diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-05 20:51:10 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-03-05 20:51:10 +0400 |
commit | 550cf00dbc8ee402bef71628cb71246493dd4500 (patch) | |
tree | cfcfd6cab72c620b5e567fe64f06e6d8a3c3befc /drivers | |
parent | 5d329e245f9a1edb905284730650a0c6c806fb2e (diff) | |
parent | e7747475b61fdc2a4a412475a9d64d8c309916e3 (diff) | |
download | linux-550cf00dbc8ee402bef71628cb71246493dd4500.tar.xz |
Merge tag 'mmc-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
MMC fixes from Chris Ball for 3.3:
- atmel-mci: oops fix against regression introduced in 3.2
- core: power saving regression fix against 3.3-rc1
- core: suspend/resume fix for UHS-I cards
- esdhc-imx: MMC card regression fix against 3.0
- mmci: oops fix for ARM systems with large (64k) pages
- MAINTAINERS update for atmel-mci.
* tag 'mmc-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: core: Fixup suspend/resume issues for UHS-I cards
mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size
mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5
mmc: core: fix regression: set default clock gating delay to 0
MAINTAINERS: hand over atmel-mci (sd/mmc interface)
mmc: atmel-mci: don't use dma features when using DMA with no chan available
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mmc/core/core.c | 3 | ||||
-rw-r--r-- | drivers/mmc/core/host.c | 4 | ||||
-rw-r--r-- | drivers/mmc/core/mmc.c | 3 | ||||
-rw-r--r-- | drivers/mmc/core/sd.c | 8 | ||||
-rw-r--r-- | drivers/mmc/core/sdio.c | 8 | ||||
-rw-r--r-- | drivers/mmc/host/atmel-mci.c | 21 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.c | 7 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 5 |
8 files changed, 36 insertions, 23 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 690255c7d4dc..132378b89d76 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2068,6 +2068,9 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) */ mmc_hw_reset_for_init(host); + /* Initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + /* * sdio_reset sends CMD52 to reset card. Since we do not know * if the card is being re-initialized, just send it. CMD52 diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 30055f2b0d44..c3704e293a7b 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -238,10 +238,10 @@ static inline void mmc_host_clk_init(struct mmc_host *host) /* Hold MCI clock for 8 cycles by default */ host->clk_delay = 8; /* - * Default clock gating delay is 200ms. + * Default clock gating delay is 0ms to avoid wasting power. * This value can be tuned by writing into sysfs entry. */ - host->clkgate_delay = 200; + host->clkgate_delay = 0; host->clk_gated = false; INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work); spin_lock_init(&host->clk_lock); diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index a48066344fa8..2b9ed1401dc4 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -816,6 +816,9 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (!mmc_host_is_spi(host)) mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + /* Initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + /* * Since we're changing the OCR value, we seem to * need to tell some cards to go back to the idle diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 5017f9354ce2..c272c6868ecf 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -911,6 +911,9 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, BUG_ON(!host); WARN_ON(!host->claimed); + /* The initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + err = mmc_sd_get_cid(host, ocr, cid, &rocr); if (err) return err; @@ -1156,11 +1159,6 @@ int mmc_attach_sd(struct mmc_host *host) BUG_ON(!host); WARN_ON(!host->claimed); - /* Make sure we are at 3.3V signalling voltage */ - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false); - if (err) - return err; - /* Disable preset value enable if already set since last time */ if (host->ops->enable_preset_value) { mmc_host_clk_hold(host); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 12cde6ee17f5..2c7c83f832d2 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -585,6 +585,9 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, * Inform the card of the voltage */ if (!powered_resume) { + /* The initialization should be done at 3.3 V I/O voltage. */ + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + err = mmc_send_io_op_cond(host, host->ocr, &ocr); if (err) goto err; @@ -996,6 +999,11 @@ static int mmc_sdio_power_restore(struct mmc_host *host) * With these steps taken, mmc_select_voltage() is also required to * restore the correct voltage setting of the card. */ + + /* The initialization should be done at 3.3 V I/O voltage. */ + if (!mmc_card_keep_power(host)) + mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0); + sdio_reset(host); mmc_go_idle(host); mmc_send_if_cond(host, host->ocr_avail); diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 6985cdb0bb26..e4449a54ae8f 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1948,12 +1948,12 @@ static bool atmci_filter(struct dma_chan *chan, void *slave) } } -static void atmci_configure_dma(struct atmel_mci *host) +static bool atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; if (host == NULL) - return; + return false; pdata = host->pdev->dev.platform_data; @@ -1970,12 +1970,15 @@ static void atmci_configure_dma(struct atmel_mci *host) host->dma.chan = dma_request_channel(mask, atmci_filter, pdata->dma_slave); } - if (!host->dma.chan) - dev_notice(&host->pdev->dev, "DMA not available, using PIO\n"); - else + if (!host->dma.chan) { + dev_warn(&host->pdev->dev, "no DMA channel available\n"); + return false; + } else { dev_info(&host->pdev->dev, "Using %s for DMA transfers\n", dma_chan_name(host->dma.chan)); + return true; + } } static inline unsigned int atmci_get_version(struct atmel_mci *host) @@ -2085,8 +2088,7 @@ static int __init atmci_probe(struct platform_device *pdev) /* Get MCI capabilities and set operations according to it */ atmci_get_cap(host); - if (host->caps.has_dma) { - dev_info(&pdev->dev, "using DMA\n"); + if (host->caps.has_dma && atmci_configure_dma(host)) { host->prepare_data = &atmci_prepare_data_dma; host->submit_data = &atmci_submit_data_dma; host->stop_transfer = &atmci_stop_transfer_dma; @@ -2096,15 +2098,12 @@ static int __init atmci_probe(struct platform_device *pdev) host->submit_data = &atmci_submit_data_pdc; host->stop_transfer = &atmci_stop_transfer_pdc; } else { - dev_info(&pdev->dev, "no DMA, no PDC\n"); + dev_info(&pdev->dev, "using PIO\n"); host->prepare_data = &atmci_prepare_data; host->submit_data = &atmci_submit_data; host->stop_transfer = &atmci_stop_transfer; } - if (host->caps.has_dma) - atmci_configure_dma(host); - platform_set_drvdata(pdev, host); /* We need at least one slot to succeed */ diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0d955ffaf44e..11e589cd8233 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1271,12 +1271,13 @@ static int __devinit mmci_probe(struct amba_device *dev, /* * Block size can be up to 2048 bytes, but must be a power of two. */ - mmc->max_blk_size = 2048; + mmc->max_blk_size = 1 << 11; /* - * No limit on the number of blocks transferred. + * Limit the number of blocks transferred so that we don't overflow + * the maximum request size. */ - mmc->max_blk_count = mmc->max_req_size; + mmc->max_blk_count = mmc->max_req_size >> 11; spin_lock_init(&host->lock); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index d601e41af282..0be4e2013632 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -269,8 +269,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) imx_data->scratchpad = val; return; case SDHCI_COMMAND: - if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) - && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + if ((host->cmd->opcode == MMC_STOP_TRANSMISSION || + host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) val |= SDHCI_CMD_ABORTCMD; if (is_imx6q_usdhc(imx_data)) { |