diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-08-08 05:05:39 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-08-08 05:05:39 +0400 |
commit | a06dee41a31bff488a261dfc542776ffd2f24ff1 (patch) | |
tree | 4930b7698d5d238f159c2d6628c7c1c62765b42b /drivers | |
parent | b588e2bbd7b872c9cdf635fe0f04840534e72443 (diff) | |
parent | 816d8c6a2580562698cf0fa0b9e5b4dd570e636e (diff) | |
download | linux-a06dee41a31bff488a261dfc542776ffd2f24ff1.tar.xz |
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03
hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07
hwmon: (hwmon-vid) Add 6-bit vid codes for AMD NPT 0Fh cpus
hwmon: (hwmon-vid) Trivial format multi-line comments per CodingStyle
hwmon: ad7414 driver
hwmon: (thmc50) Add support for critical temperature limits
hwmon: (adm9240) Remove EXPERIMENTAL dependency
hwmon: (w83627hf) Drop reset module parameter
hwmon: (w83627hf) Add pwm_enable sysfs interface
hwmon: (w83791d) Use fan divisor bits from vbat register
hwmon: (f71882fg) Delete needless forward declarations
hwmon: (dme1737) Add support for the SMSC SCH5027
hwmon: (dme1737) Skip detection if forced
hwmon: (dme1737) Cleanups
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/hwmon/Kconfig | 16 | ||||
-rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
-rw-r--r-- | drivers/hwmon/ad7414.c | 268 | ||||
-rw-r--r-- | drivers/hwmon/dme1737.c | 292 | ||||
-rw-r--r-- | drivers/hwmon/f71882fg.c | 6 | ||||
-rw-r--r-- | drivers/hwmon/hwmon-vid.c | 144 | ||||
-rw-r--r-- | drivers/hwmon/it87.c | 45 | ||||
-rw-r--r-- | drivers/hwmon/thmc50.c | 28 | ||||
-rw-r--r-- | drivers/hwmon/w83627hf.c | 101 | ||||
-rw-r--r-- | drivers/hwmon/w83791d.c | 24 |
10 files changed, 687 insertions, 238 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c882fd05cf29..bf4ebfb86fa5 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3 This driver can also be built as a module. If so, the module will be called abituguru3. +config SENSORS_AD7414 + tristate "Analog Devices AD7414" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + AD7414 temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called ad7414. + config SENSORS_AD7418 tristate "Analog Devices AD7416, AD7417 and AD7418" depends on I2C && EXPERIMENTAL @@ -124,7 +134,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, @@ -575,8 +585,8 @@ config SENSORS_DME1737 select HWMON_VID help If you say yes here you get support for the hardware monitoring - and fan control features of the SMSC DME1737 (and compatibles - like the Asus A8000) and SCH311x Super-I/O chips. + and fan control features of the SMSC DME1737, SCH311x, SCH5027, and + Asus A8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called dme1737. diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index d098677e08de..7943e5cefb06 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SENSORS_W83791D) += w83791d.o obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o +obj-$(CONFIG_SENSORS_AD7414) += ad7414.o obj-$(CONFIG_SENSORS_AD7418) += ad7418.o obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c new file mode 100644 index 000000000000..ce8d94fbfd7e --- /dev/null +++ b/drivers/hwmon/ad7414.c @@ -0,0 +1,268 @@ +/* + * An hwmon driver for the Analog Devices AD7414 + * + * Copyright 2006 Stefan Roese <sr at denx.de>, DENX Software Engineering + * + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan <smaclennan@pikatech.com> + * + * Copyright (c) 2008 Spansion Inc. + * Frank Edelhaeuser <frank.edelhaeuser at spansion.com> + * (converted to "new style" I2C driver model, removed checkpatch.pl warnings) + * + * Based on ad7418.c + * Copyright 2006 Tower Technologies, Alessandro Zummo <a.zummo at towertech.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> + + +/* AD7414 registers */ +#define AD7414_REG_TEMP 0x00 +#define AD7414_REG_CONF 0x01 +#define AD7414_REG_T_HIGH 0x02 +#define AD7414_REG_T_LOW 0x03 + +static u8 AD7414_REG_LIMIT[] = { AD7414_REG_T_HIGH, AD7414_REG_T_LOW }; + +struct ad7414_data { + struct device *hwmon_dev; + struct mutex lock; /* atomic read data updates */ + char valid; /* !=0 if following fields are valid */ + unsigned long next_update; /* In jiffies */ + s16 temp_input; /* Register values */ + s8 temps[ARRAY_SIZE(AD7414_REG_LIMIT)]; +}; + +/* REG: (0.25C/bit, two's complement) << 6 */ +static inline int ad7414_temp_from_reg(s16 reg) +{ + /* use integer division instead of equivalent right shift to + * guarantee arithmetic shift and preserve the sign + */ + return ((int)reg / 64) * 250; +} + +static inline int ad7414_read(struct i2c_client *client, u8 reg) +{ + if (reg == AD7414_REG_TEMP) { + int value = i2c_smbus_read_word_data(client, reg); + return (value < 0) ? value : swab16(value); + } else + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int ad7414_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +struct ad7414_data *ad7414_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ad7414_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->lock); + + if (time_after(jiffies, data->next_update) || !data->valid) { + int value, i; + + dev_dbg(&client->dev, "starting ad7414 update\n"); + + value = ad7414_read(client, AD7414_REG_TEMP); + if (value < 0) + dev_dbg(&client->dev, "AD7414_REG_TEMP err %d\n", + value); + else + data->temp_input = value; + + for (i = 0; i < ARRAY_SIZE(AD7414_REG_LIMIT); ++i) { + value = ad7414_read(client, AD7414_REG_LIMIT[i]); + if (value < 0) + dev_dbg(&client->dev, "AD7414 reg %d err %d\n", + AD7414_REG_LIMIT[i], value); + else + data->temps[i] = value; + } + + data->next_update = jiffies + HZ + HZ / 2; + data->valid = 1; + } + + mutex_unlock(&data->lock); + + return data; +} + +static ssize_t show_temp_input(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7414_data *data = ad7414_update_device(dev); + return sprintf(buf, "%d\n", ad7414_temp_from_reg(data->temp_input)); +} +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0); + +static ssize_t show_max_min(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int index = to_sensor_dev_attr(attr)->index; + struct ad7414_data *data = ad7414_update_device(dev); + return sprintf(buf, "%d\n", data->temps[index] * 1000); +} + +static ssize_t set_max_min(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ad7414_data *data = i2c_get_clientdata(client); + int index = to_sensor_dev_attr(attr)->index; + u8 reg = AD7414_REG_LIMIT[index]; + long temp = simple_strtol(buf, NULL, 10); + + temp = SENSORS_LIMIT(temp, -40000, 85000); + temp = (temp + (temp < 0 ? -500 : 500)) / 1000; + + mutex_lock(&data->lock); + data->temps[index] = temp; + ad7414_write(client, reg, temp); + mutex_unlock(&data->lock); + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_max_min, set_max_min, 0); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, + show_max_min, set_max_min, 1); + +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct ad7414_data *data = ad7414_update_device(dev); + int value = (data->temp_input >> bitnr) & 1; + return sprintf(buf, "%d\n", value); +} + +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 4); + +static struct attribute *ad7414_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7414_group = { + .attrs = ad7414_attributes, +}; + +static int ad7414_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct ad7414_data *data; + int conf; + int err = 0; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_READ_WORD_DATA)) + goto exit; + + data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "chip found\n"); + + /* Make sure the chip is powered up. */ + conf = i2c_smbus_read_byte_data(client, AD7414_REG_CONF); + if (conf < 0) + dev_warn(&client->dev, + "ad7414_probe unable to read config register.\n"); + else { + conf &= ~(1 << 7); + i2c_smbus_write_byte_data(client, AD7414_REG_CONF, conf); + } + + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &ad7414_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &ad7414_group); +exit_free: + kfree(data); +exit: + return err; +} + +static int __devexit ad7414_remove(struct i2c_client *client) +{ + struct ad7414_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ad7414_group); + kfree(data); + return 0; +} + +static const struct i2c_device_id ad7414_id[] = { + { "ad7414", 0 }, + {} +}; + +static struct i2c_driver ad7414_driver = { + .driver = { + .name = "ad7414", + }, + .probe = ad7414_probe, + .remove = __devexit_p(ad7414_remove), + .id_table = ad7414_id, +}; + +static int __init ad7414_init(void) +{ + return i2c_add_driver(&ad7414_driver); +} +module_init(ad7414_init); + +static void __exit ad7414_exit(void) +{ + i2c_del_driver(&ad7414_driver); +} +module_exit(ad7414_exit); + +MODULE_AUTHOR("Stefan Roese <sr at denx.de>, " + "Frank Edelhaeuser <frank.edelhaeuser at spansion.com>"); + +MODULE_DESCRIPTION("AD7414 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 5e2cf0aef480..cdb8311e4ef7 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -1,11 +1,11 @@ /* - * dme1737.c - Driver for the SMSC DME1737, Asus A8000, and SMSC SCH311x - * Super-I/O chips integrated hardware monitoring features. - * Copyright (c) 2007 Juerg Haefliger <juergh@gmail.com> + * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x and + * SCH5027 Super-I/O chips integrated hardware monitoring features. + * Copyright (c) 2007, 2008 Juerg Haefliger <juergh@gmail.com> * * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access - * the chip registers if a DME1737 (or A8000) is found and the ISA bus if a - * SCH311x chip is found. Both types of chips have very similar hardware + * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus + * if a SCH311x chip is found. Both types of chips have very similar hardware * monitoring capabilities but differ in the way they can be accessed. * * This program is free software; you can redistribute it and/or modify @@ -57,7 +57,10 @@ MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC " static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; /* Insmod parameters */ -I2C_CLIENT_INSMOD_1(dme1737); +I2C_CLIENT_INSMOD_2(dme1737, sch5027); + +/* ISA chip types */ +enum isa_chips { sch311x = sch5027 + 1 }; /* --------------------------------------------------------------------- * Registers @@ -163,6 +166,7 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23}; #define DME1737_VERSTEP 0x88 #define DME1737_VERSTEP_MASK 0xf8 #define SCH311X_DEVICE 0x8c +#define SCH5027_VERSTEP 0x69 /* Length of ISA address segment */ #define DME1737_EXTENT 2 @@ -182,6 +186,7 @@ struct dme1737_data { unsigned long last_update; /* in jiffies */ unsigned long last_vbat; /* in jiffies */ enum chips type; + const int *in_nominal; /* pointer to IN_NOMINAL array */ u8 vid; u8 pwm_rr_en; @@ -220,23 +225,23 @@ static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300}; static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300, 3300}; -#define IN_NOMINAL(ix, type) (((type) == dme1737) ? \ - IN_NOMINAL_DME1737[(ix)] : \ - IN_NOMINAL_SCH311x[(ix)]) +static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300, + 3300}; +#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \ + (type) == sch5027 ? IN_NOMINAL_SCH5027 : \ + IN_NOMINAL_DME1737) /* Voltage input * Voltage inputs have 16 bits resolution, limit values have 8 bits * resolution. */ -static inline int IN_FROM_REG(int reg, int ix, int res, int type) +static inline int IN_FROM_REG(int reg, int nominal, int res) { - return (reg * IN_NOMINAL(ix, type) + (3 << (res - 3))) / - (3 << (res - 2)); + return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2)); } -static inline int IN_TO_REG(int val, int ix, int type) +static inline int IN_TO_REG(int val, int nominal) { - return SENSORS_LIMIT((val * 192 + IN_NOMINAL(ix, type) / 2) / - IN_NOMINAL(ix, type), 0, 255); + return SENSORS_LIMIT((val * 192 + nominal / 2) / nominal, 0, 255); } /* Temperature input @@ -565,7 +570,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) /* Sample register contents every 1 sec */ if (time_after(jiffies, data->last_update + HZ) || !data->valid) { - data->vid = dme1737_read(client, DME1737_REG_VID) & 0x3f; + if (data->type != sch5027) { + data->vid = dme1737_read(client, DME1737_REG_VID) & + 0x3f; + } /* In (voltage) registers */ for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) { @@ -593,8 +601,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) DME1737_REG_TEMP_MIN(ix)); data->temp_max[ix] = dme1737_read(client, DME1737_REG_TEMP_MAX(ix)); - data->temp_offset[ix] = dme1737_read(client, - DME1737_REG_TEMP_OFFSET(ix)); + if (data->type != sch5027) { + data->temp_offset[ix] = dme1737_read(client, + DME1737_REG_TEMP_OFFSET(ix)); + } } /* In and temp LSB registers @@ -669,9 +679,11 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) data->zone_abs[ix] = dme1737_read(client, DME1737_REG_ZONE_ABS(ix)); } - for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { - data->zone_hyst[ix] = dme1737_read(client, + if (data->type != sch5027) { + for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { + data->zone_hyst[ix] = dme1737_read(client, DME1737_REG_ZONE_HYST(ix)); + } } /* Alarm registers */ @@ -735,13 +747,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, switch (fn) { case SYS_IN_INPUT: - res = IN_FROM_REG(data->in[ix], ix, 16, data->type); + res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16); break; case SYS_IN_MIN: - res = IN_FROM_REG(data->in_min[ix], ix, 8, data->type); + res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8); break; case SYS_IN_MAX: - res = IN_FROM_REG(data->in_max[ix], ix, 8, data->type); + res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8); break; case SYS_IN_ALARM: res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01; @@ -768,12 +780,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); switch (fn) { case SYS_IN_MIN: - data->in_min[ix] = IN_TO_REG(val, ix, data->type); + data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]); dme1737_write(client, DME1737_REG_IN_MIN(ix), data->in_min[ix]); break; case SYS_IN_MAX: - data->in_max[ix] = IN_TO_REG(val, ix, data->type); + data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]); dme1737_write(client, DME1737_REG_IN_MAX(ix), data->in_max[ix]); break; @@ -1166,7 +1178,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", res); } -static struct attribute *dme1737_attr_pwm[]; +static struct attribute *dme1737_pwm_chmod_attr[]; static void dme1737_chmod_file(struct device*, struct attribute*, mode_t); static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, @@ -1230,7 +1242,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, switch (val) { case 0: /* Change permissions of pwm[ix] to read-only */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO); /* Turn fan fully on */ data->pwm_config[ix] = PWM_EN_TO_REG(0, @@ -1245,12 +1257,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, dme1737_write(client, DME1737_REG_PWM_CONFIG(ix), data->pwm_config[ix]); /* Change permissions of pwm[ix] to read-writeable */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO | S_IWUSR); break; case 2: /* Change permissions of pwm[ix] to read-only */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO); /* Turn on auto mode using the saved zone channel * assignment */ @@ -1570,88 +1582,98 @@ static struct attribute *dme1737_attr[] ={ &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_alarm.dev_attr.attr, &sensor_dev_attr_temp1_fault.dev_attr.attr, - &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, - &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp3_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, - &sensor_dev_attr_temp3_offset.dev_attr.attr, /* Zones */ - &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_group = { + .attrs = dme1737_attr, +}; + +/* The following struct holds misc attributes, which are not available in all + * chips. Their creation depends on the chip type which is determined during + * module load. */ +static struct attribute *dme1737_misc_attr[] = { + /* Temperatures */ + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, + /* Zones */ + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, /* Misc */ &dev_attr_vrm.attr, &dev_attr_cpu0_vid.attr, NULL }; -static const struct attribute_group dme1737_group = { - .attrs = dme1737_attr, +static const struct attribute_group dme1737_misc_group = { + .attrs = dme1737_misc_attr, }; /* The following structs hold the PWM attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ -static struct attribute *dme1737_attr_pwm1[] = { +static struct attribute *dme1737_pwm1_attr[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm2[] = { +static struct attribute *dme1737_pwm2_attr[] = { &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm3[] = { +static struct attribute *dme1737_pwm3_attr[] = { &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm5[] = { +static struct attribute *dme1737_pwm5_attr[] = { &sensor_dev_attr_pwm5.dev_attr.attr, &sensor_dev_attr_pwm5_freq.dev_attr.attr, &sensor_dev_attr_pwm5_enable.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm6[] = { +static struct attribute *dme1737_pwm6_attr[] = { &sensor_dev_attr_pwm6.dev_attr.attr, &sensor_dev_attr_pwm6_freq.dev_attr.attr, &sensor_dev_attr_pwm6_enable.dev_attr.attr, @@ -1659,53 +1681,62 @@ static struct attribute *dme1737_attr_pwm6[] = { }; static const struct attribute_group dme1737_pwm_group[] = { - { .attrs = dme1737_attr_pwm1 }, - { .attrs = dme1737_attr_pwm2 }, - { .attrs = dme1737_attr_pwm3 }, + { .attrs = dme1737_pwm1_attr }, + { .attrs = dme1737_pwm2_attr }, + { .attrs = dme1737_pwm3_attr }, { .attrs = NULL }, - { .attrs = dme1737_attr_pwm5 }, - { .attrs = dme1737_attr_pwm6 }, + { .attrs = dme1737_pwm5_attr }, + { .attrs = dme1737_pwm6_attr }, +}; + +/* The following struct holds misc PWM attributes, which are not available in + * all chips. Their creation depends on the chip type which is determined + * during module load. */ +static struct attribute *dme1737_pwm_misc_attr[] = { + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, }; /* The following structs hold the fan attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ -static