Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
add v2 FW logging for ice driver

Paul Stillwell says:

Firmware (FW) log support was added to the ice driver, but that version is
no longer supported. There is a newer version of FW logging (v2) that
adds more control knobs to get the exact data out of the FW
for debugging.

The interface for FW logging is debugfs. This was chosen based on
discussions here:
https://lore.kernel.org/netdev/20230214180712.53fc8ba2@kernel.org/ and
https://lore.kernel.org/netdev/20231012164033.1069fb4b@kernel.org/

We talked about using devlink in a variety of ways, but none of those
options made any sense for the way the FW reports data. We briefly talked
about using ethtool, but that seemed to go by the wayside. Ultimately it
seems like using debugfs is the way to go so re-implement the code to use
that.

FW logging is across all the PFs on the device so restrict the commands to
only PF0.

If the device supports FW logging then a directory named 'fwlog' will be
created under '/sys/kernel/debug/ice/<pci_dev>'. A variety of files will be
created to manage the behavior of logging. The following files will be
created:
- modules/<module>
- nr_messages
- enable
- log_size
- data

where
modules/<module> is used to read/write the log level for a specific module

nr_messages is used to determine how many events should be in each message
sent to the driver

enable is used to start/stop FW logging. This is a boolean value so only 1
or 0 are permissible values

log_size is used to configure the amount of memory the driver uses for log
data

data is used to read/clear the log data

Generally there is a lot of data and dumping that data to syslog will
result in a loss of data. This causes problems when decoding the data and
the user doesn't know that data is missing until later. Instead of dumping
the FW log output to syslog use debugfs. This ensures that all the data the
driver has gets retrieved correctly.

The FW log data is binary data that the FW team decodes to determine what
happened in firmware. The binary blob is sent to Intel for decoding.
---
v6:
- use seq_printf() for outputting module info when reading from 'module' file
- replace code that created argc and argv for handling command line input
- removed checks in all the _read() and _write() functions to see if FW logging
  is supported because the files will not exist if it is not supported
- removed warnings on allocation failures on debugfs file creation failures
- removed a newline between memory allocation and checking if the memory was
  allocated
- fixed cases where we could just return the value from a function call
  instead of saving the value in a variable
- moved the check for PFO in ice_fwlog_init() to an earlier patch
- reworked all of argument scanning in the _write() functions in ice_debugfs.c
  to remove adding characters past the end of the buffer

v5: https://lore.kernel.org/netdev/20231205211251.2122874-1-anthony.l.nguyen@intel.com/
- changed the log level configuration from a single file for all modules to a
  file per module.
- changed 'nr_buffs' to 'log_size' because users understand memory sizes
  better than a number of buffers
- changed 'resolution' to 'nr_messages' to better reflect what it represents
- updated documentation to reflect these changes
- updated documentation to indicate that FW logging must be disabled to
  clear the data. also clarified that any value written to the 'data' file will
  clear the data

v4: https://lore.kernel.org/netdev/20231005170110.3221306-1-anthony.l.nguyen@intel.com/
- removed CONFIG_DEBUG_FS wrapper around code because the debugfs calls handle
  this case already
- moved ice_debugfs_exit() call to remove unreachable code issue
- minor changes to documentation based on feedback

v3: https://lore.kernel.org/netdev/20230815165750.2789609-1-anthony.l.nguyen@intel.com/
- Adjust error path cleanup in ice_module_init() for unreachable code.

v2: https://lore.kernel.org/netdev/20230810170109.1963832-1-anthony.l.nguyen@intel.com/
- Rewrote code to use debugfs instead of devlink

v1: https://lore.kernel.org/netdev/20230209190702.3638688-1-anthony.l.nguyen@intel.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

10 files changed, 1366 insertions, 315 deletions

diff --git a/drivers/net/ethernet/intel/ice/Makefile b/drivers/net/ethernet/intel/ice/Makefile
index b40b4179b9f4..cddd82d4ca0f 100644
--- a/drivers/net/ethernet/intel/ice/Makefile
+++ b/drivers/net/ethernet/intel/ice/Makefile
@@ -34,7 +34,9 @@ ice-y := ice_main.o	\
 	 ice_lag.o	\
 	 ice_ethtool.o  \
 	 ice_repr.o	\
-	 ice_tc_lib.o
+	 ice_tc_lib.o	\
+	 ice_fwlog.o	\
+	 ice_debugfs.o
 ice-$(CONFIG_PCI_IOV) +=	\
 	ice_sriov.o		\
 	ice_virtchnl.o		\
diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 2b3aa37df4f3..50304e4a4fb0 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -571,6 +571,10 @@ struct ice_pf {
 	struct ice_vsi_stats **vsi_stats;
 	struct ice_sw *first_sw;	/* first switch created by firmware */
 	u16 eswitch_mode;		/* current mode of eswitch */
+	struct dentry *ice_debugfs_pf;
+	struct dentry *ice_debugfs_pf_fwlog;
+	/* keep track of all the dentrys for FW log modules */
+	struct dentry **ice_debugfs_pf_fwlog_modules;
 	struct ice_vfs vfs;
 	DECLARE_BITMAP(features, ICE_F_MAX);
 	DECLARE_BITMAP(state, ICE_STATE_NBITS);
@@ -890,6 +894,11 @@ static inline bool ice_is_adq_active(struct ice_pf *pf)
 	return false;
 }
 
+void ice_debugfs_fwlog_init(struct ice_pf *pf);
+void ice_debugfs_init(void);
+void ice_debugfs_exit(void);
+void ice_pf_fwlog_update_module(struct ice_pf *pf, int log_level, int module);
+
 bool netif_is_ice(const struct net_device *dev);
 int ice_vsi_setup_tx_rings(struct ice_vsi *vsi);
 int ice_vsi_setup_rx_rings(struct ice_vsi *vsi);
diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index adf7a5c78f85..12c510bb1d9b 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -2094,78 +2094,6 @@ struct ice_aqc_add_rdma_qset_data {
 	struct ice_aqc_add_tx_rdma_qset_entry rdma_qsets[];
 };
 
-/* Configure Firmware Logging Command (indirect 0xFF09)
- * Logging Information Read Response (indirect 0xFF10)
- * Note: The 0xFF10 command has no input parameters.
- */
-struct ice_aqc_fw_logging {
-	u8 log_ctrl;
-#define ICE_AQC_FW_LOG_AQ_EN		BIT(0)
-#define ICE_AQC_FW_LOG_UART_EN		BIT(1)
-	u8 rsvd0;
-	u8 log_ctrl_valid; /* Not used by 0xFF10 Response */
-#define ICE_AQC_FW_LOG_AQ_VALID		BIT(0)
-#define ICE_AQC_FW_LOG_UART_VALID	BIT(1)
-	u8 rsvd1[5];
-	__le32 addr_high;
-	__le32 addr_low;
-};
-
-enum ice_aqc_fw_logging_mod {
-	ICE_AQC_FW_LOG_ID_GENERAL = 0,
-	ICE_AQC_FW_LOG_ID_CTRL,
-	ICE_AQC_FW_LOG_ID_LINK,
-	ICE_AQC_FW_LOG_ID_LINK_TOPO,
-	ICE_AQC_FW_LOG_ID_DNL,
-	ICE_AQC_FW_LOG_ID_I2C,
-	ICE_AQC_FW_LOG_ID_SDP,
-	ICE_AQC_FW_LOG_ID_MDIO,
-	ICE_AQC_FW_LOG_ID_ADMINQ,
-	ICE_AQC_FW_LOG_ID_HDMA,
-	ICE_AQC_FW_LOG_ID_LLDP,
-	ICE_AQC_FW_LOG_ID_DCBX,
-	ICE_AQC_FW_LOG_ID_DCB,
-	ICE_AQC_FW_LOG_ID_NETPROXY,
-	ICE_AQC_FW_LOG_ID_NVM,
-	ICE_AQC_FW_LOG_ID_AUTH,
-	ICE_AQC_FW_LOG_ID_VPD,
-	ICE_AQC_FW_LOG_ID_IOSF,
-	ICE_AQC_FW_LOG_ID_PARSER,
-	ICE_AQC_FW_LOG_ID_SW,
-	ICE_AQC_FW_LOG_ID_SCHEDULER,
-	ICE_AQC_FW_LOG_ID_TXQ,
-	ICE_AQC_FW_LOG_ID_RSVD,
-	ICE_AQC_FW_LOG_ID_POST,
-	ICE_AQC_FW_LOG_ID_WATCHDOG,
-	ICE_AQC_FW_LOG_ID_TASK_DISPATCH,
-	ICE_AQC_FW_LOG_ID_MNG,
-	ICE_AQC_FW_LOG_ID_MAX,
-};
-
-/* Defines for both above FW logging command/response buffers */
-#define ICE_AQC_FW_LOG_ID_S		0
-#define ICE_AQC_FW_LOG_ID_M		(0xFFF << ICE_AQC_FW_LOG_ID_S)
-
-#define ICE_AQC_FW_LOG_CONF_SUCCESS	0	/* Used by response */
-#define ICE_AQC_FW_LOG_CONF_BAD_INDX	BIT(12)	/* Used by response */
-
-#define ICE_AQC_FW_LOG_EN_S		12
-#define ICE_AQC_FW_LOG_EN_M		(0xF << ICE_AQC_FW_LOG_EN_S)
-#define ICE_AQC_FW_LOG_INFO_EN		BIT(12)	/* Used by command */
-#define ICE_AQC_FW_LOG_INIT_EN		BIT(13)	/* Used by command */
-#define ICE_AQC_FW_LOG_FLOW_EN		BIT(14)	/* Used by command */
-#define ICE_AQC_FW_LOG_ERR_EN		BIT(15)	/* Used by command */
-
-/* Get/Clear FW Log (indirect 0xFF11) */
-struct ice_aqc_get_clear_fw_log {
-	u8 flags;
-#define ICE_AQC_FW_LOG_CLEAR		BIT(0)
-#define ICE_AQC_FW_LOG_MORE_DATA_AVAIL	BIT(1)
-	u8 rsvd1[7];
-	__le32 addr_high;
-	__le32 addr_low;
-};
-
 /* Download Package (indirect 0x0C40) */
 /* Also used for Update Package (indirect 0x0C41 and 0x0C42) */
 struct ice_aqc_download_pkg {
@@ -2428,6 +2356,84 @@ struct ice_aqc_event_lan_overflow {
 	u8 reserved[8];
 };
 
