diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2020-09-26 22:32:01 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-09-27 00:17:58 +0300 |
commit | 2d44b097bbb9d0af0f3b94304fee4b639ab14171 (patch) | |
tree | e2334284f3b44cb14e9364626b4b9595d7b07b99 /drivers | |
parent | 435be28b0789b3aa679a993f47d5e480f291e604 (diff) | |
download | linux-2d44b097bbb9d0af0f3b94304fee4b639ab14171.tar.xz |
net: mscc: ocelot: move NPI port configuration to DSA
Remove the ocelot_configure_cpu() function, which was in fact bringing
up 2 ports: the CPU port module, which both switchdev and DSA have, and
the NPI port, which only DSA has.
The (non-Ethernet) CPU port module is at a fixed index in the analyzer,
whereas the NPI port is selected through the "ethernet" property in the
device tree.
Therefore, the function to set up an NPI port is DSA-specific, so we
move it there, simplifying the ocelot switch library a little bit.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: UNGLinuxDriver <UNGLinuxDriver@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/dsa/ocelot/felix.c | 29 | ||||
-rw-r--r-- | drivers/net/ethernet/mscc/ocelot.c | 40 | ||||
-rw-r--r-- | drivers/net/ethernet/mscc/ocelot_vsc7514.c | 7 |
3 files changed, 35 insertions, 41 deletions
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index a56fc50f5be4..b8e192374a32 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -439,6 +439,8 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports) ocelot->vcap_is2_actions= felix->info->vcap_is2_actions; ocelot->vcap = felix->info->vcap; ocelot->ops = felix->info->ops; + ocelot->inj_prefix = OCELOT_TAG_PREFIX_NONE; + ocelot->xtr_prefix = OCELOT_TAG_PREFIX_LONG; port_phy_modes = kcalloc(num_phys_ports, sizeof(phy_interface_t), GFP_KERNEL); @@ -538,6 +540,28 @@ static int felix_init_structs(struct felix *felix, int num_phys_ports) return 0; } +/* The CPU port module is connected to the Node Processor Interface (NPI). This + * is the mode through which frames can be injected from and extracted to an + * external CPU, over Ethernet. + */ +static void felix_npi_port_init(struct ocelot *ocelot, int port) +{ + ocelot->npi = port; + + ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M | + QSYS_EXT_CPU_CFG_EXT_CPU_PORT(port), + QSYS_EXT_CPU_CFG); + + /* NPI port Injection/Extraction configuration */ + ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_XTR_HDR, + ocelot->xtr_prefix); + ocelot_fields_write(ocelot, port, SYS_PORT_MODE_INCL_INJ_HDR, + ocelot->inj_prefix); + + /* Disable transmission of pause frames */ + ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, 0); +} + /* Hardware initialization done here so that we can allocate structures with * devm without fear of dsa_register_switch returning -EPROBE_DEFER and causing * us to allocate structures twice (leak memory) and map PCI memory twice @@ -570,11 +594,8 @@ static int felix_setup(struct dsa_switch *ds) for (port = 0; port < ds->num_ports; port++) { ocelot_init_port(ocelot, port); - /* Bring up the CPU port module and configure the NPI port */ if (dsa_is_cpu_port(ds, port)) - ocelot_configure_cpu(ocelot, port, - OCELOT_TAG_PREFIX_NONE, - OCELOT_TAG_PREFIX_LONG); + felix_npi_port_init(ocelot, port); /* Set the default QoS Classification based on PCP and DEI * bits of vlan tag. diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 0445c5ee5551..b9375d96cdbc 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -1346,22 +1346,14 @@ void ocelot_init_port(struct ocelot *ocelot, int port) } EXPORT_SYMBOL(ocelot_init_port); -/* Configure and