summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-02-22 04:21:32 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-02-22 04:21:32 +0300
commit79f4d1d5c0d7d115b5a693a5bb369e69efb7e7a5 (patch)
tree0b571a25f3666ed36c25139c75705dde5682488a /drivers
parent97a229f90731894f46b85c20bcc1842f4a63cb78 (diff)
parent73b2951414f661e22dc4b88e4e6590c9406cf822 (diff)
downloadlinux-79f4d1d5c0d7d115b5a693a5bb369e69efb7e7a5.tar.xz
Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: - Bartlomiej added pata_falcon - Christoph is trying to remove use of static 4k buf. It's still WIP - config cleanup around HAS_DMA - other fixes and driver-specific changes * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits) ata: pata_of_platform: using of_property_read_u32() helper pata_atiixp: Don't use unconnected secondary port on SB600/SB700 libata-sff: Don't scan disabled ports when checking for legacy mode. pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode() ahci: qoriq: added ls2088a platforms support ahci: qoriq: report error when ecc register address is missing in dts ahci: qoriq: added a condition to enable dma coherence Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf" ahci: imx: fix building without hwmon or thermal ata: add Atari Falcon PATA controller driver ata: pass queued command to ->sff_data_xfer method ata: allow subsystem to be used on m68k arch libata: switch to dynamic allocation instead of ata_scsi_rbuf libata: don't call ata_scsi_rbuf_fill for command without a response buffer libata: call ->scsi_done from ata_scsi_simulate libata: remove the done callback from ata_scsi_args libata: move struct ata_scsi_args to libata-scsi.c libata: avoid global response buffer in atapi_qc_complete libata-eh: Use switch() instead of sparse array for protocol strings ata: sata_mv: Convert to devm_ioremap_resource() ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ata/Kconfig19
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/ahci_imx.c196
-rw-r--r--drivers/ata/ahci_qoriq.c35
-rw-r--r--drivers/ata/ahci_xgene.c6
-rw-r--r--drivers/ata/libata-core.c61
-rw-r--r--drivers/ata/libata-eh.c44
-rw-r--r--drivers/ata/libata-scsi.c97
-rw-r--r--drivers/ata/libata-sff.c45
-rw-r--r--drivers/ata/libata.h8
-rw-r--r--drivers/ata/pata_at91.c6
-rw-r--r--drivers/ata/pata_atiixp.c5
-rw-r--r--drivers/ata/pata_bf54x.c7
-rw-r--r--drivers/ata/pata_ep93xx.c4
-rw-r--r--drivers/ata/pata_falcon.c184
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c4
-rw-r--r--drivers/ata/pata_legacy.c15
-rw-r--r--drivers/ata/pata_octeon_cf.c20
-rw-r--r--drivers/ata/pata_of_platform.c9
-rw-r--r--drivers/ata/pata_pcmcia.c6
-rw-r--r--drivers/ata/pata_samsung_cf.c4
-rw-r--r--drivers/ata/sata_mv.c15
-rw-r--r--drivers/ata/sata_rcar.c4
23 files changed, 608 insertions, 187 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 2c8be74f401d..70b57d2229d6 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -14,7 +14,7 @@ menuconfig ATA
tristate "Serial ATA and Parallel ATA drivers (libata)"
depends on HAS_IOMEM
depends on BLOCK
- depends on !(M32R || M68K || S390) || BROKEN
+ depends on !(M32R || S390) || BROKEN
select SCSI
select GLOB
---help---
@@ -80,6 +80,8 @@ config SATA_PMP
This option adds support for SATA Port Multipliers
(the SATA version of an ethernet hub, or SAS expander).
+if HAS_DMA
+
comment "Controllers with non-SFF native interface"
config SATA_AHCI
@@ -127,6 +129,7 @@ config AHCI_ST
config AHCI_IMX
tristate "Freescale i.MX AHCI SATA support"
depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
+ depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
@@ -232,6 +235,8 @@ config SATA_SIL24
If unsure, say N.
+endif # HAS_DMA
+
config ATA_SFF
bool "ATA SFF support (for legacy IDE and PATA)"
default y
@@ -289,6 +294,7 @@ config SATA_SX4
config ATA_BMDMA
bool "ATA BMDMA support"
+ depends on HAS_DMA
default y
help
This option adds support for SFF ATA controllers with BMDMA
@@ -344,6 +350,7 @@ config SATA_DWC_VDEBUG
config SATA_HIGHBANK
tristate "Calxeda Highbank SATA support"
+ depends on HAS_DMA
depends on ARCH_HIGHBANK || COMPILE_TEST
help
This option enables support for the Calxeda Highbank SoC's
@@ -353,6 +360,7 @@ config SATA_HIGHBANK
config SATA_MV
tristate "Marvell SATA support"
+ depends on HAS_DMA
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
select GENERIC_PHY
@@ -895,6 +903,15 @@ config PATA_CMD640_PCI
If unsure, say N.
+config PATA_FALCON
+ tristate "Atari Falcon PATA support"
+ depends on M68K && ATARI
+ help
+ This option enables support for the on-board IDE
+ interface on the Atari Falcon.
+
+ If unsure, say N.
+
config PATA_ISAPNP
tristate "ISA Plug and Play PATA support"
depends on ISAPNP
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index a46e6b784bda..89a0a1915d36 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -93,6 +93,7 @@ obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
obj-$(CONFIG_PATA_AT32) += pata_at32.o
obj-$(CONFIG_PATA_AT91) += pata_at91.o
obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
+obj-$(CONFIG_PATA_FALCON) += pata_falcon.o
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 3f3a7db208ae..787567e840bd 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -26,6 +26,9 @@
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/libata.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/thermal.h>
#include "ahci.h"
#define DRV_NAME "ahci-imx"
@@ -214,6 +217,180 @@ static int imx_sata_phy_reset(struct ahci_host_priv *hpriv)
return timeout ? 0 : -ETIMEDOUT;
}
+enum {
+ /* SATA PHY Register */
+ SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT = 0x0001,
+ SATA_PHY_CR_CLOCK_DAC_CTL = 0x0008,
+ SATA_PHY_CR_CLOCK_RTUNE_CTL = 0x0009,
+ SATA_PHY_CR_CLOCK_ADC_OUT = 0x000A,
+ SATA_PHY_CR_CLOCK_MPLL_TST = 0x0017,
+};
+
+static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio)
+{
+ u16 adc_out_reg, read_sum;
+ u32 index, read_attempt;
+ const u32 attempt_limit = 100;
+
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
+ imx_phy_reg_write(rtune_ctl_reg, mmio);
+
+ /* two dummy read */
+ index = 0;
+ read_attempt = 0;
+ adc_out_reg = 0;
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_ADC_OUT, mmio);
+ while (index < 2) {
+ imx_phy_reg_read(&adc_out_reg, mmio);
+ /* check if valid */
+ if (adc_out_reg & 0x400)
+ index++;
+
+ read_attempt++;
+ if (read_attempt > attempt_limit) {
+ dev_err(dev, "Read REG more than %d times!\n",
+ attempt_limit);
+ break;
+ }
+ }
+
+ index = 0;
+ read_attempt = 0;
+ read_sum = 0;
+ while (index < 80) {
+ imx_phy_reg_read(&adc_out_reg, mmio);
+ if (adc_out_reg & 0x400) {
+ read_sum = read_sum + (adc_out_reg & 0x3FF);
+ index++;
+ }
+ read_attempt++;
+ if (read_attempt > attempt_limit) {
+ dev_err(dev, "Read REG more than %d times!\n",
+ attempt_limit);
+ break;
+ }
+ }
+
+ /* Use the U32 to make 1000 precision */
+ return (read_sum * 1000) / 80;
+}
+
+/* SATA AHCI temperature monitor */
+static int sata_ahci_read_temperature(void *dev, int *temp)
+{
+ u16 mpll_test_reg, rtune_ctl_reg, dac_ctl_reg, read_sum;
+ u32 str1, str2, str3, str4;
+ int m1, m2, a;
+ struct ahci_host_priv *hpriv = dev_get_drvdata(dev);
+ void __iomem *mmio = hpriv->mmio;
+
+ /* check rd-wr to reg */
+ read_sum = 0;
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT, mmio);
+ imx_phy_reg_write(read_sum, mmio);
+ imx_phy_reg_read(&read_sum, mmio);
+ if ((read_sum & 0xffff) != 0)
+ dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
+
+ imx_phy_reg_write(0x5A5A, mmio);
+ imx_phy_reg_read(&read_sum, mmio);
+ if ((read_sum & 0xffff) != 0x5A5A)
+ dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
+
+ imx_phy_reg_write(0x1234, mmio);
+ imx_phy_reg_read(&read_sum, mmio);
+ if ((read_sum & 0xffff) != 0x1234)
+ dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
+
+ /* start temperature test */
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
+ imx_phy_reg_read(&mpll_test_reg, mmio);
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
+ imx_phy_reg_read(&rtune_ctl_reg, mmio);
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
+ imx_phy_reg_read(&dac_ctl_reg, mmio);
+
+ /* mpll_tst.meas_iv ([12:2]) */
+ str1 = (mpll_test_reg >> 2) & 0x7FF;
+ /* rtune_ctl.mode ([1:0]) */
+ str2 = (rtune_ctl_reg) & 0x3;
+ /* dac_ctl.dac_mode ([14:12]) */
+ str3 = (dac_ctl_reg >> 12) & 0x7;
+ /* rtune_ctl.sel_atbp ([4]) */
+ str4 = (rtune_ctl_reg >> 4);
+
+ /* Calculate the m1 */
+ /* mpll_tst.meas_iv */
+ mpll_test_reg = (mpll_test_reg & 0xE03) | (512) << 2;
+ /* rtune_ctl.mode */
+ rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (1);
+ /* dac_ctl.dac_mode */
+ dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (4) << 12;
+ /* rtune_ctl.sel_atbp */
+ rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (0) << 4;
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
+ imx_phy_reg_write(mpll_test_reg, mmio);
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
+ imx_phy_reg_write(dac_ctl_reg, mmio);
+ m1 = read_adc_sum(dev, rtune_ctl_reg, mmio);
+
+ /* Calculate the m2 */
+ /* rtune_ctl.sel_atbp */
+ rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (1) << 4;
+ m2 = read_adc_sum(dev, rtune_ctl_reg, mmio);
+
+ /* restore the status */
+ /* mpll_tst.meas_iv */
+ mpll_test_reg = (mpll_test_reg & 0xE03) | (str1) << 2;
+ /* rtune_ctl.mode */
+ rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (str2);
+ /* dac_ctl.dac_mode */
+ dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (str3) << 12;
+ /* rtune_ctl.sel_atbp */
+ rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (str4) << 4;
+
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
+ imx_phy_reg_write(mpll_test_reg, mmio);
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
+ imx_phy_reg_write(dac_ctl_reg, mmio);
+ imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
+ imx_phy_reg_write(rtune_ctl_reg, mmio);
+
+ /* Compute temperature */
+ if (!(m2 / 1000))
+ m2 = 1000;
+ a = (m2 - m1) / (m2/1000);
+ *temp = ((-559) * a * a) / 1000 + (1379) * a + (-458000);
+
+ return 0;
+}
+
+static ssize_t sata_ahci_show_temp(struct device *dev,
+ struct device_attribute *da,
+ char *buf)
+{
+ unsigned int temp = 0;
+ int err;
+
+ err = sata_ahci_read_temperature(dev, &temp);
+ if (err < 0)
+ return err;
+
+ return sprintf(buf, "%u\n", temp);
+}
+
+static const struct thermal_zone_of_device_ops fsl_sata_ahci_of_thermal_ops = {
