Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - bpf:
        - allow bpf programs calling kernel functions (initially to
          reuse TCP congestion control implementations)
        - enable task local storage for tracing programs - remove the
          need to store per-task state in hash maps, and allow tracing
          programs access to task local storage previously added for
          BPF_LSM
        - add bpf_for_each_map_elem() helper, allowing programs to walk
          all map elements in a more robust and easier to verify fashion
        - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
          redirection
        - lpm: add support for batched ops in LPM trie
        - add BTF_KIND_FLOAT support - mostly to allow use of BTF on
          s390 which has floats in its headers files
        - improve BPF syscall documentation and extend the use of kdoc
          parsing scripts we already employ for bpf-helpers
        - libbpf, bpftool: support static linking of BPF ELF files
        - improve support for encapsulation of L2 packets

   - xdp: restructure redirect actions to avoid a runtime lookup,
     improving performance by 4-8% in microbenchmarks

   - xsk: build skb by page (aka generic zerocopy xmit) - improve
     performance of software AF_XDP path by 33% for devices which don't
     need headers in the linear skb part (e.g. virtio)

   - nexthop: resilient next-hop groups - improve path stability on
     next-hops group changes (incl. offload for mlxsw)

   - ipv6: segment routing: add support for IPv4 decapsulation

   - icmp: add support for RFC 8335 extended PROBE messages

   - inet: use bigger hash table for IP ID generation

   - tcp: deal better with delayed TX completions - make sure we don't
     give up on fast TCP retransmissions only because driver is slow in
     reporting that it completed transmitting the original

   - tcp: reorder tcp_congestion_ops for better cache locality

   - mptcp:
        - add sockopt support for common TCP options
        - add support for common TCP msg flags
        - include multiple address ids in RM_ADDR
        - add reset option support for resetting one subflow

   - udp: GRO L4 improvements - improve 'forward' / 'frag_list'
     co-existence with UDP tunnel GRO, allowing the first to take place
     correctly even for encapsulated UDP traffic

   - micro-optimize dev_gro_receive() and flow dissection, avoid
     retpoline overhead on VLAN and TEB GRO

   - use less memory for sysctls, add a new sysctl type, to allow using
     u8 instead of "int" and "long" and shrink networking sysctls

   - veth: allow GRO without XDP - this allows aggregating UDP packets
     before handing them off to routing, bridge, OvS, etc.

   - allow specifing ifindex when device is moved to another namespace

   - netfilter:
        - nft_socket: add support for cgroupsv2
        - nftables: add catch-all set element - special element used to
          define a default action in case normal lookup missed
        - use net_generic infra in many modules to avoid allocating
          per-ns memory unnecessarily

   - xps: improve the xps handling to avoid potential out-of-bound
     accesses and use-after-free when XPS change race with other
     re-configuration under traffic

   - add a config knob to turn off per-cpu netdev refcnt to catch
     underflows in testing

  Device APIs:

   - add WWAN subsystem to organize the WWAN interfaces better and
     hopefully start driving towards more unified and vendor-
     independent APIs

   - ethtool:
        - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
          support)
        - allow network drivers to dump arbitrary SFP EEPROM data,
          current offset+length API was a poor fit for modern SFP which
          define EEPROM in terms of pages (incl. mlx5 support)

   - act_police, flow_offload: add support for packet-per-second
     policing (incl. offload for nfp)

   - psample: add additional metadata attributes like transit delay for
     packets sampled from switch HW (and corresponding egress and
     policy-based sampling in the mlxsw driver)

   - dsa: improve support for sandwiched LAGs with bridge and DSA

   - netfilter:
        - flowtable: use direct xmit in topologies with IP forwarding,
          bridging, vlans etc.
        - nftables: counter hardware offload support

   - Bluetooth:
        - improvements for firmware download w/ Intel devices
        - add support for reading AOSP vendor capabilities
        - add support for virtio transport driver

   - mac80211:
        - allow concurrent monitor iface and ethernet rx decap
        - set priority and queue mapping for injected frames

   - phy: add support for Clause-45 PHY Loopback

   - pci/iov: add sysfs MSI-X vector assignment interface to distribute
     MSI-X resources to VFs (incl. mlx5 support)

  New hardware/drivers:

   - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
     Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
     interfaces.

   - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
     BCM63xx switches

   - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

   - ath11k: support for QCN9074 a 802.11ax device

   - Bluetooth: Broadcom BCM4330 and BMC4334

   - phy: Marvell 88X2222 transceiver support

   - mdio: add BCM6368 MDIO mux bus controller

   - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

   - mana: driver for Microsoft Azure Network Adapter (MANA)

   - Actions Semi Owl Ethernet MAC

   - can: driver for ETAS ES58X CAN/USB interfaces

  Pure driver changes:

   - add XDP support to: enetc, igc, stmmac

   - add AF_XDP support to: stmmac

   - virtio:
        - page_to_skb() use build_skb when there's sufficient tailroom
          (21% improvement for 1000B UDP frames)
        - support XDP even without dedicated Tx queues - share the Tx
          queues with the stack when necessary

   - mlx5:
        - flow rules: add support for mirroring with conntrack, matching
          on ICMP, GTP, flex filters and more
        - support packet sampling with flow offloads
        - persist uplink representor netdev across eswitch mode changes
        - allow coexistence of CQE compression and HW time-stamping
        - add ethtool extended link error state reporting

   - ice, iavf: support flow filters, UDP Segmentation Offload

   - dpaa2-switch:
        - move the driver out of staging
        - add spanning tree (STP) support
        - add rx copybreak support
        - add tc flower hardware offload on ingress traffic

   - ionic:
        - implement Rx page reuse
        - support HW PTP time-stamping

   - octeon: support TC hardware offloads - flower matching on ingress
     and egress ratelimitting.

   - stmmac:
        - add RX frame steering based on VLAN priority in tc flower
        - support frame preemption (FPE)
        - intel: add cross time-stamping freq difference adjustment

   - ocelot:
        - support forwarding of MRP frames in HW
        - support multiple bridges
        - support PTP Sync one-step timestamping

   - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
     learning, flooding etc.

   - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
     SC7280 SoCs)

   - mt7601u: enable TDLS support

   - mt76:
        - add support for 802.3 rx frames (mt7915/mt7615)
        - mt7915 flash pre-calibration support
        - mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
  net: selftest: fix build issue if INET is disabled
  net: netrom: nr_in: Remove redundant assignment to ns
  net: tun: Remove redundant assignment to ret
  net: phy: marvell: add downshift support for M88E1240
  net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
  net/sched: act_ct: Remove redundant ct get and check
  icmp: standardize naming of RFC 8335 PROBE constants
  bpf, selftests: Update array map tests for per-cpu batched ops
  bpf: Add batched ops support for percpu array
  bpf: Implement formatted output helpers with bstr_printf
  seq_file: Add a seq_bprintf function
  sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
  net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
  net: fix a concurrency bug in l2tp_tunnel_register()
  net/smc: Remove redundant assignment to rc
  mpls: Remove redundant assignment to err
  llc2: Remove redundant assignment to rc
  net/tls: Remove redundant initialization of record
  rds: Remove redundant assignment to nr_sig
  dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
  ...

11 files changed, 110 insertions, 70 deletions

diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst
index f9c53ca5cf93..f4adeed5f5f0 100644
--- a/samples/pktgen/README.rst
+++ b/samples/pktgen/README.rst
@@ -28,10 +28,28 @@ across the sample scripts.  Usage example is printed on errors::
   -b : ($BURST)     HW level bursting of SKBs
   -v : ($VERBOSE)   verbose
   -x : ($DEBUG)     debug
+  -6 : ($IP6)       IPv6
+  -w : ($DELAY)     Tx Delay value (ns)
+  -a : ($APPEND)    Script will not reset generator's state, but will append its config
 
 The global variable being set is also listed.  E.g. the required
 interface/device parameter "-i" sets variable $DEV.
 
+"-a" parameter may be used to create different flows simultaneously.
+In this mode script will keep the existing config, will append its settings.
+In this mode you'll have to manually run traffic with "pg_ctrl start".
+
+For example you may use:
+
+    source ./samples/pktgen/functions.sh
+    pg_ctrl reset
+    # add first device
+    ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f0 -m 34:80:0d:a3:fc:c9 -t 8
+    # add second device
+    ./pktgen_sample06_numa_awared_queue_irq_affinity.sh -a -i ens1f1 -m 34:80:0d:a3:fc:c9 -t 8
+    # run joint traffic on two devs
+    pg_ctrl start
+
 Common functions
 ----------------
 The functions.sh file provides; Three different shell functions for
diff --git a/samples/pktgen/functions.sh b/samples/pktgen/functions.sh
index dae06d5b38fa..a335393157eb 100644
--- a/samples/pktgen/functions.sh
+++ b/samples/pktgen/functions.sh
@@ -108,7 +108,12 @@ function pgset() {
     fi
 }
 
-[[ $EUID -eq 0 ]] && trap 'pg_ctrl "reset"' EXIT
+if [[ -z "$APPEND" ]]; then
+	if [[ $EUID -eq 0 ]]; then
+		# Cleanup pktgen setup on exit if thats not "append mode"
+		trap 'pg_ctrl "reset"' EXIT
+	fi
+fi
 