+enum ice_aqc_fw_logging_mod {
+	ICE_AQC_FW_LOG_ID_GENERAL = 0,
+	ICE_AQC_FW_LOG_ID_CTRL,
+	ICE_AQC_FW_LOG_ID_LINK,
+	ICE_AQC_FW_LOG_ID_LINK_TOPO,
+	ICE_AQC_FW_LOG_ID_DNL,
+	ICE_AQC_FW_LOG_ID_I2C,
+	ICE_AQC_FW_LOG_ID_SDP,
+	ICE_AQC_FW_LOG_ID_MDIO,
+	ICE_AQC_FW_LOG_ID_ADMINQ,
+	ICE_AQC_FW_LOG_ID_HDMA,
+	ICE_AQC_FW_LOG_ID_LLDP,
+	ICE_AQC_FW_LOG_ID_DCBX,
+	ICE_AQC_FW_LOG_ID_DCB,
+	ICE_AQC_FW_LOG_ID_XLR,
+	ICE_AQC_FW_LOG_ID_NVM,
+	ICE_AQC_FW_LOG_ID_AUTH,
+	ICE_AQC_FW_LOG_ID_VPD,
+	ICE_AQC_FW_LOG_ID_IOSF,
+	ICE_AQC_FW_LOG_ID_PARSER,
+	ICE_AQC_FW_LOG_ID_SW,
+	ICE_AQC_FW_LOG_ID_SCHEDULER,
+	ICE_AQC_FW_LOG_ID_TXQ,
+	ICE_AQC_FW_LOG_ID_RSVD,
+	ICE_AQC_FW_LOG_ID_POST,
+	ICE_AQC_FW_LOG_ID_WATCHDOG,
+	ICE_AQC_FW_LOG_ID_TASK_DISPATCH,
+	ICE_AQC_FW_LOG_ID_MNG,
+	ICE_AQC_FW_LOG_ID_SYNCE,
+	ICE_AQC_FW_LOG_ID_HEALTH,
+	ICE_AQC_FW_LOG_ID_TSDRV,
+	ICE_AQC_FW_LOG_ID_PFREG,
+	ICE_AQC_FW_LOG_ID_MDLVER,
+	ICE_AQC_FW_LOG_ID_MAX,
+};
+
+/* Set FW Logging configuration (indirect 0xFF30)
+ * Register for FW Logging (indirect 0xFF31)
+ * Query FW Logging (indirect 0xFF32)
+ * FW Log Event (indirect 0xFF33)
+ */
+struct ice_aqc_fw_log {
+	u8 cmd_flags;
+#define ICE_AQC_FW_LOG_CONF_UART_EN	BIT(0)
+#define ICE_AQC_FW_LOG_CONF_AQ_EN	BIT(1)
+#define ICE_AQC_FW_LOG_QUERY_REGISTERED	BIT(2)
+#define ICE_AQC_FW_LOG_CONF_SET_VALID	BIT(3)
+#define ICE_AQC_FW_LOG_AQ_REGISTER	BIT(0)
+#define ICE_AQC_FW_LOG_AQ_QUERY		BIT(2)
+
+	u8 rsp_flag;
+	__le16 fw_rt_msb;
+	union {
+		struct {
+			__le32 fw_rt_lsb;
+		} sync;
+		struct {
+			__le16 log_resolution;
+#define ICE_AQC_FW_LOG_MIN_RESOLUTION		(1)
+#define ICE_AQC_FW_LOG_MAX_RESOLUTION		(128)
+
+			__le16 mdl_cnt;
+		} cfg;
+	} ops;
+	__le32 addr_high;
+	__le32 addr_low;
+};
+
+/* Response Buffer for:
+ *    Set Firmware Logging Configuration (0xFF30)
+ *    Query FW Logging (0xFF32)
+ */
+struct ice_aqc_fw_log_cfg_resp {
+	__le16 module_identifier;
+	u8 log_level;
+	u8 rsvd0;
+};
+
 /**
  * struct ice_aq_desc - Admin Queue (AQ) descriptor
  * @flags: ICE_AQ_FLAG_* flags
@@ -2507,8 +2513,6 @@ struct ice_aq_desc {
 		struct ice_aqc_add_rdma_qset add_rdma_qset;
 		struct ice_aqc_add_get_update_free_vsi vsi_cmd;
 		struct ice_aqc_add_update_free_vsi_resp add_update_free_vsi_res;
-		struct ice_aqc_fw_logging fw_logging;
-		struct ice_aqc_get_clear_fw_log get_clear_fw_log;
 		struct ice_aqc_download_pkg download_pkg;
 		struct ice_aqc_set_cgu_input_config set_cgu_input_config;
 		struct ice_aqc_get_cgu_input_config get_cgu_input_config;
@@ -2520,6 +2524,7 @@ struct ice_aq_desc {
 		struct ice_aqc_get_cgu_ref_prio get_cgu_ref_prio;
 		struct ice_aqc_get_cgu_info get_cgu_info;
 		struct ice_aqc_driver_shared_params drv_shared_params;
+		struct ice_aqc_fw_log fw_log;
 		struct ice_aqc_set_mac_lb set_mac_lb;
 		struct ice_aqc_alloc_free_res_cmd sw_res_ctrl;
 		struct ice_aqc_set_mac_cfg set_mac_cfg;
@@ -2718,9 +2723,11 @@ enum ice_adminq_opc {
 	/* Standalone Commands/Events */
 	ice_aqc_opc_event_lan_overflow			= 0x1001,
 
-	/* debug commands */
-	ice_aqc_opc_fw_logging				= 0xFF09,
-	ice_aqc_opc_fw_logging_info			= 0xFF10,
+	/* FW Logging Commands */
+	ice_aqc_opc_fw_logs_config			= 0xFF30,
+	ice_aqc_opc_fw_logs_register			= 0xFF31,
+	ice_aqc_opc_fw_logs_query			= 0xFF32,
+	ice_aqc_opc_fw_logs_event			= 0xFF33,
 };
 
 #endif /* _ICE_ADMINQ_CMD_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 8d97434e1413..08a1f699a34f 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -934,216 +934,6 @@ static void ice_cleanup_fltr_mgmt_struct(struct ice_hw *hw)
 }
 
