Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.6-rc1.

  Lots of cleanups in here this cycle, and some driver updates. Short
  summary is:

   - Jiri's continued work to make the tty code and apis be a bit more
     sane with regards to modern kernel coding style and types

   - cpm_uart driver updates

   - n_gsm updates and fixes

   - meson driver updates

   - sc16is7xx driver updates

   - 8250 driver updates for different hardware types

   - qcom-geni driver fixes

   - tegra serial driver change

   - stm32 driver updates

   - synclink_gt driver cleanups

   - tty structure size reduction

  All of these have been in linux-next this week with no reported
  issues. The last bit of cleanups from Jiri and the tty structure size
  reduction came in last week, a bit late but as they were just style
  changes and size reductions, I figured they should get into this merge
  cycle so that others can work on top of them with no merge conflicts"

* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  tty: shrink the size of struct tty_struct by 40 bytes
  tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
  tty: n_tty: extract ECHO_OP processing to a separate function
  tty: n_tty: unify counts to size_t
  tty: n_tty: use u8 for chars and flags
  tty: n_tty: simplify chars_in_buffer()
  tty: n_tty: remove unsigned char casts from character constants
  tty: n_tty: move newline handling to a separate function
  tty: n_tty: move canon handling to a separate function
  tty: n_tty: use MASK() for masking out size bits
  tty: n_tty: make n_tty_data::num_overrun unsigned
  tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
  tty: n_tty: use 'num' for writes' counts
  tty: n_tty: use output character directly
  tty: n_tty: make flow of n_tty_receive_buf_common() a bool
  Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
  Documentation: devices.txt: Fix minors for ttyCPM*
  Documentation: devices.txt: Remove ttySIOC*
  Documentation: devices.txt: Remove ttyIOC*
  serial: 8250_bcm7271: improve bcm7271 8250 port
  ...

2 files changed, 104 insertions, 58 deletions

diff --git a/include/uapi/linux/gsmmux.h b/include/uapi/linux/gsmmux.h
index eb67884e5f38..4c878d84dbda 100644
--- a/include/uapi/linux/gsmmux.h
+++ b/include/uapi/linux/gsmmux.h
@@ -2,10 +2,45 @@
 #ifndef _LINUX_GSMMUX_H
 #define _LINUX_GSMMUX_H
 
+#include <linux/const.h>
 #include <linux/if.h>
 #include <linux/ioctl.h>
 #include <linux/types.h>
 
+/*
+ * flags definition for n_gsm
+ *
+ * Used by:
+ * struct gsm_config_ext.flags
+ * struct gsm_dlci_config.flags
+ */
+/* Forces a DLCI reset if set. Otherwise, a DLCI reset is only done if
+ * incompatible settings were provided. Always cleared on retrieval.
+ */
+#define GSM_FL_RESTART	_BITUL(0)
+
+/**
+ * struct gsm_config - n_gsm basic configuration parameters
+ *
+ * This structure is used in combination with GSMIOC_GETCONF and GSMIOC_SETCONF
+ * to retrieve and set the basic parameters of an n_gsm ldisc.
+ * struct gsm_config_ext can be used to configure extended ldisc parameters.
+ *
+ * All timers are in units of 1/100th of a second.
+ *
+ * @adaption:      Convergence layer type
+ * @encapsulation: Framing (0 = basic option, 1 = advanced option)
+ * @initiator:     Initiator or responder
+ * @t1:            Acknowledgment timer
+ * @t2:            Response timer for multiplexer control channel
+ * @t3:            Response timer for wake-up procedure
+ * @n2:            Maximum number of retransmissions
+ * @mru:           Maximum incoming frame payload size
+ * @mtu:           Maximum outgoing frame payload size
+ * @k:             Window size
+ * @i:             Frame type (1 = UIH, 2 = UI)
+ * @unused:        Can not be used
+ */
 struct gsm_config
 {
 	unsigned int adaption;
@@ -19,18 +54,32 @@ struct gsm_config
 	unsigned int mtu;
 	unsigned int k;
 	unsigned int i;
-	unsigned int unused[8];	/* Can not be used */
+	unsigned int unused[8];
 };
 
 #define GSMIOC_GETCONF		_IOR('G', 0, struct gsm_config)
 #define GSMIOC_SETCONF		_IOW('G', 1, struct gsm_config)
 
+/**
+ * struct gsm_netconfig - n_gsm network configuration parameters
+ *
+ * This structure is used in combination with GSMIOC_ENABLE_NET and
+ * GSMIOC_DISABLE_NET to enable or disable a network data connection
+ * over a mux virtual tty channel. This is for modems that support
+ * data connections with raw IP frames instead of PPP.
+ *
+ * @adaption: Adaption to use in network mode.
+ * @protocol: Protocol to use - only ETH_P_IP supported.
+ * @unused2:  Can not be used.
+ * @if_name:  Interface name format string.
+ * @unused:   Can not be used.
+ */
 struct gsm_netconfig {
-	unsigned int adaption;  /* Adaption to use in network mode */
-	unsigned short protocol;/* Protocol to use - only ETH_P_IP supported */
-	unsigned short unused2;	/* Can not be used */
-	char if_name[IFNAMSIZ];	/* interface name format string */
-	__u8 unused[28];        /* Can not be used */
+	unsigned int adaption;
+	unsigned short protocol;
+	unsigned short unused2;
+	char if_name[IFNAMSIZ];
+	__u8 unused[28];
 };
 
 #define GSMIOC_ENABLE_NET      _IOW('G', 2, struct gsm_netconfig)
@@ -39,26 +88,57 @@ struct gsm_netconfig {
 /* get the base tty number for a configured gsmmux tty */
 #define GSMIOC_GETFIRST		_IOR('G', 4, __u32)
 
+/**
+ * struct gsm_config_ext - n_gsm extended configuration parameters
+ *
+ * This structure is used in combination with GSMIOC_GETCONF_EXT and
+ * GSMIOC_SETCONF_EXT to retrieve and set the extended parameters of an
+ * n_gsm ldisc.
+ *
+ * All timers are in units of 1/100th of a second.
+ *
+ * @keep_alive:  Control channel keep-alive in 1/100th of a second (0 to disable).
+ * @wait_config: Wait for DLCI config before opening virtual link?
+ * @flags:       Mux specific flags.
+ * @reserved:    For future use, must be initialized to zero.
+ */
 struct gsm_config_ext {
-	__u32 keep_alive;	/* Control channel keep-alive in 1/100th of a
-				 * second (0 to disable)
-				 */
-	__u32 wait_config;	/* Wait for DLCI config before opening virtual link? */
-	__u32 reserved[6];	/* For future use, must be initialized to zero */
+	__u32 keep_alive;
+	__u32 wait_config;
+	__u32 flags;
+	__u32 reserved[5];
 };
 
 #define GSMIOC_GETCONF_EXT	_IOR('G', 5, struct gsm_config_ext)
 #define GSMIOC_SETCONF_EXT	_IOW('G', 6, struct gsm_config_ext)
 
-/* Set channel accordingly before calling GSMIOC_GETCONF_DLCI. */
+/**
+ * struct gsm_dlci_config - n_gsm channel configuration parameters
+ *
+ * This structure is used in combination with GSMIOC_GETCONF_DLCI and
+ * GSMIOC_SETCONF_DLCI to retrieve and set the channel specific parameters
+ * of an n_gsm ldisc.
+ *
+ * Set the channel accordingly before calling GSMIOC_GETCONF_DLCI.
+ *
+ * @channel:  DLCI (0 for the associated DLCI).
+ * @adaption: Convergence layer type.
+ * @mtu:      Maximum transfer unit.
+ * @priority: Priority (0 for default value).
+ * @i:        Frame type (1 = UIH, 2 = UI).
+ * @k:        Window size (0 for default value).
+ * @flags:    DLCI specific flags.
+ * @reserved: For future use, must be initialized to zero.
+ */
 struct gsm_dlci_config {
-	__u32 channel;		/* DLCI (0 for the associated DLCI) */
-	__u32 adaption;		/* Convergence layer type */
-	__u32 mtu;		/* Maximum transfer unit */
-	__u32 priority;		/* Priority (0 for default value) */
-	__u32 i;		/* Frame type (1 = UIH, 2 = UI) */
-	__u32 k;		/* Window size (0 for default value) */
-	__u32 reserved[8];	/* For future use, must be initialized to zero */
+	__u32 channel;
+	__u32 adaption;
+	__u32 mtu;
+	__u32 priority;
+	__u32 i;
+	__u32 k;
+	__u32 flags;
+	__u32 reserved[7];
 };
 
