state {
struct list_head async_completed;
struct list_head memory_list;
wait_queue_head_t wait; /* wake up if a request completed */
+ wait_queue_head_t wait_for_resume; /* wake up upon runtime resume */
unsigned int discsignr;
struct pid *disc_pid;
const struct cred *cred;
sigval_t disccontext;
unsigned long ifclaimed;
u32 disabled_bulk_eps;
- bool privileges_dropped;
unsigned long interface_allowed_mask;
+ int not_yet_resumed;
+ bool suspend_allowed;
+ bool privileges_dropped;
};
struct usb_memory {
@@ -694,9 +706,7 @@ static void driver_disconnect(struct usb_interface *intf)
destroy_async_on_interface(ps, ifnum);
}
-/* The following routines are merely placeholders. There is no way
- * to inform a user task about suspend or resumes.
- */
+/* We don't care about suspend/resume of claimed interfaces */
static int driver_suspend(struct usb_interface *intf, pm_message_t msg)
{
return 0;
@@ -707,12 +717,32 @@ static int driver_resume(struct usb_interface *intf)
return 0;
}
+/* The following routines apply to the entire device, not interfaces */
+void usbfs_notify_suspend(struct usb_device *udev)
+{
+ /* We don't need to handle this */
+}
+
+void usbfs_notify_resume(struct usb_device *udev)
+{
+ struct usb_dev_state *ps;
+
+ /* Protect against simultaneous remove or release */
+ mutex_lock(&usbfs_mutex);
+ list_for_each_entry(ps, &udev->filelist, list) {
+ WRITE_ONCE(ps->not_yet_resumed, 0);
+ wake_up_all(&ps->wait_for_resume);
+ }
+ mutex_unlock(&usbfs_mutex);
+}
+
struct usb_driver usbfs_driver = {
.name = "usbfs",
.probe = driver_probe,
.disconnect = driver_disconnect,
.suspend = driver_suspend,
.resume = driver_resume,
+ .supports_autosuspend = 1,
};
static int claimintf(struct usb_dev_state *ps, unsigned int ifnum)
@@ -991,9 +1021,12 @@ static int usbdev_open(struct inode *inode, struct file *file)
INIT_LIST_HEAD(&ps->async_completed);
INIT_LIST_HEAD(&ps->memory_list);
init_waitqueue_head(&ps->wait);
+ init_waitqueue_head(&ps->wait_for_resume);
ps->disc_pid = get_pid(task_pid(current));
ps->cred = get_current_cred();
smp_wmb();
+
+ /* Can't race with resume; the device is already active */
list_add_tail(&ps->list, &dev->filelist);
file->private_data = ps;
usb_unlock_device(dev);
@@ -1019,7 +1052,10 @@ static int usbdev_release(struct inode *inode, struct file *file)
usb_lock_device(dev);
usb_hub_release_all_ports(dev, ps);
+ /* Protect against simultaneous resume */
+ mutex_lock(&usbfs_mutex);
list_del_init(&ps->list);
+ mutex_unlock(&usbfs_mutex);
for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed);
ifnum++) {
@@ -1027,7 +1063,8 @@ static int usbdev_release(struct inode *inode, struct file *file)
releaseintf(ps, ifnum);
}
destroy_all_async(ps);
- usb_autosuspend_device(dev);
+ if (!ps->suspend_allowed)
+ usb_autosuspend_device(dev);
usb_unlock_device(dev);
usb_put_dev(dev);
put_pid(ps->disc_pid);
@@ -1621,7 +1658,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
if (as->usbm)
num_sgs = 0;
- u += sizeof(struct async) + sizeof(struct urb) + uurb->buffer_length +
+ u += sizeof(struct async) + sizeof(struct urb) +
+ (as->usbm ? 0 : uurb->buffer_length) +
num_sgs * sizeof(struct scatterlist);
ret = usbfs_increase_memory_usage(u);
if (ret)
@@ -2273,7 +2311,8 @@ static int proc_get_capabilities(struct usb_dev_state *ps, void __user *arg)
caps = USBDEVFS_CAP_ZERO_PACKET | USBDEVFS_CAP_NO_PACKET_SIZE_LIM |
USBDEVFS_CAP_REAP_AFTER_DISCONNECT | USBDEVFS_CAP_MMAP |
- USBDEVFS_CAP_DROP_PRIVILEGES | USBDEVFS_CAP_CONNINFO_EX;
+ USBDEVFS_CAP_DROP_PRIVILEGES |
+ USBDEVFS_CAP_CONNINFO_EX | MAYBE_CAP_SUSPEND;
if (!ps->dev->bus->no_stop_on_short)
caps |= USBDEVFS_CAP_BULK_CONTINUATION;
if (ps->dev->bus->sg_tablesize)
@@ -2376,6 +2415,47 @@ static int proc_drop_privileges(struct usb_dev_state *ps, void __user *arg)
return 0;
}
+static int proc_forbid_suspend(struct usb_dev_state *ps)
+{
+ int ret = 0;
+
+ if (ps->suspend_allowed) {
+ ret = usb_autoresume_device(ps->dev);
+ if (ret == 0)
+ ps->suspend_allowed = false;
+ else if (ret != -ENODEV)
+ ret = -EIO;
+ }
+ return ret;
+}
+
+static int proc_allow_suspend(struct usb_dev_state *ps)
+{
+ if (!connected(ps))
+ return -ENODEV;
+
+ WRITE_ONCE(ps->not_yet_resumed, 1);
+ if (!ps->suspend_allowed) {
+ usb_autosuspend_device(ps->dev);
+ ps->suspend_allowed = true;
+ }
+ return 0;
+}
+
+static int proc_wait_for_resume(struct usb_dev_state *ps)
+{
+ int ret;
+
+ usb_unlock_device(ps->dev);
+ ret = wait_event_interruptible(ps->wait_for_resume,
+ READ_ONCE(ps->not_yet_resumed) == 0);
+ usb_lock_device(ps->dev);
+
+ if (ret != 0)
+ return -EINTR;
+ return proc_forbid_suspend(ps);
+}
+
/*
* NOTE: All requests here that have interface numbers as parameters
* are assuming that somehow the configuration has been prevented from
@@ -2570,6 +2650,15 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd,
case USBDEVFS_GET_SPEED:
ret = ps->dev->speed;
break;
+ case USBDEVFS_FORBID_SUSPEND:
+ ret = proc_forbid_suspend(ps);
+ break;
+ case USBDEVFS_ALLOW_SUSPEND:
+ ret = proc_allow_suspend(ps);
+ break;
+ case USBDEVFS_WAIT_FOR_RESUME:
+ ret = proc_wait_for_resume(ps);
+ break;
}
/* Handle variable-length commands */
@@ -2643,15 +2732,20 @@ static void usbdev_remove(struct usb_device *udev)
{
struct usb_dev_state *ps;
+ /* Protect against simultaneous resume */
+ mutex_lock(&usbfs_mutex);
while (!list_empty(&udev->filelist)) {
ps = list_entry(udev->filelist.next, struct usb_dev_state, list);
destroy_all_async(ps);
wake_up_all(&ps->wait);
+ WRITE_ONCE(ps->not_yet_resumed, 0);
+ wake_up_all(&ps->wait_for_resume);
list_del_init(&ps->list);
if (ps->discsignr)
kill_pid_usb_asyncio(ps->discsignr, EPIPE, ps->disccontext,
ps->disc_pid, ps->cred);
}
+ mutex_unlock(&usbfs_mutex);
}
static int usbdev_notify(struct notifier_block *self,
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ebcadaad89d1..2b27d232d7a7 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -892,6 +892,7 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver,
new_udriver->drvwrap.driver.probe = usb_probe_device;
new_udriver->drvwrap.driver.remove = usb_unbind_device;
new_udriver->drvwrap.driver.owner = owner;
+ new_udriver->drvwrap.driver.dev_groups = new_udriver->dev_groups;
retval = driver_register(&new_udriver->drvwrap.driver);
@@ -954,6 +955,7 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner,
new_driver->drvwrap.driver.remove = usb_unbind_interface;
new_driver->drvwrap.driver.owner = owner;
new_driver->drvwrap.driver.mod_name = mod_name;
+ new_driver->drvwrap.driver.dev_groups = new_driver->dev_groups;
spin_lock_init(&new_driver->dynids.lock);
INIT_LIST_HEAD(&new_driver->dynids.list);
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 1ac9c1e5f773..38f8b3e31762 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -257,6 +257,8 @@ static int generic_suspend(struct usb_device *udev, pm_message_t msg)
else
rc = usb_port_suspend(udev, msg);
+ if (rc == 0)
+ usbfs_notify_suspend(udev);
return rc;
}
@@ -273,6 +275,9 @@ static int generic_resume(struct usb_device *udev, pm_message_t msg)
rc = hcd_bus_resume(udev, msg);
else
rc = usb_port_resume(udev, msg);
+
+ if (rc == 0)
+ usbfs_notify_resume(udev);
return rc;
}
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 7537681355f6..9e26b0143a59 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -393,8 +393,7 @@ static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
static int check_root_hub_suspended(struct device *dev)
{
- struct pci_dev *pci_dev = to_pci_dev(dev);
- struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
if (HCD_RH_RUNNING(hcd)) {
dev_warn(dev, "Root hub is not suspended\n");
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8592c0344fe8..f225eaa98ff8 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1249,9 +1249,6 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
* To support host controllers with limited dma capabilities we provide dma
* bounce buffers. This feature can be enabled by initializing
* hcd->localmem_pool using usb_hcd_setup_local_mem().
- * For this to work properly the host controller code must first use the
- * function dma_declare_coherent_memory() to point out which memory area
- * that should be used for dma allocations.
*
* The initialized hcd->localmem_pool then tells the usb code to allocate all
* data for dma using the genalloc API.
@@ -2191,6 +2188,9 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
hcd->state = HC_STATE_RESUMING;
status = hcd->driver->bus_resume(hcd);
clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
+ if (status == 0)
+ status = usb_phy_roothub_calibrate(hcd->phy_roothub);
+
if (status == 0) {
struct usb_device *udev;
int port1;
@@ -2454,7 +2454,6 @@ struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
hcd->self.controller = dev;
hcd->self.sysdev = sysdev;
hcd->self.bus_name = bus_name;
- hcd->self.uses_dma = (sysdev->dma_mask != NULL);
timer_setup(&hcd->rh_timer, rh_timer_func, 0);
#ifdef CONFIG_PM
@@ -2764,6 +2763,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
}
hcd->rh_pollable = 1;
+ retval = usb_phy_roothub_calibrate(hcd->phy_roothub);
+ if (retval)
+ goto err_hcd_driver_setup;
+
/* NOTE: root hub and controller capabilities may not be the same */
if (device_can_wakeup(hcd->self.controller)
&& device_can_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c
index 7580493b867a..fb1588e7c282 100644
--- a/drivers/usb/core/phy.c
+++ b/drivers/usb/core/phy.c
@@ -151,6 +151,27 @@ err_out:
}
EXPORT_SYMBOL_GPL(usb_phy_roothub_set_mode);
+int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub)
+{
+ struct usb_phy_roothub *roothub_entry;
+ struct list_head *head;
+ int err;
+
+ if (!phy_roothub)
+ return 0;
+
+ head = &phy_roothub->list;
+
+ list_for_each_entry(roothub_entry, head, list) {
+ err = phy_calibrate(roothub_entry->phy);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate);
+
int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub)
{
struct usb_phy_roothub *roothub_entry;
diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h
index dad564e2d2d4..20a267cd986b 100644
--- a/drivers/usb/core/phy.h
+++ b/drivers/usb/core/phy.h
@@ -18,6 +18,7 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub,
enum phy_mode mode);
+int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub);
int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 1a06a4b5fbb1..bbbb35fa639f 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -285,6 +285,14 @@ static int usb_port_runtime_suspend(struct device *dev)
}
#endif
+static void usb_port_shutdown(struct device *dev)
+{
+ struct usb_port *port_dev = to_usb_port(dev);
+
+ if (port_dev->child)
+ usb_disable_usb2_hardware_lpm(port_dev->child);
+}
+
static const struct dev_pm_ops usb_port_pm_ops = {
#ifdef CONFIG_PM
.runtime_suspend = usb_port_runtime_suspend,
@@ -301,6 +309,7 @@ struct device_type usb_port_device_type = {
static struct device_driver usb_port_driver = {
.name = "usb",
.owner = THIS_MODULE,
+ .shutdown = usb_port_shutdown,
};
static int link_peers(struct usb_port *left, struct usb_port *right)
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0ab8738047da..f16c26dc079d 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -933,228 +933,6 @@ void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
}
EXPORT_SYMBOL_GPL(usb_free_coherent);
-/**
- * usb_buffer_map - create DMA mapping(s) for an urb
- * @urb: urb whose transfer_buffer/setup_packet will be mapped
- *
- * URB_NO_TRANSFER_DMA_MAP is added to urb->transfer_flags if the operation
- * succeeds. If the device is connected to this system through a non-DMA
- * controller, this operation always succeeds.
- *
- * This call would normally be used for an urb which is reused, perhaps
- * as the target of a large periodic transfer, with usb_buffer_dmasync()
- * calls to synchronize memory and dma state.
- *
- * Reverse the effect of this call with usb_buffer_unmap().
- *
- * Return: Either %NULL (indicating no buffer could be mapped), or @urb.
- *
- */
-#if 0
-struct urb *usb_buffer_map(struct urb *urb)
-{
- struct usb_bus *bus;
- struct device *controller;
-
- if (!urb
- || !urb->dev
- || !(bus = urb->dev->bus)
- || !(controller = bus->sysdev))
- return NULL;
-
- if (controller->dma_mask) {
- urb->transfer_dma = dma_map_single(controller,
- urb->transfer_buffer, urb->transfer_buffer_length,
- usb_pipein(urb->pipe)
- ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- /* FIXME generic api broken like pci, can't report errors */
- /* if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; */
- } else
- urb->transfer_dma = ~0;
- urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- return urb;
-}
-EXPORT_SYMBOL_GPL(usb_buffer_map);
-#endif /* 0 */
-
-/* XXX DISABLED, no users currently. If you wish to re-enable this
- * XXX please determine whether the sync is to transfer ownership of
- * XXX the buffer from device to cpu or vice verse, and thusly use the
- * XXX appropriate _for_{cpu,device}() method. -DaveM
- */
-#if 0
-
-/**
- * usb_buffer_dmasync - synchronize DMA and CPU view of buffer(s)
- * @urb: urb whose transfer_buffer/setup_packet will be synchronized
- */
-void usb_buffer_dmasync(struct urb *urb)
-{
- struct usb_bus *bus;
- struct device *controller;
-
- if (!urb
- || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
- || !urb->dev
- || !(bus = urb->dev->bus)
- || !(controller = bus->sysdev))
- return;
-
- if (controller->dma_mask) {
- dma_sync_single_for_cpu(controller,
- urb->transfer_dma, urb->transfer_buffer_length,
- usb_pipein(urb->pipe)
- ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- if (usb_pipecontrol(urb->pipe))
- dma_sync_single_for_cpu(controller,
- urb->setup_dma,
- sizeof(struct usb_ctrlrequest),
- DMA_TO_DEVICE);
- }
-}
-EXPORT_SYMBOL_GPL(usb_buffer_dmasync);
-#endif
-
-/**
- * usb_buffer_unmap - free DMA mapping(s) for an urb
- * @urb: urb whose transfer_buffer will be unmapped
- *
- * Reverses the effect of usb_buffer_map().
- */
-#if 0
-void usb_buffer_unmap(struct urb *urb)
-{
- struct usb_bus *bus;
- struct device *controller;
-
- if (!urb
- || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
- || !urb->dev
- || !(bus = urb->dev->bus)
- || !(controller = bus->sysdev))
- return;
-
- if (controller->dma_mask) {
- dma_unmap_single(controller,
- urb->transfer_dma, urb->transfer_buffer_length,
- usb_pipein(urb->pipe)
- ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- }
- urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP;
-}
-EXPORT_SYMBOL_GPL(usb_buffer_unmap);
-#endif /* 0 */
-
-#if 0
-/**
- * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
- * @dev: device to which the scatterlist will be mapped
- * @is_in: mapping transfer direction
- * @sg: the scatterlist to map
- * @nents: the number of entries in the scatterlist
- *
- * Return: Either < 0 (indicating no buffers could be mapped), or the
- * number of DMA mapping array entries in the scatterlist.
- *
- * Note:
- * The caller is responsible for placing the resulting DMA addresses from
- * the scatterlist into URB transfer buffer pointers, and for setting the
- * URB_NO_TRANSFER_DMA_MAP transfer flag in each of those URBs.
- *
- * Top I/O rates come from queuing URBs, instead of waiting for each one
- * to complete before starting the next I/O. This is particularly easy
- * to do with scatterlists. Just allocate and submit one URB for each DMA
- * mapping entry returned, stopping on the first error or when all succeed.
- * Better yet, use the usb_sg_*() calls, which do that (and more) for you.
- *
- * This call would normally be used when translating scatterlist requests,
- * rather than usb_buffer_map(), since on some hardware (with IOMMUs) it
- * may be able to coalesce mappings for improved I/O efficiency.
- *
- * Reverse the effect of this call with usb_buffer_unmap_sg().
- */
-int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
- struct scatterlist *sg, int nents)
-{
- struct usb_bus *bus;
- struct device *controller;
-
- if (!dev
- || !(bus = dev->bus)
- || !(controller = bus->sysdev)
- || !controller->dma_mask)
- return -EINVAL;
-
- /* FIXME generic api broken like pci, can't report errors */
- return dma_map_sg(controller, sg, nents,
- is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM;
-}
-EXPORT_SYMBOL_GPL(usb_buffer_map_sg);
-#endif
-
-/* XXX DISABLED, no users currently. If you wish to re-enable this
- * XXX please determine whether the sync is to transfer ownership of
- * XXX the buffer from device to cpu or vice verse, and thusly use the
- * XXX appropriate _for_{cpu,device}() method. -DaveM
- */
-#if 0
-
-/**
- * usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s)
- * @dev: device to which the scatterlist will be mapped
- * @is_in: mapping transfer direction
- * @sg: the scatterlist to synchronize
- * @n_hw_ents: the positive return value from usb_buffer_map_sg
- *
- * Use this when you are re-using a scatterlist's data buffers for
- * another USB request.
- */
-void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
- struct scatterlist *sg, int n_hw_ents)
-{
- struct usb_bus *bus;
- struct device *controller;
-
- if (!dev
- || !(bus = dev->bus)
- || !(controller = bus->sysdev)
- || !controller->dma_mask)
- return;
-
- dma_sync_sg_for_cpu(controller, sg, n_hw_ents,
- is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-}
-EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg);
-#endif
-
-#if 0
-/**
- * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
- * @dev: device to which the scatterlist will be mapped
- * @is_in: mapping transfer direction
- * @sg: the scatterlist to unmap
- * @n_hw_ents: the positive return value from usb_buffer_map_sg
- *
- * Reverses the effect of usb_buffer_map_sg().
- */
-void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
- struct scatterlist *sg, int n_hw_ents)
-{
- struct usb_bus *bus;
- struct device *controller;
-
- if (!dev
- || !(bus = dev->bus)
- || !(controller = bus->sysdev)
- || !controller->dma_mask)
- return;
-
- dma_unmap_sg(controller, sg, n_hw_ents,
- is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-}
-EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg);
-#endif
-
/*
* Notifications of device and interface registration
*/
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 0c9fde5ad052..cf4783cf661a 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -95,6 +95,9 @@ extern int usb_runtime_idle(struct device *dev);
extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev);
extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev);
+extern void usbfs_notify_suspend(struct usb_device *udev);
+extern void usbfs_notify_resume(struct usb_device *udev);
+
#else
static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index bff48a8a1984..6be10e496e10 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3224,14 +3224,15 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg,
struct dwc2_hsotg_ep *ep,
int result)
{
- struct dwc2_hsotg_req *req, *treq;
unsigned int size;
ep->req = NULL;
- list_for_each_entry_safe(req, treq, &ep->queue, queue)
- dwc2_hsotg_complete_request(hsotg, ep, req,
- result);
+ while (!list_empty(&ep->queue)) {
+ struct dwc2_hsotg_req *req = get_ep_head(ep);
+
+ dwc2_hsotg_complete_request(hsotg, ep, req, result);
+ }
if (!hsotg->dedicated_fifos)
return;
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 111787a137ee..81afe553aa66 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5062,13 +5062,13 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
dwc2_hc_driver.reset_device = dwc2_reset_device;
}
+ if (hsotg->params.host_dma)
+ dwc2_hc_driver.flags |= HCD_DMA;
+
hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev));
if (!hcd)
goto error1;
- if (!hsotg->params.host_dma)
- hcd->self.uses_dma = 0;
-
hcd->has_tt = 1;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 55f841a54015..31e090ac9f1e 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -404,10 +404,7 @@ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg)
device_property_read_u32(hsotg->dev, "g-np-tx-fifo-size",
&p->g_np_tx_fifo_size);
- num = device_property_read_u32_array(hsotg->dev,
- "g-tx-fifo-size",
- NULL, 0);
-
+ num = device_property_count_u32(hsotg->dev, "g-tx-fifo-size");
if (num > 0) {
num = min(num, 15);
memset(p->g_tx_fifo_size, 0,
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 80fd3c6dcd1c..3c6ce09a6db5 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -407,10 +407,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
spin_lock_init(&hsotg->lock);
hsotg->irq = platform_get_irq(dev, 0);
- if (hsotg->irq < 0) {
- dev_err(&dev->dev, "missing IRQ resource\n");
+ if (hsotg->irq < 0)
return hsotg->irq;
- }
dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
hsotg->irq);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c9bb93a2c81e..999ce5e84d3c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -168,7 +168,6 @@ static void __dwc3_set_mode(struct work_struct *work)
otg_set_vbus(dwc->usb2_phy->otg, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
- phy_calibrate(dwc->usb2_generic_phy);
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -252,12 +251,25 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
reg |= DWC3_DCTL_CSFTRST;
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ /*
+ * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit
+ * is cleared only after all the clocks are synchronized. This can
+ * take a little more than 50ms. Set the polling rate at 20ms
+ * for 10 times instead.
+ */
+ if (dwc3_is_usb31(dwc) && dwc->revision >= DWC3_USB31_REVISION_190A)
+ retries = 10;
+
do {
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (!(reg & DWC3_DCTL_CSFTRST))
goto done;
- udelay(1);
+ if (dwc3_is_usb31(dwc) &&
+ dwc->revision >= DWC3_USB31_REVISION_190A)
+ msleep(20);
+ else
+ udelay(1);
} while (--retries);
phy_exit(dwc->usb3_generic_phy);
@@ -267,11 +279,11 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
done:
/*
- * For DWC_usb31 controller, once DWC3_DCTL_CSFTRST bit is cleared,
- * we must wait at least 50ms before accessing the PHY domain
- * (synchronization delay). DWC_usb31 programming guide section 1.3.2.
+ * For DWC_usb31 controller 1.80a and prior, once DCTL.CSFRST bit
+ * is cleared, we must wait at least 50ms before accessing the PHY
+ * domain (synchronization delay).
*/
- if (dwc3_is_usb31(dwc))
+ if (dwc3_is_usb31(dwc) && dwc->revision <= DWC3_USB31_REVISION_180A)
msleep(50);
return 0;
@@ -686,8 +698,7 @@ static void dwc3_core_exit(struct dwc3 *dwc)
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
- clk_bulk_disable(dwc->num_clks, dwc->clks);
- clk_bulk_unprepare(dwc->num_clks, dwc->clks);
+ clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
reset_control_assert(dwc->reset);
}
@@ -813,8 +824,7 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
* result = 1, means INCRx burst mode supported.
* result > 1, means undefined length burst mode supported.
*/
- ntype = device_property_read_u32_array(dev,
- "snps,incr-burst-type-adjustment", NULL, 0);
+ ntype = device_property_count_u32(dev, "snps,incr-burst-type-adjustment");
if (ntype <= 0)
return;
@@ -1166,7 +1176,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
dev_err(dev, "failed to initialize host\n");
return ret;
}
- phy_calibrate(dwc->usb2_generic_phy);
break;
case USB_DR_MODE_OTG:
INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
@@ -1310,8 +1319,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
- dwc->hird_threshold = hird_threshold
- | (dwc->is_utmi_l1_suspend << 4);
+ dwc->hird_threshold = hird_threshold;
dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
dwc->rx_max_burst_prd = rx_max_burst_prd;
@@ -1436,7 +1444,7 @@ static int dwc3_probe(struct platform_device *pdev)
if (dev->of_node) {
dwc->num_clks = ARRAY_SIZE(dwc3_core_clks);
- ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks);
+ ret = devm_clk_bulk_get(dev, dwc->num_clks, dwc->clks);
if (ret == -EPROBE_DEFER)
return ret;
/*
@@ -1449,16 +1457,12 @@ static int dwc3_probe(struct platform_device *pdev)
ret = reset_control_deassert(dwc->reset);
if (ret)
- goto put_clks;
+ return ret;
- ret = clk_bulk_prepare(dwc->num_clks, dwc->clks);
+ ret = clk_bulk_prepare_enable(dwc->num_clks, dwc->clks);
if (ret)
goto assert_reset;
- ret = clk_bulk_enable(dwc->num_clks, dwc->clks);
- if (ret)
- goto unprepare_clks;
-
if (!dwc3_core_is_valid(dwc)) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
@@ -1531,13 +1535,9 @@ err1:
pm_runtime_disable(&pdev->dev);
disable_clks:
- clk_bulk_disable(dwc->num_clks, dwc->clks);
-unprepare_clks:
- clk_bulk_unprepare(dwc->num_clks, dwc->clks);
+ clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
assert_reset:
reset_control_assert(dwc->reset);
-put_clks:
- clk_bulk_put(dwc->num_clks, dwc->clks);
return ret;
}
@@ -1560,7 +1560,6 @@ static int dwc3_remove(struct platform_device *pdev)
dwc3_free_event_buffers(dwc);
dwc3_free_scratch_buffers(dwc);
- clk_bulk_put(dwc->num_clks, dwc->clks);
return 0;
}
@@ -1574,14 +1573,10 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
if (ret)
return ret;
- ret = clk_bulk_prepare(dwc->num_clks, dwc->clks);
+ ret = clk_bulk_prepare_enable(dwc->num_clks, dwc->clks);
if (ret)
goto assert_reset;
- ret = clk_bulk_enable(dwc->num_clks, dwc->clks);
- if (ret)
- goto unprepare_clks;
-
ret = dwc3_core_init(dwc);
if (ret)
goto disable_clks;
@@ -1589,9 +1584,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
return 0;
disable_clks:
- clk_bulk_disable(dwc->num_clks, dwc->clks);
-unprepare_clks:
- clk_bulk_unprepare(dwc->num_clks, dwc->clks);
+ clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
assert_reset:
reset_control_assert(dwc->reset);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 3dd783b889cb..1c8b349379af 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1137,6 +1137,8 @@ struct dwc3 {
#define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31)
#define DWC3_USB31_REVISION_160A (0x3136302a | DWC3_REVISION_IS_DWC31)
#define DWC3_USB31_REVISION_170A (0x3137302a | DWC3_REVISION_IS_DWC31)
+#define DWC3_USB31_REVISION_180A (0x3138302a | DWC3_REVISION_IS_DWC31)
+#define DWC3_USB31_REVISION_190A (0x3139302a | DWC3_REVISION_IS_DWC31)
u32 version_type;
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 068259fdfb0c..9baabed87d61 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -246,258 +246,6 @@ static inline const char *dwc3_gadget_event_string(char *str, size_t size,
return str;
}
-static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str,
- size_t size)
-{
- switch (t & USB_RECIP_MASK) {
- case USB_RECIP_DEVICE:
- snprintf(str, size, "Get Device Status(Length = %d)", l);
- break;
- case USB_RECIP_INTERFACE:
- snprintf(str, size, "Get Interface Status(Intf = %d, Length = %d)",
- i, l);
- break;
- case USB_RECIP_ENDPOINT:
- snprintf(str, size, "Get Endpoint Status(ep%d%s)",
- i & ~USB_DIR_IN,
- i & USB_DIR_IN ? "in" : "out");
- break;
- }
-}
-
-static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v,
- __u16 i, char *str, size_t size)
-{
- switch (t & USB_RECIP_MASK) {
- case USB_RECIP_DEVICE:
- snprintf(str, size, "%s Device Feature(%s%s)",
- b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
- ({char *s;
- switch (v) {
- case USB_DEVICE_SELF_POWERED:
- s = "Self Powered";
- break;
- case USB_DEVICE_REMOTE_WAKEUP:
- s = "Remote Wakeup";
- break;
- case USB_DEVICE_TEST_MODE:
- s = "Test Mode";
- break;
- case USB_DEVICE_U1_ENABLE:
- s = "U1 Enable";
- break;
- case USB_DEVICE_U2_ENABLE:
- s = "U2 Enable";
- break;
- case USB_DEVICE_LTM_ENABLE:
- s = "LTM Enable";
- break;
- default:
- s = "UNKNOWN";
- } s; }),
- v == USB_DEVICE_TEST_MODE ?
