Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

1 files changed, 729 insertions, 0 deletions

diff --git a/tools/testing/selftests/bpf/test_tunnel.sh b/tools/testing/selftests/bpf/test_tunnel.sh
new file mode 100755
index 000000000000..aeb2901f21f4
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_tunnel.sh
@@ -0,0 +1,729 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# End-to-end eBPF tunnel test suite
+#   The script tests BPF network tunnel implementation.
+#
+# Topology:
+# ---------
+#     root namespace   |     at_ns0 namespace
+#                      |
+#      -----------     |     -----------
+#      | tnl dev |     |     | tnl dev |  (overlay network)
+#      -----------     |     -----------
+#      metadata-mode   |     native-mode
+#       with bpf       |
+#                      |
+#      ----------      |     ----------
+#      |  veth1  | --------- |  veth0  |  (underlay network)
+#      ----------    peer    ----------
+#
+#
+# Device Configuration
+# --------------------
+# Root namespace with metadata-mode tunnel + BPF
+# Device names and addresses:
+# 	veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay)
+# 	tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200 (overlay)
+#
+# Namespace at_ns0 with native tunnel
+# Device names and addresses:
+# 	veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay)
+# 	tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100 (overlay)
+#
+#
+# End-to-end ping packet flow
+# ---------------------------
+# Most of the tests start by namespace creation, device configuration,
+# then ping the underlay and overlay network.  When doing 'ping 10.1.1.100'
+# from root namespace, the following operations happen:
+# 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev.
+# 2) Tnl device's egress BPF program is triggered and set the tunnel metadata,
+#    with remote_ip=172.16.1.200 and others.
+# 3) Outer tunnel header is prepended and route the packet to veth1's egress
+# 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0
+# 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet
+# 6) Forward the packet to the overlay tnl dev
+
+PING_ARG="-c 3 -w 10 -q"
+ret=0
+GREEN='\033[0;92m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+
+config_device()
+{
+	ip netns add at_ns0
+	ip link add veth0 type veth peer name veth1
+	ip link set veth0 netns at_ns0
+	ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
+	ip netns exec at_ns0 ip link set dev veth0 up
+	ip link set dev veth1 up mtu 1500
+	ip addr add dev veth1 172.16.1.200/24
+}
+
+add_gre_tunnel()
+{
+	# at_ns0 namespace
+	ip netns exec at_ns0 \
+        ip link add dev $DEV_NS type $TYPE seq key 2 \
+		local 172.16.1.100 remote 172.16.1.200
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+	# root namespace
+	ip link add dev $DEV type $TYPE key 2 external
+	ip link set dev $DEV up
+	ip addr add dev $DEV 10.1.1.200/24
+}
+
+add_ip6gretap_tunnel()
+{
+
+	# assign ipv6 address
+	ip netns exec at_ns0 ip addr add ::11/96 dev veth0
+	ip netns exec at_ns0 ip link set dev veth0 up
+	ip addr add dev veth1 ::22/96
+	ip link set dev veth1 up
+
+	# at_ns0 namespace
+	ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \
+		local ::11 remote ::22
+
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+	ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+	# root namespace
+	ip link add dev $DEV type $TYPE external
+	ip addr add dev $DEV 10.1.1.200/24
+	ip addr add dev $DEV fc80::200/24
+	ip link set dev $DEV up
+}
+
+add_erspan_tunnel()
+{
+	# at_ns0 namespace
+	if [ "$1" == "v1" ]; then
+		ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE seq key 2 \
+		local 172.16.1.100 remote 172.16.1.200 \
+		erspan_ver 1 erspan 123
+	else
+		ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE seq key 2 \
+		local 172.16.1.100 remote 172.16.1.200 \
+		erspan_ver 2 erspan_dir egress erspan_hwid 3
+	fi
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+	# root namespace
+	ip link add dev $DEV type $TYPE external
+	ip link set dev $DEV up
+	ip addr add dev $DEV 10.1.1.200/24
+}
+
+add_ip6erspan_tunnel()
+{
+
+	# assign ipv6 address
+	ip netns exec at_ns0 ip addr add ::11/96 dev veth0
+	ip netns exec at_ns0 ip link set dev veth0 up
+	ip addr add dev veth1 ::22/96
+	ip link set dev veth1 up
+
+	# at_ns0 namespace
+	if [ "$1" == "v1" ]; then
+		ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE seq key 2 \
+		local ::11 remote ::22 \
+		erspan_ver 1 erspan 123
+	else
+		ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE seq key 2 \
+		local ::11 remote ::22 \
+		erspan_ver 2 erspan_dir egress erspan_hwid 7
+	fi
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+	# root namespace
+	ip link add dev $DEV type $TYPE external
+	ip addr add dev $DEV 10.1.1.200/24
+	ip link set dev $DEV up
+}
+
+add_vxlan_tunnel()
+{
+	# Set static ARP entry here because iptables set-mark works
+	# on L3 packet, as a result not applying to ARP packets,
+	# causing errors at get_tunnel_{key/opt}.
