diff options
author | Ivan T. Ivanov <iivanov@mm-sol.com> | 2014-04-28 17:34:18 +0400 |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2014-04-30 20:28:45 +0400 |
commit | d69c6f5df376ea40df5886468b155f515fddfbb2 (patch) | |
tree | fa1cbe3473abe6991397971430dfe56e3a33bf44 /include | |
parent | cfa3ff5dfe6a11ac8bc4a080416984ab00b0980c (diff) | |
download | linux-d69c6f5df376ea40df5886468b155f515fddfbb2.tar.xz |
usb: phy: msm: Correct USB PHY Reset sequence for newer platform
On few legacy platforms, USB PHY is having dedicated reset clk.
It is used to reset USB PHY after putting USB PHY into low power
mode and for calibration of USB PHY. Putting USB PHY into low
power mode is causing ulpi read/write timeout as expected. USB PHY
reset clk is not available on newer platform.
For 28nm PHY, reset USB PHY after resetting USB LINK.
Also reset USB PHY using USB_PHY_PON bit with USB_OTG_HS_PHY_CTRL
register after programming USB PHY Override registers as suggested
with hardware programming guidelines.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Cc: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/usb/msm_hsusb_hw.h | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index e6d703567155..575c74397e52 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -42,9 +42,14 @@ #define ULPI_DATA(n) ((n) & 255) #define ULPI_DATA_READ(n) (((n) >> 8) & 255) +/* synopsys 28nm phy registers */ +#define ULPI_PWR_CLK_MNG_REG 0x88 +#define OTG_COMP_DISABLE BIT(0) + #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ #define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ +#define PHY_POR_ASSERT (1 << 0) /* USB2 28nm PHY POR ASSERT */ /* OTG definitions */ #define OTGSC_INTSTS_MASK (0x7f << 16) |