Kalle Valo says:

====================
pull-request: wireless-next-2022-10-28

First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.

Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/

mac80211
 - preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
 - add API to show the link STAs in debugfs
 - all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)

rtw89
 - support 8852BE

rtl8xxxu
 - support RTL8188FU

brmfmac
 - support two station interfaces concurrently

bcma
 - support SPROM rev 11
====================

Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 66 insertions, 20 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e09ff87146c1..11a370e64143 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2105,6 +2105,7 @@ struct mpath_info {
  *
  * Used to change BSS parameters (mainly for AP mode).
  *
+ * @link_id: link_id or -1 for non-MLD
  * @use_cts_prot: Whether to use CTS protection
  *	(0 = no, 1 = yes, -1 = do not change)
  * @use_short_preamble: Whether the use of short preambles is allowed
@@ -2122,6 +2123,7 @@ struct mpath_info {
  * @p2p_opp_ps: P2P opportunistic PS (-1 = no change)
  */
 struct bss_parameters {
+	int link_id;
 	int use_cts_prot;
 	int use_short_preamble;
 	int use_short_slot_time;
@@ -6933,6 +6935,8 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
  * @ap_mld_addr: AP MLD address (in case of MLO)
  * @links: per-link information indexed by link ID, use links[0] for
  *	non-MLO connections
+ * @links.status: Set this (along with a BSS pointer) for links that
+ *	were rejected by the AP.
  */
 struct cfg80211_rx_assoc_resp {
 	const u8 *buf;
@@ -6944,6 +6948,7 @@ struct cfg80211_rx_assoc_resp {
 	struct {
 		const u8 *addr;
 		struct cfg80211_bss *bss;
+		u16 status;
 	} links[IEEE80211_MLD_MAX_NUM_LINKS];
 };
 
@@ -7454,6 +7459,9 @@ struct cfg80211_fils_resp_params {
  *	if the bss is expired during the connection, esp. for those drivers
  *	implementing connect op. Only one parameter among @bssid and @bss needs
  *	to be specified.
+ * @links.status: per-link status code, to report a status code that's not
+ *	%WLAN_STATUS_SUCCESS for a given link, it must also be in the
+ *	@valid_links bitmap and may have a BSS pointer (which is then released)
  */
 struct cfg80211_connect_resp_params {
 	int status;
@@ -7470,6 +7478,7 @@ struct cfg80211_connect_resp_params {
 		const u8 *addr;
 		const u8 *bssid;
 		struct cfg80211_bss *bss;
+		u16 status;
 	} links[IEEE80211_MLD_MAX_NUM_LINKS];
 };
 
@@ -7674,6 +7683,8 @@ void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
  *
  * @dev: network device
  * @bssid: the BSSID of the AP
+ * @td_bitmap: transition disable policy
+ * @td_bitmap_len: Length of transition disable policy
  * @gfp: allocation flags
  *
  * This function should be called by a driver that supports 4 way handshake
@@ -7684,7 +7695,7 @@ void cfg80211_roamed(struct net_device *dev, struct cfg80211_roam_info *info,
  * indicate the 802.11 association.
  */
 void cfg80211_port_authorized(struct net_device *dev, const u8 *bssid,
-			      gfp_t gfp);
+			      const u8* td_bitmap, u8 td_bitmap_len, gfp_t gfp);
 
