Merge tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.8

The second features pull request for v6.8. A bigger one this time with
changes both to stack and drivers. We have a new Wifi band RFI (WBRF)
mitigation feature for which we pulled an immutable branch shared with
other subsystems. And, as always, other new features and bug fixes all
over.

Major changes:

cfg80211/mac80211
 * AMD ACPI based Wifi band RFI (WBRF) mitigation feature
 * Basic Service Set (BSS) usage reporting
 * TID to link mapping support
 * mac80211 hardware flag to disallow puncturing

iwlwifi
 * new debugfs file fw_dbg_clear

mt76
 * NVMEM EEPROM improvements
 * mt7996 Extremely High Throughpu (EHT) improvements
 * mt7996 Wireless Ethernet Dispatcher (WED) support
 * mt7996 36-bit DMA support

ath12k
 * support one MSI vector
 * WCN7850: support AP mode

* tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
  wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings
  wifi: ath11k: workaround too long expansion sparse warnings
  Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ"
  wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor()
  wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up
  wifi: rtw89: add DBCC H2C to notify firmware the status
  wifi: rtw89: mac: add suffix _ax to MAC functions
  wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled
  wifi: rtw89: 8922a: add power on/off functions
  wifi: rtw89: add XTAL SI for WiFi 7 chips
  wifi: rtw89: phy: print out RFK log with formatted string
  wifi: rtw89: parse and print out RFK log from C2H events
  wifi: rtw89: add C2H event handlers of RFK log and report
  wifi: rtw89: load RFK log format string from firmware file
  wifi: rtw89: fw: add version field to BB MCU firmware element
  wifi: rtw89: fw: load TX power track tables from fw_element
  wifi: mwifiex: configure BSSID consistently when starting AP
  wifi: mwifiex: add extra delay for firmware ready
  wifi: mac80211: sta_info.c: fix sentence grammar
  wifi: mac80211: rx.c: fix sentence grammar
  ...
====================

Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 89 insertions, 19 deletions

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 9e5ccffd6868..3d260c99c348 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1535,12 +1535,13 @@ static bool cfg80211_bss_type_match(u16 capability,
 }
 
 /* Returned bss is reference counted and must be cleaned up appropriately. */
-struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
-				      struct ieee80211_channel *channel,
-				      const u8 *bssid,
-				      const u8 *ssid, size_t ssid_len,
-				      enum ieee80211_bss_type bss_type,
-				      enum ieee80211_privacy privacy)
+struct cfg80211_bss *__cfg80211_get_bss(struct wiphy *wiphy,
+					struct ieee80211_channel *channel,
+					const u8 *bssid,
+					const u8 *ssid, size_t ssid_len,
+					enum ieee80211_bss_type bss_type,
+					enum ieee80211_privacy privacy,
+					u32 use_for)
 {
 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
 	struct cfg80211_internal_bss *bss, *res = NULL;
@@ -1565,6 +1566,8 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
 			continue;
 		if (!is_valid_ether_addr(bss->pub.bssid))
 			continue;
+		if ((bss->pub.use_for & use_for) != use_for)
+			continue;
 		/* Don't get expired BSS structs */
 		if (time_after(now, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE) &&
 		    !atomic_read(&bss->hold))
@@ -1582,7 +1585,7 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
 	trace_cfg80211_return_bss(&res->pub);
 	return &res->pub;
 }
-EXPORT_SYMBOL(cfg80211_get_bss);
+EXPORT_SYMBOL(__cfg80211_get_bss);
 
 static void rb_insert_bss(struct cfg80211_registered_device *rdev,
 			  struct cfg80211_internal_bss *bss)
@@ -1746,7 +1749,9 @@ cfg80211_update_known_bss(struct cfg80211_registered_device *rdev,
 				   new->pub.proberesp_ies);
 		if (old)
 			kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head);
-	} else if (rcu_access_pointer(new->pub.beacon_ies)) {
+	}
+
+	if (rcu_access_pointer(new->pub.beacon_ies)) {
 		const struct cfg80211_bss_ies *old;
 
 		if (known->pub.hidden_beacon_bss &&
@@ -1800,6 +1805,8 @@ cfg80211_update_known_bss(struct cfg80211_registered_device *rdev,
 	ether_addr_copy(known->parent_bssid, new->parent_bssid);
 	known->pub.max_bssid_indicator = new->pub.max_bssid_indicator;
 	known->pub.bssid_index = new->pub.bssid_index;
+	known->pub.use_for &= new->pub.use_for;
+	known->pub.cannot_use_reasons = new->pub.cannot_use_reasons;
 
 	return true;
 }
@@ -2044,6 +2051,9 @@ struct cfg80211_inform_single_bss_data {
 	struct cfg80211_bss *source_bss;
 	u8 max_bssid_indicator;
 	u8 bssid_index;
+
+	u8 use_for;
+	u64 cannot_use_reasons;
 };
 