- ({ char *s;
- switch (i) {
- case TEST_J:
- s = ": TEST_J";
- break;
- case TEST_K:
- s = ": TEST_K";
- break;
- case TEST_SE0_NAK:
- s = ": TEST_SE0_NAK";
- break;
- case TEST_PACKET:
- s = ": TEST_PACKET";
- break;
- case TEST_FORCE_EN:
- s = ": TEST_FORCE_EN";
- break;
- default:
- s = ": UNKNOWN";
- } s; }) : "");
- break;
- case USB_RECIP_INTERFACE:
- snprintf(str, size, "%s Interface Feature(%s)",
- b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
- v == USB_INTRF_FUNC_SUSPEND ?
- "Function Suspend" : "UNKNOWN");
- break;
- case USB_RECIP_ENDPOINT:
- snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)",
- b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
- v == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN",
- i & ~USB_DIR_IN,
- i & USB_DIR_IN ? "in" : "out");
- break;
- }
-}
-
-static inline void dwc3_decode_set_address(__u16 v, char *str, size_t size)
-{
- snprintf(str, size, "Set Address(Addr = %02x)", v);
-}
-
-static inline void dwc3_decode_get_set_descriptor(__u8 t, __u8 b, __u16 v,
- __u16 i, __u16 l, char *str, size_t size)
-{
- snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)",
- b == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set",
- ({ char *s;
- switch (v >> 8) {
- case USB_DT_DEVICE:
- s = "Device";
- break;
- case USB_DT_CONFIG:
- s = "Configuration";
- break;
- case USB_DT_STRING:
- s = "String";
- break;
- case USB_DT_INTERFACE:
- s = "Interface";
- break;
- case USB_DT_ENDPOINT:
- s = "Endpoint";
- break;
- case USB_DT_DEVICE_QUALIFIER:
- s = "Device Qualifier";
- break;
- case USB_DT_OTHER_SPEED_CONFIG:
- s = "Other Speed Config";
- break;
- case USB_DT_INTERFACE_POWER:
- s = "Interface Power";
- break;
- case USB_DT_OTG:
- s = "OTG";
- break;
- case USB_DT_DEBUG:
- s = "Debug";
- break;
- case USB_DT_INTERFACE_ASSOCIATION:
- s = "Interface Association";
- break;
- case USB_DT_BOS:
- s = "BOS";
- break;
- case USB_DT_DEVICE_CAPABILITY:
- s = "Device Capability";
- break;
- case USB_DT_PIPE_USAGE:
- s = "Pipe Usage";
- break;
- case USB_DT_SS_ENDPOINT_COMP:
- s = "SS Endpoint Companion";
- break;
- case USB_DT_SSP_ISOC_ENDPOINT_COMP:
- s = "SSP Isochronous Endpoint Companion";
- break;
- default:
- s = "UNKNOWN";
- break;
- } s; }), v & 0xff, l);
-}
-
-
-static inline void dwc3_decode_get_configuration(__u16 l, char *str,
- size_t size)
-{
- snprintf(str, size, "Get Configuration(Length = %d)", l);
-}
-
-static inline void dwc3_decode_set_configuration(__u8 v, char *str, size_t size)
-{
- snprintf(str, size, "Set Configuration(Config = %d)", v);
-}
-
-static inline void dwc3_decode_get_intf(__u16 i, __u16 l, char *str,
- size_t size)
-{
- snprintf(str, size, "Get Interface(Intf = %d, Length = %d)", i, l);
-}
-
-static inline void dwc3_decode_set_intf(__u8 v, __u16 i, char *str, size_t size)
-{
- snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)", i, v);
-}
-
-static inline void dwc3_decode_synch_frame(__u16 i, __u16 l, char *str,
- size_t size)
-{
- snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)", i, l);
-}
-
-static inline void dwc3_decode_set_sel(__u16 l, char *str, size_t size)
-{
- snprintf(str, size, "Set SEL(Length = %d)", l);
-}
-
-static inline void dwc3_decode_set_isoch_delay(__u8 v, char *str, size_t size)
-{
- snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", v);
-}
-
-/**
- * dwc3_decode_ctrl - returns a string represetion of ctrl request
- */
-static inline const char *dwc3_decode_ctrl(char *str, size_t size,
- __u8 bRequestType, __u8 bRequest, __u16 wValue, __u16 wIndex,
- __u16 wLength)
-{
- switch (bRequest) {
- case USB_REQ_GET_STATUS:
- dwc3_decode_get_status(bRequestType, wIndex, wLength, str,
- size);
- break;
- case USB_REQ_CLEAR_FEATURE:
- case USB_REQ_SET_FEATURE:
- dwc3_decode_set_clear_feature(bRequestType, bRequest, wValue,
- wIndex, str, size);
- break;
- case USB_REQ_SET_ADDRESS:
- dwc3_decode_set_address(wValue, str, size);
- break;
- case USB_REQ_GET_DESCRIPTOR:
- case USB_REQ_SET_DESCRIPTOR:
- dwc3_decode_get_set_descriptor(bRequestType, bRequest, wValue,
- wIndex, wLength, str, size);
- break;
- case USB_REQ_GET_CONFIGURATION:
- dwc3_decode_get_configuration(wLength, str, size);
- break;
- case USB_REQ_SET_CONFIGURATION:
- dwc3_decode_set_configuration(wValue, str, size);
- break;
- case USB_REQ_GET_INTERFACE:
- dwc3_decode_get_intf(wIndex, wLength, str, size);
- break;
- case USB_REQ_SET_INTERFACE:
- dwc3_decode_set_intf(wValue, wIndex, str, size);
- break;
- case USB_REQ_SYNCH_FRAME:
- dwc3_decode_synch_frame(wIndex, wLength, str, size);
- break;
- case USB_REQ_SET_SEL:
- dwc3_decode_set_sel(wLength, str, size);
- break;
- case USB_REQ_SET_ISOCH_DELAY:
- dwc3_decode_set_isoch_delay(wValue, str, size);
- break;
- default:
- snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x",
- bRequestType, bRequest,
- cpu_to_le16(wValue) & 0xff,
- cpu_to_le16(wValue) >> 8,
- cpu_to_le16(wIndex) & 0xff,
- cpu_to_le16(wIndex) >> 8,
- cpu_to_le16(wLength) & 0xff,
- cpu_to_le16(wLength) >> 8);
- }
-
- return str;
-}
-
/**
* dwc3_ep_event_string - returns event name
* @event: then event code
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index cbee5fb9b9fb..1e14a6f4884b 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -81,7 +81,6 @@ static int kdwc3_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
struct dwc3_keystone *kdwc;
- struct resource *res;
int error, irq;
kdwc = devm_kzalloc(dev, sizeof(*kdwc), GFP_KERNEL);
@@ -92,8 +91,7 @@ static int kdwc3_probe(struct platform_device *pdev)
kdwc->dev = dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- kdwc->usbss = devm_ioremap_resource(dev, res);
+ kdwc->usbss = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(kdwc->usbss))
return PTR_ERR(kdwc->usbss);
@@ -112,7 +110,6 @@ static int kdwc3_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(&pdev->dev, "missing irq\n");
error = irq;
goto err_irq;
}
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bca7e92a10e9..8a3ec1a951fe 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -386,7 +386,6 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
void __iomem *base;
- struct resource *res;
enum phy_mode otg_id;
int ret, i, irq;
@@ -394,8 +393,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
+ base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
@@ -564,7 +562,13 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
- int i;
+ int i, ret;
+
+ if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+ ret = regulator_disable(priv->vbus);
+ if (ret)
+ return ret;
+ }
for (i = 0 ; i < PHY_COUNT ; ++i) {
phy_power_off(priv->phys[i]);
@@ -599,6 +603,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
return ret;
}
+ if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+ ret = regulator_enable(priv->vbus);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index ed8b86517675..8c3de2d258bf 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -14,7 +14,6 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/dwc3-omap.h>
#include <linux/pm_runtime.h>
#include <linux/dma-mapping.h>
#include <linux/ioport.h>
@@ -106,6 +105,12 @@
#define USBOTGSS_UTMI_OTG_CTRL_SESSVALID BIT(2)
#define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID BIT(1)
+enum dwc3_omap_utmi_mode {
+ DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
+ DWC3_OMAP_UTMI_MODE_HW,
+ DWC3_OMAP_UTMI_MODE_SW,
+};
+
struct dwc3_omap {
struct device *dev;
@@ -446,7 +451,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
struct device_node *node = pdev->dev.of_node;
struct dwc3_omap *omap;
- struct resource *res;
struct device *dev = &pdev->dev;
struct regulator *vbus_reg = NULL;
@@ -469,13 +473,10 @@ static int dwc3_omap_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, omap);
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "missing IRQ resource: %d\n", irq);
+ if (irq < 0)
return irq;
- }
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
+ base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
index 16081383c401..c682420f25ca 100644
--- a/drivers/usb/dwc3/dwc3-st.c
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -255,24 +255,26 @@ static int st_dwc3_probe(struct platform_device *pdev)
if (!child) {
dev_err(&pdev->dev, "failed to find dwc3 core node\n");
ret = -ENODEV;
- goto undo_softreset;
+ goto err_node_put;
}
/* Allocate and initialize the core */
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(dev, "failed to add dwc3 core\n");
- goto undo_softreset;
+ goto err_node_put;
}
child_pdev = of_find_device_by_node(child);
if (!child_pdev) {
dev_err(dev, "failed to find dwc3 core device\n");
ret = -ENODEV;
- goto undo_softreset;
+ goto err_node_put;
}
dwc3_data->dr_mode = usb_get_dr_mode(&child_pdev->dev);
+ of_node_put(child);
+ of_dev_put(child_pdev);
/*
* Configure the USB port as device or host according to the static
@@ -292,6 +294,8 @@ static int st_dwc3_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dwc3_data);
return 0;
+err_node_put:
+ of_node_put(child);
undo_softreset:
reset_control_assert(dwc3_data->rstc_rst);
undo_powerdown:
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 173f5329d3d9..8adb59f8e4f1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2078,6 +2078,26 @@ static void dwc3_gadget_config_params(struct usb_gadget *g,
{
struct dwc3 *dwc = gadget_to_dwc(g);
+ params->besl_baseline = USB_DEFAULT_BESL_UNSPECIFIED;
+ params->besl_deep = USB_DEFAULT_BESL_UNSPECIFIED;
+
+ /* Recommended BESL */
+ if (!dwc->dis_enblslpm_quirk) {
+ /*
+ * If the recommended BESL baseline is 0 or if the BESL deep is
+ * less than 2, Microsoft's Windows 10 host usb stack will issue
+ * a usb reset immediately after it receives the extended BOS
+ * descriptor and the enumeration will fail. To maintain
+ * compatibility with the Windows' usb stack, let's set the
+ * recommended BESL baseline to 1 and clamp the BESL deep to be
+ * within 2 to 15.
+ */
+ params->besl_baseline = 1;
+ if (dwc->is_utmi_l1_suspend)
+ params->besl_deep =
+ clamp_t(u8, dwc->hird_threshold, 2, 15);
+ }
+
/* U1 Device exit Latency */
if (dwc->dis_u1_entry_quirk)
params->bU1devExitLat = 0;
@@ -2868,7 +2888,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
- reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold);
+ reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold |
+ (dwc->is_utmi_l1_suspend << 4));
/*
* When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
@@ -3318,7 +3339,6 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
- dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG;
dwc->gadget.lpm_capable = true;
/*
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index f55947294f7c..8deea8c91e03 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -85,7 +85,7 @@ int dwc3_host_init(struct dwc3 *dwc)
DWC3_XHCI_RESOURCES_NUM);
if (ret) {
dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
- goto err1;
+ goto err;
}
memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
@@ -112,37 +112,23 @@ int dwc3_host_init(struct dwc3 *dwc)
ret = platform_device_add_properties(xhci, props);
if (ret) {
dev_err(dwc->dev, "failed to add properties to xHCI\n");
- goto err1;
+ goto err;
}
}
- phy_create_lookup(dwc->usb2_generic_phy, "usb2-phy",
- dev_name(dwc->dev));
- phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
- dev_name(dwc->dev));
-
ret = platform_device_add(xhci);
if (ret) {
dev_err(dwc->dev, "failed to register xHCI device\n");
- goto err2;
+ goto err;
}
return 0;
-err2:
- phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
- dev_name(dwc->dev));
- phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
- dev_name(dwc->dev));
-err1:
+err:
platform_device_put(xhci);
return ret;
}
void dwc3_host_exit(struct dwc3 *dwc)
{
- phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
- dev_name(dwc->dev));
- phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
- dev_name(dwc->dev));
platform_device_unregister(dwc->xhci);
}
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
index 818a63da1a44..9edff17111f7 100644
--- a/drivers/usb/dwc3/trace.h
+++ b/drivers/usb/dwc3/trace.h
@@ -86,7 +86,7 @@ DECLARE_EVENT_CLASS(dwc3_log_ctrl,
__entry->wIndex = le16_to_cpu(ctrl->wIndex);
__entry->wLength = le16_to_cpu(ctrl->wLength);
),
- TP_printk("%s", dwc3_decode_ctrl(__get_str(str), DWC3_MSG_MAX,
+ TP_printk("%s", usb_decode_ctrl(__get_str(str), DWC3_MSG_MAX,
__entry->bRequestType,
__entry->bRequest, __entry->wValue,
__entry->wIndex, __entry->wLength)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 76883ff4f5bb..d516e8d6cd7f 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -612,6 +612,7 @@ static int bos_desc(struct usb_composite_dev *cdev)
struct usb_ext_cap_descriptor *usb_ext;
struct usb_dcd_config_params dcd_config_params;
struct usb_bos_descriptor *bos = cdev->req->buf;
+ unsigned int besl = 0;
bos->bLength = USB_DT_BOS_SIZE;
bos->bDescriptorType = USB_DT_BOS;
@@ -619,6 +620,29 @@ static int bos_desc(struct usb_composite_dev *cdev)
bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
bos->bNumDeviceCaps = 0;
+ /* Get Controller configuration */
+ if (cdev->gadget->ops->get_config_params) {
+ cdev->gadget->ops->get_config_params(cdev->gadget,
+ &dcd_config_params);
+ } else {
+ dcd_config_params.besl_baseline =
+ USB_DEFAULT_BESL_UNSPECIFIED;
+ dcd_config_params.besl_deep =
+ USB_DEFAULT_BESL_UNSPECIFIED;
+ dcd_config_params.bU1devExitLat =
+ USB_DEFAULT_U1_DEV_EXIT_LAT;
+ dcd_config_params.bU2DevExitLat =
+ cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
+ }
+
+ if (dcd_config_params.besl_baseline != USB_DEFAULT_BESL_UNSPECIFIED)
+ besl = USB_BESL_BASELINE_VALID |
+ USB_SET_BESL_BASELINE(dcd_config_params.besl_baseline);
+
+ if (dcd_config_params.besl_deep != USB_DEFAULT_BESL_UNSPECIFIED)
+ besl |= USB_BESL_DEEP_VALID |
+ USB_SET_BESL_DEEP(dcd_config_params.besl_deep);
+
/*
* A SuperSpeed device shall include the USB2.0 extension descriptor
* and shall support LPM when operating in USB2.0 HS mode.
@@ -629,7 +653,8 @@ static int bos_desc(struct usb_composite_dev *cdev)
usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
- usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT);
+ usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT |
+ USB_BESL_SUPPORT | besl);
/*
* The Superspeed USB Capability descriptor shall be implemented by all
@@ -650,17 +675,6 @@ static int bos_desc(struct usb_composite_dev *cdev)
USB_HIGH_SPEED_OPERATION |
USB_5GBPS_OPERATION);
ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
-
- /* Get Controller configuration */
- if (cdev->gadget->ops->get_config_params) {
- cdev->gadget->ops->get_config_params(cdev->gadget,
- &dcd_config_params);
- } else {
- dcd_config_params.bU1devExitLat =
- USB_DEFAULT_U1_DEV_EXIT_LAT;
- dcd_config_params.bU2DevExitLat =
- cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
- }
ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index db3628be38c0..90b134d5dca9 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -65,14 +65,16 @@ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
void ast_vhub_nuke(struct ast_vhub_ep *ep, int status)
{
struct ast_vhub_req *req;
-
- EPDBG(ep, "Nuking\n");
+ int count = 0;
/* Beware, lock will be dropped & req-acquired by done() */
while (!list_empty(&ep->queue)) {
req = list_first_entry(&ep->queue, struct ast_vhub_req, queue);
ast_vhub_done(ep, req, status);
+ count++;
}
+ if (count)
+ EPDBG(ep, "Nuked %d request(s)\n", count);
}
struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep,
@@ -348,7 +350,6 @@ static int ast_vhub_probe(struct platform_device *pdev)
/* Find interrupt and install handler */
vhub->irq = platform_get_irq(pdev, 0);
if (vhub->irq < 0) {
- dev_err(&pdev->dev, "Failed to get interrupt\n");
rc = vhub->irq;
goto err;
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
index 6b1b16b17d7d..4008e7a51188 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
@@ -50,11 +50,14 @@ void ast_vhub_dev_irq(struct ast_vhub_dev *d)
static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
{
- u32 reg, hmsk;
+ u32 reg, hmsk, i;
if (d->enabled)
return;
+ /* Cleanup EP0 state */
+ ast_vhub_reset_ep0(d);
+
/* Enable device and its EP0 interrupts */
reg = VHUB_DEV_EN_ENABLE_PORT |
VHUB_DEV_EN_EP0_IN_ACK_IRQEN |
@@ -73,6 +76,19 @@ static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
/* Set EP0 DMA buffer address */
writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA);
+ /* Clear stall on all EPs */
+ for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) {
+ struct ast_vhub_ep *ep = d->epns[i];
+
+ if (ep && (ep->epn.stalled || ep->epn.wedged)) {
+ ep->epn.stalled = false;
+ ep->epn.wedged = false;
+ ast_vhub_update_epn_stall(ep);
+ }
+ }
+
+ /* Additional cleanups */
+ d->wakeup_en = false;
d->enabled = true;
}
@@ -93,7 +109,6 @@ static void ast_vhub_dev_disable(struct ast_vhub_dev *d)
writel(0, d->regs + AST_VHUB_DEV_EN_CTRL);
d->gadget.speed = USB_SPEED_UNKNOWN;
d->enabled = false;
- d->suspended = false;
}
static int ast_vhub_dev_feature(struct ast_vhub_dev *d,
@@ -201,14 +216,19 @@ int ast_vhub_std_dev_request(struct ast_vhub_ep *ep,
u16 wValue, wIndex;
/* No driver, we shouldn't be enabled ... */
- if (!d->driver || !d->enabled || d->suspended) {
+ if (!d->driver || !d->enabled) {
EPDBG(ep,
- "Device is wrong state driver=%p enabled=%d"
- " suspended=%d\n",
- d->driver, d->enabled, d->suspended);
+ "Device is wrong state driver=%p enabled=%d\n",
+ d->driver, d->enabled);
return std_req_stall;
}
+ /*
+ * Note: we used to reject/stall requests while suspended,
+ * we don't do that anymore as we seem to have cases of
+ * mass storage getting very upset.
+ */
+
/* First packet, grab speed */
if (d->gadget.speed == USB_SPEED_UNKNOWN) {
d->gadget.speed = ep->vhub->speed;
@@ -449,8 +469,7 @@ static const struct usb_gadget_ops ast_vhub_udc_ops = {
void ast_vhub_dev_suspend(struct ast_vhub_dev *d)
{
- d->suspended = true;
- if (d->driver) {
+ if (d->driver && d->driver->suspend) {
spin_unlock(&d->vhub->lock);
d->driver->suspend(&d->gadget);
spin_lock(&d->vhub->lock);
@@ -459,8 +478,7 @@ void ast_vhub_dev_suspend(struct ast_vhub_dev *d)
void ast_vhub_dev_resume(struct ast_vhub_dev *d)
{
- d->suspended = false;
- if (d->driver) {
+ if (d->driver && d->driver->resume) {
spin_unlock(&d->vhub->lock);
d->driver->resume(&d->gadget);
spin_lock(&d->vhub->lock);
@@ -469,46 +487,28 @@ void ast_vhub_dev_resume(struct ast_vhub_dev *d)
void ast_vhub_dev_reset(struct ast_vhub_dev *d)
{
- /*
- * If speed is not set, we enable the port. If it is,
- * send reset to the gadget and reset "speed".
- *
- * Speed is an indication that we have got the first
- * setup packet to the device.
- */
- if (d->gadget.speed == USB_SPEED_UNKNOWN && !d->enabled) {
- DDBG(d, "Reset at unknown speed of disabled device, enabling...\n");
- ast_vhub_dev_enable(d);
- d->suspended = false;
+ /* No driver, just disable the device and return */
+ if (!d->driver) {
+ ast_vhub_dev_disable(d);
+ return;
}
- if (d->gadget.speed != USB_SPEED_UNKNOWN && d->driver) {
- unsigned int i;
- DDBG(d, "Reset at known speed of bound device, resetting...\n");
+ /* If the port isn't enabled, just enable it */
+ if (!d->enabled) {
+ DDBG(d, "Reset of disabled device, enabling...\n");
+ ast_vhub_dev_enable(d);
+ } else {
+ DDBG(d, "Reset of enabled device, resetting...\n");
spin_unlock(&d->vhub->lock);
- d->driver->reset(&d->gadget);
+ usb_gadget_udc_reset(&d->gadget, d->driver);
spin_lock(&d->vhub->lock);
/*
- * Disable/re-enable HW, this will clear the address
+ * Disable and maybe re-enable HW, this will clear the address
* and speed setting.
*/
ast_vhub_dev_disable(d);
ast_vhub_dev_enable(d);
-
- /* Clear stall on all EPs */
- for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) {
- struct ast_vhub_ep *ep = d->epns[i];
-
- if (ep && ep->epn.stalled) {
- ep->epn.stalled = false;
- ast_vhub_update_epn_stall(ep);
- }
- }
-
- /* Additional cleanups */
- d->wakeup_en = false;
- d->suspended = false;
}
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
index e2927fb083cf..022b777b85f8 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
@@ -105,18 +105,20 @@ void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep)
(crq.bRequestType & USB_DIR_IN) ? "in" : "out",
ep->ep0.state);
- /* Check our state, cancel pending requests if needed */
- if (ep->ep0.state != ep0_state_token) {
+ /*
+ * Check our state, cancel pending requests if needed
+ *
+ * Note: Under some circumstances, we can get a new setup
+ * packet while waiting for the stall ack, just accept it.
+ *
+ * In any case, a SETUP packet in wrong state should have
+ * reset the HW state machine, so let's just log, nuke
+ * requests, move on.
+ */
+ if (ep->ep0.state != ep0_state_token &&
+ ep->ep0.state != ep0_state_stall) {
EPDBG(ep, "wrong state\n");
ast_vhub_nuke(ep, -EIO);
-
- /*
- * Accept the packet regardless, this seems to happen
- * when stalling a SETUP packet that has an OUT data
- * phase.
