summaryrefslogtreecommitdiff
path: root/sound
diff options
context:
space:
mode:
authorPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>2017-06-23 20:21:00 +0300
committerMark Brown <broonie@kernel.org>2017-06-28 20:47:05 +0300
commitc25695ae88ce2683029c6c242d610e3b0e809efc (patch)
tree080a10ade6f4a61b27d3646ebbbe8db5d991b868 /sound
parent98faf436ee05503e258ee934a9de8d8a3472b40f (diff)
downloadlinux-c25695ae88ce2683029c6c242d610e3b0e809efc.tar.xz
ASoC: Intel: cht_bsw_rt5672: 19.2MHz clock for Baytrail platforms
Lenovo platforms use RT5670 with Baytrail, add the required MCLK control and configuration to 19.2MHz Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'sound')
-rw-r--r--sound/soc/intel/boards/cht_bsw_rt5672.c89
1 files changed, 80 insertions, 9 deletions
diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c
index e4d46d4360d7..bc2a52de06a3 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5672.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5672.c
@@ -19,6 +19,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/clk.h>
+#include <asm/cpu_device_id.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -31,8 +33,11 @@
#define CHT_PLAT_CLK_3_HZ 19200000
#define CHT_CODEC_DAI "rt5670-aif1"
-static struct snd_soc_jack cht_bsw_headset;
-static char cht_bsw_codec_name[16];
+struct cht_mc_private {
+ struct snd_soc_jack headset;
+ char codec_name[16];
+ struct clk *mclk;
+};
/* Headset jack detection DAPM pins */
static struct snd_soc_jack_pin cht_bsw_headset_pins[] = {
@@ -64,6 +69,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_soc_dapm_context *dapm = w->dapm;
struct snd_soc_card *card = dapm->card;
struct snd_soc_dai *codec_dai;
+ struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
int ret;
codec_dai = cht_get_codec_dai(card);
@@ -73,6 +79,15 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
}
if (SND_SOC_DAPM_EVENT_ON(event)) {
+ if (ctx->mclk) {
+ ret = clk_prepare_enable(ctx->mclk);
+ if (ret < 0) {
+ dev_err(card->dev,
+ "could not configure MCLK state");
+ return ret;
+ }
+ }
+
/* set codec PLL source to the 19.2MHz platform clock (MCLK) */
ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK,
CHT_PLAT_CLK_3_HZ, 48000 * 512);
@@ -96,6 +111,9 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
*/
snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_RCCLK,
48000 * 512, SND_SOC_CLOCK_IN);
+
+ if (ctx->mclk)
+ clk_disable_unprepare(ctx->mclk);
}
return 0;
}
@@ -171,6 +189,7 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
int ret;
struct snd_soc_dai *codec_dai = runtime->codec_dai;
struct snd_soc_codec *codec = codec_dai->codec;
+ struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
/* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24);
@@ -194,13 +213,37 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
RT5670_CLK_SEL_I2S1_ASRC);
ret = snd_soc_card_jack_new(runtime->card, "Headset",
- SND_JACK_HEADSET | SND_JACK_BTN_0 |
- SND_JACK_BTN_1 | SND_JACK_BTN_2, &cht_bsw_headset,
- cht_bsw_headset_pins, ARRAY_SIZE(cht_bsw_headset_pins));
+ SND_JACK_HEADSET | SND_JACK_BTN_0 |
+ SND_JACK_BTN_1 | SND_JACK_BTN_2,
+ &ctx->headset,
+ cht_bsw_headset_pins,
+ ARRAY_SIZE(cht_bsw_headset_pins));
if (ret)
return ret;
- rt5670_set_jack_detect(codec, &cht_bsw_headset);
+ rt5670_set_jack_detect(codec, &ctx->headset);
+ if (ctx->mclk) {
+ /*
+ * The firmware might enable the clock at
+ * boot (this information may or may not
+ * be reflected in the enable clock register).
+ * To change the rate we must disable the clock
+ * first to cover these cases. Due to common
+ * clock framework restrictions that do not allow
+ * to disable a clock that has not been enabled,
+ * we need to enable the clock first.
+ */
+ ret = clk_prepare_enable(ctx->mclk);
+ if (!ret)
+ clk_disable_unprepare(ctx->mclk);
+
+ ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+
+ if (ret) {
+ dev_err(runtime->dev, "unable to set MCLK rate\n");
+ return ret;
+ }
+ }
return 0;
}
@@ -341,34 +384,62 @@ static struct snd_soc_card snd_soc_card_cht = {
.resume_post = cht_resume_post,
};
+static bool is_valleyview(void)
+{
+ static const struct x86_cpu_id cpu_ids[] = {
+ { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
+ {}
+ };
+
+ if (!x86_match_cpu(cpu_ids))
+ return false;
+ return true;
+}
+
#define RT5672_I2C_DEFAULT "i2c-10EC5670:00"
static int snd_cht_mc_probe(struct platform_device *pdev)
{
int ret_val = 0;
+ struct cht_mc_private *drv;
struct sst_acpi_mach *mach = pdev->dev.platform_data;
const char *i2c_name;
int i;
- strcpy(cht_bsw_codec_name, RT5672_I2C_DEFAULT);
+ drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC);
+ if (!drv)
+ return -ENOMEM;
+
+ strcpy(drv->codec_name, RT5672_I2C_DEFAULT);
/* fixup codec name based on HID */
if (mach) {
i2c_name = sst_acpi_find_name_from_hid(mach->id);
if (i2c_name) {
- snprintf(cht_bsw_codec_name, sizeof(cht_bsw_codec_name),
+ snprintf(drv->codec_name, sizeof(drv->codec_name),
"i2c-%s", i2c_name);
for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) {
if (!strcmp(cht_dailink[i].codec_name,
RT5672_I2C_DEFAULT)) {
cht_dailink[i].codec_name =
- cht_bsw_codec_name;
+ drv->codec_name;
break;
}
}
}
}
+ if (is_valleyview()) {
+ drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ if (IS_ERR(drv->mclk)) {
+ dev_err(&pdev->dev,
+ "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+ PTR_ERR(drv->mclk));
+ return PTR_ERR(drv->mclk);
+ }
+ }
+ snd_soc_card_set_drvdata(&snd_soc_card_cht, drv);
+
/* register the soc card */
snd_soc_card_cht.dev = &pdev->dev;
ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht);