summaryrefslogtreecommitdiff
path: root/include/linux/seqlock.h
diff options
context:
space:
mode:
authorAhmed S. Darwish <a.darwish@linutronix.de>2020-07-20 18:55:07 +0300
committerPeter Zijlstra <peterz@infradead.org>2020-07-29 17:14:22 +0300
commit0d24f65e933ca89d55d17f6dbdb2a72ca88f0992 (patch)
tree69b56e136fd1aba3f2b24db0116ba03c582ffdb1 /include/linux/seqlock.h
parentf05d67179def83545d257aaff40b974e5915af38 (diff)
downloadlinux-0d24f65e933ca89d55d17f6dbdb2a72ca88f0992.tar.xz
Documentation: locking: Describe seqlock design and usage
Proper documentation for the design and usage of sequence counters and sequential locks does not exist. Complete the seqlock.h documentation as follows: - Divide all documentation on a seqcount_t vs. seqlock_t basis. The description for both mechanisms was intermingled, which is incorrect since the usage constrains for each type are vastly different. - Add an introductory paragraph describing the internal design of, and rationale for, sequence counters. - Document seqcount_t writer non-preemptibility requirement, which was not previously documented anywhere, and provide a clear rationale. - Provide template code for seqcount_t and seqlock_t initialization and reader/writer critical sections. - Recommend using seqlock_t by default. It implicitly handles the serialization and non-preemptibility requirements of writers. At seqlock.h: - Remove references to brlocks as they've long been removed from the kernel. - Remove references to gcc-3.x since the kernel's minimum supported gcc version is 4.9. References: 0f6ed63b1707 ("no need to keep brlock macros anymore...") References: 6ec4476ac825 ("Raise gcc version requirement to 4.9") Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200720155530.1173732-2-a.darwish@linutronix.de
Diffstat (limited to 'include/linux/seqlock.h')
-rw-r--r--include/linux/seqlock.h85
1 files changed, 40 insertions, 45 deletions
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 8b97204f35a7..299d68f10325 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -1,36 +1,15 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_SEQLOCK_H
#define __LINUX_SEQLOCK_H
+
/*
- * Reader/writer consistent mechanism without starving writers. This type of
- * lock for data where the reader wants a consistent set of information
- * and is willing to retry if the information changes. There are two types
- * of readers:
- * 1. Sequence readers which never block a writer but they may have to retry
- * if a writer is in progress by detecting change in sequence number.
- * Writers do not wait for a sequence reader.
- * 2. Locking readers which will wait if a writer or another locking reader
- * is in progress. A locking reader in progress will also block a writer
- * from going forward. Unlike the regular rwlock, the read lock here is
- * exclusive so that only one locking reader can get it.
- *
- * This is not as cache friendly as brlock. Also, this may not work well
- * for data that contains pointers, because any writer could
- * invalidate a pointer that a reader was following.
- *
- * Expected non-blocking reader usage:
- * do {
- * seq = read_seqbegin(&foo);
- * ...
- * } while (read_seqretry(&foo, seq));
- *
- *
- * On non-SMP the spin locks disappear but the writer still needs
- * to increment the sequence variables because an interrupt routine could
- * change the state of the data.
- *
- * Based on x86_64 vsyscall gettimeofday
- * by Keith Owens and Andrea Arcangeli
+ * seqcount_t / seqlock_t - a reader-writer consistency mechanism with
+ * lockless readers (read-only retry loops), and no writer starvation.
+ *
+ * See Documentation/locking/seqlock.rst
+ *
+ * Copyrights:
+ * - Based on x86_64 vsyscall gettimeofday: Keith Owens, Andrea Arcangeli
*/
#include <linux/spinlock.h>
@@ -41,8 +20,8 @@
#include <asm/processor.h>
/*
- * The seqlock interface does not prescribe a precise sequence of read
- * begin/retry/end. For readers, typically there is a call to
+ * The seqlock seqcount_t interface does not prescribe a precise sequence of
+ * read begin/retry/end. For readers, typically there is a call to
* read_seqcount_begin() and read_seqcount_retry(), however, there are more
* esoteric cases which do not follow this pattern.
*
@@ -50,16 +29,30 @@
* via seqcount_t under KCSAN: upon beginning a seq-reader critical section,
* pessimistically mark the next KCSAN_SEQLOCK_REGION_MAX memory accesses as
* atomics; if there is a matching read_seqcount_retry() call, no following
- * memory operations are considered atomic. Usage of seqlocks via seqlock_t
- * interface is not affected.
+ * memory operations are considered atomic. Usage of the seqlock_t interface
+ * is not affected.
*/
#define KCSAN_SEQLOCK_REGION_MAX 1000
/*
- * Version using sequence counter only.
- * This can be used when code has its own mutex protecting the
- * updating starting before the write_seqcountbeqin() and ending
- * after the write_seqcount_end().
+ * Sequence counters (seqcount_t)
+ *
+ * This is the raw counting mechanism, without any writer protection.
+ *
+ * Write side critical sections must be serialized and non-preemptible.
+ *
+ * If readers can be invoked from hardirq or softirq contexts,
+ * interrupts or bottom halves must also be respectively disabled before
+ * entering the write section.
+ *
+ * This mechanism can't be used if the protected data contains pointers,
+ * as the writer can invalidate a pointer that a reader is following.
+ *
+ * If it's desired to automatically handle the sequence counter writer
+ * serialization and non-preemptibility requirements, use a sequential
+ * lock (seqlock_t) instead.
+ *
+ * See Documentation/locking/seqlock.rst
*/
typedef struct seqcount {
unsigned sequence;
@@ -398,10 +391,6 @@ static inline void raw_write_seqcount_latch(seqcount_t *s)
smp_wmb(); /* increment "sequence" before following stores */
}
-/*
- * Sequence counter only version assumes that callers are using their
- * own mutexing.
- */
static inline void write_seqcount_begin_nested(seqcount_t *s, int subclass)
{
raw_write_seqcount_begin(s);
@@ -434,15 +423,21 @@ static inline void write_seqcount_invalidate(seqcount_t *s)
kcsan_nestable_atomic_end();
}
+/*
+ * Sequential locks (seqlock_t)
+ *
+ * Sequence counters with an embedded spinlock for writer serialization
+ * and non-preemptibility.
+ *
+ * For more info, see:
+ * - Comments on top of seqcount_t
+ * - Documentation/locking/seqlock.rst
+ */
typedef struct {
struct seqcount seqcount;
spinlock_t lock;
} seqlock_t;
-/*
- * These macros triggered gcc-3.x compile-time problems. We think these are
- * OK now. Be cautious.
- */
#define __SEQLOCK_UNLOCKED(lockname) \
{ \
.seqcount = SEQCNT_ZERO(lockname), \