- */
- ast_vhub_nuke(ep, 0);
- goto stall;
}
/* Calculate next state for EP0 */
@@ -165,7 +167,7 @@ void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep)
stall:
EPDBG(ep, "stalling\n");
writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat);
- ep->ep0.state = ep0_state_status;
+ ep->ep0.state = ep0_state_stall;
ep->ep0.dir_in = false;
return;
@@ -299,8 +301,8 @@ void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack)
if ((ep->ep0.dir_in && (stat & VHUB_EP0_TX_BUFF_RDY)) ||
(!ep->ep0.dir_in && (stat & VHUB_EP0_RX_BUFF_RDY)) ||
(ep->ep0.dir_in != in_ack)) {
+ /* In that case, ignore interrupt */
dev_warn(dev, "irq state mismatch");
- stall = true;
break;
}
/*
@@ -335,12 +337,22 @@ void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack)
dev_warn(dev, "status direction mismatch\n");
stall = true;
}
+ break;
+ case ep0_state_stall:
+ /*
+ * There shouldn't be any request left, but nuke just in case
+ * otherwise the stale request will block subsequent ones
+ */
+ ast_vhub_nuke(ep, -EIO);
+ break;
}
- /* Reset to token state */
- ep->ep0.state = ep0_state_token;
- if (stall)
+ /* Reset to token state or stall */
+ if (stall) {
writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat);
+ ep->ep0.state = ep0_state_stall;
+ } else
+ ep->ep0.state = ep0_state_token;
}
static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
@@ -367,7 +379,7 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
return -EINVAL;
/* Disabled device */
- if (ep->dev && (!ep->dev->enabled || ep->dev->suspended))
+ if (ep->dev && !ep->dev->enabled)
return -ESHUTDOWN;
/* Data, no buffer and not internal ? */
@@ -390,8 +402,12 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
spin_lock_irqsave(&vhub->lock, flags);
/* EP0 can only support a single request at a time */
- if (!list_empty(&ep->queue) || ep->ep0.state == ep0_state_token) {
+ if (!list_empty(&ep->queue) ||
+ ep->ep0.state == ep0_state_token ||
+ ep->ep0.state == ep0_state_stall) {
dev_warn(dev, "EP0: Request in wrong state\n");
+ EPVDBG(ep, "EP0: list_empty=%d state=%d\n",
+ list_empty(&ep->queue), ep->ep0.state);
spin_unlock_irqrestore(&vhub->lock, flags);
return -EBUSY;
}
@@ -459,6 +475,15 @@ static const struct usb_ep_ops ast_vhub_ep0_ops = {
.free_request = ast_vhub_free_request,
};
+void ast_vhub_reset_ep0(struct ast_vhub_dev *dev)
+{
+ struct ast_vhub_ep *ep = &dev->ep0;
+
+ ast_vhub_nuke(ep, -EIO);
+ ep->ep0.state = ep0_state_token;
+}
+
+
void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep,
struct ast_vhub_dev *dev)
{
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 35941dc125f9..7475c74aa5c5 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -352,7 +352,7 @@ static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req,
/* Endpoint enabled ? */
if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx ||
- !ep->dev->enabled || ep->dev->suspended) {
+ !ep->dev->enabled) {
EPDBG(ep, "Enqueuing request on wrong or disabled EP\n");
return -ESHUTDOWN;
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
index 7c040f56100e..19b3517e04c0 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -449,8 +449,15 @@ static void ast_vhub_change_port_stat(struct ast_vhub *vhub,
USB_PORT_STAT_C_OVERCURRENT |
USB_PORT_STAT_C_RESET |
USB_PORT_STAT_C_L1;
- p->change |= chg;
+ /*
+ * We only set USB_PORT_STAT_C_ENABLE if we are disabling
+ * the port as per USB spec, otherwise MacOS gets upset
+ */
+ if (p->status & USB_PORT_STAT_ENABLE)
+ chg &= ~USB_PORT_STAT_C_ENABLE;
+
+ p->change = chg;
ast_vhub_update_hub_ep1(vhub, port);
}
}
@@ -723,6 +730,12 @@ enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep,
case ClearPortFeature:
EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue);
return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue);
+ case ClearTTBuffer:
+ case ResetTT:
+ case StopTT:
+ return std_req_complete;
+ case GetTTState:
+ return ast_vhub_simple_reply(ep, 0, 0, 0, 0);
default:
EPDBG(ep, "Unknown class request\n");
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index 4ed03d33a5a9..761919e220d3 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -257,6 +257,7 @@ enum ep0_state {
ep0_state_token,
ep0_state_data,
ep0_state_status,
+ ep0_state_stall,
};
/*
@@ -353,7 +354,6 @@ struct ast_vhub_dev {
struct usb_gadget_driver *driver;
bool registered : 1;
bool wakeup_en : 1;
- bool suspended : 1;
bool enabled : 1;
/* Endpoint structures */
@@ -507,6 +507,7 @@ void ast_vhub_init_hw(struct ast_vhub *vhub);
/* ep0.c */
void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack);
void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep);
+void ast_vhub_reset_ep0(struct ast_vhub_dev *dev);
void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep,
struct ast_vhub_dev *dev);
int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len);
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 503d275bc4c4..86ffc8307864 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -327,6 +327,7 @@ static int usba_config_fifo_table(struct usba_udc *udc)
switch (fifo_mode) {
default:
fifo_mode = 0;
+ /* fall through */
case 0:
udc->fifo_cfg = NULL;
n = 0;
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
index c1fcc77403ea..97b16463f3ef 100644
--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -2328,10 +2328,8 @@ static int bcm63xx_udc_probe(struct platform_device *pdev)
/* IRQ resource #0: control interrupt (VBUS, speed, etc.) */
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "missing IRQ resource #0\n");
+ if (irq < 0)
goto out_uninit;
- }
if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0,
dev_name(dev), udc) < 0)
goto report_request_failure;
@@ -2339,10 +2337,8 @@ static int bcm63xx_udc_probe(struct platform_device *pdev)
/* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */
for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
irq = platform_get_irq(pdev, i + 1);
- if (irq < 0) {
- dev_err(dev, "missing IRQ resource #%d\n", i + 1);
+ if (irq < 0)
goto out_uninit;
- }
if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0,
dev_name(dev), &udc->iudma[i]) < 0)
goto report_request_failure;
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index ccbd1d34eb2a..cc4a16e253ac 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -515,10 +515,8 @@ static int bdc_probe(struct platform_device *pdev)
return -ENOMEM;
}
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "platform_get_irq failed:%d\n", irq);
+ if (irq < 0)
return irq;
- }
spin_lock_init(&bdc->lock);
platform_set_drvdata(pdev, bdc);
bdc->irq = irq;
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 7cf34beb50df..92af8dc98c3d 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1143,7 +1143,7 @@ static int check_pending_gadget_drivers(struct usb_udc *udc)
dev_name(&udc->dev)) == 0) {
ret = udc_bind_to_driver(udc, driver);
if (ret != -EPROBE_DEFER)
- list_del(&driver->pending);
+ list_del_init(&driver->pending);
break;
}
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 729e60e49564..7a0e9a58c2d8 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2134,19 +2134,15 @@ static int gr_probe(struct platform_device *pdev)
return PTR_ERR(regs);
dev->irq = platform_get_irq(pdev, 0);
- if (dev->irq <= 0) {
- dev_err(dev->dev, "No irq found\n");
+ if (dev->irq <= 0)
return -ENODEV;
- }
/* Some core configurations has separate irqs for IN and OUT events */
dev->irqi = platform_get_irq(pdev, 1);
if (dev->irqi > 0) {
dev->irqo = platform_get_irq(pdev, 2);
- if (dev->irqo <= 0) {
- dev_err(dev->dev, "Found irqi but not irqo\n");
+ if (dev->irqo <= 0)
return -ENODEV;
- }
} else {
dev->irqi = 0;
}
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index c65aed3e84c7..b3e073fb88c6 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -741,7 +741,6 @@ static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd,
* response data */
static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
{
- u32 tmp;
int to = 1000;
/* Write a command and read data from the protocol engine */
@@ -751,7 +750,6 @@ static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
/* Write command code */
udc_protocol_cmd_w(udc, cmd);
- tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL))
&& (to > 0))
to--;
@@ -1991,7 +1989,7 @@ void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
/* DMA end of transfer completion */
static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
{
- u32 status, epstatus;
+ u32 status;
struct lpc32xx_request *req;
struct lpc32xx_usbd_dd_gad *dd;
@@ -2085,7 +2083,7 @@ static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) {
udc_clearep_getsts(udc, ep->hwep_num);
uda_enable_hwepint(udc, ep->hwep_num);
- epstatus = udc_clearep_getsts(udc, ep->hwep_num);
+ udc_clearep_getsts(udc, ep->hwep_num);
/* Let the EP interrupt handle the ZLP */
return;
@@ -2197,7 +2195,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
struct lpc32xx_ep *ep, *ep0 = &udc->ep[0];
struct usb_ctrlrequest ctrlpkt;
int i, bytes;
- u16 wIndex, wValue, wLength, reqtype, req, tmp;
+ u16 wIndex, wValue, reqtype, req, tmp;
/* Nuke previous transfers */
nuke(ep0, -EPROTO);
@@ -2213,7 +2211,6 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
/* Native endianness */
wIndex = le16_to_cpu(ctrlpkt.wIndex);
wValue = le16_to_cpu(ctrlpkt.wValue);
- wLength = le16_to_cpu(ctrlpkt.wLength);
reqtype = le16_to_cpu(ctrlpkt.bRequestType);
/* Set direction of EP0 */
@@ -3060,11 +3057,8 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
/* Get IRQs */
for (i = 0; i < 4; i++) {
udc->udp_irq[i] = platform_get_irq(pdev, i);
- if (udc->udp_irq[i] < 0) {
- dev_err(udc->dev,
- "irq resource %d not available!\n", i);
+ if (udc->udp_irq[i] < 0)
return udc->udp_irq[i];
- }
}
udc->udp_baseaddr = devm_ioremap_resource(dev, res);
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index b6bbe2e448ba..51efee21915f 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -2244,30 +2244,40 @@ static void usb_reinit_338x(struct net2280 *dev)
}
/* Hardware Defect and Workaround */
- val = readl(&dev->ll_lfps_regs->ll_lfps_5);
+ val = readl(&dev->llregs->ll_lfps_5);
val &= ~(0xf << TIMER_LFPS_6US);
val |= 0x5 << TIMER_LFPS_6US;
- writel(val, &dev->ll_lfps_regs->ll_lfps_5);
+ writel(val, &dev->llregs->ll_lfps_5);
- val = readl(&dev->ll_lfps_regs->ll_lfps_6);
+ val = readl(&dev->llregs->ll_lfps_6);
val &= ~(0xffff << TIMER_LFPS_80US);
val |= 0x0100 << TIMER_LFPS_80US;
- writel(val, &dev->ll_lfps_regs->ll_lfps_6);
+ writel(val, &dev->llregs->ll_lfps_6);
/*
* AA_AB Errata. Issue 4. Workaround for SuperSpeed USB
* Hot Reset Exit Handshake may Fail in Specific Case using
* Default Register Settings. Workaround for Enumeration test.
*/
- val = readl(&dev->ll_tsn_regs->ll_tsn_counters_2);
+ val = readl(&dev->llregs->ll_tsn_counters_2);
val &= ~(0x1f << HOT_TX_NORESET_TS2);
val |= 0x10 << HOT_TX_NORESET_TS2;
- writel(val, &dev->ll_tsn_regs->ll_tsn_counters_2);
+ writel(val, &dev->llregs->ll_tsn_counters_2);
- val = readl(&dev->ll_tsn_regs->ll_tsn_counters_3);
+ val = readl(&dev->llregs->ll_tsn_counters_3);
val &= ~(0x1f << HOT_RX_RESET_TS2);
val |= 0x3 << HOT_RX_RESET_TS2;
- writel(val, &dev->ll_tsn_regs->ll_tsn_counters_3);
+ writel(val, &dev->llregs->ll_tsn_counters_3);
+
+ /*
+ * AB errata. Errata 11. Workaround for Default Duration of LFPS
+ * Handshake Signaling for Device-Initiated U1 Exit is too short.
+ * Without this, various enumeration failures observed with
+ * modern superspeed hosts.
+ */
+ val = readl(&dev->llregs->ll_lfps_timers_2);
+ writel((val & 0xffff0000) | LFPS_TIMERS_2_WORKAROUND_VALUE,
+ &dev->llregs->ll_lfps_timers_2);
/*
* Set Recovery Idle to Recover bit:
@@ -2276,10 +2286,10 @@ static void usb_reinit_338x(struct net2280 *dev)
* - It is safe to set for all connection speeds; all chip revisions.
* - R-M-W to leave other bits undisturbed.
* - Reference PLX TT-7372
- */
- val = readl(&dev->ll_chicken_reg->ll_tsn_chicken_bit);
+ */
+ val = readl(&dev->llregs->ll_tsn_chicken_bit);
val |= BIT(RECOVERY_IDLE_TO_RECOVER_FMW);
- writel(val, &dev->ll_chicken_reg->ll_tsn_chicken_bit);
+ writel(val, &dev->llregs->ll_tsn_chicken_bit);
INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
@@ -3669,12 +3679,6 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
(base + 0x00b4);
dev->llregs = (struct usb338x_ll_regs __iomem *)
(base + 0x0700);
- dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *)
- (base + 0x0748);
- dev->ll_tsn_regs = (struct usb338x_ll_tsn_regs __iomem *)
- (base + 0x077c);
- dev->ll_chicken_reg = (struct usb338x_ll_chi_regs __iomem *)
- (base + 0x079c);
dev->plregs = (struct usb338x_pl_regs __iomem *)
(base + 0x0800);
usbstat = readl(&dev->usb->usbstat);
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index b65a797544d7..85d3ca1698ba 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -178,9 +178,6 @@ struct net2280 {
struct net2280_dep_regs __iomem *dep;
struct net2280_ep_regs __iomem *epregs;
struct usb338x_ll_regs __iomem *llregs;
- struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs;
- struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs;
- struct usb338x_ll_chi_regs __iomem *ll_chicken_reg;
struct usb338x_pl_regs __iomem *plregs;
struct dma_pool *requests;
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index cded51f36fc1..265dab2bbfac 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -3046,8 +3046,7 @@ static void pch_udc_remove(struct pci_dev *pdev)
#ifdef CONFIG_PM_SLEEP
static int pch_udc_suspend(struct device *d)
{
- struct pci_dev *pdev = to_pci_dev(d);
- struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+ struct pch_udc_dev *dev = dev_get_drvdata(d);
pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 1f4c3fbd1df8..e098f16c01cb 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -2744,10 +2744,8 @@ static int renesas_usb3_probe(struct platform_device *pdev)
priv = of_device_get_match_data(&pdev->dev);
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+ if (irq < 0)
return irq;
- }
usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL);
if (!usb3)
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index 31c7c5587cf9..858993c73442 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -1311,10 +1311,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
s3c_hsudc_setup_ep(hsudc);
ret = platform_get_irq(pdev, 0);
- if (ret < 0) {
- dev_err(dev, "unable to obtain IRQ number\n");
+ if (ret < 0)
goto err_res;
- }
hsudc->irq = ret;
ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0,
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index af3e63316ace..f82208fbc249 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -312,6 +312,7 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep,
switch (idx) {
default:
idx = 0;
+ /* fall through */
case 0:
fifo_reg = S3C2410_UDC_EP0_FIFO_REG;
break;
@@ -416,6 +417,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep,
switch (idx) {
default:
idx = 0;
+ /* fall through */
case 0:
fifo_reg = S3C2410_UDC_EP0_FIFO_REG;
break;
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index b1f4104d1283..29d8e5f8bb58 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -2074,10 +2074,8 @@ static int xudc_probe(struct platform_device *pdev)
return PTR_ERR(udc->addr);
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "unable to get irq\n");
+ if (irq < 0)
return irq;
- }
ret = devm_request_irq(&pdev->dev, irq, xudc_irq, 0,
dev_name(&pdev->dev), udc);
if (ret < 0) {
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 73d233d3bf4d..79b2e79dddd0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -287,12 +287,6 @@ config USB_EHCI_MV
Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
on-chip EHCI USB controller" for those.
-config USB_W90X900_EHCI
- tristate "W90X900(W90P910) EHCI support"
- depends on ARCH_W90X900
- ---help---
- Enables support for the W90X900 USB controller
-
config USB_CNS3XXX_EHCI
bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
depends on ARCH_CNS3XXX
@@ -718,32 +712,6 @@ config USB_RENESAS_USBHS_HCD
To compile this driver as a module, choose M here: the
module will be called renesas-usbhs.
-config USB_WHCI_HCD
- tristate "Wireless USB Host Controller Interface (WHCI) driver"
- depends on USB_PCI && USB && UWB
- select USB_WUSB
- select UWB_WHCI
- help
- A driver for PCI-based Wireless USB Host Controllers that are
- compliant with the WHCI specification.
-
- To compile this driver a module, choose M here: the module
- will be called "whci-hcd".
-
-config USB_HWA_HCD
- tristate "Host Wire Adapter (HWA) driver"
- depends on USB && UWB
- select USB_WUSB
- select UWB_HWA
- help
- This driver enables you to connect Wireless USB devices to
- your system using a Host Wire Adaptor USB dongle. This is an
- UWB Radio Controller and WUSB Host Controller connected to
- your machine via USB (specified in WUSB1.0).
-
- To compile this driver a module, choose M here: the module
- will be called "hwa-hc".
-
config USB_IMX21_HCD
tristate "i.MX21 HCD support"
depends on ARM && ARCH_MXC
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 84514f71ae44..b191361257cc 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -35,8 +35,6 @@ ifneq ($(CONFIG_DEBUG_FS),)
xhci-hcd-y += xhci-debugfs.o
endif
-obj-$(CONFIG_USB_WHCI_HCD) += whci/
-
obj-$(CONFIG_USB_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
@@ -51,7 +49,6 @@ obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o
obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
-obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
@@ -82,7 +79,6 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o
obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 3ba140ceaf52..e893467d659c 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -100,9 +100,6 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
- dev_err(&pdev->dev,
- "Found HC with no IRQ. Check %s setup!\n",
- dev_name(&pdev->dev));
retval = -ENODEV;
goto fail_create_hcd;
}
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 3a29a1a8519c..01debfd03d4a 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -41,6 +41,7 @@ struct exynos_ehci_hcd {
struct clk *clk;
struct device_node *of_node;
struct phy *phy[PHY_NUMBER];
+ bool legacy_phy;
};
#define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
@@ -50,10 +51,22 @@ static int exynos_ehci_get_phy(struct device *dev,
{
struct device_node *child;
struct phy *phy;
- int phy_number;
+ int phy_number, num_phys;
int ret;
/* Get PHYs for the controller */
+ num_phys = of_count_phandle_with_args(dev->of_node, "phys",
+ "#phy-cells");
+ for (phy_number = 0; phy_number < num_phys; phy_number++) {
+ phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+ exynos_ehci->phy[phy_number] = phy;
+ }
+ if (num_phys > 0)
+ return 0;
+
+ /* Get PHYs using legacy bindings */
for_each_available_child_of_node(dev->of_node, child) {
ret = of_property_read_u32(child, "reg", &phy_number);
if (ret) {
@@ -84,6 +97,7 @@ static int exynos_ehci_get_phy(struct device *dev,
}
}
+ exynos_ehci->legacy_phy = true;
return 0;
}
@@ -205,11 +219,12 @@ static int exynos_ehci_probe(struct platform_device *pdev)
ehci->caps = hcd->regs;
/*
- * Workaround: reset of_node pointer to avoid conflict between Exynos
- * EHCI port subnodes and generic USB device bindings
+ * Workaround: reset of_node pointer to avoid conflict between legacy
+ * Exynos EHCI port subnodes and generic USB device bindings
*/
exynos_ehci->of_node = pdev->dev.of_node;
- pdev->dev.of_node = NULL;
+ if (exynos_ehci->legacy_phy)
+ pdev->dev.of_node = NULL;
/* DMA burst Enable */
writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index 656b8c08efc8..a2c3b4ec8a8b 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -30,7 +30,7 @@ static const struct hc_driver ehci_grlib_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9da7e22848c9..cf2b7ae93b7e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1193,7 +1193,7 @@ static const struct hc_driver ehci_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 7d20296cbe9f..fc125b3d06e7 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -115,10 +115,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "EHCI irq failed: %d\n", irq);
+ if (irq < 0)
return irq;
- }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(dev, res);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 790acf3633e8..a319b1df3011 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -223,9 +223,6 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
- dev_err(&pdev->dev,
- "Found HC with no IRQ. Check %s setup!\n",
- dev_name(&pdev->dev));
err = -ENODEV;
goto err;
}
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 4c306fb6b069..769749ca5961 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -145,10 +145,8 @@ static int ehci_platform_probe(struct platform_device *dev)
}
irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- dev_err(&dev->dev, "no irq provided");
+ if (irq < 0)
return irq;
- }
hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
dev_name(&dev->dev));
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 46e160370d6e..a2b610dbedfc 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -250,7 +250,7 @@ static const struct hc_driver ehci_msp_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 576f7d79ad4e..6bbaee74f7e7 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -31,7 +31,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 454d8c624a3f..fb52133c3557 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -59,7 +59,7 @@ static const struct hc_driver ps3_ehci_hc_driver = {
.product_desc = "PS3 EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
.reset = ps3_ehci_hc_reset,
.start = ehci_run,
.stop = ehci_stop,
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index a9ee767952c1..2afde14dc425 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -33,7 +33,7 @@ static const struct hc_driver ehci_sh_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
+ .flags = HCD_USB2 | HCD_DMA | HCD_MEMORY | HCD_BH,
/*
* basic lifecycle operations
@@ -85,9 +85,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
- dev_err(&pdev->dev,
- "Found HC with no IRQ. Check %s setup!\n",
- dev_name(&pdev->dev));
ret = -ENODEV;
goto fail_create_hcd;
}
diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c
index ccb4e611001d..f74433aac948 100644
--- a/drivers/usb/host/ehci-st.c
+++ b/drivers/usb/host/ehci-st.c
@@ -158,10 +158,8 @@ static int st_ehci_platform_probe(struct platform_device *dev)
return -ENODEV;
irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- dev_err(&dev->dev, "no irq provided");
+ if (irq < 0)
return irq;
- }
res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res_mem) {
dev_err(&dev->dev, "no memory resource provided");
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
deleted file mode 100644
index 6d77ace1697b..000000000000
--- a/drivers/usb/host/ehci-w90x900.c
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/driver/usb/host/ehci-w90x900.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-
-#include "ehci.h"
-
-/* enable phy0 and phy1 for w90p910 */
-#define ENPHY (0x01<<8)
-#define PHY0_CTR (0xA4)
-#define PHY1_CTR (0xA8)
-
-#define DRIVER_DESC "EHCI w90x900 driver"
-
-static const char hcd_name[] = "ehci-w90x900 ";
-
-static struct hc_driver __read_mostly ehci_w90x900_hc_driver;
-
-static int ehci_w90x900_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct ehci_hcd *ehci;
- struct resource *res;
- int retval = 0, irq;
- unsigned long val;
-
- hcd = usb_create_hcd(&ehci_w90x900_hc_driver,
- &pdev->dev, "w90x900 EHCI");
- if (!hcd) {
- retval = -ENOMEM;
- goto err1;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- retval = PTR_ERR(hcd->regs);
- goto err2;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- ehci = hcd_to_ehci(hcd);
- ehci->caps = hcd->regs;
- ehci->regs = hcd->regs +
- HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-
- /* enable PHY 0,1,the regs only apply to w90p910
- * 0xA4,0xA8 were offsets of PHY0 and PHY1 controller of
- * w90p910 IC relative to ehci->regs.
- */
- val = __raw_readl(ehci->regs+PHY0_CTR);
- val |= ENPHY;
- __raw_writel(val, ehci->regs+PHY0_CTR);
-
- val = __raw_readl(ehci->regs+PHY1_CTR);
- val |= ENPHY;
- __raw_writel(val, ehci->regs+PHY1_CTR);
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- retval = irq;
- goto err2;
- }
-
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval != 0)
- goto err2;
-
- device_wakeup_enable(hcd->self.controller);
- return retval;
-err2:
- usb_put_hcd(hcd);
-err1:
- return retval;
-}
-
-static int ehci_w90x900_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-static struct platform_driver ehci_hcd_w90x900_driver = {
- .probe = ehci_w90x900_probe,
- .remove = ehci_w90x900_remove,
- .driver = {
- .name = "w90x900-ehci",
- },
-};
-
-static int __init ehci_w90X900_init(void)
-{
- if (usb_disabled())
- return -ENODEV;
-
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
- ehci_init_driver(&ehci_w90x900_hc_driver, NULL);
- return platform_driver_register(&ehci_hcd_w90x900_driver);
-}
-module_init(ehci_w90X900_init);
-
-static void __exit ehci_w90X900_cleanup(void)
-{
- platform_driver_unregister(&ehci_hcd_w90x900_driver);
-}
-module_exit(ehci_w90X900_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
-MODULE_ALIAS("platform:w90p910-ehci");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index d2a27578e440..67a6ee8cb5d8 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -66,7 +66,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = {
* generic hardware linkage
*/
.irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 48fe9e6c2465..04733876c9c6 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -538,7 +538,7 @@ static const struct hc_driver fhci_driver = {
/* generic hardware linkage */
.irq = fhci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
+ .flags = HCD_DMA | HCD_USB11 | HCD_MEMORY,
/* basic lifecycle operation */
.start = fhci_start,
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 0dbfa5c10703..9e0c98d6bdb0 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -5508,7 +5508,7 @@ static const struct hc_driver fotg210_fotg210_hc_driver = {
* generic hardware linkage
*/
.irq = fotg210_irq,
- .flags = HCD_MEMORY | HCD_USB2,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB2,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 6e3dad19d369..5835f9966204 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1771,7 +1771,7 @@ static const struct hc_driver imx21_hc_driver = {
.product_desc = "IMX21 USB Host Controller",
.hcd_priv_size = sizeof(struct imx21),
- .flags = HCD_USB11,
+ .flags = HCD_DMA | HCD_USB11,
.irq = imx21_irq,
.reset = imx21_hc_reset,
@@ -1836,10 +1836,8 @@ static int imx21_probe(struct platform_device *pdev)
if (!res)
return -ENODEV;
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+ if (irq < 0)
return irq;
- }
hcd = usb_create_hcd(&imx21_hc_driver,
&pdev->dev, dev_name(&pdev->dev));
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 74da136d322a..a87c0b26279e 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1581,12 +1581,6 @@ static int isp116x_probe(struct platform_device *pdev)
irq = ires->start;
irqflags = ires->flags & IRQF_TRIGGER_MASK;
- if (pdev->dev.dma_mask) {
- DBG("DMA not supported\n");
- ret = -EINVAL;
- goto err1;
- }
-
if (!request_mem_region(addr->start, 2, hcd_name)) {
ret = -EBUSY;
goto err1;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 28bf8bfb091e..96f8daa11f25 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2645,11 +2645,6 @@ static int isp1362_probe(struct platform_device *pdev)
if (pdev->num_resources < 3)
return -ENODEV;
- if (pdev->dev.dma_mask) {
- DBG(1, "won't do DMA");
- return -ENODEV;
- }
-
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res)
return -ENODEV;
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index afa321ab55fc..8819f502b6a6 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -1800,21 +1800,6 @@ max3421_bus_resume(struct usb_hcd *hcd)
return -1;
}
-/*
- * The SPI driver already takes care of DMA-mapping/unmapping, so no
- * reason to do it twice.
