diff options
author | John W. Linville <linville@tuxdriver.com> | 2014-11-21 00:09:30 +0300 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2014-11-21 00:09:30 +0300 |
commit | 9a638ddfb09e5aa17158842c95526e1aa79f92e6 (patch) | |
tree | 7edf2e128b23f711cf28273dca3ff69f3706925a /include/net | |
parent | b4c1b70823721e9edb19a839188e4dae50ce878d (diff) | |
parent | 75769c80e381653994293b5aa5a8cfec50088f9f (diff) | |
download | linux-9a638ddfb09e5aa17158842c95526e1aa79f92e6.tar.xz |
Merge tag 'mac80211-next-for-john-2014-11-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg <johannes@sipsolutions.net> says:
"It has been a while since my last pull request, so we accumulated
another relatively large set of changes:
* TDLS off-channel support set from Arik/Liad, with some support
patches I did
* custom regulatory fixes from Arik
* minstrel VHT fix (and a small optimisation) from Felix
* add back radiotap vendor namespace support (myself)
* random MAC address scanning for cfg80211/mac80211/hwsim (myself)
* CSA improvements (Luca)
* WoWLAN Net Detect (wake on network found) support (Luca)
* and lots of other smaller changes from many people"
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'include/net')
-rw-r--r-- | include/net/cfg80211.h | 94 | ||||
-rw-r--r-- | include/net/mac80211.h | 149 |
2 files changed, 238 insertions, 5 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5c3acd07acd9..bb748c4da5af 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1437,6 +1437,10 @@ struct cfg80211_ssid { * @aborted: (internal) scan request was notified as aborted * @notified: (internal) scan request was notified as done or aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band + * @mac_addr: MAC address used with randomisation + * @mac_addr_mask: MAC address mask used with randomisation, bits that + * are 0 in the mask should be randomised, bits that are 1 should + * be taken from the @mac_addr */ struct cfg80211_scan_request { struct cfg80211_ssid *ssids; @@ -1451,6 +1455,9 @@ struct cfg80211_scan_request { struct wireless_dev *wdev; + u8 mac_addr[ETH_ALEN] __aligned(2); + u8 mac_addr_mask[ETH_ALEN] __aligned(2); + /* internal */ struct wiphy *wiphy; unsigned long scan_start; @@ -1461,6 +1468,17 @@ struct cfg80211_scan_request { struct ieee80211_channel *channels[0]; }; +static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask) +{ + int i; + + get_random_bytes(buf, ETH_ALEN); + for (i = 0; i < ETH_ALEN; i++) { + buf[i] &= ~mask[i]; + buf[i] |= addr[i] & mask[i]; + } +} + /** * struct cfg80211_match_set - sets of attributes to match * @@ -1494,6 +1512,10 @@ struct cfg80211_match_set { * @channels: channels to scan * @min_rssi_thold: for drivers only supporting a single threshold, this * contains the minimum over all matchsets + * @mac_addr: MAC address used with randomisation + * @mac_addr_mask: MAC address mask used with randomisation, bits that + * are 0 in the mask should be randomised, bits that are 1 should + * be taken from the @mac_addr */ struct cfg80211_sched_scan_request { struct cfg80211_ssid *ssids; @@ -1508,6 +1530,9 @@ struct cfg80211_sched_scan_request { int n_match_sets; s32 min_rssi_thold; + u8 mac_addr[ETH_ALEN] __aligned(2); + u8 mac_addr_mask[ETH_ALEN] __aligned(2); + /* internal */ struct wiphy *wiphy; struct net_device *dev; @@ -1940,6 +1965,7 @@ struct cfg80211_wowlan_tcp { * @rfkill_release: wake up when rfkill is released * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. * NULL if not configured. + * @nd_config: configuration for the scan to be used for net detect wake. */ struct cfg80211_wowlan { bool any, disconnect, magic_pkt, gtk_rekey_failure, @@ -1948,6 +1974,7 @@ struct cfg80211_wowlan { struct cfg80211_pkt_pattern *patterns; struct cfg80211_wowlan_tcp *tcp; int n_patterns; + struct cfg80211_sched_scan_request *nd_config; }; /** @@ -1980,6 +2007,35 @@ struct cfg80211_coalesce { }; /** + * struct cfg80211_wowlan_nd_match - information about the match + * + * @ssid: SSID of the match that triggered the wake up + * @n_channels: Number of channels where the match occurred. This + * value may be zero if the driver can't report the channels. + * @channels: center frequencies of the channels where a match + * occurred (in MHz) + */ +struct cfg80211_wowlan_nd_match { + struct cfg80211_ssid ssid; + int n_channels; + u32 channels[]; +}; + +/** + * struct cfg80211_wowlan_nd_info - net detect wake up information + * + * @n_matches: Number of match information instances provided in + * @matches. This value may be zero if the driver can't provide + * match information. + * @matches: Array of pointers to matches containing information about + * the matches that triggered the wake up. + */ +struct cfg80211_wowlan_nd_info { + int n_matches; + struct cfg80211_wowlan_nd_match *matches[]; +}; + +/** * struct cfg80211_wowlan_wakeup - wakeup report * @disconnect: woke up by getting disconnected * @magic_pkt: woke up by receiving magic packet @@ -1998,6 +2054,7 @@ struct cfg80211_coalesce { * @tcp_match: TCP wakeup packet received * @tcp_connlost: TCP connection lost or failed to establish * @tcp_nomoretokens: TCP data ran out of tokens + * @net_detect: if not %NULL, woke up because of net detect */ struct cfg80211_wowlan_wakeup { bool disconnect, magic_pkt, gtk_rekey_failure, @@ -2007,6 +2064,7 @@ struct cfg80211_wowlan_wakeup { s32 pattern_idx; u32 packet_present_len, packet_len; const void *packet; + struct cfg80211_wowlan_nd_info *net_detect; }; /** @@ -2367,6 +2425,12 @@ struct cfg80211_qos_map { * (invoked with the wireless_dev mutex held) * @leave_ocb: leave the current OCB network * (invoked with the wireless_dev mutex held) + * + * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver + * is responsible for continually initiating channel-switching operations + * and returning to the base channel for communication with the AP. + * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both + * peers must be on the base channel when the call completes. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2622,6 +2686,14 @@ struct cfg80211_ops { u16 admitted_time); int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev, u8 tsid, const u8 *peer); + + int (*tdls_channel_switch)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *addr, u8 oper_class, + struct cfg80211_chan_def *chandef); + void (*tdls_cancel_channel_switch)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *addr); }; /* @@ -2796,6 +2868,7 @@ struct ieee80211_txrx_stypes { * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release + * @WIPHY_WOWLAN_NET_DETECT: supports wakeup on network detection */ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_ANY = BIT(0), @@ -2806,6 +2879,7 @@ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5), WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6), WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), + WIPHY_WOWLAN_NET_DETECT = BIT(8), }; struct wiphy_wowlan_tcp_support { @@ -2824,6 +2898,11 @@ struct wiphy_wowlan_tcp_support { * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern * @max_pkt_offset: maximum Rx packet offset + * @max_nd_match_sets: maximum number of matchsets for net-detect, + * similar, but not necessarily identical, to max_match_sets for + * scheduled scans. + * See &struct cfg80211_sched_scan_request.@match_sets for more + * details. * @tcp: TCP wakeup support information */ struct wiphy_wowlan_support { @@ -2832,6 +2911,7 @@ struct wiphy_wowlan_support { int pattern_max_len; int pattern_min_len; int max_pkt_offset; + int max_nd_match_sets; const struct wiphy_wowlan_tcp_support *tcp; }; @@ -4719,6 +4799,20 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, void cfg80211_ch_switch_notify(struct net_device *dev, struct cfg80211_chan_def *chandef); +/* + * cfg80211_ch_switch_started_notify - notify channel switch start + * @dev: the device on which the channel switch started + * @chandef: the future channel definition + * @count: the number of TBTTs until the channel switch happens + * + * Inform the userspace about the channel switch that has just + * started, so that it can take appropriate actions (eg. starting + * channel switch on other vifs), if necessary. + */ +void cfg80211_ch_switch_started_notify(struct net_device *dev, + struct cfg80211_chan_def *chandef, + u8 count); + /** * ieee80211_operating_class_to_band - convert operating class to band * diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5f203a6a5e7e..cff3a26a9dae 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -882,6 +882,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * subframes share the same sequence number. Reported subframes can be * either regular MSDU or singly A-MSDUs. Subframes must not be * interleaved with other frames. + * @RX_FLAG_RADIOTAP_VENDOR_DATA: This frame contains vendor-specific + * radiotap data in the skb->data (before the frame) as described by + * the &struct ieee80211_vendor_radiotap. */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = BIT(0), @@ -911,6 +914,7 @@ enum mac80211_rx_flags { RX_FLAG_10MHZ = BIT(28), RX_FLAG_5MHZ = BIT(29), RX_FLAG_AMSDU_MORE = BIT(30), + RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(31), }; #define RX_FLAG_STBC_SHIFT 26 @@ -982,6 +986,39 @@ struct ieee80211_rx_status { }; /** + * struct ieee80211_vendor_radiotap - vendor radiotap data information + * @present: presence bitmap for this vendor namespace + * (this could be extended in the future if any vendor needs more + * bits, the radiotap spec does allow for that) + * @align: radiotap vendor namespace alignment. This defines the needed + * alignment for the @data field below, not for the vendor namespace + * description itself (which has a fixed 2-byte alignment) + * Must be a power of two, and be set to at least 1! + * @oui: radiotap vendor namespace OUI + * @subns: radiotap vendor sub namespace + * @len: radiotap vendor sub namespace skip length, if alignment is done + * then that's added to this, i.e. this is only the length of the + * @data field. + * @pad: number of bytes of padding after the @data, this exists so that + * the skb data alignment can be preserved even if the data has odd + * length + * @data: the actual vendor namespace data + * + * This struct, including the vendor data, goes into the skb->data before + * the 802.11 header. It's split up in mac80211 using the align/oui/subns + * data. + */ +struct ieee80211_vendor_radiotap { + u32 present; + u8 align; + u8 oui[3]; + u8 subns; + u8 pad; + u16 len; + u8 data[]; +} __packed; + +/** * enum ieee80211_conf_flags - configuration flags * * Flags to define PHY configuration options @@ -1790,6 +1827,31 @@ struct ieee80211_scan_request { }; /** + * struct ieee80211_tdls_ch_sw_params - TDLS channel switch parameters + * + * @sta: peer this TDLS channel-switch request/response came from + * @chandef: channel referenced in a TDLS channel-switch request + * @action_code: see &enum ieee80211_tdls_actioncode + * @status: channel-switch response status + * @timestamp: time at which the frame was received + * @switch_time: switch-timing parameter received in the frame + * @switch_timeout: switch-timing parameter received in the frame + * @tmpl_skb: TDLS switch-channel response template + * @ch_sw_tm_ie: offset of the channel-switch timing IE inside @tmpl_skb + */ +struct ieee80211_tdls_ch_sw_params { + struct ieee80211_sta *sta; + struct cfg80211_chan_def *chandef; + u8 action_code; + u32 status; + u32 timestamp; + u16 switch_time; + u16 switch_timeout; + struct sk_buff *tmpl_skb; + u32 ch_sw_tm_ie; +}; + +/** * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy * * @wiphy: the &struct wiphy which we want to query @@ -2560,7 +2622,9 @@ enum ieee80211_reconfig_type { * * @sw_scan_start: Notifier function that is called just before a software scan * is started. Can be NULL, if the driver doesn't need this notification. - * The callback can sleep. + * The mac_addr parameter allows supporting NL80211_SCAN_FLAG_RANDOM_ADDR, + * the driver may set the NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR flag if it + * can use this parameter. The callback can sleep. * * @sw_scan_complete: Notifier function that is called just after a * software scan finished. Can be NULL, if the driver doesn't need @@ -2631,6 +2695,9 @@ enum ieee80211_reconfig_type { * uses hardware rate control (%IEEE80211_HW_HAS_RATE_CONTROL) since * otherwise the rate control algorithm is notified directly. * Must be atomic. + * @sta_rate_tbl_update: Notifies the driver that the rate table changed. This + * is only used if the configured rate control algorithm actually uses + * the new rate table API, and is therefore optional. Must be atomic. * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. @@ -2878,6 +2945,23 @@ enum ieee80211_reconfig_type { * * @get_txpower: get current maximum tx power (in dBm) based on configuration * and hardware limits. + * + * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver + * is responsible for continually initiating channel-switching operations + * and returning to the base channel for communication with the AP. The + * driver receives a channel-switch request template and the location of + * the switch-timing IE within the template as part