Merge tag 'asoc-v5.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.7

This is a very big update for the core since Morimoto-san has been
rather busy continuing his refactorings to clean up a lot of the cruft
that we have accumilated over the years.  We've also gained several new
drivers, including initial (but still not complete) parts of the Intel
SoundWire support.

 - Lots of refactorings to modernize the code from Morimoto-san.
 - Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven.
 - Continued refactoring and fixing of the Intel support.
 - Soundwire and more advanced clocking support for Realtek RT5682.
 - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
   DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and
   TLV320ADCX140.

1 files changed, 40 insertions, 11 deletions

diff --git a/sound/soc/sof/intel/cnl.c b/sound/soc/sof/intel/cnl.c
index 9e2d8afe0535..e427d00eca71 100644
--- a/sound/soc/sof/intel/cnl.c
+++ b/sound/soc/sof/intel/cnl.c
@@ -65,11 +65,6 @@ static irqreturn_t cnl_ipc_irq_thread(int irq, void *context)
 		hda_dsp_ipc_get_reply(sdev);
 		snd_sof_ipc_reply(sdev, msg);
 
-		if (sdev->code_loading)	{
-			sdev->code_loading = 0;
-			wake_up(&sdev->waitq);
-		}
-
 		cnl_ipc_dsp_done(sdev);
 
 		spin_unlock_irq(&sdev->ipc_lock);
@@ -171,23 +166,48 @@ static bool cnl_compact_ipc_compress(struct snd_sof_ipc_msg *msg,
 static int cnl_ipc_send_msg(struct snd_sof_dev *sdev,
 			    struct snd_sof_ipc_msg *msg)
 {
+	struct sof_intel_hda_dev *hdev = sdev->pdata->hw_pdata;
+	struct sof_ipc_cmd_hdr *hdr;
 	u32 dr = 0;
 	u32 dd = 0;
 
+	/*
+	 * Currently the only compact IPC supported is the PM_GATE
+	 * IPC which is used for transitioning the DSP between the
+	 * D0I0 and D0I3 states. And these are sent only during the
+	 * set_power_state() op. Therefore, there will never be a case
+	 * that a compact IPC results in the DSP exiting D0I3 without
+	 * the host and FW being in sync.
+	 */
 	if (cnl_compact_ipc_compress(msg, &dr, &dd)) {
 		/* send the message via IPC registers */
 		snd_sof_dsp_write(sdev, HDA_DSP_BAR, CNL_DSP_REG_HIPCIDD,
 				  dd);
 		snd_sof_dsp_write(sdev, HDA_DSP_BAR, CNL_DSP_REG_HIPCIDR,
 				  CNL_DSP_REG_HIPCIDR_BUSY | dr);
-	} else {
-		/* send the message via mailbox */
-		sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
-				  msg->msg_size);
-		snd_sof_dsp_write(sdev, HDA_DSP_BAR, CNL_DSP_REG_HIPCIDR,
-				  CNL_DSP_REG_HIPCIDR_BUSY);
+		return 0;
 	}
 
+	/* send the message via mailbox */
+	sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
+			  msg->msg_size);
+	snd_sof_dsp_write(sdev, HDA_DSP_BAR, CNL_DSP_REG_HIPCIDR,
+			  CNL_DSP_REG_HIPCIDR_BUSY);
+
+	hdr = msg->msg_data;
+
+	/*
+	 * Use mod_delayed_work() to schedule the delayed work
+	 * to avoid scheduling multiple workqueue items when
+	 * IPCs are sent at a high-rate. mod_delayed_work()
+	 * modifies the timer if the work is pending.
+	 * Also, a new delayed work should not be queued after the
+	 * the CTX_SAVE IPC, which is sent before the DSP enters D3.
+	 */
+	if (hdr->cmd != (SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CTX_SAVE))
+		mod_delayed_work(system_wq, &hdev->d0i3_work,
+				 msecs_to_jiffies(SOF_HDA_D0I3_WORK_DELAY_MS));
+
 	return 0;
 }
 
@@ -259,6 +279,15 @@ const struct snd_sof_dsp_ops sof_cnl_ops = {
 	.pcm_trigger	= hda_dsp_pcm_trigger,
 	.pcm_pointer	= hda_dsp_pcm_pointer,
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_PROBES)
+	/* probe callbacks */
+	.probe_assign	= hda_probe_compr_assign,
+	.probe_free	= hda_probe_compr_free,
+	.probe_set_params	= hda_probe_compr_set_params,
+	.probe_trigger	= hda_probe_compr_trigger,
+	.probe_pointer	= hda_probe_compr_pointer,
+#endif
+
 	/* firmware loading */
 	.load_firmware = snd_sof_load_firmware_raw,