+
+	# at_ns0 namespace
+	ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE \
+		id 2 dstport 4789 gbp remote 172.16.1.200
+	ip netns exec at_ns0 \
+		ip link set dev $DEV_NS address 52:54:00:d9:01:00 up
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+	ip netns exec at_ns0 arp -s 10.1.1.200 52:54:00:d9:02:00
+	ip netns exec at_ns0 iptables -A OUTPUT -j MARK --set-mark 0x800FF
+
+	# root namespace
+	ip link add dev $DEV type $TYPE external gbp dstport 4789
+	ip link set dev $DEV address 52:54:00:d9:02:00 up
+	ip addr add dev $DEV 10.1.1.200/24
+	arp -s 10.1.1.100 52:54:00:d9:01:00
+}
+
+add_ip6vxlan_tunnel()
+{
+	#ip netns exec at_ns0 ip -4 addr del 172.16.1.100 dev veth0
+	ip netns exec at_ns0 ip -6 addr add ::11/96 dev veth0
+	ip netns exec at_ns0 ip link set dev veth0 up
+	#ip -4 addr del 172.16.1.200 dev veth1
+	ip -6 addr add dev veth1 ::22/96
+	ip link set dev veth1 up
+
+	# at_ns0 namespace
+	ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE id 22 dstport 4789 \
+		local ::11 remote ::22
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+	# root namespace
+	ip link add dev $DEV type $TYPE external dstport 4789
+	ip addr add dev $DEV 10.1.1.200/24
+	ip link set dev $DEV up
+}
+
+add_geneve_tunnel()
+{
+	# at_ns0 namespace
+	ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE \
+		id 2 dstport 6081 remote 172.16.1.200
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+	# root namespace
+	ip link add dev $DEV type $TYPE dstport 6081 external
+	ip link set dev $DEV up
+	ip addr add dev $DEV 10.1.1.200/24
+}
+
+add_ip6geneve_tunnel()
+{
+	ip netns exec at_ns0 ip addr add ::11/96 dev veth0
+	ip netns exec at_ns0 ip link set dev veth0 up
+	ip addr add dev veth1 ::22/96
+	ip link set dev veth1 up
+
+	# at_ns0 namespace
+	ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE id 22 \
+		remote ::22     # geneve has no local option
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+	# root namespace
+	ip link add dev $DEV type $TYPE external
+	ip addr add dev $DEV 10.1.1.200/24
+	ip link set dev $DEV up
+}
+
+add_ipip_tunnel()
+{
+	# at_ns0 namespace
+	ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE \
+		local 172.16.1.100 remote 172.16.1.200
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+
+	# root namespace
+	ip link add dev $DEV type $TYPE external
+	ip link set dev $DEV up
+	ip addr add dev $DEV 10.1.1.200/24
+}
+
+add_ipip6tnl_tunnel()
+{
+	ip netns exec at_ns0 ip addr add ::11/96 dev veth0
+	ip netns exec at_ns0 ip link set dev veth0 up
+	ip addr add dev veth1 ::22/96
+	ip link set dev veth1 up
+
+	# at_ns0 namespace
+	ip netns exec at_ns0 \
+		ip link add dev $DEV_NS type $TYPE \
+		local ::11 remote ::22
+	ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
+	ip netns exec at_ns0 ip link set dev $DEV_NS up
+
+	# root namespace
+	ip link add dev $DEV type $TYPE external
+	ip addr add dev $DEV 10.1.1.200/24
+	ip link set dev $DEV up
+}
+
+test_gre()
+{
+	TYPE=gretap
+	DEV_NS=gretap00
+	DEV=gretap11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_gre_tunnel
+	attach_bpf $DEV gre_set_tunnel gre_get_tunnel
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+        if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6gre()
+{
+	TYPE=ip6gre
+	DEV_NS=ip6gre00
+	DEV=ip6gre11
+	ret=0
+
+	check $TYPE
+	config_device
+	# reuse the ip6gretap function
+	add_ip6gretap_tunnel
+	attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
+	# underlay
+	ping6 $PING_ARG ::11
+	# overlay: ipv4 over ipv6
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	# overlay: ipv6 over ipv6
+	ip netns exec at_ns0 ping6 $PING_ARG fc80::200
+	check_err $?
