Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

1 files changed, 140 insertions, 0 deletions

diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.sh b/tools/testing/selftests/bpf/test_lwt_seg6local.sh
new file mode 100755
index 000000000000..1c77994b5e71
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_lwt_seg6local.sh
@@ -0,0 +1,140 @@
+#!/bin/bash
+# Connects 6 network namespaces through veths.
+# Each NS may have different IPv6 global scope addresses :
+#   NS1 ---- NS2 ---- NS3 ---- NS4 ---- NS5 ---- NS6
+# fb00::1           fd00::1  fd00::2  fd00::3  fb00::6
+#                   fc42::1           fd00::4
+#
+# All IPv6 packets going to fb00::/16 through NS2 will be encapsulated in a
+# IPv6 header with a Segment Routing Header, with segments :
+# 	fd00::1 -> fd00::2 -> fd00::3 -> fd00::4
+#
+# 3 fd00::/16 IPv6 addresses are binded to seg6local End.BPF actions :
+# - fd00::1 : add a TLV, change the flags and apply a End.X action to fc42::1
+# - fd00::2 : remove the TLV, change the flags, add a tag
+# - fd00::3 : apply an End.T action to fd00::4, through routing table 117
+#
+# fd00::4 is a simple Segment Routing node decapsulating the inner IPv6 packet.
+# Each End.BPF action will validate the operations applied on the SRH by the
+# previous BPF program in the chain, otherwise the packet is dropped.
+#
+# An UDP datagram is sent from fb00::1 to fb00::6. The test succeeds if this
+# datagram can be read on NS6 when binding to fb00::6.
+
+TMP_FILE="/tmp/selftest_lwt_seg6local.txt"
+
+cleanup()
+{
+	if [ "$?" = "0" ]; then
+		echo "selftests: test_lwt_seg6local [PASS]";
+	else
+		echo "selftests: test_lwt_seg6local [FAILED]";
+	fi
+
+	set +e
+	ip netns del ns1 2> /dev/null
+	ip netns del ns2 2> /dev/null
+	ip netns del ns3 2> /dev/null
+	ip netns del ns4 2> /dev/null
+	ip netns del ns5 2> /dev/null
+	ip netns del ns6 2> /dev/null
+	rm -f $TMP_FILE
+}
+
+set -e
+
+ip netns add ns1
+ip netns add ns2
+ip netns add ns3
+ip netns add ns4
+ip netns add ns5
+ip netns add ns6
+
+trap cleanup 0 2 3 6 9
+
+ip link add veth1 type veth peer name veth2
+ip link add veth3 type veth peer name veth4
+ip link add veth5 type veth peer name veth6
+ip link add veth7 type veth peer name veth8
+ip link add veth9 type veth peer name veth10
+
+ip link set veth1 netns ns1
+ip link set veth2 netns ns2
+ip link set veth3 netns ns2
+ip link set veth4 netns ns3
+ip link set veth5 netns ns3
+ip link set veth6 netns ns4
+ip link set veth7 netns ns4
+ip link set veth8 netns ns5
+ip link set veth9 netns ns5
+ip link set veth10 netns ns6
+
+ip netns exec ns1 ip link set dev veth1 up
+ip netns exec ns2 ip link set dev veth2 up
+ip netns exec ns2 ip link set dev veth3 up
+ip netns exec ns3 ip link set dev veth4 up
+ip netns exec ns3 ip link set dev veth5 up
+ip netns exec ns4 ip link set dev veth6 up
+ip netns exec ns4 ip link set dev veth7 up
+ip netns exec ns5 ip link set dev veth8 up
+ip netns exec ns5 ip link set dev veth9 up
+ip netns exec ns6 ip link set dev veth10 up
+ip netns exec ns6 ip link set dev lo up
+
+# All link scope addresses and routes required between veths
+ip netns exec ns1 ip -6 addr add fb00::12/16 dev veth1 scope link
+ip netns exec ns1 ip -6 route add fb00::21 dev veth1 scope link
+ip netns exec ns2 ip -6 addr add fb00::21/16 dev veth2 scope link
+ip netns exec ns2 ip -6 addr add fb00::34/16 dev veth3 scope link
+ip netns exec ns2 ip -6 route add fb00::43 dev veth3 scope link
+ip netns exec ns3 ip -6 route add fb00::65 dev veth5 scope link
+ip netns exec ns3 ip -6 addr add fb00::43/16 dev veth4 scope link
+ip netns exec ns3 ip -6 addr add fb00::56/16 dev veth5 scope link
+ip netns exec ns4 ip -6 addr add fb00::65/16 dev veth6 scope link
+ip netns exec ns4 ip -6 addr add fb00::78/16 dev veth7 scope link
+ip netns exec ns4 ip -6 route add fb00::87 dev veth7 scope link
+ip netns exec ns5 ip -6 addr add fb00::87/16 dev veth8 scope link
+ip netns exec ns5 ip -6 addr add fb00::910/16 dev veth9 scope link
+ip netns exec ns5 ip -6 route add fb00::109 dev veth9 scope link
+ip netns exec ns5 ip -6 route add fb00::109 table 117 dev veth9 scope link
+ip netns exec ns6 ip -6 addr add fb00::109/16 dev veth10 scope link
+
+ip netns exec ns1 ip -6 addr add fb00::1/16 dev lo
+ip netns exec ns1 ip -6 route add fb00::6 dev veth1 via fb00::21
+
+ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
+ip netns exec ns2 ip -6 route add fd00::1 dev veth3 via fb00::43 scope link
+
+ip netns exec ns3 ip -6 route add fc42::1 dev veth5 via fb00::65
+ip netns exec ns3 ip -6 route add fd00::1 encap seg6local action End.BPF obj test_lwt_seg6local.o sec add_egr_x dev veth4
+
+ip netns exec ns4 ip -6 route add fd00::2 encap seg6local action End.BPF obj test_lwt_seg6local.o sec pop_egr dev veth6
+ip netns exec ns4 ip -6 addr add fc42::1 dev lo
+ip netns exec ns4 ip -6 route add fd00::3 dev veth7 via fb00::87
+
+ip netns exec ns5 ip -6 route add fd00::4 table 117 dev veth9 via fb00::109
+ip netns exec ns5 ip -6 route add fd00::3 encap seg6local action End.BPF obj test_lwt_seg6local.o sec inspect_t dev veth8
+
+ip netns exec ns6 ip -6 addr add fb00::6/16 dev lo
+ip netns exec ns6 ip -6 addr add fd00::4/16 dev lo
+
+ip netns exec ns1 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ns2 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ns3 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ns4 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ns5 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+ip netns exec ns6 sysctl net.ipv6.conf.all.seg6_enabled=1 > /dev/null
+ip netns exec ns6 sysctl net.ipv6.conf.lo.seg6_enabled=1 > /dev/null
+ip netns exec ns6 sysctl net.ipv6.conf.veth10.seg6_enabled=1 > /dev/null
+
+ip netns exec ns6 nc -l -6 -u -d 7330 > $TMP_FILE &
+ip netns exec ns1 bash -c "echo 'foobar' | nc -w0 -6 -u -p 2121 -s fb00::1 fb00::6 7330"
+sleep 5 # wait enough time to ensure the UDP datagram arrived to the last segment
+kill -INT $!
+
+if [[ $(< $TMP_FILE) != "foobar" ]]; then
+	exit 1
+fi
+
+exit 0