summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-11 23:19:09 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-11 23:19:09 +0400
commit11b84c585764155d7cc75f95f1bdc86432e5e3cb (patch)
tree2c4718ae6ec42f47d09f8e7649eef5e7a1b00f2b /drivers
parent29594404d7fe73cd80eaa4ee8c43dcc53970c60e (diff)
parent71e69211eac889898dec5a21270347591eb2d001 (diff)
downloadlinux-11b84c585764155d7cc75f95f1bdc86432e5e3cb.tar.xz
Merge tag 'mmc-updates-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball: "MMC highlights for 3.8: Core: - Expose access to the eMMC RPMB ("Replay Protected Memory Block") area by extending the existing mmc_block ioctl. - Add SDIO powered-suspend DT properties to the core MMC DT binding. - Add no-1-8-v DT flag for boards where the SD controller reports that it supports 1.8V but the board itself has no way to switch to 1.8V. - More work on switching to 1.8V UHS support using a vqmmc regulator. - Fix up a case where the slot-gpio helper may fail to reset the host controller properly if a card was removed during a transfer. - Fix several cases where a broken device could cause an infinite loop while we wait for a register to update. Drivers: - at91-mci: Remove obsolete driver, atmel-mci handles these devices now. - sdhci-dove: Allow using GPIOs for card-detect notifications. - sdhci-esdhc: Fix for recovering from ADMA errors on broken silicon. - sdhci-s3c: Add pinctrl support. - wmt-sdmmc: New driver for WonderMedia SD/MMC controllers." * tag 'mmc-updates-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (65 commits) mmc: sdhci: implement the .card_event() method mmc: extend the slot-gpio card-detection to use host's .card_event() method mmc: add a card-event host operation mmc: sdhci-s3c: Fix compilation warning mmc: sdhci-pci: Enable SDHCI_CAN_DO_HISPD for Ricoh SDHCI controller mmc: sdhci-dove: allow GPIOs to be used for card detection on Dove mmc: sdhci-dove: use two-stage initialization for sdhci-pltfm mmc: sdhci-dove: use devm_clk_get() mmc: eSDHC: Recover from ADMA errors mmc: dw_mmc: remove duplicated buswidth code mmc: dw_mmc: relocate where dw_mci_setup_bus() is called from mmc: Limit MMC speed to 52MHz if not HS200 mmc: dw_mmc: use devres functions in dw_mmc mmc: sh_mmcif: remove unneeded clock connection ID mmc: sh_mobile_sdhi: remove unneeded clock connection ID mmc: sh_mobile_sdhi: fix clock frequency printing mmc: Remove redundant null check before kfree in bus.c mmc: Remove redundant null check before kfree in sdio_bus.c mmc: sdhci-imx-esdhc: use more devm_* functions mmc: dt: add no-1-8-v device tree flag ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/card/block.c81
-rw-r--r--drivers/mmc/card/queue.c17
-rw-r--r--drivers/mmc/core/bus.c3
-rw-r--r--drivers/mmc/core/core.c32
-rw-r--r--drivers/mmc/core/debugfs.c16
-rw-r--r--drivers/mmc/core/mmc.c19
-rw-r--r--drivers/mmc/core/mmc_ops.c11
-rw-r--r--drivers/mmc/core/sdio_bus.c17
-rw-r--r--drivers/mmc/core/sdio_io.c10
-rw-r--r--drivers/mmc/core/sdio_ops.c32
-rw-r--r--drivers/mmc/core/slot-gpio.c8
-rw-r--r--drivers/mmc/host/Kconfig33
-rw-r--r--drivers/mmc/host/Makefile2
-rw-r--r--drivers/mmc/host/at91_mci.c1219
-rw-r--r--drivers/mmc/host/at91_mci.h115
-rw-r--r--drivers/mmc/host/dw_mmc-pci.c2
-rw-r--r--drivers/mmc/host/dw_mmc-pltfm.c16
-rw-r--r--drivers/mmc/host/dw_mmc.c86
-rw-r--r--drivers/mmc/host/mxcmmc.c2
-rw-r--r--drivers/mmc/host/mxs-mmc.c31
-rw-r--r--drivers/mmc/host/omap_hsmmc.c177
-rw-r--r--drivers/mmc/host/sdhci-dove.c108
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c56
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c54
-rw-r--r--drivers/mmc/host/sdhci-pci.c1
-rw-r--r--drivers/mmc/host/sdhci-pltfm.c9
-rw-r--r--drivers/mmc/host/sdhci-pxav3.c13
-rw-r--r--drivers/mmc/host/sdhci-s3c.c58
-rw-r--r--drivers/mmc/host/sdhci-spear.c9
-rw-r--r--drivers/mmc/host/sdhci.c79
-rw-r--r--drivers/mmc/host/sdhci.h5
-rw-r--r--drivers/mmc/host/sh_mmcif.c6
-rw-r--r--drivers/mmc/host/sh_mobile_sdhi.c8
-rw-r--r--drivers/mmc/host/vub300.c1
-rw-r--r--drivers/mmc/host/wmt-sdmmc.c1029
35 files changed, 1701 insertions, 1664 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 172a768036d8..21056b9ef0a0 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -57,6 +57,7 @@ MODULE_ALIAS("mmc:block");
#define INAND_CMD38_ARG_SECERASE 0x80
#define INAND_CMD38_ARG_SECTRIM1 0x81
#define INAND_CMD38_ARG_SECTRIM2 0x88
+#define MMC_BLK_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
static DEFINE_MUTEX(block_mutex);
@@ -126,6 +127,10 @@ enum mmc_blk_status {
module_param(perdev_minors, int, 0444);
MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device");
+static inline int mmc_blk_part_switch(struct mmc_card *card,
+ struct mmc_blk_data *md);
+static int get_card_status(struct mmc_card *card, u32 *status, int retries);
+
static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
{
struct mmc_blk_data *md;
@@ -357,6 +362,38 @@ out:
return ERR_PTR(err);
}
+static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status,
+ u32 retries_max)
+{
+ int err;
+ u32 retry_count = 0;
+
+ if (!status || !retries_max)
+ return -EINVAL;
+
+ do {
+ err = get_card_status(card, status, 5);
+ if (err)
+ break;
+
+ if (!R1_STATUS(*status) &&
+ (R1_CURRENT_STATE(*status) != R1_STATE_PRG))
+ break; /* RPMB programming operation complete */
+
+ /*
+ * Rechedule to give the MMC device a chance to continue
+ * processing the previous command without being polled too
+ * frequently.
+ */
+ usleep_range(1000, 5000);
+ } while (++retry_count < retries_max);
+
+ if (retry_count == retries_max)
+ err = -EPERM;
+
+ return err;
+}
+
static int mmc_blk_ioctl_cmd(struct block_device *bdev,
struct mmc_ioc_cmd __user *ic_ptr)
{
@@ -368,6 +405,8 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
struct mmc_request mrq = {NULL};
struct scatterlist sg;
int err;
+ int is_rpmb = false;
+ u32 status = 0;
/*
* The caller must have CAP_SYS_RAWIO, and must be calling this on the
@@ -387,6 +426,9 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
goto cmd_err;
}
+ if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+ is_rpmb = true;
+
card = md->queue.card;
if (IS_ERR(card)) {
err = PTR_ERR(card);
@@ -437,12 +479,23 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
mmc_claim_host(card->host);
+ err = mmc_blk_part_switch(card, md);
+ if (err)
+ goto cmd_rel_host;
+
if (idata->ic.is_acmd) {
err = mmc_app_cmd(card->host, card);
if (err)
goto cmd_rel_host;
}
+ if (is_rpmb) {
+ err = mmc_set_blockcount(card, data.blocks,
+ idata->ic.write_flag & (1 << 31));
+ if (err)
+ goto cmd_rel_host;
+ }
+
mmc_wait_for_req(card->host, &mrq);
if (cmd.error) {
@@ -478,6 +531,18 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
}
}
+ if (is_rpmb) {
+ /*
+ * Ensure RPMB command has completed by polling CMD13
+ * "Send Status".
+ */
+ err = ioctl_rpmb_card_status_poll(card, &status, 5);
+ if (err)
+ dev_err(mmc_dev(card->host),
+ "%s: Card Status=0x%08X, error %d\n",
+ __func__, status, err);
+ }
+
cmd_rel_host:
mmc_release_host(card->host);
@@ -1034,6 +1099,9 @@ static int mmc_blk_err_check(struct mmc_card *card,
*/
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
u32 status;
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(MMC_BLK_TIMEOUT_MS);
do {
int err = get_card_status(card, &status, 5);
if (err) {
@@ -1041,6 +1109,17 @@ static int mmc_blk_err_check(struct mmc_card *card,
req->rq_disk->disk_name, err);
return MMC_BLK_CMD_ERR;
}
+
+ /* Timeout if the device never becomes ready for data
+ * and never leaves the program state.
+ */
+ if (time_after(jiffies, timeout)) {
+ pr_err("%s: Card stuck in programming state!"\
+ " %s %s\n", mmc_hostname(card->host),
+ req->rq_disk->disk_name, __func__);
+
+ return MMC_BLK_CMD_ERR;
+ }
/*
* Some cards mishandle the status bits,
* so make sure to check both the busy
@@ -1504,6 +1583,8 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
md->disk->queue = md->queue.queue;
md->disk->driverfs_dev = parent;
set_disk_ro(md->disk, md->read_only || default_ro);
+ if (area_type & MMC_BLK_DATA_AREA_RPMB)
+ md->disk->flags |= GENHD_FL_NO_PART_SCAN;
/*
* As discussed on lkml, GENHD_FL_REMOVABLE should:
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index e360a979857d..fadf52eb5d70 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -68,6 +68,16 @@ static int mmc_queue_thread(void *d)
if (req || mq->mqrq_prev->req) {
set_current_state(TASK_RUNNING);
mq->issue_fn(mq, req);
+
+ /*
+ * Current request becomes previous request
+ * and vice versa.
+ */
+ mq->mqrq_prev->brq.mrq.data = NULL;
+ mq->mqrq_prev->req = NULL;
+ tmp = mq->mqrq_prev;
+ mq->mqrq_prev = mq->mqrq_cur;
+ mq->mqrq_cur = tmp;
} else {
if (kthread_should_stop()) {
set_current_state(TASK_RUNNING);
@@ -77,13 +87,6 @@ static int mmc_queue_thread(void *d)
schedule();
down(&mq->thread_sem);
}
-
- /* Current request becomes previous request and vice versa. */
- mq->mqrq_prev->brq.mrq.data = NULL;
- mq->mqrq_prev->req = NULL;
- tmp = mq->mqrq_prev;
- mq->mqrq_prev = mq->mqrq_cur;
- mq->mqrq_cur = tmp;
} while (1);
up(&mq->thread_sem);
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 9b68933f27e7..420cb6753c1e 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -225,8 +225,7 @@ static void mmc_release_card(struct device *dev)
sdio_free_common_cis(card);
- if (card->info)
- kfree(card->info);
+ kfree(card->info);
kfree(card);
}
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 06c42cfb7c34..aaed7687cf09 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -42,6 +42,9 @@
#include "sd_ops.h"
#include "sdio_ops.h"
+/* If the device is not responding */
+#define MMC_CORE_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
+
/*
* Background operations can take a long time, depending on the housekeeping
* operations the card has to perform.
@@ -1631,6 +1634,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
{
struct mmc_command cmd = {0};
unsigned int qty = 0;
+ unsigned long timeout;
int err;
/*
@@ -1708,6 +1712,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
if (mmc_host_is_spi(card->host))
goto out;
+ timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS);
do {
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_SEND_STATUS;
@@ -1721,8 +1726,19 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
err = -EIO;
goto out;
}
+
+ /* Timeout if the device never becomes ready for data and
+ * never leaves the program state.
+ */
+ if (time_after(jiffies, timeout)) {
+ pr_err("%s: Card stuck in programming state! %s\n",
+ mmc_hostname(card->host), __func__);
+ err = -EIO;
+ goto out;
+ }
+
} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
- R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG);
+ (R1_CURRENT_STATE(cmd.resp[0]) == R1_STATE_PRG));
out:
return err;
}
@@ -1942,6 +1958,20 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
}
EXPORT_SYMBOL(mmc_set_blocklen);
+int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
+ bool is_rel_write)
+{
+ struct mmc_command cmd = {0};
+
+ cmd.opcode = MMC_SET_BLOCK_COUNT;
+ cmd.arg = blockcount & 0x0000FFFF;
+ if (is_rel_write)
+ cmd.arg |= 1 << 31;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ return mmc_wait_for_cmd(card->host, &cmd, 5);
+}
+EXPORT_SYMBOL(mmc_set_blockcount);
+
static void mmc_hw_reset_for_init(struct mmc_host *host)
{
if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index d96c643dde1c..35c2f85b1956 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -144,6 +144,22 @@ static int mmc_ios_show(struct seq_file *s, void *data)
}
seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str);
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ str = "3.30 V";
+ break;
+ case MMC_SIGNAL_VOLTAGE_180:
+ str = "1.80 V";
+ break;
+ case MMC_SIGNAL_VOLTAGE_120:
+ str = "1.20 V";
+ break;
+ default:
+ str = "invalid";
+ break;
+ }
+ seq_printf(s, "signal voltage:\t%u (%s)\n", ios->chip_select, str);
+
return 0;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 7cc46382fd64..e6e39111e05b 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -239,7 +239,7 @@ static void mmc_select_card_type(struct mmc_card *card)
{
struct mmc_host *host = card->host;
u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
- unsigned int caps = host->caps, caps2 = host->caps2;
+ u32 caps = host->caps, caps2 = host->caps2;
unsigned int hs_max_dtr = 0;
if (card_type & EXT_CSD_CARD_TYPE_26)
@@ -491,6 +491,17 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION];
+
+ /*
+ * RPMB regions are defined in multiples of 128K.
+ */
+ card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT];
+ if (ext_csd[EXT_CSD_RPMB_MULT]) {
+ mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17,
+ EXT_CSD_PART_CONFIG_ACC_RPMB,
+ "rpmb", 0, false,
+ MMC_BLK_DATA_AREA_RPMB);
+ }
}
card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT];
@@ -615,6 +626,8 @@ MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
card->ext_csd.enhanced_area_offset);
MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size);
+MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
+MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
static struct attribute *mmc_std_attrs[] = {
&dev_attr_cid.attr,
@@ -630,6 +643,8 @@ static struct attribute *mmc_std_attrs[] = {
&dev_attr_serial.attr,
&dev_attr_enhanced_area_offset.attr,
&dev_attr_enhanced_area_size.attr,
+ &dev_attr_raw_rpmb_size_mult.attr,
+ &dev_attr_rel_sectors.attr,
NULL,
};
@@ -1051,6 +1066,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
if (max_dtr > card->ext_csd.hs_max_dtr)
max_dtr = card->ext_csd.hs_max_dtr;
+ if (mmc_card_highspeed(card) && (max_dtr > 52000000))
+ max_dtr = 52000000;
} else if (max_dtr > card->csd.max_dtr) {
max_dtr = card->csd.max_dtr;
}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index a0e172042e65..6d8f7012d73a 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -21,6 +21,8 @@
#include "core.h"
#include "mmc_ops.h"
+#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
+
static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
{
int err;
@@ -409,6 +411,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
{
int err;
struct mmc_command cmd = {0};
+ unsigned long timeout;
u32 status;
BUG_ON(!card);
@@ -437,6 +440,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
return 0;
/* Must check status to be sure of no errors */
+ timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
do {
err = mmc_send_status(card, &status);
if (err)
@@ -445,6 +449,13 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
break;
if (mmc_host_is_spi(card->host))
break;
+
+ /* Timeout if the device never leaves the program state. */
+ if (time_after(jiffies, timeout)) {
+ pr_err("%s: Card stuck in programming state! %s\n",
+ mmc_hostname(card->host), __func__);
+ return -ETIMEDOUT;
+ }
} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
if (mmc_host_is_spi(card->host)) {
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 6bf68799fe97..5e57048e2c1d 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -193,7 +193,21 @@ static int sdio_bus_remove(struct device *dev)
}
#ifdef CONFIG_PM
+
+#ifdef CONFIG_PM_SLEEP
+static int pm_no_operation(struct device *dev)
+{
+ /*
+ * Prevent the PM core from calling SDIO device drivers' suspend
+ * callback routines, which it is not supposed to do, by using this
+ * empty function as the bus type suspend callaback for SDIO.