- */
-static int
-max3421_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
-{
- return 0;
-}
-
-static void
-max3421_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
-{
-}
-
static const struct hc_driver max3421_hcd_desc = {
.description = "max3421",
.product_desc = DRIVER_DESC,
@@ -1826,8 +1811,6 @@ static const struct hc_driver max3421_hcd_desc = {
.get_frame_number = max3421_get_frame_number,
.urb_enqueue = max3421_urb_enqueue,
.urb_dequeue = max3421_urb_dequeue,
- .map_urb_for_dma = max3421_map_urb_for_dma,
- .unmap_urb_for_dma = max3421_unmap_urb_for_dma,
.endpoint_disable = max3421_endpoint_disable,
.hub_status_data = max3421_hub_status_data,
.hub_control = max3421_hub_control,
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 905c6317e0c3..d5ce98e205c7 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -32,6 +32,7 @@ struct exynos_ohci_hcd {
struct clk *clk;
struct device_node *of_node;
struct phy *phy[PHY_NUMBER];
+ bool legacy_phy;
};
static int exynos_ohci_get_phy(struct device *dev,
@@ -39,10 +40,22 @@ static int exynos_ohci_get_phy(struct device *dev,
{
struct device_node *child;
struct phy *phy;
- int phy_number;
+ int phy_number, num_phys;
int ret;
/* Get PHYs for the controller */
+ num_phys = of_count_phandle_with_args(dev->of_node, "phys",
+ "#phy-cells");
+ for (phy_number = 0; phy_number < num_phys; phy_number++) {
+ phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+ exynos_ohci->phy[phy_number] = phy;
+ }
+ if (num_phys > 0)
+ return 0;
+
+ /* Get PHYs using legacy bindings */
for_each_available_child_of_node(dev->of_node, child) {
ret = of_property_read_u32(child, "reg", &phy_number);
if (ret) {
@@ -73,6 +86,7 @@ static int exynos_ohci_get_phy(struct device *dev,
}
}
+ exynos_ohci->legacy_phy = true;
return 0;
}
@@ -172,11 +186,12 @@ static int exynos_ohci_probe(struct platform_device *pdev)
}
/*
- * Workaround: reset of_node pointer to avoid conflict between Exynos
- * OHCI port subnodes and generic USB device bindings
+ * Workaround: reset of_node pointer to avoid conflict between legacy
+ * Exynos OHCI port subnodes and generic USB device bindings
*/
exynos_ohci->of_node = pdev->dev.of_node;
- pdev->dev.of_node = NULL;
+ if (exynos_ohci->legacy_phy)
+ pdev->dev.of_node = NULL;
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err) {
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 1fe3deec35cf..4de91653a2c7 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1187,7 +1187,7 @@ static const struct hc_driver ohci_hc_driver = {
* generic hardware linkage
*/
.irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB11,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 65a1c3fdc88c..7addfc2cbadc 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -111,10 +111,8 @@ static int ohci_platform_probe(struct platform_device *dev)
return err;
irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- dev_err(&dev->dev, "no irq provided");
+ if (irq < 0)
return irq;
- }
hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
dev_name(&dev->dev));
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 76a9b40b08f1..45f7cceb6df3 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -50,7 +50,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = {
* generic hardware linkage
*/
.irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
+ .flags = HCD_USB11 | HCD_DMA | HCD_MEMORY,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 395f9d3bc849..f77cd6af0ccf 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -46,7 +46,7 @@ static const struct hc_driver ps3_ohci_hc_driver = {
.product_desc = "PS3 OHCI Host Controller",
.hcd_priv_size = sizeof(struct ohci_hcd),
.irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB11,
.reset = ps3_ohci_hc_reset,
.start = ps3_ohci_hc_start,
.stop = ohci_stop,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 3e2474959735..7679fb583e41 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -148,7 +148,7 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode)
uhcrhda |= RH_A_NPS;
break;
case PMM_GLOBAL_MODE:
- uhcrhda &= ~(RH_A_NPS & RH_A_PSM);
+ uhcrhda &= ~(RH_A_NPS | RH_A_PSM);
break;
case PMM_PERPORT_MODE:
uhcrhda &= ~(RH_A_NPS);
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index ebec9a7699e3..8e19a5eb5b62 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -84,7 +84,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
* generic hardware linkage
*/
.irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
+ .flags = HCD_USB11 | HCD_DMA | HCD_MEMORY,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c
index 638a92bd2cdc..ac796ccd93ef 100644
--- a/drivers/usb/host/ohci-st.c
+++ b/drivers/usb/host/ohci-st.c
@@ -138,10 +138,8 @@ static int st_ohci_platform_probe(struct platform_device *dev)
return -ENODEV;
irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- dev_err(&dev->dev, "no irq provided");
+ if (irq < 0)
return irq;
- }
res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res_mem) {
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index d5a293a707b6..fb6f5e9ae5c6 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -97,10 +97,13 @@ static void tmio_stop_hc(struct platform_device *dev)
switch (ohci->num_ports) {
default:
dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports);
+ /* fall through */
case 3:
pm |= CCR_PM_USBPW3;
+ /* fall through */
case 2:
pm |= CCR_PM_USBPW2;
+ /* fall through */
case 1:
pm |= CCR_PM_USBPW1;
}
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 47c5515a9ce4..e67242e437ed 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -31,10 +31,449 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
-#include "oxu210hp.h"
-
#define DRIVER_VERSION "0.0.50"
+#define OXU_DEVICEID 0x00
+ #define OXU_REV_MASK 0xffff0000
+ #define OXU_REV_SHIFT 16
+ #define OXU_REV_2100 0x2100
+ #define OXU_BO_SHIFT 8
+ #define OXU_BO_MASK (0x3 << OXU_BO_SHIFT)
+ #define OXU_MAJ_REV_SHIFT 4
+ #define OXU_MAJ_REV_MASK (0xf << OXU_MAJ_REV_SHIFT)
+ #define OXU_MIN_REV_SHIFT 0
+ #define OXU_MIN_REV_MASK (0xf << OXU_MIN_REV_SHIFT)
+#define OXU_HOSTIFCONFIG 0x04
+#define OXU_SOFTRESET 0x08
+ #define OXU_SRESET (1 << 0)
+
+#define OXU_PIOBURSTREADCTRL 0x0C
+
+#define OXU_CHIPIRQSTATUS 0x10
+#define OXU_CHIPIRQEN_SET 0x14
+#define OXU_CHIPIRQEN_CLR 0x18
+ #define OXU_USBSPHLPWUI 0x00000080
+ #define OXU_USBOTGLPWUI 0x00000040
+ #define OXU_USBSPHI 0x00000002
+ #define OXU_USBOTGI 0x00000001
+
+#define OXU_CLKCTRL_SET 0x1C
+ #define OXU_SYSCLKEN 0x00000008
+ #define OXU_USBSPHCLKEN 0x00000002
+ #define OXU_USBOTGCLKEN 0x00000001
+
+#define OXU_ASO 0x68
+ #define OXU_SPHPOEN 0x00000100
+ #define OXU_OVRCCURPUPDEN 0x00000800
+ #define OXU_ASO_OP (1 << 10)
+ #define OXU_COMPARATOR 0x000004000
+
+#define OXU_USBMODE 0x1A8
+ #define OXU_VBPS 0x00000020
+ #define OXU_ES_LITTLE 0x00000000
+ #define OXU_CM_HOST_ONLY 0x00000003
+
+/*
+ * Proper EHCI structs & defines
+ */
+
+/* Magic numbers that can affect system performance */
+#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
+#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
+#define EHCI_TUNE_RL_TT 0
+#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
+#define EHCI_TUNE_MULT_TT 1
+#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
+
+struct oxu_hcd;
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+ /* these fields are specified as 8 and 16 bit registers,
+ * but some hosts can't perform 8 or 16 bit PCI accesses.
+ */
+ u32 hc_capbase;
+#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
+#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+
+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
+ u8 portroute[8]; /* nibbles for routing - offset 0xC */
+} __packed;
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+ /* USBCMD: offset 0x00 */
+ u32 command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK (1<<11) /* enable "park" on async qh */
+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
+#define CMD_ASE (1<<5) /* async schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+
+ /* USBSTS: offset 0x04 */
+ u32 status;
+#define STS_ASS (1<<15) /* Async Schedule Status */
+#define STS_PSS (1<<14) /* Periodic Schedule Status */
+#define STS_RECL (1<<13) /* Reclamation */
+#define STS_HALT (1<<12) /* Not running (any reason) */
+/* some bits reserved */
+ /* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA (1<<5) /* Interrupted on async advance */
+#define STS_FATAL (1<<4) /* such as some PCI access errors */
+#define STS_FLR (1<<3) /* frame list rolled over */
+#define STS_PCD (1<<2) /* port change detect */
+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
+
+#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+
+ /* USBINTR: offset 0x08 */
+ u32 intr_enable;
+
+ /* FRINDEX: offset 0x0C */
+ u32 frame_index; /* current microframe number */
+ /* CTRLDSSEGMENT: offset 0x10 */
+ u32 segment; /* address bits 63:32 if needed */
+ /* PERIODICLISTBASE: offset 0x14 */
+ u32 frame_list; /* points to periodic list */
+ /* ASYNCLISTADDR: offset 0x18 */
+ u32 async_next; /* address of next async queue head */
+
+ u32 reserved[9];
+
+ /* CONFIGFLAG: offset 0x40 */
+ u32 configured_flag;
+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+
+ /* PORTSC: offset 0x44 */
+ u32 port_status[0]; /* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
+#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
+#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF (0<<14)
+#define PORT_LED_AMBER (1<<14)
+#define PORT_LED_GREEN (2<<14)
+#define PORT_LED_MASK (3<<14)
+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_OCC (1<<5) /* over current change */
+#define PORT_OC (1<<4) /* over current active */
+#define PORT_PEC (1<<3) /* port enable change */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+} __packed;
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console. (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+} __packed;
+
+#define QTD_NEXT(dma) cpu_to_le32((u32)dma)
+
+/*
+ * EHCI Specification 0.95 Section 3.5
+ * QTD: describe data transfer components (buffer, direction, ...)
+ * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
+ *
+ * These are associated only with "QH" (Queue Head) structures,
+ * used with control, bulk, and interrupt transfers.
+ */
+struct ehci_qtd {
+ /* first part defined by EHCI spec */
+ __le32 hw_next; /* see EHCI 3.5.1 */
+ __le32 hw_alt_next; /* see EHCI 3.5.2 */
+ __le32 hw_token; /* see EHCI 3.5.3 */
+#define QTD_TOGGLE (1 << 31) /* data toggle */
+#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
+#define QTD_IOC (1 << 15) /* interrupt on complete */
+#define QTD_CERR(tok) (((tok)>>10) & 0x3)
+#define QTD_PID(tok) (((tok)>>8) & 0x3)
+#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
+#define QTD_STS_HALT (1 << 6) /* halted on error */
+#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
+#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
+#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
+#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
+#define QTD_STS_STS (1 << 1) /* split transaction state */
+#define QTD_STS_PING (1 << 0) /* issue PING? */
+ __le32 hw_buf[5]; /* see EHCI 3.5.4 */
+ __le32 hw_buf_hi[5]; /* Appendix B */
+
+ /* the rest is HCD-private */
+ dma_addr_t qtd_dma; /* qtd address */
+ struct list_head qtd_list; /* sw qtd list */
+ struct urb *urb; /* qtd's urb */
+ size_t length; /* length of buffer */
+
+ u32 qtd_buffer_len;
+ void *buffer;
+ dma_addr_t buffer_dma;
+ void *transfer_buffer;
+ void *transfer_dma;
+} __aligned(32);
+
+/* mask NakCnt+T in qh->hw_alt_next */
+#define QTD_MASK cpu_to_le32 (~0x1f)
+
+#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
+
+/* Type tag from {qh, itd, sitd, fstn}->hw_next */
+#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1))
+
+/* values for that type tag */
+#define Q_TYPE_QH cpu_to_le32 (1 << 1)
+
+/* next async queue entry, or pointer to interrupt/periodic QH */
+#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
+
+/* for periodic/async schedules and qtd lists, mark end of list */
+#define EHCI_LIST_END cpu_to_le32(1) /* "null pointer" to hw */
+
+/*
+ * Entries in periodic shadow table are pointers to one of four kinds
+ * of data structure. That's dictated by the hardware; a type tag is
+ * encoded in the low bits of the hardware's periodic schedule. Use
+ * Q_NEXT_TYPE to get the tag.
+ *
+ * For entries in the async schedule, the type tag always says "qh".
+ */
+union ehci_shadow {
+ struct ehci_qh *qh; /* Q_TYPE_QH */
+ __le32 *hw_next; /* (all types) */
+ void *ptr;
+};
+
+/*
+ * EHCI Specification 0.95 Section 3.6
+ * QH: describes control/bulk/interrupt endpoints
+ * See Fig 3-7 "Queue Head Structure Layout".
+ *
+ * These appear in both the async and (for interrupt) periodic schedules.
+ */
+
+struct ehci_qh {
+ /* first part defined by EHCI spec */
+ __le32 hw_next; /* see EHCI 3.6.1 */
+ __le32 hw_info1; /* see EHCI 3.6.2 */
+#define QH_HEAD 0x00008000
+ __le32 hw_info2; /* see EHCI 3.6.2 */
+#define QH_SMASK 0x000000ff
+#define QH_CMASK 0x0000ff00
+#define QH_HUBADDR 0x007f0000
+#define QH_HUBPORT 0x3f800000
+#define QH_MULT 0xc0000000
+ __le32 hw_current; /* qtd list - see EHCI 3.6.4 */
+
+ /* qtd overlay (hardware parts of a struct ehci_qtd) */
+ __le32 hw_qtd_next;
+ __le32 hw_alt_next;
+ __le32 hw_token;
+ __le32 hw_buf[5];
+ __le32 hw_buf_hi[5];
+
+ /* the rest is HCD-private */
+ dma_addr_t qh_dma; /* address of qh */
+ union ehci_shadow qh_next; /* ptr to qh; or periodic */
+ struct list_head qtd_list; /* sw qtd list */
+ struct ehci_qtd *dummy;
+ struct ehci_qh *reclaim; /* next to reclaim */
+
+ struct oxu_hcd *oxu;
+ struct kref kref;
+ unsigned int stamp;
+
+ u8 qh_state;
+#define QH_STATE_LINKED 1 /* HC sees this */
+#define QH_STATE_UNLINK 2 /* HC may still see this */
+#define QH_STATE_IDLE 3 /* HC doesn't see this */
+#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */
+#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
+
+ /* periodic schedule info */
+ u8 usecs; /* intr bandwidth */
+ u8 gap_uf; /* uframes split/csplit gap */
+ u8 c_usecs; /* ... split completion bw */
+ u16 tt_usecs; /* tt downstream bandwidth */
+ unsigned short period; /* polling interval */
+ unsigned short start; /* where polling starts */
+#define NO_FRAME ((unsigned short)~0) /* pick new start */
+ struct usb_device *dev; /* access to TT */
+} __aligned(32);
+
+/*
+ * Proper OXU210HP structs
+ */
+
+#define OXU_OTG_CORE_OFFSET 0x00400
+#define OXU_OTG_CAP_OFFSET (OXU_OTG_CORE_OFFSET + 0x100)
+#define OXU_SPH_CORE_OFFSET 0x00800
+#define OXU_SPH_CAP_OFFSET (OXU_SPH_CORE_OFFSET + 0x100)
+
+#define OXU_OTG_MEM 0xE000
+#define OXU_SPH_MEM 0x16000
+
+/* Only how many elements & element structure are specifies here. */
+/* 2 host controllers are enabled - total size <= 28 kbytes */
+#define DEFAULT_I_TDPS 1024
+#define QHEAD_NUM 16
+#define QTD_NUM 32
+#define SITD_NUM 8
+#define MURB_NUM 8
+
+#define BUFFER_NUM 8
+#define BUFFER_SIZE 512
+
+struct oxu_info {
+ struct usb_hcd *hcd[2];
+};
+
+struct oxu_buf {
+ u8 buffer[BUFFER_SIZE];
+} __aligned(BUFFER_SIZE);
+
+struct oxu_onchip_mem {
+ struct oxu_buf db_pool[BUFFER_NUM];
+
+ u32 frame_list[DEFAULT_I_TDPS];
+ struct ehci_qh qh_pool[QHEAD_NUM];
+ struct ehci_qtd qtd_pool[QTD_NUM];
+} __aligned(4 << 10);
+
+#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */
+
+struct oxu_murb {
+ struct urb urb;
+ struct urb *main;
+ u8 last;
+};
+
+struct oxu_hcd { /* one per controller */
+ unsigned int is_otg:1;
+
+ u8 qh_used[QHEAD_NUM];
+ u8 qtd_used[QTD_NUM];
+ u8 db_used[BUFFER_NUM];
+ u8 murb_used[MURB_NUM];
+
+ struct oxu_onchip_mem __iomem *mem;
+ spinlock_t mem_lock;
+
+ struct timer_list urb_timer;
+
+ struct ehci_caps __iomem *caps;
+ struct ehci_regs __iomem *regs;
+
+ u32 hcs_params; /* cached register copy */
+ spinlock_t lock;
+
+ /* async schedule support */
+ struct ehci_qh *async;
+ struct ehci_qh *reclaim;
+ unsigned int reclaim_ready:1;
+ unsigned int scanning:1;
+
+ /* periodic schedule support */
+ unsigned int periodic_size;
+ __le32 *periodic; /* hw periodic table */
+ dma_addr_t periodic_dma;
+ unsigned int i_thresh; /* uframes HC might cache */
+
+ union ehci_shadow *pshadow; /* mirror hw periodic table */
+ int next_uframe; /* scan periodic, start here */
+ unsigned int periodic_sched; /* periodic activity count */
+
+ /* per root hub port */
+ unsigned long reset_done[EHCI_MAX_ROOT_PORTS];
+ /* bit vectors (one bit per port) */
+ unsigned long bus_suspended; /* which ports were
+ * already suspended at the
+ * start of a bus suspend
+ */
+ unsigned long companion_ports;/* which ports are dedicated
+ * to the companion controller
+ */
+
+ struct timer_list watchdog;
+ unsigned long actions;
+ unsigned int stamp;
+ unsigned long next_statechange;
+ u32 command;
+
+ /* SILICON QUIRKS */
+ struct list_head urb_list; /* this is the head to urb
+ * queue that didn't get enough
+ * resources
+ */
+ struct oxu_murb *murb_pool; /* murb per split big urb */
+ unsigned int urb_len;
+
+ u8 sbrn; /* packed release number */
+};
+
+#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */
+#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
+#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */
+#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */
+
+enum ehci_timer_action {
+ TIMER_IO_WATCHDOG,
+ TIMER_IAA_WATCHDOG,
+ TIMER_ASYNC_SHRINK,
+ TIMER_ASYNC_OFF,
+};
+
/*
* Main defines
*/
@@ -2649,9 +3088,6 @@ static int oxu_reset(struct usb_hcd *hcd)
INIT_LIST_HEAD(&oxu->urb_list);
oxu->urb_len = 0;
- /* FIMXE */
- hcd->self.controller->dma_mask = NULL;
-
if (oxu->is_otg) {
oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET;
oxu->regs = hcd->regs + OXU_OTG_CAP_OFFSET + \
diff --git a/drivers/usb/host/oxu210hp.h b/drivers/usb/host/oxu210hp.h
deleted file mode 100644
index 437044147862..000000000000
--- a/drivers/usb/host/oxu210hp.h
+++ /dev/null
@@ -1,448 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Host interface registers
- */
-
-#define OXU_DEVICEID 0x00
- #define OXU_REV_MASK 0xffff0000
- #define OXU_REV_SHIFT 16
- #define OXU_REV_2100 0x2100
- #define OXU_BO_SHIFT 8
- #define OXU_BO_MASK (0x3 << OXU_BO_SHIFT)
- #define OXU_MAJ_REV_SHIFT 4
- #define OXU_MAJ_REV_MASK (0xf << OXU_MAJ_REV_SHIFT)
- #define OXU_MIN_REV_SHIFT 0
- #define OXU_MIN_REV_MASK (0xf << OXU_MIN_REV_SHIFT)
-#define OXU_HOSTIFCONFIG 0x04
-#define OXU_SOFTRESET 0x08
- #define OXU_SRESET (1 << 0)
-
-#define OXU_PIOBURSTREADCTRL 0x0C
-
-#define OXU_CHIPIRQSTATUS 0x10
-#define OXU_CHIPIRQEN_SET 0x14
-#define OXU_CHIPIRQEN_CLR 0x18
- #define OXU_USBSPHLPWUI 0x00000080
- #define OXU_USBOTGLPWUI 0x00000040
- #define OXU_USBSPHI 0x00000002
- #define OXU_USBOTGI 0x00000001
-
-#define OXU_CLKCTRL_SET 0x1C
- #define OXU_SYSCLKEN 0x00000008
- #define OXU_USBSPHCLKEN 0x00000002
- #define OXU_USBOTGCLKEN 0x00000001
-
-#define OXU_ASO 0x68
- #define OXU_SPHPOEN 0x00000100
- #define OXU_OVRCCURPUPDEN 0x00000800
- #define OXU_ASO_OP (1 << 10)
- #define OXU_COMPARATOR 0x000004000
-
-#define OXU_USBMODE 0x1A8
- #define OXU_VBPS 0x00000020
- #define OXU_ES_LITTLE 0x00000000
- #define OXU_CM_HOST_ONLY 0x00000003
-
-/*
- * Proper EHCI structs & defines
- */
-
-/* Magic numbers that can affect system performance */
-#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
-#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
-#define EHCI_TUNE_RL_TT 0
-#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
-#define EHCI_TUNE_MULT_TT 1
-#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
-
-struct oxu_hcd;
-
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
- /* these fields are specified as 8 and 16 bit registers,
- * but some hosts can't perform 8 or 16 bit PCI accesses.
- */
- u32 hc_capbase;
-#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
-#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
- u32 hcs_params; /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
-#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
-#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
-#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
-#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
-
- u32 hcc_params; /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
-#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
- u8 portroute[8]; /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
- /* USBCMD: offset 0x00 */
- u32 command;
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK (1<<11) /* enable "park" on async qh */
-#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
-#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
-#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
-#define CMD_ASE (1<<5) /* async schedule enable */
-#define CMD_PSE (1<<4) /* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET (1<<1) /* reset HC not bus */
-#define CMD_RUN (1<<0) /* start/stop HC */
-
- /* USBSTS: offset 0x04 */
- u32 status;
-#define STS_ASS (1<<15) /* Async Schedule Status */
-#define STS_PSS (1<<14) /* Periodic Schedule Status */
-#define STS_RECL (1<<13) /* Reclamation */
-#define STS_HALT (1<<12) /* Not running (any reason) */
-/* some bits reserved */
- /* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA (1<<5) /* Interrupted on async advance */
-#define STS_FATAL (1<<4) /* such as some PCI access errors */
-#define STS_FLR (1<<3) /* frame list rolled over */
-#define STS_PCD (1<<2) /* port change detect */
-#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
-#define STS_INT (1<<0) /* "normal" completion (short, ...) */
-
-#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
-
- /* USBINTR: offset 0x08 */
- u32 intr_enable;
-
- /* FRINDEX: offset 0x0C */
- u32 frame_index; /* current microframe number */
- /* CTRLDSSEGMENT: offset 0x10 */
- u32 segment; /* address bits 63:32 if needed */
- /* PERIODICLISTBASE: offset 0x14 */
- u32 frame_list; /* points to periodic list */
- /* ASYNCLISTADDR: offset 0x18 */
- u32 async_next; /* address of next async queue head */
-
- u32 reserved[9];
-
- /* CONFIGFLAG: offset 0x40 */
- u32 configured_flag;
-#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
-
- /* PORTSC: offset 0x44 */
- u32 port_status[0]; /* up to N_PORTS */
-/* 31:23 reserved */
-#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
-#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
-#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_LED_OFF (0<<14)
-#define PORT_LED_AMBER (1<<14)
-#define PORT_LED_GREEN (2<<14)
-#define PORT_LED_MASK (3<<14)
-#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
-#define PORT_POWER (1<<12) /* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_RESET (1<<8) /* reset port */
-#define PORT_SUSPEND (1<<7) /* suspend port */
-#define PORT_RESUME (1<<6) /* resume it */
-#define PORT_OCC (1<<5) /* over current change */
-#define PORT_OC (1<<4) /* over current active */
-#define PORT_PEC (1<<3) /* port enable change */
-#define PORT_PE (1<<2) /* port enable */
-#define PORT_CSC (1<<1) /* connect status change */
-#define PORT_CONNECT (1<<0) /* device connected */
-#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console. (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
- u32 control;
-#define DBGP_OWNER (1<<30)
-#define DBGP_ENABLED (1<<28)
-#define DBGP_DONE (1<<16)
-#define DBGP_INUSE (1<<10)
-#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
-# define DBGP_ERR_BAD 1
-# define DBGP_ERR_SIGNAL 2
-#define DBGP_ERROR (1<<6)
-#define DBGP_GO (1<<5)
-#define DBGP_OUT (1<<4)
-#define DBGP_LEN(x) (((x)>>0)&0x0f)
- u32 pids;
-#define DBGP_PID_GET(x) (((x)>>16)&0xff)
-#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
- u32 data03;
- u32 data47;
- u32 address;
-#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
-} __attribute__ ((packed));
-
-
-#define QTD_NEXT(dma) cpu_to_le32((u32)dma)
-
-/*
- * EHCI Specification 0.95 Section 3.5
- * QTD: describe data transfer components (buffer, direction, ...)
- * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
- *
- * These are associated only with "QH" (Queue Head) structures,
- * used with control, bulk, and interrupt transfers.
- */
-struct ehci_qtd {
- /* first part defined by EHCI spec */
- __le32 hw_next; /* see EHCI 3.5.1 */
- __le32 hw_alt_next; /* see EHCI 3.5.2 */
- __le32 hw_token; /* see EHCI 3.5.3 */
-#define QTD_TOGGLE (1 << 31) /* data toggle */
-#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
-#define QTD_IOC (1 << 15) /* interrupt on complete */
-#define QTD_CERR(tok) (((tok)>>10) & 0x3)
-#define QTD_PID(tok) (((tok)>>8) & 0x3)
-#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
-#define QTD_STS_HALT (1 << 6) /* halted on error */
-#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
-#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
-#define QTD_STS_XACT (1 << 3) /* device gave illegal response */
-#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
-#define QTD_STS_STS (1 << 1) /* split transaction state */
-#define QTD_STS_PING (1 << 0) /* issue PING? */
- __le32 hw_buf[5]; /* see EHCI 3.5.4 */
- __le32 hw_buf_hi[5]; /* Appendix B */
-
- /* the rest is HCD-private */
- dma_addr_t qtd_dma; /* qtd address */
- struct list_head qtd_list; /* sw qtd list */
- struct urb *urb; /* qtd's urb */
- size_t length; /* length of buffer */
-
- u32 qtd_buffer_len;
- void *buffer;
- dma_addr_t buffer_dma;
- void *transfer_buffer;
- void *transfer_dma;
-} __attribute__ ((aligned(32)));
-
-/* mask NakCnt+T in qh->hw_alt_next */
-#define QTD_MASK cpu_to_le32 (~0x1f)
-
-#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
-
-/* Type tag from {qh, itd, sitd, fstn}->hw_next */
-#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1))
-
-/* values for that type tag */
-#define Q_TYPE_QH cpu_to_le32 (1 << 1)
-
-/* next async queue entry, or pointer to interrupt/periodic QH */
-#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
-
-/* for periodic/async schedules and qtd lists, mark end of list */
-#define EHCI_LIST_END cpu_to_le32(1) /* "null pointer" to hw */
-
-/*
- * Entries in periodic shadow table are pointers to one of four kinds
- * of data structure. That's dictated by the hardware; a type tag is
- * encoded in the low bits of the hardware's periodic schedule. Use
- * Q_NEXT_TYPE to get the tag.
