Merge tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Mostly many small changes spread as seen in diffstat in sound/*
  directory by this update.  A significant change in the subsystem level
  is the introduction of snd_soc_component, which will help more generic
  handling of SoC and off-SoC components.

  Also, snd_BUG_ON() macro is enabled unconditionally now due to its
  misuses, so people might hit kernel warnings (it's a good thing for
  us).

   - compress-offload: support for capture by Charles Keepax
   - HD-audio: codec delay support by Dylan Reid
   - HD-audio: improvements/fixes in generic parser: better headphone
     mic and headset mic support, jack_modes hint consolidation, proper
     beep attach/detachment, generalized power filter controls by David
     Henningsson, et al
   - HD-audio: Improved management of HDMI codec pins/converters
   - HD-audio: Better pin/DAC assignment for VIA codecs
   - HD-audio: Haswell HDMI workarounds
   - HD-audio: ALC268 codec support, a few new quirks for Chromebooks
   - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency
     fix by Clemens Ladisch
   - USB: support for DSD formats by Daniel Mack
   - USB: A few UAC2 device endian/cock fixes by Eldad Zack
   - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller,
     Yamaha THRxx devices
   - HDSPM: updates for TCO controls by Adrian Knoth
   - ASoC: Add a snd_soc_component object type for generic handling of
     SoC and off-SoC components by Kuninori Morimoto,
   - dmaengine: a large set of cleanups and conversions by Lars-Peter
     Clausen
   - ASoC DAPM: performance optimizations from Ryo Tsutsui
   - ASoC DAPM: support for mixer control sharing by Stephen Warren
   - ASoC: multiplatform ARM cleanups from Arnd Bergmann
   - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack"

* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits)
  ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch
  ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats
  ALSA: pcm_format_to_bits strong-typed conversion
  ALSA: compress: fix the states to check for allowing read
  ALSA: hda - Move Thinkpad X220 to use auto parser
  ALSA: USB: adjust for changed 3.8 USB API
  ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources
  sound: oss/dmabuf: use dma_map_single
  ALSA: ali5451: use mdelay instead of large udelay constants
  ALSA: hda - Add the support for ALC286 codec
  ALSA: usb-audio: USB quirk for Yamaha THR10C
  ALSA: usb-audio: USB quirk for Yamaha THR5A
  ALSA: usb-audio: USB quirk for Yamaha THR10
  ALSA: usb-audio: Fix autopm error during probing
  ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT
  ALSA: sound kconfig typo
  ALSA: emu10k1: Fix dock firmware loading
  ASoC: ux500: forward declare msp_i2s_platform_data
  ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes
  ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers
  ...

1 files changed, 135 insertions, 54 deletions

diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 9e2703a25156..3a2ce390e278 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -32,6 +32,7 @@
 #include "card.h"
 #include "helper.h"
 #include "clock.h"
+#include "quirks.h"
 
 static struct uac_clock_source_descriptor *
 	snd_usb_find_clock_source(struct usb_host_interface *ctrl_iface,
@@ -99,6 +100,41 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i
 	return buf;
 }
 
+static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_id,
+					unsigned char pin)
+{
+	int ret;
+
+	ret = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0),
+			      UAC2_CS_CUR,
+			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
+			      UAC2_CX_CLOCK_SELECTOR << 8,
+			      snd_usb_ctrl_intf(chip) | (selector_id << 8),
+			      &pin, sizeof(pin));
+	if (ret < 0)
+		return ret;
+
+	if (ret != sizeof(pin)) {
+		snd_printk(KERN_ERR
+			"usb-audio:%d: setting selector (id %d) unexpected length %d\n",
+			chip->dev->devnum, selector_id, ret);
+		return -EINVAL;
+	}
+
+	ret = uac_clock_selector_get_val(chip, selector_id);
+	if (ret < 0)
+		return ret;
+
+	if (ret != pin) {
+		snd_printk(KERN_ERR
+			"usb-audio:%d: setting selector (id %d) to %x failed (current: %d)\n",
+			chip->dev->devnum, selector_id, pin, ret);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
 static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
 {
 	int err;
@@ -131,7 +167,8 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
 }
 
