diff options
author | Sean Anderson <sean.anderson@seco.com> | 2022-09-21 01:12:31 +0300 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2022-09-23 13:55:35 +0300 |
commit | 0c3e10cb44232833a50cb8e3e784c432906a60c1 (patch) | |
tree | d47c983e1b9c8ff206395c6753619c6fe0922649 /include/uapi/linux/ethtool.h | |
parent | 3e6eab8f3ef93cd78cd4b67f497ef6035eb073ad (diff) | |
download | linux-0c3e10cb44232833a50cb8e3e784c432906a60c1.tar.xz |
net: phy: Add support for rate matching
This adds support for rate matching (also known as rate adaptation) to
the phy subsystem. The general idea is that the phy interface runs at
one speed, and the MAC throttles the rate at which it sends packets to
the link speed. There's a good overview of several techniques for
achieving this at [1]. This patch adds support for three: pause-frame
based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and
2BASE-TL), and open-loop-based (such as in 10GBASE-W).
This patch makes a few assumptions and a few non assumptions about the
types of rate matching available. First, it assumes that different phys
may use different forms of rate matching. Second, it assumes that phys
can use rate matching for any of their supported link speeds (e.g. if a
phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T).
Third, it does not assume that all interface modes will use the same
form of rate matching. Fourth, it does not assume that all phy devices
will support rate matching (even if some do). Relaxing or strengthening
these (non-)assumptions could result in a different API. For example, if
all interface modes were assumed to use the same form of rate matching,
then a bitmask of interface modes supportting rate matching would
suffice.
For some better visibility into the process, the current rate matching
mode is exposed as part of the ethtool ksettings. For the moment, only
read access is supported. I'm not sure what userspace might want to
configure yet (disable it altogether, disable just one mode, specify the
mode to use, etc.). For the moment, since only pause-based rate
adaptation support is added in the next few commits, rate matching can
be disabled altogether by adjusting the advertisement.
802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and
"rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls
this feature "rate adaptation". I chose "rate matching" because it is
shorter, and because Russell doesn't think "adaptation" is correct in this
context.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/uapi/linux/ethtool.h')
-rw-r--r-- | include/uapi/linux/ethtool.h | 18 |
1 files changed, 16 insertions, 2 deletions
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 2d5741fd44bb..fe9893d1485d 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1840,6 +1840,20 @@ static inline int ethtool_validate_duplex(__u8 duplex) #define MASTER_SLAVE_STATE_SLAVE 3 #define MASTER_SLAVE_STATE_ERR 4 +/* These are used to throttle the rate of data on the phy interface when the + * native speed of the interface is higher than the link speed. These should + * not be used for phy interfaces which natively support multiple speeds (e.g. + * MII or SGMII). + */ +/* No rate matching performed. */ +#define RATE_MATCH_NONE 0 +/* The phy sends pause frames to throttle the MAC. */ +#define RATE_MATCH_PAUSE 1 +/* The phy asserts CRS to prevent the MAC from transmitting. */ +#define RATE_MATCH_CRS 2 +/* The MAC is programmed with a sufficiently-large IPG. */ +#define RATE_MATCH_OPEN_LOOP 3 + /* Which connector port. */ #define PORT_TP 0x00 #define PORT_AUI 0x01 @@ -2033,8 +2047,8 @@ enum ethtool_reset_flags { * reported consistently by PHYLIB. Read-only. * @master_slave_cfg: Master/slave port mode. * @master_slave_state: Master/slave port state. + * @rate_matching: Rate adaptation performed by the PHY * @reserved: Reserved for future use; see the note on reserved space. - * @reserved1: Reserved for future use; see the note on reserved space. * @link_mode_masks: Variable length bitmaps. * * If autonegotiation is disabled, the speed and @duplex represent the @@ -2085,7 +2099,7 @@ struct ethtool_link_settings { __u8 transceiver; __u8 master_slave_cfg; __u8 master_slave_state; - __u8 reserved1[1]; + __u8 rate_matching; __u32 reserved[7]; __u32 link_mode_masks[]; /* layout of link_mode_masks fields: |