+ */
+ return 0;
+}
+#endif
+
static const struct dev_pm_ops sdio_bus_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
SET_RUNTIME_PM_OPS(
pm_generic_runtime_suspend,
pm_generic_runtime_resume,
@@ -258,8 +272,7 @@ static void sdio_release_func(struct device *dev)
sdio_free_func_cis(func);
- if (func->info)
- kfree(func->info);
+ kfree(func->info);
kfree(func);
}
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 8f6f5ac131fc..78cb4d5d9d58 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -188,8 +188,7 @@ EXPORT_SYMBOL_GPL(sdio_set_block_size);
*/
static inline unsigned int sdio_max_byte_size(struct sdio_func *func)
{
- unsigned mval = min(func->card->host->max_seg_size,
- func->card->host->max_blk_size);
+ unsigned mval = func->card->host->max_blk_size;
if (mmc_blksz_for_byte_mode(func->card))
mval = min(mval, func->cur_blksize);
@@ -311,11 +310,8 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
/* Do the bulk of the transfer using block mode (if supported). */
if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) {
/* Blocks per command is limited by host count, host transfer
- * size (we only use a single sg entry) and the maximum for
- * IO_RW_EXTENDED of 511 blocks. */
- max_blocks = min(func->card->host->max_blk_count,
- func->card->host->max_seg_size / func->cur_blksize);
- max_blocks = min(max_blocks, 511u);
+ * size and the maximum for IO_RW_EXTENDED of 511 blocks. */
+ max_blocks = min(func->card->host->max_blk_count, 511u);
while (remainder >= func->cur_blksize) {
unsigned blocks;
diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
index d29e20630eed..62508b457c4f 100644
--- a/drivers/mmc/core/sdio_ops.c
+++ b/drivers/mmc/core/sdio_ops.c
@@ -124,7 +124,10 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
- struct scatterlist sg;
+ struct scatterlist sg, *sg_ptr;
+ struct sg_table sgtable;
+ unsigned int nents, left_size, i;
+ unsigned int seg_size = card->host->max_seg_size;
BUG_ON(!card);
BUG_ON(fn > 7);
@@ -152,15 +155,36 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
/* Code in host drivers/fwk assumes that "blocks" always is >=1 */
data.blocks = blocks ? blocks : 1;
data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
- data.sg = &sg;
- data.sg_len = 1;
- sg_init_one(&sg, buf, data.blksz * data.blocks);
+ left_size = data.blksz * data.blocks;
+ nents = (left_size - 1) / seg_size + 1;
+ if (nents > 1) {
+ if (sg_alloc_table(&sgtable, nents, GFP_KERNEL))
+ return -ENOMEM;
+
+ data.sg = sgtable.sgl;
+ data.sg_len = nents;
+
+ for_each_sg(data.sg, sg_ptr, data.sg_len, i) {
+ sg_set_page(sg_ptr, virt_to_page(buf + (i * seg_size)),
+ min(seg_size, left_size),
+ offset_in_page(buf + (i * seg_size)));
+ left_size = left_size - seg_size;
+ }
+ } else {
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, buf, left_size);
+ }
mmc_set_data_timeout(&data, card);
mmc_wait_for_req(card->host, &mrq);
+ if (nents > 1)
+ sg_free_table(&sgtable);
+
if (cmd.error)
return cmd.error;
if (data.error)
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index 08c6b3dfe080..16a1c0b6f264 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -27,7 +27,13 @@ struct mmc_gpio {
static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
{
/* Schedule a card detection after a debounce timeout */
- mmc_detect_change(dev_id, msecs_to_jiffies(100));
+ struct mmc_host *host = dev_id;
+
+ if (host->ops->card_event)
+ host->ops->card_event(host);
+
+ mmc_detect_change(host, msecs_to_jiffies(200));
+
return IRQ_HANDLED;
}
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 9bf10e7bbfaf..83eb1e06ff76 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -270,26 +270,8 @@ config MMC_AU1X
If unsure, say N.
-choice
- prompt "Atmel SD/MMC Driver"
- depends on AVR32 || ARCH_AT91
- default MMC_ATMELMCI if AVR32
- help
- Choose which driver to use for the Atmel MCI Silicon
-
-config MMC_AT91
- tristate "AT91 SD/MMC Card Interface support (DEPRECATED)"
- depends on ARCH_AT91
- help
- This selects the AT91 MCI controller. This driver will
- be removed soon (for more information have a look to
- Documentation/feature-removal-schedule.txt). Please use
- MMC_ATMEL_MCI.
-
- If unsure, say N.
-
config MMC_ATMELMCI
- tristate "Atmel Multimedia Card Interface support"
+ tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
depends on AVR32 || ARCH_AT91
help
This selects the Atmel Multimedia Card Interface driver. If
@@ -298,8 +280,6 @@ config MMC_ATMELMCI
If unsure, say N.
-endchoice
-
config MMC_ATMELMCI_DMA
bool "Atmel MCI DMA support"
depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
@@ -621,3 +601,14 @@ config MMC_USHC
Note: These controllers only support SDIO cards and do not
support MMC or SD memory cards.
+
+config MMC_WMT
+ tristate "Wondermedia SD/MMC Host Controller support"
+ depends on ARCH_VT8500
+ default y
+ help
+ This selects support for the SD/MMC Host Controller on
+ Wondermedia WM8505/WM8650 based SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wmt-sdmmc.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 17ad0a7ba40b..39d5e1234709 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
-obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_MSM) += msm_sdcc.o
@@ -45,6 +44,7 @@ obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
obj-$(CONFIG_MMC_VUB300) += vub300.o
obj-$(CONFIG_MMC_USHC) += ushc.o
+obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
deleted file mode 100644
index 74bed0fc23e7..000000000000
--- a/drivers/mmc/host/at91_mci.c
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- * linux/drivers/mmc/host/at91_mci.c - ATMEL AT91 MCI Driver
- *
- * Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
- *
- * Copyright (C) 2006 Malcolm Noyes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- This is the AT91 MCI driver that has been tested with both MMC cards
- and SD-cards. Boards that support write protect are now supported.
- The CCAT91SBC001 board does not support SD cards.
-
- The three entry points are at91_mci_request, at91_mci_set_ios
- and at91_mci_get_ro.
-
- SET IOS
- This configures the device to put it into the correct mode and clock speed
- required.
-
- MCI REQUEST
- MCI request processes the commands sent in the mmc_request structure. This
- can consist of a processing command and a stop command in the case of
- multiple block transfers.
-
- There are three main types of request, commands, reads and writes.
-
- Commands are straight forward. The command is submitted to the controller and
- the request function returns. When the controller generates an interrupt to indicate
- the command is finished, the response to the command are read and the mmc_request_done
- function called to end the request.
-
- Reads and writes work in a similar manner to normal commands but involve the PDC (DMA)
- controller to manage the transfers.
-
- A read is done from the controller directly to the scatterlist passed in from the request.
- Due to a bug in the AT91RM9200 controller, when a read is completed, all the words are byte
- swapped in the scatterlist buffers. AT91SAM926x are not affected by this bug.
-
- The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
-
- A write is slightly different in that the bytes to write are read from the scatterlist
- into a dma memory buffer (this is in case the source buffer should be read only). The
- entire write buffer is then done from this single dma memory buffer.
-
- The sequence of write interrupts is: ENDTX, TXBUFE, NOTBUSY, CMDRDY
-
- GET RO
- Gets the status of the write protect pin, if available.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/atmel_pdc.h>
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/sdio.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/gpio.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-
-#include "at91_mci.h"
-
-#define DRIVER_NAME "at91_mci"
-
-static inline int at91mci_is_mci1rev2xx(void)
-{
- return ( cpu_is_at91sam9260()
- || cpu_is_at91sam9263()
- || cpu_is_at91sam9rl()
- || cpu_is_at91sam9g10()
- || cpu_is_at91sam9g20()
- );
-}
-
-#define FL_SENT_COMMAND (1 << 0)
-#define FL_SENT_STOP (1 << 1)
-
-#define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \
- | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \
- | AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
-
-#define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
-#define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
-
-#define MCI_BLKSIZE 512
-#define MCI_MAXBLKSIZE 4095
-#define MCI_BLKATONCE 256
-#define MCI_BUFSIZE (MCI_BLKSIZE * MCI_BLKATONCE)
-
-/*
- * Low level type for this driver
- */
-struct at91mci_host
-{
- struct mmc_host *mmc;
- struct mmc_command *cmd;
- struct mmc_request *request;
-
- void __iomem *baseaddr;
- int irq;
-
- struct at91_mmc_data *board;
- int present;
-
- struct clk *mci_clk;
-
- /*
- * Flag indicating when the command has been sent. This is used to
- * work out whether or not to send the stop
- */
- unsigned int flags;
- /* flag for current bus settings */
- u32 bus_mode;
-
- /* DMA buffer used for transmitting */
- unsigned int* buffer;
- dma_addr_t physical_address;
- unsigned int total_length;
-
- /* Latest in the scatterlist that has been enabled for transfer, but not freed */
- int in_use_index;
-
- /* Latest in the scatterlist that has been enabled for transfer */
- int transfer_index;
-
- /* Timer for timeouts */
- struct timer_list timer;
-};
-
-/*
- * Reset the controller and restore most of the state
- */
-static void at91_reset_host(struct at91mci_host *host)
-{
- unsigned long flags;
- u32 mr;
- u32 sdcr;
- u32 dtor;
- u32 imr;
-
- local_irq_save(flags);
- imr = at91_mci_read(host, AT91_MCI_IMR);
-
- at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-
- /* save current state */
- mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
- sdcr = at91_mci_read(host, AT91_MCI_SDCR);
- dtor = at91_mci_read(host, AT91_MCI_DTOR);
-
- /* reset the controller */
- at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
-
- /* restore state */
- at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
- at91_mci_write(host, AT91_MCI_MR, mr);
- at91_mci_write(host, AT91_MCI_SDCR, sdcr);
- at91_mci_write(host, AT91_MCI_DTOR, dtor);
- at91_mci_write(host, AT91_MCI_IER, imr);
-
- /* make sure sdio interrupts will fire */
- at91_mci_read(host, AT91_MCI_SR);
-
- local_irq_restore(flags);
-}
-
-static void at91_timeout_timer(unsigned long data)
-{
- struct at91mci_host *host;
-
- host = (struct at91mci_host *)data;
-
- if (host->request) {
- dev_err(host->mmc->parent, "Timeout waiting end of packet\n");
-
- if (host->cmd && host->cmd->data) {
- host->cmd->data->error = -ETIMEDOUT;
- } else {
- if (host->cmd)
- host->cmd->error = -ETIMEDOUT;
- else
- host->request->cmd->error = -ETIMEDOUT;
- }
-
- at91_reset_host(host);
- mmc_request_done(host->mmc, host->request);
- }
-}
-
-/*
- * Copy from sg to a dma block - used for transfers
- */
-static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
-{
- unsigned int len, i, size;
- unsigned *dmabuf = host->buffer;
-
- size = data->blksz * data->blocks;
- len = data->sg_len;
-
- /* MCI1 rev2xx Data Write Operation and number of bytes erratum */
- if (at91mci_is_mci1rev2xx())
- if (host->total_length == 12)
- memset(dmabuf, 0, 12);
-
- /*
- * Just loop through all entries. Size might not
- * be the entire list though so make sure that
- * we do not transfer too much.
- */
- for (i = 0; i < len; i++) {
- struct scatterlist *sg;
- int amount;
- unsigned int *sgbuffer;
-
- sg = &data->sg[i];
-
- sgbuffer = kmap_atomic(sg_page(sg)) + sg->offset;
- amount = min(size, sg->length);
- size -= amount;
-
- if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */
- int index;
-
- for (index = 0; index < (amount / 4); index++)
- *dmabuf++ = swab32(sgbuffer[index]);
- } else {
- char *tmpv = (char *)dmabuf;
- memcpy(tmpv, sgbuffer, amount);
- tmpv += amount;
- dmabuf = (unsigned *)tmpv;
- }
-
- kunmap_atomic(sgbuffer);
-
- if (size == 0)
- break;
- }
-
- /*
- * Check that we didn't get a request to transfer
- * more data than can fit into the SG list.
- */
- BUG_ON(size != 0);
-}
-
-/*
- * Handle after a dma read
- */
-static void at91_mci_post_dma_read(struct at91mci_host *host)
-{
- struct mmc_command *cmd;
- struct mmc_data *data;
- unsigned int len, i, size;
- unsigned *dmabuf = host->buffer;
-
- pr_debug("post dma read\n");
-
- cmd = host->cmd;
- if (!cmd) {
- pr_debug("no command\n");
- return;
- }
-
- data = cmd->data;
- if (!data) {
- pr_debug("no data\n");
- return;
- }
-
- size = data->blksz * data->blocks;
- len = data->sg_len;
-
- at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX);
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
-
- for (i = 0; i < len; i++) {
- struct scatterlist *sg;
- int amount;
- unsigned int *sgbuffer;
-
- sg = &data->sg[i];
-
- sgbuffer = kmap_atomic(sg_page(sg)) + sg->offset;
- amount = min(size, sg->length);
- size -= amount;
-
- if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */
- int index;
- for (index = 0; index < (amount / 4); index++)
- sgbuffer[index] = swab32(*dmabuf++);
- } else {
- char *tmpv = (char *)dmabuf;
- memcpy(sgbuffer, tmpv, amount);
- tmpv += amount;
- dmabuf = (unsigned *)tmpv;
- }
-
- flush_kernel_dcache_page(sg_page(sg));
- kunmap_atomic(sgbuffer);
- data->bytes_xfered += amount;
- if (size == 0)
- break;
- }
-
- pr_debug("post dma read done\n");
-}
-
-/*
- * Handle transmitted data
- */
-static void at91_mci_handle_transmitted(struct at91mci_host *host)
-{
- struct mmc_command *cmd;
- struct mmc_data *data;
-
- pr_debug("Handling the transmit\n");
-
- /* Disable the transfer */
- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
- /* Now wait for cmd ready */
- at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-
- cmd = host->cmd;
- if (!cmd) return;
-
- data = cmd->data;
- if (!data) return;
-
- if (cmd->data->blocks > 1) {
- pr_debug("multiple write : wait for BLKE...\n");
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
- } else
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-}
-
-/*
- * Update bytes transfered count during a write operation
- */
-static void at91_mci_update_bytes_xfered(struct at91mci_host *host)
-{
- struct mmc_data *data;
-
- /* always deal with the effective request (and not the current cmd) */
-
- if (host->request->cmd && host->request->cmd->error != 0)
- return;
-
- if (host->request->data) {
- data = host->request->data;
- if (data->flags & MMC_DATA_WRITE) {
- /* card is in IDLE mode now */
- pr_debug("-> bytes_xfered %d, total_length = %d\n",
- data->bytes_xfered, host->total_length);
- data->bytes_xfered = data->blksz * data->blocks;
- }
- }
-}
-
-
-/*Handle after command sent ready*/
-static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
-{
- if (!host->cmd)
- return 1;
- else if (!host->cmd->data) {
- if (host->flags & FL_SENT_STOP) {
- /*After multi block write, we must wait for NOTBUSY*/
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
- } else return 1;
- } else if (host->cmd->data->flags & MMC_DATA_WRITE) {
- /*After sendding multi-block-write command, start DMA transfer*/
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE);
- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
- }
-
- /* command not completed, have to wait */
- return 0;
-}
-
-
-/*
- * Enable the controller
- */
-static void at91_mci_enable(struct at91mci_host *host)
-{
- unsigned int mr;
-
- at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
- at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
- at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
- mr = AT91_MCI_PDCMODE | 0x34a;
-
- if (at91mci_is_mci1rev2xx())
- mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF;
-
- at91_mci_write(host, AT91_MCI_MR, mr);
-
- /* use Slot A or B (only one at same time) */
- at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
-}
-
-/*
- * Disable the controller
- */
-static void at91_mci_disable(struct at91mci_host *host)
-{
- at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
-}
-
-/*
- * Send a command
- */
-static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
-{
- unsigned int cmdr, mr;
- unsigned int block_length;
- struct mmc_data *data = cmd->data;
-
- unsigned int blocks;
- unsigned int ier = 0;
-
- host->cmd = cmd;
-
- /* Needed for leaving busy state before CMD1 */
- if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
- pr_debug("Clearing timeout\n");
- at91_mci_write(host, AT91_MCI_ARGR, 0);
- at91_mci_write(host, AT91_MCI_CMDR, AT91_MCI_OPDCMD);
- while (!(at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
- /* spin */
- pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
- }
- }
-
- cmdr = cmd->opcode;
-
- if (mmc_resp_type(cmd) == MMC_RSP_NONE)
- cmdr |= AT91_MCI_RSPTYP_NONE;
- else {
- /* if a response is expected then allow maximum response latancy */
- cmdr |= AT91_MCI_MAXLAT;
- /* set 136 bit response for R2, 48 bit response otherwise */
- if (mmc_resp_type(cmd) == MMC_RSP_R2)
- cmdr |= AT91_MCI_RSPTYP_136;
- else
- cmdr |= AT91_MCI_RSPTYP_48;
- }
-
- if (data) {
-
- if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) {
- if (data->blksz & 0x3) {
- pr_debug("Unsupported block size\n");
- cmd->error = -EINVAL;
- mmc_request_done(host->mmc, host->request);
- return;
- }
- if (data->flags & MMC_DATA_STREAM) {
- pr_debug("Stream commands not supported\n");
- cmd->error = -EINVAL;
- mmc_request_done(host->mmc, host->request);
- return;
- }
- }
-
- block_length = data->blksz;
- blocks = data->blocks;
-
- /* always set data start - also set direction flag for read */
- if (data->flags & MMC_DATA_READ)
- cmdr |= (AT91_MCI_TRDIR | AT91_MCI_TRCMD_START);
- else if (data->flags & MMC_DATA_WRITE)
- cmdr |= AT91_MCI_TRCMD_START;
-
- if (cmd->opcode == SD_IO_RW_EXTENDED) {
- cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
- } else {
- if (data->flags & MMC_DATA_STREAM)
- cmdr |= AT91_MCI_TRTYP_STREAM;
- if (data->blocks > 1)
- cmdr |= AT91_MCI_TRTYP_MULTIPLE;
- }
- }
- else {
- block_length = 0;
- blocks = 0;
- }
-
- if (host->flags & FL_SENT_STOP)
- cmdr |= AT91_MCI_TRCMD_STOP;
-
- if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
- cmdr |= AT91_MCI_OPDCMD;
-
- /*
- * Set the arguments and send the command
- */
- pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
- cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
-
- if (!data) {
- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
- at91_mci_write(host, ATMEL_PDC_RPR, 0);
- at91_mci_write(host, ATMEL_PDC_RCR, 0);
- at91_mci_write(host, ATMEL_PDC_RNPR, 0);
- at91_mci_write(host, ATMEL_PDC_RNCR, 0);
- at91_mci_write(host, ATMEL_PDC_TPR, 0);
- at91_mci_write(host, ATMEL_PDC_TCR, 0);
- at91_mci_write(host, ATMEL_PDC_TNPR, 0);
- at91_mci_write(host, ATMEL_PDC_TNCR, 0);
- ier = AT91_MCI_CMDRDY;
- } else {
- /* zero block length and PDC mode */
- mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff;
- mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0;
- mr |= (block_length << 16);
- mr |= AT91_MCI_PDCMODE;
- at91_mci_write(host, AT91_MCI_MR, mr);
-
- if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261()))
- at91_mci_write(host, AT91_MCI_BLKR,
- AT91_MCI_BLKR_BCNT(blocks) |
- AT91_MCI_BLKR_BLKLEN(block_length));
-
- /*
- * Disable the PDC controller
- */
- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
- if (cmdr & AT91_MCI_TRCMD_START) {
- data->bytes_xfered = 0;
- host->transfer_index = 0;
- host->in_use_index = 0;
- if (cmdr & AT91_MCI_TRDIR) {
- /*
- * Handle a read
- */
- host->total_length = 0;
-
- at91_mci_write(host, ATMEL_PDC_RPR, host->physical_address);
- at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ?