- *
- * For entries in the async schedule, the type tag always says "qh".
- */
-union ehci_shadow {
- struct ehci_qh *qh; /* Q_TYPE_QH */
- __le32 *hw_next; /* (all types) */
- void *ptr;
-};
-
-/*
- * EHCI Specification 0.95 Section 3.6
- * QH: describes control/bulk/interrupt endpoints
- * See Fig 3-7 "Queue Head Structure Layout".
- *
- * These appear in both the async and (for interrupt) periodic schedules.
- */
-
-struct ehci_qh {
- /* first part defined by EHCI spec */
- __le32 hw_next; /* see EHCI 3.6.1 */
- __le32 hw_info1; /* see EHCI 3.6.2 */
-#define QH_HEAD 0x00008000
- __le32 hw_info2; /* see EHCI 3.6.2 */
-#define QH_SMASK 0x000000ff
-#define QH_CMASK 0x0000ff00
-#define QH_HUBADDR 0x007f0000
-#define QH_HUBPORT 0x3f800000
-#define QH_MULT 0xc0000000
- __le32 hw_current; /* qtd list - see EHCI 3.6.4 */
-
- /* qtd overlay (hardware parts of a struct ehci_qtd) */
- __le32 hw_qtd_next;
- __le32 hw_alt_next;
- __le32 hw_token;
- __le32 hw_buf[5];
- __le32 hw_buf_hi[5];
-
- /* the rest is HCD-private */
- dma_addr_t qh_dma; /* address of qh */
- union ehci_shadow qh_next; /* ptr to qh; or periodic */
- struct list_head qtd_list; /* sw qtd list */
- struct ehci_qtd *dummy;
- struct ehci_qh *reclaim; /* next to reclaim */
-
- struct oxu_hcd *oxu;
- struct kref kref;
- unsigned stamp;
-
- u8 qh_state;
-#define QH_STATE_LINKED 1 /* HC sees this */
-#define QH_STATE_UNLINK 2 /* HC may still see this */
-#define QH_STATE_IDLE 3 /* HC doesn't see this */
-#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */
-#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
-
- /* periodic schedule info */
- u8 usecs; /* intr bandwidth */
- u8 gap_uf; /* uframes split/csplit gap */
- u8 c_usecs; /* ... split completion bw */
- u16 tt_usecs; /* tt downstream bandwidth */
- unsigned short period; /* polling interval */
- unsigned short start; /* where polling starts */
-#define NO_FRAME ((unsigned short)~0) /* pick new start */
- struct usb_device *dev; /* access to TT */
-} __attribute__ ((aligned(32)));
-
-/*
- * Proper OXU210HP structs
- */
-
-#define OXU_OTG_CORE_OFFSET 0x00400
-#define OXU_OTG_CAP_OFFSET (OXU_OTG_CORE_OFFSET + 0x100)
-#define OXU_SPH_CORE_OFFSET 0x00800
-#define OXU_SPH_CAP_OFFSET (OXU_SPH_CORE_OFFSET + 0x100)
-
-#define OXU_OTG_MEM 0xE000
-#define OXU_SPH_MEM 0x16000
-
-/* Only how many elements & element structure are specifies here. */
-/* 2 host controllers are enabled - total size <= 28 kbytes */
-#define DEFAULT_I_TDPS 1024
-#define QHEAD_NUM 16
-#define QTD_NUM 32
-#define SITD_NUM 8
-#define MURB_NUM 8
-
-#define BUFFER_NUM 8
-#define BUFFER_SIZE 512
-
-struct oxu_info {
- struct usb_hcd *hcd[2];
-};
-
-struct oxu_buf {
- u8 buffer[BUFFER_SIZE];
-} __attribute__ ((aligned(BUFFER_SIZE)));
-
-struct oxu_onchip_mem {
- struct oxu_buf db_pool[BUFFER_NUM];
-
- u32 frame_list[DEFAULT_I_TDPS];
- struct ehci_qh qh_pool[QHEAD_NUM];
- struct ehci_qtd qtd_pool[QTD_NUM];
-} __attribute__ ((aligned(4 << 10)));
-
-#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */
-
-struct oxu_murb {
- struct urb urb;
- struct urb *main;
- u8 last;
-};
-
-struct oxu_hcd { /* one per controller */
- unsigned int is_otg:1;
-
- u8 qh_used[QHEAD_NUM];
- u8 qtd_used[QTD_NUM];
- u8 db_used[BUFFER_NUM];
- u8 murb_used[MURB_NUM];
-
- struct oxu_onchip_mem __iomem *mem;
- spinlock_t mem_lock;
-
- struct timer_list urb_timer;
-
- struct ehci_caps __iomem *caps;
- struct ehci_regs __iomem *regs;
-
- __u32 hcs_params; /* cached register copy */
- spinlock_t lock;
-
- /* async schedule support */
- struct ehci_qh *async;
- struct ehci_qh *reclaim;
- unsigned reclaim_ready:1;
- unsigned scanning:1;
-
- /* periodic schedule support */
- unsigned periodic_size;
- __le32 *periodic; /* hw periodic table */
- dma_addr_t periodic_dma;
- unsigned i_thresh; /* uframes HC might cache */
-
- union ehci_shadow *pshadow; /* mirror hw periodic table */
- int next_uframe; /* scan periodic, start here */
- unsigned periodic_sched; /* periodic activity count */
-
- /* per root hub port */
- unsigned long reset_done[EHCI_MAX_ROOT_PORTS];
- /* bit vectors (one bit per port) */
- unsigned long bus_suspended; /* which ports were
- * already suspended at the
- * start of a bus suspend
- */
- unsigned long companion_ports;/* which ports are dedicated
- * to the companion controller
- */
-
- struct timer_list watchdog;
- unsigned long actions;
- unsigned stamp;
- unsigned long next_statechange;
- u32 command;
-
- /* SILICON QUIRKS */
- struct list_head urb_list; /* this is the head to urb
- * queue that didn't get enough
- * resources
- */
- struct oxu_murb *murb_pool; /* murb per split big urb */
- unsigned urb_len;
-
- u8 sbrn; /* packed release number */
-};
-
-#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */
-#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
-#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */
-#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */
-
-enum ehci_timer_action {
- TIMER_IO_WATCHDOG,
- TIMER_IAA_WATCHDOG,
- TIMER_ASYNC_SHRINK,
- TIMER_ASYNC_OFF,
-};
-
-#include <linux/oxu210hp.h>
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 42668aeca57c..0c03ac6b0213 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2411,12 +2411,6 @@ static int r8a66597_probe(struct platform_device *pdev)
if (usb_disabled())
return -ENODEV;
- if (pdev->dev.dma_mask) {
- ret = -EINVAL;
- dev_err(&pdev->dev, "dma not supported\n");
- goto clean_up;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENODEV;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 5b061e599948..72a34a1eb618 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1632,12 +1632,6 @@ sl811h_probe(struct platform_device *dev)
irq = ires->start;
irqflags = ires->flags & IRQF_TRIGGER_MASK;
- /* refuse to confuse usbcore */
- if (dev->dev.dma_mask) {
- dev_dbg(&dev->dev, "no we won't dma\n");
- return -EINVAL;
- }
-
/* the chip may be wired for either kind of addressing */
addr = platform_get_resource(dev, IORESOURCE_MEM, 0);
data = platform_get_resource(dev, IORESOURCE_MEM, 1);
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 400c40bc43a6..4efee34f154f 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -3077,8 +3077,6 @@ static int u132_probe(struct platform_device *pdev)
retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a);
if (retval)
return retval;
- if (pdev->dev.dma_mask)
- return -EINVAL;
hcd = usb_create_hcd(&u132_hc_driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c
index 2103b1ed0f8f..0a201a73b196 100644
--- a/drivers/usb/host/uhci-grlib.c
+++ b/drivers/usb/host/uhci-grlib.c
@@ -63,7 +63,7 @@ static const struct hc_driver uhci_grlib_hc_driver = {
/* Generic hardware linkage */
.irq = uhci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB11,
/* Basic lifecycle operations */
.reset = uhci_grlib_init,
diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
index 0dd944277c99..0fa3d72bae26 100644
--- a/drivers/usb/host/uhci-pci.c
+++ b/drivers/usb/host/uhci-pci.c
@@ -261,7 +261,7 @@ static const struct hc_driver uhci_driver = {
/* Generic hardware linkage */
.irq = uhci_irq,
- .flags = HCD_USB11,
+ .flags = HCD_DMA | HCD_USB11,
/* Basic lifecycle operations */
.reset = uhci_pci_init,
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 89700e26fb29..70dbd95c3f06 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -41,7 +41,7 @@ static const struct hc_driver uhci_platform_hc_driver = {
/* Generic hardware linkage */
.irq = uhci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB11,
/* Basic lifecycle operations */
.reset = uhci_platform_init,
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 52e32644a4b2..93e2cca5262d 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -22,7 +22,6 @@ dbc_dma_alloc_coherent(struct xhci_hcd *xhci, size_t size,
vaddr = dma_alloc_coherent(xhci_to_hcd(xhci)->self.sysdev,
size, dma_handle, flags);
- memset(vaddr, 0, size);
return vaddr;
}
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index aff79ff5aba4..be726c791323 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -139,14 +139,14 @@ xhci_dbc_alloc_requests(struct dbc_ep *dep, struct list_head *head,
struct dbc_request *req;
for (i = 0; i < DBC_QUEUE_SIZE; i++) {
- req = dbc_alloc_request(dep, GFP_ATOMIC);
+ req = dbc_alloc_request(dep, GFP_KERNEL);
if (!req)
break;
req->length = DBC_MAX_PACKET;
req->buf = kmalloc(req->length, GFP_KERNEL);
if (!req->buf) {
- xhci_dbc_free_req(dep, req);
+ dbc_free_request(dep, req);
break;
}
diff --git a/drivers/usb/host/xhci-ext-caps.c b/drivers/usb/host/xhci-ext-caps.c
index 399113f9fc5c..f498160df969 100644
--- a/drivers/usb/host/xhci-ext-caps.c
+++ b/drivers/usb/host/xhci-ext-caps.c
@@ -6,11 +6,20 @@
*/
#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/pci.h>
#include "xhci.h"
#define USB_SW_DRV_NAME "intel_xhci_usb_sw"
#define USB_SW_RESOURCE_SIZE 0x400
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
+
+static const struct property_entry role_switch_props[] = {
+ PROPERTY_ENTRY_BOOL("sw_switch_disable"),
+ {},
+};
+
static void xhci_intel_unregister_pdev(void *arg)
{
platform_device_unregister(arg);
@@ -21,6 +30,7 @@ static int xhci_create_intel_xhci_sw_pdev(struct xhci_hcd *xhci, u32 cap_offset)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct device *dev = hcd->self.controller;
struct platform_device *pdev;
+ struct pci_dev *pci = to_pci_dev(dev);
struct resource res = { 0, };
int ret;
@@ -43,6 +53,14 @@ static int xhci_create_intel_xhci_sw_pdev(struct xhci_hcd *xhci, u32 cap_offset)
return ret;
}
+ if (pci->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+ ret = platform_device_add_properties(pdev, role_switch_props);
+ if (ret) {
+ dev_err(dev, "failed to register device properties\n");
+ return ret;
+ }
+ }
+
pdev->dev.parent = dev;
ret = platform_device_add(pdev);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 3abe70ff1b1e..b7d23c438756 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1149,7 +1149,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
}
port_li = readl(ports[wIndex]->addr + PORTLI);
status = xhci_get_ext_port_status(temp, port_li);
- put_unaligned_le32(cpu_to_le32(status), &buf[4]);
+ put_unaligned_le32(status, &buf[4]);
}
break;
case SetPortFeature:
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index cf5e17962179..e16eda6e2b8b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2399,7 +2399,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
flags);
if (!xhci->dcbaa)
goto fail;
- memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
xhci->dcbaa->dma = dma;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Device context base array address = 0x%llx (DMA), %p (virt)",
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 026fe18972d3..b18a6baef204 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -216,6 +216,10 @@ static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk)
return PTR_ERR(mtk->sys_clk);
}
+ mtk->xhci_clk = devm_clk_get_optional(dev, "xhci_ck");
+ if (IS_ERR(mtk->xhci_clk))
+ return PTR_ERR(mtk->xhci_clk);
+
mtk->ref_clk = devm_clk_get_optional(dev, "ref_ck");
if (IS_ERR(mtk->ref_clk))
return PTR_ERR(mtk->ref_clk);
@@ -244,6 +248,12 @@ static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk)
goto sys_clk_err;
}
+ ret = clk_prepare_enable(mtk->xhci_clk);
+ if (ret) {
+ dev_err(mtk->dev, "failed to enable xhci_clk\n");
+ goto xhci_clk_err;
+ }
+
ret = clk_prepare_enable(mtk->mcu_clk);
if (ret) {
dev_err(mtk->dev, "failed to enable mcu_clk\n");
@@ -261,6 +271,8 @@ static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk)
dma_clk_err:
clk_disable_unprepare(mtk->mcu_clk);
mcu_clk_err:
+ clk_disable_unprepare(mtk->xhci_clk);
+xhci_clk_err:
clk_disable_unprepare(mtk->sys_clk);
sys_clk_err:
clk_disable_unprepare(mtk->ref_clk);
@@ -272,6 +284,7 @@ static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
{
clk_disable_unprepare(mtk->dma_clk);
clk_disable_unprepare(mtk->mcu_clk);
+ clk_disable_unprepare(mtk->xhci_clk);
clk_disable_unprepare(mtk->sys_clk);
clk_disable_unprepare(mtk->ref_clk);
}
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 8be8c5f7ff62..5ac458b7d2e0 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -139,6 +139,7 @@ struct xhci_hcd_mtk {
struct regulator *vusb33;
struct regulator *vbus;
struct clk *sys_clk; /* sys and mac clock */
+ struct clk *xhci_clk;
struct clk *ref_clk;
struct clk *mcu_clk;
struct clk *dma_clk;
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 998241f5fce3..d90cd5ec09cf 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -66,12 +66,14 @@ static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
+ struct xhci_plat_priv *priv = xhci_to_priv(xhci);
+
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
- xhci->quirks |= XHCI_PLAT;
+ xhci->quirks |= XHCI_PLAT | priv->quirks;
}
/* called during probe() after chip reset completes */
@@ -103,17 +105,11 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
- .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
- .init_quirk = xhci_rcar_init_quirk,
- .plat_start = xhci_rcar_start,
- .resume_quirk = xhci_rcar_resume_quirk,
+ SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1)
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
- .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3,
- .init_quirk = xhci_rcar_init_quirk,
- .plat_start = xhci_rcar_start,
- .resume_quirk = xhci_rcar_resume_quirk,
+ SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3)
};
static const struct of_device_id usb_xhci_of_match[] = {
@@ -307,7 +303,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
ret = usb_phy_init(hcd->usb_phy);
if (ret)
goto put_usb3_hcd;
- hcd->skip_phy_initialization = 1;
}
hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
index ae29f22ff5bd..5681723fc9cd 100644
--- a/drivers/usb/host/xhci-plat.h
+++ b/drivers/usb/host/xhci-plat.h
@@ -12,10 +12,12 @@
struct xhci_plat_priv {
const char *firmware_name;
+ unsigned long long quirks;
void (*plat_start)(struct usb_hcd *);
int (*init_quirk)(struct usb_hcd *);
int (*resume_quirk)(struct usb_hcd *);
};
#define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
+#define xhci_to_priv(x) ((struct xhci_plat_priv *)(x)->priv)
#endif /* _XHCI_PLAT_H */
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index 2b0ccd150209..c1025d321a41 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -107,15 +107,6 @@ static int xhci_rcar_is_gen2(struct device *dev)
of_device_is_compatible(node, "renesas,rcar-gen2-xhci");
}
-static int xhci_rcar_is_gen3(struct device *dev)
-{
- struct device_node *node = dev->of_node;
-
- return of_device_is_compatible(node, "renesas,xhci-r8a7795") ||
- of_device_is_compatible(node, "renesas,xhci-r8a7796") ||
- of_device_is_compatible(node, "renesas,rcar-gen3-xhci");
-}
-
void xhci_rcar_start(struct usb_hcd *hcd)
{
u32 temp;
@@ -226,32 +217,13 @@ static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
/* This function needs to initialize a "phy" of usb before */
int xhci_rcar_init_quirk(struct usb_hcd *hcd)
{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
/* If hcd->regs is NULL, we don't just call the following function */
if (!hcd->regs)
return 0;
- /*
- * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
- * to 1. However, these SoCs don't support 64-bit address memory
- * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
- * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
- * xhci_gen_setup().
- *
- * And, since the firmware/internal CPU control the USBSTS.STS_HALT
- * and the process speed is down when the roothub port enters U3,
- * long delay for the handshake of STS_HALT is neeed in xhci_suspend().
- */
- if (xhci_rcar_is_gen2(hcd->self.controller) ||
- xhci_rcar_is_gen3(hcd->self.controller)) {
- xhci->quirks |= XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND;
- }
-
if (!xhci_rcar_wait_for_pll_active(hcd))
return -ETIMEDOUT;
- xhci->quirks |= XHCI_TRUST_TX_LENGTH;
return xhci_rcar_download_firmware(hcd);
}
diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h
index 804b6ab4246f..012744a63a49 100644
--- a/drivers/usb/host/xhci-rcar.h
+++ b/drivers/usb/host/xhci-rcar.h
@@ -31,4 +31,25 @@ static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
return 0;
}
#endif
+
+/*
+ * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
+ * to 1. However, these SoCs don't support 64-bit address memory
+ * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
+ * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
+ * xhci_gen_setup() by using the XHCI_NO_64BIT_SUPPORT quirk.
+ *
+ * And, since the firmware/internal CPU control the USBSTS.STS_HALT
+ * and the process speed is down when the roothub port enters U3,
+ * long delay for the handshake of STS_HALT is neeed in xhci_suspend()
+ * by using the XHCI_SLOW_SUSPEND quirk.
+ */
+#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware) \
+ .firmware_name = firmware, \
+ .quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH | \
+ XHCI_SLOW_SUSPEND, \
+ .init_quirk = xhci_rcar_init_quirk, \
+ .plat_start = xhci_rcar_start, \
+ .resume_quirk = xhci_rcar_resume_quirk,
+
#endif /* _XHCI_RCAR_H */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 03d1e552769b..500865975687 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3814,7 +3814,6 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING;
del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
}
- xhci_debugfs_remove_slot(xhci, udev->slot_id);
virt_dev->udev = NULL;
ret = xhci_disable_slot(xhci, udev->slot_id);
if (ret)
@@ -3832,6 +3831,8 @@ int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
if (!command)
return -ENOMEM;
+ xhci_debugfs_remove_slot(xhci, slot_id);
+
spin_lock_irqsave(&xhci->lock, flags);
/* Don't disable the slot if the host controller is dead. */
state = readl(&xhci->op_regs->status);
@@ -5217,7 +5218,7 @@ static const struct hc_driver xhci_hc_driver = {
* generic hardware linkage
*/
.irq = xhci_irq,
- .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED,
+ .flags = HCD_MEMORY | HCD_DMA | HCD_USB3 | HCD_SHARED,
/*
* basic lifecycle operations
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f5c41448d067..f9f88626a57a 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2337,12 +2337,13 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2,
break;
case TRB_RESET_EP:
sprintf(str,
- "%s: ctx %08x%08x slot %d ep %d flags %c",
+ "%s: ctx %08x%08x slot %d ep %d flags %c:%c",
xhci_trb_type_string(type),
field1, field0,
TRB_TO_SLOT_ID(field3),
/* Macro decrements 1, maybe it shouldn't?!? */
TRB_TO_EP_INDEX(field3) + 1,
+ field3 & TRB_TSP ? 'T' : 't',
field3 & TRB_CYCLE ? 'C' : 'c');
break;
case TRB_STOP_RING:
diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c
index 55b94fd10331..fdeb4cf97cc5 100644
--- a/drivers/usb/isp1760/isp1760-core.c
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -120,9 +120,6 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
(!IS_ENABLED(CONFIG_USB_ISP1761_UDC) || udc_disabled))
return -ENODEV;
- /* prevent usb-core allocating DMA pages */
- dev->dma_mask = NULL;
-
isp = devm_kzalloc(dev, sizeof(*isp), GFP_KERNEL);
if (!isp)
return -ENOMEM;
diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c
index 241a00d75027..07cc82ff327c 100644
--- a/drivers/usb/isp1760/isp1760-if.c
+++ b/drivers/usb/isp1760/isp1760-if.c
@@ -139,7 +139,6 @@ static int isp1761_pci_probe(struct pci_dev *dev,
pci_set_master(dev);
- dev->dev.dma_mask = NULL;
ret = isp1760_register(&dev->resource[3], dev->irq, 0, &dev->dev,
devflags);
if (ret < 0)
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 9d780b77314b..14faec51d7a5 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -183,6 +183,7 @@ static ssize_t port0_show(struct device *dev,
{
return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
}
+static DEVICE_ATTR_RW(port0);
/* attribute callback handler (read) */
static ssize_t port1_show(struct device *dev,
@@ -190,11 +191,14 @@ static ssize_t port1_show(struct device *dev,
{
return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
}
-
-static DEVICE_ATTR_RW(port0);
-
static DEVICE_ATTR_RW(port1);
+static struct attribute *cypress_attrs[] = {
+ &dev_attr_port0.attr,
+ &dev_attr_port1.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(cypress);
static int cypress_probe(struct usb_interface *interface,
const struct usb_device_id *id)
@@ -212,26 +216,11 @@ static int cypress_probe(struct usb_interface *interface,
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
- /* create device attribute files */
- retval = device_create_file(&interface->dev, &dev_attr_port0);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_port1);
- if (retval)
- goto error;
-
/* let the user know that the device is now attached */
dev_info(&interface->dev,
"Cypress CY7C63xxx device now attached\n");
return 0;
-error:
- device_remove_file(&interface->dev, &dev_attr_port0);
- device_remove_file(&interface->dev, &dev_attr_port1);
- usb_set_intfdata(interface, NULL);
- usb_put_dev(dev->udev);
- kfree(dev);
-
error_mem:
return retval;
}
@@ -242,9 +231,6 @@ static void cypress_disconnect(struct usb_interface *interface)
dev = usb_get_intfdata(interface);
- /* remove device attribute files */
- device_remove_file(&interface->dev, &dev_attr_port0);
- device_remove_file(&interface->dev, &dev_attr_port1);
/* the intfdata can be set to NULL only after the
* device files have been removed */
usb_set_intfdata(interface, NULL);
@@ -262,6 +248,7 @@ static struct usb_driver cypress_driver = {
.probe = cypress_probe,
.disconnect = cypress_disconnect,
.id_table = cypress_table,
+ .dev_groups = cypress_groups,
};
module_usb_driver(cypress_driver);
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index 8b15ab5e1450..3e3802aaefa3 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -36,20 +36,6 @@ struct usb_cytherm {
};
-/* local function prototypes */
-static int cytherm_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-static void cytherm_disconnect(struct usb_interface *interface);
-
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver cytherm_driver = {
- .name = "cytherm",
- .probe = cytherm_probe,
- .disconnect = cytherm_disconnect,
- .id_table = id_table,
-};
-
/* Vendor requests */
/* They all operate on one byte at a time */
#define PING 0x00
@@ -304,6 +290,15 @@ static ssize_t port1_store(struct device *dev, struct device_attribute *attr, co
}
static DEVICE_ATTR_RW(port1);
+static struct attribute *cytherm_attrs[] = {
+ &dev_attr_brightness.attr,
+ &dev_attr_temp.attr,
+ &dev_attr_button.attr,
+ &dev_attr_port0.attr,
+ &dev_attr_port1.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(cytherm);
static int cytherm_probe(struct usb_interface *interface,
const struct usb_device_id *id)
@@ -322,34 +317,10 @@ static int cytherm_probe(struct usb_interface *interface,
dev->brightness = 0xFF;
- retval = device_create_file(&interface->dev, &dev_attr_brightness);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_temp);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_button);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_port0);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_port1);
- if (retval)
- goto error;
-
dev_info (&interface->dev,
"Cypress thermometer device now attached\n");
return 0;
-error:
- device_remove_file(&interface->dev, &dev_attr_brightness);
- device_remove_file(&interface->dev, &dev_attr_temp);
- device_remove_file(&interface->dev, &dev_attr_button);
- device_remove_file(&interface->dev, &dev_attr_port0);
- device_remove_file(&interface->dev, &dev_attr_port1);
- usb_set_intfdata (interface, NULL);
- usb_put_dev(dev->udev);
- kfree(dev);
+
error_mem:
return retval;
}
@@ -360,12 +331,6 @@ static void cytherm_disconnect(struct usb_interface *interface)
dev = usb_get_intfdata (interface);
- device_remove_file(&interface->dev, &dev_attr_brightness);
- device_remove_file(&interface->dev, &dev_attr_temp);
- device_remove_file(&interface->dev, &dev_attr_button);
- device_remove_file(&interface->dev, &dev_attr_port0);
- device_remove_file(&interface->dev, &dev_attr_port1);
-
/* first remove the files, then NULL the pointer */
usb_set_intfdata (interface, NULL);
@@ -376,6 +341,15 @@ static void cytherm_disconnect(struct usb_interface *interface)
dev_info(&interface->dev, "Cypress thermometer now disconnected\n");
}
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver cytherm_driver = {
+ .name = "cytherm",
+ .probe = cytherm_probe,
+ .disconnect = cytherm_disconnect,
+ .id_table = id_table,
+ .dev_groups = cytherm_groups,
+};
+
module_usb_driver(cytherm_driver);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
index e5c03c6d16e9..407fe7570f3b 100644
--- a/drivers/usb/misc/lvstest.c
+++ b/drivers/usb/misc/lvstest.c
@@ -310,7 +310,7 @@ static ssize_t enable_compliance_store(struct device *dev,
}
static DEVICE_ATTR_WO(enable_compliance);
-static struct attribute *lvs_attributes[] = {
+static struct attribute *lvs_attrs[] = {
&dev_attr_get_dev_desc.attr,
&dev_attr_u1_timeout.attr,
&dev_attr_u2_timeout.attr,
@@ -321,10 +321,7 @@ static struct attribute *lvs_attributes[] = {
&dev_attr_enable_compliance.attr,
NULL
};
-
-static const struct attribute_group lvs_attr_group = {
- .attrs = lvs_attributes,
-};
+ATTRIBUTE_GROUPS(lvs);
static void lvs_rh_work(struct work_struct *work)
{
@@ -439,12 +436,6 @@ static int lvs_rh_probe(struct usb_interface *intf,
INIT_WORK(&lvs->rh_work, lvs_rh_work);
- ret = sysfs_create_group(&intf->dev.kobj, &lvs_attr_group);
- if (ret < 0) {
- dev_err(&intf->dev, "Failed to create sysfs node %d\n", ret);
- goto free_urb;
- }
-
pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
usb_fill_int_urb(lvs->urb, hdev, pipe, &lvs->buffer[0], maxp,
@@ -453,13 +444,11 @@ static int lvs_rh_probe(struct usb_interface *intf,
ret = usb_submit_urb(lvs->urb, GFP_KERNEL);
if (ret < 0) {
dev_err(&intf->dev, "couldn't submit lvs urb %d\n", ret);
- goto sysfs_remove;
+ goto free_urb;
}
return ret;
-sysfs_remove:
- sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group);
free_urb:
usb_free_urb(lvs->urb);
return ret;
@@ -469,7 +458,6 @@ static void lvs_rh_disconnect(struct usb_interface *intf)
{
struct lvs_rh *lvs = usb_get_intfdata(intf);
- sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group);
usb_poison_urb(lvs->urb); /* used in scheduled work */
flush_work(&lvs->rh_work);
usb_free_urb(lvs->urb);
@@ -479,6 +467,7 @@ static struct usb_driver lvs_driver = {
.name = "lvs",
.probe = lvs_rh_probe,
.disconnect = lvs_rh_disconnect,
+ .dev_groups = lvs_groups,
};
module_usb_driver(lvs_driver);
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index a32d61a79ab8..30cae5e1954d 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -51,7 +51,6 @@ struct rio_usb_data {
char *obuf, *ibuf; /* transfer buffers */
char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
wait_queue_head_t wait_q; /* for timeouts */
- struct mutex lock; /* general race avoidance */
};
static DEFINE_MUTEX(rio500_mutex);
@@ -63,10 +62,8 @@ static int open_rio(struct inode *inode, struct file *file)
/* against disconnect() */
mutex_lock(&rio500_mutex);
- mutex_lock(&(rio->lock));
if (rio->isopen || !rio->present) {
- mutex_unlock(&(rio->lock));
mutex_unlock(&rio500_mutex);
return -EBUSY;
}
@@ -74,7 +71,6 @@ static int open_rio(struct inode *inode, struct file *file)
init_waitqueue_head(&rio->wait_q);
- mutex_unlock(&(rio->lock));
dev_info(&rio->rio_dev->dev, "Rio opened.\n");
mutex_unlock(&rio500_mutex);
@@ -88,7 +84,6 @@ static int close_rio(struct inode *inode, struct file *file)
/* against disconnect() */
mutex_lock(&rio500_mutex);
- mutex_lock(&(rio->lock));
rio->isopen = 0;
if (!rio->present) {
@@ -100,7 +95,6 @@ static int close_rio(struct inode *inode, struct file *file)
} else {
dev_info(&rio->rio_dev->dev, "Rio closed.\n");
}
- mutex_unlock(&(rio->lock));
mutex_unlock(&rio500_mutex);
return 0;
}
