Merge tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Notable changes this time around:

MAINTAINERS
 - add missing driver git trees

ath11k
 - factory test mode support

iwlwifi
 - config rework to drop test devices and
   split the different families
 - major update for new firmware and MLO

stack
 - initial multi-link reconfiguration suppor
 - multi-BSSID and MLO improvements

other
 - fix the last few W=1 warnings from GCC 13
 - merged wireless tree to avoid conflicts

* tag 'wireless-next-2023-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (245 commits)
  wifi: ieee80211: fix erroneous NSTR bitmap size checks
  wifi: rtlwifi: cleanup USB interface
  wifi: rtlwifi: simplify LED management
  wifi: ath10k: improve structure padding
  wifi: ath9k: convert msecs to jiffies where needed
  wifi: iwlwifi: mvm: Add support for IGTK in D3 resume flow
  wifi: iwlwifi: mvm: update two most recent GTKs on D3 resume flow
  wifi: iwlwifi: mvm: Refactor security key update after D3
  wifi: mac80211: mark keys as uploaded when added by the driver
  wifi: iwlwifi: remove support of A0 version of FM RF
  wifi: iwlwifi: cfg: clean up Bz module firmware lines
  wifi: iwlwifi: pcie: add device id 51F1 for killer 1675
  wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devices
  wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constants
  wifi: iwlwifi: also unify Ma device configurations
  wifi: iwlwifi: also unify Sc device configurations
  wifi: iwlwifi: unify Bz/Gl device configurations
  wifi: iwlwifi: pcie: also drop jacket from info macro
  wifi: iwlwifi: remove support for *nJ devices
  wifi: iwlwifi: don't load old firmware for 22000
  ...
====================

Link: https://lore.kernel.org/r/20230622185602.147650-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

6 files changed, 394 insertions, 66 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 516cd32d6196..4b998090898e 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1996,12 +1996,18 @@ struct ieee80211_mu_edca_param_set {
  * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams
  *     supported for reception and the maximum number of spatial streams
  *     supported for transmission for MCS 12 - 13.
+ * @rx_tx_max_nss: array of the previous fields for easier loop access
  */
 struct ieee80211_eht_mcs_nss_supp_20mhz_only {
-	u8 rx_tx_mcs7_max_nss;
-	u8 rx_tx_mcs9_max_nss;
-	u8 rx_tx_mcs11_max_nss;
-	u8 rx_tx_mcs13_max_nss;
+	union {
+		struct {
+			u8 rx_tx_mcs7_max_nss;
+			u8 rx_tx_mcs9_max_nss;
+			u8 rx_tx_mcs11_max_nss;
+			u8 rx_tx_mcs13_max_nss;
+		};
+		u8 rx_tx_max_nss[4];
+	};
 };
 
 /**
@@ -2021,11 +2027,17 @@ struct ieee80211_eht_mcs_nss_supp_20mhz_only {
  * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams
  *     supported for reception and the maximum number of spatial streams
  *     supported for transmission for MCS 12 - 13.
+ * @rx_tx_max_nss: array of the previous fields for easier loop access
  */
 struct ieee80211_eht_mcs_nss_supp_bw {
-	u8 rx_tx_mcs9_max_nss;
-	u8 rx_tx_mcs11_max_nss;
-	u8 rx_tx_mcs13_max_nss;
+	union {
+		struct {
+			u8 rx_tx_mcs9_max_nss;
+			u8 rx_tx_mcs11_max_nss;
+			u8 rx_tx_mcs13_max_nss;
+		};
+		u8 rx_tx_max_nss[3];
+	};
 };
 
 /**
@@ -2078,7 +2090,7 @@ struct ieee80211_eht_cap_elem {
  */
 struct ieee80211_eht_operation {
 	u8 params;
-	__le32 basic_mcs_nss;
+	struct ieee80211_eht_mcs_nss_supp_20mhz_only basic_mcs_nss;
 	u8 optional[];
 } __packed;
 
@@ -2859,6 +2871,7 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 
 /* Maximum number of supported EHT LTF is split */
 #define IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK	0xc0
+#define IEEE80211_EHT_PHY_CAP5_SUPP_EXTRA_EHT_LTF		0x40
 #define IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF_MASK	0x07
 
 #define IEEE80211_EHT_PHY_CAP6_MCS15_SUPP_MASK			0x78
@@ -4480,8 +4493,8 @@ static inline bool for_each_element_completed(const struct element *element,
 #define IEEE80211_AP_INFO_TBTT_HDR_FILTERED			0x04
 #define IEEE80211_AP_INFO_TBTT_HDR_COLOC			0x08
 #define IEEE80211_AP_INFO_TBTT_HDR_COUNT			0xF0
-#define IEEE80211_TBTT_INFO_OFFSET_BSSID_BSS_PARAM		9
-#define IEEE80211_TBTT_INFO_OFFSET_BSSID_SSSID_BSS_PARAM	13
+#define IEEE80211_TBTT_INFO_TYPE_TBTT				0
+#define IEEE80211_TBTT_INFO_TYPE_MLD				1
 