 /* Returned bss is reference counted and must be cleaned up appropriately. */
@@ -2089,6 +2099,8 @@ cfg80211_inform_single_bss_data(struct wiphy *wiphy,
 	tmp.ts_boottime = drv_data->boottime_ns;
 	tmp.parent_tsf = drv_data->parent_tsf;
 	ether_addr_copy(tmp.parent_bssid, drv_data->parent_bssid);
+	tmp.pub.use_for = data->use_for;
+	tmp.pub.cannot_use_reasons = data->cannot_use_reasons;
 
 	if (data->bss_source != BSS_SOURCE_DIRECT) {
 		tmp.pub.transmitted_bss = data->source_bss;
@@ -2259,6 +2271,8 @@ cfg80211_parse_mbssid_data(struct wiphy *wiphy,
 		.beacon_interval = tx_data->beacon_interval,
 		.source_bss = source_bss,
 		.bss_source = BSS_SOURCE_MBSSID,
+		.use_for = tx_data->use_for,
+		.cannot_use_reasons = tx_data->cannot_use_reasons,
 	};
 	const u8 *mbssid_index_ie;
 	const struct element *elem, *sub;
@@ -2521,7 +2535,7 @@ error:
 	return NULL;
 }
 
-static bool
+static u8
 cfg80211_tbtt_info_for_mld_ap(const u8 *ie, size_t ielen, u8 mld_id, u8 link_id,
 			      const struct ieee80211_neighbor_ap_info **ap_info,
 			      const u8 **tbtt_info)
@@ -2540,6 +2554,7 @@ cfg80211_tbtt_info_for_mld_ap(const u8 *ie, size_t ielen, u8 mld_id, u8 link_id,
 			u16 params;
 			u8 length, i, count, mld_params_offset;
 			u8 type, lid;
+			u32 use_for;
 
 			info = (void *)pos;
 			count = u8_get_bits(info->tbtt_info_hdr,
@@ -2549,20 +2564,22 @@ cfg80211_tbtt_info_for_mld_ap(const u8 *ie, size_t ielen, u8 mld_id, u8 link_id,
 			pos += sizeof(*info);
 
 			if (count * length > end - pos)
-				return false;
+				return 0;
 
 			type = u8_get_bits(info->tbtt_info_hdr,
 					   IEEE80211_AP_INFO_TBTT_HDR_TYPE);
 
-			/* Only accept full TBTT information. NSTR mobile APs
-			 * use the shortened version, but we ignore them here.
-			 */
 			if (type == IEEE80211_TBTT_INFO_TYPE_TBTT &&
 			    length >=
 			    offsetofend(struct ieee80211_tbtt_info_ge_11,
 					mld_params)) {
 				mld_params_offset =
 					offsetof(struct ieee80211_tbtt_info_ge_11, mld_params);
+				use_for = NL80211_BSS_USE_FOR_ALL;
+			} else if (type == IEEE80211_TBTT_INFO_TYPE_MLD &&
+				   length >= sizeof(struct ieee80211_rnr_mld_params)) {
+				mld_params_offset = 0;
+				use_for = NL80211_BSS_USE_FOR_MLD_LINK;
 			} else {
 				pos += count * length;
 				continue;
@@ -2580,7 +2597,7 @@ cfg80211_tbtt_info_for_mld_ap(const u8 *ie, size_t ielen, u8 mld_id, u8 link_id,
 					*ap_info = info;
 					*tbtt_info = pos;
 
-					return true;
+					return use_for;
 				}
 
 				pos += length;
@@ -2588,7 +2605,7 @@ cfg80211_tbtt_info_for_mld_ap(const u8 *ie, size_t ielen, u8 mld_id, u8 link_id,
 		}
 	}
 
-	return false;
+	return 0;
 }
 
 static void cfg80211_parse_ml_sta_data(struct wiphy *wiphy,
@@ -2606,6 +2623,7 @@ static void cfg80211_parse_ml_sta_data(struct wiphy *wiphy,
 	const struct element *elem;
 	struct cfg80211_mle *mle;
 	u16 control;
+	u8 ml_common_len;
 	u8 *new_ie;
 	struct cfg80211_bss *bss;
 	int mld_id;
@@ -2636,6 +2654,8 @@ static void cfg80211_parse_ml_sta_data(struct wiphy *wiphy,
 	    !(control & IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP))
 		return;
 
+	ml_common_len = ml_elem->variable[0];
+
 	/* length + MLD MAC address + link ID info + BSS Params Change Count */
 	pos = ml_elem->variable + 1 + 6 + 1 + 1;
 
