diff options
author | Chao Hao <chao.hao@mediatek.com> | 2020-07-03 07:41:23 +0300 |
---|---|---|
committer | Joerg Roedel <jroedel@suse.de> | 2020-07-10 17:13:11 +0300 |
commit | 37276e00da7d3a0d643d325aef81b7283fe23010 (patch) | |
tree | 4c3247f8a29d37a961b9bb289e6180ad8e369f71 /drivers | |
parent | b053bc7183c86dc52e68e9891d269992e79a5251 (diff) | |
download | linux-37276e00da7d3a0d643d325aef81b7283fe23010.tar.xz |
iommu/mediatek: Add sub_comm id in translation fault
The max larb number that a iommu HW support is 8(larb0~larb7 in the below
diagram).
If the larb's number is over 8, we use a sub_common for merging
several larbs into one larb. At this case, we will extend larb_id:
bit[11:9] means common-id;
bit[8:7] means subcommon-id;
>From these two variables, we could get the real larb number when
translation fault happen.
The diagram is as below:
EMI
|
IOMMU
|
-----------------
| |
common1 common0
| |
-----------------
|
smi common
|
------------------------------------
| | | | | |
3'd0 3'd1 3'd2 3'd3 ... 3'd7 <-common_id(max is 8)
| | | | | |
Larb0 Larb1 | Larb3 ... Larb7
|
smi sub common
|
--------------------------
| | | |
2'd0 2'd1 2'd2 2'd3 <-sub_common_id(max is 4)
| | | |
Larb8 Larb9 Larb10 Larb11
In this patch we extend larb_remap[] to larb_remap[8][4] for this.
larb_remap[x][y]: x means common-id above, y means subcommon_id above.
We can also distinguish if the M4U HW has sub_common by HAS_SUB_COMM
macro.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200703044127.27438-7-chao.hao@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/iommu/mtk_iommu.c | 21 | ||||
-rw-r--r-- | drivers/iommu/mtk_iommu.h | 5 |
2 files changed, 18 insertions, 8 deletions
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c index 533b8f76f592..0d96dcd8612b 100644 --- a/drivers/iommu/mtk_iommu.c +++ b/drivers/iommu/mtk_iommu.c @@ -91,6 +91,8 @@ #define REG_MMU1_INVLD_PA 0x148 #define REG_MMU0_INT_ID 0x150 #define REG_MMU1_INT_ID 0x154 +#define F_MMU_INT_ID_COMM_ID(a) (((a) >> 9) & 0x7) +#define F_MMU_INT_ID_SUB_COMM_ID(a) (((a) >> 7) & 0x3) #define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7) #define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f) @@ -109,6 +111,7 @@ #define HAS_VLD_PA_RNG BIT(2) #define RESET_AXI BIT(3) #define OUT_ORDER_WR_EN BIT(4) +#define HAS_SUB_COMM BIT(5) #define MTK_IOMMU_HAS_FLAG(pdata, _x) \ ((((pdata)->flags) & (_x)) == (_x)) @@ -239,7 +242,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) struct mtk_iommu_data *data = dev_id; struct mtk_iommu_domain *dom = data->m4u_dom; u32 int_state, regval, fault_iova, fault_pa; - unsigned int fault_larb, fault_port; + unsigned int fault_larb, fault_port, sub_comm = 0; bool layer, write; /* Read error info from registers */ @@ -255,10 +258,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) } layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT; write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT; - fault_larb = F_MMU_INT_ID_LARB_ID(regval); fault_port = F_MMU_INT_ID_PORT_ID(regval); - - fault_larb = data->plat_data->larbid_remap[fault_larb]; + if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) { + fault_larb = F_MMU_INT_ID_COMM_ID(regval); + sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval); + } else { + fault_larb = F_MMU_INT_ID_LARB_ID(regval); + } + fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm]; if (report_iommu_fault(&dom->domain, data->dev, fault_iova, write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) { @@ -785,21 +792,21 @@ static const struct mtk_iommu_plat_data mt2712_data = { .m4u_plat = M4U_MT2712, .flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG, .inv_sel_reg = REG_MMU_INV_SEL_GEN1, - .larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9}, + .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}}, }; static const struct mtk_iommu_plat_data mt8173_data = { .m4u_plat = M4U_MT8173, .flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI, .inv_sel_reg = REG_MMU_INV_SEL_GEN1, - .larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */ + .larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */ }; static const struct mtk_iommu_plat_data mt8183_data = { .m4u_plat = M4U_MT8183, .flags = RESET_AXI, .inv_sel_reg = REG_MMU_INV_SEL_GEN1, - .larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1}, + .larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}}, }; static const struct of_device_id mtk_iommu_of_ids[] = { diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h index cf53f5e80d22..46d0d47b22e1 100644 --- a/drivers/iommu/mtk_iommu.h +++ b/drivers/iommu/mtk_iommu.h @@ -17,6 +17,9 @@ #include <linux/spinlock.h> #include <soc/mediatek/smi.h> +#define MTK_LARB_COM_MAX 8 +#define MTK_LARB_SUBCOM_MAX 4 + struct mtk_iommu_suspend_reg { union { u32 standard_axi_mode;/* v1 */ @@ -41,7 +44,7 @@ struct mtk_iommu_plat_data { enum mtk_iommu_plat m4u_plat; u32 flags; u32 inv_sel_reg; - unsigned char larbid_remap[MTK_LARB_NR_MAX]; + unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX]; }; struct mtk_iommu_domain; |