- (blocks * block_length) : (blocks * block_length) / 4);
- at91_mci_write(host, ATMEL_PDC_RNPR, 0);
- at91_mci_write(host, ATMEL_PDC_RNCR, 0);
-
- ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
- }
- else {
- /*
- * Handle a write
- */
- host->total_length = block_length * blocks;
- /*
- * MCI1 rev2xx Data Write Operation and
- * number of bytes erratum
- */
- if (at91mci_is_mci1rev2xx())
- if (host->total_length < 12)
- host->total_length = 12;
-
- at91_mci_sg_to_dma(host, data);
-
- pr_debug("Transmitting %d bytes\n", host->total_length);
-
- at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
- at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ?
- host->total_length : host->total_length / 4);
-
- ier = AT91_MCI_CMDRDY;
- }
- }
- }
-
- /*
- * Send the command and then enable the PDC - not the other way round as
- * the data sheet says
- */
-
- at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
- at91_mci_write(host, AT91_MCI_CMDR, cmdr);
-
- if (cmdr & AT91_MCI_TRCMD_START) {
- if (cmdr & AT91_MCI_TRDIR)
- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
- }
-
- /* Enable selected interrupts */
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
-}
-
-/*
- * Process the next step in the request
- */
-static void at91_mci_process_next(struct at91mci_host *host)
-{
- if (!(host->flags & FL_SENT_COMMAND)) {
- host->flags |= FL_SENT_COMMAND;
- at91_mci_send_command(host, host->request->cmd);
- }
- else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
- host->flags |= FL_SENT_STOP;
- at91_mci_send_command(host, host->request->stop);
- } else {
- del_timer(&host->timer);
- /* the at91rm9200 mci controller hangs after some transfers,
- * and the workaround is to reset it after each transfer.
- */
- if (cpu_is_at91rm9200())
- at91_reset_host(host);
- mmc_request_done(host->mmc, host->request);
- }
-}
-
-/*
- * Handle a command that has been completed
- */
-static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status)
-{
- struct mmc_command *cmd = host->cmd;
- struct mmc_data *data = cmd->data;
-
- at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
-
- cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0));
- cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1));
- cmd->resp[2] = at91_mci_read(host, AT91_MCI_RSPR(2));
- cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
-
- pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n",
- status, at91_mci_read(host, AT91_MCI_SR),
- cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
-
- if (status & AT91_MCI_ERRORS) {
- if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) {
- cmd->error = 0;
- }
- else {
- if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) {
- if (data) {
- if (status & AT91_MCI_DTOE)
- data->error = -ETIMEDOUT;
- else if (status & AT91_MCI_DCRCE)
- data->error = -EILSEQ;
- }
- } else {
- if (status & AT91_MCI_RTOE)
- cmd->error = -ETIMEDOUT;
- else if (status & AT91_MCI_RCRCE)
- cmd->error = -EILSEQ;
- else
- cmd->error = -EIO;
- }
-
- pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n",
- cmd->error, data ? data->error : 0,
- cmd->opcode, cmd->retries);
- }
- }
- else
- cmd->error = 0;
-
- at91_mci_process_next(host);
-}
-
-/*
- * Handle an MMC request
- */
-static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
- struct at91mci_host *host = mmc_priv(mmc);
- host->request = mrq;
- host->flags = 0;
-
- /* more than 1s timeout needed with slow SD cards */
- mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000));
-
- at91_mci_process_next(host);
-}
-
-/*
- * Set the IOS
- */
-static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
- int clkdiv;
- struct at91mci_host *host = mmc_priv(mmc);
- unsigned long at91_master_clock = clk_get_rate(host->mci_clk);
-
- host->bus_mode = ios->bus_mode;
-
- if (ios->clock == 0) {
- /* Disable the MCI controller */
- at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS);
- clkdiv = 0;
- }
- else {
- /* Enable the MCI controller */
- at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
-
- if ((at91_master_clock % (ios->clock * 2)) == 0)
- clkdiv = ((at91_master_clock / ios->clock) / 2) - 1;
- else
- clkdiv = (at91_master_clock / ios->clock) / 2;
-
- pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
- at91_master_clock / (2 * (clkdiv + 1)));
- }
- if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
- pr_debug("MMC: Setting controller bus width to 4\n");
- at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
- }
- else {
- pr_debug("MMC: Setting controller bus width to 1\n");
- at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
- }
-
- /* Set the clock divider */
- at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
-
- /* maybe switch power to the card */
- if (gpio_is_valid(host->board->vcc_pin)) {
- switch (ios->power_mode) {
- case MMC_POWER_OFF:
- gpio_set_value(host->board->vcc_pin, 0);
- break;
- case MMC_POWER_UP:
- gpio_set_value(host->board->vcc_pin, 1);
- break;
- case MMC_POWER_ON:
- break;
- default:
- WARN_ON(1);
- }
- }
-}
-
-/*
- * Handle an interrupt
- */
-static irqreturn_t at91_mci_irq(int irq, void *devid)
-{
- struct at91mci_host *host = devid;
- int completed = 0;
- unsigned int int_status, int_mask;
-
- int_status = at91_mci_read(host, AT91_MCI_SR);
- int_mask = at91_mci_read(host, AT91_MCI_IMR);
-
- pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
- int_status & int_mask);
-
- int_status = int_status & int_mask;
-
- if (int_status & AT91_MCI_ERRORS) {
- completed = 1;
-
- if (int_status & AT91_MCI_UNRE)
- pr_debug("MMC: Underrun error\n");
- if (int_status & AT91_MCI_OVRE)
- pr_debug("MMC: Overrun error\n");
- if (int_status & AT91_MCI_DTOE)
- pr_debug("MMC: Data timeout\n");
- if (int_status & AT91_MCI_DCRCE)
- pr_debug("MMC: CRC error in data\n");
- if (int_status & AT91_MCI_RTOE)
- pr_debug("MMC: Response timeout\n");
- if (int_status & AT91_MCI_RENDE)
- pr_debug("MMC: Response end bit error\n");
- if (int_status & AT91_MCI_RCRCE)
- pr_debug("MMC: Response CRC error\n");
- if (int_status & AT91_MCI_RDIRE)
- pr_debug("MMC: Response direction error\n");
- if (int_status & AT91_MCI_RINDE)
- pr_debug("MMC: Response index error\n");
- } else {
- /* Only continue processing if no errors */
-
- if (int_status & AT91_MCI_TXBUFE) {
- pr_debug("TX buffer empty\n");
- at91_mci_handle_transmitted(host);
- }
-
- if (int_status & AT91_MCI_ENDRX) {
- pr_debug("ENDRX\n");
- at91_mci_post_dma_read(host);
- }
-
- if (int_status & AT91_MCI_RXBUFF) {
- pr_debug("RX buffer full\n");
- at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
- at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_RXBUFF | AT91_MCI_ENDRX);
- completed = 1;
- }
-
- if (int_status & AT91_MCI_ENDTX)
- pr_debug("Transmit has ended\n");
-
- if (int_status & AT91_MCI_NOTBUSY) {
- pr_debug("Card is ready\n");
- at91_mci_update_bytes_xfered(host);
- completed = 1;
- }
-
- if (int_status & AT91_MCI_DTIP)
- pr_debug("Data transfer in progress\n");
-
- if (int_status & AT91_MCI_BLKE) {
- pr_debug("Block transfer has ended\n");
- if (host->request->data && host->request->data->blocks > 1) {
- /* multi block write : complete multi write
- * command and send stop */
- completed = 1;
- } else {
- at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
- }
- }
-
- if (int_status & AT91_MCI_SDIOIRQA)
- mmc_signal_sdio_irq(host->mmc);
-
- if (int_status & AT91_MCI_SDIOIRQB)
- mmc_signal_sdio_irq(host->mmc);
-
- if (int_status & AT91_MCI_TXRDY)
- pr_debug("Ready to transmit\n");
-
- if (int_status & AT91_MCI_RXRDY)
- pr_debug("Ready to receive\n");
-
- if (int_status & AT91_MCI_CMDRDY) {
- pr_debug("Command ready\n");
- completed = at91_mci_handle_cmdrdy(host);
- }
- }
-
- if (completed) {
- pr_debug("Completed command\n");
- at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
- at91_mci_completed_command(host, int_status);
- } else
- at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
-{
- struct at91mci_host *host = _host;
- int present;
-
- /* entering this ISR means that we have configured det_pin:
- * we can use its value in board structure */
- present = !gpio_get_value(host->board->det_pin);
-
- /*
- * we expect this irq on both insert and remove,
- * and use a short delay to debounce.
- */
- if (present != host->present) {
- host->present = present;
- pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
- present ? "insert" : "remove");
- if (!present) {
- pr_debug("****** Resetting SD-card bus width ******\n");
- at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
- }
- /* 0.5s needed because of early card detect switch firing */
- mmc_detect_change(host->mmc, msecs_to_jiffies(500));
- }
- return IRQ_HANDLED;
-}
-
-static int at91_mci_get_ro(struct mmc_host *mmc)
-{
- struct at91mci_host *host = mmc_priv(mmc);
-
- if (gpio_is_valid(host->board->wp_pin))
- return !!gpio_get_value(host->board->wp_pin);
- /*
- * Board doesn't support read only detection; let the mmc core
- * decide what to do.
- */
- return -ENOSYS;
-}
-
-static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable)
-{
- struct at91mci_host *host = mmc_priv(mmc);
-
- pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc),
- host->board->slot_b ? 'B':'A', enable ? "enable" : "disable");
- at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR,
- host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA);
-
-}
-
-static const struct mmc_host_ops at91_mci_ops = {
- .request = at91_mci_request,
- .set_ios = at91_mci_set_ios,
- .get_ro = at91_mci_get_ro,
- .enable_sdio_irq = at91_mci_enable_sdio_irq,
-};
-
-/*
- * Probe for the device
- */
-static int __init at91_mci_probe(struct platform_device *pdev)
-{
- struct mmc_host *mmc;
- struct at91mci_host *host;
- struct resource *res;
- int ret;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENXIO;
-
- if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME))
- return -EBUSY;
-
- mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
- if (!mmc) {
- ret = -ENOMEM;
- dev_dbg(&pdev->dev, "couldn't allocate mmc host\n");
- goto fail6;
- }
-
- mmc->ops = &at91_mci_ops;
- mmc->f_min = 375000;
- mmc->f_max = 25000000;
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = 0;
-
- mmc->max_blk_size = MCI_MAXBLKSIZE;
- mmc->max_blk_count = MCI_BLKATONCE;
- mmc->max_req_size = MCI_BUFSIZE;
- mmc->max_segs = MCI_BLKATONCE;
- mmc->max_seg_size = MCI_BUFSIZE;
-
- host = mmc_priv(mmc);
- host->mmc = mmc;
- host->bus_mode = 0;
- host->board = pdev->dev.platform_data;
- if (host->board->wire4) {
- if (at91mci_is_mci1rev2xx())
- mmc->caps |= MMC_CAP_4_BIT_DATA;
- else
- dev_warn(&pdev->dev, "4 wire bus mode not supported"
- " - using 1 wire\n");
- }
-
- host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE,
- &host->physical_address, GFP_KERNEL);
- if (!host->buffer) {
- ret = -ENOMEM;
- dev_err(&pdev->dev, "Can't allocate transmit buffer\n");
- goto fail5;
- }
-
- /* Add SDIO capability when available */
- if (at91mci_is_mci1rev2xx()) {
- /* at91mci MCI1 rev2xx sdio interrupt erratum */
- if (host->board->wire4 || !host->board->slot_b)
- mmc->caps |= MMC_CAP_SDIO_IRQ;
- }
-
- /*
- * Reserve GPIOs ... board init code makes sure these pins are set
- * up as GPIOs with the right direction (input, except for vcc)
- */
- if (gpio_is_valid(host->board->det_pin)) {
- ret = gpio_request(host->board->det_pin, "mmc_detect");
- if (ret < 0) {
- dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
- goto fail4b;
- }
- }
- if (gpio_is_valid(host->board->wp_pin)) {
- ret = gpio_request(host->board->wp_pin, "mmc_wp");
- if (ret < 0) {
- dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
- goto fail4;
- }
- }
- if (gpio_is_valid(host->board->vcc_pin)) {
- ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
- if (ret < 0) {
- dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
- goto fail3;
- }
- }
-
- /*
- * Get Clock
- */
- host->mci_clk = clk_get(&pdev->dev, "mci_clk");
- if (IS_ERR(host->mci_clk)) {
- ret = -ENODEV;
- dev_dbg(&pdev->dev, "no mci_clk?\n");
- goto fail2;
- }
-
- /*
- * Map I/O region
- */
- host->baseaddr = ioremap(res->start, resource_size(res));
- if (!host->baseaddr) {
- ret = -ENOMEM;
- goto fail1;
- }
-
- /*
- * Reset hardware
- */
- clk_enable(host->mci_clk); /* Enable the peripheral clock */
- at91_mci_disable(host);
- at91_mci_enable(host);
-
- /*
- * Allocate the MCI interrupt
- */
- host->irq = platform_get_irq(pdev, 0);
- ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED,
- mmc_hostname(mmc), host);
- if (ret) {
- dev_dbg(&pdev->dev, "request MCI interrupt failed\n");
- goto fail0;
- }
-
- setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host);
-
- platform_set_drvdata(pdev, mmc);
-
- /*
- * Add host to MMC layer
- */
- if (gpio_is_valid(host->board->det_pin)) {
- host->present = !gpio_get_value(host->board->det_pin);
- }
- else
- host->present = -1;
-
- mmc_add_host(mmc);
-
- /*
- * monitor card insertion/removal if we can
- */
- if (gpio_is_valid(host->board->det_pin)) {
- ret = request_irq(gpio_to_irq(host->board->det_pin),
- at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
- if (ret)
- dev_warn(&pdev->dev, "request MMC detect irq failed\n");
- else
- device_init_wakeup(&pdev->dev, 1);
- }
-
- pr_debug("Added MCI driver\n");
-
- return 0;
-
-fail0:
- clk_disable(host->mci_clk);
- iounmap(host->baseaddr);
-fail1:
- clk_put(host->mci_clk);
-fail2:
- if (gpio_is_valid(host->board->vcc_pin))
- gpio_free(host->board->vcc_pin);
-fail3:
- if (gpio_is_valid(host->board->wp_pin))
- gpio_free(host->board->wp_pin);
-fail4:
- if (gpio_is_valid(host->board->det_pin))
- gpio_free(host->board->det_pin);
-fail4b:
- if (host->buffer)
- dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
- host->buffer, host->physical_address);
-fail5:
- mmc_free_host(mmc);
-fail6:
- release_mem_region(res->start, resource_size(res));
- dev_err(&pdev->dev, "probe failed, err %d\n", ret);
- return ret;
-}
-
-/*
- * Remove a device
- */
-static int __exit at91_mci_remove(struct platform_device *pdev)
-{
- struct mmc_host *mmc = platform_get_drvdata(pdev);
- struct at91mci_host *host;
- struct resource *res;
-
- if (!mmc)
- return -1;
-
- host = mmc_priv(mmc);
-
- if (host->buffer)
- dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
- host->buffer, host->physical_address);
-
- if (gpio_is_valid(host->board->det_pin)) {
- if (device_can_wakeup(&pdev->dev))
- free_irq(gpio_to_irq(host->board->det_pin), host);
- device_init_wakeup(&pdev->dev, 0);
- gpio_free(host->board->det_pin);
- }
-
- at91_mci_disable(host);
- del_timer_sync(&host->timer);
- mmc_remove_host(mmc);
- free_irq(host->irq, host);
-
- clk_disable(host->mci_clk); /* Disable the peripheral clock */
- clk_put(host->mci_clk);
-
- if (gpio_is_valid(host->board->vcc_pin))
- gpio_free(host->board->vcc_pin);
- if (gpio_is_valid(host->board->wp_pin))
- gpio_free(host->board->wp_pin);
-
- iounmap(host->baseaddr);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
-
- mmc_free_host(mmc);
- platform_set_drvdata(pdev, NULL);
- pr_debug("MCI Removed\n");
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct mmc_host *mmc = platform_get_drvdata(pdev);
- struct at91mci_host *host = mmc_priv(mmc);
- int ret = 0;
-
- if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
- enable_irq_wake(host->board->det_pin);
-
- if (mmc)
- ret = mmc_suspend_host(mmc);
-
- return ret;
-}
-
-static int at91_mci_resume(struct platform_device *pdev)
-{
- struct mmc_host *mmc = platform_get_drvdata(pdev);
- struct at91mci_host *host = mmc_priv(mmc);
- int ret = 0;
-
- if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
- disable_irq_wake(host->board->det_pin);
-
- if (mmc)
- ret = mmc_resume_host(mmc);
-
- return ret;
-}
-#else
-#define at91_mci_suspend NULL
-#define at91_mci_resume NULL
-#endif
-
-static struct platform_driver at91_mci_driver = {
- .remove = __exit_p(at91_mci_remove),
- .suspend = at91_mci_suspend,
- .resume = at91_mci_resume,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init at91_mci_init(void)
-{
- return platform_driver_probe(&at91_mci_driver, at91_mci_probe);
-}
-
-static void __exit at91_mci_exit(void)
-{
- platform_driver_unregister(&at91_mci_driver);
-}
-
-module_init(at91_mci_init);
-module_exit(at91_mci_exit);
-
-MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver");
-MODULE_AUTHOR("Nick Randell");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_mci");
diff --git a/drivers/mmc/host/at91_mci.h b/drivers/mmc/host/at91_mci.h
deleted file mode 100644
index eec3a6b1c2bc..000000000000
--- a/drivers/mmc/host/at91_mci.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * drivers/mmc/host/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR 0x00 /* Control Register */
-#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
-#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
-#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
-#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
-#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
-
-#define AT91_MCI_MR 0x04 /* Mode Register */
-#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
-#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