@@ -2676,7 +2696,7 @@ static void cfg80211_parse_ml_sta_data(struct wiphy *wiphy,
 		const u8 *profile;
 		const u8 *tbtt_info;
 		ssize_t profile_len;
-		u8 link_id;
+		u8 link_id, use_for;
 
 		if (!ieee80211_mle_basic_sta_prof_size_ok((u8 *)mle->sta_prof[i],
 							  mle->sta_prof_len[i]))
@@ -2718,9 +2738,11 @@ static void cfg80211_parse_ml_sta_data(struct wiphy *wiphy,
 		profile_len -= 2;
 
 		/* Find in RNR to look up channel information */
-		if (!cfg80211_tbtt_info_for_mld_ap(tx_data->ie, tx_data->ielen,
-						   mld_id, link_id,
-						   &ap_info, &tbtt_info))
+		use_for = cfg80211_tbtt_info_for_mld_ap(tx_data->ie,
+							tx_data->ielen,
+							mld_id, link_id,
+							&ap_info, &tbtt_info);
+		if (!use_for)
 			continue;
 
 		/* We could sanity check the BSSID is included */
@@ -2732,6 +2754,14 @@ static void cfg80211_parse_ml_sta_data(struct wiphy *wiphy,
 		freq = ieee80211_channel_to_freq_khz(ap_info->channel, band);
 		data.channel = ieee80211_get_channel_khz(wiphy, freq);
 
+		if (use_for == NL80211_BSS_USE_FOR_MLD_LINK &&
+		    !(wiphy->flags & WIPHY_FLAG_SUPPORTS_NSTR_NONPRIMARY)) {
+			use_for = 0;
+			data.cannot_use_reasons =
+				NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY;
+		}
+		data.use_for = use_for;
+
 		/* Generate new elements */
 		memset(new_ie, 0, IEEE80211_MAX_DATA_LEN);
 		data.ie = new_ie;
@@ -2742,6 +2772,34 @@ static void cfg80211_parse_ml_sta_data(struct wiphy *wiphy,
 		if (!data.ielen)
 			continue;
 
+		/* The generated elements do not contain:
+		 *  - Basic ML element
+		 *  - A TBTT entry in the RNR for the transmitting AP
+		 *
+		 * This information is needed both internally and in userspace
+		 * as such, we should append it here.
+		 */
+		if (data.ielen + 3 + sizeof(*ml_elem) + ml_common_len >
+		    IEEE80211_MAX_DATA_LEN)
+			continue;
+
+		/* Copy the Basic Multi-Link element including the common
+		 * information, and then fix up the link ID.
+		 * Note that the ML element length has been verified and we
+		 * also checked that it contains the link ID.
+		 */
+		new_ie[data.ielen++] = WLAN_EID_EXTENSION;
+		new_ie[data.ielen++] = 1 + sizeof(*ml_elem) + ml_common_len;
+		new_ie[data.ielen++] = WLAN_EID_EXT_EHT_MULTI_LINK;
+		memcpy(new_ie + data.ielen, ml_elem,
+		       sizeof(*ml_elem) + ml_common_len);
+
+		new_ie[data.ielen + sizeof(*ml_elem) + 1 + ETH_ALEN] = link_id;
+
+		data.ielen += sizeof(*ml_elem) + ml_common_len;
+
+		/* TODO: Add an RNR containing only the reporting AP */
+
 		bss = cfg80211_inform_single_bss_data(wiphy, &data, gfp);
 		if (!bss)
 			break;
@@ -2769,6 +2827,10 @@ cfg80211_inform_bss_data(struct wiphy *wiphy,
 		.beacon_interval = beacon_interval,
 		.ie = ie,
 		.ielen = ielen,
+		.use_for = data->restrict_use ?
+				data->use_for :
+				NL80211_BSS_USE_FOR_ALL,
+		.cannot_use_reasons = data->cannot_use_reasons,
 	};
 	struct cfg80211_bss *res;
 
@@ -2899,6 +2961,10 @@ cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy,
 	tmp.pub.chains = data->chains;
 	memcpy(tmp.pub.chain_signal, data->chain_signal, IEEE80211_MAX_CHAINS);
 	ether_addr_copy(tmp.parent_bssid, data->parent_bssid);
+	tmp.pub.use_for = data->restrict_use ?
+				data->use_for :
+				NL80211_BSS_USE_FOR_ALL;
+	tmp.pub.cannot_use_reasons = data->cannot_use_reasons;
 
 	signal_valid = data->chan == channel;
 	spin_lock_bh(&rdev->bss_lock);
@@ -2930,6 +2996,10 @@ cfg80211_inform_bss_frame_data(struct wiphy *wiphy,
 		.ie = mgmt->u.probe_resp.variable,
 		.ielen = len - offsetof(struct ieee80211_mgmt,
 					u.probe_resp.variable),
+		.use_for = data->restrict_use ?
+				data->use_for :
+				NL80211_BSS_USE_FOR_ALL,
+		.cannot_use_reasons = data->cannot_use_reasons,
 	};
 	struct cfg80211_bss *res;