Merge tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This is quite a quiet release for SPI, there's been a bit of cleanup
  to the core from Uwe but nothing functionality wise.

  We have added several new drivers, Cadence XSPI, Ingenic JZ47xx,
  Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI"

* tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits)
  spi: Convert NXP flexspi to json schema
  spi: spi-geni-qcom: Add support for GPI dma
  spi: fsi: Fix contention in the FSI2SPI engine
  spi: spi-rpc-if: Check return value of rpcif_sw_init()
  spi: tegra210-quad: Put device into suspend on driver removal
  spi: tegra20-slink: Put device into suspend on driver removal
  spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
  spi: at91-usart: replacing legacy gpio interface for gpiod
  spi: replace snprintf in show functions with sysfs_emit
  spi: cadence: Add of_node_put() before return
  spi: orion: Add of_node_put() before goto
  spi: cadence-quadspi: fix dma_unmap_single() call
  spi: tegra20: fix build with CONFIG_PM_SLEEP=n
  spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
  spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
  spi: Make several public functions private to spi.c
  spi: Reorder functions to simplify the next commit
  spi: Remove unused function spi_busnum_to_master()
  spi: Move comment about chipselect check to the right place
  spi: fsi: Print status on error
  ...

2 files changed, 12 insertions, 55 deletions

diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 56b426fe020c..4c70a6e2141e 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -123,6 +123,7 @@ enum pm_ioctl_id {
 	IOCTL_READ_PGGS = 15,
 	/* Set healthy bit value */
 	IOCTL_SET_BOOT_HEALTH_STATUS = 17,
+	IOCTL_OSPI_MUX_SELECT = 21,
 };
 
 enum pm_query_id {
@@ -351,6 +352,11 @@ enum zynqmp_pm_shutdown_subtype {
 	ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM = 2,
 };
 
+enum ospi_mux_select_type {
+	PM_OSPI_MUX_SEL_DMA = 0,
+	PM_OSPI_MUX_SEL_LINEAR = 1,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
@@ -387,6 +393,7 @@ int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data);
 int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data);
 int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value);
 int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type);
+int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select);
 int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
 			   const enum zynqmp_pm_reset_action assert_flag);
 int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status);
@@ -508,6 +515,11 @@ static inline int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
 	return -ENODEV;
 }
 
+static inline int zynqmp_pm_ospi_mux_select(u32 dev_id, u32 select)
+{
+	return -ENODEV;
+}
+
 static inline int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
 					 const enum zynqmp_pm_reset_action assert_flag)
 {
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 6b0b686f6f90..eb7ac8a1e03c 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -78,10 +78,6 @@ struct spi_statistics {
 	unsigned long transfers_split_maxsize;
 };
 
-void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
-				       struct spi_transfer *xfer,
-				       struct spi_controller *ctlr);
-
 #define SPI_STATISTICS_ADD_TO_FIELD(stats, field, count)	\
 	do {							\
 		unsigned long flags;				\
@@ -763,8 +759,6 @@ extern int devm_spi_register_controller(struct device *dev,
 					struct spi_controller *ctlr);
 extern void spi_unregister_controller(struct spi_controller *ctlr);
 
-extern struct spi_controller *spi_busnum_to_master(u16 busnum);
-
 /*
  * SPI resource management while processing a SPI message
  */
@@ -788,15 +782,6 @@ struct spi_res {
 	unsigned long long      data[]; /* guarantee ull alignment */
 };
 
-extern void *spi_res_alloc(struct spi_device *spi,
-			   spi_res_release_t release,
-			   size_t size, gfp_t gfp);
-extern void spi_res_add(struct spi_message *message, void *res);
-extern void spi_res_free(void *res);
-
-extern void spi_res_release(struct spi_controller *ctlr,
-			    struct spi_message *message);
-
 /*---------------------------------------------------------------------------*/
 
 /*
@@ -1114,8 +1099,6 @@ static inline void spi_message_free(struct spi_message *m)
 
 extern int spi_setup(struct spi_device *spi);
 extern int spi_async(struct spi_device *spi, struct spi_message *message);
-extern int spi_async_locked(struct spi_device *spi,
-			    struct spi_message *message);
 extern int spi_slave_abort(struct spi_device *spi);
 
 static inline size_t
@@ -1198,15 +1181,6 @@ struct spi_replaced_transfers {
 	struct spi_transfer inserted_transfers[];
 };
 
-extern struct spi_replaced_transfers *spi_replace_transfers(
-	struct spi_message *msg,
-	struct spi_transfer *xfer_first,
-	size_t remove,
-	size_t insert,
-	spi_replaced_release_t release,
-	size_t extradatasize,
-	gfp_t gfp);
-
 /*---------------------------------------------------------------------------*/
 
 /* SPI transfer transformation methods */
@@ -1478,20 +1452,8 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_controller().
- *
- * You can also use spi_alloc_device() and spi_add_device() to use a two
- * stage registration sequence for each spi_device.  This gives the caller
- * some more control over the spi_device structure before it is registered,
- * but requires that caller to initialize fields that would otherwise
- * be defined using the board info.
  */
 extern struct spi_device *
-spi_alloc_device(struct spi_controller *ctlr);
-
-extern int
-spi_add_device(struct spi_device *spi);
-
-extern struct spi_device *
 spi_new_device(struct spi_controller *, struct spi_board_info *);
 
 extern void spi_unregister_device(struct spi_device *spi);
@@ -1505,23 +1467,6 @@ spi_transfer_is_last(struct spi_controller *ctlr, struct spi_transfer *xfer)
 	return list_is_last(&xfer->transfer_list, &ctlr->cur_msg->transfers);
 }
 
-/* OF support code */
-#if IS_ENABLED(CONFIG_OF)
-
-/* must call put_device() when done with returned spi_device device */
-extern struct spi_device *
-of_find_spi_device_by_node(struct device_node *node);
-
-#else
-
-static inline struct spi_device *
-of_find_spi_device_by_node(struct device_node *node)
-{
-	return NULL;
-}
-
-#endif /* IS_ENABLED(CONFIG_OF) */
-
 /* Compatibility layer */
 #define spi_master			spi_controller