-#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */
-#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */
-#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */
-#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
-#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
-#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
-
-#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
-#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
-#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
-#define AT91_MCI_DTOMUL_1 (0 << 4)
-#define AT91_MCI_DTOMUL_16 (1 << 4)
-#define AT91_MCI_DTOMUL_128 (2 << 4)
-#define AT91_MCI_DTOMUL_256 (3 << 4)
-#define AT91_MCI_DTOMUL_1K (4 << 4)
-#define AT91_MCI_DTOMUL_4K (5 << 4)
-#define AT91_MCI_DTOMUL_64K (6 << 4)
-#define AT91_MCI_DTOMUL_1M (7 << 4)
-
-#define AT91_MCI_SDCR 0x0c /* SD Card Register */
-#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
-#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR 0x10 /* Argument Register */
-
-#define AT91_MCI_CMDR 0x14 /* Command Register */
-#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
-#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
-#define AT91_MCI_RSPTYP_NONE (0 << 6)
-#define AT91_MCI_RSPTYP_48 (1 << 6)
-#define AT91_MCI_RSPTYP_136 (2 << 6)
-#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
-#define AT91_MCI_SPCMD_NONE (0 << 8)
-#define AT91_MCI_SPCMD_INIT (1 << 8)
-#define AT91_MCI_SPCMD_SYNC (2 << 8)
-#define AT91_MCI_SPCMD_ICMD (4 << 8)
-#define AT91_MCI_SPCMD_IRESP (5 << 8)
-#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
-#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
-#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
-#define AT91_MCI_TRCMD_NONE (0 << 16)
-#define AT91_MCI_TRCMD_START (1 << 16)
-#define AT91_MCI_TRCMD_STOP (2 << 16)
-#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
-#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
-#define AT91_MCI_TRTYP_BLOCK (0 << 19)
-#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
-#define AT91_MCI_TRTYP_STREAM (2 << 19)
-#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19)
-#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19)
-
-#define AT91_MCI_BLKR 0x18 /* Block Register */
-#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
-#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block length */
-
-#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
-#define AT91_MCR_RDR 0x30 /* Receive Data Register */
-#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
-
-#define AT91_MCI_SR 0x40 /* Status Register */
-#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
-#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
-#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
-#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
-#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
-#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
-#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
-#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
-#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
-#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */
-#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
-#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
-#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
-#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
-#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
-#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
-#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */
-#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
-#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
-#define AT91_MCI_OVRE (1 << 30) /* Overrun */
-#define AT91_MCI_UNRE (1 << 31) /* Underrun */
-
-#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
-#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
-#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
-
-#endif
diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c
index edb37e9135ae..53a09cbb2c7c 100644
--- a/drivers/mmc/host/dw_mmc-pci.c
+++ b/drivers/mmc/host/dw_mmc-pci.c
@@ -134,7 +134,7 @@ static struct pci_driver dw_mci_pci_driver = {
.name = "dw_mmc_pci",
.id_table = dw_mci_pci_id,
.probe = dw_mci_pci_probe,
- .remove = dw_mci_pci_remove,
+ .remove = __devexit_p(dw_mci_pci_remove),
.driver = {
.pm = &dw_mci_pci_pmops
},
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 917936bee5d5..4e133709e33d 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -119,7 +119,8 @@ static const struct of_device_id dw_mci_pltfm_match[] = {
MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
static struct platform_driver dw_mci_pltfm_driver = {
- .remove = __exit_p(dw_mci_pltfm_remove),
+ .probe = dw_mci_pltfm_probe,
+ .remove = __devexit_p(dw_mci_pltfm_remove),
.driver = {
.name = "dw_mmc",
.of_match_table = of_match_ptr(dw_mci_pltfm_match),
@@ -127,18 +128,7 @@ static struct platform_driver dw_mci_pltfm_driver = {
},
};
-static int __init dw_mci_init(void)
-{
- return platform_driver_probe(&dw_mci_pltfm_driver, dw_mci_pltfm_probe);
-}
-
-static void __exit dw_mci_exit(void)
-{
- platform_driver_unregister(&dw_mci_pltfm_driver);
-}
-
-module_init(dw_mci_init);
-module_exit(dw_mci_exit);
+module_platform_driver(dw_mci_pltfm_driver);
MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
MODULE_AUTHOR("NXP Semiconductor VietNam");
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index c0667c8af2bd..323c5022c2ca 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -232,7 +232,7 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct mmc_data *data;
struct dw_mci_slot *slot = mmc_priv(mmc);
- struct dw_mci_drv_data *drv_data = slot->host->drv_data;
+ const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 cmdr;
cmd->error = -EINPROGRESS;
@@ -617,13 +617,13 @@ static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
cmd, arg, cmd_status);
}
-static void dw_mci_setup_bus(struct dw_mci_slot *slot)
+static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
{
struct dw_mci *host = slot->host;
u32 div;
u32 clk_en_a;
- if (slot->clock != host->current_speed) {
+ if (slot->clock != host->current_speed || force_clkinit) {
div = host->bus_hz / slot->clock;
if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
/*
@@ -683,9 +683,6 @@ static void __dw_mci_start_request(struct dw_mci *host,
if (host->pdata->select_slot)
host->pdata->select_slot(slot->id);
- /* Slot specific timing and width adjustment */
- dw_mci_setup_bus(slot);
-
host->cur_slot = slot;
host->mrq = mrq;
@@ -773,22 +770,19 @@ static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
- struct dw_mci_drv_data *drv_data = slot->host->drv_data;
+ const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 regs;
- /* set default 1 bit mode */
- slot->ctype = SDMMC_CTYPE_1BIT;
-
switch (ios->bus_width) {
- case MMC_BUS_WIDTH_1:
- slot->ctype = SDMMC_CTYPE_1BIT;
- break;
case MMC_BUS_WIDTH_4:
slot->ctype = SDMMC_CTYPE_4BIT;
break;
case MMC_BUS_WIDTH_8:
slot->ctype = SDMMC_CTYPE_8BIT;
break;
+ default:
+ /* set default 1 bit mode */
+ slot->ctype = SDMMC_CTYPE_1BIT;
}
regs = mci_readl(slot->host, UHS_REG);
@@ -812,6 +806,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (drv_data && drv_data->set_ios)
drv_data->set_ios(slot->host, ios);
+ /* Slot specific timing and width adjustment */
+ dw_mci_setup_bus(slot, false);
+
switch (ios->power_mode) {
case MMC_POWER_UP:
set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
@@ -1817,7 +1814,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
{
struct mmc_host *mmc;
struct dw_mci_slot *slot;
- struct dw_mci_drv_data *drv_data = host->drv_data;
+ const struct dw_mci_drv_data *drv_data = host->drv_data;
int ctrl_id, ret;
u8 bus_width;
@@ -1850,6 +1847,9 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
if (host->pdata->caps)
mmc->caps = host->pdata->caps;
+ if (host->pdata->pm_caps)
+ mmc->pm_caps = host->pdata->pm_caps;
+
if (host->dev->of_node) {
ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
if (ctrl_id < 0)
@@ -1911,7 +1911,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
#endif /* CONFIG_MMC_DW_IDMAC */
}
- host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
+ host->vmmc = devm_regulator_get(mmc_dev(mmc), "vmmc");
if (IS_ERR(host->vmmc)) {
pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
host->vmmc = NULL;
@@ -1960,7 +1960,7 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
static void dw_mci_init_dma(struct dw_mci *host)
{
/* Alloc memory for sg translation */
- host->sg_cpu = dma_alloc_coherent(host->dev, PAGE_SIZE,
+ host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
&host->sg_dma, GFP_KERNEL);
if (!host->sg_cpu) {
dev_err(host->dev, "%s: could not alloc DMA memory\n",
@@ -2038,7 +2038,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
struct dw_mci_board *pdata;
struct device *dev = host->dev;
struct device_node *np = dev->of_node;
- struct dw_mci_drv_data *drv_data = host->drv_data;
+ const struct dw_mci_drv_data *drv_data = host->drv_data;
int idx, ret;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
@@ -2072,6 +2072,12 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
return ERR_PTR(ret);
}
+ if (of_find_property(np, "keep-power-in-suspend", NULL))
+ pdata->pm_caps |= MMC_PM_KEEP_POWER;
+
+ if (of_find_property(np, "enable-sdio-wakeup", NULL))
+ pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+
return pdata;
}
@@ -2084,7 +2090,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
int dw_mci_probe(struct dw_mci *host)
{
- struct dw_mci_drv_data *drv_data = host->drv_data;
+ const struct dw_mci_drv_data *drv_data = host->drv_data;
int width, i, ret = 0;
u32 fifo_size;
int init_slots = 0;
@@ -2103,26 +2109,24 @@ int dw_mci_probe(struct dw_mci *host)
return -ENODEV;
}
- host->biu_clk = clk_get(host->dev, "biu");
+ host->biu_clk = devm_clk_get(host->dev, "biu");
if (IS_ERR(host->biu_clk)) {
dev_dbg(host->dev, "biu clock not available\n");
} else {
ret = clk_prepare_enable(host->biu_clk);
if (ret) {
dev_err(host->dev, "failed to enable biu clock\n");
- clk_put(host->biu_clk);
return ret;
}
}
- host->ciu_clk = clk_get(host->dev, "ciu");
+ host->ciu_clk = devm_clk_get(host->dev, "ciu");
if (IS_ERR(host->ciu_clk)) {
dev_dbg(host->dev, "ciu clock not available\n");
} else {
ret = clk_prepare_enable(host->ciu_clk);
if (ret) {
dev_err(host->dev, "failed to enable ciu clock\n");
- clk_put(host->ciu_clk);
goto err_clk_biu;
}
}
@@ -2224,7 +2228,8 @@ int dw_mci_probe(struct dw_mci *host)
if (!host->card_workqueue)
goto err_dmaunmap;
INIT_WORK(&host->card_work, dw_mci_work_routine_card);
- ret = request_irq(host->irq, dw_mci_interrupt, host->irq_flags, "dw-mci", host);
+ ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
+ host->irq_flags, "dw-mci", host);
if (ret)
goto err_workqueue;
@@ -2262,7 +2267,7 @@ int dw_mci_probe(struct dw_mci *host)
} else {
dev_dbg(host->dev, "attempted to initialize %d slots, "
"but failed on all\n", host->num_slots);
- goto err_init_slot;
+ goto err_workqueue;
}
/*
@@ -2282,33 +2287,24 @@ int dw_mci_probe(struct dw_mci *host)
return 0;
-err_init_slot:
- free_irq(host->irq, host);
-
err_workqueue:
destroy_workqueue(host->card_workqueue);
err_dmaunmap:
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
- dma_free_coherent(host->dev, PAGE_SIZE,
- host->sg_cpu, host->sg_dma);
- if (host->vmmc) {
+ if (host->vmmc)
regulator_disable(host->vmmc);
- regulator_put(host->vmmc);
- }
err_clk_ciu:
- if (!IS_ERR(host->ciu_clk)) {
+ if (!IS_ERR(host->ciu_clk))
clk_disable_unprepare(host->ciu_clk);
- clk_put(host->ciu_clk);
- }
+
err_clk_biu:
- if (!IS_ERR(host->biu_clk)) {
+ if (!IS_ERR(host->biu_clk))
clk_disable_unprepare(host->biu_clk);
- clk_put(host->biu_clk);
- }
+
return ret;
}
EXPORT_SYMBOL(dw_mci_probe);
@@ -2330,24 +2326,19 @@ void dw_mci_remove(struct dw_mci *host)
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
- free_irq(host->irq, host);
destroy_workqueue(host->card_workqueue);
- dma_free_coherent(host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
- if (host->vmmc) {
+ if (host->vmmc)
regulator_disable(host->vmmc);
- regulator_put(host->vmmc);
- }
if (!IS_ERR(host->ciu_clk))
clk_disable_unprepare(host->ciu_clk);
+
if (!IS_ERR(host->biu_clk))
clk_disable_unprepare(host->biu_clk);
- clk_put(host->ciu_clk);
- clk_put(host->biu_clk);
}
EXPORT_SYMBOL(dw_mci_remove);
@@ -2411,6 +2402,11 @@ int dw_mci_resume(struct dw_mci *host)
struct dw_mci_slot *slot = host->slot[i];
if (!slot)
continue;
+ if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
+ dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
+ dw_mci_setup_bus(slot, true);
+ }
+
ret = mmc_resume_host(host->slot[i]->mmc);
if (ret < 0)
return ret;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 6290b7f1ccfe..29e680f193a0 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -240,7 +240,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
return 0;
for_each_sg(data->sg, sg, data->sg_len, i) {
- if (sg->offset & 3 || sg->length & 3) {
+ if (sg->offset & 3 || sg->length & 3 || sg->length < 512) {
host->do_dma = 0;
return 0;
}
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 80d1e6d4b0ae..206fe499ded5 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -43,7 +43,6 @@
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
-#include <linux/mmc/mxs-mmc.h>
#include <linux/spi/mxs-spi.h>
#define DRIVER_NAME "mxs-mmc"
@@ -593,13 +592,13 @@ static int mxs_mmc_probe(struct platform_device *pdev)
struct mxs_mmc_host *host;
struct mmc_host *mmc;
struct resource *iores, *dmares;
- struct mxs_mmc_platform_data *pdata;
struct pinctrl *pinctrl;
int ret = 0, irq_err, irq_dma;
dma_cap_mask_t mask;
struct regulator *reg_vmmc;
enum of_gpio_flags flags;
struct mxs_ssp *ssp;
+ u32 bus_width = 0;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -682,25 +681,15 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
- pdata = mmc_dev(host->mmc)->platform_data;
- if (!pdata) {
- u32 bus_width = 0;
- of_property_read_u32(np, "bus-width", &bus_width);
- if (bus_width == 4)
- mmc->caps |= MMC_CAP_4_BIT_DATA;
- else if (bus_width == 8)
- mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
- host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0,
- &flags);
- if (flags & OF_GPIO_ACTIVE_LOW)
- host->wp_inverted = 1;
- } else {
- if (pdata->flags & SLOTF_8_BIT_CAPABLE)
- mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
- if (pdata->flags & SLOTF_4_BIT_CAPABLE)
- mmc->caps |= MMC_CAP_4_BIT_DATA;
- host->wp_gpio = pdata->wp_gpio;
- }
+ of_property_read_u32(np, "bus-width", &bus_width);
+ if (bus_width == 4)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ else if (bus_width == 8)
+ mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+ host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ host->wp_inverted = 1;
mmc->f_min = 400000;
mmc->f_max = 288000000;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index fedd258cc4ea..d0a912fbad3b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -37,6 +37,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
@@ -62,6 +63,7 @@
#define VS18 (1 << 26)
#define VS30 (1 << 25)
+#define HSS (1 << 21)
#define SDVS18 (0x5 << 9)
#define SDVS30 (0x6 << 9)
#define SDVS33 (0x7 << 9)
@@ -78,28 +80,17 @@
#define CLKD_SHIFT 6
#define DTO_MASK 0x000F0000
#define DTO_SHIFT 16
-#define INT_EN_MASK 0x307F0033
-#define BWR_ENABLE (1 << 4)
-#define BRR_ENABLE (1 << 5)
-#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
-#define DMA_EN 0x1
+#define DMAE 0x1
#define MSBS (1 << 5)
#define BCE (1 << 1)
#define FOUR_BIT (1 << 1)
+#define HSPE (1 << 2)
#define DDR (1 << 19)
#define DW8 (1 << 5)
-#define CC 0x1
-#define TC 0x02
#define OD 0x1
-#define ERR (1 << 15)
-#define CMD_TIMEOUT (1 << 16)
-#define DATA_TIMEOUT (1 << 20)
-#define CMD_CRC (1 << 17)
-#define DATA_CRC (1 << 21)
-#define CARD_ERR (1 << 28)
#define STAT_CLEAR 0xFFFFFFFF
#define INIT_STREAM_CMD 0x00000000
#define DUAL_VOLT_OCR_BIT 7
@@ -108,6 +99,26 @@
#define SOFTRESET (1 << 1)
#define RESETDONE (1 << 0)
+/* Interrupt masks for IE and ISE register */
+#define CC_EN (1 << 0)
+#define TC_EN (1 << 1)
+#define BWR_EN (1 << 4)
+#define BRR_EN (1 << 5)
+#define ERR_EN (1 << 15)
+#define CTO_EN (1 << 16)
+#define CCRC_EN (1 << 17)
+#define CEB_EN (1 << 18)
+#define CIE_EN (1 << 19)
+#define DTO_EN (1 << 20)
+#define DCRC_EN (1 << 21)
+#define DEB_EN (1 << 22)
+#define CERR_EN (1 << 28)
+#define BADA_EN (1 << 29)
+
+#define INT_EN_MASK (BADA_EN | CERR_EN | DEB_EN | DCRC_EN |\
+ DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \
+ BRR_EN | BWR_EN | TC_EN | CC_EN)
+
#define MMC_AUTOSUSPEND_DELAY 100
#define MMC_TIMEOUT_MS 20
#define OMAP_MMC_MIN_CLOCK 400000
@@ -302,7 +313,7 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
reg = regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
- dev_dbg(host->dev, "vmmc regulator missing\n");
+ dev_err(host->dev, "vmmc regulator missing\n");
return PTR_ERR(reg);
} else {
mmc_slot(host).set_power = omap_hsmmc_set_power;
@@ -455,13 +466,13 @@ static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
unsigned int irq_mask;
if (host->use_dma)
- irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE);