 /**
- * ice_get_fw_log_cfg - get FW logging configuration
- * @hw: pointer to the HW struct
- */
-static int ice_get_fw_log_cfg(struct ice_hw *hw)
-{
-	struct ice_aq_desc desc;
-	__le16 *config;
-	int status;
-	u16 size;
-
-	size = sizeof(*config) * ICE_AQC_FW_LOG_ID_MAX;
-	config = kzalloc(size, GFP_KERNEL);
-	if (!config)
-		return -ENOMEM;
-
-	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging_info);
-
-	status = ice_aq_send_cmd(hw, &desc, config, size, NULL);
-	if (!status) {
-		u16 i;
-
-		/* Save FW logging information into the HW structure */
-		for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) {
-			u16 v, m, flgs;
-
-			v = le16_to_cpu(config[i]);
-			m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S;
-			flgs = (v & ICE_AQC_FW_LOG_EN_M) >> ICE_AQC_FW_LOG_EN_S;
-
-			if (m < ICE_AQC_FW_LOG_ID_MAX)
-				hw->fw_log.evnts[m].cur = flgs;
-		}
-	}
-
-	kfree(config);
-
-	return status;
-}
-
-/**
- * ice_cfg_fw_log - configure FW logging
- * @hw: pointer to the HW struct
- * @enable: enable certain FW logging events if true, disable all if false
- *
- * This function enables/disables the FW logging via Rx CQ events and a UART
- * port based on predetermined configurations. FW logging via the Rx CQ can be
- * enabled/disabled for individual PF's. However, FW logging via the UART can
- * only be enabled/disabled for all PFs on the same device.
- *
- * To enable overall FW logging, the "cq_en" and "uart_en" enable bits in
- * hw->fw_log need to be set accordingly, e.g. based on user-provided input,
- * before initializing the device.
- *
- * When re/configuring FW logging, callers need to update the "cfg" elements of
- * the hw->fw_log.evnts array with the desired logging event configurations for
- * modules of interest. When disabling FW logging completely, the callers can
- * just pass false in the "enable" parameter. On completion, the function will
- * update the "cur" element of the hw->fw_log.evnts array with the resulting
- * logging event configurations of the modules that are being re/configured. FW
- * logging modules that are not part of a reconfiguration operation retain their
- * previous states.
- *
- * Before resetting the device, it is recommended that the driver disables FW
- * logging before shutting down the control queue. When disabling FW logging
- * ("enable" = false), the latest configurations of FW logging events stored in
- * hw->fw_log.evnts[] are not overridden to allow them to be reconfigured after
- * a device reset.
- *
- * When enabling FW logging to emit log messages via the Rx CQ during the
- * device's initialization phase, a mechanism alternative to interrupt handlers
- * needs to be used to extract FW log messages from the Rx CQ periodically and
- * to prevent the Rx CQ from being full and stalling other types of control
- * messages from FW to SW. Interrupts are typically disabled during the device's
- * initialization phase.
- */
-static int ice_cfg_fw_log(struct ice_hw *hw, bool enable)
-{
-	struct ice_aqc_fw_logging *cmd;
-	u16 i, chgs = 0, len = 0;
-	struct ice_aq_desc desc;
-	__le16 *data = NULL;
-	u8 actv_evnts = 0;
-	void *buf = NULL;
-	int status = 0;
-
-	if (!hw->fw_log.cq_en && !hw->fw_log.uart_en)
-		return 0;
-
-	/* Disable FW logging only when the control queue is still responsive */
-	if (!enable &&
-	    (!hw->fw_log.actv_evnts || !ice_check_sq_alive(hw, &hw->adminq)))
-		return 0;
-
-	/* Get current FW log settings */
-	status = ice_get_fw_log_cfg(hw);
-	if (status)
-		return status;
-
-	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging);
-	cmd = &desc.params.fw_logging;
-
-	/* Indicate which controls are valid */
-	if (hw->fw_log.cq_en)
-		cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_AQ_VALID;
-
-	if (hw->fw_log.uart_en)
-		cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_UART_VALID;
-
-	if (enable) {
-		/* Fill in an array of entries with FW logging modules and
-		 * logging events being reconfigured.
-		 */
-		for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) {
-			u16 val;
-
-			/* Keep track of enabled event types */
-			actv_evnts |= hw->fw_log.evnts[i].cfg;
-
-			if (hw->fw_log.evnts[i].cfg == hw->fw_log.evnts[i].cur)
-				continue;
-
-			if (!data) {
-				data = devm_kcalloc(ice_hw_to_dev(hw),
-						    ICE_AQC_FW_LOG_ID_MAX,
-						    sizeof(*data),
-						    GFP_KERNEL);
-				if (!data)
-					return -ENOMEM;
-			}
-
-			val = i << ICE_AQC_FW_LOG_ID_S;
-			val |= hw->fw_log.evnts[i].cfg << ICE_AQC_FW_LOG_EN_S;
-			data[chgs++] = cpu_to_le16(val);
-		}
-
-		/* Only enable FW logging if at least one module is specified.
-		 * If FW logging is currently enabled but all modules are not
-		 * enabled to emit log messages, disable FW logging altogether.
-		 */
-		if (actv_evnts) {
-			/* Leave if there is effectively no change */
-			if (!chgs)
-				goto out;
-
-			if (hw->fw_log.cq_en)
-				cmd->log_ctrl |= ICE_AQC_FW_LOG_AQ_EN;
-
-			if (hw->fw_log.uart_en)
-				cmd->log_ctrl |= ICE_AQC_FW_LOG_UART_EN;
-
-			buf = data;
-			len = sizeof(*data) * chgs;
-			desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
-		}
-	}
-
-	status = ice_aq_send_cmd(hw, &desc, buf, len, NULL);
-	if (!status) {
-		/* Update the current configuration to reflect events enabled.
-		 * hw->fw_log.cq_en and hw->fw_log.uart_en indicate if the FW
-		 * logging mode is enabled for the device. They do not reflect
-		 * actual modules being enabled to emit log messages. So, their
-		 * values remain unchanged even when all modules are disabled.
-		 */
-		u16 cnt = enable ? chgs : (u16)ICE_AQC_FW_LOG_ID_MAX;
-
-		hw->fw_log.actv_evnts = actv_evnts;
-		for (i = 0; i < cnt; i++) {
-			u16 v, m;
-
-			if (!enable) {
-				/* When disabling all FW logging events as part
-				 * of device's de-initialization, the original
-				 * configurations are retained, and can be used
-				 * to reconfigure FW logging later if the device
-				 * is re-initialized.
-				 */
-				hw->fw_log.evnts[i].cur = 0;
-				continue;
-			}
-
-			v = le16_to_cpu(data[i]);
-			m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S;
-			hw->fw_log.evnts[m].cur = hw->fw_log.evnts[m].cfg;
-		}
-	}
-
-out:
-	devm_kfree(ice_hw_to_dev(hw), data);
-
-	return status;
-}
-
-/**
- * ice_output_fw_log
- * @hw: pointer to the HW struct
- * @desc: pointer to the AQ message descriptor
- * @buf: pointer to the buffer accompanying the AQ message
- *
- * Formats a FW Log message and outputs it via the standard driver logs.
- */
-void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf)
-{
-	ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg Start ]\n");
-	ice_debug_array(hw, ICE_DBG_FW_LOG, 16, 1, (u8 *)buf,
-			le16_to_cpu(desc->datalen));
-	ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg End ]\n");
-}
-
-/**
  * ice_get_itr_intrl_gran
  * @hw: pointer to the HW struct
  *
@@ -1200,10 +990,10 @@ int ice_init_hw(struct ice_hw *hw)
 	if (status)
 		goto err_unroll_cqinit;
 
-	/* Enable FW logging. Not fatal if this fails. */
-	status = ice_cfg_fw_log(hw, true);
+	status = ice_fwlog_init(hw);
 	if (status)
-		ice_debug(hw, ICE_DBG_INIT, "Failed to enable FW logging.\n");
+		ice_debug(hw, ICE_DBG_FW_LOG, "Error initializing FW logging: %d\n",
+			  status);
 
 	status = ice_clear_pf_cfg(hw);
 	if (status)
@@ -1354,8 +1144,7 @@ void ice_deinit_hw(struct ice_hw *hw)
 	ice_free_hw_tbls(hw);
 	mutex_destroy(&hw->tnl_lock);
 
-	/* Attempt to disable FW logging before shutting down control queues */
-	ice_cfg_fw_log(hw, false);
+	ice_fwlog_deinit(hw);
 	ice_destroy_all_ctrlq(hw);
 