enable the CPU port module, which is a set of queues. - * If @npi contains a valid port index, the CPU port module is connected - * to the Node Processor Interface (NPI). This is the mode through which - * frames can be injected from and extracted to an external CPU, - * over Ethernet. +/* Configure and enable the CPU port module, which is a set of queues + * accessible through register MMIO, frame DMA or Ethernet (in case + * NPI mode is used). */ -void ocelot_configure_cpu(struct ocelot *ocelot, int npi, - enum ocelot_tag_prefix injection, - enum ocelot_tag_prefix extraction) +static void ocelot_cpu_port_init(struct ocelot *ocelot) { int cpu = ocelot->num_phys_ports; - ocelot->npi = npi; - ocelot->inj_prefix = injection; - ocelot->xtr_prefix = extraction; - /* The unicast destination PGID for the CPU port module is unused */ ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu); /* Instead set up a multicast destination PGID for traffic copied to @@ -1373,31 +1365,13 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi, ANA_PORT_PORT_CFG_PORTID_VAL(cpu), ANA_PORT_PORT_CFG, cpu); - if (npi >= 0 && npi < ocelot->num_phys_ports) { - ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M | - QSYS_EXT_CPU_CFG_EXT_CPU_PORT(npi), - QSYS_EXT_CPU_CFG); - - /* Enable NPI port */ - ocelot_fields_write(ocelot, npi, - QSYS_SWITCH_PORT_MODE_PORT_ENA, 1); - /* NPI port Injection/Extraction configuration */ - ocelot_fields_write(ocelot, npi, SYS_PORT_MODE_INCL_XTR_HDR, - extraction); - ocelot_fields_write(ocelot, npi, SYS_PORT_MODE_INCL_INJ_HDR, - injection); - - /* Disable transmission of pause frames */ - ocelot_fields_write(ocelot, npi, SYS_PAUSE_CFG_PAUSE_ENA, 0); - } - /* Enable CPU port module */ ocelot_fields_write(ocelot, cpu, QSYS_SWITCH_PORT_MODE_PORT_ENA, 1); /* CPU port Injection/Extraction configuration */ ocelot_fields_write(ocelot, cpu, SYS_PORT_MODE_INCL_XTR_HDR, - extraction); + ocelot->xtr_prefix); ocelot_fields_write(ocelot, cpu, SYS_PORT_MODE_INCL_INJ_HDR, - injection); + ocelot->inj_prefix); /* Configure the CPU port to be VLAN aware */ ocelot_write_gix(ocelot, ANA_PORT_VLAN_CFG_VLAN_VID(0) | @@ -1405,7 +1379,6 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi, ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1), ANA_PORT_VLAN_CFG, cpu); } -EXPORT_SYMBOL(ocelot_configure_cpu); int ocelot_init(struct ocelot *ocelot) { @@ -1445,6 +1418,7 @@ int ocelot_init(struct ocelot *ocelot) ocelot_mact_init(ocelot); ocelot_vlan_init(ocelot); ocelot_vcap_init(ocelot); + ocelot_cpu_port_init(ocelot); for (port = 0; port < ocelot->num_phys_ports; port++) { /* Clear all counters (5 groups) */ diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c index dfb1535f26f2..d7aef2fb9848 100644 --- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c +++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c @@ -930,10 +930,6 @@ static int mscc_ocelot_init_ports(struct platform_device *pdev, if (!ocelot->ports) return -ENOMEM; - /* No NPI port */ - ocelot_configure_cpu(ocelot, -1, OCELOT_TAG_PREFIX_NONE, - OCELOT_TAG_PREFIX_NONE); - for_each_available_child_of_node(ports, portnp) { struct ocelot_port_private *priv; struct ocelot_port *ocelot_port; @@ -1120,6 +1116,9 @@ static int mscc_ocelot_probe(struct platform_device *pdev) ocelot->vcap_is2_keys = vsc7514_vcap_is2_keys; ocelot->vcap_is2_actions = vsc7514_vcap_is2_actions; ocelot->vcap = vsc7514_vcap_props; + ocelot->inj_prefix = OCELOT_TAG_PREFIX_NONE; + ocelot->xtr_prefix = OCELOT_TAG_PREFIX_NONE; + ocelot->npi = -1; err = ocelot_init(ocelot); if (err) |