ASoC: Intel: sof_rt5682: cleanup unnecessary quirk flag

Remove SOF_RT5682_MCLK_24MHZ flag from JSL and CML/WHL board configs
since the information could be retrieved from SOF API. The macro
itself is removed as well.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 59 insertions, 63 deletions

diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c
index fae091b9b55c..b3e90794f4e6 100644
--- a/sound/soc/intel/boards/sof_rt5682.c
+++ b/sound/soc/intel/boards/sof_rt5682.c
@@ -34,7 +34,6 @@
 #define SOF_RT5682_SSP_CODEC(quirk)		((quirk) & GENMASK(2, 0))
 #define SOF_RT5682_SSP_CODEC_MASK			(GENMASK(2, 0))
 #define SOF_RT5682_MCLK_EN			BIT(3)
-#define SOF_RT5682_MCLK_24MHZ			BIT(4)
 #define SOF_SPEAKER_AMP_PRESENT		BIT(5)
 #define SOF_RT5682_SSP_AMP_SHIFT		6
 #define SOF_RT5682_SSP_AMP_MASK                 (GENMASK(8, 6))
@@ -119,7 +118,6 @@ static const struct dmi_system_id sof_rt5682_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "WhiskeyLake Client"),
 		},
 		.driver_data = (void *)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(1)),
 	},
 	{
@@ -133,7 +131,6 @@ static const struct dmi_system_id sof_rt5682_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Dooly"),
 		},
 		.driver_data = (void *)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(0) |
 					SOF_SPEAKER_AMP_PRESENT |
 					SOF_RT1015_SPEAKER_AMP_PRESENT |
@@ -145,7 +142,6 @@ static const struct dmi_system_id sof_rt5682_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Hatch"),
 		},
 		.driver_data = (void *)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(0) |
 					SOF_SPEAKER_AMP_PRESENT |
 					SOF_RT5682_SSP_AMP(1)),
@@ -295,51 +291,60 @@ static int sof_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
 	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
 	struct snd_soc_jack *jack;
 	int extra_jack_data;
-	int ret;
+	int ret, mclk_freq;
 
-	/* need to enable ASRC function for 24MHz mclk rate */
-	if ((sof_rt5682_quirk & SOF_RT5682_MCLK_EN) &&
-	    (sof_rt5682_quirk & SOF_RT5682_MCLK_24MHZ)) {
-		if (sof_rt5682_quirk & SOF_RT5682S_HEADPHONE_CODEC_PRESENT)
-			rt5682s_sel_asrc_clk_src(component,
-						 RT5682S_DA_STEREO1_FILTER |
-						 RT5682S_AD_STEREO1_FILTER,
-						 RT5682S_CLK_SEL_I2S1_ASRC);
-		else if (sof_rt5682_quirk & SOF_RT5650_HEADPHONE_CODEC_PRESENT) {
-			rt5645_sel_asrc_clk_src(component,
-						RT5645_DA_STEREO_FILTER |
-						RT5645_AD_STEREO_FILTER,
-						RT5645_CLK_SEL_I2S1_ASRC);
-			rt5645_sel_asrc_clk_src(component,
-						RT5645_DA_MONO_L_FILTER |
-						RT5645_DA_MONO_R_FILTER,
-						RT5645_CLK_SEL_I2S2_ASRC);
-		} else
-			rt5682_sel_asrc_clk_src(component,
-						RT5682_DA_STEREO1_FILTER |
-						RT5682_AD_STEREO1_FILTER,
-						RT5682_CLK_SEL_I2S1_ASRC);
-	}
+	if (sof_rt5682_quirk & SOF_RT5682_MCLK_EN) {
+		mclk_freq = sof_dai_get_mclk(rtd);
+		if (mclk_freq <= 0) {
+			dev_err(rtd->dev, "invalid mclk freq %d\n", mclk_freq);
+			return -EINVAL;
+		}
 
-	if (sof_rt5682_quirk & SOF_RT5682_MCLK_BYTCHT_EN) {
-		/*
-		 * The firmware might enable the clock at
-		 * boot (this information may or may not
-		 * be reflected in the enable clock register).
-		 * To change the rate we must disable the clock
-		 * first to cover these cases. Due to common
-		 * clock framework restrictions that do not allow
-		 * to disable a clock that has not been enabled,
-		 * we need to enable the clock first.
-		 */
-		ret = clk_prepare_enable(ctx->mclk);
-		if (!ret)
-			clk_disable_unprepare(ctx->mclk);
+		/* need to enable ASRC function for 24MHz mclk rate */
+		if (mclk_freq == 24000000) {
+			dev_info(rtd->dev, "enable ASRC\n");
+
+			if (sof_rt5682_quirk & SOF_RT5682S_HEADPHONE_CODEC_PRESENT)
+				rt5682s_sel_asrc_clk_src(component,
+							 RT5682S_DA_STEREO1_FILTER |
+							 RT5682S_AD_STEREO1_FILTER,
+							 RT5682S_CLK_SEL_I2S1_ASRC);
+			else if (sof_rt5682_quirk & SOF_RT5650_HEADPHONE_CODEC_PRESENT) {
+				rt5645_sel_asrc_clk_src(component,
+							RT5645_DA_STEREO_FILTER |
+							RT5645_AD_STEREO_FILTER,
+							RT5645_CLK_SEL_I2S1_ASRC);
+				rt5645_sel_asrc_clk_src(component,
+							RT5645_DA_MONO_L_FILTER |
+							RT5645_DA_MONO_R_FILTER,
+							RT5645_CLK_SEL_I2S2_ASRC);
+			} else
+				rt5682_sel_asrc_clk_src(component,
+							RT5682_DA_STEREO1_FILTER |
+							RT5682_AD_STEREO1_FILTER,
+							RT5682_CLK_SEL_I2S1_ASRC);
+		}
 