 #define IEEE80211_RNR_TBTT_PARAMS_OCT_RECOMMENDED		0x01
 #define IEEE80211_RNR_TBTT_PARAMS_SAME_SSID			0x02
@@ -4491,6 +4504,9 @@ static inline bool for_each_element_completed(const struct element *element,
 #define IEEE80211_RNR_TBTT_PARAMS_PROBE_ACTIVE			0x20
 #define IEEE80211_RNR_TBTT_PARAMS_COLOC_AP			0x40
 
+#define IEEE80211_RNR_TBTT_PARAMS_PSD_NO_LIMIT			127
+#define IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED			-128
+
 struct ieee80211_neighbor_ap_info {
 	u8 tbtt_info_hdr;
 	u8 tbtt_info_len;
@@ -4505,6 +4521,42 @@ enum ieee80211_range_params_max_total_ltf {
 	IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_UNSPECIFIED,
 };
 
+/*
+ * reduced neighbor report, based on Draft P802.11be_D3.0,
+ * section 9.4.2.170.2.
+ */
+struct ieee80211_rnr_mld_params {
+	u8 mld_id;
+	__le16 params;
+} __packed;
+
+#define IEEE80211_RNR_MLD_PARAMS_LINK_ID			0x000F
+#define IEEE80211_RNR_MLD_PARAMS_BSS_CHANGE_COUNT		0x0FF0
+#define IEEE80211_RNR_MLD_PARAMS_UPDATES_INCLUDED		0x1000
+#define IEEE80211_RNR_MLD_PARAMS_DISABLED_LINK			0x2000
+
+/* Format of the TBTT information element if it has 7, 8 or 9 bytes */
+struct ieee80211_tbtt_info_7_8_9 {
+	u8 tbtt_offset;
+	u8 bssid[ETH_ALEN];
+
+	/* The following element is optional, structure may not grow */
+	u8 bss_params;
+	s8 psd_20;
+} __packed;
+
+/* Format of the TBTT information element if it has >= 11 bytes */
+struct ieee80211_tbtt_info_ge_11 {
+	u8 tbtt_offset;
+	u8 bssid[ETH_ALEN];
+	__le32 short_ssid;
+
+	/* The following elements are optional, structure may grow */
+	u8 bss_params;
+	s8 psd_20;
+	struct ieee80211_rnr_mld_params mld_params;
+} __packed;
+
 /* multi-link device */
 #define IEEE80211_MLD_MAX_NUM_LINKS	15
 
@@ -4532,6 +4584,14 @@ struct ieee80211_multi_link_elem {
 #define IEEE80211_MED_SYNC_DELAY_SYNC_OFDM_ED_THRESH	0x0f00
 #define IEEE80211_MED_SYNC_DELAY_SYNC_MAX_NUM_TXOPS	0xf000
 
+/*
+ * Described in P802.11be_D3.0
+ * dot11MSDTimerDuration should default to 5484 (i.e. 171.375)
+ * dot11MSDOFDMEDthreshold defaults to -72 (i.e. 0)
+ * dot11MSDTXOPMAX defaults to 1
+ */
+#define IEEE80211_MED_SYNC_DELAY_DEFAULT		0x10ac
+
 #define IEEE80211_EML_CAP_EMLSR_SUPP			0x0001
 #define IEEE80211_EML_CAP_EMLSR_PADDING_DELAY		0x000e
 #define  IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_0US		0
@@ -4614,15 +4674,12 @@ static inline u8 ieee80211_mle_common_size(const u8 *data)
 	case IEEE80211_ML_CONTROL_TYPE_BASIC:
 	case IEEE80211_ML_CONTROL_TYPE_PREQ:
 	case IEEE80211_ML_CONTROL_TYPE_TDLS:
+	case IEEE80211_ML_CONTROL_TYPE_RECONF:
 		/*
 		 * The length is the first octet pointed by mle->variable so no
 		 * need to add anything
 		 */
 		break;
-	case IEEE80211_ML_CONTROL_TYPE_RECONF:
-		if (control & IEEE80211_MLC_RECONF_PRES_MLD_MAC_ADDR)
-			common += ETH_ALEN;
-		return common;
 	case IEEE80211_ML_CONTROL_TYPE_PRIO_ACCESS:
 		if (control & IEEE80211_MLC_PRIO_ACCESS_PRES_AP_MLD_MAC_ADDR)
 			common += ETH_ALEN;
@@ -4636,13 +4693,42 @@ static inline u8 ieee80211_mle_common_size(const u8 *data)
 }
 