 #define GSMIOC_GETCONF_DLCI	_IOWR('G', 7, struct gsm_dlci_config)
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 281fa286555c..add349889d0a 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -25,6 +25,8 @@
 
 /*
  * The type definitions.  These are from Ted Ts'o's serial.h
+ * By historical reasons the values from 0 to 13 are defined
+ * in the include/uapi/linux/serial.h, do not define them here.
  */
 #define PORT_NS16550A	14
 #define PORT_XSCALE	15
@@ -94,15 +96,9 @@
 #define PORT_SCIF	53
 #define PORT_IRDA	54
 
-/* Samsung S3C2410 SoC and derivatives thereof */
-#define PORT_S3C2410    55
-
 /* SGI IP22 aka Indy / Challenge S / Indigo 2 */
 #define PORT_IP22ZILOG	56
 
-/* Sharp LH7a40x -- an ARM9 SoC series */
-#define PORT_LH7A40X	57
-
 /* PPC CPM type number */
 #define PORT_CPM        58
 
@@ -112,37 +108,23 @@
 /* IBM icom */
 #define PORT_ICOM	60
 
-/* Samsung S3C2440 SoC */
-#define PORT_S3C2440	61
-
 /* Motorola i.MX SoC */
 #define PORT_IMX	62
 
-/* Marvell MPSC (obsolete unused) */
-#define PORT_MPSC	63
-
 /* TXX9 type number */
 #define PORT_TXX9	64
 
-/* Samsung S3C2400 SoC */
-#define PORT_S3C2400	67
-
-/* M32R SIO */
-#define PORT_M32R_SIO	68
-
 /*Digi jsm */
 #define PORT_JSM        69
 
 /* SUN4V Hypervisor Console */
 #define PORT_SUNHV	72
 
-#define PORT_S3C2412	73
-
 /* Xilinx uartlite */
 #define PORT_UARTLITE	74
 
-/* Blackfin bf5xx */
-#define PORT_BFIN	75
+/* Broadcom BCM7271 UART */
+#define PORT_BCM7271	76
 
 /* Broadcom SB1250, etc. SOC */
 #define PORT_SB1250_DUART	77
@@ -150,13 +132,6 @@
 /* Freescale ColdFire */
 #define PORT_MCF	78
 
-/* Blackfin SPORT */
-#define PORT_BFIN_SPORT		79
-
-/* MN10300 on-chip UART numbers */
-#define PORT_MN10300		80
-#define PORT_MN10300_CTS	81
-
 #define PORT_SC26XX	82
 
 /* SH-SCI */
@@ -164,9 +139,6 @@
 
 #define PORT_S3C6400	84
 
-/* NWPSERIAL, now removed */
-#define PORT_NWPSERIAL	85
-
 /* MAX3100 */
 #define PORT_MAX3100    86
 
@@ -225,13 +197,10 @@
 /* ST ASC type numbers */
 #define PORT_ASC       105
 
-/* Tilera TILE-Gx UART */
-#define PORT_TILEGX	106
-
 /* MEN 16z135 UART */
 #define PORT_MEN_Z135	107
 
-/* SC16IS74xx */
+/* SC16IS7xx */
 #define PORT_SC16IS7XX   108
 
 /* MESON */
@@ -243,9 +212,6 @@
 /* SPRD SERIAL  */
 #define PORT_SPRD	111
 
-/* Cris v10 / v32 SoC */
-#define PORT_CRIS	112
-
 /* STM32 USART */
 #define PORT_STM32	113