 /**
  * cfg80211_disconnected - notify cfg80211 that connection was dropped
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ac2bad57933f..721c450a9ccd 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -89,15 +89,13 @@
 /**
  * DOC: mac80211 software tx queueing
  *
- * mac80211 provides an optional intermediate queueing implementation designed
- * to allow the driver to keep hardware queues short and provide some fairness
- * between different stations/interfaces.
- * In this model, the driver pulls data frames from the mac80211 queue instead
- * of letting mac80211 push them via drv_tx().
- * Other frames (e.g. control or management) are still pushed using drv_tx().
+ * mac80211 uses an intermediate queueing implementation, designed to allow the
+ * driver to keep hardware queues short and to provide some fairness between
+ * different stations/interfaces.
  *
- * Drivers indicate that they use this model by implementing the .wake_tx_queue
- * driver operation.
+ * Drivers must provide the .wake_tx_queue driver operation by either
+ * linking it to ieee80211_handle_wake_tx_queue() or implementing a custom
+ * handler.
  *
  * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with
  * another per-sta for non-data/non-mgmt and bufferable management frames, and
@@ -106,9 +104,12 @@
  * The driver is expected to initialize its private per-queue data for stations
  * and interfaces in the .add_interface and .sta_add ops.
  *
- * The driver can't access the queue directly. To dequeue a frame from a
- * txq, it calls ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a
- * queue, it calls the .wake_tx_queue driver op.
+ * The driver can't access the internal TX queues (iTXQs) directly.
+ * Whenever mac80211 adds a new frame to a queue, it calls the .wake_tx_queue
+ * driver op.
+ * Drivers implementing a custom .wake_tx_queue op can get them by calling
+ * ieee80211_tx_dequeue(). Drivers using ieee80211_handle_wake_tx_queue() will
+ * simply get the individual frames pushed via the .tx driver operation.
  *
  * Drivers can optionally delegate responsibility for scheduling queues to
  * mac80211, to take advantage of airtime fairness accounting. In this case, to
@@ -1826,7 +1827,7 @@ struct ieee80211_vif_cfg {
  *	for this interface.
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void \*).
- * @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
+ * @txq: the multicast data TX queue
  * @txqs_stopped: per AC flag to indicate that intermediate TXQs are stopped,
  *	protected by fq->lock.
  * @offload_flags: 802.3 -> 802.11 enapsulation offload flags, see
@@ -1915,6 +1916,10 @@ static inline bool lockdep_vif_mutex_held(struct ieee80211_vif *vif)
 	rcu_dereference_protected((vif)->link_conf[link_id],	\
 				  lockdep_vif_mutex_held(vif))
 
+#define link_conf_dereference_check(vif, link_id)		\
+	rcu_dereference_check((vif)->link_conf[link_id],	\
+			      lockdep_vif_mutex_held(vif))
+
 /**
  * enum ieee80211_key_flags - key flags
  *
@@ -2176,6 +2181,7 @@ struct ieee80211_sta_aggregates {
  * All link specific info for a STA link for a non MLD STA(single)
  * or a MLD STA(multiple entries) are stored here.
  *
+ * @sta: reference to owning STA
  * @addr: MAC address of the Link STA. For non-MLO STA this is same as the addr
  *	in ieee80211_sta. For MLO Link STA this addr can be same or different
  *	from addr in ieee80211_sta (representing MLD STA addr)
@@ -2196,6 +2202,8 @@ struct ieee80211_sta_aggregates {
  *
  */
 struct ieee80211_link_sta {
+	struct ieee80211_sta *sta;
+
 	u8 addr[ETH_ALEN];
 	u8 link_id;
 	enum ieee80211_smps_mode smps_mode;
@@ -2252,8 +2260,8 @@ struct ieee80211_link_sta {
  *	For non MLO STA it will point to the deflink data. For MLO STA
  *	ieee80211_sta_recalc_aggregates() must be called to update it.
  * @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not.
- * @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
- *	the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
+ * @txq: per-TID data TX queues; note that the last entry (%IEEE80211_NUM_TIDS)
+ *	is used for non-data frames
  * @deflink: This holds the default link STA information, for non MLO STA all link
  *	specific STA information is accessed through @deflink or through
  *	link[0] which points to address of @deflink. For MLO Link STA
@@ -2308,6 +2316,10 @@ static inline bool lockdep_sta_mutex_held(struct ieee80211_sta *pubsta)
 	rcu_dereference_protected((sta)->link[link_id],		\
 				  lockdep_sta_mutex_held(sta))
 