+	cleanup
+
+        if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6gretap()
+{
+	TYPE=ip6gretap
+	DEV_NS=ip6gretap00
+	DEV=ip6gretap11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_ip6gretap_tunnel
+	attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
+	# underlay
+	ping6 $PING_ARG ::11
+	# overlay: ipv4 over ipv6
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	# overlay: ipv6 over ipv6
+	ip netns exec at_ns0 ping6 $PING_ARG fc80::200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_erspan()
+{
+	TYPE=erspan
+	DEV_NS=erspan00
+	DEV=erspan11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_erspan_tunnel $1
+	attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6erspan()
+{
+	TYPE=ip6erspan
+	DEV_NS=ip6erspan00
+	DEV=ip6erspan11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_ip6erspan_tunnel $1
+	attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel
+	ping6 $PING_ARG ::11
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_vxlan()
+{
+	TYPE=vxlan
+	DEV_NS=vxlan00
+	DEV=vxlan11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_vxlan_tunnel
+	attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6vxlan()
+{
+	TYPE=vxlan
+	DEV_NS=ip6vxlan00
+	DEV=ip6vxlan11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_ip6vxlan_tunnel
+	ip link set dev veth1 mtu 1500
+	attach_bpf $DEV ip6vxlan_set_tunnel ip6vxlan_get_tunnel
+	# underlay
+	ping6 $PING_ARG ::11
+	# ip4 over ip6
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: ip6$TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
+}
+
+test_geneve()
+{
+	TYPE=geneve
+	DEV_NS=geneve00
+	DEV=geneve11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_geneve_tunnel
+	attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ip6geneve()
+{
+	TYPE=geneve
+	DEV_NS=ip6geneve00
+	DEV=ip6geneve11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_ip6geneve_tunnel
+	attach_bpf $DEV ip6geneve_set_tunnel ip6geneve_get_tunnel
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: ip6$TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
+}
+
+test_ipip()
+{
+	TYPE=ipip
+	DEV_NS=ipip00
+	DEV=ipip11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_ipip_tunnel
+	ip link set dev veth1 mtu 1500
+	attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+test_ipip6()
+{
+	TYPE=ip6tnl
+	DEV_NS=ipip6tnl00
+	DEV=ipip6tnl11
+	ret=0
+
+	check $TYPE
+	config_device
+	add_ipip6tnl_tunnel
+	ip link set dev veth1 mtu 1500
+	attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel
+	# underlay
+	ping6 $PING_ARG ::11
+	# ip4 over ip6
+	ping $PING_ARG 10.1.1.100
+	check_err $?
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: $TYPE"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: $TYPE"${NC}
+}
+
+setup_xfrm_tunnel()
+{
+	auth=0x$(printf '1%.0s' {1..40})
+	enc=0x$(printf '2%.0s' {1..32})
+	spi_in_to_out=0x1
+	spi_out_to_in=0x2
+	# at_ns0 namespace
+	# at_ns0 -> root
+	ip netns exec at_ns0 \
+		ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
+			spi $spi_in_to_out reqid 1 mode tunnel \
+			auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
+	ip netns exec at_ns0 \
+		ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \
+		tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
+		mode tunnel
+	# root -> at_ns0
+	ip netns exec at_ns0 \
+		ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
+			spi $spi_out_to_in reqid 2 mode tunnel \
+			auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
+	ip netns exec at_ns0 \
+		ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \
+		tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
+		mode tunnel
+	# address & route
+	ip netns exec at_ns0 \
+		ip addr add dev veth0 10.1.1.100/32
+	ip netns exec at_ns0 \
+		ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \
+			src 10.1.1.100
+
+	# root namespace
+	# at_ns0 -> root
+	ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
+		spi $spi_in_to_out reqid 1 mode tunnel \
+		auth-trunc 'hmac(sha1)' $auth 96  enc 'cbc(aes)' $enc
+	ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \
+		tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
+		mode tunnel
+	# root -> at_ns0
+	ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
+		spi $spi_out_to_in reqid 2 mode tunnel \
+		auth-trunc 'hmac(sha1)' $auth 96  enc 'cbc(aes)' $enc
+	ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \
+		tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
+		mode tunnel
+	# address & route
+	ip addr add dev veth1 10.1.1.200/32
+	ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200
+}
+
+test_xfrm_tunnel()
+{
+	config_device
+        #tcpdump -nei veth1 ip &
+	output=$(mktemp)
+	cat /sys/kernel/debug/tracing/trace_pipe | tee $output &
+        setup_xfrm_tunnel
+	tc qdisc add dev veth1 clsact
+	tc filter add dev veth1 proto ip ingress bpf da obj test_tunnel_kern.o \
+		sec xfrm_get_state
+	ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
+	sleep 1
+	grep "reqid 1" $output
+	check_err $?