of the invocation. + * The template is valid only within the call, and the driver can + * optionally copy the skb for further re-use. + * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both + * peers must be on the base channel when the call completes. + * @tdls_recv_channel_switch: a TDLS channel-switch related frame (request or + * response) has been received from a remote peer. The driver gets + * parameters parsed from the incoming frame and may use them to continue + * an ongoing channel-switch operation. In addition, a channel-switch + * response template is provided, together with the location of the + * switch-timing IE within the template. The skb can only be used within + * the function call. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2937,8 +3021,11 @@ struct ieee80211_ops { struct ieee80211_scan_ies *ies); int (*sched_scan_stop)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); - void (*sw_scan_start)(struct ieee80211_hw *hw); - void (*sw_scan_complete)(struct ieee80211_hw *hw); + void (*sw_scan_start)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *mac_addr); + void (*sw_scan_complete)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); int (*get_stats)(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx, @@ -2972,6 +3059,9 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, u32 changed); + void (*sta_rate_tbl_update)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); int (*conf_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 ac, const struct ieee80211_tx_queue_params *params); @@ -3089,6 +3179,18 @@ struct ieee80211_ops { u32 (*get_expected_throughput)(struct ieee80211_sta *sta); int (*get_txpower)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int *dbm); + + int (*tdls_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u8 oper_class, + struct cfg80211_chan_def *chandef, + struct sk_buff *tmpl_skb, u32 ch_sw_tm_ie); + void (*tdls_cancel_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); + void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_tdls_ch_sw_params *params); }; /** @@ -3729,7 +3831,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, /** * ieee80211_probereq_get - retrieve a Probe Request template * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @src_addr: source MAC address * @ssid: SSID buffer * @ssid_len: length of SSID * @tailroom: tailroom to reserve at end of SKB for IEs @@ -3740,7 +3842,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, * Return: The Probe Request template. %NULL on error. */ struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, + const u8 *src_addr, const u8 *ssid, size_t ssid_len, size_t tailroom); @@ -4980,6 +5082,43 @@ void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer, u16 reason_code, gfp_t gfp); /** + * ieee80211_reserve_tid - request to reserve a specific TID + * + * There is sometimes a need (such as in TDLS) for blocking the driver from + * using a specific TID so that the FW can use it for certain operations such + * as sending PTI requests. To make sure that the driver doesn't use that TID, + * this function must be called as it flushes out packets on this TID and marks + * it as blocked, so that any transmit for the station on this TID will be + * redirected to the alternative TID in the same AC. + * + * Note that this function blocks and may call back into the driver, so it + * should be called without driver locks held. Also note this function should + * only be called from the driver's @sta_state callback. + * + * @sta: the station to reserve the TID for + * @tid: the TID to reserve + * + * Returns: 0 on success, else on failure + */ +int ieee80211_reserve_tid(struct ieee80211_sta *sta, u8 tid); + +/** + * ieee80211_unreserve_tid - request to unreserve a specific TID + * + * Once there is no longer any need for reserving a certain TID, this function + * should be called, and no longer will packets have their TID modified for + * preventing use of this TID in the driver. + * + * Note that this function blocks and acquires a lock, so it should be called + * without driver locks held. Also note this function should only be called + * from the driver's @sta_state callback. + * + * @sta: the station + * @tid: the TID to unreserve + */ +void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid); + +/** * ieee80211_ie_split - split an IE buffer according to ordering * * @ies: the IE buffer |