 /**
+ * ieee80211_mle_get_bss_param_ch_cnt - returns the BSS parameter change count
+ * @mle: the basic multi link element
+ *
+ * The element is assumed to be of the correct type (BASIC) and big enough,
+ * this must be checked using ieee80211_mle_type_ok().
+ *
+ * If the BSS parameter change count value can't be found (the presence bit
+ * for it is clear), 0 will be returned.
+ */
+static inline u8
+ieee80211_mle_get_bss_param_ch_cnt(const struct ieee80211_multi_link_elem *mle)
+{
+	u16 control = le16_to_cpu(mle->control);
+	const u8 *common = mle->variable;
+
+	/* common points now at the beginning of ieee80211_mle_basic_common_info */
+	common += sizeof(struct ieee80211_mle_basic_common_info);
+
+	if (!(control & IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT))
+		return 0;
+
+	if (control & IEEE80211_MLC_BASIC_PRES_LINK_ID)
+		common += 1;
+
+	return *common;
+}
+
+/**
  * ieee80211_mle_get_eml_sync_delay - returns the medium sync delay
  * @data: pointer to the multi link EHT IE
  *
- * The element is assumed to be big enough. This must be checked by
- * ieee80211_mle_size_ok().
- * If the medium synchronization can't be found (the type is not basic, or
- * the medium sync presence bit is clear), 0 will be returned.
+ * The element is assumed to be of the correct type (BASIC) and big enough,
+ * this must be checked using ieee80211_mle_type_ok().
+ *
+ * If the medium synchronization is not present, then the default value is
+ * returned.
  */
 static inline u16 ieee80211_mle_get_eml_med_sync_delay(const u8 *data)
 {
@@ -4650,17 +4736,11 @@ static inline u16 ieee80211_mle_get_eml_med_sync_delay(const u8 *data)
 	u16 control = le16_to_cpu(mle->control);
 	const u8 *common = mle->variable;
 
-	if (u16_get_bits(control, IEEE80211_ML_CONTROL_TYPE) !=
-	    IEEE80211_ML_CONTROL_TYPE_BASIC)
-		return 0;
-
-	/* common points now at the beginning of
-	 * ieee80211_mle_basic_common_info
-	 */
+	/* common points now at the beginning of ieee80211_mle_basic_common_info */
 	common += sizeof(struct ieee80211_mle_basic_common_info);
 
 	if (!(control & IEEE80211_MLC_BASIC_PRES_MED_SYNC_DELAY))
-		return 0;
+		return IEEE80211_MED_SYNC_DELAY_DEFAULT;
 
 	if (control & IEEE80211_MLC_BASIC_PRES_LINK_ID)
 		common += 1;
@@ -4674,10 +4754,10 @@ static inline u16 ieee80211_mle_get_eml_med_sync_delay(const u8 *data)
  * ieee80211_mle_get_eml_cap - returns the EML capability
  * @data: pointer to the multi link EHT IE
  *
- * The element is assumed to be big enough. This must be checked by
- * ieee80211_mle_size_ok().
- * If the EML capability can't be found (the type is not basic, or
- * the EML capability presence bit is clear), 0 will be returned.
+ * The element is assumed to be of the correct type (BASIC) and big enough,
+ * this must be checked using ieee80211_mle_type_ok().
+ *
+ * If the EML capability is not present, 0 will be returned.
  */
 static inline u16 ieee80211_mle_get_eml_cap(const u8 *data)
 {
@@ -4685,10 +4765,6 @@ static inline u16 ieee80211_mle_get_eml_cap(const u8 *data)
 	u16 control = le16_to_cpu(mle->control);
 	const u8 *common = mle->variable;
 
-	if (u16_get_bits(control, IEEE80211_ML_CONTROL_TYPE) !=
-	    IEEE80211_ML_CONTROL_TYPE_BASIC)
-		return 0;
-
 	/* common points now at the beginning of ieee80211_mle_basic_common_info */
 	common += sizeof(struct ieee80211_mle_basic_common_info);
 
@@ -4773,6 +4849,28 @@ static inline bool ieee80211_mle_size_ok(const u8 *data, size_t len)
 	return mle->variable[0] >= common;
 }
 
+/**
+ * ieee80211_mle_type_ok - validate multi-link element type and size
+ * @data: pointer to the element data
+ * @type: expected type of the element
+ * @len: length of the containing element
+ */
+static inline bool ieee80211_mle_type_ok(const u8 *data, u8 type, size_t len)
+{
+	const struct ieee80211_multi_link_elem *mle = (const void *)data;
+	u16 control;
+
+	if (!ieee80211_mle_size_ok(data, len))
+		return false;
+
+	control = le16_to_cpu(mle->control);
+
+	if (u16_get_bits(control, IEEE80211_ML_CONTROL_TYPE) == type)
+		return true;
+
+	return false;
+}
+
 enum ieee80211_mle_subelems {
 	IEEE80211_MLE_SUBELEM_PER_STA_PROFILE		= 0,
 	IEEE80211_MLE_SUBELEM_FRAGMENT		        = 254,
@@ -4795,11 +4893,13 @@ struct ieee80211_mle_per_sta_profile {
 } __packed;
 