@@ -115,7 +109,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
int retries;
int retval=0;
- mutex_lock(&(rio->lock));
+ mutex_lock(&rio500_mutex);
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
retval = -ENODEV;
@@ -259,7 +253,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
err_out:
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return retval;
}
@@ -279,12 +273,12 @@ write_rio(struct file *file, const char __user *buffer,
int errn = 0;
int intr;
- intr = mutex_lock_interruptible(&(rio->lock));
+ intr = mutex_lock_interruptible(&rio500_mutex);
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return -ENODEV;
}
@@ -307,7 +301,7 @@ write_rio(struct file *file, const char __user *buffer,
goto error;
}
if (signal_pending(current)) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return bytes_written ? bytes_written : -EINTR;
}
@@ -345,12 +339,12 @@ write_rio(struct file *file, const char __user *buffer,
buffer += copy_size;
} while (count > 0);
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return bytes_written ? bytes_written : -EIO;
error:
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return errn;
}
@@ -367,12 +361,12 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
char *ibuf;
int intr;
- intr = mutex_lock_interruptible(&(rio->lock));
+ intr = mutex_lock_interruptible(&rio500_mutex);
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return -ENODEV;
}
@@ -383,11 +377,11 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
while (count > 0) {
if (signal_pending(current)) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return read_count ? read_count : -EINTR;
}
if (!rio->rio_dev) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return -ENODEV;
}
this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
@@ -405,7 +399,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
count = this_read = partial;
} else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */
if (!maxretry--) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
dev_err(&rio->rio_dev->dev,
"read_rio: maxretry timeout\n");
return -ETIME;
@@ -415,19 +409,19 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
finish_wait(&rio->wait_q, &wait);
continue;
} else if (result != -EREMOTEIO) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
dev_err(&rio->rio_dev->dev,
"Read Whoops - result:%d partial:%u this_read:%u\n",
result, partial, this_read);
return -EIO;
} else {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return (0);
}
if (this_read) {
if (copy_to_user(buffer, ibuf, this_read)) {
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return -EFAULT;
}
count -= this_read;
@@ -435,7 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
buffer += this_read;
}
}
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
return read_count;
}
@@ -460,53 +454,55 @@ static int probe_rio(struct usb_interface *intf,
{
struct usb_device *dev = interface_to_usbdev(intf);
struct rio_usb_data *rio = &rio_instance;
- int retval = 0;
+ int retval = -ENOMEM;
+ char *ibuf, *obuf;
- mutex_lock(&rio500_mutex);
if (rio->present) {
dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
- retval = -EBUSY;
- goto bail_out;
- } else {
- dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
+ return -EBUSY;
}
+ dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
- retval = usb_register_dev(intf, &usb_rio_class);
- if (retval) {
- dev_err(&dev->dev,
- "Not able to get a minor for this device.\n");
- retval = -ENOMEM;
- goto bail_out;
- }
-
- rio->rio_dev = dev;
-
- if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) {
+ obuf = kmalloc(OBUF_SIZE, GFP_KERNEL);
+ if (!obuf) {
dev_err(&dev->dev,
"probe_rio: Not enough memory for the output buffer\n");
- usb_deregister_dev(intf, &usb_rio_class);
- retval = -ENOMEM;
- goto bail_out;
+ goto err_obuf;
}
- dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
+ dev_dbg(&intf->dev, "obuf address: %p\n", obuf);
- if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) {
+ ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL);
+ if (!ibuf) {
dev_err(&dev->dev,
"probe_rio: Not enough memory for the input buffer\n");
- usb_deregister_dev(intf, &usb_rio_class);
- kfree(rio->obuf);
- retval = -ENOMEM;
- goto bail_out;
+ goto err_ibuf;
}
- dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
-
- mutex_init(&(rio->lock));
+ dev_dbg(&intf->dev, "ibuf address: %p\n", ibuf);
- usb_set_intfdata (intf, rio);
+ mutex_lock(&rio500_mutex);
+ rio->rio_dev = dev;
+ rio->ibuf = ibuf;
+ rio->obuf = obuf;
rio->present = 1;
-bail_out:
mutex_unlock(&rio500_mutex);
+ retval = usb_register_dev(intf, &usb_rio_class);
+ if (retval) {
+ dev_err(&dev->dev,
+ "Not able to get a minor for this device.\n");
+ goto err_register;
+ }
+
+ usb_set_intfdata(intf, rio);
+ return retval;
+
+ err_register:
+ mutex_lock(&rio500_mutex);
+ rio->present = 0;
+ mutex_unlock(&rio500_mutex);
+ err_ibuf:
+ kfree(obuf);
+ err_obuf:
return retval;
}
@@ -515,16 +511,14 @@ static void disconnect_rio(struct usb_interface *intf)
struct rio_usb_data *rio = usb_get_intfdata (intf);
usb_set_intfdata (intf, NULL);
- mutex_lock(&rio500_mutex);
if (rio) {
usb_deregister_dev(intf, &usb_rio_class);
- mutex_lock(&(rio->lock));
+ mutex_lock(&rio500_mutex);
if (rio->isopen) {
rio->isopen = 0;
/* better let it finish - the release will do whats needed */
rio->rio_dev = NULL;
- mutex_unlock(&(rio->lock));
mutex_unlock(&rio500_mutex);
return;
}
@@ -534,9 +528,8 @@ static void disconnect_rio(struct usb_interface *intf)
dev_info(&intf->dev, "USB Rio disconnected.\n");
rio->present = 0;
- mutex_unlock(&(rio->lock));
+ mutex_unlock(&rio500_mutex);
}
- mutex_unlock(&rio500_mutex);
}
static const struct usb_device_id rio_table[] = {
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index ac357ce2d1a6..a3dfc77578ea 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -71,9 +71,14 @@ static ssize_t speed_store(struct device *dev, struct device_attribute *attr,
}
return count;
}
-
static DEVICE_ATTR_RW(speed);
+static struct attribute *tv_attrs[] = {
+ &dev_attr_speed.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(tv);
+
static int tv_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
@@ -89,15 +94,9 @@ static int tv_probe(struct usb_interface *interface,
dev->udev = usb_get_dev(udev);
usb_set_intfdata(interface, dev);
- retval = device_create_file(&interface->dev, &dev_attr_speed);
- if (retval)
- goto error_create_file;
return 0;
-error_create_file:
- usb_put_dev(udev);
- usb_set_intfdata(interface, NULL);
error:
kfree(dev);
return retval;
@@ -108,7 +107,6 @@ static void tv_disconnect(struct usb_interface *interface)
struct trancevibrator *dev;
dev = usb_get_intfdata (interface);
- device_remove_file(&interface->dev, &dev_attr_speed);
usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
kfree(dev);
@@ -120,6 +118,7 @@ static struct usb_driver tv_driver = {
.probe = tv_probe,
.disconnect = tv_disconnect,
.id_table = id_table,
+ .dev_groups = tv_groups,
};
module_usb_driver(tv_driver);
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 1923d5b6d9c9..551074f5b7ad 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -316,7 +316,7 @@ MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);
MYDEV_ATTR_SIMPLE_UNSIGNED(mode_msb, update_display_mode);
MYDEV_ATTR_SIMPLE_UNSIGNED(mode_lsb, update_display_mode);
-static struct attribute *dev_attrs[] = {
+static struct attribute *sevseg_attrs[] = {
&dev_attr_powered.attr,
&dev_attr_text.attr,
&dev_attr_textmode.attr,
@@ -325,10 +325,7 @@ static struct attribute *dev_attrs[] = {
&dev_attr_mode_lsb.attr,
NULL
};
-
-static const struct attribute_group dev_attr_grp = {
- .attrs = dev_attrs,
-};
+ATTRIBUTE_GROUPS(sevseg);
static int sevseg_probe(struct usb_interface *interface,
const struct usb_device_id *id)
@@ -354,17 +351,9 @@ static int sevseg_probe(struct usb_interface *interface,
mydev->mode_msb = 0x06; /* 6 characters */
mydev->mode_lsb = 0x3f; /* scanmode for 6 chars */
- rc = sysfs_create_group(&interface->dev.kobj, &dev_attr_grp);
- if (rc)
- goto error;
-
dev_info(&interface->dev, "USB 7 Segment device now attached\n");
return 0;
-error:
- usb_set_intfdata(interface, NULL);
- usb_put_dev(mydev->udev);
- kfree(mydev);
error_mem:
return rc;
}
@@ -374,7 +363,6 @@ static void sevseg_disconnect(struct usb_interface *interface)
struct usb_sevsegdev *mydev;
mydev = usb_get_intfdata(interface);
- sysfs_remove_group(&interface->dev.kobj, &dev_attr_grp);
usb_set_intfdata(interface, NULL);
usb_put_dev(mydev->udev);
kfree(mydev);
@@ -423,6 +411,7 @@ static struct usb_driver sevseg_driver = {
.resume = sevseg_resume,
.reset_resume = sevseg_reset_resume,
.id_table = id_table,
+ .dev_groups = sevseg_groups,
.supports_autosuspend = 1,
};
diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig
index 928c2cd6fc00..bf98fd36341d 100644
--- a/drivers/usb/mtu3/Kconfig
+++ b/drivers/usb/mtu3/Kconfig
@@ -44,6 +44,7 @@ config USB_MTU3_DUAL_ROLE
bool "Dual Role mode"
depends on ((USB=y || USB=USB_MTU3) && (USB_GADGET=y || USB_GADGET=USB_MTU3))
depends on (EXTCON=y || EXTCON=USB_MTU3)
+ select USB_ROLE_SWITCH
help
This is the default mode of working of MTU3 controller where
both host and gadget features are enabled.
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 76ecf12fdf62..6087be236a35 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -199,6 +199,9 @@ struct mtu3_gpd_ring {
* @id_nb : notifier for iddig(idpin) detection
* @id_work : work of iddig detection notifier
* @id_event : event of iddig detecion notifier
+* @role_sw : use USB Role Switch to support dual-role switch, can't use
+* extcon at the same time, and extcon is deprecated.
+* @role_sw_used : true when the USB Role Switch is used.
* @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
* @manual_drd_enabled: it's true when supports dual-role device by debugfs
* to switch host/device modes depending on user input.
@@ -212,6 +215,8 @@ struct otg_switch_mtk {
struct notifier_block id_nb;
struct work_struct id_work;
unsigned long id_event;
+ struct usb_role_switch *role_sw;
+ bool role_sw_used;
bool is_u3_drd;
bool manual_drd_enabled;
};
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index f8bd1d57e795..c3d5c1206eec 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -835,10 +835,8 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
return -ENOMEM;
mtu->irq = platform_get_irq(pdev, 0);
- if (mtu->irq < 0) {
- dev_err(dev, "fail to get irq number\n");
+ if (mtu->irq < 0)
return mtu->irq;
- }
dev_info(dev, "irq %d\n", mtu->irq);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac");
diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c
index 62c57ddc554e..c96e5dab0a48 100644
--- a/drivers/usb/mtu3/mtu3_debugfs.c
+++ b/drivers/usb/mtu3/mtu3_debugfs.c
@@ -453,9 +453,9 @@ static ssize_t ssusb_mode_write(struct file *file, const char __user *ubuf,
return -EFAULT;
if (!strncmp(buf, "host", 4) && !ssusb->is_host) {
- ssusb_mode_manual_switch(ssusb, 1);
+ ssusb_mode_switch(ssusb, 1);
} else if (!strncmp(buf, "device", 6) && ssusb->is_host) {
- ssusb_mode_manual_switch(ssusb, 0);
+ ssusb_mode_switch(ssusb, 0);
} else {
dev_err(ssusb->dev, "wrong or duplicated setting\n");
return -EINVAL;
diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
index 5fcb71af875a..08e18448e8b8 100644
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -7,6 +7,8 @@
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
*/
+#include <linux/usb/role.h>
+
#include "mtu3.h"
#include "mtu3_dr.h"
#include "mtu3_debug.h"
@@ -280,7 +282,7 @@ static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx)
* This is useful in special cases, such as uses TYPE-A receptacle but also
* wants to support dual-role mode.
*/
-void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
+void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
@@ -318,6 +320,47 @@ void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
}
+static int ssusb_role_sw_set(struct device *dev, enum usb_role role)
+{
+ struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
+ bool to_host = false;
+
+ if (role == USB_ROLE_HOST)
+ to_host = true;
+
+ if (to_host ^ ssusb->is_host)
+ ssusb_mode_switch(ssusb, to_host);
+
+ return 0;
+}
+
+static enum usb_role ssusb_role_sw_get(struct device *dev)
+{
+ struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
+ enum usb_role role;
+
+ role = ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+
+ return role;
+}
+
+static int ssusb_role_sw_register(struct otg_switch_mtk *otg_sx)
+{
+ struct usb_role_switch_desc role_sx_desc = { 0 };
+ struct ssusb_mtk *ssusb =
+ container_of(otg_sx, struct ssusb_mtk, otg_switch);
+
+ if (!otg_sx->role_sw_used)
+ return 0;
+
+ role_sx_desc.set = ssusb_role_sw_set;
+ role_sx_desc.get = ssusb_role_sw_get;
+ role_sx_desc.fwnode = dev_fwnode(ssusb->dev);
+ otg_sx->role_sw = usb_role_switch_register(ssusb->dev, &role_sx_desc);
+
+ return PTR_ERR_OR_ZERO(otg_sx->role_sw);
+}
+
int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
@@ -328,6 +371,8 @@ int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
if (otg_sx->manual_drd_enabled)
ssusb_dr_debugfs_init(ssusb);
+ else if (otg_sx->role_sw_used)
+ ret = ssusb_role_sw_register(otg_sx);
else
ret = ssusb_extcon_register(otg_sx);
@@ -340,4 +385,5 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
cancel_work_sync(&otg_sx->id_work);
cancel_work_sync(&otg_sx->vbus_work);
+ usb_role_switch_unregister(otg_sx->role_sw);
}
diff --git a/drivers/usb/mtu3/mtu3_dr.h b/drivers/usb/mtu3/mtu3_dr.h
index ba6fe357ce29..5e58c4dbd54a 100644
--- a/drivers/usb/mtu3/mtu3_dr.h
+++ b/drivers/usb/mtu3/mtu3_dr.h
@@ -71,7 +71,7 @@ static inline void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
#if IS_ENABLED(CONFIG_USB_MTU3_DUAL_ROLE)
int ssusb_otg_switch_init(struct ssusb_mtk *ssusb);
void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb);
-void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host);
+void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host);
int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on);
void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
enum mtu3_dr_force_mode mode);
@@ -86,8 +86,8 @@ static inline int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
static inline void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
{}
-static inline void
-ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host) {}
+static inline void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
+{}
static inline int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
{
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index fd0f6c5dfbc1..9c256ea3cdf5 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -299,8 +299,9 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd");
otg_sx->manual_drd_enabled =
of_property_read_bool(node, "enable-manual-drd");
+ otg_sx->role_sw_used = of_property_read_bool(node, "usb-role-switch");
- if (of_property_read_bool(node, "extcon")) {
+ if (!otg_sx->role_sw_used && of_property_read_bool(node, "extcon")) {
otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0);
if (IS_ERR(otg_sx->edev)) {
dev_err(ssusb->dev, "couldn't get extcon device\n");
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 9f5a4819a744..bd63450af76a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1721,7 +1721,7 @@ mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct musb *musb = dev_to_musb(dev);
unsigned long flags;
- int ret = -EINVAL;
+ int ret;
spin_lock_irqsave(&musb->lock, flags);
ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->otg->state));
@@ -1829,16 +1829,13 @@ static ssize_t srp_store(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR_WO(srp);
-static struct attribute *musb_attributes[] = {
+static struct attribute *musb_attrs[] = {
&dev_attr_mode.attr,
&dev_attr_vbus.attr,
&dev_attr_srp.attr,
NULL
};
-
-static const struct attribute_group musb_attr_group = {
- .attrs = musb_attributes,
-};
+ATTRIBUTE_GROUPS(musb);
#define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \
(2 << MUSB_DEVCTL_VBUS_SHIFT) | \
@@ -2038,10 +2035,6 @@ static void musb_free(struct musb *musb)
* cleanup after everything's been de-activated.
*/
-#ifdef CONFIG_SYSFS
- sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
-#endif
-
if (musb->nIrq >= 0) {
if (musb->irq_wake)
disable_irq_wake(musb->nIrq);
@@ -2390,22 +2383,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_init_debugfs(musb);
- status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
- if (status)
- goto fail5;
-
musb->is_initialized = 1;
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
return 0;
-fail5:
- musb_exit_debugfs(musb);
-
- musb_gadget_cleanup(musb);
- musb_host_cleanup(musb);
-
fail3:
cancel_delayed_work_sync(&musb->irq_work);
cancel_delayed_work_sync(&musb->finish_resume_work);
@@ -2798,6 +2781,7 @@ static struct platform_driver musb_driver = {
.name = (char *)musb_driver_name,
.bus = &platform_bus_type,
.pm = MUSB_DEV_PM_OPS,
+ .dev_groups = musb_groups,
},
.probe = musb_probe,
.remove = musb_remove,
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index eb308ec35c66..5a44b70372d9 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2689,7 +2689,7 @@ static const struct hc_driver musb_hc_driver = {
.description = "musb-hcd",
.product_desc = "MUSB HDRC host driver",
.hcd_priv_size = sizeof(struct musb *),
- .flags = HCD_USB2 | HCD_MEMORY,
+ .flags = HCD_USB2 | HCD_DMA | HCD_MEMORY,
/* not using irq handler or reset hooks from usbcore, since
* those must be shared with peripheral code for OTG configs
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index aaf363f19714..4bb4b1d42f32 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -330,6 +330,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
switch (lsts) {
case USB_LINK_ACA_RID_B_8505:
event = UX500_MUSB_RIDB;
+ /* Fall through */
case USB_LINK_NOT_CONFIGURED_8505:
case USB_LINK_RESERVED0_8505:
case USB_LINK_RESERVED1_8505:
@@ -350,6 +351,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_C_NM_8505:
event = UX500_MUSB_RIDC;
+ /* Fall through */
case USB_LINK_STD_HOST_NC_8505:
case USB_LINK_STD_HOST_C_NS_8505:
case USB_LINK_STD_HOST_C_S_8505:
@@ -368,6 +370,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_A_8505:
case USB_LINK_ACA_DOCK_CHGR_8505:
event = UX500_MUSB_RIDA;
+ /* Fall through */
case USB_LINK_HM_IDGND_8505:
if (ab->mode == USB_IDLE) {
ab->mode = USB_HOST;
@@ -422,6 +425,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
switch (lsts) {
case USB_LINK_ACA_RID_B_8500:
event = UX500_MUSB_RIDB;
+ /* Fall through */
case USB_LINK_NOT_CONFIGURED_8500:
case USB_LINK_NOT_VALID_LINK_8500:
ab->mode = USB_IDLE;
@@ -438,6 +442,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_C_HS_8500:
case USB_LINK_ACA_RID_C_HS_CHIRP_8500:
event = UX500_MUSB_RIDC;
+ /* Fall through */
case USB_LINK_STD_HOST_NC_8500:
case USB_LINK_STD_HOST_C_NS_8500:
case USB_LINK_STD_HOST_C_S_8500:
@@ -457,6 +462,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_A_8500:
event = UX500_MUSB_RIDA;
+ /* Fall through */
case USB_LINK_HM_IDGND_8500:
if (ab->mode == USB_IDLE) {
ab->mode = USB_HOST;
@@ -712,10 +718,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) {
irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
- if (irq < 0) {
- dev_err(&pdev->dev, "Link status irq not found\n");
+ if (irq < 0)
return irq;
- }
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
ab8500_usb_link_status_irq,
IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
@@ -728,10 +732,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) {
irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "ID fall irq not found\n");
+ if (irq < 0)
return irq;
- }
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
ab8500_usb_disconnect_irq,
IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
@@ -744,10 +746,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) {
irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "VBUS fall irq not found\n");
+ if (irq < 0)
return irq;
- }
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
ab8500_usb_disconnect_irq,
IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index f7c96d209eda..b451f4695f3f 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -65,7 +65,7 @@ struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
static struct list_head active_timers;
-static struct fsl_otg_config fsl_otg_initdata = {
+static const struct fsl_otg_config fsl_otg_initdata = {
.otg_port = 1,
};
@@ -1043,6 +1043,11 @@ static ssize_t show_fsl_usb2_otg_state(struct device *dev,
static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
+static struct attribute *fsl_otg_attrs[] = {
+ &dev_attr_fsl_usb2_otg_state.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(fsl_otg);
/* Char driver interface to control some OTG input */
@@ -1132,10 +1137,6 @@ static int fsl_otg_probe(struct platform_device *pdev)
return ret;
}
- ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
- if (ret)
- dev_warn(&pdev->dev, "Can't register sysfs attribute\n");
-
return ret;
}
@@ -1152,8 +1153,6 @@ static int fsl_otg_remove(struct platform_device *pdev)
kfree(fsl_otg_dev->phy.otg);
kfree(fsl_otg_dev);
- device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
-
unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
if (pdata->exit)
@@ -1168,6 +1167,7 @@ struct platform_driver fsl_otg_driver = {
.driver = {
.name = driver_name,
.owner = THIS_MODULE,
+ .dev_groups = fsl_otg_groups,
},
};
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index cf7ecdc9a9d4..06b47f1028b3 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -641,12 +641,15 @@ static const struct attribute_group inputs_attr_group = {
.attrs = inputs_attrs,
};
+static const struct attribute_group *mv_otg_groups[] = {
+ &inputs_attr_group,
+ NULL,
+};
+
static int mv_otg_remove(struct platform_device *pdev)
{
struct mv_otg *mvotg = platform_get_drvdata(pdev);
- sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group);
-
if (mvotg->qwork) {
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
@@ -809,13 +812,6 @@ static int mv_otg_probe(struct platform_device *pdev)
goto err_disable_clk;
}
- retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group);
- if (retval < 0) {
- dev_dbg(&pdev->dev,
- "Can't register sysfs attr group: %d\n", retval);
- goto err_remove_phy;
- }
-
spin_lock_init(&mvotg->wq_lock);
if (spin_trylock(&mvotg->wq_lock)) {
mv_otg_run_state_machine(mvotg, 2 * HZ);
@@ -828,8 +824,6 @@ static int mv_otg_probe(struct platform_device *pdev)
return 0;
-err_remove_phy:
- usb_remove_phy(&mvotg->phy);
err_disable_clk:
mv_otg_disable_internal(mvotg);
err_destroy_workqueue:
@@ -883,6 +877,7 @@ static struct platform_driver mv_otg_driver = {
.remove = mv_otg_remove,
.driver = {
.name = driver_name,
+ .dev_groups = mv_otg_groups,
},
#ifdef CONFIG_PM
.suspend = mv_otg_suspend,
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index 0981abc3d1ad..baebb1f5a973 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -312,15 +312,12 @@ static ssize_t otg_mode_store(struct device *device,
}
static DEVICE_ATTR_RW(otg_mode);
-static struct attribute *tahvo_attributes[] = {
+static struct attribute *tahvo_attrs[] = {
&dev_attr_vbus.attr,
&dev_attr_otg_mode.attr,
NULL
};
-
-static const struct attribute_group tahvo_attr_group = {
- .attrs = tahvo_attributes,
-};
+ATTRIBUTE_GROUPS(tahvo);
static int tahvo_usb_probe(struct platform_device *pdev)
{
@@ -406,17 +403,8 @@ static int tahvo_usb_probe(struct platform_device *pdev)
goto err_remove_phy;
}
- /* Attributes */
- ret = sysfs_create_group(&pdev->dev.kobj, &tahvo_attr_group);
- if (ret) {
- dev_err(&pdev->dev, "cannot create sysfs group: %d\n", ret);
- goto err_free_irq;
- }
-
return 0;
-err_free_irq:
- free_irq(tu->irq, tu);
err_remove_phy:
usb_remove_phy(&tu->phy);
err_disable_clk:
@@ -430,7 +418,6 @@ static int tahvo_usb_remove(struct platform_device *pdev)
{
struct tahvo_usb *tu = platform_get_drvdata(pdev);
- sysfs_remove_group(&pdev->dev.kobj, &tahvo_attr_group);
free_irq(tu->irq, tu);
usb_remove_phy(&tu->phy);
if (!IS_ERR(tu->ick))
@@ -444,6 +431,7 @@ static struct platform_driver tahvo_usb_driver = {
.remove = tahvo_usb_remove,
.driver = {
.name = "tahvo-usb",
+ .dev_groups = tahvo_groups,
},
};
module_platform_driver(tahvo_usb_driver);
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index dade34d70419..bfebf1f2e991 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -196,6 +196,12 @@ static ssize_t vbus_show(struct device *dev,
}
static DEVICE_ATTR_RO(vbus);
+static struct attribute *twl6030_attrs[] = {
+ &dev_attr_vbus.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(twl6030);
+
static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
{
struct twl6030_usb *twl = _twl;
@@ -361,8 +367,6 @@ static int twl6030_usb_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, twl);
- if (device_create_file(&pdev->dev, &dev_attr_vbus))
- dev_warn(&pdev->dev, "could not create sysfs file\n");
INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work);
@@ -373,7 +377,6 @@ static int twl6030_usb_probe(struct platform_device *pdev)
if (status < 0) {
dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
twl->irq1, status);
- device_remove_file(twl->dev, &dev_attr_vbus);
return status;
}
@@ -384,7 +387,6 @@ static int twl6030_usb_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
twl->irq2, status);
free_irq(twl->irq1, twl);
- device_remove_file(twl->dev, &dev_attr_vbus);
return status;
}
@@ -408,7 +410,6 @@ static int twl6030_usb_remove(struct platform_device *pdev)
free_irq(twl->irq1, twl);
free_irq(twl->irq2, twl);
regulator_put(twl->usb3v3);
- device_remove_file(twl->dev, &dev_attr_vbus);
cancel_work_sync(&twl->set_vbus_work);
return 0;
@@ -426,6 +427,7 @@ static struct platform_driver twl6030_usb_driver = {
.driver = {
.name = "twl6030_usb",
.of_match_table = of_match_ptr(twl6030_usb_id_table),
+ .dev_groups = twl6030_groups,
},
};
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index ddd3be48f948..ae54221011c3 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1283,7 +1283,7 @@ static const struct hc_driver usbhsh_driver = {
/*
* generic hardware linkage
*/
- .flags = HCD_USB2,
+ .flags = HCD_DMA | HCD_USB2,
.start = usbhsh_host_start,
.stop = usbhsh_host_stop,
diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index 0526efbc4922..94b4e7db2b94 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -102,6 +102,19 @@ static void *usb_role_switch_match(struct device_connection *con, int ep,
return dev ? to_role_switch(dev) : ERR_PTR(-EPROBE_DEFER);
}
+static struct usb_role_switch *
+usb_role_switch_is_parent(struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *parent = fwnode_get_parent(fwnode);
+ struct device *dev;
+
+ if (!parent || !fwnode_property_present(parent, "usb-role-switch"))
+ return NULL;
+
+ dev = class_find_device_by_fwnode(role_class, parent);
+ return dev ? to_role_switch(dev) : ERR_PTR(-EPROBE_DEFER);
+}
+
/**
* usb_role_switch_get - Find USB role switch linked with the caller
* @dev: The caller device
@@ -113,8 +126,10 @@ struct usb_role_switch *usb_role_switch_get(struct device *dev)
{
struct usb_role_switch *sw;
- sw = device_connection_find_match(dev, "usb-role-switch", NULL,
- usb_role_switch_match);
+ sw = usb_role_switch_is_parent(dev_fwnode(dev));
+ if (!sw)
+ sw = device_connection_find_match(dev, "usb-role-switch", NULL,
+ usb_role_switch_match);
if (!IS_ERR_OR_NULL(sw))
WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
@@ -124,6 +139,28 @@ struct usb_role_switch *usb_role_switch_get(struct device *dev)
EXPORT_SYMBOL_GPL(usb_role_switch_get);
/**
+ * fwnode_usb_role_switch_get - Find USB role switch linked with the caller
+ * @fwnode: The caller device node
+ *
+ * This is similar to the usb_role_switch_get() function above, but it searches
+ * the switch using fwnode instead of device entry.
