summaryrefslogtreecommitdiff
path: root/include/linux/dma
diff options
context:
space:
mode:
authorVinod Koul <vkoul@kernel.org>2020-11-09 11:54:50 +0300
committerVinod Koul <vkoul@kernel.org>2020-11-24 19:12:07 +0300
commit5d0c3533a19f48e5e7e73806a3e4b29cd4364130 (patch)
tree4160c5fdfd60b8453f6ab35c2f95254de6163f47 /include/linux/dma
parente7bbb7acabf47d74672e0e314bed4d452d2097b4 (diff)
downloadlinux-5d0c3533a19f48e5e7e73806a3e4b29cd4364130.tar.xz
dmaengine: qcom: Add GPI dma driver
This controller provides DMAengine capabilities for a variety of peripheral buses such as I2C, UART, and SPI. By using GPI dmaengine driver, bus drivers can use a standardize interface that is protocol independent to transfer data between memory and peripheral. Link: https://lore.kernel.org/r/20201109085450.24843-4-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'include/linux/dma')
-rw-r--r--include/linux/dma/qcom-gpi-dma.h83
1 files changed, 83 insertions, 0 deletions
diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h
new file mode 100644
index 000000000000..f46dc3372f11
--- /dev/null
+++ b/include/linux/dma/qcom-gpi-dma.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#ifndef QCOM_GPI_DMA_H
+#define QCOM_GPI_DMA_H
+
+/**
+ * enum spi_transfer_cmd - spi transfer commands
+ */
+enum spi_transfer_cmd {
+ SPI_TX = 1,
+ SPI_RX,
+ SPI_DUPLEX,
+};
+
+/**
+ * struct gpi_spi_config - spi config for peripheral
+ *
+ * @loopback_en: spi loopback enable when set
+ * @clock_pol_high: clock polarity
+ * @data_pol_high: data polarity
+ * @pack_en: process tx/rx buffers as packed
+ * @word_len: spi word length
+ * @clk_div: source clock divider
+ * @clk_src: serial clock
+ * @cmd: spi cmd
+ * @fragmentation: keep CS assserted at end of sequence
+ * @cs: chip select toggle
+ * @set_config: set peripheral config
+ * @rx_len: receive length for buffer
+ */
+struct gpi_spi_config {
+ u8 set_config;
+ u8 loopback_en;
+ u8 clock_pol_high;
+ u8 data_pol_high;
+ u8 pack_en;
+ u8 word_len;
+ u8 fragmentation;
+ u8 cs;
+ u32 clk_div;
+ u32 clk_src;
+ enum spi_transfer_cmd cmd;
+ u32 rx_len;
+};
+
+enum i2c_op {
+ I2C_WRITE = 1,
+ I2C_READ,
+};
+
+/**
+ * struct gpi_i2c_config - i2c config for peripheral
+ *
+ * @pack_enable: process tx/rx buffers as packed
+ * @cycle_count: clock cycles to be sent
+ * @high_count: high period of clock
+ * @low_count: low period of clock
+ * @clk_div: source clock divider
+ * @addr: i2c bus address
+ * @stretch: stretch the clock at eot
+ * @set_config: set peripheral config
+ * @rx_len: receive length for buffer
+ * @op: i2c cmd
+ * @muli-msg: is part of multi i2c r-w msgs
+ */
+struct gpi_i2c_config {
+ u8 set_config;
+ u8 pack_enable;
+ u8 cycle_count;
+ u8 high_count;
+ u8 low_count;
+ u8 addr;
+ u8 stretch;
+ u16 clk_div;
+ u32 rx_len;
+ enum i2c_op op;
+ bool multi_msg;
+};
+
+#endif /* QCOM_GPI_DMA_H */