diff options
author | Russell King <rmk+kernel@armlinux.org.uk> | 2019-12-11 13:56:09 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2019-12-11 22:53:41 +0300 |
commit | 74c551ca5a0edcc9cf66a3b73fd95b9a8615bfd0 (patch) | |
tree | 8d40d72ad4c72c8a37a998fb27085363f5b6b967 /include/linux | |
parent | 0fbd26a9fb6875b98fcfff523831fec47bc5e9a2 (diff) | |
download | linux-74c551ca5a0edcc9cf66a3b73fd95b9a8615bfd0.tar.xz |
net: sfp: add module start/stop upstream notifications
When dealing with some copper modules, we can't positively know the
module capabilities are until we have probed the PHY. Without the full
capabilities, we may end up failing a module that we could otherwise
drive with a restricted set of capabilities.
An example of this would be a module with a NBASE-T PHY plugged into
a host that supports phy interface modes 2500BASE-X and SGMII. The
PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes,
which means a subset of the capabilities are compatible with the host.
However, reading the module EEPROM leads us to believe that the module
only supports ethtool link mode 10GBASE-T, which is incompatible with
the host - and thus results in the module being rejected.
This patch adds an extra notification which are triggered after the
SFP module's PHY probe, and a corresponding notification just before
the PHY is removed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/sfp.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/include/linux/sfp.h b/include/linux/sfp.h index 373d8b67ea86..66a56396e8e3 100644 --- a/include/linux/sfp.h +++ b/include/linux/sfp.h @@ -507,6 +507,8 @@ struct sfp_bus; * @module_insert: called after a module has been detected to determine * whether the module is supported for the upstream device. * @module_remove: called after the module has been removed. + * @module_start: called after the PHY probe step + * @module_stop: called before the PHY is removed * @link_down: called when the link is non-operational for whatever * reason. * @link_up: called when the link is operational. @@ -520,6 +522,8 @@ struct sfp_upstream_ops { void (*detach)(void *priv, struct sfp_bus *bus); int (*module_insert)(void *priv, const struct sfp_eeprom_id *id); void (*module_remove)(void *priv); + int (*module_start)(void *priv); + void (*module_stop)(void *priv); void (*link_down)(void *priv); void (*link_up)(void *priv); int (*connect_phy)(void *priv, struct phy_device *); |