+	grep "spi 0x1" $output
+	check_err $?
+	grep "remote ip 0xac100164" $output
+	check_err $?
+	cleanup
+
+	if [ $ret -ne 0 ]; then
+                echo -e ${RED}"FAIL: xfrm tunnel"${NC}
+                return 1
+        fi
+        echo -e ${GREEN}"PASS: xfrm tunnel"${NC}
+}
+
+attach_bpf()
+{
+	DEV=$1
+	SET=$2
+	GET=$3
+	tc qdisc add dev $DEV clsact
+	tc filter add dev $DEV egress bpf da obj test_tunnel_kern.o sec $SET
+	tc filter add dev $DEV ingress bpf da obj test_tunnel_kern.o sec $GET
+}
+
+cleanup()
+{
+	ip netns delete at_ns0 2> /dev/null
+	ip link del veth1 2> /dev/null
+	ip link del ipip11 2> /dev/null
+	ip link del ipip6tnl11 2> /dev/null
+	ip link del gretap11 2> /dev/null
+	ip link del ip6gre11 2> /dev/null
+	ip link del ip6gretap11 2> /dev/null
+	ip link del vxlan11 2> /dev/null
+	ip link del ip6vxlan11 2> /dev/null
+	ip link del geneve11 2> /dev/null
+	ip link del ip6geneve11 2> /dev/null
+	ip link del erspan11 2> /dev/null
+	ip link del ip6erspan11 2> /dev/null
+}
+
+cleanup_exit()
+{
+	echo "CATCH SIGKILL or SIGINT, cleanup and exit"
+	cleanup
+	exit 0
+}
+
+check()
+{
+	ip link help $1 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP $1: iproute2 not support"
+	cleanup
+	return 1
+	fi
+}
+
+enable_debug()
+{
+	echo 'file ip_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
+	echo 'file ip6_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
+	echo 'file vxlan.c +p' > /sys/kernel/debug/dynamic_debug/control
+	echo 'file geneve.c +p' > /sys/kernel/debug/dynamic_debug/control
+	echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control
+}
+
+check_err()
+{
+	if [ $ret -eq 0 ]; then
+		ret=$1
+	fi
+}
+
+bpf_tunnel_test()
+{
+	echo "Testing GRE tunnel..."
+	test_gre
+	echo "Testing IP6GRE tunnel..."
+	test_ip6gre
+	echo "Testing IP6GRETAP tunnel..."
+	test_ip6gretap
+	echo "Testing ERSPAN tunnel..."
+	test_erspan v2
+	echo "Testing IP6ERSPAN tunnel..."
+	test_ip6erspan v2
+	echo "Testing VXLAN tunnel..."
+	test_vxlan
+	echo "Testing IP6VXLAN tunnel..."
+	test_ip6vxlan
+	echo "Testing GENEVE tunnel..."
+	test_geneve
+	echo "Testing IP6GENEVE tunnel..."
+	test_ip6geneve
+	echo "Testing IPIP tunnel..."
+	test_ipip
+	echo "Testing IPIP6 tunnel..."
+	test_ipip6
+	echo "Testing IPSec tunnel..."
+	test_xfrm_tunnel
+}
+
+trap cleanup 0 3 6
+trap cleanup_exit 2 9
+
+cleanup
+bpf_tunnel_test
+
+exit 0