 /**
- * ieee80211_mle_sta_prof_size_ok - validate multi-link element sta profile size
+ * ieee80211_mle_basic_sta_prof_size_ok - validate basic multi-link element sta
+ *	profile size
  * @data: pointer to the sub element data
  * @len: length of the containing sub element
  */
-static inline bool ieee80211_mle_sta_prof_size_ok(const u8 *data, size_t len)
+static inline bool ieee80211_mle_basic_sta_prof_size_ok(const u8 *data,
+							size_t len)
 {
 	const struct ieee80211_mle_per_sta_profile *prof = (const void *)data;
 	u16 control;
@@ -4819,21 +4919,93 @@ static inline bool ieee80211_mle_sta_prof_size_ok(const u8 *data, size_t len)
 		info_len += 8;
 	if (control & IEEE80211_MLE_STA_CONTROL_DTIM_INFO_PRESENT)
 		info_len += 2;
-	if (control & IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT)
-		info_len += 1;
-
 	if (control & IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE &&
-	    control & IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE) {
+	    control & IEEE80211_MLE_STA_CONTROL_NSTR_LINK_PAIR_PRESENT) {
 		if (control & IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE)
 			info_len += 2;
 		else
 			info_len += 1;
 	}
+	if (control & IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT)
+		info_len += 1;
 
 	return prof->sta_info_len >= info_len &&
 	       fixed + prof->sta_info_len <= len;
 }
 
+/**
+ * ieee80211_mle_basic_sta_prof_bss_param_ch_cnt - get per-STA profile BSS
+ *	parameter change count
+ * @prof: the per-STA profile, having been checked with
+ *	ieee80211_mle_basic_sta_prof_size_ok() for the correct length
+ *
+ * Return: The BSS parameter change count value if present, 0 otherwise.
+ */
+static inline u8
+ieee80211_mle_basic_sta_prof_bss_param_ch_cnt(const struct ieee80211_mle_per_sta_profile *prof)
+{
+	u16 control = le16_to_cpu(prof->control);
+	const u8 *pos = prof->variable;
+
+	if (!(control & IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT))
+		return 0;
+
+	if (control & IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT)
+		pos += 6;
+	if (control & IEEE80211_MLE_STA_CONTROL_BEACON_INT_PRESENT)
+		pos += 2;
+	if (control & IEEE80211_MLE_STA_CONTROL_TSF_OFFS_PRESENT)
+		pos += 8;
+	if (control & IEEE80211_MLE_STA_CONTROL_DTIM_INFO_PRESENT)
+		pos += 2;
+	if (control & IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE &&
+	    control & IEEE80211_MLE_STA_CONTROL_NSTR_LINK_PAIR_PRESENT) {
+		if (control & IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE)
+			pos += 2;
+		else
+			pos += 1;
+	}
+
+	return *pos;
+}
+
+#define IEEE80211_MLE_STA_RECONF_CONTROL_LINK_ID			0x000f
+#define IEEE80211_MLE_STA_RECONF_CONTROL_COMPLETE_PROFILE		0x0010
+#define IEEE80211_MLE_STA_RECONF_CONTROL_STA_MAC_ADDR_PRESENT		0x0020
+#define IEEE80211_MLE_STA_RECONF_CONTROL_AP_REM_TIMER_PRESENT		0x0040
+#define IEEE80211_MLE_STA_RECONF_CONTROL_OPERATION_UPDATE_TYPE		0x0780
+#define IEEE80211_MLE_STA_RECONF_CONTROL_OPERATION_PARAMS_PRESENT	0x0800
+
+/**
+ * ieee80211_mle_reconf_sta_prof_size_ok - validate reconfiguration multi-link
+ *	element sta profile size.
+ * @data: pointer to the sub element data
+ * @len: length of the containing sub element
+ */
+static inline bool ieee80211_mle_reconf_sta_prof_size_ok(const u8 *data,
+							 size_t len)
+{
+	const struct ieee80211_mle_per_sta_profile *prof = (const void *)data;
+	u16 control;
+	u8 fixed = sizeof(*prof);
+	u8 info_len = 1;
+
+	if (len < fixed)
+		return false;
+
+	control = le16_to_cpu(prof->control);
+
+	if (control & IEEE80211_MLE_STA_RECONF_CONTROL_STA_MAC_ADDR_PRESENT)
+		info_len += ETH_ALEN;
+	if (control & IEEE80211_MLE_STA_RECONF_CONTROL_AP_REM_TIMER_PRESENT)
+		info_len += 2;
+	if (control & IEEE80211_MLE_STA_RECONF_CONTROL_OPERATION_PARAMS_PRESENT)
+		info_len += 2;
+
+	return prof->sta_info_len >= info_len &&
+	       fixed + prof->sta_info_len - 1 <= len;
+}
+
 #define for_each_mle_subelement(_elem, _data, _len)			\
 	if (ieee80211_mle_size_ok(_data, _len))				\
 		for_each_element(_elem,					\
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b8619685bf6..7c7d03aa9d06 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -7,7 +7,7 @@
  * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014 Intel Mobile Communications GmbH
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2021 Intel Corporation
+ * Copyright (C) 2018-2021, 2023 Intel Corporation
  */
 
 #include <linux/ethtool.h>
@@ -1702,6 +1702,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
  * @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode
  * @RATE_INFO_FLAGS_EXTENDED_SC_DMG: 60GHz extended SC MCS
  * @RATE_INFO_FLAGS_EHT_MCS: EHT MCS information
+ * @RATE_INFO_FLAGS_S1G_MCS: MCS field filled with S1G MCS
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS			= BIT(0),
@@ -1712,6 +1713,7 @@ enum rate_info_flags {
 	RATE_INFO_FLAGS_EDMG			= BIT(5),
 	RATE_INFO_FLAGS_EXTENDED_SC_DMG		= BIT(6),
 	RATE_INFO_FLAGS_EHT_MCS			= BIT(7),
+	RATE_INFO_FLAGS_S1G_MCS			= BIT(8),
 };
 