 ## -- General shell tricks --
 
diff --git a/samples/pktgen/parameters.sh b/samples/pktgen/parameters.sh
index ff0ed474fee9..b4c1b371e4b8 100644
--- a/samples/pktgen/parameters.sh
+++ b/samples/pktgen/parameters.sh
@@ -19,12 +19,14 @@ function usage() {
     echo "  -v : (\$VERBOSE)   verbose"
     echo "  -x : (\$DEBUG)     debug"
     echo "  -6 : (\$IP6)       IPv6"
+    echo "  -w : (\$DELAY)     Tx Delay value (ns)"
+    echo "  -a : (\$APPEND)    Script will not reset generator's state, but will append its config"
     echo ""
 }
 
 ##  --- Parse command line arguments / parameters ---
 ## echo "Commandline options:"
-while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
+while getopts "s:i:d:m:p:f:t:c:n:b:w:vxh6a" option; do
     case $option in
         i) # interface
           export DEV=$OPTARG
@@ -66,6 +68,10 @@ while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
 	  export BURST=$OPTARG
 	  info "SKB bursting: BURST=$BURST"
           ;;
+        w)
+	  export DELAY=$OPTARG
+	  info "DELAY=$DELAY"
+          ;;
         v)
           export VERBOSE=yes
           info "Verbose mode: VERBOSE=$VERBOSE"
@@ -78,6 +84,10 @@ while getopts "s:i:d:m:p:f:t:c:n:b:vxh6" option; do
 	  export IP6=6
 	  info "IP6: IP6=$IP6"
 	  ;;
+        a)
+          export APPEND=yes
+          info "Append mode: APPEND=$APPEND"
+          ;;
         h|?|*)
           usage;
           err 2 "[ERROR] Unknown parameters!!!"
@@ -100,6 +110,9 @@ if [ -z "$THREADS" ]; then
     export THREADS=1
 fi
 
+# default DELAY
+[ -z "$DELAY" ] && export DELAY=0 # Zero means max speed
+
 export L_THREAD=$(( THREADS + F_THREAD - 1 ))
 
 if [ -z "$DEV" ]; then
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
index 1b6204125d2d..30a610b541ad 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
@@ -50,9 +50,6 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"        # Zero means max speed
-
 # General cleanup everything since last run
 pg_ctrl "reset"
 
diff --git a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
index e607cb369b20..a6195bd77532 100755
--- a/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
+++ b/samples/pktgen/pktgen_bench_xmit_mode_queue_xmit.sh
@@ -33,9 +33,6 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"        # Zero means max speed
-
 # General cleanup everything since last run
 pg_ctrl "reset"
 
diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh
index a4e250b45dce..a09f3422fbcc 100755
--- a/samples/pktgen/pktgen_sample01_simple.sh
+++ b/samples/pktgen/pktgen_sample01_simple.sh
@@ -31,20 +31,17 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"        # Zero means max speed
-
 # Flow variation random source port between min and max
 UDP_SRC_MIN=9
 UDP_SRC_MAX=109
 
 # General cleanup everything since last run
 # (especially important if other threads were configured by other scripts)
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Add remove all other devices and add_device $DEV to thread 0
 thread=0
-pg_thread $thread "rem_device_all"
+[ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
 pg_thread $thread "add_device" $DEV
 
 # How many packets to send (zero means indefinitely)
@@ -80,11 +77,15 @@ pg_set $DEV "flag UDPSRC_RND"
 pg_set $DEV "udp_src_min $UDP_SRC_MIN"
 pg_set $DEV "udp_src_max $UDP_SRC_MAX"
 
-# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+    # start_run
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
 
-# Print results
-echo "Result device: $DEV"
-cat /proc/net/pktgen/$DEV
+    # Print results
+    echo "Result device: $DEV"
+    cat /proc/net/pktgen/$DEV
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
\ No newline at end of file
diff --git a/samples/pktgen/pktgen_sample02_multiqueue.sh b/samples/pktgen/pktgen_sample02_multiqueue.sh
index cb2495fcdc60..acae8ede0d6c 100755
--- a/samples/pktgen/pktgen_sample02_multiqueue.sh
+++ b/samples/pktgen/pktgen_sample02_multiqueue.sh
@@ -17,7 +17,6 @@ source ${basedir}/parameters.sh
 [ -z "$COUNT" ] && COUNT="100000" # Zero means indefinitely
 
 # Base Config
-DELAY="0"        # Zero means max speed
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 
 # Flow variation random source port between min and max
@@ -39,7 +38,7 @@ if [ -n "$DST_PORT" ]; then
 fi
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
@@ -48,7 +47,7 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Notice config queue to map to cpu (mirrors smp_processor_id())
@@ -82,14 +81,18 @@ for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     pg_set $dev "udp_src_max $UDP_SRC_MAX"
 done
 