struct attribute *dme1737_attr_fan1[] = { +static struct attribute *dme1737_fan1_attr[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_min.dev_attr.attr, &sensor_dev_attr_fan1_alarm.dev_attr.attr, &sensor_dev_attr_fan1_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan2[] = { +static struct attribute *dme1737_fan2_attr[] = { &sensor_dev_attr_fan2_input.dev_attr.attr, &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan2_alarm.dev_attr.attr, &sensor_dev_attr_fan2_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan3[] = { +static struct attribute *dme1737_fan3_attr[] = { &sensor_dev_attr_fan3_input.dev_attr.attr, &sensor_dev_attr_fan3_min.dev_attr.attr, &sensor_dev_attr_fan3_alarm.dev_attr.attr, &sensor_dev_attr_fan3_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan4[] = { +static struct attribute *dme1737_fan4_attr[] = { &sensor_dev_attr_fan4_input.dev_attr.attr, &sensor_dev_attr_fan4_min.dev_attr.attr, &sensor_dev_attr_fan4_alarm.dev_attr.attr, &sensor_dev_attr_fan4_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan5[] = { +static struct attribute *dme1737_fan5_attr[] = { &sensor_dev_attr_fan5_input.dev_attr.attr, &sensor_dev_attr_fan5_min.dev_attr.attr, &sensor_dev_attr_fan5_alarm.dev_attr.attr, &sensor_dev_attr_fan5_max.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan6[] = { +static struct attribute *dme1737_fan6_attr[] = { &sensor_dev_attr_fan6_input.dev_attr.attr, &sensor_dev_attr_fan6_min.dev_attr.attr, &sensor_dev_attr_fan6_alarm.dev_attr.attr, @@ -1714,94 +1745,83 @@ static struct attribute *dme1737_attr_fan6[] = { }; static const struct attribute_group dme1737_fan_group[] = { - { .attrs = dme1737_attr_fan1 }, - { .attrs = dme1737_attr_fan2 }, - { .attrs = dme1737_attr_fan3 }, - { .attrs = dme1737_attr_fan4 }, - { .attrs = dme1737_attr_fan5 }, - { .attrs = dme1737_attr_fan6 }, + { .attrs = dme1737_fan1_attr }, + { .attrs = dme1737_fan2_attr }, + { .attrs = dme1737_fan3_attr }, + { .attrs = dme1737_fan4_attr }, + { .attrs = dme1737_fan5_attr }, + { .attrs = dme1737_fan6_attr }, }; -/* The permissions of all of the following attributes are changed to read- +/* The permissions of the following zone attributes are changed to read- * writeable if the chip is *not* locked. Otherwise they stay read-only. */ -static struct attribute *dme1737_attr_lock[] = { - /* Temperatures */ - &sensor_dev_attr_temp1_offset.dev_attr.attr, - &sensor_dev_attr_temp2_offset.dev_attr.attr, - &sensor_dev_attr_temp3_offset.dev_attr.attr, - /* Zones */ - &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, +static struct attribute *dme1737_zone_chmod_attr[] = { &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, - &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, NULL }; -static const struct attribute_group dme1737_lock_group = { - .attrs = dme1737_attr_lock, +static const struct attribute_group dme1737_zone_chmod_group = { + .attrs = dme1737_zone_chmod_attr, }; /* The permissions of the following PWM attributes are changed to read- * writeable if the chip is *not* locked and the respective PWM is available. * Otherwise they stay read-only. */ -static struct attribute *dme1737_attr_pwm1_lock[] = { +static struct attribute *dme1737_pwm1_chmod_attr[] = { &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm2_lock[] = { +static struct attribute *dme1737_pwm2_chmod_attr[] = { &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm3_lock[] = { +static struct attribute *dme1737_pwm3_chmod_attr[] = { &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm5_lock[] = { +static struct attribute *dme1737_pwm5_chmod_attr[] = { &sensor_dev_attr_pwm5.dev_attr.attr, &sensor_dev_attr_pwm5_freq.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm6_lock[] = { +static struct attribute *dme1737_pwm6_chmod_attr[] = { &sensor_dev_attr_pwm6.dev_attr.attr, &sensor_dev_attr_pwm6_freq.dev_attr.attr, NULL }; -static const struct attribute_group dme1737_pwm_lock_group[] = { - { .attrs = dme1737_attr_pwm1_lock }, - { .attrs = dme1737_attr_pwm2_lock }, - { .attrs = dme1737_attr_pwm3_lock }, +static const struct attribute_group dme1737_pwm_chmod_group[] = { + { .attrs = dme1737_pwm1_chmod_attr }, + { .attrs = dme1737_pwm2_chmod_attr }, + { .attrs = dme1737_pwm3_chmod_attr }, { .attrs = NULL }, - { .attrs = dme1737_attr_pwm5_lock }, - { .attrs = dme1737_attr_pwm6_lock }, + { .attrs = dme1737_pwm5_chmod_attr }, + { .attrs = dme1737_pwm6_chmod_attr }, }; /* Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the * chip is not locked. Otherwise they are read-only. */ -static struct attribute *dme1737_attr_pwm[] = { +static struct attribute *dme1737_pwm_chmod_attr[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm3.dev_attr.attr, @@ -1875,9 +1895,17 @@ static void dme1737_remove_files(struct device *dev) if (data->has_pwm & (1 << ix)) { sysfs_remove_group(&dev->kobj, &dme1737_pwm_group[ix]); + if (data->type != sch5027 && ix < 3) { + sysfs_remove_file(&dev->kobj, + dme1737_pwm_misc_attr[ix]); + } } } + if (data->type != sch5027) { + sysfs_remove_group(&dev->kobj, &dme1737_misc_group); + } + sysfs_remove_group(&dev->kobj, &dme1737_group); if (!data->client.driver) { @@ -1901,6 +1929,13 @@ static int dme1737_create_files(struct device *dev) goto exit_remove; } + /* Create misc sysfs attributes */ + if ((data->type != sch5027) && + (err = sysfs_create_group(&dev->kobj, + &dme1737_misc_group))) { + goto exit_remove; + } + /* Create fan sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { if (data->has_fan & (1 << ix)) { @@ -1918,6 +1953,11 @@ static int dme1737_create_files(struct device *dev) &dme1737_pwm_group[ix]))) { goto exit_remove; } + if (data->type != sch5027 && ix < 3 && + (err = sysfs_create_file(&dev->kobj, + dme1737_pwm_misc_attr[ix]))) { + goto exit_remove; + } } } @@ -1927,16 +1967,27 @@ static int dme1737_create_files(struct device *dev) dev_info(dev, "Device is locked. Some attributes " "will be read-only.