summaryrefslogtreecommitdiff
path: root/include/linux/dio.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/dio.h
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/dio.h')
-rw-r--r--include/linux/dio.h312
1 files changed, 312 insertions, 0 deletions
diff --git a/include/linux/dio.h b/include/linux/dio.h
new file mode 100644
index 000000000000..fae9395fcf4f
--- /dev/null
+++ b/include/linux/dio.h
@@ -0,0 +1,312 @@
+/* header file for DIO boards for the HP300 architecture.
+ * Maybe this should handle DIO-II later?
+ * The general structure of this is vaguely based on how
+ * the Amiga port handles Zorro boards.
+ * Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk>
+ * Converted to driver model Jochen Friedrich <jochen@scram.de>
+ *
+ * The board IDs are from the NetBSD kernel, which for once provided
+ * helpful comments...
+ *
+ * This goes with drivers/dio/dio.c
+ */
+
+#ifndef _LINUX_DIO_H
+#define _LINUX_DIO_H
+
+/* The DIO boards in a system are distinguished by 'select codes' which
+ * range from 0-63 (DIO) and 132-255 (DIO-II).
+ * The DIO board with select code sc is located at physical address
+ * 0x600000 + sc * 0x10000
+ * So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and
+ * [0x800000-0x1000000) are for additional space required by things
+ * like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O.
+ * On Linux, this is currently all mapped into the virtual address space
+ * at 0xf0000000 on bootup.
+ * DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000
+ * which is address range [0x1000000-0x20000000) -- too big to map completely,
+ * so currently we just don't handle DIO-II boards. It wouldn't be hard to
+ * do with ioremap() though.
+ */
+
+#include <linux/device.h>
+
+#ifdef __KERNEL__
+
+#include <asm/hp300hw.h>
+
+typedef __u16 dio_id;
+
+ /*
+ * DIO devices
+ */
+
+struct dio_dev {
+ struct dio_bus *bus;
+ dio_id id;
+ int scode;
+ struct dio_driver *driver; /* which driver has allocated this device */
+ struct device dev; /* Generic device interface */
+ u8 ipl;
+ char name[64];
+ struct resource resource;
+};
+
+#define to_dio_dev(n) container_of(n, struct dio_dev, dev)
+
+ /*
+ * DIO bus
+ */
+
+struct dio_bus {
+ struct list_head devices; /* list of devices on this bus */
+ unsigned int num_resources; /* number of resources */
+ struct resource resources[2]; /* address space routed to this bus */
+ struct device dev;
+ char name[10];
+};
+
+extern struct dio_bus dio_bus; /* Single DIO bus */
+extern struct bus_type dio_bus_type;
+
+ /*
+ * DIO device IDs
+ */
+
+struct dio_device_id {
+ dio_id id; /* Device ID or DIO_WILDCARD */
+ unsigned long driver_data; /* Data private to the driver */
+};
+
+ /*
+ * DIO device drivers
+ */
+
+struct dio_driver {
+ struct list_head node;
+ char *name;
+ const struct dio_device_id *id_table; /* NULL if wants all devices */
+ int (*probe)(struct dio_dev *z, const struct dio_device_id *id);
+/* New device inserted */
+ void (*remove)(struct dio_dev *z); /* Device removed (NULL if not a hot-plug capable driver) */
+ struct device_driver driver;
+};
+
+#define to_dio_driver(drv) container_of(drv, struct dio_driver, driver)
+
+/* DIO/DIO-II boards all have the following 8bit registers.
+ * These are offsets from the base of the device.
+ */
+#define DIO_IDOFF 0x01 /* primary device ID */
+#define DIO_IPLOFF 0x03 /* interrupt priority level */
+#define DIO_SECIDOFF 0x15 /* secondary device ID */
+#define DIOII_SIZEOFF 0x101 /* device size, DIO-II only */
+#define DIO_VIRADDRBASE 0xf0000000UL /* vir addr where IOspace is mapped */
+
+#define DIO_BASE 0x600000 /* start of DIO space */
+#define DIO_END 0x1000000 /* end of DIO space */
+#define DIO_DEVSIZE 0x10000 /* size of a DIO device */
+
+#define DIOII_BASE 0x01000000 /* start of DIO-II space */
+#define DIOII_END 0x20000000 /* end of DIO-II space */
+#define DIOII_DEVSIZE 0x00400000 /* size of a DIO-II device */
+
+/* Highest valid select code. If we add DIO-II support this should become
+ * 256 for everything except HP320, which only has DIO.
+ */
+#define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
+#define DIOII_SCBASE 132 /* lowest DIO-II select code */
+#define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
+#define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)
+
+/* macros to read device IDs, given base address */
+#define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
+#define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF)
+
+/* extract the interrupt level */
+#define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3)
+
+/* find the size of a DIO-II board's address space.
+ * DIO boards are all fixed length.