+ .get_temp = sata_ahci_read_temperature,
+};
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sata_ahci_show_temp, NULL, 0);
+
+static struct attribute *fsl_sata_ahci_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(fsl_sata_ahci);
+
static int imx_sata_enable(struct ahci_host_priv *hpriv)
{
struct imx_ahci_priv *imxpriv = hpriv->plat_data;
@@ -597,6 +774,25 @@ static int imx_ahci_probe(struct platform_device *pdev)
if (ret)
return ret;
+ if (imxpriv->type == AHCI_IMX53 &&
+ IS_ENABLED(CONFIG_HWMON)) {
+ /* Add the temperature monitor */
+ struct device *hwmon_dev;
+
+ hwmon_dev =
+ devm_hwmon_device_register_with_groups(dev,
+ "sata_ahci",
+ hpriv,
+ fsl_sata_ahci_groups);
+ if (IS_ERR(hwmon_dev)) {
+ ret = PTR_ERR(hwmon_dev);
+ goto disable_clk;
+ }
+ devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev,
+ &fsl_sata_ahci_of_thermal_ops);
+ dev_info(dev, "%s: sensor 'sata_ahci'\n", dev_name(hwmon_dev));
+ }
+
ret = imx_sata_enable(hpriv);
if (ret)
goto disable_clk;
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 9884c8c6e934..85d833289f28 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -46,19 +46,21 @@
#define LS1021A_AXICC_ADDR 0xC0
#define SATA_ECC_DISABLE 0x00020000
-#define LS1046A_SATA_ECC_DIS 0x80000000
+#define ECC_DIS_ARMV8_CH2 0x80000000
enum ahci_qoriq_type {
AHCI_LS1021A,
AHCI_LS1043A,
AHCI_LS2080A,
AHCI_LS1046A,
+ AHCI_LS2088A,
};
struct ahci_qoriq_priv {
struct ccsr_ahci *reg_base;
enum ahci_qoriq_type type;
void __iomem *ecc_addr;
+ bool is_dmacoherent;
};
static const struct of_device_id ahci_qoriq_of_match[] = {
@@ -66,6 +68,7 @@ static const struct of_device_id ahci_qoriq_of_match[] = {
{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
+ { .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
{},
};
MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
@@ -157,6 +160,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
switch (qpriv->type) {
case AHCI_LS1021A:
+ if (!qpriv->ecc_addr)
+ return -EINVAL;
writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
@@ -164,26 +169,43 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
- writel(AHCI_PORT_AXICC_CFG, reg_base + LS1021A_AXICC_ADDR);
+ if (qpriv->is_dmacoherent)
+ writel(AHCI_PORT_AXICC_CFG,
+ reg_base + LS1021A_AXICC_ADDR);
break;
case AHCI_LS1043A:
+ if (!qpriv->ecc_addr)
+ return -EINVAL;
+ writel(ECC_DIS_ARMV8_CH2, qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
- writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+ if (qpriv->is_dmacoherent)
+ writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
break;
case AHCI_LS2080A:
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
- writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+ if (qpriv->is_dmacoherent)
+ writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
break;
case AHCI_LS1046A:
- writel(LS1046A_SATA_ECC_DIS, qpriv->ecc_addr);
+ if (!qpriv->ecc_addr)
+ return -EINVAL;
+ writel(ECC_DIS_ARMV8_CH2, qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
- writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+ if (qpriv->is_dmacoherent)
+ writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
+ break;
+
+ case AHCI_LS2088A:
+ writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+ writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+ if (qpriv->is_dmacoherent)
+ writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
break;
}
@@ -221,6 +243,7 @@ static int ahci_qoriq_probe(struct platform_device *pdev)
if (IS_ERR(qoriq_priv->ecc_addr))
return PTR_ERR(qoriq_priv->ecc_addr);
}
+ qoriq_priv->is_dmacoherent = of_dma_is_coherent(np);
rc = ahci_platform_enable_resources(hpriv);
if (rc)
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 73b19b277138..c2b5941d9184 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -821,8 +821,10 @@ static int xgene_ahci_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n",
__func__);
version = XGENE_AHCI_V1;
- } else if (info->valid & ACPI_VALID_CID) {
- version = XGENE_AHCI_V2;
+ } else {
+ if (info->valid & ACPI_VALID_CID)
+ version = XGENE_AHCI_V2;
+ kfree(info);
}
}
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c2d3785ec227..ca75823697dd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4816,32 +4816,6 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
}
/**
- * ata_sg_clean - Unmap DMA memory associated with command
- * @qc: Command containing DMA memory to be released
- *
- * Unmap all mapped DMA memory associated with this command.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_sg_clean(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scatterlist *sg = qc->sg;
- int dir = qc->dma_dir;
-
- WARN_ON_ONCE(sg == NULL);
-
- VPRINTK("unmapping %u sg elements\n", qc->n_elem);
-
- if (qc->n_elem)
- dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
-
- qc->flags &= ~ATA_QCFLAG_DMAMAP;
- qc->sg = NULL;
-}
-
-/**
* atapi_check_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
@@ -4925,6 +4899,34 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
qc->cursg = qc->sg;
}
+#ifdef CONFIG_HAS_DMA
+
+/**
+ * ata_sg_clean - Unmap DMA memory associated with command
+ * @qc: Command containing DMA memory to be released
+ *
+ * Unmap all mapped DMA memory associated with this command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_sg_clean(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scatterlist *sg = qc->sg;
+ int dir = qc->dma_dir;
+
+ WARN_ON_ONCE(sg == NULL);
+
+ VPRINTK("unmapping %u sg elements\n", qc->n_elem);
+
+ if (qc->n_elem)
+ dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
+
+ qc->flags &= ~ATA_QCFLAG_DMAMAP;
+ qc->sg = NULL;
+}
+
/**
* ata_sg_setup - DMA-map the scatter-gather table associated with a command.
