Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 224 deletions

diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
deleted file mode 100644
index 29bf917242fe..000000000000
--- a/sound/soc/samsung/smartq_wm8987.c
+++ /dev/null
@@ -1,224 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
-//
-// Based on smdk6410_wm8987.c
-//     Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
-//     Graeme Gregory - graeme.gregory@wolfsonmicro.com
-
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-
-#include <sound/soc.h>
-#include <sound/jack.h>
-
-#include "i2s.h"
-#include "../codecs/wm8750.h"
-
-/*
- * WM8987 is register compatible with WM8750, so using that as base driver.
- */
-
-static struct snd_soc_card snd_soc_smartq;
-
-static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
-	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
-	unsigned int clk = 0;
-	int ret;
-
-	switch (params_rate(params)) {
-	case 8000:
-	case 16000:
-	case 32000:
-	case 48000:
-	case 96000:
-		clk = 12288000;
-		break;
-	case 11025:
-	case 22050:
-	case 44100:
-	case 88200:
-		clk = 11289600;
-		break;
-	}
-
-	/* Use PCLK for I2S signal generation */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
-					0, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* Gate the RCLK output on PAD */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
-					0, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
-				     SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-/*
- * SmartQ WM8987 HiFi DAI operations.
- */
-static const struct snd_soc_ops smartq_hifi_ops = {
-	.hw_params = smartq_hifi_hw_params,
-};
-
-static struct snd_soc_jack smartq_jack;
-
-static struct snd_soc_jack_pin smartq_jack_pins[] = {
-	/* Disable speaker when headphone is plugged in */
-	{
-		.pin	= "Internal Speaker",
-		.mask	= SND_JACK_HEADPHONE,
-	},
-};
-
-static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
-	{
-		.gpio		= -1,
-		.name		= "headphone detect",
-		.report		= SND_JACK_HEADPHONE,
-		.debounce_time	= 200,
-	},
-};
-
-static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
-	SOC_DAPM_PIN_SWITCH("Internal Speaker"),
-	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
-	SOC_DAPM_PIN_SWITCH("Internal Mic"),
-};
-
-static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
-				struct snd_kcontrol *k,
-				int event)
-{
-	struct gpio_desc *gpio = snd_soc_card_get_drvdata(&snd_soc_smartq);
-
-	gpiod_set_value(gpio, SND_SOC_DAPM_EVENT_OFF(event));
-
-	return 0;
-}
-
-static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
-	SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
-	SND_SOC_DAPM_HP("Headphone Jack", NULL),
-	SND_SOC_DAPM_MIC("Internal Mic", NULL),
-};
-
-static const struct snd_soc_dapm_route audio_map[] = {
-	{"Headphone Jack", NULL, "LOUT2"},
-	{"Headphone Jack", NULL, "ROUT2"},
-
-	{"Internal Speaker", NULL, "LOUT2"},
-	{"Internal Speaker", NULL, "ROUT2"},
-
-	{"Mic Bias", NULL, "Internal Mic"},
-	{"LINPUT2", NULL, "Mic Bias"},
-};
-
-static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
-	int err = 0;
-
-	/* set endpoints to not connected */
-	snd_soc_dapm_nc_pin(dapm, "LINPUT1");
-	snd_soc_dapm_nc_pin(dapm, "RINPUT1");
-	snd_soc_dapm_nc_pin(dapm, "OUT3");
-	snd_soc_dapm_nc_pin(dapm, "ROUT1");
-
-	/* Headphone jack detection */
-	err = snd_soc_card_jack_new_pins(rtd->card, "Headphone Jack",
-					 SND_JACK_HEADPHONE, &smartq_jack,
-					 smartq_jack_pins,
-					 ARRAY_SIZE(smartq_jack_pins));
-	if (err)
-		return err;
-
-	err = snd_soc_jack_add_gpios(&smartq_jack,
-				     ARRAY_SIZE(smartq_jack_gpios),
-				     smartq_jack_gpios);
-
-	return err;
-}
-
-SND_SOC_DAILINK_DEFS(wm8987,
-	DAILINK_COMP_ARRAY(COMP_CPU("samsung-i2s.0")),
-	DAILINK_COMP_ARRAY(COMP_CODEC("wm8750.0-0x1a", "wm8750-hifi")),
-	DAILINK_COMP_ARRAY(COMP_PLATFORM("samsung-i2s.0")));
-
-static struct snd_soc_dai_link smartq_dai[] = {
-	{
-		.name		= "wm8987",
-		.stream_name	= "SmartQ Hi-Fi",
-		.init		= smartq_wm8987_init,
-		.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBS_CFS,
-		.ops		= &smartq_hifi_ops,
-		SND_SOC_DAILINK_REG(wm8987),
-	},
-};
-
-static struct snd_soc_card snd_soc_smartq = {
-	.name = "SmartQ",
-	.owner = THIS_MODULE,
-	.dai_link = smartq_dai,
-	.num_links = ARRAY_SIZE(smartq_dai),
-
-	.dapm_widgets = wm8987_dapm_widgets,
-	.num_dapm_widgets = ARRAY_SIZE(wm8987_dapm_widgets),
-	.dapm_routes = audio_map,
-	.num_dapm_routes = ARRAY_SIZE(audio_map),
-	.controls = wm8987_smartq_controls,
-	.num_controls = ARRAY_SIZE(wm8987_smartq_controls),
-};
-
-static int smartq_probe(struct platform_device *pdev)
-{
-	struct gpio_desc *gpio;
-	int ret;
-
-	platform_set_drvdata(pdev, &snd_soc_smartq);
-
-	/* Initialise GPIOs used by amplifiers */
-	gpio = devm_gpiod_get(&pdev->dev, "amplifiers shutdown",
-			      GPIOD_OUT_HIGH);
-	if (IS_ERR(gpio)) {
-		dev_err(&pdev->dev, "Failed to register GPK12\n");
-		ret = PTR_ERR(gpio);
-		goto out;
-	}
-	snd_soc_card_set_drvdata(&snd_soc_smartq, gpio);
-
-	ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_smartq);
-	if (ret)
-		dev_err(&pdev->dev, "Failed to register card\n");
-
-out:
-	return ret;
-}
-
-static struct platform_driver smartq_driver = {
-	.driver = {
-		.name = "smartq-audio",
-	},
-	.probe = smartq_probe,
-};
-
-module_platform_driver(smartq_driver);
-
-/* Module information */
-MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
-MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
-MODULE_LICENSE("GPL");