 /**
@@ -1728,6 +1730,11 @@ enum rate_info_flags {
  * @RATE_INFO_BW_HE_RU: bandwidth determined by HE RU allocation
  * @RATE_INFO_BW_320: 320 MHz bandwidth
  * @RATE_INFO_BW_EHT_RU: bandwidth determined by EHT RU allocation
+ * @RATE_INFO_BW_1: 1 MHz bandwidth
+ * @RATE_INFO_BW_2: 2 MHz bandwidth
+ * @RATE_INFO_BW_4: 4 MHz bandwidth
+ * @RATE_INFO_BW_8: 8 MHz bandwidth
+ * @RATE_INFO_BW_16: 16 MHz bandwidth
  */
 enum rate_info_bw {
 	RATE_INFO_BW_20 = 0,
@@ -1739,6 +1746,11 @@ enum rate_info_bw {
 	RATE_INFO_BW_HE_RU,
 	RATE_INFO_BW_320,
 	RATE_INFO_BW_EHT_RU,
+	RATE_INFO_BW_1,
+	RATE_INFO_BW_2,
+	RATE_INFO_BW_4,
+	RATE_INFO_BW_8,
+	RATE_INFO_BW_16,
 };
 
 /**
@@ -1747,8 +1759,8 @@ enum rate_info_bw {
  * Information about a receiving or transmitting bitrate
  *
  * @flags: bitflag of flags from &enum rate_info_flags
- * @mcs: mcs index if struct describes an HT/VHT/HE rate
  * @legacy: bitrate in 100kbit/s for 802.11abg
+ * @mcs: mcs index if struct describes an HT/VHT/HE/EHT/S1G rate
  * @nss: number of streams (VHT & HE only)
  * @bw: bandwidth (from &enum rate_info_bw)
  * @he_gi: HE guard interval (from &enum nl80211_he_gi)
@@ -1761,9 +1773,9 @@ enum rate_info_bw {
  *	only valid if bw is %RATE_INFO_BW_EHT_RU)
  */
 struct rate_info {
-	u8 flags;
-	u8 mcs;
+	u16 flags;
 	u16 legacy;
+	u8 mcs;
 	u8 nss;
 	u8 bw;
 	u8 he_gi;
@@ -2454,6 +2466,7 @@ struct cfg80211_scan_info {
  * @short_ssid_valid: @short_ssid is valid and can be used
  * @psc_no_listen: when set, and the channel is a PSC channel, no need to wait
  *       20 TUs before starting to send probe requests.
+ * @psd_20: The AP's 20 MHz PSD value.
  */
 struct cfg80211_scan_6ghz_params {
 	u32 short_ssid;
@@ -2462,6 +2475,7 @@ struct cfg80211_scan_6ghz_params {
 	bool unsolicited_probe;
 	bool short_ssid_valid;
 	bool psc_no_listen;
+	s8 psd_20;
 };
 
 /**
@@ -2708,6 +2722,7 @@ enum cfg80211_signal_type {
  *	the BSS that requested the scan in which the beacon/probe was received.
  * @chains: bitmask for filled values in @chain_signal.
  * @chain_signal: per-chain signal strength of last received BSS in dBm.
+ * @drv_data: Data to be passed through to @inform_bss
  */
 struct cfg80211_inform_bss {
 	struct ieee80211_channel *chan;
@@ -2718,6 +2733,8 @@ struct cfg80211_inform_bss {
 	u8 parent_bssid[ETH_ALEN] __aligned(2);
 	u8 chains;
 	s8 chain_signal[IEEE80211_MAX_CHAINS];
+
+	void *drv_data;
 };
 
 /**
@@ -2870,11 +2887,14 @@ struct cfg80211_auth_request {
  *	if this is %NULL for a link, that link is not requested
  * @elems: extra elements for the per-STA profile for this link
  * @elems_len: length of the elements
+ * @disabled: If set this link should be included during association etc. but it
+ *	should not be used until enabled by the AP MLD.
  */
 struct cfg80211_assoc_link {
 	struct cfg80211_bss *bss;
 	const u8 *elems;
 	size_t elems_len;
+	bool disabled;
 };
 
 /**
@@ -4086,6 +4106,13 @@ struct mgmt_frame_regs {
  *
  * @change_bss: Modify parameters for a given BSS.
  *
+ * @inform_bss: Called by cfg80211 while being informed about new BSS data
+ *	for every BSS found within the reported data or frame. This is called
+ *	from within the cfg8011 inform_bss handlers while holding the bss_lock.
+ *	The data parameter is passed through from drv_data inside
+ *	struct cfg80211_inform_bss.
+ *	The new IE data for the BSS is explicitly passed.
+ *
  * @set_txq_params: Set TX queue parameters
  *
  * @libertas_set_mesh_channel: Only for backward compatibility for libertas,
@@ -4473,6 +4500,9 @@ struct cfg80211_ops {
 	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
 			      struct bss_parameters *params);
 