\n"); } else { - /* Change permissions of standard attributes */ - dme1737_chmod_group(dev, &dme1737_lock_group, + /* Change permissions of zone sysfs attributes */ + dme1737_chmod_group(dev, &dme1737_zone_chmod_group, S_IRUGO | S_IWUSR); - /* Change permissions of PWM attributes */ - for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) { + /* Change permissions of misc sysfs attributes */ + if (data->type != sch5027) { + dme1737_chmod_group(dev, &dme1737_misc_group, + S_IRUGO | S_IWUSR); + } + + /* Change permissions of PWM sysfs attributes */ + for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) { if (data->has_pwm & (1 << ix)) { dme1737_chmod_group(dev, - &dme1737_pwm_lock_group[ix], + &dme1737_pwm_chmod_group[ix], + S_IRUGO | S_IWUSR); + if (data->type != sch5027 && ix < 3) { + dme1737_chmod_file(dev, + dme1737_pwm_misc_attr[ix], S_IRUGO | S_IWUSR); + } } } @@ -1945,7 +1996,7 @@ static int dme1737_create_files(struct device *dev) if ((data->has_pwm & (1 << ix)) && (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) { dme1737_chmod_file(dev, - dme1737_attr_pwm[ix], + dme1737_pwm_chmod_attr[ix], S_IRUGO | S_IWUSR); } } @@ -1966,6 +2017,9 @@ static int dme1737_init_device(struct device *dev) int ix; u8 reg; + /* Point to the right nominal voltages array */ + data->in_nominal = IN_NOMINAL(data->type); + data->config = dme1737_read(client, DME1737_REG_CONFIG); /* Inform if part is not monitoring/started */ if (!(data->config & 0x01)) { @@ -2076,7 +2130,9 @@ static int dme1737_init_device(struct device *dev) data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ /* Set VRM */ - data->vrm = vid_which_vrm(); + if (data->type != sch5027) { + data->vrm = vid_which_vrm(); + } return 0; } @@ -2095,9 +2151,10 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data) dme1737_sio_enter(sio_cip); /* Check device ID - * The DME1737 can return either 0x78 or 0x77 as its device ID. */ + * The DME1737 can return either 0x78 or 0x77 as its device ID. + * The SCH5027 returns 0x89 as its device ID. */ reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); - if (!(reg == 0x77 || reg == 0x78)) { + if (!(reg == 0x77 || reg == 0x78 || reg == 0x89)) { err = -ENODEV; goto exit; } @@ -2166,15 +2223,24 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address, company = dme1737_read(client, DME1737_REG_COMPANY); verstep = dme1737_read(client, DME1737_REG_VERSTEP); - if (!((company == DME1737_COMPANY_SMSC) && - ((verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP))) { + if (company == DME1737_COMPANY_SMSC && + (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) { + kind = dme1737; + } else if (company == DME1737_COMPANY_SMSC && + verstep == SCH5027_VERSTEP) { + kind = sch5027; + } else { err = -ENODEV; goto exit_kfree; } } - kind = dme1737; - name = "dme1737"; + if (kind == sch5027) { + name = "sch5027"; + } else { + kind = dme1737; + name = "dme1737"; + } data->type = kind; /* Fill in the remaining client fields and put it into the global @@ -2187,8 +2253,9 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address, goto exit_kfree; } - dev_info(dev, "Found a DME1737 chip at 0x%02x (rev 0x%02x).\n", - client->addr, verstep); + dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n", + kind == sch5027 ? "SCH5027" : "DME1737", client->addr, + verstep); /* Initialize the DME1737 chip */ if ((err = dme1737_init_device(dev))) { @@ -2360,15 +2427,18 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev) client->addr = res->start; platform_set_drvdata(pdev, data); - company = dme1737_read(client, DME1737_REG_COMPANY); - device = dme1737_read(client, DME1737_REG_DEVICE); + /* Skip chip detection if module is loaded with force_id parameter */ + if (!force_id) { + company = dme1737_read(client, DME1737_REG_COMPANY); + device = dme1737_read(client, DME1737_REG_DEVICE); - if (!((company == DME1737_COMPANY_SMSC) && - (device == SCH311X_DEVICE))) { - err = -ENODEV; - goto exit_kfree; + if (!((company == DME1737_COMPANY_SMSC) && + (device == SCH311X_DEVICE))) { + err = -ENODEV; + goto exit_kfree; + } } - data->type = -1; + data->type = sch311x; /* Fill in the remaining client fields and initialize the mutex */ strlcpy(client->name, "sch311x", I2C_NAME_SIZE); diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index cbeb4984b5c7..67067e9a323e 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -87,8 +87,6 @@ static inline void superio_enter(int base); static inline void superio_select(int base, int ld); static inline void superio_exit(int base); -static inline u16 fan_from_reg ( u16 reg ); - struct f71882fg_data { unsigned short addr; struct device *hwmon_dev; @@ -116,10 +114,6 @@ struct f71882fg_data { u8 temp_diode_open; }; -static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg); -static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg); -static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val); - /* Sysfs in*/ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, char *buf); diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 3330667280b9..7b0a32c4dcfb 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -1,76 +1,74 @@ /* - hwmon-vid.c - VID/VRM/VRD voltage conversions - - Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz> - - Partly imported from i2c-vid.h of the lm_sensors project - Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> - With assistance from Trent Piepho <xyzzy@speakeasy.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + * hwmon-vid.c - VID/VRM/VRD voltage conversions + * + * Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz> + * + * Partly imported from i2c-vid.h of the lm_sensors project + * Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> + * With assistance from Trent Piepho <xyzzy@speakeasy.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/hwmon-vid.h> /* - Common code for decoding VID pins. - - References: - - For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines", - available at http://developer.intel.com/. - - For VRD 10.0 and up, "VRD x.y Design Guide", - available at http://developer.intel.com/. - - AMD Opteron processors don't follow the Intel specifications. - I'm going to "make up" 2.4 as the spec number for the Opterons. - No good reason just a mnemonic for the 24x Opteron processor - series. - - Opteron VID encoding is: - 00000 = 1.550 V - 00001 = 1.525 V - . . . . - 11110 = 0.800 V - 11111 = 0.000 V (off) - - The 17 specification is in fact Intel Mobile Voltage Positioning - - (IMVP-II). You can find more information in the datasheet of Max1718 - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 - - The 13 specification corresponds to the Intel Pentium M series. There - doesn't seem to be any named specification for these. The conversion - tables are detailed directly in the various Pentium M datasheets: - http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm - - The 14 specification corresponds to Intel Core series. There - doesn't seem to be any named specification for these. The conversion - tables are detailed directly in the various Pentium Core datasheets: - http://www.intel.com/design/mobile/datashts/309221.htm - - The 110 (VRM 11) specification corresponds to Intel Conroe based series. - http://www.intel.com/design/processor/applnots/313214.htm -*/ - -/* vrm is the VRM/VRD document version multiplied by 10. - val is the 4-bit or more VID code. - Returned value is in mV to avoid floating point in the kernel. - Some VID have some bits in uV scale, this is rounded to mV */ + * Common code for decoding VID pins. + * + * References: + * + * For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines", + * available at http://developer.intel.com/. + * + * For VRD 10.0 and up, "VRD x.y Design Guide", + * available at http://developer.intel.com/. + * + * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf + * Table 71. VID Code Voltages + * AMD Opteron processors don't follow the Intel specifications. + * I'm going to "make up" 2.4 as the spec number for the Opterons. + * No good reason just a mnemonic for the 24x Opteron processor + * series. + * + * The 17 specification is in fact Intel Mobile Voltage Positioning - + * (IMVP-II). You can find more information in the datasheet of Max1718 + * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 + * + * The 13 specification corresponds to the Intel Pentium M series. There + * doesn't seem to be any named specification for these. The conversion + * tables are detailed directly in the various Pentium M datasheets: + * http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm + * + * The 14 specification corresponds to Intel Core series. There + * doesn't seem to be any named specification for these. The conversion + * tables are detailed directly in the various Pentium Core datasheets: + * http://www.intel.com/design/mobile/datashts/309221.htm + * + * The 110 (VRM 11) specification corresponds to Intel Conroe based series. + * http://www.intel.com/design/processor/applnots/313214.htm + */ + +/* + * vrm is the VRM/VRD document version multiplied by 10. + * val is the 4-bit or more VID code. + * Returned value is in mV to avoid floating point in the kernel. + * Some VID have some bits in uV scale, this is rounded to mV. + */ int vid_from_reg(int val, u8 vrm) { int vid; @@ -96,9 +94,11 @@ int vid_from_reg(int val, u8 vrm) if (val < 0x02 || val > 0xb2) return 0; return((1600000 - (val - 2) * 6250 + 500) / 1000); - case 24: /* Opteron processor */ - val &= 0x1f; - return(val == 0x1f ? 0 : 1550 - val * 25); + + case 24: /* AMD NPT 0Fh (Athlon64 & Opteron) */ + val &= 0x3f; + return (val < 32) ? 1550 - 25 * val + : 775 - (25 * (val - 31)) / 2; case 91: /* VRM 9.1 */ case 90: /* VRM 9.0 */ @@ -141,9 +141,9 @@ int vid_from_reg(int val, u8 vrm) /* - After this point is the code to automatically determine which - VRM/VRD specification should be used depending on the CPU. -*/ + * After this point is the code to automatically determine which + * VRM/VRD specification should be used depending on the CPU. + */ struct vrm_model { u8 vendor; diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index e12c132ff83a..30cdb0956779 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -151,9 +151,9 @@ static int fix_pwm_polarity; /* The IT8718F has the VID value in a different register, in Super-I/O configuration space. */ #define IT87_REG_VID 0x0a -/* Warning: register 0x0b is used for something completely different in - new chips/revisions. I suspect only 16-bit tachometer mode will work - for these. */ +/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b + for fan divisors. Later IT8712F revisions must use 16-bit tachometer + mode. */ #define IT87_REG_FAN_DIV 0x0b #define IT87_REG_FAN_16BIT 0x0c @@ -234,6 +234,7 @@ static const unsigned int pwm_freq[8] = { struct it87_sio_data { enum chips type; /* Values read from Super-I/O config space */ + u8 revision; u8 vid_value; }; @@ -242,6 +243,7 @@ struct it87_sio_data { struct it87_data { struct device *hwmon_dev; enum chips type; + u8 revision; unsigned short addr; const char *name; @@ -268,6 +270,16 @@ struct it87_data { u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ }; +static inline int has_16bit_fans(const struct it87_data *data) +{ + /* IT8705F Datasheet 0.4.1, 3h == Version G. + IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. + These are the first revisions with 16bit tachometer support. */ + return (data->type == it87 && data->revision >= 0x03) + || (data->type == it8712 && data->revision >= 0x07) + || data->type == it8716 + || data->type == it8718; +} static int it87_probe(struct platform_device *pdev); static int __devexit it87_remove(struct platform_device *pdev); @@ -991,8 +1003,9 @@ static int __init it87_find(unsigned short *address, } err = 0; + sio_data->revision = superio_inb(DEVREV) & 0x0f; pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", - chip_type, *address, superio_inb(DEVREV) & 0x0f); + chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ if (chip_type != IT8705F_DEVID) { @@ -1045,6 +1058,7 @@ static int __devinit it87_probe(struct platform_device *pdev) data->addr = res->start; data->type = sio_data->type; + data->revision = sio_data->revision; data->name = names[sio_data->type]; /* Now, we do the remaining detection. */ @@ -1069,7 +1083,7 @@ static int __devinit it87_probe(struct platform_device *pdev) goto ERROR2; /* Do not create fan files for disabled fans */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { /* 16-bit tachometers */ if (data->has_fan & (1 << 0)) { if ((err = device_create_file(dev, @@ -1350,7 +1364,7 @@ static void __devinit it87_init_device(struct platform_device *pdev) data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; /* Set tachometers to 16-bit mode if needed */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { tmp = it87_read_value(data, IT87_REG_FAN_16BIT); if (~tmp & 0x07 & data->has_fan) { dev_dbg(&pdev->dev, @@ -1358,10 +1372,13 @@ static void __devinit it87_init_device(struct platform_device *pdev) it87_write_value(data, IT87_REG_FAN_16BIT, tmp | 0x07); } - if (tmp & (1 << 4)) - data->has_fan |= (1 << 3); /* fan4 enabled */ - if (tmp & (1 << 5)) - data->has_fan |= (1 << 4); /* fan5 enabled */ + /* IT8705F only supports three fans. */ + if (data->type != it87) { + if (tmp & (1 << 4)) + data->has_fan |= (1 << 3); /* fan4 enabled */ + if (tmp & (1 << 5)) + data->has_fan |= (1 << 4); /* fan5 enabled */ + } } /* Set current fan mode registers and the default settings for the @@ -1426,7 +1443,7 @@ static struct it87_data *it87_update_device(struct device *dev) data->fan[i] = it87_read_value(data, IT87_REG_FAN[i]); /* Add high byte if in 16-bit mode */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { data->fan[i] |= it87_read_value(data, IT87_REG_FANX[i]) << 8; data->fan_min[i] |= it87_read_value(data, @@ -1443,8 +1460,7 @@ static struct it87_data *it87_update_device(struct device *dev) } /* Newer chips don't have clock dividers */ - if ((data->has_fan & 0x07) && data->type != it8716 - && data->type != it8718) { + if ((data->has_fan & 0x07) && !has_16bit_fans(data)) { i = it87_read_value(data, IT87_REG_FAN_DIV); data->fan_div[0] = i & 0x07; data->fan_div[1] = (i >> 3) & 0x07; @@ -1460,7 +1476,8 @@ static struct it87_data *it87_update_device(struct device *dev) data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL); data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); - /* The 8705 does not have VID capability */ + /* The 8705 does not have VID capability. + The 8718 does not use IT87_REG_VID for the same purpose. */ if (data->type == it8712 || data->type == it8716) { data->vid = it87_read_value(data, IT87_REG_VID); /* The older IT8712F revisions had only 5 VID pins, diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index 3b01001108c1..7d97431e132f 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -55,8 +55,11 @@ I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs " static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 }; static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C }; static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; +static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 }; +static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 }; #define THMC50_REG_CONF_nFANOFF 0x20 +#define THMC50_REG_CONF_PROGRAMMED 0x08 /* Each client has this additional data */ struct thmc50_data { @@ -72,6 +75,7 @@ struct thmc50_data { s8 temp_input[3]; s8 temp_max[3]; s8 temp_min[3]; + s8 temp_critical[3]; u8 analog_out; u8 alarms; }; @@ -199,6 +203,15 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, return count; } +static ssize_t show_temp_critical(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct thmc50_data *data = thmc50_update_device(dev); + return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000); +} + static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, char *buf) { @@ -214,7 +227,9 @@ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \ static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ show_temp_min, set_temp_min, offset - 1); \ static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); + show_temp_max, set_temp_max, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO, \ + show_temp_critical, NULL, offset - 1); temp_reg(1); temp_reg(2); @@ -234,10 +249,12 @@ static struct attribute *thmc50_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_alarm.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr, @@ -254,6 +271,7 @@ static struct attribute *temp3_attributes[] = { &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, NULL @@ -429,6 +447,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev) int temps = data->has_temp3 ? 3 : 2; int i; + int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); + + prog &= THMC50_REG_CONF_PROGRAMMED; + for (i = 0; i < temps; i++) { data->temp_input[i] = i2c_smbus_read_byte_data(client, THMC50_REG_TEMP[i]); @@ -436,6 +458,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev) THMC50_REG_TEMP_MAX[i]); data->temp_min[i] = i2c_smbus_read_byte_data(client, THMC50_REG_TEMP_MIN[i]); + data->temp_critical[i] = + i2c_smbus_read_byte_data(client, + prog ? THMC50_REG_TEMP_CRITICAL[i] + : THMC50_REG_TEMP_DEFAULT[i]); } data->analog_out = i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 9564fb069957..b30e5796cb26 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0); MODULE_PARM_DESC(force_i2c, "Initialize the i2c address of the sensors"); -static int reset; -module_param(reset, bool, 0); -MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); - static int init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); @@ -209,6 +205,13 @@ static const u16 w83627hf_reg_temp_over[] = { 0x39, 0x155, 0x255 }; #define W83627HF_REG_PWM1 0x5A #define W83627HF_REG_PWM2 0x5B +static const u8 W83627THF_REG_PWM_ENABLE[] = { + 0x04, /* FAN 1 mode */ + 0x04, /* FAN 2 mode */ + 0x12, /* FAN AUX mode */ +}; +static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 }; + #define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */ #define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */ #define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */ @@ -366,6 +369,9 @@ struct w83627hf_data { u32 alarms; /* Register encoding, combined */ u32 beep_mask; /* Register encoding, combined */ u8 pwm[3]; /* Register value */ + u8 pwm_enable[3]; /* 1 = manual + 2 = thermal cruise (also called SmartFan I) + 3 = fan speed cruise */ u8 pwm_freq[3]; /* Register value */ u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode; 4 = thermistor */ @@ -957,6 +963,42 @@ static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1); static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2); static ssize_t +show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_enable[nr]); +} + +static ssize_t +store_pwm_enable(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val = simple_strtoul(buf, NULL, 10); + u8 reg; + + if (!val || (val > 3)) /* modes 1, 2 and 3 are supported */ + return -EINVAL; + mutex_lock(&data->update_lock); + data->pwm_enable[nr] = val; + reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]); + reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]); + reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr]; + w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 2); + +static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf) { int nr = to_sensor_dev_attr(devattr)->index; @@ -1223,6 +1265,11 @@ static struct attribute *w83627hf_attributes_opt[] = { &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + NULL }; @@ -1366,6 +1413,19 @@ static int __devinit w83627hf_probe(struct platform_device *pdev) &sensor_dev_attr_pwm3_freq.dev_attr))) goto ERROR4; + if (data->type != w83627hf) + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm1_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2_enable.dev_attr))) + goto ERROR4; + + if (data->type == w83627thf || data->type == w83637hf + || data->type == w83687thf) + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm3_enable.dev_attr))) + goto ERROR4; + data->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); @@ -1536,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev) enum chips type = data->type; u8 tmp; - if (reset) { - /* Resetting the chip has been the default for a long time, - but repeatedly caused problems (fans going to full - speed...) so it is now optional. It might even go away if - nobody reports it as being useful, as I see very little - reason why this would be needed at all. */ - dev_info(&pdev->dev, "If reset=1 solved a problem you were " - "having, please report!\n"); - - /* save this register */ - i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG); - /* Reset all except Watchdog values and last conversion values - This sets fan-divs to 2, among others */ - w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80); - /* Restore the register and disable power-on abnormal beep. - This saves FAN 1/2/3 input/output values set by BIOS. */ - w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80); - /* Disable master beep-enable (reset turns it on). - Individual beeps should be reset to off but for some reason - disabling this bit helps some people not get beeped */ - w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0); - } - /* Minimize conflicts with other winbond i2c-only clients... */ /* disable i2c subclients... how to disable main i2c client?? */ /* force i2c address to relatively uncommon address */ @@ -1655,6 +1692,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) { struct w83627hf_data *data = dev_get_drvdata(dev); int i, num_temps = (data->type == w83697hf) ? 2 : 3; + int num_pwms = (data->type == w83697hf) ? 2 : 3; mutex_lock(&data->update_lock); @@ -1707,6 +1745,15 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) break; } } + if (data->type != w83627hf) { + for (i = 0; i < num_pwms; i++) { + u8 tmp = w83627hf_read_value(data, + W83627THF_REG_PWM_ENABLE[i]); + data->pwm_enable[i] = + ((tmp >> W83627THF_PWM_ENABLE_SHIFT[i]) + & 0x03) + 1; + } + } for (i = 0; i < num_temps; i++) { data->temp[i] = w83627hf_read_value( data, w83627hf_reg_temp[i]); diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index e4e91c9d480a..daa7d121483b 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -233,11 +233,9 @@ static u8 fan_to_reg(long rpm, int div) static u8 div_to_reg(int nr, long val) { int i; - int max; - /* first three fan's divisor max out at 8, rest max out at 128 */ - max = (nr < 3) ? 8 : 128; - val = SENSORS_LIMIT(val, 1, max) >> 1; + /* fan divisors max out at 128 */ + val = SENSORS_LIMIT(val, 1, 128) >> 1; for (i = 0; i < 7; i++) { if (val == 0) break; @@ -530,6 +528,7 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, unsigned long min; u8 tmp_fan_div; u8 fan_div_reg; + u8 vbat_reg; int indx = 0; u8 keep_mask = 0; u8 new_shift = 0; @@ -581,6 +580,16 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, w83791d_write(client, W83791D_REG_FAN_DIV[indx], fan_div_reg | tmp_fan_div); + /* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */ + if (nr < 3) { + keep_mask = ~(1 << (nr + 5)); + vbat_reg = w83791d_read(client, W83791D_REG_VBAT) + & keep_mask; + tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask; + w83791d_write(client, W83791D_REG_VBAT, + vbat_reg | tmp_fan_div); + } + /* Restore fan_min */ data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr])); w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); @@ -1182,6 +1191,7 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) struct w83791d_data *data = i2c_get_clientdata(client); int i, j; u8 reg_array_tmp[3]; + u8 vbat_reg; mutex_lock(&data->update_lock); @@ -1219,6 +1229,12 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) data->fan_div[3] = reg_array_tmp[2] & 0x07; data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07; + /* The fan divisor for fans 0-2 get bit 2 from + bits 5-7 respectively of vbat register */ + vbat_reg = w83791d_read(client, W83791D_REG_VBAT); + for (i = 0; i < 3; i++) + data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04; + /* Update the first temperature sensor */ for (i = 0; i < 3; i++) { data->temp1[i] = w83791d_read(client, |