ASoC: nau8825: AD/DA over sampling rate configuration

Over Sampling Rate (OSR) is defined as CLK_ADC frequency divided by the
audio sample rate (Fs).
OSR = CLK_ADC / FS
The available OSRs are 32, 64, 128 or 256. Note that the OSR and Fs
values must be selected such that the maximum frequency of CLK_ADC
is less than 6.144 MHz. It is recommended to match the relationship
between OSR and clock SRC according to following Table.
ADC_RATE: 00(OSR=32)  | CLK_ADC_SRC: 11(CODEC 1/8)
ADC_RATE: 01(OSR=64)  | CLK_ADC_SRC: 10(CODEC1/4)
ADC_RATE: 10(OSR=128) | CLK_ADC_SRC: 01(CODEC 1/2)
ADC_RATE: 11(OSR=256) | CLK_ADC_SRC: 00(CODEC CLK)

The over sampling rate about DAC follows the same rule with ADCs.
The driver changes the OSR to 64 value when initiation for better FLL
performance and applies the dynamic SRC change by different OSR.

Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 75 insertions, 3 deletions

diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
index 0db618b2f2b8..50cdb30297b4 100644
--- a/sound/soc/codecs/nau8825.c
+++ b/sound/soc/codecs/nau8825.c
@@ -43,6 +43,8 @@
 #define GAIN_AUGMENT 22500
 #define SIDETONE_BASE 207000
 
+/* the maximum frequency of CLK_ADC and CLK_DAC */
+#define CLK_DA_AD_MAX 6144000
 
 static int nau8825_configure_sysclk(struct nau8825 *nau8825,
 		int clk_id, unsigned int freq);
@@ -95,6 +97,27 @@ static const struct nau8825_fll_attr fll_pre_scalar[] = {
 	{ 8, 0x3 },
 };
 
+/* over sampling rate */
+struct nau8825_osr_attr {
+	unsigned int osr;
+	unsigned int clk_src;
+};
+
+static const struct nau8825_osr_attr osr_dac_sel[] = {
+	{ 64, 2 },	/* OSR 64, SRC 1/4 */
+	{ 256, 0 },	/* OSR 256, SRC 1 */
+	{ 128, 1 },	/* OSR 128, SRC 1/2 */
+	{ 0, 0 },
+	{ 32, 3 },	/* OSR 32, SRC 1/8 */
+};
+
+static const struct nau8825_osr_attr osr_adc_sel[] = {
+	{ 32, 3 },	/* OSR 32, SRC 1/8 */
+	{ 64, 2 },	/* OSR 64, SRC 1/4 */
+	{ 128, 1 },	/* OSR 128, SRC 1/2 */
+	{ 256, 0 },	/* OSR 256, SRC 1 */
+};
+
 static const struct reg_default nau8825_reg_defaults[] = {
 	{ NAU8825_REG_ENA_CTRL, 0x00ff },
 	{ NAU8825_REG_IIC_ADDR_SET, 0x0 },
@@ -1179,16 +1202,65 @@ static const struct snd_soc_dapm_route nau8825_dapm_routes[] = {
 	{"HPOR", NULL, "Class G"},
 };
 
+static int nau8825_clock_check(struct nau8825 *nau8825,
+	int stream, int rate, int osr)
+{
+	int osrate;
+
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (osr >= ARRAY_SIZE(osr_dac_sel))
+			return -EINVAL;
+		osrate = osr_dac_sel[osr].osr;
+	} else {
+		if (osr >= ARRAY_SIZE(osr_adc_sel))
+			return -EINVAL;
+		osrate = osr_adc_sel[osr].osr;
+	}
+
+	if (!osrate || rate * osr > CLK_DA_AD_MAX) {
+		dev_err(nau8825->dev, "exceed the maximum frequency of CLK_ADC or CLK_DAC\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int nau8825_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
 {
 	struct snd_soc_codec *codec = dai->codec;
 	struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
-	unsigned int val_len = 0;
+	unsigned int val_len = 0, osr;
 
 	nau8825_sema_acquire(nau8825, 2 * HZ);
 
+	/* CLK_DAC or CLK_ADC = OSR * FS
+	 * DAC or ADC clock frequency is defined as Over Sampling Rate (OSR)
+	 * multiplied by the audio sample rate (Fs). Note that the OSR and Fs
+	 * values must be selected such that the maximum frequency is less
+	 * than 6.144 MHz.
+	 */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		regmap_read(nau8825->regmap, NAU8825_REG_DAC_CTRL1, &osr);
+		osr &= NAU8825_DAC_OVERSAMPLE_MASK;
+		if (nau8825_clock_check(nau8825, substream->stream,
+			params_rate(params), osr))
+			return -EINVAL;
+		regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
+			NAU8825_CLK_DAC_SRC_MASK,
+			osr_dac_sel[osr].clk_src << NAU8825_CLK_DAC_SRC_SFT);
+	} else {
+		regmap_read(nau8825->regmap, NAU8825_REG_ADC_RATE, &osr);
+		osr &= NAU8825_ADC_SYNC_DOWN_MASK;
+		if (nau8825_clock_check(nau8825, substream->stream,
+			params_rate(params), osr))
+			return -EINVAL;
+		regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
+			NAU8825_CLK_ADC_SRC_MASK,
+			osr_adc_sel[osr].clk_src << NAU8825_CLK_ADC_SRC_SFT);
+	}
+
 	switch (params_width(params)) {
 	case 16:
 		val_len |= NAU8825_I2S_DL_16;
@@ -1774,9 +1846,9 @@ static void nau8825_init_regs(struct nau8825 *nau8825)
 	 * (audible hiss). Set it to something better.
 	 */
 	regmap_update_bits(regmap, NAU8825_REG_ADC_RATE,
-		NAU8825_ADC_SYNC_DOWN_MASK, NAU8825_ADC_SYNC_DOWN_128);
+		NAU8825_ADC_SYNC_DOWN_MASK, NAU8825_ADC_SYNC_DOWN_64);
 	regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
-		NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_128);
+		NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64);
 	/* Disable DACR/L power */
 	regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP,
 		NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,