+ irq_mask = INT_EN_MASK & ~(BRR_EN | BWR_EN);
else
irq_mask = INT_EN_MASK;
/* Disable timeout for erases */
if (cmd->opcode == MMC_ERASE)
- irq_mask &= ~DTO_ENABLE;
+ irq_mask &= ~DTO_EN;
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
@@ -494,6 +505,7 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
struct mmc_ios *ios = &host->mmc->ios;
unsigned long regval;
unsigned long timeout;
+ unsigned long clkdiv;
dev_vdbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock);
@@ -501,7 +513,8 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
regval = OMAP_HSMMC_READ(host->base, SYSCTL);
regval = regval & ~(CLKD_MASK | DTO_MASK);
- regval = regval | (calc_divisor(host, ios) << 6) | (DTO << 16);
+ clkdiv = calc_divisor(host, ios);
+ regval = regval | (clkdiv << 6) | (DTO << 16);
OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
OMAP_HSMMC_WRITE(host->base, SYSCTL,
OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
@@ -512,6 +525,27 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
&& time_before(jiffies, timeout))
cpu_relax();
+ /*
+ * Enable High-Speed Support
+ * Pre-Requisites
+ * - Controller should support High-Speed-Enable Bit
+ * - Controller should not be using DDR Mode
+ * - Controller should advertise that it supports High Speed
+ * in capabilities register
+ * - MMC/SD clock coming out of controller > 25MHz
+ */
+ if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
+ (ios->timing != MMC_TIMING_UHS_DDR50) &&
+ ((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
+ regval = OMAP_HSMMC_READ(host->base, HCTL);
+ if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
+ regval |= HSPE;
+ else
+ regval &= ~HSPE;
+
+ OMAP_HSMMC_WRITE(host->base, HCTL, regval);
+ }
+
omap_hsmmc_start_clock(host);
}
@@ -676,8 +710,8 @@ static void send_init_stream(struct omap_hsmmc_host *host)
OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
- while ((reg != CC) && time_before(jiffies, timeout))
- reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
+ while ((reg != CC_EN) && time_before(jiffies, timeout))
+ reg = OMAP_HSMMC_READ(host->base, STAT) & CC_EN;
OMAP_HSMMC_WRITE(host->base, CON,
OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
@@ -768,7 +802,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
}
if (host->use_dma)
- cmdreg |= DMA_EN;
+ cmdreg |= DMAE;
host->req_in_progress = 1;
@@ -968,16 +1002,20 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
__func__);
}
-static void hsmmc_command_incomplete(struct omap_hsmmc_host *host, int err)
+static void hsmmc_command_incomplete(struct omap_hsmmc_host *host,
+ int err, int end_cmd)
{
- omap_hsmmc_reset_controller_fsm(host, SRC);
- host->cmd->error = err;
+ if (end_cmd) {
+ omap_hsmmc_reset_controller_fsm(host, SRC);
+ if (host->cmd)
+ host->cmd->error = err;
+ }
if (host->data) {
omap_hsmmc_reset_controller_fsm(host, SRD);
omap_hsmmc_dma_cleanup(host, err);
- }
-
+ } else if (host->mrq && host->mrq->cmd)
+ host->mrq->cmd->error = err;
}
static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
@@ -988,23 +1026,25 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
data = host->data;
dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
- if (status & ERR) {
+ if (status & ERR_EN) {
omap_hsmmc_dbg_report_irq(host, status);
- if (status & (CMD_TIMEOUT | DATA_TIMEOUT))
- hsmmc_command_incomplete(host, -ETIMEDOUT);
- else if (status & (CMD_CRC | DATA_CRC))
- hsmmc_command_incomplete(host, -EILSEQ);
- end_cmd = 1;
+ if (status & (CTO_EN | CCRC_EN))
+ end_cmd = 1;
+ if (status & (CTO_EN | DTO_EN))
+ hsmmc_command_incomplete(host, -ETIMEDOUT, end_cmd);
+ else if (status & (CCRC_EN | DCRC_EN))
+ hsmmc_command_incomplete(host, -EILSEQ, end_cmd);
+
if (host->data || host->response_busy) {
- end_trans = 1;
+ end_trans = !end_cmd;
host->response_busy = 0;
}
}
- if (end_cmd || ((status & CC) && host->cmd))
+ if (end_cmd || ((status & CC_EN) && host->cmd))
omap_hsmmc_cmd_done(host, host->cmd);
- if ((end_trans || (status & TC)) && host->mrq)
+ if ((end_trans || (status & TC_EN)) && host->mrq)
omap_hsmmc_xfer_done(host, data);
}
@@ -1101,7 +1141,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
return 0;
err:
- dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
+ dev_err(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
return ret;
}
@@ -1360,7 +1400,7 @@ omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req)
if (host->use_dma) {
ret = omap_hsmmc_start_dma_transfer(host, req);
if (ret != 0) {
- dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
+ dev_err(mmc_dev(host->mmc), "MMC start dma failure\n");
return ret;
}
}
@@ -1678,7 +1718,7 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
{
struct omap_mmc_platform_data *pdata;
struct device_node *np = dev->of_node;
- u32 bus_width;
+ u32 bus_width, max_freq;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -1705,6 +1745,12 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
if (of_find_property(np, "ti,needs-special-reset", NULL))
pdata->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
+ if (!of_property_read_u32(np, "max-frequency", &max_freq))
+ pdata->max_freq = max_freq;
+
+ if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
+ pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
+
return pdata;
}
#else
@@ -1725,6 +1771,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
const struct of_device_id *match;
dma_cap_mask_t mask;
unsigned tx_req, rx_req;
+ struct pinctrl *pinctrl;
match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
if (match) {
@@ -1821,7 +1868,6 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
* MMC can still work without debounce clock.
*/
if (IS_ERR(host->dbclk)) {
- dev_warn(mmc_dev(host->mmc), "Failed to get debounce clk\n");
host->dbclk = NULL;
} else if (clk_prepare_enable(host->dbclk) != 0) {
dev_warn(mmc_dev(host->mmc), "Failed to enable debounce clk\n");
@@ -1889,13 +1935,13 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
ret = request_irq(host->irq, omap_hsmmc_irq, 0,
mmc_hostname(mmc), host);
if (ret) {
- dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
+ dev_err(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
goto err_irq;
}
if (pdata->init != NULL) {
if (pdata->init(&pdev->dev) != 0) {
- dev_dbg(mmc_dev(host->mmc),
+ dev_err(mmc_dev(host->mmc),
"Unable to configure MMC IRQs\n");
goto err_irq_cd_init;
}
@@ -1918,7 +1964,7 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
mmc_hostname(mmc), host);
if (ret) {
- dev_dbg(mmc_dev(host->mmc),
+ dev_err(mmc_dev(host->mmc),
"Unable to grab MMC CD IRQ\n");
goto err_irq_cd;
}
@@ -1928,6 +1974,11 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
omap_hsmmc_disable_irq(host);
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev,
+ "pins are not configured from the driver\n");
+
omap_hsmmc_protect_card(host);
mmc_add_host(mmc);
@@ -2027,6 +2078,25 @@ static int __devexit omap_hsmmc_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
+static int omap_hsmmc_prepare(struct device *dev)
+{
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+
+ if (host->pdata->suspend)
+ return host->pdata->suspend(dev, host->slot_id);
+
+ return 0;
+}
+
+static void omap_hsmmc_complete(struct device *dev)
+{
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+
+ if (host->pdata->resume)
+ host->pdata->resume(dev, host->slot_id);
+
+}
+
static int omap_hsmmc_suspend(struct device *dev)
{
int ret = 0;
@@ -2040,23 +2110,10 @@ static int omap_hsmmc_suspend(struct device *dev)
pm_runtime_get_sync(host->dev);
host->suspended = 1;
- if (host->pdata->suspend) {
- ret = host->pdata->suspend(dev, host->slot_id);
- if (ret) {
- dev_dbg(dev, "Unable to handle MMC board"
- " level suspend\n");
- host->suspended = 0;
- return ret;
- }
- }
ret = mmc_suspend_host(host->mmc);
if (ret) {
host->suspended = 0;
- if (host->pdata->resume) {
- if (host->pdata->resume(dev, host->slot_id))
- dev_dbg(dev, "Unmask interrupt failed\n");
- }
goto err;
}
@@ -2093,12 +2150,6 @@ static int omap_hsmmc_resume(struct device *dev)
if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
omap_hsmmc_conf_bus_power(host);
- if (host->pdata->resume) {
- ret = host->pdata->resume(dev, host->slot_id);
- if (ret)
- dev_dbg(dev, "Unmask interrupt failed\n");
- }
-
omap_hsmmc_protect_card(host);
/* Notify the core to resume the host */
@@ -2114,8 +2165,10 @@ static int omap_hsmmc_resume(struct device *dev)
}
#else
+#define omap_hsmmc_prepare NULL
+#define omap_hsmmc_complete NULL
#define omap_hsmmc_suspend NULL
-#define omap_hsmmc_resume NULL
+#define omap_hsmmc_resume NULL
#endif
static int omap_hsmmc_runtime_suspend(struct device *dev)
@@ -2143,6 +2196,8 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
.suspend = omap_hsmmc_suspend,
.resume = omap_hsmmc_resume,
+ .prepare = omap_hsmmc_prepare,
+ .complete = omap_hsmmc_complete,
.runtime_suspend = omap_hsmmc_runtime_suspend,
.runtime_resume = omap_hsmmc_runtime_resume,
};
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index 8fd50a211037..e6214480bc98 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -19,20 +19,30 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/err.h>
-#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
-#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
#include <linux/mmc/host.h>
+#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_gpio.h>
#include "sdhci-pltfm.h"
struct sdhci_dove_priv {
struct clk *clk;
+ int gpio_cd;
};
+static irqreturn_t sdhci_dove_carddetect_irq(int irq, void *data)
+{
+ struct sdhci_host *host = data;
+
+ tasklet_schedule(&host->card_tasklet);
+ return IRQ_HANDLED;
+}
+
static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
{
u16 ret;
@@ -50,16 +60,25 @@ static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
static u32 sdhci_dove_readl(struct sdhci_host *host, int reg)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_dove_priv *priv = pltfm_host->priv;
u32 ret;
+ ret = readl(host->ioaddr + reg);
+
switch (reg) {
case SDHCI_CAPABILITIES:
- ret = readl(host->ioaddr + reg);
/* Mask the support for 3.0V */
ret &= ~SDHCI_CAN_VDD_300;
break;
- default:
- ret = readl(host->ioaddr + reg);
+ case SDHCI_PRESENT_STATE:
+ if (gpio_is_valid(priv->gpio_cd)) {
+ if (gpio_get_value(priv->gpio_cd) == 0)
+ ret |= SDHCI_CARD_PRESENT;
+ else
+ ret &= ~SDHCI_CARD_PRESENT;
+ }
+ break;
}
return ret;
}
@@ -92,25 +111,70 @@ static int __devinit sdhci_dove_probe(struct platform_device *pdev)
return -ENOMEM;
}
- priv->clk = clk_get(&pdev->dev, NULL);
- if (!IS_ERR(priv->clk))
- clk_prepare_enable(priv->clk);
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
- ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
- if (ret)
- goto sdhci_dove_register_fail;
+ if (pdev->dev.of_node) {
+ priv->gpio_cd = of_get_named_gpio(pdev->dev.of_node,
+ "cd-gpios", 0);
+ } else {
+ priv->gpio_cd = -EINVAL;
+ }
+
+ if (gpio_is_valid(priv->gpio_cd)) {
+ ret = gpio_request(priv->gpio_cd, "sdhci-cd");
+ if (ret) {
+ dev_err(&pdev->dev, "card detect gpio request failed: %d\n",
+ ret);
+ return ret;
+ }
+ gpio_direction_input(priv->gpio_cd);
+ }
+
+ host = sdhci_pltfm_init(pdev, &sdhci_dove_pdata);
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ goto err_sdhci_pltfm_init;
+ }
- host = platform_get_drvdata(pdev);
pltfm_host = sdhci_priv(host);
pltfm_host->priv = priv;
+ if (!IS_ERR(priv->clk))
+ clk_prepare_enable(priv->clk);
+
+ sdhci_get_of_property(pdev);
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_sdhci_add;
+
+ /*
+ * We must request the IRQ after sdhci_add_host(), as the tasklet only
+ * gets setup in sdhci_add_host() and we oops.
+ */
+ if (gpio_is_valid(priv->gpio_cd)) {
+ ret = request_irq(gpio_to_irq(priv->gpio_cd),
+ sdhci_dove_carddetect_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ mmc_hostname(host->mmc), host);
+ if (ret) {
+ dev_err(&pdev->dev, "card detect irq request failed: %d\n",
+ ret);
+ goto err_request_irq;
+ }
+ }
+
return 0;
-sdhci_dove_register_fail:
- if (!IS_ERR(priv->clk)) {
+err_request_irq:
+ sdhci_remove_host(host, 0);
+err_sdhci_add:
+ if (!IS_ERR(priv->clk))
clk_disable_unprepare(priv->clk);
- clk_put(priv->clk);
- }
+ sdhci_pltfm_free(pdev);
+err_sdhci_pltfm_init:
+ if (gpio_is_valid(priv->gpio_cd))
+ gpio_free(priv->gpio_cd);
return ret;
}
@@ -122,10 +186,14 @@ static int __devexit sdhci_dove_remove(struct platform_device *pdev)
sdhci_pltfm_unregister(pdev);
- if (!IS_ERR(priv->clk)) {
- clk_disable_unprepare(priv->clk);
- clk_put(priv->clk);
+ if (gpio_is_valid(priv->gpio_cd)) {
+ free_irq(gpio_to_irq(priv->gpio_cd), host);
+ gpio_free(priv->gpio_cd);
}
+
+ if (!IS_ERR(priv->clk))
+ clk_disable_unprepare(priv->clk);
+
return 0;
}
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index effc2acfe778..1849461c39ee 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -456,10 +456,10 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
pltfm_host = sdhci_priv(host);
- imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
+ imx_data = devm_kzalloc(&pdev->dev, sizeof(*imx_data), GFP_KERNEL);
if (!imx_data) {
err = -ENOMEM;
- goto err_imx_data;
+ goto free_sdhci;
}
if (of_id)
@@ -470,19 +470,19 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(imx_data->clk_ipg)) {
err = PTR_ERR(imx_data->clk_ipg);
- goto err_clk_get;
+ goto free_sdhci;
}
imx_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(imx_data->clk_ahb)) {
err = PTR_ERR(imx_data->clk_ahb);
- goto err_clk_get;
+ goto free_sdhci;
}
imx_data->clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(imx_data->clk_per)) {
err = PTR_ERR(imx_data->clk_per);
- goto err_clk_get;
+ goto free_sdhci;
}
pltfm_host->clk = imx_data->clk_per;
@@ -494,7 +494,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(imx_data->pinctrl)) {
err = PTR_ERR(imx_data->pinctrl);
- goto pin_err;
+ goto disable_clk;
}
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
@@ -519,7 +519,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (!host->mmc->parent->platform_data) {
dev_err(mmc_dev(host->mmc), "no board data!\n");
err = -EINVAL;
- goto no_board_data;
+ goto disable_clk;
}
imx_data->boarddata = *((struct esdhc_platform_data *)
host->mmc->parent->platform_data);
@@ -527,7 +527,8 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
/* write_protect */
if (boarddata->wp_type == ESDHC_WP_GPIO) {
- err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
+ err = devm_gpio_request_one(&pdev->dev, boarddata->wp_gpio,
+ GPIOF_IN, "ESDHC_WP");
if (err) {
dev_warn(mmc_dev(host->mmc),
"no write-protect pin available!\n");
@@ -543,19 +544,21 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
switch (boarddata->cd_type) {
case ESDHC_CD_GPIO:
- err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
+ err = devm_gpio_request_one(&pdev->dev, boarddata->cd_gpio,
+ GPIOF_IN, "ESDHC_CD");
if (err) {
dev_err(mmc_dev(host->mmc),
"no card-detect pin available!\n");
- goto no_card_detect_pin;
+ goto disable_clk;
}
- err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
+ err = devm_request_irq(&pdev->dev,
+ gpio_to_irq(boarddata->cd_gpio), cd_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
mmc_hostname(host->mmc), host);
if (err) {
dev_err(mmc_dev(host->mmc), "request irq error\n");
- goto no_card_detect_irq;
+ goto disable_clk;
}
/* fall through */
@@ -574,27 +577,15 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
err = sdhci_add_host(host);
if (err)
- goto err_add_host;
+ goto disable_clk;
return 0;
-err_add_host:
- if (gpio_is_valid(boarddata->cd_gpio))
- free_irq(gpio_to_irq(boarddata->cd_gpio), host);
-no_card_detect_irq:
- if (gpio_is_valid(boarddata->cd_gpio))
- gpio_free(boarddata->cd_gpio);
- if (gpio_is_valid(boarddata->wp_gpio))
- gpio_free(boarddata->wp_gpio);
-no_card_detect_pin:
-no_board_data:
-pin_err:
+disable_clk:
clk_disable_unprepare(imx_data->clk_per);
clk_disable_unprepare(imx_data->clk_ipg);
clk_disable_unprepare(imx_data->clk_ahb);
-err_clk_get:
- kfree(imx_data);
-err_imx_data:
+free_sdhci:
sdhci_pltfm_free(pdev);
return err;
}
@@ -604,25 +595,14 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = pltfm_host->priv;
- struct esdhc_platform_data *boarddata = &imx_data->boarddata;
int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
sdhci_remove_host(host, dead);
- if (gpio_is_valid(boarddata->wp_gpio))
- gpio_free(boarddata->wp_gpio);
-
- if (gpio_is_valid(boarddata->cd_gpio)) {
- free_irq(gpio_to_irq(boarddata->cd_gpio), host);
- gpio_free(boarddata->cd_gpio);
- }
-
clk_disable_unprepare(imx_data->clk_per);
clk_disable_unprepare(imx_data->clk_ipg);
clk_disable_unprepare(imx_data->clk_ahb);
- kfree(imx_data);
-
sdhci_pltfm_free(pdev);
return 0;
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 63d219f57cae..60de2eeb39b1 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -22,6 +22,7 @@
#include "sdhci-esdhc.h"
#define VENDOR_V_22 0x12
+#define VENDOR_V_23 0x13
static u32 esdhc_readl(struct sdhci_host *host, int reg)
{
u32 ret;
@@ -85,6 +86,18 @@ static u8 esdhc_readb(struct sdhci_host *host, int reg)
return ret;
}
+static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
+{
+ /*
+ * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
+ * when SYSCTL[RSTD]) is set for some special operations.