+ */
+struct usb_role_switch *fwnode_usb_role_switch_get(struct fwnode_handle *fwnode)
+{
+ struct usb_role_switch *sw;
+
+ sw = usb_role_switch_is_parent(fwnode);
+ if (!sw)
+ sw = fwnode_connection_find_match(fwnode, "usb-role-switch",
+ NULL, usb_role_switch_match);
+ if (!IS_ERR_OR_NULL(sw))
+ WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
+
+ return sw;
+}
+EXPORT_SYMBOL_GPL(fwnode_usb_role_switch_get);
+
+/**
* usb_role_switch_put - Release handle to a switch
* @sw: USB Role Switch
*
diff --git a/drivers/usb/roles/intel-xhci-usb-role-switch.c b/drivers/usb/roles/intel-xhci-usb-role-switch.c
index 7325a84dd1c8..409851306e99 100644
--- a/drivers/usb/roles/intel-xhci-usb-role-switch.c
+++ b/drivers/usb/roles/intel-xhci-usb-role-switch.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/usb/role.h>
/* register definition */
@@ -26,6 +27,12 @@
#define SW_VBUS_VALID BIT(24)
#define SW_IDPIN_EN BIT(21)
#define SW_IDPIN BIT(20)
+#define SW_SWITCH_EN BIT(16)
+
+#define DRD_CONFIG_DYNAMIC 0
+#define DRD_CONFIG_STATIC_HOST 1
+#define DRD_CONFIG_STATIC_DEVICE 2
+#define DRD_CONFIG_MASK 3
#define DUAL_ROLE_CFG1 0x6c
#define HOST_MODE BIT(29)
@@ -37,6 +44,7 @@
struct intel_xhci_usb_data {
struct usb_role_switch *role_sw;
void __iomem *base;
+ bool enable_sw_switch;
};
static const struct software_node intel_xhci_usb_node = {
@@ -49,6 +57,7 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role)
unsigned long timeout;
acpi_status status;
u32 glk, val;
+ u32 drd_config = DRD_CONFIG_DYNAMIC;
/*
* On many CHT devices ACPI event (_AEI) handlers read / modify /
@@ -63,24 +72,35 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role)
pm_runtime_get_sync(dev);
- /* Set idpin value as requested */
+ /*
+ * Set idpin value as requested.
+ * Since some devices rely on firmware setting DRD_CONFIG and
+ * SW_SWITCH_EN bits to be zero for role switch,
+ * do not set these bits for those devices.
+ */
val = readl(data->base + DUAL_ROLE_CFG0);
switch (role) {
case USB_ROLE_NONE:
val |= SW_IDPIN;
val &= ~SW_VBUS_VALID;
+ drd_config = DRD_CONFIG_DYNAMIC;
break;
case USB_ROLE_HOST:
val &= ~SW_IDPIN;
val &= ~SW_VBUS_VALID;
+ drd_config = DRD_CONFIG_STATIC_HOST;
break;
case USB_ROLE_DEVICE:
val |= SW_IDPIN;
val |= SW_VBUS_VALID;
+ drd_config = DRD_CONFIG_STATIC_DEVICE;
break;
}
val |= SW_IDPIN_EN;
-
+ if (data->enable_sw_switch) {
+ val &= ~DRD_CONFIG_MASK;
+ val |= SW_SWITCH_EN | drd_config;
+ }
writel(val, data->base + DUAL_ROLE_CFG0);
acpi_release_global_lock(glk);
@@ -156,6 +176,9 @@ static int intel_xhci_usb_probe(struct platform_device *pdev)
sw_desc.allow_userspace_control = true,
sw_desc.fwnode = software_node_fwnode(&intel_xhci_usb_node);
+ data->enable_sw_switch = !device_property_read_bool(dev,
+ "sw_switch_disable");
+
data->role_sw = usb_role_switch_register(dev, &sw_desc);
if (IS_ERR(data->role_sw)) {
fwnode_handle_put(sw_desc.fwnode);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4b3a049561f3..f0688c44b04c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2023,6 +2023,46 @@ static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr,
return 0;
}
+static int ftdi_gpio_init_ft232h(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ u16 cbus_config;
+ u8 *buf;
+ int ret;
+ int i;
+
+ buf = kmalloc(4, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = ftdi_read_eeprom(port->serial, buf, 0x1a, 4);
+ if (ret < 0)
+ goto out_free;
+
+ /*
+ * FT232H CBUS Memory Map
+ *
+ * 0x1a: X- (upper nibble -> AC5)
+ * 0x1b: -X (lower nibble -> AC6)
+ * 0x1c: XX (upper nibble -> AC9 | lower nibble -> AC8)
+ */
+ cbus_config = buf[2] << 8 | (buf[1] & 0xf) << 4 | (buf[0] & 0xf0) >> 4;
+
+ priv->gc.ngpio = 4;
+ priv->gpio_altfunc = 0xff;
+
+ for (i = 0; i < priv->gc.ngpio; ++i) {
+ if ((cbus_config & 0xf) == FTDI_FTX_CBUS_MUX_GPIO)
+ priv->gpio_altfunc &= ~BIT(i);
+ cbus_config >>= 4;
+ }
+
+out_free:
+ kfree(buf);
+
+ return ret;
+}
+
static int ftdi_gpio_init_ft232r(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -2098,6 +2138,9 @@ static int ftdi_gpio_init(struct usb_serial_port *port)
int result;
switch (priv->chip_type) {
+ case FT232H:
+ result = ftdi_gpio_init_ft232h(port);
+ break;
case FT232RL:
result = ftdi_gpio_init_ft232r(port);
break;
diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h
index 6d64f342f587..16ce06039a4d 100644
--- a/drivers/usb/storage/debug.h
+++ b/drivers/usb/storage/debug.h
@@ -29,8 +29,6 @@
#include <linux/kernel.h>
-#define USB_STORAGE "usb-storage: "
-
#ifdef CONFIG_USB_STORAGE_DEBUG
void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb);
void usb_stor_show_sense(const struct us_data *us, unsigned char key,
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 2b474d60b4db..28e1128d53a4 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1511,7 +1511,7 @@ static int isd200_Initialization(struct us_data *us)
static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us)
{
- int sendToTransport = 1, orig_bufflen;
+ int sendToTransport, orig_bufflen;
union ata_cdb ataCdb;
/* Make sure driver was initialized */
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 05b80211290d..6737fab94959 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -40,6 +40,7 @@
#include <scsi/scsi_eh.h>
#include "usb.h"
+#include <linux/usb/hcd.h>
#include "scsiglue.h"
#include "debug.h"
#include "transport.h"
@@ -141,11 +142,10 @@ static int slave_configure(struct scsi_device *sdev)
/*
* Some USB host controllers can't do DMA; they have to use PIO.
- * They indicate this by setting their dma_mask to NULL. For
- * such controllers we need to make sure the block layer sets
+ * For such controllers we need to make sure the block layer sets
* up bounce buffers in addressable memory.
*/
- if (!us->pusb_dev->bus->controller->dma_mask)
+ if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)))
blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
/*
@@ -379,7 +379,7 @@ static int queuecommand_lck(struct scsi_cmnd *srb,
/* check for state-transition errors */
if (us->srb != NULL) {
- printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
+ printk(KERN_ERR "usb-storage: Error in %s: us->srb = %p\n",
__func__, us->srb);
return SCSI_MLQUEUE_HOST_BUSY;
}
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 89d9193bd1cf..895e2418de53 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -53,6 +53,7 @@ source "drivers/usb/typec/ucsi/Kconfig"
config TYPEC_TPS6598X
tristate "TI TPS6598x USB Power Delivery controller driver"
depends on I2C
+ select REGMAP_I2C
help
Say Y or M here if your system has TI TPS65982 or TPS65983 USB Power
Delivery controller.
diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index 61b7bc58dd81..57907f26f681 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -215,7 +215,7 @@ static void *typec_mux_match(struct device_connection *con, int ep, void *data)
}
/* Alternate Mode muxes */
- nval = fwnode_property_read_u16_array(con->fwnode, "svid", NULL, 0);
+ nval = fwnode_property_count_u16(con->fwnode, "svid");
if (nval <= 0)
return NULL;
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index c524088246ee..ed8655c6af8c 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/usb.h>
#include <linux/usb/typec.h>
#include <linux/usb/tcpm.h>
#include <linux/usb/pd.h>
@@ -75,7 +76,6 @@ struct fusb302_chip {
struct i2c_client *i2c_client;
struct tcpm_port *tcpm_port;
struct tcpc_dev tcpc_dev;
- struct tcpc_config tcpc_config;
struct regulator *vbus;
@@ -207,23 +207,19 @@ static int fusb302_debug_show(struct seq_file *s, void *v)
}
DEFINE_SHOW_ATTRIBUTE(fusb302_debug);
-static struct dentry *rootdir;
-
static void fusb302_debugfs_init(struct fusb302_chip *chip)
{
- mutex_init(&chip->logbuffer_lock);
- if (!rootdir)
- rootdir = debugfs_create_dir("fusb302", NULL);
+ char name[NAME_MAX];
- chip->dentry = debugfs_create_file(dev_name(chip->dev),
- S_IFREG | 0444, rootdir,
+ mutex_init(&chip->logbuffer_lock);
+ snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev));
+ chip->dentry = debugfs_create_file(name, S_IFREG | 0444, usb_debug_root,
chip, &fusb302_debug_fops);
}
static void fusb302_debugfs_exit(struct fusb302_chip *chip)
{
debugfs_remove(chip->dentry);
- debugfs_remove(rootdir);
}
#else
@@ -1110,23 +1106,6 @@ done:
mutex_unlock(&chip->lock);
}
-#define PDO_FIXED_FLAGS \
- (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
-
-static const u32 src_pdo[] = {
- PDO_FIXED(5000, 400, PDO_FIXED_FLAGS),
-};
-
-static const struct tcpc_config fusb302_tcpc_config = {
- .src_pdo = src_pdo,
- .nr_src_pdo = ARRAY_SIZE(src_pdo),
- .operating_snk_mw = 2500,
- .type = TYPEC_PORT_DRP,
- .data = TYPEC_PORT_DRD,
- .default_role = TYPEC_SINK,
- .alt_modes = NULL,
-};
-
static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev)
{
fusb302_tcpc_dev->init = tcpm_init;
@@ -1670,27 +1649,36 @@ static int init_gpio(struct fusb302_chip *chip)
return 0;
}
-static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip)
-{
- struct device *dev = chip->dev;
- u32 max_uv, max_ua;
+#define PDO_FIXED_FLAGS \
+ (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
- chip->snk_pdo[0] = PDO_FIXED(5000, 400, PDO_FIXED_FLAGS);
+static const u32 src_pdo[] = {
+ PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
+};
- /*
- * As max_snk_ma/mv/mw is not needed for tcpc_config,
- * those settings should be passed in via sink PDO, so
- * "fcs, max-sink-*" properties will be deprecated, to
- * perserve compatibility with existing users of them,
- * we read those properties to convert them to be a var
- * PDO.
- */
- if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &max_uv) ||
- device_property_read_u32(dev, "fcs,max-sink-microamp", &max_ua))
- return 1;
+static const u32 snk_pdo[] = {
+ PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
+};
+
+static const struct property_entry port_props[] = {
+ PROPERTY_ENTRY_STRING("data-role", "dual"),
+ PROPERTY_ENTRY_STRING("power-role", "dual"),
+ PROPERTY_ENTRY_STRING("try-power-role", "sink"),
+ PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
+ PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
+ PROPERTY_ENTRY_U32("op-sink-microwatt", 2500),
+ { }
+};
- chip->snk_pdo[1] = PDO_VAR(5000, max_uv / 1000, max_ua / 1000);
- return 2;
+static struct fwnode_handle *fusb302_fwnode_get(struct device *dev)
+{
+ struct fwnode_handle *fwnode;
+
+ fwnode = device_get_named_child_node(dev, "connector");
+ if (!fwnode)
+ fwnode = fwnode_create_software_node(port_props, NULL);
+
+ return fwnode;
}
static int fusb302_probe(struct i2c_client *client,
@@ -1701,7 +1689,6 @@ static int fusb302_probe(struct i2c_client *client,
struct device *dev = &client->dev;
const char *name;
int ret = 0;
- u32 v;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
dev_err(&client->dev,
@@ -1714,20 +1701,8 @@ static int fusb302_probe(struct i2c_client *client,
chip->i2c_client = client;
chip->dev = &client->dev;
- chip->tcpc_config = fusb302_tcpc_config;
- chip->tcpc_dev.config = &chip->tcpc_config;
mutex_init(&chip->lock);
- chip->tcpc_dev.fwnode =
- device_get_named_child_node(dev, "connector");
-
- if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v))
- chip->tcpc_config.operating_snk_mw = v / 1000;
-
- /* Composite sink PDO */
- chip->tcpc_config.nr_snk_pdo = fusb302_composite_snk_pdo_array(chip);
- chip->tcpc_config.snk_pdo = chip->snk_pdo;
-
/*
* Devicetree platforms should get extcon via phandle (not yet
* supported). On ACPI platforms, we get the name from a device prop.
@@ -1753,6 +1728,7 @@ static int fusb302_probe(struct i2c_client *client,
INIT_WORK(&chip->irq_work, fusb302_irq_work);
INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work);
init_tcpc_dev(&chip->tcpc_dev);
+ fusb302_debugfs_init(chip);
if (client->irq) {
chip->gpio_int_n_irq = client->irq;
@@ -1762,8 +1738,15 @@ static int fusb302_probe(struct i2c_client *client,
goto destroy_workqueue;
}
+ chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev);
+ if (IS_ERR(chip->tcpc_dev.fwnode)) {
+ ret = PTR_ERR(chip->tcpc_dev.fwnode);
+ goto destroy_workqueue;
+ }
+
chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
if (IS_ERR(chip->tcpm_port)) {
+ fwnode_handle_put(chip->tcpc_dev.fwnode);
ret = PTR_ERR(chip->tcpm_port);
if (ret != -EPROBE_DEFER)
dev_err(dev, "cannot register tcpm port, ret=%d", ret);
@@ -1778,14 +1761,15 @@ static int fusb302_probe(struct i2c_client *client,
goto tcpm_unregister_port;
}
enable_irq_wake(chip->gpio_int_n_irq);
- fusb302_debugfs_init(chip);
i2c_set_clientdata(client, chip);
return ret;
tcpm_unregister_port:
tcpm_unregister_port(chip->tcpm_port);
+ fwnode_handle_put(chip->tcpc_dev.fwnode);
destroy_workqueue:
+ fusb302_debugfs_exit(chip);
destroy_workqueue(chip->wq);
return ret;
@@ -1800,6 +1784,7 @@ static int fusb302_remove(struct i2c_client *client)
cancel_work_sync(&chip->irq_work);
cancel_delayed_work_sync(&chip->bc_lvl_handler);
tcpm_unregister_port(chip->tcpm_port);
+ fwnode_handle_put(chip->tcpc_dev.fwnode);
destroy_workqueue(chip->wq);
fusb302_debugfs_exit(chip);
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index bcfdb55fd198..96562744101c 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -19,6 +19,7 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
+#include <linux/usb.h>
#include <linux/usb/pd.h>
#include <linux/usb/pd_ado.h>
#include <linux/usb/pd_bdo.h>
@@ -571,17 +572,13 @@ static int tcpm_debug_show(struct seq_file *s, void *v)
}
DEFINE_SHOW_ATTRIBUTE(tcpm_debug);
-static struct dentry *rootdir;
-
static void tcpm_debugfs_init(struct tcpm_port *port)
{
- mutex_init(&port->logbuffer_lock);
- /* /sys/kernel/debug/tcpm/usbcX */
- if (!rootdir)
- rootdir = debugfs_create_dir("tcpm", NULL);
+ char name[NAME_MAX];
- port->dentry = debugfs_create_file(dev_name(port->dev),
- S_IFREG | 0444, rootdir,
+ mutex_init(&port->logbuffer_lock);
+ snprintf(name, NAME_MAX, "tcpm-%s", dev_name(port->dev));
+ port->dentry = debugfs_create_file(name, S_IFREG | 0444, usb_debug_root,
port, &tcpm_debug_fops);
}
@@ -597,10 +594,6 @@ static void tcpm_debugfs_exit(struct tcpm_port *port)
mutex_unlock(&port->logbuffer_lock);
debugfs_remove(port->dentry);
- if (list_empty(&rootdir->d_subdirs)) {
- debugfs_remove(rootdir);
- rootdir = NULL;
- }
}
#else
@@ -4434,8 +4427,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
goto sink;
/* Get source pdos */
- ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
- NULL, 0);
+ ret = fwnode_property_count_u32(fwnode, "source-pdos");
if (ret <= 0)
return -EINVAL;
@@ -4459,8 +4451,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
return -EINVAL;
sink:
/* Get sink pdos */
- ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
- NULL, 0);
+ ret = fwnode_property_count_u32(fwnode, "sink-pdos");
if (ret <= 0)
return -EINVAL;
diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c
index 6b317c150bdd..edc271da14f4 100644
--- a/drivers/usb/typec/tcpm/wcove.c
+++ b/drivers/usb/typec/tcpm/wcove.c
@@ -617,10 +617,8 @@ static int wcove_typec_probe(struct platform_device *pdev)
wcove->regmap = pmic->regmap;
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+ if (irq < 0)
return irq;
- }
irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr, irq);
if (irq < 0)
diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c
index 8e9f8fba55af..907e20e1a71e 100644
--- a/drivers/usb/typec/ucsi/ucsi_ccg.c
+++ b/drivers/usb/typec/ucsi/ucsi_ccg.c
@@ -1104,14 +1104,11 @@ static ssize_t do_flash_store(struct device *dev,
static DEVICE_ATTR_WO(do_flash);
-static struct attribute *ucsi_ccg_sysfs_attrs[] = {
+static struct attribute *ucsi_ccg_attrs[] = {
&dev_attr_do_flash.attr,
NULL,
};
-
-static struct attribute_group ucsi_ccg_attr_group = {
- .attrs = ucsi_ccg_sysfs_attrs,
-};
+ATTRIBUTE_GROUPS(ucsi_ccg);
static int ucsi_ccg_probe(struct i2c_client *client,
const struct i2c_device_id *id)
@@ -1189,10 +1186,6 @@ static int ucsi_ccg_probe(struct i2c_client *client,
i2c_set_clientdata(client, uc);
- status = sysfs_create_group(&uc->dev->kobj, &ucsi_ccg_attr_group);
- if (status)
- dev_err(uc->dev, "cannot create sysfs group: %d\n", status);
-
pm_runtime_set_active(uc->dev);
pm_runtime_enable(uc->dev);
pm_runtime_idle(uc->dev);
@@ -1209,7 +1202,6 @@ static int ucsi_ccg_remove(struct i2c_client *client)
ucsi_unregister_ppm(uc->ucsi);
pm_runtime_disable(uc->dev);
free_irq(uc->irq, uc);
- sysfs_remove_group(&uc->dev->kobj, &ucsi_ccg_attr_group);
return 0;
}
@@ -1270,6 +1262,7 @@ static struct i2c_driver ucsi_ccg_driver = {
.driver = {
.name = "ucsi_ccg",
.pm = &ucsi_ccg_pm,
+ .dev_groups = ucsi_ccg_groups,
},
.probe = ucsi_ccg_probe,
.remove = ucsi_ccg_remove,
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index f101347e3ea3..c31d17d05810 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -35,9 +35,11 @@ MODULE_DEVICE_TABLE(usb, skel_table);
/* our private defines. if this grows any larger, use your own .h file */
#define MAX_TRANSFER (PAGE_SIZE - 512)
-/* MAX_TRANSFER is chosen so that the VM is not stressed by
- allocations > PAGE_SIZE and the number of packets in a page
- is an integer 512 is the largest possible packet on EHCI */
+/*
+ * MAX_TRANSFER is chosen so that the VM is not stressed by
+ * allocations > PAGE_SIZE and the number of packets in a page
+ * is an integer 512 is the largest possible packet on EHCI
+ */
#define WRITES_IN_FLIGHT 8
/* arbitrarily chosen */
diff --git a/drivers/usb/usbip/stub.h b/drivers/usb/usbip/stub.h
index 35618ceb2791..d11270560c24 100644
--- a/drivers/usb/usbip/stub.h
+++ b/drivers/usb/usbip/stub.h
@@ -52,7 +52,11 @@ struct stub_priv {
unsigned long seqnum;
struct list_head list;
struct stub_device *sdev;
- struct urb *urb;
+ struct urb **urbs;
+ struct scatterlist *sgl;
+ int num_urbs;
+ int completed_urbs;
+ int urb_status;
int unlinking;
};
@@ -86,6 +90,7 @@ extern struct usb_device_driver stub_driver;
struct bus_id_priv *get_busid_priv(const char *busid);
void put_busid_priv(struct bus_id_priv *bid);
int del_match_busid(char *busid);
+void stub_free_priv_and_urb(struct stub_priv *priv);
void stub_device_cleanup_urbs(struct stub_device *sdev);
/* stub_rx.c */
diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c
index 7931e6cecc70..2305d425e6c9 100644
--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -106,38 +106,13 @@ err:
}
static DEVICE_ATTR_WO(usbip_sockfd);
-static int stub_add_files(struct device *dev)
-{
- int err = 0;
-
- err = device_create_file(dev, &dev_attr_usbip_status);
- if (err)
- goto err_status;
-
- err = device_create_file(dev, &dev_attr_usbip_sockfd);
- if (err)
- goto err_sockfd;
-
- err = device_create_file(dev, &dev_attr_usbip_debug);
- if (err)
- goto err_debug;
-
- return 0;
-
-err_debug:
- device_remove_file(dev, &dev_attr_usbip_sockfd);
-err_sockfd:
- device_remove_file(dev, &dev_attr_usbip_status);
-err_status:
- return err;
-}
-
-static void stub_remove_files(struct device *dev)
-{
- device_remove_file(dev, &dev_attr_usbip_status);
- device_remove_file(dev, &dev_attr_usbip_sockfd);
- device_remove_file(dev, &dev_attr_usbip_debug);
-}
+static struct attribute *usbip_attrs[] = {
+ &dev_attr_usbip_status.attr,
+ &dev_attr_usbip_sockfd.attr,
+ &dev_attr_usbip_debug.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(usbip);
static void stub_shutdown_connection(struct usbip_device *ud)
{
@@ -379,17 +354,8 @@ static int stub_probe(struct usb_device *udev)
goto err_port;
}
- rc = stub_add_files(&udev->dev);
- if (rc) {
- dev_err(&udev->dev, "stub_add_files for %s\n", udev_busid);
- goto err_files;
- }
-
return 0;
-err_files:
- usb_hub_release_port(udev->parent, udev->portnum,
- (struct usb_dev_state *) udev);
err_port:
dev_set_drvdata(&udev->dev, NULL);
usb_put_dev(udev);
@@ -457,7 +423,6 @@ static void stub_disconnect(struct usb_device *udev)
/*
* NOTE: rx/tx threads are invoked for each usb_device.