+ */
+#define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000)
+
+/* general purpose macro for both DIO and DIO-II */
+#define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE)
+
+/* The hardware has primary and secondary IDs; we encode these in a single
+ * int as PRIMARY ID & (SECONDARY ID << 8).
+ * In practice this is only important for framebuffers,
+ * and everybody else just sets ID fields equal to the DIO_ID_FOO value.
+ */
+#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
+/* macro to determine whether a given primary ID requires a secondary ID byte */
+#define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
+#define DIO_WILDCARD 0xff
+
+/* Now a whole slew of macros giving device IDs and descriptive strings: */
+#define DIO_ID_DCA0 0x02 /* 98644A serial */
+#define DIO_DESC_DCA0 "98644A DCA0 serial"
+#define DIO_ID_DCA0REM 0x82 /* 98644A serial */
+#define DIO_DESC_DCA0REM "98644A DCA0REM serial"
+#define DIO_ID_DCA1 0x42 /* 98644A serial */
+#define DIO_DESC_DCA1 "98644A DCA1 serial"
+#define DIO_ID_DCA1REM 0xc2 /* 98644A serial */
+#define DIO_DESC_DCA1REM "98644A DCA1REM serial"
+#define DIO_ID_DCM 0x05 /* 98642A serial MUX */
+#define DIO_DESC_DCM "98642A DCM serial MUX"
+#define DIO_ID_DCMREM 0x85 /* 98642A serial MUX */
+#define DIO_DESC_DCMREM "98642A DCMREM serial MUX"
+#define DIO_ID_LAN 0x15 /* 98643A LAN */
+#define DIO_DESC_LAN "98643A LANCE ethernet"
+#define DIO_ID_FHPIB 0x08 /* 98625A/98625B fast HP-IB */
+#define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
+#define DIO_ID_NHPIB 0x01 /* 98624A HP-IB (normal ie slow) */
+#define DIO_DESC_NHPIB "98624A HPIB"
+#define DIO_ID_SCSI0 0x07 /* 98265A SCSI */
+#define DIO_DESC_SCSI0 "98265A SCSI0"
+#define DIO_ID_SCSI1 0x27 /* ditto */
+#define DIO_DESC_SCSI1 "98265A SCSI1"
+#define DIO_ID_SCSI2 0x47 /* ditto */
+#define DIO_DESC_SCSI2 "98265A SCSI2"
+#define DIO_ID_SCSI3 0x67 /* ditto */
+#define DIO_DESC_SCSI3 "98265A SCSI3"
+#define DIO_ID_FBUFFER 0x39 /* framebuffer: flavour is distinguished by secondary ID */
+#define DIO_DESC_FBUFFER "bitmapped display"
+/* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */
+#define DIO_ID_MISC0 0x03 /* 98622A */
+#define DIO_DESC_MISC0 "98622A"
+#define DIO_ID_MISC1 0x04 /* 98623A */
+#define DIO_DESC_MISC1 "98623A"
+#define DIO_ID_PARALLEL 0x06 /* internal parallel */
+#define DIO_DESC_PARALLEL "internal parallel"
+#define DIO_ID_MISC2 0x09 /* 98287A keyboard */
+#define DIO_DESC_MISC2 "98287A keyboard"
+#define DIO_ID_MISC3 0x0a /* HP98635A FP accelerator */
+#define DIO_DESC_MISC3 "HP98635A FP accelerator"
+#define DIO_ID_MISC4 0x0b /* timer */
+#define DIO_DESC_MISC4 "timer"
+#define DIO_ID_MISC5 0x12 /* 98640A */
+#define DIO_DESC_MISC5 "98640A"
+#define DIO_ID_MISC6 0x16 /* 98659A */
+#define DIO_DESC_MISC6 "98659A"
+#define DIO_ID_MISC7 0x19 /* 237 display */
+#define DIO_DESC_MISC7 "237 display"
+#define DIO_ID_MISC8 0x1a /* quad-wide card */
+#define DIO_DESC_MISC8 "quad-wide card"
+#define DIO_ID_MISC9 0x1b /* 98253A */
+#define DIO_DESC_MISC9 "98253A"
+#define DIO_ID_MISC10 0x1c /* 98627A */
+#define DIO_DESC_MISC10 "98253A"
+#define DIO_ID_MISC11 0x1d /* 98633A */
+#define DIO_DESC_MISC11 "98633A"
+#define DIO_ID_MISC12 0x1e /* 98259A */
+#define DIO_DESC_MISC12 "98259A"
+#define DIO_ID_MISC13 0x1f /* 8741 */
+#define DIO_DESC_MISC13 "8741"
+#define DIO_ID_VME 0x31 /* 98577A VME adapter */
+#define DIO_DESC_VME "98577A VME adapter"
+#define DIO_ID_DCL 0x34 /* 98628A serial */
+#define DIO_DESC_DCL "98628A DCL serial"
+#define DIO_ID_DCLREM 0xb4 /* 98628A serial */
+#define DIO_DESC_DCLREM "98628A DCLREM serial"
+/* These are the secondary IDs for the framebuffers */