+ * No any impact other operation.
+ */
+ if (reg == SDHCI_INT_ENABLE)
+ val |= SDHCI_INT_BLK_GAP;
+ sdhci_be32bs_writel(host, val, reg);
+}
+
static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
{
if (reg == SDHCI_BLOCK_SIZE) {
@@ -121,6 +134,41 @@ static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
sdhci_be32bs_writeb(host, val, reg);
}
+/*
+ * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
+ * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
+ * and Block Gap Event(IRQSTAT[BGE]) are also set.
+ * For Continue, apply soft reset for data(SYSCTL[RSTD]);
+ * and re-issue the entire read transaction from beginning.
+ */
+static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
+{
+ u32 tmp;
+ bool applicable;
+ dma_addr_t dmastart;
+ dma_addr_t dmanow;
+
+ tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+ tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+
+ applicable = (intmask & SDHCI_INT_DATA_END) &&
+ (intmask & SDHCI_INT_BLK_GAP) &&
+ (tmp == VENDOR_V_23);
+ if (!applicable)
+ return;
+
+ host->data->error = 0;
+ dmastart = sg_dma_address(host->data->sg);
+ dmanow = dmastart + host->data->bytes_xfered;
+ /*
+ * Force update to the next DMA block boundary.
+ */
+ dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
+ SDHCI_DEFAULT_BOUNDARY_SIZE;
+ host->data->bytes_xfered = dmanow - dmastart;
+ sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+}
+
static int esdhc_of_enable_dma(struct sdhci_host *host)
{
setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
@@ -177,13 +225,16 @@ static void esdhc_of_platform_init(struct sdhci_host *host)
vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
if (vvn == VENDOR_V_22)
host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+ if (vvn > VENDOR_V_22)
+ host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
}
static struct sdhci_ops sdhci_esdhc_ops = {
.read_l = esdhc_readl,
.read_w = esdhc_readw,
.read_b = esdhc_readb,
- .write_l = sdhci_be32bs_writel,
+ .write_l = esdhc_writel,
.write_w = esdhc_writew,
.write_b = esdhc_writeb,
.set_clock = esdhc_of_set_clock,
@@ -195,6 +246,7 @@ static struct sdhci_ops sdhci_esdhc_ops = {
.platform_suspend = esdhc_of_suspend,
.platform_resume = esdhc_of_resume,
#endif
+ .adma_workaround = esdhci_of_adma_workaround,
};
static struct sdhci_pltfm_data sdhci_esdhc_pdata = {
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 04936f353ced..0777fad997ba 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -114,6 +114,7 @@ static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
SDHCI_TIMEOUT_CLK_UNIT |
SDHCI_CAN_VDD_330 |
+ SDHCI_CAN_DO_HISPD |
SDHCI_CAN_DO_SDMA;
return 0;
}
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 27164457f861..d4283ef5917a 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -78,6 +78,9 @@ void sdhci_get_of_property(struct platform_device *pdev)
if (of_get_property(np, "broken-cd", NULL))
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ if (of_get_property(np, "no-1-8-v", NULL))
+ host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+
if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
@@ -89,6 +92,12 @@ void sdhci_get_of_property(struct platform_device *pdev)
clk = of_get_property(np, "clock-frequency", &size);
if (clk && size == sizeof(*clk) && *clk)
pltfm_host->clock = be32_to_cpup(clk);
+
+ if (of_find_property(np, "keep-power-in-suspend", NULL))
+ host->mmc->pm_caps |= MMC_PM_KEEP_POWER;
+
+ if (of_find_property(np, "enable-sdio-wakeup", NULL))
+ host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
}
}
#else
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e918a2bb3af1..60829c92bcfd 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -163,10 +163,18 @@ static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
return 0;
}
+static u32 pxav3_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return clk_get_rate(pltfm_host->clk);
+}
+
static struct sdhci_ops pxav3_sdhci_ops = {
.platform_reset_exit = pxav3_set_private_registers,
.set_uhs_signaling = pxav3_set_uhs_signaling,
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
+ .get_max_clock = pxav3_get_max_clock,
};
#ifdef CONFIG_OF
@@ -249,7 +257,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
- | SDHCI_QUIRK_32BIT_ADMA_SIZE;
+ | SDHCI_QUIRK_32BIT_ADMA_SIZE
+ | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
/* enable 1/8V DDR capable */
host->mmc->caps |= MMC_CAP_1_8V_DDR;
@@ -271,6 +280,8 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
if (pdata->quirks)
host->quirks |= pdata->quirks;
+ if (pdata->quirks2)
+ host->quirks2 |= pdata->quirks2;
if (pdata->host_caps)
host->mmc->caps |= pdata->host_caps;
if (pdata->host_caps2)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index c9ec725884e5..82b7a7ad4217 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -24,6 +24,7 @@
#include <linux/of_gpio.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/mmc/host.h>
@@ -57,6 +58,7 @@ struct sdhci_s3c {
int ext_cd_irq;
int ext_cd_gpio;
int *gpios;
+ struct pinctrl *pctrl;
struct clk *clk_io;
struct clk *clk_bus[MAX_BUS_CLK];
@@ -373,7 +375,9 @@ static struct sdhci_ops sdhci_s3c_ops = {
static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
{
struct sdhci_host *host = platform_get_drvdata(dev);
+#ifdef CONFIG_PM_RUNTIME
struct sdhci_s3c *sc = sdhci_priv(host);
+#endif
unsigned long flags;
if (host) {
@@ -413,7 +417,7 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
struct s3c_sdhci_platdata *pdata = sc->pdata;
struct device *dev = &sc->pdev->dev;
- if (gpio_request(pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
+ if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
sc->ext_cd_gpio = pdata->ext_cd_gpio;
sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
if (sc->ext_cd_irq &&
@@ -456,12 +460,12 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev,
return -ENOMEM;
/* get the card detection method */
- if (of_get_property(node, "broken-cd", 0)) {
+ if (of_get_property(node, "broken-cd", NULL)) {
pdata->cd_type = S3C_SDHCI_CD_NONE;
goto setup_bus;
}
- if (of_get_property(node, "non-removable", 0)) {
+ if (of_get_property(node, "non-removable", NULL)) {
pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
goto setup_bus;
}
@@ -484,8 +488,9 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev,
return -EINVAL;
}
- dev_info(dev, "assuming no card detect line available\n");
- pdata->cd_type = S3C_SDHCI_CD_NONE;
+ /* assuming internal card detect that will be configured by pinctrl */
+ pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+ goto setup_bus;
found_cd:
if (pdata->cd_type == S3C_SDHCI_CD_GPIO) {
@@ -494,7 +499,7 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev,
if (of_get_property(node, "cd-inverted", NULL))
pdata->ext_cd_gpio_invert = 1;
} else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- ret = gpio_request(gpio, "sdhci-cd");
+ ret = devm_gpio_request(dev, gpio, "sdhci-cd");
if (ret) {
dev_err(dev, "card detect gpio request failed\n");
return -EINVAL;
@@ -503,33 +508,28 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev,
}
setup_bus:
+ if (!IS_ERR(ourhost->pctrl))
+ return 0;
+
/* get the gpios for command, clock and data lines */
for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
gpio = of_get_gpio(node, cnt);
if (!gpio_is_valid(gpio)) {
dev_err(dev, "invalid gpio[%d]\n", cnt);
- goto err_free_dt_cd_gpio;
+ return -EINVAL;
}
ourhost->gpios[cnt] = gpio;
}
for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
- ret = gpio_request(ourhost->gpios[cnt], "sdhci-gpio");
+ ret = devm_gpio_request(dev, ourhost->gpios[cnt], "sdhci-gpio");
if (ret) {
dev_err(dev, "gpio[%d] request failed\n", cnt);
- goto err_free_dt_gpios;
+ return -EINVAL;
}
}
return 0;
-
- err_free_dt_gpios:
- while (--cnt >= 0)
- gpio_free(ourhost->gpios[cnt]);
- err_free_dt_cd_gpio:
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
- gpio_free(ourhost->ext_cd_gpio);
- return -EINVAL;
}
#else
static int __devinit sdhci_s3c_parse_dt(struct device *dev,
@@ -586,13 +586,15 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
ret = -ENOMEM;
- goto err_pdata;
+ goto err_pdata_io_clk;
}
+ sc->pctrl = devm_pinctrl_get_select_default(&pdev->dev);
+
if (pdev->dev.of_node) {
ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
if (ret)
- goto err_pdata;
+ goto err_pdata_io_clk;
} else {
memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
sc->ext_cd_gpio = -1; /* invalid gpio number */
@@ -610,7 +612,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
if (IS_ERR(sc->clk_io)) {
dev_err(dev, "failed to get io clock\n");
ret = PTR_ERR(sc->clk_io);
- goto err_io_clk;
+ goto err_pdata_io_clk;
}
/* enable the local io clock and keep it running for the moment. */
@@ -773,13 +775,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
clk_disable_unprepare(sc->clk_io);
clk_put(sc->clk_io);
- err_io_clk:
- for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
- gpio_free(sc->gpios[ptr]);
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
- gpio_free(sc->ext_cd_gpio);
-
- err_pdata:
+ err_pdata_io_clk:
sdhci_free_host(host);
return ret;
@@ -798,9 +794,6 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
if (sc->ext_cd_irq)
free_irq(sc->ext_cd_irq, sc);
- if (gpio_is_valid(sc->ext_cd_gpio))
- gpio_free(sc->ext_cd_gpio);
-
#ifdef CONFIG_PM_RUNTIME
if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
clk_prepare_enable(sc->clk_io);
@@ -821,11 +814,6 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
clk_disable_unprepare(sc->clk_io);
clk_put(sc->clk_io);
- if (pdev->dev.of_node) {
- for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
- gpio_free(sc->gpios[ptr]);
- }
-
sdhci_free_host(host);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 6be89c032deb..87a700944b7d 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -146,6 +146,11 @@ static int __devinit sdhci_probe(struct platform_device *pdev)
goto put_clk;
}
+ ret = clk_set_rate(sdhci->clk, 50000000);
+ if (ret)
+ dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n",
+ clk_get_rate(sdhci->clk));
+
if (np) {
sdhci->data = sdhci_probe_config_dt(pdev);
if (IS_ERR(sdhci->data)) {
@@ -297,7 +302,7 @@ static int sdhci_suspend(struct device *dev)
ret = sdhci_suspend_host(host);
if (!ret)
- clk_disable_unprepare(sdhci->clk);
+ clk_disable(sdhci->clk);
return ret;
}
@@ -308,7 +313,7 @@ static int sdhci_resume(struct device *dev)
struct spear_sdhci *sdhci = dev_get_platdata(dev);
int ret;
- ret = clk_prepare_enable(sdhci->clk);
+ ret = clk_enable(sdhci->clk);
if (ret) {
dev_dbg(dev, "Resume: Error enabling clock\n");
return ret;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c7851c0aabce..6f0bfc0c8c9c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1618,7 +1618,7 @@ static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host,
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
if (host->vqmmc) {
- ret = regulator_set_voltage(host->vqmmc, 3300000, 3300000);
+ ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000);
if (ret) {
pr_warning("%s: Switching to 3.3V signalling voltage "
" failed\n", mmc_hostname(host->mmc));
@@ -1662,7 +1662,7 @@ static int sdhci_do_1_8v_signal_voltage_switch(struct sdhci_host *host,
*/
if (host->vqmmc)
ret = regulator_set_voltage(host->vqmmc,
- 1800000, 1800000);
+ 1700000, 1950000);
else
ret = 0;
@@ -1994,30 +1994,11 @@ static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable)
sdhci_runtime_pm_put(host);
}
-static const struct mmc_host_ops sdhci_ops = {
- .request = sdhci_request,
- .set_ios = sdhci_set_ios,
- .get_ro = sdhci_get_ro,
- .hw_reset = sdhci_hw_reset,
- .enable_sdio_irq = sdhci_enable_sdio_irq,
- .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
- .execute_tuning = sdhci_execute_tuning,
- .enable_preset_value = sdhci_enable_preset_value,
-};
-
-/*****************************************************************************\
- * *
- * Tasklets *
- * *
-\*****************************************************************************/
-
-static void sdhci_tasklet_card(unsigned long param)
+static void sdhci_card_event(struct mmc_host *mmc)
{
- struct sdhci_host *host;
+ struct sdhci_host *host = mmc_priv(mmc);
unsigned long flags;
- host = (struct sdhci_host*)param;
-
spin_lock_irqsave(&host->lock, flags);
/* Check host->mrq first in case we are runtime suspended */
@@ -2036,6 +2017,31 @@ static void sdhci_tasklet_card(unsigned long param)
}
spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static const struct mmc_host_ops sdhci_ops = {
+ .request = sdhci_request,
+ .set_ios = sdhci_set_ios,
+ .get_ro = sdhci_get_ro,
+ .hw_reset = sdhci_hw_reset,
+ .enable_sdio_irq = sdhci_enable_sdio_irq,
+ .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
+ .execute_tuning = sdhci_execute_tuning,
+ .enable_preset_value = sdhci_enable_preset_value,
+ .card_event = sdhci_card_event,
+};
+
+/*****************************************************************************\
+ * *
+ * Tasklets *
+ * *
+\*****************************************************************************/
+
+static void sdhci_tasklet_card(unsigned long param)
+{
+ struct sdhci_host *host = (struct sdhci_host*)param;
+
+ sdhci_card_event(host->mmc);
mmc_detect_change(host->mmc, msecs_to_jiffies(200));
}
@@ -2282,6 +2288,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
sdhci_show_adma_error(host);
host->data->error = -EIO;
+ if (host->ops->adma_workaround)
+ host->ops->adma_workaround(host, intmask);
}
if (host->data->error)
@@ -2858,10 +2866,16 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_hostname(mmc));
host->vqmmc = NULL;
}
- }
- else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
+ } else {
regulator_enable(host->vqmmc);
- else
+ if (!regulator_is_supported_voltage(host->vqmmc, 1700000,
+ 1950000))
+ caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
+ SDHCI_SUPPORT_SDR50 |
+ SDHCI_SUPPORT_DDR50);
+ }
+
+ if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)
caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
SDHCI_SUPPORT_DDR50);
@@ -2919,21 +2933,18 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_hostname(mmc));
host->vmmc = NULL;
}
- } else
- regulator_enable(host->vmmc);
+ }
#ifdef CONFIG_REGULATOR
if (host->vmmc) {
- ret = regulator_is_supported_voltage(host->vmmc, 3300000,
- 3300000);
+ ret = regulator_is_supported_voltage(host->vmmc, 2700000,
+ 3600000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
caps[0] &= ~SDHCI_CAN_VDD_330;
- ret = regulator_is_supported_voltage(host->vmmc, 3000000,
- 3000000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
caps[0] &= ~SDHCI_CAN_VDD_300;
