Merge tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Only one framework update this time around, a change from Lars-Peter
  to move full to pm_ops and remove the legacy bus PM ops.  Otherwise
  it's all driver updates:

   - make the spidev driver complain loudly if registered as spidev with
     DT rather than with a compatible string, hopefully helping people
     avoid making that mistake.

   - error handling and robustness fixes for the Designware and Intel
     MID drivers from Andy Shevchenko.

   - substantial performance improvements for the Raspberry Pi driver
     from Martin Sperl.

   - several new features for spidev_test from Adrian Remonda and Ian
     Abbott"

* tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits)
  spi: bcm2835: enabling polling mode for transfers shorter than 30us
  spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
  spi: img-spfi: Control CS lines with GPIO
  spi: img-spfi: Reset controller after each message
  spi: img-spfi: Implement a handle_err() callback
  spi: img-spfi: Setup TRANSACTION register before CONTROL register
  spi: Make master->handle_err() callback optional to avoid crashes
  spi: img-spfi: Limit bit clock to 1/4th of input clock
  spi: img-spfi: Implement a prepare_message() callback
  spi: fsl-dspi: Add ~50ns delay between cs and sck
  spi: fsl-dspi: Add cs-sck delays
  spi: fsl-dspi: Fix clock rate scale values
  spi: signedness bug in qspi_trigger_transfer_out_int()
  spi: imx: read back the RX/TX watermark levels earlier
  spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers()
  spi: bitbang: only toggle bitchanges
  spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
  spi: fsl-dspi: Fix clock rate scale values
  spi: Using Trigger number to transmit/receive data
  spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message
  ...

2 files changed, 4 insertions, 80 deletions

diff --git a/include/linux/intel_mid_dma.h b/include/linux/intel_mid_dma.h
deleted file mode 100644
index 10496bd24c5c..000000000000
--- a/include/linux/intel_mid_dma.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  intel_mid_dma.h - Intel MID DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul@intel.com>
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#ifndef __INTEL_MID_DMA_H__
-#define __INTEL_MID_DMA_H__
-
-#include <linux/dmaengine.h>
-
-#define DMA_PREP_CIRCULAR_LIST		(1 << 10)
-
-/*DMA mode configurations*/
-enum intel_mid_dma_mode {
-	LNW_DMA_PER_TO_MEM = 0, /*periphral to memory configuration*/
-	LNW_DMA_MEM_TO_PER,	/*memory to periphral configuration*/
-	LNW_DMA_MEM_TO_MEM,	/*mem to mem confg (testing only)*/
-};
-
-/*DMA handshaking*/
-enum intel_mid_dma_hs_mode {
-	LNW_DMA_HW_HS = 0,	/*HW Handshaking only*/
-	LNW_DMA_SW_HS = 1,	/*SW Handshaking not recommended*/
-};
-
-/*Burst size configuration*/
-enum intel_mid_dma_msize {
-	LNW_DMA_MSIZE_1 = 0x0,
-	LNW_DMA_MSIZE_4 = 0x1,
-	LNW_DMA_MSIZE_8 = 0x2,
-	LNW_DMA_MSIZE_16 = 0x3,
-	LNW_DMA_MSIZE_32 = 0x4,
-	LNW_DMA_MSIZE_64 = 0x5,
-};
-
-/**
- * struct intel_mid_dma_slave - DMA slave structure
- *
- * @dirn: DMA trf direction
- * @src_width: tx register width
- * @dst_width: rx register width
- * @hs_mode: HW/SW handshaking mode
- * @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
- * @src_msize: Source DMA burst size
- * @dst_msize: Dst DMA burst size
- * @per_addr: Periphral address
- * @device_instance: DMA peripheral device instance, we can have multiple
- *		peripheral device connected to single DMAC
- */
-struct intel_mid_dma_slave {
-	enum intel_mid_dma_hs_mode	hs_mode;  /*handshaking*/
-	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-	unsigned int		device_instance; /*0, 1 for periphral instance*/
-	struct dma_slave_config		dma_slave;
-};
-
-#endif /*__INTEL_MID_DMA_H__*/
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 856d34dde79b..d673072346f2 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -162,8 +162,6 @@ struct spi_transfer;
  * @remove: Unbinds this driver from the spi device
  * @shutdown: Standard shutdown callback used during system state
  *	transitions such as powerdown/halt and kexec
- * @suspend: Standard suspend callback used during system state transitions
- * @resume: Standard resume callback used during system state transitions
  * @driver: SPI device drivers should initialize the name and owner
  *	field of this structure.
  *
@@ -184,8 +182,6 @@ struct spi_driver {
 	int			(*probe)(struct spi_device *spi);
 	int			(*remove)(struct spi_device *spi);
 	void			(*shutdown)(struct spi_device *spi);
-	int			(*suspend)(struct spi_device *spi, pm_message_t mesg);
-	int			(*resume)(struct spi_device *spi);
 	struct device_driver	driver;
 };
 
@@ -294,6 +290,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *                    transfer_one_message are mutually exclusive; when both
  *                    are set, the generic subsystem does not call your
  *                    transfer_one callback.
+ * @handle_err: the subsystem calls the driver to handle an error that occurs
+ *		in the generic implementation of transfer_one_message().
  * @unprepare_message: undo any work done by prepare_message().
  * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
  *	number. Any individual value may be -ENOENT for CS lines that
@@ -448,6 +446,8 @@ struct spi_master {
 	void (*set_cs)(struct spi_device *spi, bool enable);
 	int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
 			    struct spi_transfer *transfer);
+	void (*handle_err)(struct spi_master *master,
+			   struct spi_message *message);
 
 	/* gpio chip select */
 	int			*cs_gpios;