+#define DIO_ID2_GATORBOX 0x01 /* 98700/98710 "gatorbox" */
+#define DIO_DESC2_GATORBOX "98700/98710 \"gatorbox\" display"
+#define DIO_ID2_TOPCAT 0x02 /* 98544/98545/98547 "topcat" */
+#define DIO_DESC2_TOPCAT "98544/98545/98547 \"topcat\" display"
+#define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */
+#define DIO_DESC2_RENAISSANCE "98720/98721 \"renaissance\" display"
+#define DIO_ID2_LRCATSEYE 0x05 /* lowres "catseye" */
+#define DIO_DESC2_LRCATSEYE "low-res catseye display"
+#define DIO_ID2_HRCCATSEYE 0x06 /* highres colour "catseye" */
+#define DIO_DESC2_HRCCATSEYE "high-res color catseye display"
+#define DIO_ID2_HRMCATSEYE 0x07 /* highres mono "catseye" */
+#define DIO_DESC2_HRMCATSEYE "high-res mono catseye display"
+#define DIO_ID2_DAVINCI 0x08 /* 98730/98731 "davinci" */
+#define DIO_DESC2_DAVINCI "98730/98731 \"davinci\" display"
+#define DIO_ID2_XXXCATSEYE 0x09 /* "catseye" */
+#define DIO_DESC2_XXXCATSEYE "catseye display"
+#define DIO_ID2_HYPERION 0x0e /* A1096A "hyperion" */
+#define DIO_DESC2_HYPERION "A1096A \"hyperion\" display"
+#define DIO_ID2_XGENESIS 0x0b /* "x-genesis"; no NetBSD support */
+#define DIO_DESC2_XGENESIS "\"x-genesis\" display"
+#define DIO_ID2_TIGER 0x0c /* "tiger"; no NetBSD support */
+#define DIO_DESC2_TIGER "\"tiger\" display"
+#define DIO_ID2_YGENESIS 0x0d /* "y-genesis"; no NetBSD support */
+#define DIO_DESC2_YGENESIS "\"y-genesis\" display"
+/* if you add new IDs then you should tell dio.c about them so it can
+ * identify them...
+ */
+
+extern int dio_find(int deviceid);
+extern unsigned long dio_scodetophysaddr(int scode);
+extern void dio_create_sysfs_dev_files(struct dio_dev *);
+
+/* New-style probing */
+extern int dio_register_driver(struct dio_driver *);
+extern void dio_unregister_driver(struct dio_driver *);
+extern const struct dio_device_id *dio_match_device(const struct dio_device_id *ids, const struct dio_dev *z);
+static inline struct dio_driver *dio_dev_driver(const struct dio_dev *d)
+{
+ return d->driver;
+}
+
+#define dio_resource_start(d) ((d)->resource.start)
+#define dio_resource_end(d) ((d)->resource.end)
+#define dio_resource_len(d) ((d)->resource.end-(d)->resource.start+1)
+#define dio_resource_flags(d) ((d)->resource.flags)
+
+#define dio_request_device(d, name) \
+ request_mem_region(dio_resource_start(d), dio_resource_len(d), name)
+#define dio_release_device(d) \
+ release_mem_region(dio_resource_start(d), dio_resource_len(d))
+
+/* Similar to the helpers above, these manipulate per-dio_dev
+ * driver-specific data. They are really just a wrapper around
+ * the generic device structure functions of these calls.
+ */
+static inline void *dio_get_drvdata (struct dio_dev *d)
+{
+ return dev_get_drvdata(&d->dev);
+}
+
+static inline void dio_set_drvdata (struct dio_dev *d, void *data)
+{
+ dev_set_drvdata(&d->dev, data);
+}
+
+/*
+ * A helper function which helps ensure correct dio_driver
+ * setup and cleanup for commonly-encountered hotplug/modular cases
+ *
+ * This MUST stay in a header, as it checks for -DMODULE
+ */
+static inline int dio_module_init(struct dio_driver *drv)
+{
+ int rc = dio_register_driver(drv);
+
+ if (rc > 0)
+ return 0;
+
+ /* iff CONFIG_HOTPLUG and built into kernel, we should
+ * leave the driver around for future hotplug events.
+ * For the module case, a hotplug daemon of some sort
+ * should load a module in response to an insert event. */
+#if defined(CONFIG_HOTPLUG) && !defined(MODULE)
+ if (rc == 0)
+ return 0;
+#else
+ if (rc == 0)
+ rc = -ENODEV;
+#endif
+
+ /* if we get here, we need to clean up DIO driver instance
+ * and return some sort of error */
+ dio_unregister_driver(drv);
+
+ return rc;
+}
+
+#endif /* __KERNEL__ */
+#endif /* ndef _LINUX_DIO_H */