-		ret = clk_set_rate(ctx->mclk, 19200000);
+		if (sof_rt5682_quirk & SOF_RT5682_MCLK_BYTCHT_EN) {
+			/*
+			 * The firmware might enable the clock at
+			 * boot (this information may or may not
+			 * be reflected in the enable clock register).
+			 * To change the rate we must disable the clock
+			 * first to cover these cases. Due to common
+			 * clock framework restrictions that do not allow
+			 * to disable a clock that has not been enabled,
+			 * we need to enable the clock first.
+			 */
+			ret = clk_prepare_enable(ctx->mclk);
+			if (!ret)
+				clk_disable_unprepare(ctx->mclk);
 
-		if (ret)
-			dev_err(rtd->dev, "unable to set MCLK rate\n");
+			ret = clk_set_rate(ctx->mclk, 19200000);
+
+			if (ret)
+				dev_err(rtd->dev, "unable to set MCLK rate\n");
+		}
 	}
 
 	/*
@@ -413,17 +418,9 @@ static int sof_rt5682_hw_params(struct snd_pcm_substream *substream,
 
 		/* get the tplg configured mclk. */
 		pll_in = sof_dai_get_mclk(rtd);
-
-		/* mclk from the quirk is the first choice */
-		if (sof_rt5682_quirk & SOF_RT5682_MCLK_24MHZ) {
-			if (pll_in != 24000000)
-				dev_warn(rtd->dev, "configure wrong mclk in tplg, please use 24MHz.\n");
-			pll_in = 24000000;
-		} else if (pll_in == 0) {
-			/* use default mclk if not specified correct in topology */
-			pll_in = 19200000;
-		} else if (pll_in < 0) {
-			return pll_in;
+		if (pll_in <= 0) {
+			dev_err(rtd->dev, "invalid mclk freq %d\n", pll_in);
+			return -EINVAL;
 		}
 	} else {
 		if (sof_rt5682_quirk & SOF_RT5682S_HEADPHONE_CODEC_PRESENT)
@@ -451,7 +448,12 @@ static int sof_rt5682_hw_params(struct snd_pcm_substream *substream,
 
 	/* when MCLK is 512FS, no need to set PLL configuration additionally. */
 	if (pll_in == pll_out)
-		clk_id = RT5682S_SCLK_S_MCLK;
+		if (sof_rt5682_quirk & SOF_RT5682S_HEADPHONE_CODEC_PRESENT)
+			clk_id = RT5682S_SCLK_S_MCLK;
+		else if (sof_rt5682_quirk & SOF_RT5650_HEADPHONE_CODEC_PRESENT)
+			clk_id = RT5645_SCLK_S_MCLK;
+		else
+			clk_id = RT5682_SCLK_S_MCLK;
 	else {
 		/* Configure pll for codec */
 		ret = snd_soc_dai_set_pll(codec_dai, pll_id, pll_source, pll_in,
@@ -1071,7 +1073,6 @@ static const struct platform_device_id board_ids[] = {
 	{
 		.name = "cml_rt1015_rt5682",
 		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(0) |
 					SOF_SPEAKER_AMP_PRESENT |
 					SOF_RT1015_SPEAKER_AMP_PRESENT |
@@ -1080,7 +1081,6 @@ static const struct platform_device_id board_ids[] = {
 	{
 		.name = "jsl_rt5682_rt1015",
 		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(0) |
 					SOF_SPEAKER_AMP_PRESENT |
 					SOF_RT1015_SPEAKER_AMP_PRESENT |
@@ -1089,7 +1089,6 @@ static const struct platform_device_id board_ids[] = {
 	{
 		.name = "jsl_rt5682_mx98360",
 		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(0) |
 					SOF_SPEAKER_AMP_PRESENT |
 					SOF_MAX98360A_SPEAKER_AMP_PRESENT |
@@ -1098,7 +1097,6 @@ static const struct platform_device_id board_ids[] = {
 	{
 		.name = "jsl_rt5682_rt1015p",
 		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(0) |
 					SOF_SPEAKER_AMP_PRESENT |
 					SOF_RT1015P_SPEAKER_AMP_PRESENT |
@@ -1107,7 +1105,6 @@ static const struct platform_device_id board_ids[] = {
 	{
 		.name = "jsl_rt5682",
 		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(0)),
 	},
 	{
@@ -1271,7 +1268,6 @@ static const struct platform_device_id board_ids[] = {
 	{
 		.name = "jsl_rt5650",
 		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
-					SOF_RT5682_MCLK_24MHZ |
 					SOF_RT5682_SSP_CODEC(0) |
 					SOF_SPEAKER_AMP_PRESENT |
 					SOF_RT5682_SSP_AMP(1)),