+#define link_sta_dereference_check(sta, link_id)		\
+	rcu_dereference_check((sta)->link[link_id],		\
+			      lockdep_sta_mutex_held(sta))
+
 #define for_each_sta_active_link(vif, sta, link_sta, link_id)			\
 	for (link_id = 0; link_id < ARRAY_SIZE((sta)->link); link_id++)		\
 		if ((!(vif)->active_links ||					\
@@ -3787,6 +3799,13 @@ struct ieee80211_prep_tx_info {
  *	should be within a CONFIG_MAC80211_DEBUGFS conditional. This
  *	callback can sleep.
  *
+ * @link_sta_add_debugfs: Drivers can use this callback to add debugfs files
+ *	when a link is added to a mac80211 station. This callback
+ *	should be within a CPTCFG_MAC80211_DEBUGFS conditional. This
+ *	callback can sleep.
+ *	For non-MLO the callback will be called once for the deflink with the
+ *	station's directory rather than a separate subdirectory.
+ *
  * @sta_notify: Notifies low level driver about power state transition of an
  *	associated station, AP,  IBSS/WDS/mesh peer etc. For a VIF operating
  *	in AP mode, this callback will not be called when the flag
@@ -4257,6 +4276,10 @@ struct ieee80211_ops {
 				struct ieee80211_vif *vif,
 				struct ieee80211_sta *sta,
 				struct dentry *dir);
+	void (*link_sta_add_debugfs)(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_link_sta *link_sta,
+				     struct dentry *dir);
 #endif
 	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			enum sta_notify_cmd, struct ieee80211_sta *sta);
@@ -5691,7 +5714,7 @@ void ieee80211_key_replay(struct ieee80211_key_conf *keyconf);
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  * @queue: queue number (counted from zero).
  *
- * Drivers should use this function instead of netif_wake_queue.
+ * Drivers must use this function instead of netif_wake_queue.
  */
 void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue);
 
@@ -5700,7 +5723,7 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue);
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  * @queue: queue number (counted from zero).
  *
- * Drivers should use this function instead of netif_stop_queue.
+ * Drivers must use this function instead of netif_stop_queue.
  */
 void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
 
@@ -5709,7 +5732,7 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  * @queue: queue number (counted from zero).
  *
- * Drivers should use this function instead of netif_stop_queue.
+ * Drivers must use this function instead of netif_queue_stopped.
  *
  * Return: %true if the queue is stopped. %false otherwise.
  */
@@ -5720,7 +5743,7 @@ int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
  * ieee80211_stop_queues - stop all queues
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  *
- * Drivers should use this function instead of netif_stop_queue.
+ * Drivers must use this function instead of netif_tx_stop_all_queues.
  */
 void ieee80211_stop_queues(struct ieee80211_hw *hw);
 
@@ -5728,7 +5751,7 @@ void ieee80211_stop_queues(struct ieee80211_hw *hw);
  * ieee80211_wake_queues - wake all queues
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  *
- * Drivers should use this function instead of netif_wake_queue.
+ * Drivers must use this function instead of netif_tx_wake_all_queues.
  */
 void ieee80211_wake_queues(struct ieee80211_hw *hw);
 
@@ -6950,6 +6973,18 @@ static inline struct sk_buff *ieee80211_tx_dequeue_ni(struct ieee80211_hw *hw,
 }
 
 /**
+ * ieee80211_handle_wake_tx_queue - mac80211 handler for wake_tx_queue callback
+ *
+ * @hw: pointer as obtained from wake_tx_queue() callback().
+ * @txq: pointer as obtained from wake_tx_queue() callback().
+ *
+ * Drivers can use this function for the mandatory mac80211 wake_tx_queue
+ * callback in struct ieee80211_ops. They should not call this function.
+ */
+void ieee80211_handle_wake_tx_queue(struct ieee80211_hw *hw,
+				    struct ieee80211_txq *txq);
+
+/**
  * ieee80211_next_txq - get next tx queue to pull packets from
  *
  * @hw: pointer as obtained from ieee80211_alloc_hw()