-# start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
+if [ -z "$APPEND" ]; then
+    # start_run
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
 
-# Print results
-for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
-    dev=${DEV}@${thread}
-    echo "Device: $dev"
-    cat /proc/net/pktgen/$dev | grep -A2 "Result:"
-done
+    # Print results
+    for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
+        dev=${DEV}@${thread}
+        echo "Device: $dev"
+        cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+    done
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample03_burst_single_flow.sh b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
index fff50765a5aa..5adcf954de73 100755
--- a/samples/pktgen/pktgen_sample03_burst_single_flow.sh
+++ b/samples/pktgen/pktgen_sample03_burst_single_flow.sh
@@ -42,18 +42,15 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"  # Zero means max speed
-
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -97,5 +94,9 @@ function control_c() {
 # trap keyboard interrupt (Ctrl-C)
 trap control_c SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample04_many_flows.sh b/samples/pktgen/pktgen_sample04_many_flows.sh
index 2cd6b701400d..ddce876635aa 100755
--- a/samples/pktgen/pktgen_sample04_many_flows.sh
+++ b/samples/pktgen/pktgen_sample04_many_flows.sh
@@ -34,9 +34,6 @@ fi
 [ -z "$FLOWS" ]     && FLOWS="8000"
 [ -z "$FLOWLEN" ]   && FLOWLEN="10"
 
-# Base Config
-DELAY="0"  # Zero means max speed
-
 if [[ -n "$BURST" ]]; then
     err 1 "Bursting not supported for this mode"
 fi
@@ -45,14 +42,14 @@ fi
 read -r SRC_MIN SRC_MAX <<< $(parse_addr 198.18.0.0/15)
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -107,7 +104,11 @@ function print_result() {
 # trap keyboard interrupt (Ctrl-C)
 trap true SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
 
-print_result
+    print_result
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample05_flow_per_thread.sh b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
index 4cb6252ade39..4a65fe2fcee9 100755
--- a/samples/pktgen/pktgen_sample05_flow_per_thread.sh
+++ b/samples/pktgen/pktgen_sample05_flow_per_thread.sh
@@ -31,18 +31,15 @@ if [ -n "$DST_PORT" ]; then
     validate_ports $UDP_DST_MIN $UDP_DST_MAX
 fi
 
-# Base Config
-DELAY="0"  # Zero means max speed
-
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
     dev=${DEV}@${thread}
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # Base config
@@ -91,7 +88,11 @@ function print_result() {
 # trap keyboard interrupt (Ctrl-C)
 trap true SIGINT
 
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
 
-print_result
+    print_result
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
diff --git a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
index 728106060a02..10f1da571f40 100755
--- a/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
+++ b/samples/pktgen/pktgen_sample06_numa_awared_queue_irq_affinity.sh
@@ -15,7 +15,6 @@ root_check_run_with_sudo "$@"
 source ${basedir}/parameters.sh
 
 # Base Config
-DELAY="0"        # Zero means max speed
 [ -z "$COUNT" ]     && COUNT="20000000"   # Zero means indefinitely
 [ -z "$CLONE_SKB" ] && CLONE_SKB="0"
 
@@ -45,7 +44,7 @@ if [ -n "$DST_PORT" ]; then
 fi
 
 # General cleanup everything since last run
-pg_ctrl "reset"
+[ -z "$APPEND" ] && pg_ctrl "reset"
 
 # Threads are specified with parameter -t value in $THREADS
 for ((i = 0; i < $THREADS; i++)); do
@@ -59,7 +58,7 @@ for ((i = 0; i < $THREADS; i++)); do
     info "irq ${irq_array[$i]} is set affinity to `cat /proc/irq/${irq_array[$i]}/smp_affinity_list`"
 
     # Add remove all other devices and add_device $dev to thread
-    pg_thread $thread "rem_device_all"
+    [ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
     pg_thread $thread "add_device" $dev
 
     # select queue and bind the queue and $dev in 1:1 relationship
@@ -100,14 +99,18 @@ for ((i = 0; i < $THREADS; i++)); do
 done
 
 # start_run
-echo "Running... ctrl^C to stop" >&2
-pg_ctrl "start"
-echo "Done" >&2
-
-# Print results
-for ((i = 0; i < $THREADS; i++)); do
-    thread=${cpu_array[$((i+F_THREAD))]}
-    dev=${DEV}@${thread}
-    echo "Device: $dev"
-    cat /proc/net/pktgen/$dev | grep -A2 "Result:"
-done
+if [ -z "$APPEND" ]; then
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
+
+    # Print results
+    for ((i = 0; i < $THREADS; i++)); do
+        thread=${cpu_array[$((i+F_THREAD))]}
+        dev=${DEV}@${thread}
+        echo "Device: $dev"
+        cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+    done
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi