summaryrefslogtreecommitdiff
path: root/sound
diff options
context:
space:
mode:
authorBrian Austin <brian.austin@cirrus.com>2010-09-07 23:36:22 +0400
committerTakashi Iwai <tiwai@suse.de>2010-09-08 10:35:56 +0400
commita769cbcf60cee51f4431c0938acd39e7e5b76b8d (patch)
tree289ee7ac5717710a991cf4967958564ba5e0379b /sound
parent4d155641c81203440da64c4633b4efaab75f63b3 (diff)
downloadlinux-a769cbcf60cee51f4431c0938acd39e7e5b76b8d.tar.xz
ALSA: hda - Add errata initverb sequence for CS42xx codecs
Add init verb sequence for errata ER880C3 http://www.cirrus.com/en/pubs/errata/ER880C3.pdf Signed-off-by: Brian Austin <brian.austin@cirrus.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound')
-rw-r--r--sound/pci/hda/patch_cirrus.c50
1 files changed, 50 insertions, 0 deletions
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 4ef5efaaaef1..488fd9ade1ba 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -972,6 +972,53 @@ static struct hda_verb cs_coef_init_verbs[] = {
{} /* terminator */
};
+/* Errata: CS4207 rev C0/C1/C2 Silicon
+ *
+ * http://www.cirrus.com/en/pubs/errata/ER880C3.pdf
+ *
+ * 6. At high temperature (TA > +85°C), the digital supply current (IVD)
+ * may be excessive (up to an additional 200 μA), which is most easily
+ * observed while the part is being held in reset (RESET# active low).
+ *
+ * Root Cause: At initial powerup of the device, the logic that drives
+ * the clock and write enable to the S/PDIF SRC RAMs is not properly
+ * initialized.
+ * Certain random patterns will cause a steady leakage current in those
+ * RAM cells. The issue will resolve once the SRCs are used (turned on).
+ *
+ * Workaround: The following verb sequence briefly turns on the S/PDIF SRC
+ * blocks, which will alleviate the issue.
+ */
+
+static struct hda_verb cs_errata_init_verbs[] = {
+ {0x01, AC_VERB_SET_POWER_STATE, 0x00}, /* AFG: D0 */
+ {0x11, AC_VERB_SET_PROC_STATE, 0x01}, /* VPW: processing on */
+
+ {0x11, AC_VERB_SET_COEF_INDEX, 0x0008},
+ {0x11, AC_VERB_SET_PROC_COEF, 0x9999},
+ {0x11, AC_VERB_SET_COEF_INDEX, 0x0017},
+ {0x11, AC_VERB_SET_PROC_COEF, 0xa412},
+ {0x11, AC_VERB_SET_COEF_INDEX, 0x0001},
+ {0x11, AC_VERB_SET_PROC_COEF, 0x0009},
+
+ {0x07, AC_VERB_SET_POWER_STATE, 0x00}, /* S/PDIF Rx: D0 */
+ {0x08, AC_VERB_SET_POWER_STATE, 0x00}, /* S/PDIF Tx: D0 */
+
+ {0x11, AC_VERB_SET_COEF_INDEX, 0x0017},
+ {0x11, AC_VERB_SET_PROC_COEF, 0x2412},
+ {0x11, AC_VERB_SET_COEF_INDEX, 0x0008},
+ {0x11, AC_VERB_SET_PROC_COEF, 0x0000},
+ {0x11, AC_VERB_SET_COEF_INDEX, 0x0001},
+ {0x11, AC_VERB_SET_PROC_COEF, 0x0008},
+ {0x11, AC_VERB_SET_PROC_STATE, 0x00},
+
+ {0x07, AC_VERB_SET_POWER_STATE, 0x03}, /* S/PDIF Rx: D3 */
+ {0x08, AC_VERB_SET_POWER_STATE, 0x03}, /* S/PDIF Tx: D3 */
+ /*{0x01, AC_VERB_SET_POWER_STATE, 0x03},*/ /* AFG: D3 This is already handled */
+
+ {} /* terminator */
+};
+
/* SPDIF setup */
static void init_digital(struct hda_codec *codec)
{
@@ -991,6 +1038,9 @@ static int cs_init(struct hda_codec *codec)
{
struct cs_spec *spec = codec->spec;
+ /* init_verb sequence for C0/C1/C2 errata*/
+ snd_hda_sequence_write(codec, cs_errata_init_verbs);
+
snd_hda_sequence_write(codec, cs_coef_init_verbs);
if (spec->gpio_mask) {