summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/wm8903.c
diff options
context:
space:
mode:
authorStephen Warren <swarren@nvidia.com>2011-12-03 02:08:40 +0400
committerMark Brown <broonie@opensource.wolfsonmicro.com>2011-12-06 14:29:22 +0400
commit9d35f3e100eb5cfb91d777c8621fb585ad0327cd (patch)
tree79c105d52fc1e7960e23452441212853501f5d91 /sound/soc/codecs/wm8903.c
parentdb81778409227a0dc46ab95b95e1c7184ae9ef48 (diff)
downloadlinux-9d35f3e100eb5cfb91d777c8621fb585ad0327cd.tar.xz
ASoC: WM8903: Get default irq_active_low from IRQ controller
If the WM8903 is hooked up to an interrupt, set the irq_active_low flag in the default platform data based on the IRQ's IRQ_TYPE. Map IRQ_TYPE_NONE (a lack of explicit configuration/restriction) to irq_active_low = false; the previous default. This code is mainly added to support device tree interrupt bindings, although will work perfectly well in a non device tree system too. Any interrupt controller that supports only a single IRQ_TYPE could set each IRQ's type based on that restriction. This applies equally with and without device tree. To cater for interrupt controllers that don't do this, for which irqd_get_trigger_type() will return IRQ_TYPE_NONE, the platform data irq_active_low field may be used in systems that don't use device tree. With device tree, every IRQ must have some IRQ_TYPE set. Controllers that support DT and multiple IRQ_TYPEs must define the interrupts property (as used in interrupt source nodes) such that it defines the IRQ_TYPE to use. When the core DT setup code initializes wm8903->irq, the interrupts property will be parsed, and as a side- effect, set the IRQ's IRQ_TYPE for the WM8903 probe() function to read. Controllers that support DT and a single IRQ_TYPE could arrange to set the IRQ_TYPE somehow during their initialization, or hard-code it during the processing of the child interrupts property. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
-rw-r--r--sound/soc/codecs/wm8903.c40
1 files changed, 40 insertions, 0 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index b114468d6453..b4f2c906b2f3 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -25,6 +25,7 @@
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/slab.h>
+#include <linux/irq.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/pcm.h>
@@ -2036,6 +2037,39 @@ static const struct regmap_config wm8903_regmap = {
.num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults),
};
+static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c,
+ struct wm8903_platform_data *pdata)
+{
+ struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
+ if (!irq_data) {
+ dev_err(&i2c->dev, "Invalid IRQ: %d\n",
+ i2c->irq);
+ return -EINVAL;
+ }
+
+ switch (irqd_get_trigger_type(irq_data)) {
+ case IRQ_TYPE_NONE:
+ /*
+ * We assume the controller imposes no restrictions,
+ * so we are able to select active-high
+ */
+ /* Fall-through */
+ case IRQ_TYPE_LEVEL_HIGH:
+ pdata->irq_active_low = false;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ pdata->irq_active_low = true;
+ break;
+ default:
+ dev_err(&i2c->dev,
+ "Unsupported IRQ_TYPE %x\n",
+ irqd_get_trigger_type(irq_data));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -2071,6 +2105,12 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
dev_err(&i2c->dev, "Failed to allocate pdata\n");
return -ENOMEM;
}
+
+ if (i2c->irq) {
+ ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata);
+ if (ret != 0)
+ return ret;
+ }
}
ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val);