* @qc: Command with scatter-gather table to be mapped.
@@ -4957,6 +4959,13 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
return 0;
}
+#else /* !CONFIG_HAS_DMA */
+
+static inline void ata_sg_clean(struct ata_queued_cmd *qc) {}
+static inline int ata_sg_setup(struct ata_queued_cmd *qc) { return -1; }
+
+#endif /* !CONFIG_HAS_DMA */
+
/**
* swap_buf_le16 - swap halves of 16-bit words in place
* @buf: Buffer to swap
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 50ee10db160f..4e5bf36c5f46 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2607,21 +2607,39 @@ static void ata_eh_link_report(struct ata_link *link)
[DMA_TO_DEVICE] = "out",
[DMA_FROM_DEVICE] = "in",
};
- static const char *prot_str[] = {
- [ATA_PROT_UNKNOWN] = "unknown",
- [ATA_PROT_NODATA] = "nodata",
- [ATA_PROT_PIO] = "pio",
- [ATA_PROT_DMA] = "dma",
- [ATA_PROT_NCQ] = "ncq dma",
- [ATA_PROT_NCQ_NODATA] = "ncq nodata",
- [ATAPI_PROT_NODATA] = "nodata",
- [ATAPI_PROT_PIO] = "pio",
- [ATAPI_PROT_DMA] = "dma",
- };
+ const char *prot_str = NULL;
+ switch (qc->tf.protocol) {
+ case ATA_PROT_UNKNOWN:
+ prot_str = "unknown";
+ break;
+ case ATA_PROT_NODATA:
+ prot_str = "nodata";
+ break;
+ case ATA_PROT_PIO:
+ prot_str = "pio";
+ break;
+ case ATA_PROT_DMA:
+ prot_str = "dma";
+ break;
+ case ATA_PROT_NCQ:
+ prot_str = "ncq dma";
+ break;
+ case ATA_PROT_NCQ_NODATA:
+ prot_str = "ncq nodata";
+ break;
+ case ATAPI_PROT_NODATA:
+ prot_str = "nodata";
+ break;
+ case ATAPI_PROT_PIO:
+ prot_str = "pio";
+ break;
+ case ATAPI_PROT_DMA:
+ prot_str = "dma";
+ break;
+ }
snprintf(data_buf, sizeof(data_buf), " %s %u %s",
- prot_str[qc->tf.protocol], qc->nbytes,
- dma_str[qc->dma_dir]);
+ prot_str, qc->nbytes, dma_str[qc->dma_dir]);
}
if (ata_is_atapi(qc->tf.protocol)) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index c771d4c341ea..12d3a66600a3 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -484,13 +484,6 @@ struct device_attribute *ata_common_sdev_attrs[] = {
};
EXPORT_SYMBOL_GPL(ata_common_sdev_attrs);
-static void ata_scsi_invalid_field(struct ata_device *dev,
- struct scsi_cmnd *cmd, u16 field)
-{
- ata_scsi_set_invalid_field(dev, cmd, field, 0xff);
- cmd->scsi_done(cmd);
-}
-
/**
* ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
* @sdev: SCSI device for which BIOS geometry is to be determined
@@ -2057,6 +2050,12 @@ defer:
return SCSI_MLQUEUE_HOST_BUSY;
}
+struct ata_scsi_args {
+ struct ata_device *dev;
+ u16 *id;
+ struct scsi_cmnd *cmd;
+};
+
/**
* ata_scsi_rbuf_get - Map response buffer.
* @cmd: SCSI command containing buffer to be mapped.
@@ -2133,7 +2132,6 @@ static void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
if (rc == 0)
cmd->result = SAM_STAT_GOOD;
- args->done(cmd);
}
/**
@@ -2455,23 +2453,6 @@ static unsigned int ata_scsiop_inq_b6(struct ata_scsi_args *args, u8 *rbuf)
}
/**
- * ata_scsiop_noop - Command handler that simply returns success.
- * @args: device IDENTIFY data / SCSI command of interest.
- * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
- *
- * No operation. Simply returns success to caller, to indicate
- * that the caller should successfully complete this SCSI command.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-static unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf)
-{
- VPRINTK("ENTER\n");
- return 0;
-}
-
-/**
* modecpy - Prepare response for MODE SENSE
* @dest: output buffer
* @src: data being copied
@@ -2873,6 +2854,26 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
DPRINTK("EXIT\n");
}
+/*
+ * ATAPI devices typically report zero for their SCSI version, and sometimes
+ * deviate from the spec WRT response data format. If SCSI version is
+ * reported as zero like normal, then we make the following fixups:
+ * 1) Fake MMC-5 version, to indicate to the Linux scsi midlayer this is a
+ * modern device.
+ * 2) Ensure response data format / ATAPI information are always correct.
+ */
+static void atapi_fixup_inquiry(struct scsi_cmnd *cmd)
+{
+ u8 buf[4];
+
+ sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, 4);
+ if (buf[2] == 0) {
+ buf[2] = 0x5;
+ buf[3] = 0x32;
+ }
+ sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, 4);
+}
+
static void atapi_qc_complete(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
@@ -2927,30 +2928,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
*/
ata_gen_passthru_sense(qc);
} else {
- u8 *scsicmd = cmd->cmnd;
-
- if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
- unsigned long flags;
- u8 *buf;
-
- buf = ata_scsi_rbuf_get(cmd, true, &flags);
-
- /* ATAPI devices typically report zero for their SCSI version,
- * and sometimes deviate from the spec WRT response data
- * format. If SCSI version is reported as zero like normal,
- * then we make the following fixups: 1) Fake MMC-5 version,
- * to indicate to the Linux scsi midlayer this is a modern
- * device. 2) Ensure response data format / ATAPI information
- * are always correct.