- ret = regulator_is_supported_voltage(host->vmmc, 1800000,
- 1800000);
+ ret = regulator_is_supported_voltage(host->vmmc, 1700000,
+ 1950000);
if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
caps[0] &= ~SDHCI_CAN_VDD_180;
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 71a4a7ed46c5..a6d69b7bdea2 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -120,6 +120,7 @@
#define SDHCI_SIGNAL_ENABLE 0x38
#define SDHCI_INT_RESPONSE 0x00000001
#define SDHCI_INT_DATA_END 0x00000002
+#define SDHCI_INT_BLK_GAP 0x00000004
#define SDHCI_INT_DMA_END 0x00000008
#define SDHCI_INT_SPACE_AVAIL 0x00000010
#define SDHCI_INT_DATA_AVAIL 0x00000020
@@ -146,7 +147,8 @@
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
- SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
+ SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \
+ SDHCI_INT_BLK_GAP)
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
#define SDHCI_ACMD12_ERR 0x3C
@@ -278,6 +280,7 @@ struct sdhci_ops {
void (*hw_reset)(struct sdhci_host *host);
void (*platform_suspend)(struct sdhci_host *host);
void (*platform_resume)(struct sdhci_host *host);
+ void (*adma_workaround)(struct sdhci_host *host, u32 intmask);
void (*platform_init)(struct sdhci_host *host);
};
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 7eaee3eeb6b2..ae795233a1d6 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1306,7 +1306,6 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
struct sh_mmcif_plat_data *pd = pdev->dev.platform_data;
struct resource *res;
void __iomem *reg;
- char clk_name[8];
irq[0] = platform_get_irq(pdev, 0);
irq[1] = platform_get_irq(pdev, 1);
@@ -1356,11 +1355,10 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
host->power = false;
- snprintf(clk_name, sizeof(clk_name), "mmc%d", pdev->id);
- host->hclk = clk_get(&pdev->dev, clk_name);
+ host->hclk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->hclk)) {
ret = PTR_ERR(host->hclk);
- dev_err(&pdev->dev, "cannot get clock \"%s\": %d\n", clk_name, ret);
+ dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
goto eclkget;
}
ret = sh_mmcif_clk_update(host);
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 0bdc146178db..d6ff8531fb35 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -123,7 +123,6 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
struct tmio_mmc_data *mmc_data;
struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
struct tmio_mmc_host *host;
- char clk_name[8];
int irq, ret, i = 0;
bool multiplexed_isr = true;
@@ -144,11 +143,10 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
}
}
- snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id);
- priv->clk = clk_get(&pdev->dev, clk_name);
+ priv->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(priv->clk)) {
- dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
ret = PTR_ERR(priv->clk);
+ dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
goto eclkget;
}
@@ -250,7 +248,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n",
mmc_hostname(host->mmc), (unsigned long)
(platform_get_resource(pdev, IORESOURCE_MEM, 0)->start),
- mmc_data->hclk / 1000000);
+ host->mmc->f_max / 1000000);
return ret;
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index d5655a63eda4..cb9f361c03ab 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2362,6 +2362,7 @@ error4:
error1:
usb_free_urb(command_out_urb);
error0:
+ usb_put_dev(udev);
return retval;
}
diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
new file mode 100644
index 000000000000..5ba4605e4f80
--- /dev/null
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -0,0 +1,1029 @@
+/*
+ * WM8505/WM8650 SD/MMC Host Controller
+ *
+ * Copyright (C) 2010 Tony Prisk
+ * Copyright (C) 2008 WonderMedia Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+
+#include <asm/byteorder.h>
+
+
+#define DRIVER_NAME "wmt-sdhc"
+
+
+/* MMC/SD controller registers */
+#define SDMMC_CTLR 0x00
+#define SDMMC_CMD 0x01
+#define SDMMC_RSPTYPE 0x02
+#define SDMMC_ARG 0x04
+#define SDMMC_BUSMODE 0x08
+#define SDMMC_BLKLEN 0x0C
+#define SDMMC_BLKCNT 0x0E
+#define SDMMC_RSP 0x10
+#define SDMMC_CBCR 0x20
+#define SDMMC_INTMASK0 0x24
+#define SDMMC_INTMASK1 0x25
+#define SDMMC_STS0 0x28
+#define SDMMC_STS1 0x29
+#define SDMMC_STS2 0x2A
+#define SDMMC_STS3 0x2B
+#define SDMMC_RSPTIMEOUT 0x2C
+#define SDMMC_CLK 0x30 /* VT8500 only */
+#define SDMMC_EXTCTRL 0x34
+#define SDMMC_SBLKLEN 0x38
+#define SDMMC_DMATIMEOUT 0x3C
+
+
+/* SDMMC_CTLR bit fields */
+#define CTLR_CMD_START 0x01
+#define CTLR_CMD_WRITE 0x04
+#define CTLR_FIFO_RESET 0x08
+
+/* SDMMC_BUSMODE bit fields */
+#define BM_SPI_MODE 0x01
+#define BM_FOURBIT_MODE 0x02
+#define BM_EIGHTBIT_MODE 0x04
+#define BM_SD_OFF 0x10
+#define BM_SPI_CS 0x20
+#define BM_SD_POWER 0x40
+#define BM_SOFT_RESET 0x80
+#define BM_ONEBIT_MASK 0xFD
+
+/* SDMMC_BLKLEN bit fields */
+#define BLKL_CRCERR_ABORT 0x0800
+#define BLKL_CD_POL_HIGH 0x1000
+#define BLKL_GPI_CD 0x2000
+#define BLKL_DATA3_CD 0x4000
+#define BLKL_INT_ENABLE 0x8000
+
+/* SDMMC_INTMASK0 bit fields */
+#define INT0_MBLK_TRAN_DONE_INT_EN 0x10
+#define INT0_BLK_TRAN_DONE_INT_EN 0x20
+#define INT0_CD_INT_EN 0x40
+#define INT0_DI_INT_EN 0x80
+
+/* SDMMC_INTMASK1 bit fields */
+#define INT1_CMD_RES_TRAN_DONE_INT_EN 0x02
+#define INT1_CMD_RES_TOUT_INT_EN 0x04
+#define INT1_MBLK_AUTO_STOP_INT_EN 0x08
+#define INT1_DATA_TOUT_INT_EN 0x10
+#define INT1_RESCRC_ERR_INT_EN 0x20
+#define INT1_RCRC_ERR_INT_EN 0x40
+#define INT1_WCRC_ERR_INT_EN 0x80
+
+/* SDMMC_STS0 bit fields */
+#define STS0_WRITE_PROTECT 0x02
+#define STS0_CD_DATA3 0x04
+#define STS0_CD_GPI 0x08
+#define STS0_MBLK_DONE 0x10
+#define STS0_BLK_DONE 0x20
+#define STS0_CARD_DETECT 0x40
+#define STS0_DEVICE_INS 0x80
+
+/* SDMMC_STS1 bit fields */
+#define STS1_SDIO_INT 0x01
+#define STS1_CMDRSP_DONE 0x02
+#define STS1_RSP_TIMEOUT 0x04
+#define STS1_AUTOSTOP_DONE 0x08
+#define STS1_DATA_TIMEOUT 0x10
+#define STS1_RSP_CRC_ERR 0x20
+#define STS1_RCRC_ERR 0x40
+#define STS1_WCRC_ERR 0x80
+
+/* SDMMC_STS2 bit fields */
+#define STS2_CMD_RES_BUSY 0x10
+#define STS2_DATARSP_BUSY 0x20
+#define STS2_DIS_FORCECLK 0x80
+
+
+/* MMC/SD DMA Controller Registers */
+#define SDDMA_GCR 0x100
+#define SDDMA_IER 0x104
+#define SDDMA_ISR 0x108
+#define SDDMA_DESPR 0x10C
+#define SDDMA_RBR 0x110
+#define SDDMA_DAR 0x114
+#define SDDMA_BAR 0x118
+#define SDDMA_CPR 0x11C
+#define SDDMA_CCR 0x120
+
+
+/* SDDMA_GCR bit fields */
+#define DMA_GCR_DMA_EN 0x00000001
+#define DMA_GCR_SOFT_RESET 0x00000100
+
+/* SDDMA_IER bit fields */
+#define DMA_IER_INT_EN 0x00000001
+
+/* SDDMA_ISR bit fields */
+#define DMA_ISR_INT_STS 0x00000001
+
+/* SDDMA_RBR bit fields */
+#define DMA_RBR_FORMAT 0x40000000
+#define DMA_RBR_END 0x80000000
+
+/* SDDMA_CCR bit fields */
+#define DMA_CCR_RUN 0x00000080
+#define DMA_CCR_IF_TO_PERIPHERAL 0x00000000
+#define DMA_CCR_PERIPHERAL_TO_IF 0x00400000
+
+/* SDDMA_CCR event status */
+#define DMA_CCR_EVT_NO_STATUS 0x00000000
+#define DMA_CCR_EVT_UNDERRUN 0x00000001
+#define DMA_CCR_EVT_OVERRUN 0x00000002
+#define DMA_CCR_EVT_DESP_READ 0x00000003
+#define DMA_CCR_EVT_DATA_RW 0x00000004
+#define DMA_CCR_EVT_EARLY_END 0x00000005
+#define DMA_CCR_EVT_SUCCESS 0x0000000F
+
+#define PDMA_READ 0x00
+#define PDMA_WRITE 0x01
+
+#define WMT_SD_POWER_OFF 0
+#define WMT_SD_POWER_ON 1
+
+struct wmt_dma_descriptor {
+ u32 flags;
+ u32 data_buffer_addr;
+ u32 branch_addr;
+ u32 reserved1;
+};
+
+struct wmt_mci_caps {
+ unsigned int f_min;
+ unsigned int f_max;
+ u32 ocr_avail;
+ u32 caps;
+ u32 max_seg_size;
+ u32 max_segs;
+ u32 max_blk_size;
+};
+
+struct wmt_mci_priv {
+ struct mmc_host *mmc;
+ void __iomem *sdmmc_base;
+
+ int irq_regular;
+ int irq_dma;
+
+ void *dma_desc_buffer;
+ dma_addr_t dma_desc_device_addr;
+
+ struct completion cmdcomp;
+ struct completion datacomp;
+
+ struct completion *comp_cmd;
+ struct completion *comp_dma;
+
+ struct mmc_request *req;
+ struct mmc_command *cmd;
+
+ struct clk *clk_sdmmc;
+ struct device *dev;
+
+ u8 power_inverted;
+ u8 cd_inverted;
+};
+
+static void wmt_set_sd_power(struct wmt_mci_priv *priv, int enable)
+{
+ u32 reg_tmp;
+ if (enable) {
+ if (priv->power_inverted) {
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp | BM_SD_OFF,
+ priv->sdmmc_base + SDMMC_BUSMODE);
+ } else {
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp & (~BM_SD_OFF),
+ priv->sdmmc_base + SDMMC_BUSMODE);
+ }
+ } else {
+ if (priv->power_inverted) {
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp & (~BM_SD_OFF),
+ priv->sdmmc_base + SDMMC_BUSMODE);
+ } else {
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp | BM_SD_OFF,
+ priv->sdmmc_base + SDMMC_BUSMODE);
+ }
+ }
+}
+
+static void wmt_mci_read_response(struct mmc_host *mmc)
+{
+ struct wmt_mci_priv *priv;
+ int idx1, idx2;
+ u8 tmp_resp;
+ u32 response;
+
+ priv = mmc_priv(mmc);
+
+ for (idx1 = 0; idx1 < 4; idx1++) {
+ response = 0;
+ for (idx2 = 0; idx2 < 4; idx2++) {
+ if ((idx1 == 3) && (idx2 == 3))
+ tmp_resp = readb(priv->sdmmc_base + SDMMC_RSP);
+ else
+ tmp_resp = readb(priv->sdmmc_base + SDMMC_RSP +
+ (idx1*4) + idx2 + 1);
+ response |= (tmp_resp << (idx2 * 8));
+ }
+ priv->cmd->resp[idx1] = cpu_to_be32(response);
+ }
+}
+
+static void wmt_mci_start_command(struct wmt_mci_priv *priv)
+{
+ u32 reg_tmp;
+
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR);
+ writeb(reg_tmp | CTLR_CMD_START, priv->sdmmc_base + SDMMC_CTLR);
+}
+
+static int wmt_mci_send_command(struct mmc_host *mmc, u8 command, u8 cmdtype,
+ u32 arg, u8 rsptype)
+{
+ struct wmt_mci_priv *priv;
+ u32 reg_tmp;
+
+ priv = mmc_priv(mmc);
+
+ /* write command, arg, resptype registers */
+ writeb(command, priv->sdmmc_base + SDMMC_CMD);
+ writel(arg, priv->sdmmc_base + SDMMC_ARG);
+ writeb(rsptype, priv->sdmmc_base + SDMMC_RSPTYPE);
+
+ /* reset response FIFO */
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR);
+ writeb(reg_tmp | CTLR_FIFO_RESET, priv->sdmmc_base + SDMMC_CTLR);
+
+ /* ensure clock enabled - VT3465 */
+ wmt_set_sd_power(priv, WMT_SD_POWER_ON);
+
+ /* clear status bits */
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS0);
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS1);
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS2);
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS3);
+
+ /* set command type */
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR);
+ writeb((reg_tmp & 0x0F) | (cmdtype << 4),
+ priv->sdmmc_base + SDMMC_CTLR);
+
+ return 0;
+}
+
+static void wmt_mci_disable_dma(struct wmt_mci_priv *priv)
+{
+ writel(DMA_ISR_INT_STS, priv->sdmmc_base + SDDMA_ISR);
+ writel(0, priv->sdmmc_base + SDDMA_IER);
+}
+
+static void wmt_complete_data_request(struct wmt_mci_priv *priv)
+{
+ struct mmc_request *req;
+ req = priv->req;
+
+ req->data->bytes_xfered = req->data->blksz * req->data->blocks;
+
+ /* unmap the DMA pages used for write data */
+ if (req->data->flags & MMC_DATA_WRITE)
+ dma_unmap_sg(mmc_dev(priv->mmc), req->data->sg,
+ req->data->sg_len, DMA_TO_DEVICE);
+ else
+ dma_unmap_sg(mmc_dev(priv->mmc), req->data->sg,
+ req->data->sg_len, DMA_FROM_DEVICE);
+
+ /* Check if the DMA ISR returned a data error */
+ if ((req->cmd->error) || (req->data->error))
+ mmc_request_done(priv->mmc, req);
+ else {
+ wmt_mci_read_response(priv->mmc);
+ if (!req->data->stop) {
+ /* single-block read/write requests end here */
+ mmc_request_done(priv->mmc, req);
+ } else {
+ /*
+ * we change the priv->cmd variable so the response is
+ * stored in the stop struct rather than the original
+ * calling command struct
+ */
+ priv->comp_cmd = &priv->cmdcomp;
+ init_completion(priv->comp_cmd);
+ priv->cmd = req->data->stop;
+ wmt_mci_send_command(priv->mmc, req->data->stop->opcode,
+ 7, req->data->stop->arg, 9);
+ wmt_mci_start_command(priv);
+ }
+ }
+}
+
+static irqreturn_t wmt_mci_dma_isr(int irq_num, void *data)
+{
+ struct mmc_host *mmc;
+ struct wmt_mci_priv *priv;
+
+ int status;
+
+ priv = (struct wmt_mci_priv *)data;
+ mmc = priv->mmc;
+
+ status = readl(priv->sdmmc_base + SDDMA_CCR) & 0x0F;
+
+ if (status != DMA_CCR_EVT_SUCCESS) {
+ dev_err(priv->dev, "DMA Error: Status = %d\n", status);
+ priv->req->data->error = -ETIMEDOUT;
+ complete(priv->comp_dma);
+ return IRQ_HANDLED;
+ }
+
+ priv->req->data->error = 0;
+
+ wmt_mci_disable_dma(priv);
+
+ complete(priv->comp_dma);
+
+ if (priv->comp_cmd) {
+ if (completion_done(priv->comp_cmd)) {
+ /*
+ * if the command (regular) interrupt has already
+ * completed, finish off the request otherwise we wait
+ * for the command interrupt and finish from there.
+ */
+ wmt_complete_data_request(priv);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wmt_mci_regular_isr(int irq_num, void *data)
+{
+ struct wmt_mci_priv *priv;
+ u32 status0;
+ u32 status1;
+ u32 status2;
+ u32 reg_tmp;
+ int cmd_done;
+
+ priv = (struct wmt_mci_priv *)data;
+ cmd_done = 0;
+ status0 = readb(priv->sdmmc_base + SDMMC_STS0);
+ status1 = readb(priv->sdmmc_base + SDMMC_STS1);
+ status2 = readb(priv->sdmmc_base + SDMMC_STS2);
+
+ /* Check for card insertion */
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_INTMASK0);
+ if ((reg_tmp & INT0_DI_INT_EN) && (status0 & STS0_DEVICE_INS)) {
+ mmc_detect_change(priv->mmc, 0);
+ if (priv->cmd)
+ priv->cmd->error = -ETIMEDOUT;
+ if (priv->comp_cmd)
+ complete(priv->comp_cmd);
+ if (priv->comp_dma) {
+ wmt_mci_disable_dma(priv);
+ complete(priv->comp_dma);
+ }
+ writeb(STS0_DEVICE_INS, priv->sdmmc_base + SDMMC_STS0);
+ return IRQ_HANDLED;
+ }
+
+ if ((!priv->req->data) ||
+ ((priv->req->data->stop) && (priv->cmd == priv->req->data->stop))) {
+ /* handle non-data & stop_transmission requests */
+ if (status1 & STS1_CMDRSP_DONE) {
+ priv->cmd->error = 0;
+ cmd_done = 1;
+ } else if ((status1 & STS1_RSP_TIMEOUT) ||
+ (status1 & STS1_DATA_TIMEOUT)) {
+ priv->cmd->error = -ETIMEDOUT;
+ cmd_done = 1;
+ }
+
+ if (cmd_done) {
+ priv->comp_cmd = NULL;
+
+ if (!priv->cmd->error)
+ wmt_mci_read_response(priv->mmc);
+
+ priv->cmd = NULL;
+
+ mmc_request_done(priv->mmc, priv->req);
+ }
+ } else {
+ /* handle data requests */
+ if (status1 & STS1_CMDRSP_DONE) {
+ if (priv->cmd)
+ priv->cmd->error = 0;
+ if (priv->comp_cmd)
+ complete(priv->comp_cmd);
+ }
+
+ if ((status1 & STS1_RSP_TIMEOUT) ||
+ (status1 & STS1_DATA_TIMEOUT)) {
+ if (priv->cmd)
+ priv->cmd->error = -ETIMEDOUT;
+ if (priv->comp_cmd)
+ complete(priv->comp_cmd);
+ if (priv->comp_dma) {
+ wmt_mci_disable_dma(priv);
+ complete(priv->comp_dma);
+ }
+ }
+
+ if (priv->comp_dma) {
+ /*
+ * If the dma interrupt has already completed, finish
+ * off the request; otherwise we wait for the DMA
+ * interrupt and finish from there.
+ */
+ if (completion_done(priv->comp_dma))
+ wmt_complete_data_request(priv);
+ }
+ }
+
+ writeb(status0, priv->sdmmc_base + SDMMC_STS0);
+ writeb(status1, priv->sdmmc_base + SDMMC_STS1);
+ writeb(status2, priv->sdmmc_base + SDMMC_STS2);
+
+ return IRQ_HANDLED;
+}
+
+static void wmt_reset_hardware(struct mmc_host *mmc)
+{
+ struct wmt_mci_priv *priv;
+ u32 reg_tmp;
+
+ priv = mmc_priv(mmc);
+
+ /* reset controller */
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base + SDMMC_BUSMODE);
+
+ /* reset response FIFO */
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_CTLR);
+ writeb(reg_tmp | CTLR_FIFO_RESET, priv->sdmmc_base + SDMMC_CTLR);
+
+ /* enable GPI pin to detect card */
+ writew(BLKL_INT_ENABLE | BLKL_GPI_CD, priv->sdmmc_base + SDMMC_BLKLEN);
+
+ /* clear interrupt status */
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS0);
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS1);
+
+ /* setup interrupts */
+ writeb(INT0_CD_INT_EN | INT0_DI_INT_EN, priv->sdmmc_base +
+ SDMMC_INTMASK0);
+ writeb(INT1_DATA_TOUT_INT_EN | INT1_CMD_RES_TRAN_DONE_INT_EN |
+ INT1_CMD_RES_TOUT_INT_EN, priv->sdmmc_base + SDMMC_INTMASK1);
+
+ /* set the DMA timeout */
+ writew(8191, priv->sdmmc_base + SDMMC_DMATIMEOUT);
+
+ /* auto clock freezing enable */
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_STS2);
+ writeb(reg_tmp | STS2_DIS_FORCECLK, priv->sdmmc_base + SDMMC_STS2);
+
+ /* set a default clock speed of 400Khz */
+ clk_set_rate(priv->clk_sdmmc, 400000);
+}
+
+static int wmt_dma_init(struct mmc_host *mmc)
+{
+ struct wmt_mci_priv *priv;
+
+ priv = mmc_priv(mmc);
+
+ writel(DMA_GCR_SOFT_RESET, priv->sdmmc_base + SDDMA_GCR);
+ writel(DMA_GCR_DMA_EN, priv->sdmmc_base + SDDMA_GCR);
+ if ((readl(priv->sdmmc_base + SDDMA_GCR) & DMA_GCR_DMA_EN) != 0)
+ return 0;
+ else
+ return 1;
+}
+
+static void wmt_dma_init_descriptor(struct wmt_dma_descriptor *desc,
+ u16 req_count, u32 buffer_addr, u32 branch_addr, int end)
+{
+ desc->flags = 0x40000000 | req_count;
+ if (end)
+ desc->flags |= 0x80000000;
+ desc->data_buffer_addr = buffer_addr;
+ desc->branch_addr = branch_addr;
+}
+
+static void wmt_dma_config(struct mmc_host *mmc, u32 descaddr, u8 dir)
+{
+ struct wmt_mci_priv *priv;
+ u32 reg_tmp;
+
+ priv = mmc_priv(mmc);
+
+ /* Enable DMA Interrupts */
+ writel(DMA_IER_INT_EN, priv->sdmmc_base + SDDMA_IER);
+
+ /* Write DMA Descriptor Pointer Register */
+ writel(descaddr, priv->sdmmc_base + SDDMA_DESPR);
+
+ writel(0x00, priv->sdmmc_base + SDDMA_CCR);
+
+ if (dir == PDMA_WRITE) {
+ reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR);
+ writel(reg_tmp & DMA_CCR_IF_TO_PERIPHERAL, priv->sdmmc_base +
+ SDDMA_CCR);
+ } else {
+ reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR);
+ writel(reg_tmp | DMA_CCR_PERIPHERAL_TO_IF, priv->sdmmc_base +
+ SDDMA_CCR);
+ }
+}
+
+static void wmt_dma_start(struct wmt_mci_priv *priv)
+{
+ u32 reg_tmp;
+
+ reg_tmp = readl(priv->sdmmc_base + SDDMA_CCR);
+ writel(reg_tmp | DMA_CCR_RUN, priv->sdmmc_base + SDDMA_CCR);
+}
+
+static void wmt_mci_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+ struct wmt_mci_priv *priv;
+ struct wmt_dma_descriptor *desc;
+ u8 command;
+ u8 cmdtype;
+ u32 arg;
+ u8 rsptype;
+ u32 reg_tmp;
+
+ struct scatterlist *sg;
+ int i;
+ int sg_cnt;
+ int offset;
+ u32 dma_address;
+ int desc_cnt;
+
+ priv = mmc_priv(mmc);
+ priv->req = req;
+
+ /*
+ * Use the cmd variable to pass a pointer to the resp[] structure
+ * This is required on multi-block requests to pass the pointer to the
+ * stop command
+ */
+ priv->cmd = req->cmd;
+
+ command = req->cmd->opcode;
+ arg = req->cmd->arg;
+ rsptype = mmc_resp_type(req->cmd);
+ cmdtype = 0;
+
+ /* rsptype=7 only valid for SPI commands - should be =2 for SD */
+ if (rsptype == 7)
+ rsptype = 2;
+ /* rsptype=21 is R1B, convert for controller */
+ if (rsptype == 21)
+ rsptype = 9;
+
+ if (!req->data) {
+ wmt_mci_send_command(mmc, command, cmdtype, arg, rsptype);
+ wmt_mci_start_command(priv);
+ /* completion is now handled in the regular_isr() */
+ }
+ if (req->data) {
+ priv->comp_cmd = &priv->cmdcomp;
+ init_completion(priv->comp_cmd);
+
+ wmt_dma_init(mmc);
+
+ /* set controller data length */
+ reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN);
+ writew((reg_tmp & 0xF800) | (req->data->blksz - 1),
+ priv->sdmmc_base + SDMMC_BLKLEN);
+
+ /* set controller block count */
+ writew(req->data->blocks, priv->sdmmc_base + SDMMC_BLKCNT);
+
+ desc = (struct wmt_dma_descriptor *)priv->dma_desc_buffer;
+
+ if (req->data->flags & MMC_DATA_WRITE) {
+ sg_cnt = dma_map_sg(mmc_dev(mmc), req->data->sg,
+ req->data->sg_len, DMA_TO_DEVICE);
+ cmdtype = 1;
+ if (req->data->blocks > 1)
+ cmdtype = 3;
+ } else {
+ sg_cnt = dma_map_sg(mmc_dev(mmc), req->data->sg,
+ req->data->sg_len, DMA_FROM_DEVICE);
+ cmdtype = 2;
+ if (req->data->blocks > 1)
+ cmdtype = 4;
+ }
+
+ dma_address = priv->dma_desc_device_addr + 16;
+ desc_cnt = 0;
+
+ for_each_sg(req->data->sg, sg, sg_cnt, i) {
+ offset = 0;
+ while (offset < sg_dma_len(sg)) {
+ wmt_dma_init_descriptor(desc, req->data->blksz,
+ sg_dma_address(sg)+offset,
+ dma_address, 0);
+ desc++;
+ desc_cnt++;
+ offset += req->data->blksz;
+ dma_address += 16;
+ if (desc_cnt == req->data->blocks)
+ break;
+ }
+ }
+ desc--;
+ desc->flags |= 0x80000000;
+
+ if (req->data->flags & MMC_DATA_WRITE)
+ wmt_dma_config(mmc, priv->dma_desc_device_addr,
+ PDMA_WRITE);
+ else
+ wmt_dma_config(mmc, priv->dma_desc_device_addr,
+ PDMA_READ);
+
+ wmt_mci_send_command(mmc, command, cmdtype, arg, rsptype);
+
+ priv->comp_dma = &priv->datacomp;
+ init_completion(priv->comp_dma);
+
+ wmt_dma_start(priv);
+ wmt_mci_start_command(priv);
+ }
+}
+
+static void wmt_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct wmt_mci_priv *priv;
+ u32 reg_tmp;
+
+ priv = mmc_priv(mmc);
+
+ if (ios->power_mode == MMC_POWER_UP) {
+ wmt_reset_hardware(mmc);
+
+ wmt_set_sd_power(priv, WMT_SD_POWER_ON);
+ }
+ if (ios->power_mode == MMC_POWER_OFF)
+ wmt_set_sd_power(priv, WMT_SD_POWER_OFF);
+
+ if (ios->clock != 0)
+ clk_set_rate(priv->clk_sdmmc, ios->clock);
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_8:
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL);
+ writeb(reg_tmp | 0x04, priv->sdmmc_base + SDMMC_EXTCTRL);
+ break;
+ case MMC_BUS_WIDTH_4:
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp | BM_FOURBIT_MODE, priv->sdmmc_base +
+ SDMMC_BUSMODE);
+
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL);
+ writeb(reg_tmp & 0xFB, priv->sdmmc_base + SDMMC_EXTCTRL);
+ break;
+ case MMC_BUS_WIDTH_1:
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp & BM_ONEBIT_MASK, priv->sdmmc_base +
+ SDMMC_BUSMODE);
+
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL);
+ writeb(reg_tmp & 0xFB, priv->sdmmc_base + SDMMC_EXTCTRL);
+ break;
+ }
+}
+
+static int wmt_mci_get_ro(struct mmc_host *mmc)
+{
+ struct wmt_mci_priv *priv = mmc_priv(mmc);
+
+ return !(readb(priv->sdmmc_base + SDMMC_STS0) & STS0_WRITE_PROTECT);
+}
+
+static int wmt_mci_get_cd(struct mmc_host *mmc)
+{
+ struct wmt_mci_priv *priv = mmc_priv(mmc);
+ u32 cd = (readb(priv->sdmmc_base + SDMMC_STS0) & STS0_CD_GPI) >> 3;
+
+ return !(cd ^ priv->cd_inverted);
+}
+
+static struct mmc_host_ops wmt_mci_ops = {
+ .request = wmt_mci_request,
+ .set_ios = wmt_mci_set_ios,
+ .get_ro = wmt_mci_get_ro,
+ .get_cd = wmt_mci_get_cd,
+};
+
+/* Controller capabilities */
+static struct wmt_mci_caps wm8505_caps = {
+ .f_min = 390425,
+ .f_max = 50000000,
+ .ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED,
+ .max_seg_size = 65024,
+ .max_segs = 128,
+ .max_blk_size = 2048,
+};
+
+static struct of_device_id wmt_mci_dt_ids[] = {
+ { .compatible = "wm,wm8505-sdhc", .data = &wm8505_caps },
+ { /* Sentinel */ },
+};
+
+static int __devinit wmt_mci_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct wmt_mci_priv *priv;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(wmt_mci_dt_ids, &pdev->dev);
+ const struct wmt_mci_caps *wmt_caps = of_id->data;
+ int ret;
+ int regular_irq, dma_irq;
+
+ if (!of_id || !of_id->data) {
+ dev_err(&pdev->dev, "Controller capabilities data missing\n");
+ return -EFAULT;
+ }
+
+ if (!np) {
+ dev_err(&pdev->dev, "Missing SDMMC description in devicetree\n");
+ return -EFAULT;
+ }
+
+ regular_irq = irq_of_parse_and_map(np, 0);
+ dma_irq = irq_of_parse_and_map(np, 1);
+
+ if (!regular_irq || !dma_irq) {
+ dev_err(&pdev->dev, "Getting IRQs failed!\n");
+ ret = -ENXIO;
+ goto fail1;
+ }
+
+ mmc = mmc_alloc_host(sizeof(struct wmt_mci_priv), &pdev->dev);
+ if (!mmc) {
+ dev_err(&pdev->dev, "Failed to allocate mmc_host\n");
+ ret = -ENOMEM;
+ goto fail1;
+ }
+
+ mmc->ops = &wmt_mci_ops;
+ mmc->f_min = wmt_caps->f_min;
+ mmc->f_max = wmt_caps->f_max;
+ mmc->ocr_avail = wmt_caps->ocr_avail;
+ mmc->caps = wmt_caps->caps;
+
+ mmc->max_seg_size = wmt_caps->max_seg_size;
+ mmc->max_segs = wmt_caps->max_segs;
+ mmc->max_blk_size = wmt_caps->max_blk_size;
+
+ mmc->max_req_size = (16*512*mmc->max_segs);
+ mmc->max_blk_count = mmc->max_req_size / 512;
+
+ priv = mmc_priv(mmc);
+ priv->mmc = mmc;
+ priv->dev = &pdev->dev;
+
+ priv->power_inverted = 0;
+ priv->cd_inverted = 0;
+
+ if (of_get_property(np, "sdon-inverted", NULL))
+ priv->power_inverted = 1;
+ if (of_get_property(np, "cd-inverted", NULL))
+ priv->cd_inverted = 1;
+
+ priv->sdmmc_base = of_iomap(np, 0);
+ if (!priv->sdmmc_base) {
+ dev_err(&pdev->dev, "Failed to map IO space\n");
+ ret = -ENOMEM;
+ goto fail2;
+ }
+
+ priv->irq_regular = regular_irq;
+ priv->irq_dma = dma_irq;
+
+ ret = request_irq(regular_irq, wmt_mci_regular_isr, 0, "sdmmc", priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Register regular IRQ fail\n");
+ goto fail3;
+ }
+
+ ret = request_irq(dma_irq, wmt_mci_dma_isr, 32, "sdmmc", priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Register DMA IRQ fail\n");
+ goto fail4;
+ }
+
+ /* alloc some DMA buffers for descriptors/transfers */
+ priv->dma_desc_buffer = dma_alloc_coherent(&pdev->dev,
+ mmc->max_blk_count * 16,
+ &priv->dma_desc_device_addr,
+ 208);
+ if (!priv->dma_desc_buffer) {
+ dev_err(&pdev->dev, "DMA alloc fail\n");
+ ret = -EPERM;
+ goto fail5;
+ }
+
+ platform_set_drvdata(pdev, mmc);
+
+ priv->clk_sdmmc = of_clk_get(np, 0);
+ if (IS_ERR(priv->clk_sdmmc)) {
+ dev_err(&pdev->dev, "Error getting clock\n");
+ ret = PTR_ERR(priv->clk_sdmmc);
+ goto fail5;
+ }
+
+ clk_prepare_enable(priv->clk_sdmmc);
+
+ /* configure the controller to a known 'ready' state */
+ wmt_reset_hardware(mmc);
+
+ mmc_add_host(mmc);
+
+ dev_info(&pdev->dev, "WMT SDHC Controller initialized\n");
+
+ return 0;
+fail5:
+ free_irq(dma_irq, priv);
+fail4:
+ free_irq(regular_irq, priv);
+fail3:
+ iounmap(priv->sdmmc_base);
+fail2:
+ mmc_free_host(mmc);
+fail1:
+ return ret;
+}
+
+static int __devexit wmt_mci_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct wmt_mci_priv *priv;
+ struct resource *res;
+ u32 reg_tmp;
+
+ mmc = platform_get_drvdata(pdev);
+ priv = mmc_priv(mmc);
+
+ /* reset SD controller */
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writel(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base + SDMMC_BUSMODE);
+ reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN);
+ writew(reg_tmp & ~(0xA000), priv->sdmmc_base + SDMMC_BLKLEN);
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS0);
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS1);
+
+ /* release the dma buffers */
+ dma_free_coherent(&pdev->dev, priv->mmc->max_blk_count * 16,
+ priv->dma_desc_buffer, priv->dma_desc_device_addr);
+
+ mmc_remove_host(mmc);
+
+ free_irq(priv->irq_regular, priv);
+ free_irq(priv->irq_dma, priv);
+
+ iounmap(priv->sdmmc_base);
+
+ clk_disable_unprepare(priv->clk_sdmmc);
+ clk_put(priv->clk_sdmmc);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ mmc_free_host(mmc);
+
+ platform_set_drvdata(pdev, NULL);
+
+ dev_info(&pdev->dev, "WMT MCI device removed\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int wmt_mci_suspend(struct device *dev)
+{
+ u32 reg_tmp;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct wmt_mci_priv *priv;
+ int ret;
+
+ if (!mmc)
+ return 0;
+
+ priv = mmc_priv(mmc);
+ ret = mmc_suspend_host(mmc);
+
+ if (!ret) {
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base +
+ SDMMC_BUSMODE);
+
+ reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN);
+ writew(reg_tmp & 0x5FFF, priv->sdmmc_base + SDMMC_BLKLEN);
+
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS0);
+ writeb(0xFF, priv->sdmmc_base + SDMMC_STS1);
+
+ clk_disable(priv->clk_sdmmc);
+ }
+ return ret;
+}
+
+static int wmt_mci_resume(struct device *dev)
+{
+ u32 reg_tmp;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct wmt_mci_priv *priv;
+ int ret = 0;
+
+ if (mmc) {
+ priv = mmc_priv(mmc);
+ clk_enable(priv->clk_sdmmc);
+
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE);
+ writeb(reg_tmp | BM_SOFT_RESET, priv->sdmmc_base +
+ SDMMC_BUSMODE);
+
+ reg_tmp = readw(priv->sdmmc_base + SDMMC_BLKLEN);
+ writew(reg_tmp | (BLKL_GPI_CD | BLKL_INT_ENABLE),
+ priv->sdmmc_base + SDMMC_BLKLEN);
+
+ reg_tmp = readb(priv->sdmmc_base + SDMMC_INTMASK0);
+ writeb(reg_tmp | INT0_DI_INT_EN, priv->sdmmc_base +
+ SDMMC_INTMASK0);
+
+ ret = mmc_resume_host(mmc);
+ }
+
+ return ret;
+}
+
+static const struct dev_pm_ops wmt_mci_pm = {
+ .suspend = wmt_mci_suspend,
+ .resume = wmt_mci_resume,
+};
+
+#define wmt_mci_pm_ops (&wmt_mci_pm)
+
+#else /* !CONFIG_PM */
+
+#define wmt_mci_pm_ops NULL
+
+#endif
+
+static struct platform_driver wmt_mci_driver = {
+ .probe = wmt_mci_probe,
+ .remove = __exit_p(wmt_mci_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .pm = wmt_mci_pm_ops,
+ .of_match_table = wmt_mci_dt_ids,
+ },
+};
+
+module_platform_driver(wmt_mci_driver);
+
+MODULE_DESCRIPTION("Wondermedia MMC/SD Driver");
+MODULE_AUTHOR("Tony Prisk");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_mci_dt_ids);