 static int __uac_clock_find_source(struct snd_usb_audio *chip,
-				   int entity_id, unsigned long *visited)
+				   int entity_id, unsigned long *visited,
+				   bool validate)
 {
 	struct uac_clock_source_descriptor *source;
 	struct uac_clock_selector_descriptor *selector;
@@ -148,12 +185,19 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 
 	/* first, see if the ID we're looking for is a clock source already */
 	source = snd_usb_find_clock_source(chip->ctrl_intf, entity_id);
-	if (source)
-		return source->bClockID;
+	if (source) {
+		entity_id = source->bClockID;
+		if (validate && !uac_clock_source_is_valid(chip, entity_id)) {
+			snd_printk(KERN_ERR "usb-audio:%d: clock source %d is not valid, cannot use\n",
+				   chip->dev->devnum, entity_id);
+			return -ENXIO;
+		}
+		return entity_id;
+	}
 
 	selector = snd_usb_find_clock_selector(chip->ctrl_intf, entity_id);
 	if (selector) {
-		int ret;
+		int ret, i, cur;
 
 		/* the entity ID we are looking for is a selector.
 		 * find out what it currently selects */
@@ -164,22 +208,49 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 		/* Selector values are one-based */
 
 		if (ret > selector->bNrInPins || ret < 1) {
-			printk(KERN_ERR
+			snd_printk(KERN_ERR
 				"%s(): selector reported illegal value, id %d, ret %d\n",
 				__func__, selector->bClockID, ret);
 
 			return -EINVAL;
 		}
 
-		return __uac_clock_find_source(chip, selector->baCSourceID[ret-1],
-					       visited);
+		cur = ret;
+		ret = __uac_clock_find_source(chip, selector->baCSourceID[ret - 1],
+					       visited, validate);
+		if (!validate || ret > 0 || !chip->autoclock)
+			return ret;
+
+		/* The current clock source is invalid, try others. */
+		for (i = 1; i <= selector->bNrInPins; i++) {
+			int err;
+
+			if (i == cur)
+				continue;
+
+			ret = __uac_clock_find_source(chip, selector->baCSourceID[i - 1],
+				visited, true);
+			if (ret < 0)
+				continue;
+
+			err = uac_clock_selector_set_val(chip, entity_id, i);
+			if (err < 0)
+				continue;
+
+			snd_printk(KERN_INFO
+				"usb-audio:%d: found and selected valid clock source %d\n",
+				chip->dev->devnum, ret);
+			return ret;
+		}
+
+		return -ENXIO;
 	}
 
 	/* FIXME: multipliers only act as pass-thru element for now */
 	multiplier = snd_usb_find_clock_multiplier(chip->ctrl_intf, entity_id);
 	if (multiplier)
 		return __uac_clock_find_source(chip, multiplier->bCSourceID,
-						visited);
+						visited, validate);
 
 	return -EINVAL;
 }
@@ -195,11 +266,12 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
  *
  * Returns the clock source UnitID (>=0) on success, or an error.
  */
-int snd_usb_clock_find_source(struct snd_usb_audio *chip, int entity_id)
+int snd_usb_clock_find_source(struct snd_usb_audio *chip, int entity_id,
+			      bool validate)
 {
 	DECLARE_BITMAP(visited, 256);
 	memset(visited, 0, sizeof(visited));
-	return __uac_clock_find_source(chip, entity_id, visited);
+	return __uac_clock_find_source(chip, entity_id, visited, validate);
 }
 
 static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
@@ -247,66 +319,73 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
 	return 0;
 }
 
