summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJan Kundrát <jan.kundrat@cesnet.cz>2019-03-07 16:38:04 +0300
committerLinus Walleij <linus.walleij@linaro.org>2019-04-04 20:04:28 +0300
commit430c1ce304e4e190a89b065aa75d7a0ea725560b (patch)
tree255eea5eca1ec8a47206e2749584b9080bb9e1b1 /drivers
parent77bc0e69c3e264214e5234bcde5654f40fe1e7db (diff)
downloadlinux-430c1ce304e4e190a89b065aa75d7a0ea725560b.tar.xz
pinctrl: mcp23s08: debugfs: remove custom printer
The comment for this dbg_show says that it is supposed to return more than what the generic code is showing, including de-glitching. That's wrong because: - this chip does not support deglitching, - the code does not print anything extra compared to the generic handler, - its behavior is different because it skips unrequested GPIOs; the generic code prints their names if they're assigned There is an important difference, though. Previously, dbg_show would re-check some registers to see if they still match what the regmap thinks should be in there. This was semi-useful when develpoing the HW board because it immediately pointed to SPI wiring problem if a CS connection was missing (0xffs are easy to see). However, I do not think that this makes much sense -- and one could always do this in some other way if needed. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Phil Reid <preid@electromag.com.au> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/pinctrl/pinctrl-mcp23s08.c110
1 files changed, 0 insertions, 110 deletions
diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 5d7a8514def9..83dbab7c11bc 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -656,115 +656,6 @@ static int mcp23s08_irqchip_setup(struct mcp23s08 *mcp)
/*----------------------------------------------------------------------*/
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/seq_file.h>
-
-/*
- * This compares the chip's registers with the register
- * cache and corrects any incorrectly set register. This
- * can be used to fix state for MCP23xxx, that temporary
- * lost its power supply.
- */
-#define MCP23S08_CONFIG_REGS 7
-static int __check_mcp23s08_reg_cache(struct mcp23s08 *mcp)
-{
- int cached[MCP23S08_CONFIG_REGS];
- int err = 0, i;
-
- /* read cached config registers */
- for (i = 0; i < MCP23S08_CONFIG_REGS; i++) {
- err = mcp_read(mcp, i, &cached[i]);
- if (err)
- goto out;
- }
-
- regcache_cache_bypass(mcp->regmap, true);
-
- for (i = 0; i < MCP23S08_CONFIG_REGS; i++) {
- int uncached;
- err = mcp_read(mcp, i, &uncached);
- if (err)
- goto out;
-
- if (uncached != cached[i]) {
- dev_err(mcp->dev, "restoring reg 0x%02x from 0x%04x to 0x%04x (power-loss?)\n",
- i, uncached, cached[i]);
- mcp_write(mcp, i, cached[i]);
- }
- }
-
-out:
- if (err)
- dev_err(mcp->dev, "read error: reg=%02x, err=%d", i, err);
- regcache_cache_bypass(mcp->regmap, false);
- return err;
-}
-
-/*
- * This shows more info than the generic gpio dump code:
- * pullups, deglitching, open drain drive.
- */
-static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
- struct mcp23s08 *mcp;
- char bank;
- int t;
- unsigned mask;
- int iodir, gpio, gppu;
-
- mcp = gpiochip_get_data(chip);
-
- /* NOTE: we only handle one bank for now ... */
- bank = '0' + ((mcp->addr >> 1) & 0x7);
-
- mutex_lock(&mcp->lock);
-
- t = __check_mcp23s08_reg_cache(mcp);
- if (t) {
- seq_printf(s, " I/O Error\n");
- goto done;
- }
- t = mcp_read(mcp, MCP_IODIR, &iodir);
- if (t) {
- seq_printf(s, " I/O Error\n");
- goto done;
- }
- t = mcp_read(mcp, MCP_GPIO, &gpio);
- if (t) {
- seq_printf(s, " I/O Error\n");
- goto done;
- }
- t = mcp_read(mcp, MCP_GPPU, &gppu);
- if (t) {
- seq_printf(s, " I/O Error\n");
- goto done;
- }
-
- for (t = 0, mask = BIT(0); t < chip->ngpio; t++, mask <<= 1) {
- const char *label;
-
- label = gpiochip_is_requested(chip, t);
- if (!label)
- continue;
-
- seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s\n",
- chip->base + t, bank, t, label,
- (iodir & mask) ? "in " : "out",
- (gpio & mask) ? "hi" : "lo",
- (gppu & mask) ? "up" : " ");
- /* NOTE: ignoring the irq-related registers */
- }
-done:
- mutex_unlock(&mcp->lock);
-}
-
-#else
-#define mcp23s08_dbg_show NULL
-#endif
-
-/*----------------------------------------------------------------------*/
-
static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
void *data, unsigned addr, unsigned type,
unsigned int base, int cs)
@@ -785,7 +676,6 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
mcp->chip.get = mcp23s08_get;
mcp->chip.direction_output = mcp23s08_direction_output;
mcp->chip.set = mcp23s08_set;
- mcp->chip.dbg_show = mcp23s08_dbg_show;
#ifdef CONFIG_OF_GPIO
mcp->chip.of_gpio_n_cells = 2;
mcp->chip.of_node = dev->of_node;