 	/* Clear VSI contexts if not already cleared */
diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h
index 77b4c68cf696..3e933f75e948 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.h
+++ b/drivers/net/ethernet/intel/ice/ice_common.h
@@ -200,7 +200,6 @@ ice_aq_cfg_lan_txq(struct ice_hw *hw, struct ice_aqc_cfg_txqs_buf *buf,
 		   struct ice_sq_cd *cd);
 int ice_replay_vsi(struct ice_hw *hw, u16 vsi_handle);
 void ice_replay_post(struct ice_hw *hw);
-void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf);
 struct ice_q_ctx *
 ice_get_lan_q_ctx(struct ice_hw *hw, u16 vsi_handle, u8 tc, u16 q_handle);
 int ice_sbq_rw_reg(struct ice_hw *hw, struct ice_sbq_msg_input *in);
diff --git a/drivers/net/ethernet/intel/ice/ice_debugfs.c b/drivers/net/ethernet/intel/ice/ice_debugfs.c
new file mode 100644
index 000000000000..c2bfba6b9ead
--- /dev/null
+++ b/drivers/net/ethernet/intel/ice/ice_debugfs.c
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2022, Intel Corporation. */
+
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/random.h>
+#include <linux/vmalloc.h>
+#include "ice.h"
+
+static struct dentry *ice_debugfs_root;
+
+/* create a define that has an extra module that doesn't really exist. this
+ * is so we can add a module 'all' to easily enable/disable all the modules
+ */
+#define ICE_NR_FW_LOG_MODULES (ICE_AQC_FW_LOG_ID_MAX + 1)
+
+/* the ordering in this array is important. it matches the ordering of the
+ * values in the FW so the index is the same value as in ice_aqc_fw_logging_mod
+ */
+static const char * const ice_fwlog_module_string[] = {
+	"general",
+	"ctrl",
+	"link",
+	"link_topo",
+	"dnl",
+	"i2c",
+	"sdp",
+	"mdio",
+	"adminq",
+	"hdma",
+	"lldp",
+	"dcbx",
+	"dcb",
+	"xlr",
+	"nvm",
+	"auth",
+	"vpd",
+	"iosf",
+	"parser",
+	"sw",
+	"scheduler",
+	"txq",
+	"rsvd",
+	"post",
+	"watchdog",
+	"task_dispatch",
+	"mng",
+	"synce",
+	"health",
+	"tsdrv",
+	"pfreg",
+	"mdlver",
+	"all",
+};
+
+/* the ordering in this array is important. it matches the ordering of the
+ * values in the FW so the index is the same value as in ice_fwlog_level
+ */
+static const char * const ice_fwlog_level_string[] = {
+	"none",
+	"error",
+	"warning",
+	"normal",
+	"verbose",
+};
+
+/* the order in this array is important. it matches the ordering of the
+ * values in the FW so the index is the same value as in ice_fwlog_level
+ */
+static const char * const ice_fwlog_log_size[] = {
+	"128K",
+	"256K",
+	"512K",
+	"1M",
+	"2M",
+};
+
+/**
+ * ice_fwlog_print_module_cfg - print current FW logging module configuration
+ * @hw: pointer to the HW structure
+ * @module: module to print
+ * @s: the seq file to put data into
+ */
+static void
+ice_fwlog_print_module_cfg(struct ice_hw *hw, int module, struct seq_file *s)
+{
+	struct ice_fwlog_cfg *cfg = &hw->fwlog_cfg;
+	struct ice_fwlog_module_entry *entry;
+
+	if (module != ICE_AQC_FW_LOG_ID_MAX) {
+		entry =	&cfg->module_entries[module];
+
+		seq_printf(s, "\tModule: %s, Log Level: %s\n",
+			   ice_fwlog_module_string[entry->module_id],
+			   ice_fwlog_level_string[entry->log_level]);
+	} else {
+		int i;
+
+		for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) {
+			entry =	&cfg->module_entries[i];
+
+			seq_printf(s, "\tModule: %s, Log Level: %s\n",
+				   ice_fwlog_module_string[entry->module_id],
+				   ice_fwlog_level_string[entry->log_level]);
+		}
+	}
+}
+
+static int ice_find_module_by_dentry(struct ice_pf *pf, struct dentry *d)
+{
+	int i, module;
+
+	module = -1;
+	/* find the module based on the dentry */
+	for (i = 0; i < ICE_NR_FW_LOG_MODULES; i++) {
+		if (d == pf->ice_debugfs_pf_fwlog_modules[i]) {
+			module = i;
+			break;
+		}
+	}
+
+	return module;
+}
+
+/**
+ * ice_debugfs_module_show - read from 'module' file
+ * @s: the opened file
+ * @v: pointer to the offset
+ */
+static int ice_debugfs_module_show(struct seq_file *s, void *v)
+{
+	const struct file *filp = s->file;
+	struct dentry *dentry;
+	struct ice_pf *pf;
+	int module;
+
+	dentry = file_dentry(filp);
+	pf = s->private;
+
+	module = ice_find_module_by_dentry(pf, dentry);
+	if (module < 0) {
+		dev_info(ice_pf_to_dev(pf), "unknown module\n");
+		return -EINVAL;
+	}
+
+	ice_fwlog_print_module_cfg(&pf->hw, module, s);
+
+	return 0;
+}
+
+static int ice_debugfs_module_open(struct inode *inode, struct file *filp)
+{
+	return single_open(filp, ice_debugfs_module_show, inode->i_private);
+}
+
+/**
+ * ice_debugfs_module_write - write into 'module' file
+ * @filp: the opened file
+ * @buf: where to find the user's data
+ * @count: the length of the user's data
+ * @ppos: file position offset
+ */
+static ssize_t
+ice_debugfs_module_write(struct file *filp, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	struct ice_pf *pf = file_inode(filp)->i_private;
+	struct dentry *dentry = file_dentry(filp);
+	struct device *dev = ice_pf_to_dev(pf);
+	char user_val[16], *cmd_buf;
+	int module, log_level, cnt;
+
+	/* don't allow partial writes or invalid input */
+	if (*ppos != 0 || count > 8)
+		return -EINVAL;
+
+	cmd_buf = memdup_user(buf, count);
+	if (IS_ERR(cmd_buf))
+		return PTR_ERR(cmd_buf);
+
+	module = ice_find_module_by_dentry(pf, dentry);
+	if (module < 0) {
+		dev_info(dev, "unknown module\n");
+		return -EINVAL;
+	}
+
+	cnt = sscanf(cmd_buf, "%s", user_val);
+	if (cnt != 1)
+		return -EINVAL;
+
+	log_level = sysfs_match_string(ice_fwlog_level_string, user_val);
+	if (log_level < 0) {
+		dev_info(dev, "unknown log level '%s'\n", user_val);
+		return -EINVAL;
+	}
+
+	if (module != ICE_AQC_FW_LOG_ID_MAX) {
+		ice_pf_fwlog_update_module(pf, log_level, module);
+	} else {
+		/* the module 'all' is a shortcut so that we can set
+		 * all of the modules to the same level quickly
+		 */
+		int i;
+
+		for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++)
+			ice_pf_fwlog_update_module(pf, log_level, i);
+	}
+
+	return count;
+}
+
+static const struct file_operations ice_debugfs_module_fops = {
+	.owner = THIS_MODULE,
+	.open  = ice_debugfs_module_open,
+	.read = seq_read,
+	.release = single_release,
+	.write = ice_debugfs_module_write,
+};
+
+/**
+ * ice_debugfs_nr_messages_read - read from 'nr_messages' file
+ * @filp: the opened file
+ * @buffer: where to write the data for the user to read
+ * @count: the size of the user's buffer
+ * @ppos: file position offset
+ */
+static ssize_t ice_debugfs_nr_messages_read(struct file *filp,
+					    char __user *buffer, size_t count,
+					    loff_t *ppos)
+{
+	struct ice_pf *pf = filp->private_data;
+	struct ice_hw *hw = &pf->hw;
+	char buff[32] = {};
+
+	snprintf(buff, sizeof(buff), "%d\n",
+		 hw->fwlog_cfg.log_resolution);
+
+	return simple_read_from_buffer(buffer, count, ppos, buff, strlen(buff));
+}
+
+/**
+ * ice_debugfs_nr_messages_write - write into 'nr_messages' file
+ * @filp: the opened file
+ * @buf: where to find the user's data
+ * @count: the length of the user's data
+ * @ppos: file position offset
+ */
+static ssize_t
+ice_debugfs_nr_messages_write(struct file *filp, const char __user *buf,
+			      size_t count, loff_t *ppos)
+{
+	struct ice_pf *pf = filp->private_data;
+	struct device *dev = ice_pf_to_dev(pf);
+	struct ice_hw *hw = &pf->hw;
+	char user_val[8], *cmd_buf;
+	s16 nr_messages;
+	ssize_t ret;
+
+	/* don't allow partial writes or invalid input */
+	if (*ppos != 0 || count > 4)
+		return -EINVAL;
+
+	cmd_buf = memdup_user(buf, count);
+	if (IS_ERR(cmd_buf))
+		return PTR_ERR(cmd_buf);
+
+	ret = sscanf(cmd_buf, "%s", user_val);
+	if (ret != 1)
+		return -EINVAL;
+
+	ret = kstrtos16(user_val, 0, &nr_messages);
+	if (ret)
+		return ret;
+
+	if (nr_messages < ICE_AQC_FW_LOG_MIN_RESOLUTION ||
+	    nr_messages > ICE_AQC_FW_LOG_MAX_RESOLUTION) {
+		dev_err(dev, "Invalid FW log number of messages %d, value must be between %d - %d\n",
+			nr_messages, ICE_AQC_FW_LOG_MIN_RESOLUTION,
+			ICE_AQC_FW_LOG_MAX_RESOLUTION);
+		return -EINVAL;
+	}
+
+	hw->fwlog_cfg.log_resolution = nr_messages;
+
+	return count;
+}
+
+static const struct file_operations ice_debugfs_nr_messages_fops = {
+	.owner = THIS_MODULE,
+	.open  = simple_open,
+	.read = ice_debugfs_nr_messages_read,
+	.write = ice_debugfs_nr_messages_write,
+};
+
+/**
+ * ice_debugfs_enable_read - read from 'enable' file
+ * @filp: the opened file
+ * @buffer: where to write the data for the user to read
+ * @count: the size of the user's buffer
+ * @ppos: file position offset
+ */
+static ssize_t ice_debugfs_enable_read(struct file *filp,
+				       char __user *buffer, size_t count,
+				       loff_t *ppos)
+{
+	struct ice_pf *pf = filp->private_data;
+	struct ice_hw *hw = &pf->hw;
+	char buff[32] = {};
+
+	snprintf(buff, sizeof(buff), "%u\n",
+		 (u16)(hw->fwlog_cfg.options &
+		 ICE_FWLOG_OPTION_IS_REGISTERED) >> 3);
+
+	return simple_read_from_buffer(buffer, count, ppos, buff, strlen(buff));
+}
+
+/**
+ * ice_debugfs_enable_write - write into 'enable' file
+ * @filp: the opened file
+ * @buf: where to find the user's data
+ * @count: the length of the user's data
+ * @ppos: file position offset
+ */
+static ssize_t
+ice_debugfs_enable_write(struct file *filp, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	struct ice_pf *pf = filp->private_data;
+	struct ice_hw *hw = &pf->hw;
+	char user_val[8], *cmd_buf;
+	bool enable;
+	ssize_t ret;
+
+	/* don't allow partial writes or invalid input */
+	if (*ppos != 0 || count > 2)
+		return -EINVAL;
+
+	cmd_buf = memdup_user(buf, count);
+	if (IS_ERR(cmd_buf))
+		return PTR_ERR(cmd_buf);
+
+	ret = sscanf(cmd_buf, "%s", user_val);
+	if (ret != 1)
+		return -EINVAL;
+
+	ret = kstrtobool(user_val, &enable);
+	if (ret)
+		goto enable_write_error;
+
+	if (enable)
+		hw->fwlog_cfg.options |= ICE_FWLOG_OPTION_ARQ_ENA;
+	else
+		hw->fwlog_cfg.options &= ~ICE_FWLOG_OPTION_ARQ_ENA;
+
+	ret = ice_fwlog_set(hw, &hw->fwlog_cfg);
+	if (ret)
+		goto enable_write_error;
+
+	if (enable)
+		ret = ice_fwlog_register(hw);
+	else
+		ret = ice_fwlog_unregister(hw);
+
+	if (ret)
+		goto enable_write_error;
+
+	/* if we get here, nothing went wrong; return count since we didn't
+	 * really write anything
+	 */
+	ret = (ssize_t)count;
+
+enable_write_error:
+	/* This function always consumes all of the written input, or produces
+	 * an error. Check and enforce this. Otherwise, the write operation
+	 * won't complete properly.
+	 */
+	if (WARN_ON(ret != (ssize_t)count && ret >= 0))
+		ret = -EIO;
+
+	return ret;
+}
+
+static const struct file_operations ice_debugfs_enable_fops = {
+	.owner = THIS_MODULE,
+	.open  = simple_open,
+	.read = ice_debugfs_enable_read,
+	.write = ice_debugfs_enable_write,
+};
+
+/**
+ * ice_debugfs_log_size_read - read from 'log_size' file
+ * @filp: the opened file
+ * @buffer: where to write the data for the user to read
+ * @count: the size of the user's buffer
+ * @ppos: file position offset
+ */
+static ssize_t ice_debugfs_log_size_read(struct file *filp,
+					 char __user *buffer, size_t count,
+					 loff_t *ppos)
+{
+	struct ice_pf *pf = filp->private_data;
+	struct ice_hw *hw = &pf->hw;
+	char buff[32] = {};
+	int index;
+
+	index = hw->fwlog_ring.index;
+	snprintf(buff, sizeof(buff), "%s\n", ice_fwlog_log_size[index]);
+
+	return simple_read_from_buffer(buffer, count, ppos, buff, strlen(buff));
+}
+
+/**
+ * ice_debugfs_log_size_write - write into 'log_size' file
+ * @filp: the opened file
+ * @buf: where to find the user's data
+ * @count: the length of the user's data
+ * @ppos: file position offset
+ */
+static ssize_t
+ice_debugfs_log_size_write(struct file *filp, const char __user *buf,
+			   size_t count, loff_t *ppos)
+{
+	struct ice_pf *pf = filp->private_data;
+	struct device *dev = ice_pf_to_dev(pf);
+	struct ice_hw *hw = &pf->hw;
+	char user_val[8], *cmd_buf;
+	ssize_t ret;
+	int index;
+
+	/* don't allow partial writes or invalid input */
+	if (*ppos != 0 || count > 5)
+		return -EINVAL;
+
+	cmd_buf = memdup_user(buf, count);
+	if (IS_ERR(cmd_buf))
+		return PTR_ERR(cmd_buf);
+
+	ret = sscanf(cmd_buf, "%s", user_val);
+	if (ret != 1)
+		return -EINVAL;
+
+	index = sysfs_match_string(ice_fwlog_log_size, user_val);
+	if (index < 0) {
+		dev_info(dev, "Invalid log size '%s'. The value must be one of 128K, 256K, 512K, 1M, 2M\n",
+			 user_val);
+		ret = -EINVAL;
+		goto log_size_write_error;
+	} else if (hw->fwlog_cfg.options & ICE_FWLOG_OPTION_IS_REGISTERED) {
+		dev_info(dev, "FW logging is currently running. Please disable FW logging to change log_size\n");
+		ret = -EINVAL;
+		goto log_size_write_error;
+	}
+
+	/* free all the buffers and the tracking info and resize */
+	ice_fwlog_realloc_rings(hw, index);
+
+	/* if we get here, nothing went wrong; return count since we didn't
+	 * really write anything
+	 */
+	ret = (ssize_t)count;
+
+log_size_write_error:
+	/* This function always consumes all of the written input, or produces
+	 * an error. Check and enforce this. Otherwise, the write operation
+	 * won't complete properly.
+	 */
+	if (WARN_ON(ret != (ssize_t)count && ret >= 0))
+		ret = -EIO;
+
+	return ret;
+}
+
+static const struct file_operations ice_debugfs_log_size_fops = {
+	.owner = THIS_MODULE,
+	.open  = simple_open,
+	.read = ice_debugfs_log_size_read,
+	.write = ice_debugfs_log_size_write,
+};
+
+/**
+ * ice_debugfs_data_read - read from 'data' file
+ * @filp: the opened file
+ * @buffer: where to write the data for the user to read
+ * @count: the size of the user's buffer
+ * @ppos: file position offset
+ */
+static ssize_t ice_debugfs_data_read(struct file *filp, char __user *buffer,
+				     size_t count, loff_t *ppos)
+{
+	struct ice_pf *pf = filp->private_data;
+	struct ice_hw *hw = &pf->hw;
+	int data_copied = 0;
+	bool done = false;
+
+	if (ice_fwlog_ring_empty(&hw->fwlog_ring))
+		return 0;
+
+	while (!ice_fwlog_ring_empty(&hw->fwlog_ring) && !done) {
+		struct ice_fwlog_data *log;
+		u16 cur_buf_len;
+
+		log = &hw->fwlog_ring.rings[hw->fwlog_ring.head];
+		cur_buf_len = log->data_size;
+		if (cur_buf_len >= count) {
+			done = true;
+			continue;
+		}
+
+		if (copy_to_user(buffer, log->data, cur_buf_len)) {
+			/* if there is an error then bail and return whatever
+			 * the driver has copied so far
+			 */
+			done = true;
+			continue;
+		}
+
+		data_copied += cur_buf_len;
+		buffer += cur_buf_len;
+		count -= cur_buf_len;
+		*ppos += cur_buf_len;
+		ice_fwlog_ring_increment(&hw->fwlog_ring.head,
+					 hw->fwlog_ring.size);
+	}
+
+	return data_copied;
+}
+
+/**
+ * ice_debugfs_data_write - write into 'data' file
+ * @filp: the opened file
+ * @buf: where to find the user's data
+ * @count: the length of the user's data
+ * @ppos: file position offset
+ */
+static ssize_t
+ice_debugfs_data_write(struct file *filp, const char __user *buf, size_t count,
+		       loff_t *ppos)
+{
+	struct ice_pf *pf = filp->private_data;
+	struct device *dev = ice_pf_to_dev(pf);
+	struct ice_hw *hw = &pf->hw;
+	ssize_t ret;
+
+	/* don't allow partial writes */
+	if (*ppos != 0)
+		return 0;
+
+	/* any value is allowed to clear the buffer so no need to even look at
+	 * what the value is
+	 */
+	if (!(hw->fwlog_cfg.options & ICE_FWLOG_OPTION_IS_REGISTERED)) {
+		hw->fwlog_ring.head = 0;
+		hw->fwlog_ring.tail = 0;
+	} else {
+		dev_info(dev, "Can't clear FW log data while FW log running\n");
+		ret = -EINVAL;
+		goto nr_buffs_write_error;
+	}
+
+	/* if we get here, nothing went wrong; return count since we didn't
+	 * really write anything
+	 */
+	ret = (ssize_t)count;
+
+nr_buffs_write_error:
+	/* This function always consumes all of the written input, or produces
+	 * an error. Check and enforce this. Otherwise, the write operation
+	 * won't complete properly.
+	 */
+	if (WARN_ON(ret != (ssize_t)count && ret >= 0))
+		ret = -EIO;
+
+	return ret;
+}
+
+static const struct file_operations ice_debugfs_data_fops = {
+	.owner = THIS_MODULE,
+	.open  = simple_open,
+	.read = ice_debugfs_data_read,
+	.write = ice_debugfs_data_write,
+};
+
+/**
+ * ice_debugfs_fwlog_init - setup the debugfs directory
+ * @pf: the ice that is starting up
+ */
+void ice_debugfs_fwlog_init(struct ice_pf *pf)
+{
+	const char *name = pci_name(pf->pdev);
+	struct dentry *fw_modules_dir;
+	struct dentry **fw_modules;
+	int i;
+
+	/* only support fw log commands on PF 0 */
+	if (pf->hw.bus.func)
+		return;
+
+	/* allocate space for this first because if it fails then we don't
+	 * need to unwind
+	 */
+	fw_modules = kcalloc(ICE_NR_FW_LOG_MODULES, sizeof(*fw_modules),
+			     GFP_KERNEL);
+	if (!fw_modules)
+		return;
+
+	pf->ice_debugfs_pf = debugfs_create_dir(name, ice_debugfs_root);
+	if (IS_ERR(pf->ice_debugfs_pf))
+		goto err_create_module_files;
+
+	pf->ice_debugfs_pf_fwlog = debugfs_create_dir("fwlog",
+						      pf->ice_debugfs_pf);
+	if (IS_ERR(pf->ice_debugfs_pf))
+		goto err_create_module_files;
+
+	fw_modules_dir = debugfs_create_dir("modules",
+					    pf->ice_debugfs_pf_fwlog);
+	if (IS_ERR(fw_modules_dir))
+		goto err_create_module_files;
+
+	for (i = 0; i < ICE_NR_FW_LOG_MODULES; i++) {
+		fw_modules[i] = debugfs_create_file(ice_fwlog_module_string[i],
+						    0600, fw_modules_dir, pf,
+						    &ice_debugfs_module_fops);
+		if (IS_ERR(fw_modules[i]))
+			goto err_create_module_files;
+	}
+
+	debugfs_create_file("nr_messages", 0600,
+			    pf->ice_debugfs_pf_fwlog, pf,
+			    &ice_debugfs_nr_messages_fops);
+
+	pf->ice_debugfs_pf_fwlog_modules = fw_modules;
+
+	debugfs_create_file("enable", 0600, pf->ice_debugfs_pf_fwlog,
+			    pf, &ice_debugfs_enable_fops);
+
+	debugfs_create_file("log_size", 0600, pf->ice_debugfs_pf_fwlog,
+			    pf, &ice_debugfs_log_size_fops);
+
+	debugfs_create_file("data", 0600, pf->ice_debugfs_pf_fwlog,
+			    pf, &ice_debugfs_data_fops);
+
+	return;
+
+err_create_module_files:
+	debugfs_remove_recursive(pf->ice_debugfs_pf_fwlog);
+	kfree(fw_modules);
+}
+
+/**
+ * ice_debugfs_init - create root directory for debugfs entries
+ */
+void ice_debugfs_init(void)
+{
+	ice_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	if (IS_ERR(ice_debugfs_root))
+		pr_info("init of debugfs failed\n");
+}
+
+/**
+ * ice_debugfs_exit - remove debugfs entries
+ */
+void ice_debugfs_exit(void)
+{
+	debugfs_remove_recursive(ice_debugfs_root);
+	ice_debugfs_root = NULL;
+}
diff --git a/drivers/net/ethernet/intel/ice/ice_fwlog.c b/drivers/net/ethernet/intel/ice/ice_fwlog.c
new file mode 100644
index 000000000000..92b5dac481cd
--- /dev/null
+++ b/drivers/net/ethernet/intel/ice/ice_fwlog.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2022, Intel Corporation. */
+
+#include <linux/vmalloc.h>
+#include "ice.h"
+#include "ice_common.h"
+#include "ice_fwlog.h"
+
+bool ice_fwlog_ring_full(struct ice_fwlog_ring *rings)
+{
+	u16 head, tail;
+
+	head = rings->head;
+	tail = rings->tail;
+
+	if (head < tail && (tail - head == (rings->size - 1)))
+		return true;
+	else if (head > tail && (tail == (head - 1)))
+		return true;
+
+	return false;
+}
+
+bool ice_fwlog_ring_empty(struct ice_fwlog_ring *rings)
+{
+	return rings->head == rings->tail;
+}
+
+void ice_fwlog_ring_increment(u16 *item, u16 size)
+{
+	*item = (*item + 1) & (size - 1);
+}
+
+static int ice_fwlog_alloc_ring_buffs(struct ice_fwlog_ring *rings)
+{
+	int i, nr_bytes;
+	u8 *mem;
+
+	nr_bytes = rings->size * ICE_AQ_MAX_BUF_LEN;
+	mem = vzalloc(nr_bytes);
+	if (!mem)
+		return -ENOMEM;
+
+	for (i = 0; i < rings->size; i++) {
+		struct ice_fwlog_data *ring = &rings->rings[i];
+
+		ring->data_size = ICE_AQ_MAX_BUF_LEN;
+		ring->data = mem;
+		mem += ICE_AQ_MAX_BUF_LEN;
+	}
+
+	return 0;
+}
+
+static void ice_fwlog_free_ring_buffs(struct ice_fwlog_ring *rings)
+{
+	int i;
+
+	for (i = 0; i < rings->size; i++) {
+		struct ice_fwlog_data *ring = &rings->rings[i];
+
+		/* the first ring is the base memory for the whole range so
+		 * free it
+		 */
+		if (!i)
+			vfree(ring->data);
+
+		ring->data = NULL;
+		ring->data_size = 0;
+	}
+}
+
+#define ICE_FWLOG_INDEX_TO_BYTES(n) ((128 * 1024) << (n))
+/**
+ * ice_fwlog_realloc_rings - reallocate the FW log rings
+ * @hw: pointer to the HW structure
+ * @index: the new index to use to allocate memory for the log data
+ *
+ */
+void ice_fwlog_realloc_rings(struct ice_hw *hw, int index)
+{
+	struct ice_fwlog_ring ring;
+	int status, ring_size;
+
+	/* convert the number of bytes into a number of 4K buffers. externally
+	 * the driver presents the interface to the FW log data as a number of
+	 * bytes because that's easy for users to understand. internally the
+	 * driver uses a ring of buffers because the driver doesn't know where
+	 * the beginning and end of any line of log data is so the driver has
+	 * to overwrite data as complete blocks. when the data is returned to
+	 * the user the driver knows that the data is correct and the FW log
+	 * can be correctly parsed by the tools
+	 */
+	ring_size = ICE_FWLOG_INDEX_TO_BYTES(index) / ICE_AQ_MAX_BUF_LEN;
+	if (ring_size == hw->fwlog_ring.size)
+		return;
+
+	/* allocate space for the new rings and buffers then release the
+	 * old rings and buffers. that way if we don't have enough
+	 * memory then we at least have what we had before
+	 */
+	ring.rings = kcalloc(ring_size, sizeof(*ring.rings), GFP_KERNEL);
+	if (!ring.rings)
+		return;
+
+	ring.size = ring_size;
+
+	status = ice_fwlog_alloc_ring_buffs(&ring);
+	if (status) {
+		dev_warn(ice_hw_to_dev(hw), "Unable to allocate memory for FW log ring data buffers\n");
+		ice_fwlog_free_ring_buffs(&ring);
+		kfree(ring.rings);
+		return;
+	}
+
+	ice_fwlog_free_ring_buffs(&hw->fwlog_ring);
+	kfree(hw->fwlog_ring.rings);
+
+	hw->fwlog_ring.rings = ring.rings;
+	hw->fwlog_ring.size = ring.size;
+	hw->fwlog_ring.index = index;
+	hw->fwlog_ring.head = 0;
+	hw->fwlog_ring.tail = 0;
+}
+
+/**
+ * ice_fwlog_init - Initialize FW logging configuration
+ * @hw: pointer to the HW structure
+ *
+ * This function should be called on driver initialization during
+ * ice_init_hw().
+ */
+int ice_fwlog_init(struct ice_hw *hw)
+{
+	/* only support fw log commands on PF 0 */
+	if (hw->bus.func)
+		return -EINVAL;
+
+	ice_fwlog_set_supported(hw);
+
+	if (ice_fwlog_supported(hw)) {
+		int status;
+
+		/* read the current config from the FW and store it */
+		status = ice_fwlog_get(hw, &hw->fwlog_cfg);
+		if (status)
+			return status;
+
+		hw->fwlog_ring.rings = kcalloc(ICE_FWLOG_RING_SIZE_DFLT,
+					       sizeof(*hw->fwlog_ring.rings),
+					       GFP_KERNEL);
+		if (!hw->fwlog_ring.rings) {
+			dev_warn(ice_hw_to_dev(hw), "Unable to allocate memory for FW log rings\n");
+			return -ENOMEM;
+		}
+
+		hw->fwlog_ring.size = ICE_FWLOG_RING_SIZE_DFLT;
+		hw->fwlog_ring.index = ICE_FWLOG_RING_SIZE_INDEX_DFLT;
+
+		status = ice_fwlog_alloc_ring_buffs(&hw->fwlog_ring);
+		if (status) {
+			dev_warn(ice_hw_to_dev(hw), "Unable to allocate memory for FW log ring data buffers\n");
+			ice_fwlog_free_ring_buffs(&hw->fwlog_ring);
+			kfree(hw->fwlog_ring.rings);
+			return status;
+		}
+
+		ice_debugfs_fwlog_init(hw->back);
+	} else {
+		dev_warn(ice_hw_to_dev(hw), "FW logging is not supported in this NVM image. Please update the NVM to get FW log support\n");