- */
- if (buf[2] == 0) {
- buf[2] = 0x5;
- buf[3] = 0x32;
- }
-
- ata_scsi_rbuf_put(cmd, true, &flags);
- }
-
+ if (cmd->cmnd[0] == INQUIRY && (cmd->cmnd[1] & 0x03) == 0)
+ atapi_fixup_inquiry(cmd);
cmd->result = SAM_STAT_GOOD;
}
@@ -4352,12 +4331,11 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
args.dev = dev;
args.id = dev->id;
args.cmd = cmd;
- args.done = cmd->scsi_done;
switch(scsicmd[0]) {
case INQUIRY:
if (scsicmd[1] & 2) /* is CmdDt set? */
- ata_scsi_invalid_field(dev, cmd, 1);
+ ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
else switch (scsicmd[2]) {
@@ -4389,7 +4367,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
}
/* Fallthrough */
default:
- ata_scsi_invalid_field(dev, cmd, 2);
+ ata_scsi_set_invalid_field(dev, cmd, 2, 0xff);
break;
}
break;
@@ -4407,7 +4385,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
else
- ata_scsi_invalid_field(dev, cmd, 1);
+ ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
break;
case REPORT_LUNS:
@@ -4417,7 +4395,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
case REQUEST_SENSE:
ata_scsi_set_sense(dev, cmd, 0, 0, 0);
cmd->result = (DRIVER_SENSE << 24);
- cmd->scsi_done(cmd);
break;
/* if we reach this, then writeback caching is disabled,
@@ -4431,31 +4408,29 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
case SEEK_6:
case SEEK_10:
case TEST_UNIT_READY:
- ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
break;
case SEND_DIAGNOSTIC:
tmp8 = scsicmd[1] & ~(1 << 3);
- if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4]))
- ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
- else
- ata_scsi_invalid_field(dev, cmd, 1);
+ if (tmp8 != 0x4 || scsicmd[3] || scsicmd[4])
+ ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
break;
case MAINTENANCE_IN:
if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES)
ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in);
else
- ata_scsi_invalid_field(dev, cmd, 1);
+ ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
break;
/* all other commands */
default:
ata_scsi_set_sense(dev, cmd, ILLEGAL_REQUEST, 0x20, 0x0);
/* "Invalid command operation code" */
- cmd->scsi_done(cmd);
break;
}
+
+ cmd->scsi_done(cmd);
}
int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 051b6158d1b7..2bd92dca3e62 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -542,7 +542,7 @@ static inline void ata_tf_to_host(struct ata_port *ap,
/**
* ata_sff_data_xfer - Transfer data by PIO
- * @dev: device to target
+ * @qc: queued command
* @buf: data buffer
* @buflen: buffer length
* @rw: read/write
@@ -555,10 +555,10 @@ static inline void ata_tf_to_host(struct ata_port *ap,
* RETURNS:
* Bytes consumed.
*/
-unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
+unsigned int ata_sff_data_xfer(struct ata_queued_cmd *qc, unsigned char *buf,
unsigned int buflen, int rw)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 1;
@@ -595,7 +595,7 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
/**
* ata_sff_data_xfer32 - Transfer data by PIO
- * @dev: device to target
+ * @qc: queued command
* @buf: data buffer
* @buflen: buffer length
* @rw: read/write
@@ -610,16 +610,17 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
* Bytes consumed.
*/
-unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
+unsigned int ata_sff_data_xfer32(struct ata_queued_cmd *qc, unsigned char *buf,
unsigned int buflen, int rw)
{
+ struct ata_device *dev = qc->dev;
struct ata_port *ap = dev->link->ap;
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 2;
int slop = buflen & 3;
if (!(ap->pflags & ATA_PFLAG_PIO32))
- return ata_sff_data_xfer(dev, buf, buflen, rw);
+ return ata_sff_data_xfer(qc, buf, buflen, rw);
/* Transfer multiple of 4 bytes */
if (rw == READ)
@@ -658,7 +659,7 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
/**
* ata_sff_data_xfer_noirq - Transfer data by PIO
- * @dev: device to target
+ * @qc: queued command
* @buf: data buffer
* @buflen: buffer length
* @rw: read/write
@@ -672,14 +673,14 @@ EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
* RETURNS:
* Bytes consumed.
