summaryrefslogtreecommitdiff
path: root/net/batman-adv/bat_v_elp.c
diff options
context:
space:
mode:
authorAntonio Quartulli <antonio@open-mesh.com>2015-11-10 20:50:51 +0300
committerAntonio Quartulli <a@unstable.cc>2016-02-29 11:25:06 +0300
commitc833484e5f3872a38fe232c663586069d5ad9645 (patch)
treed4ab62093f50a411de1fb0ed6bef90634fbe61b1 /net/batman-adv/bat_v_elp.c
parent95d392784dd0a51e4216e075f04a68c922745985 (diff)
downloadlinux-c833484e5f3872a38fe232c663586069d5ad9645.tar.xz
batman-adv: ELP - compute the metric based on the estimated throughput
In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Diffstat (limited to 'net/batman-adv/bat_v_elp.c')
-rw-r--r--net/batman-adv/bat_v_elp.c140
1 files changed, 140 insertions, 0 deletions
diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index 1e4d13cc267f..8376730ebd69 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -22,19 +22,23 @@
#include <linux/byteorder/generic.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/fs.h>
#include <linux/if_ether.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
+#include <linux/kref.h>
#include <linux/netdevice.h>
#include <linux/random.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
+#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
+#include <net/cfg80211.h>
#include "bat_algo.h"
#include "bat_v_ogm.h"
@@ -60,6 +64,107 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
}
/**
+ * batadv_v_elp_get_throughput - get the throughput towards a neighbour
+ * @neigh: the neighbour for which the throughput has to be obtained
+ *
+ * Return: The throughput towards the given neighbour in multiples of 100kpbs
+ * (a value of '1' equals to 0.1Mbps, '10' equals 1Mbps, etc).
+ */
+static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
+{
+ struct batadv_hard_iface *hard_iface = neigh->if_incoming;
+ struct ethtool_link_ksettings link_settings;
+ struct station_info sinfo;
+ u32 throughput;
+ int ret;
+
+ /* if the user specified a customised value for this interface, then
+ * return it directly
+ */
+ throughput = atomic_read(&hard_iface->bat_v.throughput_override);
+ if (throughput != 0)
+ return throughput;
+
+ /* if this is a wireless device, then ask its throughput through
+ * cfg80211 API
+ */
+ if (batadv_is_wifi_netdev(hard_iface->net_dev)) {
+ if (hard_iface->net_dev->ieee80211_ptr) {
+ ret = cfg80211_get_station(hard_iface->net_dev,
+ neigh->addr, &sinfo);
+ if (ret == -ENOENT) {
+ /* Node is not associated anymore! It would be
+ * possible to delete this neighbor. For now set
+ * the throughput metric to 0.
+ */
+ return 0;
+ }
+ if (!ret)
+ return sinfo.expected_throughput / 100;
+ }
+
+ /* unsupported WiFi driver version */
+ goto default_throughput;
+ }
+
+ /* if not a wifi interface, check if this device provides data via
+ * ethtool (e.g. an Ethernet adapter)
+ */
+ memset(&link_settings, 0, sizeof(link_settings));
+ rtnl_lock();
+ ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings);
+ rtnl_unlock();
+ if (ret == 0) {
+ /* link characteristics might change over time */
+ if (link_settings.base.duplex == DUPLEX_FULL)
+ hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
+ else
+ hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
+
+ throughput = link_settings.base.speed;
+ if (throughput && (throughput != SPEED_UNKNOWN))
+ return throughput * 10;
+ }
+
+default_throughput:
+ if (!(hard_iface->bat_v.flags & BATADV_WARNING_DEFAULT)) {
+ batadv_info(hard_iface->soft_iface,
+ "WiFi driver or ethtool info does not provide information about link speeds on interface %s, therefore defaulting to hardcoded throughput values of %u.%1u Mbps. Consider overriding the throughput manually or checking your driver.\n",
+ hard_iface->net_dev->name,
+ BATADV_THROUGHPUT_DEFAULT_VALUE / 10,
+ BATADV_THROUGHPUT_DEFAULT_VALUE % 10);
+ hard_iface->bat_v.flags |= BATADV_WARNING_DEFAULT;
+ }
+
+ /* if none of the above cases apply, return the base_throughput */
+ return BATADV_THROUGHPUT_DEFAULT_VALUE;
+}
+
+/**
+ * batadv_v_elp_throughput_metric_update - worker updating the throughput metric
+ * of a single hop neighbour
+ * @work: the work queue item
+ */
+void batadv_v_elp_throughput_metric_update(struct work_struct *work)
+{
+ struct batadv_hardif_neigh_node_bat_v *neigh_bat_v;
+ struct batadv_hardif_neigh_node *neigh;
+
+ neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v,
+ metric_work);
+ neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node,
+ bat_v);
+
+ ewma_throughput_add(&neigh->bat_v.throughput,
+ batadv_v_elp_get_throughput(neigh));
+
+ /* decrement refcounter to balance increment performed before scheduling
+ * this task
+ */
+ batadv_hardif_neigh_put(neigh);
+}
+
+/**
* batadv_v_elp_periodic_work - ELP periodic task per interface
* @work: work queue item
*
@@ -67,6 +172,7 @@ static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
*/
static void batadv_v_elp_periodic_work(struct work_struct *work)
{
+ struct batadv_hardif_neigh_node *hardif_neigh;
struct batadv_hard_iface *hard_iface;
struct batadv_hard_iface_bat_v *bat_v;
struct batadv_elp_packet *elp_packet;
@@ -108,6 +214,31 @@ static void batadv_v_elp_periodic_work(struct work_struct *work)
atomic_inc(&hard_iface->bat_v.elp_seqno);
+ /* The throughput metric is updated on each sent packet. This way, if a
+ * node is dead and no longer sends packets, batman-adv is still able to
+ * react timely to its death.
+ *
+ * The throughput metric is updated by following these steps:
+ * 1) if the hard_iface is wifi => send a number of unicast ELPs for
+ * probing/sampling to each neighbor
+ * 2) update the throughput metric value of each neighbor (note that the
+ * value retrieved in this step might be 100ms old because the
+ * probing packets at point 1) could still be in the HW queue)
+ */
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(hardif_neigh, &hard_iface->neigh_list, list) {
+ if (!kref_get_unless_zero(&hardif_neigh->refcount))
+ continue;
+
+ /* Reading the estimated throughput from cfg80211 is a task that
+ * may sleep and that is not allowed in an rcu protected
+ * context. Therefore schedule a task for that.
+ */
+ queue_work(batadv_event_workqueue,
+ &hardif_neigh->bat_v.metric_work);
+ }
+ rcu_read_unlock();
+
restart_timer:
batadv_v_elp_start_timer(hard_iface);
out:
@@ -146,6 +277,15 @@ int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface)
atomic_set(&hard_iface->bat_v.elp_seqno, random_seqno);
atomic_set(&hard_iface->bat_v.elp_interval, 500);
+ /* assume full-duplex by default */
+ hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
+
+ /* warn the user (again) if there is no throughput data is available */
+ hard_iface->bat_v.flags &= ~BATADV_WARNING_DEFAULT;
+
+ if (batadv_is_wifi_netdev(hard_iface->net_dev))
+ hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
+
INIT_DELAYED_WORK(&hard_iface->bat_v.elp_wq,
batadv_v_elp_periodic_work);
batadv_v_elp_start_timer(hard_iface);