+	void	(*inform_bss)(struct wiphy *wiphy, struct cfg80211_bss *bss,
+			      const struct cfg80211_bss_ies *ies, void *data);
+
 	int	(*set_txq_params)(struct wiphy *wiphy, struct net_device *dev,
 				  struct ieee80211_txq_params *params);
 
@@ -4592,9 +4622,10 @@ struct cfg80211_ops {
 				  struct cfg80211_gtk_rekey_data *data);
 
 	int	(*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
-			     const u8 *peer, u8 action_code,  u8 dialog_token,
-			     u16 status_code, u32 peer_capability,
-			     bool initiator, const u8 *buf, size_t len);
+			     const u8 *peer, int link_id,
+			     u8 action_code, u8 dialog_token, u16 status_code,
+			     u32 peer_capability, bool initiator,
+			     const u8 *buf, size_t len);
 	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
 			     const u8 *peer, enum nl80211_tdls_operation oper);
 
@@ -6648,6 +6679,28 @@ cfg80211_find_vendor_ie(unsigned int oui, int oui_type,
 }
 
 /**
+ * cfg80211_defragment_element - Defrag the given element data into a buffer
+ *
+ * @elem: the element to defragment
+ * @ies: elements where @elem is contained
+ * @ieslen: length of @ies
+ * @data: buffer to store element data
+ * @data_len: length of @data
+ * @frag_id: the element ID of fragments
+ *
+ * Return: length of @data, or -EINVAL on error
+ *
+ * Copy out all data from an element that may be fragmented into @data, while
+ * skipping all headers.
+ *
+ * The function uses memmove() internally. It is acceptable to defragment an
+ * element in-place.
+ */
+ssize_t cfg80211_defragment_element(const struct element *elem, const u8 *ies,
+				    size_t ieslen, u8 *data, size_t data_len,
+				    u8 frag_id);
+
+/**
  * cfg80211_send_layer2_update - send layer 2 update frame
  *
  * @dev: network device
@@ -9154,4 +9207,17 @@ static inline int cfg80211_color_change_notify(struct net_device *dev)
 bool cfg80211_valid_disable_subchannel_bitmap(u16 *bitmap,
 					      const struct cfg80211_chan_def *chandef);
 
+/**
+ * cfg80211_links_removed - Notify about removed STA MLD setup links.
+ * @dev: network device.
+ * @link_mask: BIT mask of removed STA MLD setup link IDs.
+ *
+ * Inform cfg80211 and the userspace about removed STA MLD setup links due to
+ * AP MLD removing the corresponding affiliated APs with Multi-Link
+ * reconfiguration. Note that it's not valid to remove all links, in this
+ * case disconnect instead.
+ * Also note that the wdev mutex must be held.
+ */
+void cfg80211_links_removed(struct net_device *dev, u16 link_mask);
+
 #endif /* __NET_CFG80211_H */
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index f980a72f2ce6..c4722a9963de 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -535,6 +535,8 @@ enum ieee80211_radiotap_eht_usig_common {
 	IEEE80211_RADIOTAP_EHT_USIG_COMMON_BSS_COLOR_KNOWN	= 0x00000008,
 	IEEE80211_RADIOTAP_EHT_USIG_COMMON_TXOP_KNOWN		= 0x00000010,
 	IEEE80211_RADIOTAP_EHT_USIG_COMMON_BAD_USIG_CRC		= 0x00000020,
+	IEEE80211_RADIOTAP_EHT_USIG_COMMON_VALIDATE_BITS_CHECKED = 0x00000040,
+	IEEE80211_RADIOTAP_EHT_USIG_COMMON_VALIDATE_BITS_OK	= 0x00000080,
 	IEEE80211_RADIOTAP_EHT_USIG_COMMON_PHY_VER		= 0x00007000,
 	IEEE80211_RADIOTAP_EHT_USIG_COMMON_BW			= 0x00038000,
 	IEEE80211_RADIOTAP_EHT_USIG_COMMON_UL_DL		= 0x00040000,
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f4516c034da2..3a8a2d2c58c3 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -7,7 +7,7 @@
  * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
  * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2022 Intel Corporation
+ * Copyright (C) 2018 - 2023 Intel Corporation
  */
 
 #ifndef MAC80211_H
@@ -1755,12 +1755,15 @@ struct ieee80211_channel_switch {
  * @IEEE80211_VIF_GET_NOA_UPDATE: request to handle NOA attributes
  *	and send P2P_PS notification to the driver if NOA changed, even
  *	this is not pure P2P vif.
+ * @IEEE80211_VIF_DISABLE_SMPS_OVERRIDE: disable user configuration of
+ *	SMPS mode via debugfs.
  */
 enum ieee80211_vif_flags {
 	IEEE80211_VIF_BEACON_FILTER		= BIT(0),
 	IEEE80211_VIF_SUPPORTS_CQM_RSSI		= BIT(1),
 	IEEE80211_VIF_SUPPORTS_UAPSD		= BIT(2),
 	IEEE80211_VIF_GET_NOA_UPDATE		= BIT(3),
+	IEEE80211_VIF_DISABLE_SMPS_OVERRIDE	= BIT(4),
 };
 