*/
-unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
+unsigned int ata_sff_data_xfer_noirq(struct ata_queued_cmd *qc, unsigned char *buf,
unsigned int buflen, int rw)
{
unsigned long flags;
unsigned int consumed;
local_irq_save(flags);
- consumed = ata_sff_data_xfer32(dev, buf, buflen, rw);
+ consumed = ata_sff_data_xfer32(qc, buf, buflen, rw);
local_irq_restore(flags);
return consumed;
@@ -723,14 +724,14 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
buf = kmap_atomic(page);
/* do the actual data transfer */
- ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size,
+ ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size,
do_write);
kunmap_atomic(buf);
local_irq_restore(flags);
} else {
buf = page_address(page);
- ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size,
+ ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size,
do_write);
}
@@ -791,7 +792,7 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
DPRINTK("send cdb\n");
WARN_ON_ONCE(qc->dev->cdb_len < 12);
- ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
+ ap->ops->sff_data_xfer(qc, qc->cdb, qc->dev->cdb_len, 1);
ata_sff_sync(ap);
/* FIXME: If the CDB is for DMA do we need to do the transition delay
or is bmdma_start guaranteed to do it ? */
@@ -868,14 +869,14 @@ next_sg:
buf = kmap_atomic(page);
/* do the actual data transfer */
- consumed = ap->ops->sff_data_xfer(dev, buf + offset,
+ consumed = ap->ops->sff_data_xfer(qc, buf + offset,
count, rw);
kunmap_atomic(buf);
local_irq_restore(flags);
} else {
buf = page_address(page);
- consumed = ap->ops->sff_data_xfer(dev, buf + offset,
+ consumed = ap->ops->sff_data_xfer(qc, buf + offset,
count, rw);
}
@@ -2427,11 +2428,21 @@ int ata_pci_sff_activate_host(struct ata_host *host,
return rc;
if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
- u8 tmp8, mask;
+ u8 tmp8, mask = 0;
- /* TODO: What if one channel is in native mode ... */
+ /*
+ * ATA spec says we should use legacy mode when one
+ * port is in legacy mode, but disabled ports on some
+ * PCI hosts appear as fixed legacy ports, e.g SB600/700
+ * on which the secondary port is not wired, so
+ * ignore ports that are marked as 'dummy' during
+ * this check
+ */
pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
- mask = (1 << 2) | (1 << 0);
+ if (!ata_port_is_dummy(host->ports[0]))
+ mask |= (1 << 0);
+ if (!ata_port_is_dummy(host->ports[1]))
+ mask |= (1 << 2);
if ((tmp8 & mask) != mask)
legacy_mode = 1;
}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 06d479d1f302..120fce0befd3 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -31,13 +31,6 @@
#define DRV_NAME "libata"
#define DRV_VERSION "3.00" /* must be exactly four chars */
-struct ata_scsi_args {
- struct ata_device *dev;
- u16 *id;
- struct scsi_cmnd *cmd;
- void (*done)(struct scsi_cmnd *);
-};
-
/* libata-core.c */
enum {
/* flags for ata_dev_read_id() */
@@ -89,7 +82,6 @@ extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
extern unsigned int ata_dev_set_feature(struct ata_device *dev,
u8 enable, u8 feature);
-extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 1611e0e8d767..fd5b34f0d007 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -286,10 +286,10 @@ static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
set_smc_timing(ap->dev, adev, info, &timing);
}
-static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
+static unsigned int pata_at91_data_xfer_noirq(struct ata_queued_cmd *qc,
unsigned char *buf, unsigned int buflen, int rw)
{
- struct at91_ide_info *info = dev->link->ap->host->private_data;
+ struct at91_ide_info *info = qc->dev->link->ap->host->private_data;
unsigned int consumed;
unsigned int mode;
unsigned long flags;
@@ -301,7 +301,7 @@ static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
AT91_SMC_DBW_16);
- consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+ consumed = ata_sff_data_xfer(qc, buf, buflen, rw);
/* restore 8bit mode after data is written */
regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 49d705c9f0f7..6c9aa95a9a05 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -278,6 +278,11 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &info, &info };
+ /* SB600/700 don't have secondary port wired */
+ if ((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE) ||
+ (pdev->device == PCI_DEVICE_ID_ATI_IXP700_IDE))
+ ppi[1] = &ata_dummy_port_info;
+
return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
ATA_HOST_PARALLEL_SCAN);
}
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index ec748d31928d..9c5780a7e1b9 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1143,7 +1143,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
/**
* bfin_data_xfer - Transfer data by PIO
- * @adev: device for this I/O
+ * @qc: queued command
* @buf: data buffer
* @buflen: buffer length
* @write_data: read/write
@@ -1151,10 +1151,11 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
* Note: Original code is ata_sff_data_xfer().
*/
-static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
+static unsigned int bfin_data_xfer(struct ata_queued_cmd *qc,
+ unsigned char *buf,
unsigned int buflen, int rw)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
unsigned int words = buflen >> 1;
unsigned short *buf16 = (u16 *)buf;
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index bd6b089c67a3..bf1b910c5d69 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -474,11 +474,11 @@ static void ep93xx_pata_set_devctl(struct ata_port *ap, u8 ctl)
}
/* Note: original code is ata_sff_data_xfer */
-static unsigned int ep93xx_pata_data_xfer(struct ata_device *adev,
+static unsigned int ep93xx_pata_data_xfer(struct ata_queued_cmd *qc,
unsigned char *buf,
unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
struct ep93xx_pata_data *drv_data = ap->host->private_data;
u16 *data = (u16 *)buf;
unsigned int words = buflen >> 1;
diff --git a/drivers/ata/pata_falcon.c b/drivers/ata/pata_falcon.c
new file mode 100644
index 000000000000..5b0c57d1c59f
--- /dev/null
+++ b/drivers/ata/pata_falcon.c
@@ -0,0 +1,184 @@
+/*
+ * Atari Falcon PATA controller driver
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on falconide.c:
+ *
+ * Created 12 Jul 1997 by Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/setup.h>
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+#include <asm/atari_stdma.h>
+#include <asm/ide.h>
+
+#define DRV_NAME "pata_falcon"
+#define DRV_VERSION "0.1.0"
+
+#define ATA_HD_BASE 0xfff00000
+#define ATA_HD_CONTROL 0x39
+
+static struct scsi_host_template pata_falcon_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static unsigned int pata_falcon_data_xfer(struct ata_queued_cmd *qc,
+ unsigned char *buf,
+ unsigned int buflen, int rw)
+{
+ struct ata_device *dev = qc->dev;
+ struct ata_port *ap = dev->link->ap;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
+ unsigned int words = buflen >> 1;
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ bool swap = 1;
+
+ if (dev->class == ATA_DEV_ATA && cmd && cmd->request &&
+ !blk_rq_is_passthrough(cmd->request))
+ swap = 0;
+
+ /* Transfer multiple of 2 bytes */
+ if (rw == READ) {
+ if (swap)
+ raw_insw_swapw((u16 *)data_addr, (u16 *)buf, words);
+ else
+ raw_insw((u16 *)data_addr, (u16 *)buf, words);
+ } else {
+ if (swap)
+ raw_outsw_swapw((u16 *)data_addr, (u16 *)buf, words);
+ else
+ raw_outsw((u16 *)data_addr, (u16 *)buf, words);
+ }
+
+ /* Transfer trailing byte, if any. */
+ if (unlikely(buflen & 0x01)) {
+ unsigned char pad[2] = { };
+
+ /* Point buf to the tail of buffer */
+ buf += buflen - 1;
+
+ if (rw == READ) {
+ if (swap)
+ raw_insw_swapw((u16 *)data_addr, (u16 *)pad, 1);
+ else
+ raw_insw((u16 *)data_addr, (u16 *)pad, 1);
+ *buf = pad[0];
+ } else {
+ pad[0] = *buf;
+ if (swap)
+ raw_outsw_swapw((u16 *)data_addr, (u16 *)pad, 1);
+ else
+ raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
+ }
+ words++;
+ }
+
+ return words << 1;
+}
+
+/*
+ * Provide our own set_mode() as we don't want to change anything that has
+ * already been configured..
+ */
+static int pata_falcon_set_mode(struct ata_link *link,
+ struct ata_device **unused)
+{
+ struct ata_device *dev;
+
+ ata_for_each_dev(dev, link, ENABLED) {
+ /* We don't really care */
+ dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ ata_dev_info(dev, "configured for PIO\n");
+ }
+ return 0;
+}
+
+static struct ata_port_operations pata_falcon_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = pata_falcon_data_xfer,
+ .cable_detect = ata_cable_unknown,
+ .set_mode = pata_falcon_set_mode,
+};
+
+static int pata_falcon_init_one(void)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ struct platform_device *pdev;
+ void __iomem *base;
+
+ if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
+ return -ENODEV;
+
+ pr_info(DRV_NAME ": Atari Falcon PATA controller\n");
+
+ pdev = platform_device_register_simple(DRV_NAME, 0, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ if (!devm_request_mem_region(&pdev->dev, ATA_HD_BASE, 0x40, DRV_NAME)) {
+ pr_err(DRV_NAME ": resources busy\n");
+ return -EBUSY;
+ }
+
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+ ap = host->ports[0];
+
+ ap->ops = &pata_falcon_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
+ ap->flags |= ATA_FLAG_PIO_POLLING;
+
+ base = (void __iomem *)ATA_HD_BASE;
+ ap->ioaddr.data_addr = base;
+ ap->ioaddr.error_addr = base + 1 + 1 * 4;
+ ap->ioaddr.feature_addr = base + 1 + 1 * 4;
+ ap->ioaddr.nsect_addr = base + 1 + 2 * 4;
+ ap->ioaddr.lbal_addr = base + 1 + 3 * 4;
+ ap->ioaddr.lbam_addr = base + 1 + 4 * 4;
+ ap->ioaddr.lbah_addr = base + 1 + 5 * 4;
+ ap->ioaddr.device_addr = base + 1 + 6 * 4;
+ ap->ioaddr.status_addr = base + 1 + 7 * 4;
+ ap->ioaddr.command_addr = base + 1 + 7 * 4;
+
+ ap->ioaddr.altstatus_addr = base + ATA_HD_CONTROL;
+ ap->ioaddr.ctl_addr = base + ATA_HD_CONTROL;
+
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", (unsigned long)base,
+ (unsigned long)base + ATA_HD_CONTROL);
+
+ /* activate */
+ return ata_host_activate(host, 0, NULL, 0, &pata_falcon_sht);
+}
+
+module_init(pata_falcon_init_one);
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for Atari Falcon PATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index abda44183512..0b0d93065f5a 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -40,13 +40,13 @@ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
return 0;
}
-static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev,
+static unsigned int ixp4xx_mmio_data_xfer(struct ata_queued_cmd *qc,
unsigned char *buf, unsigned int buflen, int rw)
{
unsigned int i;
unsigned int words = buflen >> 1;
u16 *buf16 = (u16 *) buf;
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
void __iomem *mmio = ap->ioaddr.data_addr;
struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index bce2a8ca4678..53828b6c3044 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -303,11 +303,12 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
-static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
+static unsigned int pdc_data_xfer_vlb(struct ata_queued_cmd *qc,
unsigned char *buf, unsigned int buflen, int rw)
{
- int slop = buflen & 3;
+ struct ata_device *dev = qc->dev;
struct ata_port *ap = dev->link->ap;
+ int slop = buflen & 3;
/* 32bit I/O capable *and* we need to write a whole number of dwords */
if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
@@ -340,7 +341,7 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
}
local_irq_restore(flags);
} else
- buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw);
+ buflen = ata_sff_data_xfer_noirq(qc, buf, buflen, rw);
return buflen;
}
@@ -702,9 +703,11 @@ static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
return ata_sff_qc_issue(qc);
}
-static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int rw)
+static unsigned int vlb32_data_xfer(struct ata_queued_cmd *qc,
+ unsigned char *buf,
+ unsigned int buflen, int rw)
{
+ struct ata_device *adev = qc->dev;
struct ata_port *ap = adev->link->ap;
int slop = buflen & 3;
@@ -727,7 +730,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
}
return (buflen + 3) & ~3;
} else
- return ata_sff_data_xfer(adev, buf, buflen, rw);
+ return ata_sff_data_xfer(qc, buf, buflen, rw);
}
static int qdi_port(struct platform_device *dev,
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 475a00669427..f524a9099d01 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -138,9 +138,7 @@ static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev)
int trh;
int pause;
/* These names are timing parameters from the ATA spec */
- int t1;
int t2;
- int t2i;
/*
* A divisor value of four will overflow the timing fields at
@@ -154,15 +152,9 @@ static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev)
BUG_ON(ata_timing_compute(dev, dev->pio_mode, &timing, T, T));
- t1 = timing.setup;
- if (t1)
- t1--;
t2 = timing.active;
if (t2)
t2--;
- t2i = timing.act8b;
- if (t2i)
- t2i--;
trh = ns_to_tim_reg(div, 20);
if (trh)
@@ -293,17 +285,17 @@ static void octeon_cf_set_dmamode(struct ata_port *ap, struct ata_device *dev)
/**
* Handle an 8 bit I/O request.
*
- * @dev: Device to access
+ * @qc: Queued command
* @buffer: Data buffer
* @buflen: Length of the buffer.
* @rw: True to write.
*/
-static unsigned int octeon_cf_data_xfer8(struct ata_device *dev,
+static unsigned int octeon_cf_data_xfer8(struct ata_queued_cmd *qc,
unsigned char *buffer,
unsigned int buflen,
int rw)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned long words;
int count;
@@ -332,17 +324,17 @@ static unsigned int octeon_cf_data_xfer8(struct ata_device *dev,
/**
* Handle a 16 bit I/O request.
*
- * @dev: Device to access
+ * @qc: Queued command
* @buffer: Data buffer
* @buflen: Length of the buffer.
* @rw: True to write.
*/
-static unsigned int octeon_cf_data_xfer16(struct ata_device *dev,
+static unsigned int octeon_cf_data_xfer16(struct ata_queued_cmd *qc,
unsigned char *buffer,
unsigned int buflen,
int rw)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned long words;
int count;
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index b6b7af894d9d..201a32d0627f 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -32,7 +32,6 @@ static int pata_of_platform_probe(struct platform_device *ofdev)
unsigned int reg_shift = 0;
int pio_mode = 0;
int pio_mask;
- const u32 *prop;
ret = of_address_to_resource(dn, 0, &io_res);
if (ret) {
@@ -50,13 +49,9 @@ static int pata_of_platform_probe(struct platform_device *ofdev)
irq_res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0);
- prop = of_get_property(dn, "reg-shift", NULL);
- if (prop)
- reg_shift = be32_to_cpup(prop);
+ of_property_read_u32(dn, "reg-shift", &reg_shift);
- prop = of_get_property(dn, "pio-mode", NULL);
- if (prop) {
- pio_mode = be32_to_cpup(prop);
+ if (!of_property_read_u32(dn, "pio-mode", &pio_mode)) {
if (pio_mode > 6) {
dev_err(&ofdev->dev, "invalid pio-mode\n");
return -EINVAL;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index bcc4b968c049..a541eacc5e95 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -90,7 +90,7 @@ static int pcmcia_set_mode_8bit(struct ata_link *link,
/**
* ata_data_xfer_8bit - Transfer data by 8bit PIO
- * @dev: device to target
+ * @qc: queued command
* @buf: data buffer
* @buflen: buffer length
* @rw: read/write
@@ -101,10 +101,10 @@ static int pcmcia_set_mode_8bit(struct ata_link *link,
* Inherited from caller.
*/
-static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
+static unsigned int ata_data_xfer_8bit(struct ata_queued_cmd *qc,
unsigned char *buf, unsigned int buflen, int rw)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
if (rw == READ)
ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index f6facd686f94..431c7de30ce6 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -263,10 +263,10 @@ static u8 pata_s3c_check_altstatus(struct ata_port *ap)
/*
* pata_s3c_data_xfer - Transfer data by PIO
*/
-static unsigned int pata_s3c_data_xfer(struct ata_device *dev,
+static unsigned int pata_s3c_data_xfer(struct ata_queued_cmd *qc,
unsigned char *buf, unsigned int buflen, int rw)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
struct s3c_ide_info *info = ap->host->private_data;
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 1, i;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 2f32782cea6d..00ce26d0c047 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4067,6 +4067,7 @@ static int mv_platform_probe(struct platform_device *pdev)
struct ata_host *host;
struct mv_host_priv *hpriv;
struct resource *res;
+ void __iomem *mmio;
int n_ports = 0, irq = 0;
int rc;
int port;
@@ -4085,8 +4086,9 @@ static int mv_platform_probe(struct platform_device *pdev)
* Get the register base first
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL)
- return -EINVAL;
+ mmio = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mmio))
+ return PTR_ERR(mmio);
/* allocate host */
if (pdev->dev.of_node) {
@@ -4130,12 +4132,7 @@ static int mv_platform_probe(struct platform_device *pdev)
hpriv->board_idx = chip_soc;
host->iomap = NULL;
- hpriv->base = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!hpriv->base)
- return -ENOMEM;
-
- hpriv->base -= SATAHC0_REG_BASE;
+ hpriv->base = mmio - SATAHC0_REG_BASE;
hpriv->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(hpriv->clk))
@@ -4529,7 +4526,7 @@ static void __exit mv_exit(void)
MODULE_AUTHOR("Brett Russ");
MODULE_DESCRIPTION("SCSI low-level driver for Marvell SATA controllers");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index f72d601e300a..5d38245a7a73 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -447,11 +447,11 @@ static void sata_rcar_exec_command(struct ata_port *ap,
ata_sff_pause(ap);
}
-static unsigned int sata_rcar_data_xfer(struct ata_device *dev,
+static unsigned int sata_rcar_data_xfer(struct ata_queued_cmd *qc,
unsigned char *buf,
unsigned int buflen, int rw)
{
- struct ata_port *ap = dev->link->ap;
+ struct ata_port *ap = qc->dev->link->ap;
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 1;