+	}
+
+	return 0;
+}
+
+/**
+ * ice_fwlog_deinit - unroll FW logging configuration
+ * @hw: pointer to the HW structure
+ *
+ * This function should be called in ice_deinit_hw().
+ */
+void ice_fwlog_deinit(struct ice_hw *hw)
+{
+	struct ice_pf *pf = hw->back;
+	int status;
+
+	/* only support fw log commands on PF 0 */
+	if (hw->bus.func)
+		return;
+
+	/* make sure FW logging is disabled to not put the FW in a weird state
+	 * for the next driver load
+	 */
+	hw->fwlog_cfg.options &= ~ICE_FWLOG_OPTION_ARQ_ENA;
+	status = ice_fwlog_set(hw, &hw->fwlog_cfg);
+	if (status)
+		dev_warn(ice_hw_to_dev(hw), "Unable to turn off FW logging, status: %d\n",
+			 status);
+
+	kfree(pf->ice_debugfs_pf_fwlog_modules);
+
+	pf->ice_debugfs_pf_fwlog_modules = NULL;
+
+	status = ice_fwlog_unregister(hw);
+	if (status)
+		dev_warn(ice_hw_to_dev(hw), "Unable to unregister FW logging, status: %d\n",
+			 status);
+
+	if (hw->fwlog_ring.rings) {
+		ice_fwlog_free_ring_buffs(&hw->fwlog_ring);
+		kfree(hw->fwlog_ring.rings);
+	}
+}
+
+/**
+ * ice_fwlog_supported - Cached for whether FW supports FW logging or not
+ * @hw: pointer to the HW structure
+ *
+ * This will always return false if called before ice_init_hw(), so it must be
+ * called after ice_init_hw().
+ */
+bool ice_fwlog_supported(struct ice_hw *hw)
+{
+	return hw->fwlog_supported;
+}
+
+/**
+ * ice_aq_fwlog_set - Set FW logging configuration AQ command (0xFF30)
+ * @hw: pointer to the HW structure
+ * @entries: entries to configure
+ * @num_entries: number of @entries
+ * @options: options from ice_fwlog_cfg->options structure
+ * @log_resolution: logging resolution
+ */
+static int
+ice_aq_fwlog_set(struct ice_hw *hw, struct ice_fwlog_module_entry *entries,
+		 u16 num_entries, u16 options, u16 log_resolution)
+{
+	struct ice_aqc_fw_log_cfg_resp *fw_modules;
+	struct ice_aqc_fw_log *cmd;
+	struct ice_aq_desc desc;
+	int status;
+	int i;
+
+	fw_modules = kcalloc(num_entries, sizeof(*fw_modules), GFP_KERNEL);
+	if (!fw_modules)
+		return -ENOMEM;
+
+	for (i = 0; i < num_entries; i++) {
+		fw_modules[i].module_identifier =
+			cpu_to_le16(entries[i].module_id);
+		fw_modules[i].log_level = entries[i].log_level;
+	}
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logs_config);
+	desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
+
+	cmd = &desc.params.fw_log;
+
+	cmd->cmd_flags = ICE_AQC_FW_LOG_CONF_SET_VALID;
+	cmd->ops.cfg.log_resolution = cpu_to_le16(log_resolution);
+	cmd->ops.cfg.mdl_cnt = cpu_to_le16(num_entries);
+
+	if (options & ICE_FWLOG_OPTION_ARQ_ENA)
+		cmd->cmd_flags |= ICE_AQC_FW_LOG_CONF_AQ_EN;
+	if (options & ICE_FWLOG_OPTION_UART_ENA)
+		cmd->cmd_flags |= ICE_AQC_FW_LOG_CONF_UART_EN;
+
+	status = ice_aq_send_cmd(hw, &desc, fw_modules,
+				 sizeof(*fw_modules) * num_entries,
+				 NULL);
+
+	kfree(fw_modules);
+
+	return status;
+}
+
+/**
+ * ice_fwlog_set - Set the firmware logging settings
+ * @hw: pointer to the HW structure
+ * @cfg: config used to set firmware logging
+ *
+ * This function should be called whenever the driver needs to set the firmware
+ * logging configuration. It can be called on initialization, reset, or during
+ * runtime.
+ *
+ * If the PF wishes to receive FW logging then it must register via
+ * ice_fwlog_register. Note, that ice_fwlog_register does not need to be called
+ * for init.
+ */
+int ice_fwlog_set(struct ice_hw *hw, struct ice_fwlog_cfg *cfg)
+{
+	if (!ice_fwlog_supported(hw))
+		return -EOPNOTSUPP;
+
+	return ice_aq_fwlog_set(hw, cfg->module_entries,
+				ICE_AQC_FW_LOG_ID_MAX, cfg->options,
+				cfg->log_resolution);
+}
+
+/**
+ * ice_aq_fwlog_get - Get the current firmware logging configuration (0xFF32)
+ * @hw: pointer to the HW structure
+ * @cfg: firmware logging configuration to populate
+ */
+static int ice_aq_fwlog_get(struct ice_hw *hw, struct ice_fwlog_cfg *cfg)
+{
+	struct ice_aqc_fw_log_cfg_resp *fw_modules;
+	struct ice_aqc_fw_log *cmd;
+	struct ice_aq_desc desc;
+	u16 module_id_cnt;
+	int status;
+	void *buf;
+	int i;
+
+	memset(cfg, 0, sizeof(*cfg));
+
+	buf = kzalloc(ICE_AQ_MAX_BUF_LEN, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logs_query);
+	cmd = &desc.params.fw_log;
+
+	cmd->cmd_flags = ICE_AQC_FW_LOG_AQ_QUERY;
+
+	status = ice_aq_send_cmd(hw, &desc, buf, ICE_AQ_MAX_BUF_LEN, NULL);
+	if (status) {
+		ice_debug(hw, ICE_DBG_FW_LOG, "Failed to get FW log configuration\n");
+		goto status_out;
+	}
+
+	module_id_cnt = le16_to_cpu(cmd->ops.cfg.mdl_cnt);
+	if (module_id_cnt < ICE_AQC_FW_LOG_ID_MAX) {
+		ice_debug(hw, ICE_DBG_FW_LOG, "FW returned less than the expected number of FW log module IDs\n");
+	} else if (module_id_cnt > ICE_AQC_FW_LOG_ID_MAX) {
+		ice_debug(hw, ICE_DBG_FW_LOG, "FW returned more than expected number of FW log module IDs, setting module_id_cnt to software expected max %u\n",
+			  ICE_AQC_FW_LOG_ID_MAX);
+		module_id_cnt = ICE_AQC_FW_LOG_ID_MAX;
+	}
+
+	cfg->log_resolution = le16_to_cpu(cmd->ops.cfg.log_resolution);
+	if (cmd->cmd_flags & ICE_AQC_FW_LOG_CONF_AQ_EN)
+		cfg->options |= ICE_FWLOG_OPTION_ARQ_ENA;
+	if (cmd->cmd_flags & ICE_AQC_FW_LOG_CONF_UART_EN)
+		cfg->options |= ICE_FWLOG_OPTION_UART_ENA;
+	if (cmd->cmd_flags & ICE_AQC_FW_LOG_QUERY_REGISTERED)
+		cfg->options |= ICE_FWLOG_OPTION_IS_REGISTERED;
+
+	fw_modules = (struct ice_aqc_fw_log_cfg_resp *)buf;
+
+	for (i = 0; i < module_id_cnt; i++) {
+		struct ice_aqc_fw_log_cfg_resp *fw_module = &fw_modules[i];
+
+		cfg->module_entries[i].module_id =
+			le16_to_cpu(fw_module->module_identifier);
+		cfg->module_entries[i].log_level = fw_module->log_level;
+	}
+
+status_out:
+	kfree(buf);
+	return status;
+}
+
+/**
+ * ice_fwlog_get - Get the firmware logging settings
+ * @hw: pointer to the HW structure
+ * @cfg: config to populate based on current firmware logging settings
+ */
+int ice_fwlog_get(struct ice_hw *hw, struct ice_fwlog_cfg *cfg)
+{
+	if (!ice_fwlog_supported(hw))
+		return -EOPNOTSUPP;
+
+	return ice_aq_fwlog_get(hw, cfg);
+}
+
+/**
+ * ice_aq_fwlog_register - Register PF for firmware logging events (0xFF31)
+ * @hw: pointer to the HW structure
+ * @reg: true to register and false to unregister
+ */
+static int ice_aq_fwlog_register(struct ice_hw *hw, bool reg)
+{
+	struct ice_aq_desc desc;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logs_register);
+
+	if (reg)
+		desc.params.fw_log.cmd_flags = ICE_AQC_FW_LOG_AQ_REGISTER;
+
+	return ice_aq_send_cmd(hw, &desc, NULL, 0, NULL);
+}
+
+/**
+ * ice_fwlog_register - Register the PF for firmware logging
+ * @hw: pointer to the HW structure
+ *
+ * After this call the PF will start to receive firmware logging based on the
+ * configuration set in ice_fwlog_set.
+ */
+int ice_fwlog_register(struct ice_hw *hw)
+{
+	int status;
+
+	if (!ice_fwlog_supported(hw))
+		return -EOPNOTSUPP;
+
+	status = ice_aq_fwlog_register(hw, true);
+	if (status)
+		ice_debug(hw, ICE_DBG_FW_LOG, "Failed to register for firmware logging events over ARQ\n");
+	else
+		hw->fwlog_cfg.options |= ICE_FWLOG_OPTION_IS_REGISTERED;
+
+	return status;
+}
+
+/**
+ * ice_fwlog_unregister - Unregister the PF from firmware logging
+ * @hw: pointer to the HW structure
+ */
+int ice_fwlog_unregister(struct ice_hw *hw)
+{
+	int status;
+
+	if (!ice_fwlog_supported(hw))
+		return -EOPNOTSUPP;
+
+	status = ice_aq_fwlog_register(hw, false);
+	if (status)
+		ice_debug(hw, ICE_DBG_FW_LOG, "Failed to unregister from firmware logging events over ARQ\n");
+	else
+		hw->fwlog_cfg.options &= ~ICE_FWLOG_OPTION_IS_REGISTERED;
+
+	return status;
+}
+
+/**
+ * ice_fwlog_set_supported - Set if FW logging is supported by FW
+ * @hw: pointer to the HW struct
+ *
+ * If FW returns success to the ice_aq_fwlog_get call then it supports FW
+ * logging, else it doesn't. Set the fwlog_supported flag accordingly.
+ *
+ * This function is only meant to be called during driver init to determine if
+ * the FW support FW logging.
+ */
+void ice_fwlog_set_supported(struct ice_hw *hw)
+{
+	struct ice_fwlog_cfg *cfg;
+	int status;
+
+	hw->fwlog_supported = false;
+
+	cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return;
+
+	/* don't call ice_fwlog_get() because that would check to see if FW
+	 * logging is supported which is what the driver is determining now
+	 */
+	status = ice_aq_fwlog_get(hw, cfg);
+	if (status)
+		ice_debug(hw, ICE_DBG_FW_LOG, "ice_aq_fwlog_get failed, FW logging is not supported on this version of FW, status %d\n",
+			  status);
+	else
+		hw->fwlog_supported = true;
+
+	kfree(cfg);
+}
diff --git a/drivers/net/ethernet/intel/ice/ice_fwlog.h b/drivers/net/ethernet/intel/ice/ice_fwlog.h
new file mode 100644
index 000000000000..287e71fa4b86
--- /dev/null
+++ b/drivers/net/ethernet/intel/ice/ice_fwlog.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2022, Intel Corporation. */
+
+#ifndef _ICE_FWLOG_H_
+#define _ICE_FWLOG_H_
+#include "ice_adminq_cmd.h"
+
+struct ice_hw;
+
+/* Only a single log level should be set and all log levels under the set value
+ * are enabled, e.g. if log level is set to ICE_FW_LOG_LEVEL_VERBOSE, then all
+ * other log levels are included (except ICE_FW_LOG_LEVEL_NONE)
+ */
+enum ice_fwlog_level {
+	ICE_FWLOG_LEVEL_NONE = 0,
+	ICE_FWLOG_LEVEL_ERROR = 1,
+	ICE_FWLOG_LEVEL_WARNING = 2,
+	ICE_FWLOG_LEVEL_NORMAL = 3,
+	ICE_FWLOG_LEVEL_VERBOSE = 4,
+	ICE_FWLOG_LEVEL_INVALID, /* all values >= this entry are invalid */
+};
+
+struct ice_fwlog_module_entry {
+	/* module ID for the corresponding firmware logging event */
+	u16 module_id;
+	/* verbosity level for the module_id */
+	u8 log_level;
+};
+
+struct ice_fwlog_cfg {
+	/* list of modules for configuring log level */
+	struct ice_fwlog_module_entry module_entries[ICE_AQC_FW_LOG_ID_MAX];
+	/* options used to configure firmware logging */
+	u16 options;
+#define ICE_FWLOG_OPTION_ARQ_ENA		BIT(0)
+#define ICE_FWLOG_OPTION_UART_ENA		BIT(1)
+	/* set before calling ice_fwlog_init() so the PF registers for firmware
+	 * logging on initialization
+	 */
+#define ICE_FWLOG_OPTION_REGISTER_ON_INIT	BIT(2)
+	/* set in the ice_fwlog_get() response if the PF is registered for FW
+	 * logging events over ARQ
+	 */
+#define ICE_FWLOG_OPTION_IS_REGISTERED		BIT(3)
+
+	/* minimum number of log events sent per Admin Receive Queue event */
+	u16 log_resolution;
+};
+
+struct ice_fwlog_data {
+	u16 data_size;
+	u8 *data;
+};
+
+struct ice_fwlog_ring {
+	struct ice_fwlog_data *rings;
+	u16 index;
+	u16 size;
+	u16 head;
+	u16 tail;
+};
+
+#define ICE_FWLOG_RING_SIZE_INDEX_DFLT 3
+#define ICE_FWLOG_RING_SIZE_DFLT 256
+#define ICE_FWLOG_RING_SIZE_MAX 512
+
+bool ice_fwlog_ring_full(struct ice_fwlog_ring *rings);
+bool ice_fwlog_ring_empty(struct ice_fwlog_ring *rings);
+void ice_fwlog_ring_increment(u16 *item, u16 size);
+void ice_fwlog_set_supported(struct ice_hw *hw);
+bool ice_fwlog_supported(struct ice_hw *hw);
+int ice_fwlog_init(struct ice_hw *hw);
+void ice_fwlog_deinit(struct ice_hw *hw);
+int ice_fwlog_set(struct ice_hw *hw, struct ice_fwlog_cfg *cfg);
+int ice_fwlog_get(struct ice_hw *hw, struct ice_fwlog_cfg *cfg);
+int ice_fwlog_register(struct ice_hw *hw);
+int ice_fwlog_unregister(struct ice_hw *hw);
+void ice_fwlog_realloc_rings(struct ice_hw *hw, int index);
+#endif /* _ICE_FWLOG_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index d1a14bf7b65c..9b0c04d595ce 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1253,6 +1253,32 @@ ice_handle_link_event(struct ice_pf *pf, struct ice_rq_event_info *event)
 }
 