 
@@ -1843,6 +1846,8 @@ struct ieee80211_vif_cfg {
  * @active_links: The bitmap of active links, or 0 for non-MLO.
  *	The driver shouldn't change this directly, but use the
  *	API calls meant for that purpose.
+ * @dormant_links: bitmap of valid but disabled links, or 0 for non-MLO.
+ *	Must be a subset of valid_links.
  * @addr: address of this interface
  * @p2p: indicates whether this AP or STA interface is a p2p
  *	interface, i.e. a GO or p2p-sta respectively
@@ -1880,7 +1885,7 @@ struct ieee80211_vif {
 	struct ieee80211_vif_cfg cfg;
 	struct ieee80211_bss_conf bss_conf;
 	struct ieee80211_bss_conf __rcu *link_conf[IEEE80211_MLD_MAX_NUM_LINKS];
-	u16 valid_links, active_links;
+	u16 valid_links, active_links, dormant_links;
 	u8 addr[ETH_ALEN] __aligned(2);
 	bool p2p;
 
@@ -1906,6 +1911,27 @@ struct ieee80211_vif {
 	u8 drv_priv[] __aligned(sizeof(void *));
 };
 
+/**
+ * ieee80211_vif_usable_links - Return the usable links for the vif
+ * @vif: the vif for which the usable links are requested
+ * Return: the usable link bitmap
+ */
+static inline u16 ieee80211_vif_usable_links(const struct ieee80211_vif *vif)
+{
+	return vif->valid_links & ~vif->dormant_links;
+}
+
+/**
+ * ieee80211_vif_is_mld - Returns true iff the vif is an MLD one
+ * @vif: the vif
+ * Return: %true if the vif is an MLD, %false otherwise.
+ */
+static inline bool ieee80211_vif_is_mld(const struct ieee80211_vif *vif)
+{
+	/* valid_links != 0 indicates this vif is an MLD */
+	return vif->valid_links != 0;
+}
+
 #define for_each_vif_active_link(vif, link, link_id)				\
 	for (link_id = 0; link_id < ARRAY_SIZE((vif)->link_conf); link_id++)	\
 		if ((!(vif)->active_links ||					\
@@ -3847,7 +3873,7 @@ struct ieee80211_prep_tx_info {
  *
  * @link_sta_add_debugfs: Drivers can use this callback to add debugfs files
  *	when a link is added to a mac80211 station. This callback
- *	should be within a CPTCFG_MAC80211_DEBUGFS conditional. This
+ *	should be within a CONFIG_MAC80211_DEBUGFS conditional. This
  *	callback can sleep.
  *	For non-MLO the callback will be called once for the deflink with the
  *	station's directory rather than a separate subdirectory.
@@ -5256,7 +5282,8 @@ struct ieee80211_mutable_offsets {
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @offs: &struct ieee80211_mutable_offsets pointer to struct that will
  *	receive the offsets that may be updated by the driver.
- * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP)
+ * @link_id: the link id to which the beacon belongs (or 0 for an AP STA
+ *	that is not associated with AP MLD).
  *
  * If the driver implements beaconing modes, it must use this function to
  * obtain the beacon template.
@@ -5353,7 +5380,8 @@ void ieee80211_beacon_free_ema_list(struct ieee80211_ema_beacons *ema_beacons);
  * @tim_length: pointer to variable that will receive the TIM IE length,
  *	(including the ID and length bytes!).
  *	Set to 0 if invalid (in non-AP modes).
- * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP)
+ * @link_id: the link id to which the beacon belongs (or 0 for an AP STA
+ *	that is not associated with AP MLD).
  *
  * If the driver implements beaconing modes, it must use this function to
  * obtain the beacon frame.
@@ -5376,7 +5404,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
  * ieee80211_beacon_get - beacon generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
- * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP)
+ * @link_id: the link id to which the beacon belongs (or 0 for an AP STA
+ *	that is not associated with AP MLD).
  *
  * See ieee80211_beacon_get_tim().
  *
@@ -6867,6 +6896,48 @@ ieee80211_vif_type_p2p(struct ieee80211_vif *vif)
 }
 