*/
- stub_remove_files(&udev->dev);
/* release port */
rc = usb_hub_release_port(udev->parent, udev->portnum,
@@ -526,4 +491,5 @@ struct usb_device_driver stub_driver = {
.resume = stub_resume,
#endif
.supports_autosuspend = 0,
+ .dev_groups = usbip_groups,
};
diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c
index 2e4bfccd4bfc..c1c0bbc9f8b1 100644
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -6,6 +6,7 @@
#include <linux/string.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
@@ -281,13 +282,49 @@ static struct stub_priv *stub_priv_pop_from_listhead(struct list_head *listhead)
struct stub_priv *priv, *tmp;
list_for_each_entry_safe(priv, tmp, listhead, list) {
- list_del(&priv->list);
+ list_del_init(&priv->list);
return priv;
}
return NULL;
}
+void stub_free_priv_and_urb(struct stub_priv *priv)
+{
+ struct urb *urb;
+ int i;
+
+ for (i = 0; i < priv->num_urbs; i++) {
+ urb = priv->urbs[i];
+
+ if (!urb)
+ return;
+
+ kfree(urb->setup_packet);
+ urb->setup_packet = NULL;
+
+
+ if (urb->transfer_buffer && !priv->sgl) {
+ kfree(urb->transfer_buffer);
+ urb->transfer_buffer = NULL;
+ }
+
+ if (urb->num_sgs) {
+ sgl_free(urb->sg);
+ urb->sg = NULL;
+ urb->num_sgs = 0;
+ }
+
+ usb_free_urb(urb);
+ }
+ if (!list_empty(&priv->list))
+ list_del(&priv->list);
+ if (priv->sgl)
+ sgl_free(priv->sgl);
+ kfree(priv->urbs);
+ kmem_cache_free(stub_priv_cache, priv);
+}
+
static struct stub_priv *stub_priv_pop(struct stub_device *sdev)
{
unsigned long flags;
@@ -314,25 +351,15 @@ done:
void stub_device_cleanup_urbs(struct stub_device *sdev)
{
struct stub_priv *priv;
- struct urb *urb;
+ int i;
dev_dbg(&sdev->udev->dev, "Stub device cleaning up urbs\n");
while ((priv = stub_priv_pop(sdev))) {
- urb = priv->urb;
- dev_dbg(&sdev->udev->dev, "free urb seqnum %lu\n",
- priv->seqnum);
- usb_kill_urb(urb);
-
- kmem_cache_free(stub_priv_cache, priv);
+ for (i = 0; i < priv->num_urbs; i++)
+ usb_kill_urb(priv->urbs[i]);
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = NULL;
-
- kfree(urb->setup_packet);
- urb->setup_packet = NULL;
-
- usb_free_urb(urb);
+ stub_free_priv_and_urb(priv);
}
}
diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
index b0a855acafa3..66edfeea68fe 100644
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -7,6 +7,7 @@
#include <linux/kthread.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
@@ -201,7 +202,7 @@ static void tweak_special_requests(struct urb *urb)
static int stub_recv_cmd_unlink(struct stub_device *sdev,
struct usbip_header *pdu)
{
- int ret;
+ int ret, i;
unsigned long flags;
struct stub_priv *priv;
@@ -246,12 +247,14 @@ static int stub_recv_cmd_unlink(struct stub_device *sdev,
* so a driver in a client host will know the failure
* of the unlink request ?
*/
- ret = usb_unlink_urb(priv->urb);
- if (ret != -EINPROGRESS)
- dev_err(&priv->urb->dev->dev,
- "failed to unlink a urb # %lu, ret %d\n",
- priv->seqnum, ret);
-
+ for (i = priv->completed_urbs; i < priv->num_urbs; i++) {
+ ret = usb_unlink_urb(priv->urbs[i]);
+ if (ret != -EINPROGRESS)
+ dev_err(&priv->urbs[i]->dev->dev,
+ "failed to unlink %d/%d urb of seqnum %lu, ret %d\n",
+ i + 1, priv->num_urbs,
+ priv->seqnum, ret);
+ }
return 0;
}
@@ -433,14 +436,36 @@ static void masking_bogus_flags(struct urb *urb)
urb->transfer_flags &= allowed;
}
+static int stub_recv_xbuff(struct usbip_device *ud, struct stub_priv *priv)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < priv->num_urbs; i++) {
+ ret = usbip_recv_xbuff(ud, priv->urbs[i]);
+ if (ret < 0)
+ break;
+ }
+
+ return ret;
+}
+
static void stub_recv_cmd_submit(struct stub_device *sdev,
struct usbip_header *pdu)
{
- int ret;
struct stub_priv *priv;
struct usbip_device *ud = &sdev->ud;
struct usb_device *udev = sdev->udev;
+ struct scatterlist *sgl = NULL, *sg;
+ void *buffer = NULL;
+ unsigned long long buf_len;
+ int nents;
+ int num_urbs = 1;
int pipe = get_pipe(sdev, pdu);
+ int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG;
+ int support_sg = 1;
+ int np = 0;
+ int ret, i;
if (pipe == -1)
return;
@@ -449,76 +474,139 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
if (!priv)
return;
- /* setup a urb */
- if (usb_pipeisoc(pipe))
- priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
- GFP_KERNEL);
- else
- priv->urb = usb_alloc_urb(0, GFP_KERNEL);
+ buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
- if (!priv->urb) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
- return;
+ /* allocate urb transfer buffer, if needed */
+ if (buf_len) {
+ if (use_sg) {
+ sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
+ if (!sgl)
+ goto err_malloc;
+ } else {
+ buffer = kzalloc(buf_len, GFP_KERNEL);
+ if (!buffer)
+ goto err_malloc;
+ }
}
- /* allocate urb transfer buffer, if needed */
- if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
- priv->urb->transfer_buffer =
- kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
- GFP_KERNEL);
- if (!priv->urb->transfer_buffer) {
+ /* Check if the server's HCD supports SG */
+ if (use_sg && !udev->bus->sg_tablesize) {
+ /*
+ * If the server's HCD doesn't support SG, break a single SG
+ * request into several URBs and map each SG list entry to
+ * corresponding URB buffer. The previously allocated SG
+ * list is stored in priv->sgl (If the server's HCD support SG,
+ * SG list is stored only in urb->sg) and it is used as an
+ * indicator that the server split single SG request into
+ * several URBs. Later, priv->sgl is used by stub_complete() and
+ * stub_send_ret_submit() to reassemble the divied URBs.
+ */
+ support_sg = 0;
+ num_urbs = nents;
+ priv->completed_urbs = 0;
+ pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG;
+ }
+
+ /* allocate urb array */
+ priv->num_urbs = num_urbs;
+ priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
+ if (!priv->urbs)
+ goto err_urbs;
+
+ /* setup a urb */
+ if (support_sg) {
+ if (usb_pipeisoc(pipe))
+ np = pdu->u.cmd_submit.number_of_packets;
+
+ priv->urbs[0] = usb_alloc_urb(np, GFP_KERNEL);
+ if (!priv->urbs[0])
+ goto err_urb;
+
+ if (buf_len) {
+ if (use_sg) {
+ priv->urbs[0]->sg = sgl;
+ priv->urbs[0]->num_sgs = nents;
+ priv->urbs[0]->transfer_buffer = NULL;
+ } else {
+ priv->urbs[0]->transfer_buffer = buffer;
+ }
+ }
+
+ /* copy urb setup packet */
+ priv->urbs[0]->setup_packet = kmemdup(&pdu->u.cmd_submit.setup,
+ 8, GFP_KERNEL);
+ if (!priv->urbs[0]->setup_packet) {
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return;
}
- }
- /* copy urb setup packet */
- priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
- GFP_KERNEL);
- if (!priv->urb->setup_packet) {
- dev_err(&udev->dev, "allocate setup_packet\n");
- usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
- return;
+ usbip_pack_pdu(pdu, priv->urbs[0], USBIP_CMD_SUBMIT, 0);
+ } else {
+ for_each_sg(sgl, sg, nents, i) {
+ priv->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+ /* The URBs which is previously allocated will be freed
+ * in stub_device_cleanup_urbs() if error occurs.
+ */
+ if (!priv->urbs[i])
+ goto err_urb;
+
+ usbip_pack_pdu(pdu, priv->urbs[i], USBIP_CMD_SUBMIT, 0);
+ priv->urbs[i]->transfer_buffer = sg_virt(sg);
+ priv->urbs[i]->transfer_buffer_length = sg->length;
+ }
+ priv->sgl = sgl;
}
- /* set other members from the base header of pdu */
- priv->urb->context = (void *) priv;
- priv->urb->dev = udev;
- priv->urb->pipe = pipe;
- priv->urb->complete = stub_complete;
+ for (i = 0; i < num_urbs; i++) {
+ /* set other members from the base header of pdu */
+ priv->urbs[i]->context = (void *) priv;
+ priv->urbs[i]->dev = udev;
+ priv->urbs[i]->pipe = pipe;
+ priv->urbs[i]->complete = stub_complete;
- usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);
+ /* no need to submit an intercepted request, but harmless? */
+ tweak_special_requests(priv->urbs[i]);
+ masking_bogus_flags(priv->urbs[i]);
+ }
- if (usbip_recv_xbuff(ud, priv->urb) < 0)
+ if (stub_recv_xbuff(ud, priv) < 0)
return;
- if (usbip_recv_iso(ud, priv->urb) < 0)
+ if (usbip_recv_iso(ud, priv->urbs[0]) < 0)
return;
- /* no need to submit an intercepted request, but harmless? */
- tweak_special_requests(priv->urb);
-
- masking_bogus_flags(priv->urb);
/* urb is now ready to submit */
- ret = usb_submit_urb(priv->urb, GFP_KERNEL);
-
- if (ret == 0)
- usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
- pdu->base.seqnum);
- else {
- dev_err(&udev->dev, "submit_urb error, %d\n", ret);
- usbip_dump_header(pdu);
- usbip_dump_urb(priv->urb);
-
- /*
- * Pessimistic.
- * This connection will be discarded.
- */
- usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
+ for (i = 0; i < priv->num_urbs; i++) {
+ ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL);
+
+ if (ret == 0)
+ usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
+ pdu->base.seqnum);
+ else {
+ dev_err(&udev->dev, "submit_urb error, %d\n", ret);
+ usbip_dump_header(pdu);
+ usbip_dump_urb(priv->urbs[i]);
+
+ /*
+ * Pessimistic.
+ * This connection will be discarded.
+ */
+ usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
+ break;
+ }
}
usbip_dbg_stub_rx("Leave\n");
+ return;
+
+err_urb:
+ kfree(priv->urbs);
+err_urbs:
+ kfree(buffer);
+ sgl_free(sgl);
+err_malloc:
+ usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
}
/* recv a pdu */
diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c
index f0ec41a50cbc..36010a82b359 100644
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -5,25 +5,11 @@
#include <linux/kthread.h>
#include <linux/socket.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
-static void stub_free_priv_and_urb(struct stub_priv *priv)
-{
- struct urb *urb = priv->urb;
-
- kfree(urb->setup_packet);
- urb->setup_packet = NULL;
-
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = NULL;
-
- list_del(&priv->list);
- kmem_cache_free(stub_priv_cache, priv);
- usb_free_urb(urb);
-}
-
/* be in spin_lock_irqsave(&sdev->priv_lock, flags) */
void stub_enqueue_ret_unlink(struct stub_device *sdev, __u32 seqnum,
__u32 status)
@@ -85,6 +71,22 @@ void stub_complete(struct urb *urb)
break;
}
+ /*
+ * If the server breaks single SG request into the several URBs, the
+ * URBs must be reassembled before sending completed URB to the vhci.
+ * Don't wake up the tx thread until all the URBs are completed.
+ */
+ if (priv->sgl) {
+ priv->completed_urbs++;
+
+ /* Only save the first error status */
+ if (urb->status && !priv->urb_status)
+ priv->urb_status = urb->status;
+
+ if (priv->completed_urbs < priv->num_urbs)
+ return;
+ }
+
/* link a urb to the queue of tx. */
spin_lock_irqsave(&sdev->priv_lock, flags);
if (sdev->ud.tcp_socket == NULL) {
@@ -156,18 +158,22 @@ static int stub_send_ret_submit(struct stub_device *sdev)
size_t total_size = 0;
while ((priv = dequeue_from_priv_tx(sdev)) != NULL) {
- int ret;
- struct urb *urb = priv->urb;
+ struct urb *urb = priv->urbs[0];
struct usbip_header pdu_header;
struct usbip_iso_packet_descriptor *iso_buffer = NULL;
struct kvec *iov = NULL;
+ struct scatterlist *sg;
+ u32 actual_length = 0;
int iovnum = 0;
+ int ret;
+ int i;
txsize = 0;
memset(&pdu_header, 0, sizeof(pdu_header));
memset(&msg, 0, sizeof(msg));
- if (urb->actual_length > 0 && !urb->transfer_buffer) {
+ if (urb->actual_length > 0 && !urb->transfer_buffer &&
+ !urb->num_sgs) {
dev_err(&sdev->udev->dev,
"urb: actual_length %d transfer_buffer null\n",
urb->actual_length);
@@ -176,6 +182,11 @@ static int stub_send_ret_submit(struct stub_device *sdev)
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
iovnum = 2 + urb->number_of_packets;
+ else if (usb_pipein(urb->pipe) && urb->actual_length > 0 &&
+ urb->num_sgs)
+ iovnum = 1 + urb->num_sgs;
+ else if (usb_pipein(urb->pipe) && priv->sgl)
+ iovnum = 1 + priv->num_urbs;
else
iovnum = 2;
@@ -192,6 +203,15 @@ static int stub_send_ret_submit(struct stub_device *sdev)
setup_ret_submit_pdu(&pdu_header, urb);
usbip_dbg_stub_tx("setup txdata seqnum: %d\n",
pdu_header.base.seqnum);
+
+ if (priv->sgl) {
+ for (i = 0; i < priv->num_urbs; i++)
+ actual_length += priv->urbs[i]->actual_length;
+
+ pdu_header.u.ret_submit.status = priv->urb_status;
+ pdu_header.u.ret_submit.actual_length = actual_length;
+ }
+
usbip_header_correct_endian(&pdu_header, 1);
iov[iovnum].iov_base = &pdu_header;
@@ -200,12 +220,47 @@ static int stub_send_ret_submit(struct stub_device *sdev)
txsize += sizeof(pdu_header);
/* 2. setup transfer buffer */
- if (usb_pipein(urb->pipe) &&
+ if (usb_pipein(urb->pipe) && priv->sgl) {
+ /* If the server split a single SG request into several
+ * URBs because the server's HCD doesn't support SG,
+ * reassemble the split URB buffers into a single
+ * return command.
+ */
+ for (i = 0; i < priv->num_urbs; i++) {
+ iov[iovnum].iov_base =
+ priv->urbs[i]->transfer_buffer;
+ iov[iovnum].iov_len =
+ priv->urbs[i]->actual_length;
+ iovnum++;
+ }
+ txsize += actual_length;
+ } else if (usb_pipein(urb->pipe) &&
usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS &&
urb->actual_length > 0) {
- iov[iovnum].iov_base = urb->transfer_buffer;
- iov[iovnum].iov_len = urb->actual_length;
- iovnum++;
+ if (urb->num_sgs) {
+ unsigned int copy = urb->actual_length;
+ int size;
+
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ if (copy == 0)
+ break;
+
+ if (copy < sg->length)
+ size = copy;
+ else
+ size = sg->length;
+
+ iov[iovnum].iov_base = sg_virt(sg);
+ iov[iovnum].iov_len = size;
+
+ iovnum++;
+ copy -= size;
+ }
+ } else {
+ iov[iovnum].iov_base = urb->transfer_buffer;
+ iov[iovnum].iov_len = urb->actual_length;
+ iovnum++;
+ }
txsize += urb->actual_length;
} else if (usb_pipein(urb->pipe) &&
usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c
index 45da3e01c7b0..6532d68e8808 100644
--- a/drivers/usb/usbip/usbip_common.c
+++ b/drivers/usb/usbip/usbip_common.c
@@ -680,8 +680,12 @@ EXPORT_SYMBOL_GPL(usbip_pad_iso);
/* some members of urb must be substituted before. */
int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb)
{
- int ret;
+ struct scatterlist *sg;
+ int ret = 0;
+ int recv;
int size;
+ int copy;
+ int i;
if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) {
/* the direction of urb must be OUT. */
@@ -701,29 +705,48 @@ int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb)
if (!(size > 0))
return 0;
- if (size > urb->transfer_buffer_length) {
+ if (size > urb->transfer_buffer_length)
/* should not happen, probably malicious packet */
- if (ud->side == USBIP_STUB) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
- return 0;
- } else {
- usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
- return -EPIPE;
- }
- }
+ goto error;
- ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size);
- if (ret != size) {
- dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret);
- if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
- } else {
- usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
- return -EPIPE;
+ if (urb->num_sgs) {
+ copy = size;
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ int recv_size;
+
+ if (copy < sg->length)
+ recv_size = copy;
+ else
+ recv_size = sg->length;
+
+ recv = usbip_recv(ud->tcp_socket, sg_virt(sg),
+ recv_size);
+
+ if (recv != recv_size)
+ goto error;
+
+ copy -= recv;
+ ret += recv;
}
+
+ if (ret != size)
+ goto error;
+ } else {
+ ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size);
+ if (ret != size)
+ goto error;
}
return ret;
+
+error:
+ dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret);
+ if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC)
+ usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+ else
+ usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+
+ return -EPIPE;
}
EXPORT_SYMBOL_GPL(usbip_recv_xbuff);
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 000ab7225717..585a84d319bd 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -697,7 +697,8 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag
}
vdev = &vhci_hcd->vdev[portnum-1];
- if (!urb->transfer_buffer && urb->transfer_buffer_length) {
+ if (!urb->transfer_buffer && !urb->num_sgs &&
+ urb->transfer_buffer_length) {
dev_dbg(dev, "Null URB transfer buffer\n");
return -EINVAL;
}
@@ -1143,6 +1144,15 @@ static int vhci_setup(struct usb_hcd *hcd)
hcd->speed = HCD_USB3;
hcd->self.root_hub->speed = USB_SPEED_SUPER;
}
+
+ /*
+ * Support SG.
+ * sg_tablesize is an arbitrary value to alleviate memory pressure
+ * on the host.
+ */
+ hcd->self.sg_tablesize = 32;
+ hcd->self.no_sg_constraint = 1;
+
return 0;
}
diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c
index 44cd64518925..33f8972ba842 100644
--- a/drivers/usb/usbip/vhci_rx.c
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -90,6 +90,9 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev,
if (usbip_dbg_flag_vhci_rx)
usbip_dump_urb(urb);
+ if (urb->num_sgs)
+ urb->transfer_flags &= ~URB_DMA_MAP_SG;
+
usbip_dbg_vhci_rx("now giveback urb %u\n", pdu->base.seqnum);
spin_lock_irqsave(&vhci->lock, flags);
diff --git a/drivers/usb/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c
index 2fa26d0578d7..c3803785f6ef 100644
--- a/drivers/usb/usbip/vhci_tx.c
+++ b/drivers/usb/usbip/vhci_tx.c
@@ -5,6 +5,7 @@
#include <linux/kthread.h>
#include <linux/slab.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "vhci.h"
@@ -50,19 +51,23 @@ static struct vhci_priv *dequeue_from_priv_tx(struct vhci_device *vdev)
static int vhci_send_cmd_submit(struct vhci_device *vdev)
{
+ struct usbip_iso_packet_descriptor *iso_buffer = NULL;
struct vhci_priv *priv = NULL;
+ struct scatterlist *sg;
struct msghdr msg;
- struct kvec iov[3];
+ struct kvec *iov;
size_t txsize;
size_t total_size = 0;
+ int iovnum;
+ int err = -ENOMEM;
+ int i;
while ((priv = dequeue_from_priv_tx(vdev)) != NULL) {
int ret;
struct urb *urb = priv->urb;
struct usbip_header pdu_header;
- struct usbip_iso_packet_descriptor *iso_buffer = NULL;
txsize = 0;
memset(&pdu_header, 0, sizeof(pdu_header));
@@ -72,18 +77,45 @@ static int vhci_send_cmd_submit(struct vhci_device *vdev)
usbip_dbg_vhci_tx("setup txdata urb seqnum %lu\n",
priv->seqnum);
+ if (urb->num_sgs && usb_pipeout(urb->pipe))
+ iovnum = 2 + urb->num_sgs;
+ else
+ iovnum = 3;
+
+ iov = kcalloc(iovnum, sizeof(*iov), GFP_KERNEL);
+ if (!iov) {
+ usbip_event_add(&vdev->ud, SDEV_EVENT_ERROR_MALLOC);
+ return -ENOMEM;
+ }
+
+ if (urb->num_sgs)
+ urb->transfer_flags |= URB_DMA_MAP_SG;
+
/* 1. setup usbip_header */
setup_cmd_submit_pdu(&pdu_header, urb);
usbip_header_correct_endian(&pdu_header, 1);
+ iovnum = 0;
- iov[0].iov_base = &pdu_header;
- iov[0].iov_len = sizeof(pdu_header);
+ iov[iovnum].iov_base = &pdu_header;
+ iov[iovnum].iov_len = sizeof(pdu_header);
txsize += sizeof(pdu_header);
+ iovnum++;
/* 2. setup transfer buffer */
if (!usb_pipein(urb->pipe) && urb->transfer_buffer_length > 0) {
- iov[1].iov_base = urb->transfer_buffer;
- iov[1].iov_len = urb->transfer_buffer_length;
+ if (urb->num_sgs &&
+ !usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ iov[iovnum].iov_base = sg_virt(sg);
+ iov[iovnum].iov_len = sg->length;
+ iovnum++;
+ }
+ } else {
+ iov[iovnum].iov_base = urb->transfer_buffer;
+ iov[iovnum].iov_len =
+ urb->transfer_buffer_length;
+ iovnum++;
+ }
txsize += urb->transfer_buffer_length;
}
@@ -95,23 +127,26 @@ static int vhci_send_cmd_submit(struct vhci_device *vdev)
if (!iso_buffer) {
usbip_event_add(&vdev->ud,
SDEV_EVENT_ERROR_MALLOC);
- return -1;
+ goto err_iso_buffer;
}
- iov[2].iov_base = iso_buffer;
- iov[2].iov_len = len;
+ iov[iovnum].iov_base = iso_buffer;
+ iov[iovnum].iov_len = len;
+ iovnum++;
txsize += len;
}
- ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 3, txsize);
+ ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, iovnum,
+ txsize);
if (ret != txsize) {
pr_err("sendmsg failed!, ret=%d for %zd\n", ret,
txsize);
- kfree(iso_buffer);
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
- return -1;
+ err = -EPIPE;
+ goto err_tx;
}
+ kfree(iov);
kfree(iso_buffer);
usbip_dbg_vhci_tx("send txdata\n");
@@ -119,6 +154,13 @@ static int vhci_send_cmd_submit(struct vhci_device *vdev)
}
return total_size;
+
+err_tx:
+ kfree(iso_buffer);
+err_iso_buffer:
+ kfree(iov);
+
+ return err;
}
static struct vhci_unlink *dequeue_from_unlink_tx(struct vhci_device *vdev)
diff --git a/drivers/usb/usbip/vudc.h b/drivers/usb/usbip/vudc.h
index cf968192e59f..1bd4bc005829 100644
--- a/drivers/usb/usbip/vudc.h
+++ b/drivers/usb/usbip/vudc.h
@@ -115,7 +115,7 @@ struct vudc_device {
struct list_head dev_entry;
};
-extern const struct attribute_group vudc_attr_group;
+extern const struct attribute_group *vudc_groups[];
/* visible everywhere */
diff --git a/drivers/usb/usbip/vudc_dev.c b/drivers/usb/usbip/vudc_dev.c
index a72c17ff1c6a..c8eeabdd9b56 100644
--- a/drivers/usb/usbip/vudc_dev.c
+++ b/drivers/usb/usbip/vudc_dev.c
@@ -616,18 +616,10 @@ int vudc_probe(struct platform_device *pdev)
if (ret < 0)
goto err_add_udc;
- ret = sysfs_create_group(&pdev->dev.kobj, &vudc_attr_group);
- if (ret) {
- dev_err(&udc->pdev->dev, "create sysfs files\n");
- goto err_sysfs;
- }
-
platform_set_drvdata(pdev, udc);
return ret;
-err_sysfs:
- usb_del_gadget_udc(&udc->gadget);
err_add_udc:
cleanup_vudc_hw(udc);
err_init_vudc_hw:
@@ -640,7 +632,6 @@ int vudc_remove(struct platform_device *pdev)
{
struct vudc *udc = platform_get_drvdata(pdev);
- sysfs_remove_group(&pdev->dev.kobj, &vudc_attr_group);
usb_del_gadget_udc(&udc->gadget);
cleanup_vudc_hw(udc);
kfree(udc);
diff --git a/drivers/usb/usbip/vudc_main.c b/drivers/usb/usbip/vudc_main.c
index 390733e6937e..678faa82598c 100644
--- a/drivers/usb/usbip/vudc_main.c
+++ b/drivers/usb/usbip/vudc_main.c
@@ -22,6 +22,7 @@ static struct platform_driver vudc_driver = {
.remove = vudc_remove,
.driver = {
.name = GADGET_NAME,
+ .dev_groups = vudc_groups,
},
};
diff --git a/drivers/usb/usbip/vudc_sysfs.c b/drivers/usb/usbip/vudc_sysfs.c
index 6dcd3ff655c3..100f680c572a 100644
--- a/drivers/usb/usbip/vudc_sysfs.c
+++ b/drivers/usb/usbip/vudc_sysfs.c
@@ -215,7 +215,12 @@ static struct bin_attribute *dev_bin_attrs[] = {
NULL,
};
-const struct attribute_group vudc_attr_group = {
+static const struct attribute_group vudc_attr_group = {
.attrs = dev_attrs,
.bin_attrs = dev_bin_attrs,
};
+
+const struct attribute_group *vudc_groups[] = {
+ &vudc_attr_group,
+ NULL,
+};