+static int get_sample_rate_v2(struct snd_usb_audio *chip, int iface,
+			      int altsetting, int clock)
+{
+	struct usb_device *dev = chip->dev;
+	__le32 data;
+	int err;
+
+	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+			      UAC2_CS_CONTROL_SAM_FREQ << 8,
+			      snd_usb_ctrl_intf(chip) | (clock << 8),
+			      &data, sizeof(data));
+	if (err < 0) {
+		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2): err %d\n",
+			   dev->devnum, iface, altsetting, err);
+		return 0;
+	}
+
+	return le32_to_cpu(data);
+}
+
 static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
 			      struct usb_host_interface *alts,
 			      struct audioformat *fmt, int rate)
 {
 	struct usb_device *dev = chip->dev;
-	unsigned char data[4];
+	__le32 data;
 	int err, cur_rate, prev_rate;
-	int clock = snd_usb_clock_find_source(chip, fmt->clock);
+	int clock;
+	bool writeable;
+	struct uac_clock_source_descriptor *cs_desc;
 
+	clock = snd_usb_clock_find_source(chip, fmt->clock, true);
 	if (clock < 0)
 		return clock;
 
-	if (!uac_clock_source_is_valid(chip, clock)) {
-		/* TODO: should we try to find valid clock setups by ourself? */
-		snd_printk(KERN_ERR "%d:%d:%d: clock source %d is not valid, cannot use\n",
-			   dev->devnum, iface, fmt->altsetting, clock);
-		return -ENXIO;
-	}
-
-	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
-			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			      UAC2_CS_CONTROL_SAM_FREQ << 8,
-			      snd_usb_ctrl_intf(chip) | (clock << 8),
-			      data, sizeof(data));
-	if (err < 0) {
-		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
-			   dev->devnum, iface, fmt->altsetting);
-		prev_rate = 0;
-	} else {
-		prev_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
-	}
+	prev_rate = get_sample_rate_v2(chip, iface, fmt->altsetting, clock);
+	if (prev_rate == rate)
+		return 0;
 
-	data[0] = rate;
-	data[1] = rate >> 8;
-	data[2] = rate >> 16;
-	data[3] = rate >> 24;
-	if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
-				   USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
-				   UAC2_CS_CONTROL_SAM_FREQ << 8,
-				   snd_usb_ctrl_intf(chip) | (clock << 8),
-				   data, sizeof(data))) < 0) {
-		snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
-			   dev->devnum, iface, fmt->altsetting, rate);
-		return err;
-	}
+	cs_desc = snd_usb_find_clock_source(chip->ctrl_intf, clock);
+	writeable = uac2_control_is_writeable(cs_desc->bmControls, UAC2_CS_CONTROL_SAM_FREQ - 1);
+	if (writeable) {
+		data = cpu_to_le32(rate);
+		err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
+				      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				      UAC2_CS_CONTROL_SAM_FREQ << 8,
+				      snd_usb_ctrl_intf(chip) | (clock << 8),
+				      &data, sizeof(data));
+		if (err < 0) {
+			snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2): err %d\n",
+				   dev->devnum, iface, fmt->altsetting, rate, err);
+			return err;
+		}
 
-	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
-			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
-			      UAC2_CS_CONTROL_SAM_FREQ << 8,
-			      snd_usb_ctrl_intf(chip) | (clock << 8),
-			      data, sizeof(data));
-	if (err < 0) {
-		snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
-			   dev->devnum, iface, fmt->altsetting);
-		cur_rate = 0;
+		cur_rate = get_sample_rate_v2(chip, iface, fmt->altsetting, clock);
 	} else {
-		cur_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+		cur_rate = prev_rate;
 	}
 
 	if (cur_rate != rate) {
+		if (!writeable) {
+			snd_printk(KERN_WARNING
+				   "%d:%d:%d: freq mismatch (RO clock): req %d, clock runs @%d\n",
+				   dev->devnum, iface, fmt->altsetting, rate, cur_rate);
+			return -ENXIO;
+		}
 		snd_printd(KERN_WARNING
 			   "current rate %d is different from the runtime rate %d\n",
 			   cur_rate, rate);
@@ -316,7 +395,9 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
 	 * interface is active. */
 	if (rate != prev_rate) {
 		usb_set_interface(dev, iface, 0);
+		snd_usb_set_interface_quirk(dev);
 		usb_set_interface(dev, iface, fmt->altsetting);
+		snd_usb_set_interface_quirk(dev);
 	}
 
 	return 0;