 /**
+ * ice_get_fwlog_data - copy the FW log data from ARQ event
+ * @pf: PF that the FW log event is associated with
+ * @event: event structure containing FW log data
+ */
+static void
+ice_get_fwlog_data(struct ice_pf *pf, struct ice_rq_event_info *event)
+{
+	struct ice_fwlog_data *fwlog;
+	struct ice_hw *hw = &pf->hw;
+
+	fwlog = &hw->fwlog_ring.rings[hw->fwlog_ring.tail];
+
+	memset(fwlog->data, 0, PAGE_SIZE);
+	fwlog->data_size = le16_to_cpu(event->desc.datalen);
+
+	memcpy(fwlog->data, event->msg_buf, fwlog->data_size);
+	ice_fwlog_ring_increment(&hw->fwlog_ring.tail, hw->fwlog_ring.size);
+
+	if (ice_fwlog_ring_full(&hw->fwlog_ring)) {
+		/* the rings are full so bump the head to create room */
+		ice_fwlog_ring_increment(&hw->fwlog_ring.head,
+					 hw->fwlog_ring.size);
+	}
+}
+
+/**
  * ice_aq_prep_for_event - Prepare to wait for an AdminQ event from firmware
  * @pf: pointer to the PF private structure
  * @task: intermediate helper storage and identifier for waiting
@@ -1533,8 +1559,8 @@ static int __ice_clean_ctrlq(struct ice_pf *pf, enum ice_ctl_q q_type)
 
 			ice_vc_process_vf_msg(pf, &event, &data);
 			break;
-		case ice_aqc_opc_fw_logging:
-			ice_output_fw_log(hw, &event.desc, event.msg_buf);
+		case ice_aqc_opc_fw_logs_event:
+			ice_get_fwlog_data(pf, &event);
 			break;
 		case ice_aqc_opc_lldp_set_mib_change:
 			ice_dcb_process_lldp_set_mib_change(pf, &event);
@@ -4364,6 +4390,19 @@ static void ice_print_wake_reason(struct ice_pf *pf)
 }
 
 /**
+ * ice_pf_fwlog_update_module - update 1 module
+ * @pf: pointer to the PF struct
+ * @log_level: log_level to use for the @module
+ * @module: module to update
+ */
+void ice_pf_fwlog_update_module(struct ice_pf *pf, int log_level, int module)
+{
+	struct ice_hw *hw = &pf->hw;
+
+	hw->fwlog_cfg.module_entries[module].log_level = log_level;
+}
+
+/**
  * ice_register_netdev - register netdev
  * @vsi: pointer to the VSI struct
  */
@@ -5210,6 +5249,8 @@ static void ice_remove(struct pci_dev *pdev)
 		msleep(100);
 	}
 
+	ice_debugfs_exit();
+
 	if (test_bit(ICE_FLAG_SRIOV_ENA, pf->flags)) {
 		set_bit(ICE_VF_RESETS_DISABLED, pf->state);
 		ice_free_vfs(pf);
@@ -5681,6 +5722,8 @@ static int __init ice_module_init(void)
 		goto err_dest_wq;
 	}
 
+	ice_debugfs_init();
+
 	status = pci_register_driver(&ice_driver);
 	if (status) {
 		pr_err("failed to register PCI driver, err %d\n", status);
@@ -5691,6 +5734,7 @@ static int __init ice_module_init(void)
 
 err_dest_lag_wq:
 	destroy_workqueue(ice_lag_wq);
+	ice_debugfs_exit();
 err_dest_wq:
 	destroy_workqueue(ice_wq);
 	return status;
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 8489248db0fc..6df7c4487ad0 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -17,6 +17,7 @@
 #include "ice_protocol_type.h"
 #include "ice_sbq_cmd.h"
 #include "ice_vlan_mode.h"
+#include "ice_fwlog.h"
 
 static inline bool ice_is_tc_ena(unsigned long bitmap, u8 tc)
 {
@@ -738,24 +739,6 @@ struct ice_switch_info {
 	DECLARE_BITMAP(prof_res_bm[ICE_MAX_NUM_PROFILES], ICE_MAX_FV_WORDS);
 };
 
-/* FW logging configuration */
-struct ice_fw_log_evnt {
-	u8 cfg : 4;	/* New event enables to configure */
-	u8 cur : 4;	/* Current/active event enables */
-};
-
-struct ice_fw_log_cfg {
-	u8 cq_en : 1;    /* FW logging is enabled via the control queue */
-	u8 uart_en : 1;  /* FW logging is enabled via UART for all PFs */
-	u8 actv_evnts;   /* Cumulation of currently enabled log events */
-
-#define ICE_FW_LOG_EVNT_INFO	(ICE_AQC_FW_LOG_INFO_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_INIT	(ICE_AQC_FW_LOG_INIT_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_FLOW	(ICE_AQC_FW_LOG_FLOW_EN >> ICE_AQC_FW_LOG_EN_S)
-#define ICE_FW_LOG_EVNT_ERR	(ICE_AQC_FW_LOG_ERR_EN >> ICE_AQC_FW_LOG_EN_S)
-	struct ice_fw_log_evnt evnts[ICE_AQC_FW_LOG_ID_MAX];
-};
-
 /* Enum defining the different states of the mailbox snapshot in the
  * PF-VF mailbox overflow detection algorithm. The snapshot can be in
  * states:
@@ -897,7 +880,9 @@ struct ice_hw {
 	u8 fw_patch;		/* firmware patch version */
 	u32 fw_build;		/* firmware build number */
 
-	struct ice_fw_log_cfg fw_log;
+	struct ice_fwlog_cfg fwlog_cfg;
+	bool fwlog_supported; /* does hardware support FW logging? */
+	struct ice_fwlog_ring fwlog_ring;
 
 /* Device max aggregate bandwidths corresponding to the GL_PWR_MODE_CTL
  * register. Used for determining the ITR/INTRL granularity during