 /**
+ * ieee80211_get_he_iftype_cap_vif - return HE capabilities for sband/vif
+ * @sband: the sband to search for the iftype on
+ * @vif: the vif to get the iftype from
+ *
+ * Return: pointer to the struct ieee80211_sta_he_cap, or %NULL is none found
+ */
+static inline const struct ieee80211_sta_he_cap *
+ieee80211_get_he_iftype_cap_vif(const struct ieee80211_supported_band *sband,
+				struct ieee80211_vif *vif)
+{
+	return ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif));
+}
+
+/**
+ * ieee80211_get_he_6ghz_capa_vif - return HE 6 GHz capabilities
+ * @sband: the sband to search for the STA on
+ * @vif: the vif to get the iftype from
+ *
+ * Return: the 6GHz capabilities
+ */
+static inline __le16
+ieee80211_get_he_6ghz_capa_vif(const struct ieee80211_supported_band *sband,
+			       struct ieee80211_vif *vif)
+{
+	return ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif));
+}
+
+/**
+ * ieee80211_get_eht_iftype_cap_vif - return ETH capabilities for sband/vif
+ * @sband: the sband to search for the iftype on
+ * @vif: the vif to get the iftype from
+ *
+ * Return: pointer to the struct ieee80211_sta_eht_cap, or %NULL is none found
+ */
+static inline const struct ieee80211_sta_eht_cap *
+ieee80211_get_eht_iftype_cap_vif(const struct ieee80211_supported_band *sband,
+				 struct ieee80211_vif *vif)
+{
+	return ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif));
+}
+
+/**
  * ieee80211_update_mu_groups - set the VHT MU-MIMO groud data
  *
  * @vif: the specified virtual interface
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index 896191f420d5..b2cb4a9eb04d 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -140,17 +140,6 @@ struct regulatory_request {
  *      otherwise initiating radiation is not allowed. This will enable the
  *      relaxations enabled under the CFG80211_REG_RELAX_NO_IR configuration
  *      option
- * @REGULATORY_IGNORE_STALE_KICKOFF: the regulatory core will _not_ make sure
- *	all interfaces on this wiphy reside on allowed channels. If this flag
- *	is not set, upon a regdomain change, the interfaces are given a grace
- *	period (currently 60 seconds) to disconnect or move to an allowed
- *	channel. Interfaces on forbidden channels are forcibly disconnected.
- *	Currently these types of interfaces are supported for enforcement:
- *	NL80211_IFTYPE_ADHOC, NL80211_IFTYPE_STATION, NL80211_IFTYPE_AP,
- *	NL80211_IFTYPE_AP_VLAN, NL80211_IFTYPE_MONITOR,
- *	NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO,
- *	NL80211_IFTYPE_P2P_DEVICE. The flag will be set by default if a device
- *	includes any modes unsupported for enforcement checking.
  * @REGULATORY_WIPHY_SELF_MANAGED: for devices that employ wiphy-specific
  *	regdom management. These devices will ignore all regdom changes not
  *	originating from their own wiphy.
@@ -177,7 +166,7 @@ enum ieee80211_regulatory_flags {
 	REGULATORY_COUNTRY_IE_FOLLOW_POWER	= BIT(3),
 	REGULATORY_COUNTRY_IE_IGNORE		= BIT(4),
 	REGULATORY_ENABLE_RELAX_NO_IR           = BIT(5),
-	REGULATORY_IGNORE_STALE_KICKOFF         = BIT(6),
+	/* reuse bit 6 next time */
 	REGULATORY_WIPHY_SELF_MANAGED		= BIT(7),
 };
 
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index c59fec406da5..88eb85c63029 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2022 Intel Corporation
+ * Copyright (C) 2018-2023 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -1309,6 +1309,11 @@
  *	The number of peers that HW timestamping can be enabled for concurrently
  *	is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS.
  *
+ * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD
+ *	setup links due to AP MLD removing the corresponding affiliated APs with
+ *	Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
+ *	information about the removed STA MLD setup links.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1562,6 +1567,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_HW_TIMESTAMP,
 
+	NL80211_CMD_LINKS_REMOVED,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2805,6 +2812,9 @@ enum nl80211_commands {
  *	index. If the userspace includes more RNR elements than number of
  *	MBSSID elements then these will be added in every EMA beacon.
  *
+ * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
+ *	disabled.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3341,6 +3351,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_EMA_RNR_ELEMS,
 
+	NL80211_ATTR_MLO_LINK_DISABLED,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3667,6 +3679,13 @@ enum nl80211_eht_ru_alloc {
  *	(u8, see &enum nl80211_eht_gi)
  * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then
  *	non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)
+ * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10)
+ * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4)
+ * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate
+ * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate
+ * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate
+ * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate
+ * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -3693,6 +3712,13 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_EHT_NSS,
 	NL80211_RATE_INFO_EHT_GI,
 	NL80211_RATE_INFO_EHT_RU_ALLOC,
+	NL80211_RATE_INFO_S1G_MCS,
+	NL80211_RATE_INFO_S1G_NSS,
+	NL80211_RATE_INFO_1_MHZ_WIDTH,
+	NL80211_RATE_INFO_2_MHZ_WIDTH,
+	NL80211_RATE_INFO_4_MHZ_WIDTH,
+	NL80211_RATE_INFO_8_MHZ_WIDTH,
+	NL80211_RATE_INFO_16_MHZ_WIDTH,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -4424,6 +4450,7 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
  * @NL80211_RRF_NO_HE: HE operation not allowed
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
+ * @NL80211_RRF_NO_EHT: EHT operation not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4443,6 +4470,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_160MHZ		= 1<<16,
 	NL80211_RRF_NO_HE		= 1<<17,
 	NL80211_RRF_NO_320MHZ		= 1<<18,
+	NL80211_RRF_NO_EHT		= 1<<19,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR