Merge tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the first and major pinctrl changes for the v3.8 merge
  cycle.  Some of this is used as merge base for other trees so I better
  be early on the trigger.

  As can be seen from the diffstat the major changes are:

  - A big conversion of the AT91 pinctrl driver and the associated ACKed
    platform changes under arch/arm/max-at91 and its device trees.  This
    has been coordinated with the AT91 maintainers to go in through the
    pinctrl tree.

  - A larger chunk of changes to the SPEAr drivers and the addition of
    the "plgpio" driver for the SPEAr as well.

  - The removal of the remnants of the Nomadik driver from the arch/arm
    tree and fusion of that into the Nomadik driver and platform data
    header files.

  - Some local movement in the Marvell MVEBU drivers, these now have
    their own subdirectory.

  - The addition of a chunk of code to gpiolib under drivers/gpio to
    register gpio-to-pin range mappings from the GPIO side of things.
    This has been requested by Grant Likely and is now implemented, it
    is particularly useful for device tree work.

  Then we have incremental updates all over the place, many of these are
  cleanups and fixes from Axel Lin who has done a great job of removing
  minor mistakes and compilation annoyances."

* tag 'pinctrl-for-v3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (114 commits)
  ARM: mmp: select PINCTRL for ARCH_MMP
  pinctrl: Drop selecting PINCONF for MMP2, PXA168 and PXA910
  pinctrl: pinctrl-single: Fix error check condition
  pinctrl: SPEAr: Update error check for unsigned variables
  gpiolib: Fix use after free in gpiochip_add_pin_range
  gpiolib: rename pin range arguments
  pinctrl: single: support gpio request and free
  pinctrl: generic: add input schmitt disable parameter
  pinctrl/u300/coh901: stop spawning pinctrl from GPIO
  pinctrl/u300/coh901: let the gpio_chip register the range
  pinctrl: add function to retrieve range from pin
  gpiolib: return any error code from range creation
  pinctrl: make range registration defer properly
  gpiolib: rename find_pinctrl_*
  gpiolib: let gpiochip_add_pin_range() specify offset
  ARM: at91: pm9g45: add mmc support
  ARM: at91: Animeo IP: add mmc support
  ARM: at91: dt: add mmc pinctrl for Atmel reference boards
  ARM: at91: dt: at91sam9: add mmc pinctrl support
  ARM: at91/dts: add nodes for atmel hsmci controllers for atmel boards
  ...

1 files changed, 3 insertions, 2 deletions

diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 4f0abb9f1c09..47a1bdd88878 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -46,11 +46,11 @@
  * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
  *	(open emitter). Sending this config will enabale open drain mode, the
  *	argument is ignored.
+ * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin.
  * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in
  *	schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis,
  *	the threshold value is given on a custom format as argument when
- *	setting pins to this mode. The argument zero turns the schmitt trigger
- *	off.
+ *	setting pins to this mode.
  * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode,
  *	which means it will wait for signals to settle when reading inputs. The
  *	argument gives the debounce time on a custom format. Setting the
@@ -74,6 +74,7 @@ enum pin_config_param {
 	PIN_CONFIG_DRIVE_PUSH_PULL,
 	PIN_CONFIG_DRIVE_OPEN_DRAIN,
 	PIN_CONFIG_DRIVE_OPEN_SOURCE,
+	PIN_CONFIG_INPUT_SCHMITT_DISABLE,
 	PIN_CONFIG_INPUT_SCHMITT,
 	PIN_CONFIG_INPUT_DEBOUNCE,
 	PIN_CONFIG_POWER_SOURCE,