Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

6 files changed, 2010 insertions, 36 deletions

diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json b/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
index 93cf8fea8ae7..3a2f51fc7fd4 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
@@ -398,13 +398,83 @@
                 255
             ]
         ],
-        "cmdUnderTest": "for i in `seq 1 32`; do cmd=\"action csum tcp continue index $i \"; args=\"$args$cmd\"; done && $TC actions add $args",
-        "expExitCode": "255",
+        "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum tcp continue index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"",
+        "expExitCode": "0",
         "verifyCmd": "$TC actions ls action csum",
         "matchPattern": "^[ \t]+index [0-9]* ref",
         "matchCount": "32",
         "teardown": [
             "$TC actions flush action csum"
         ]
+    },
+    {
+        "id": "b4e9",
+        "name": "Delete batch of 32 csum actions",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ],
+            "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum tcp continue index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\""
+        ],
+        "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action csum",
+        "matchPattern": "^[ \t]+index [0-9]+ ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "0015",
+        "name": "Add batch of 32 csum tcp actions with large cookies",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum tcp continue index \\$i cookie aaabbbcccdddeee \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action csum",
+        "matchPattern": "^[ \t]+index [0-9]* ref",
+        "matchCount": "32",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "989e",
+        "name": "Delete batch of 32 csum actions with large cookies",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ],
+            "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum tcp continue index \\$i cookie aaabbbcccdddeee \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\""
+        ],
+        "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action csum index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action csum",
+        "matchPattern": "^[ \t]+index [0-9]+ ref",
+        "matchCount": "0",
+        "teardown": []
     }
 ]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json b/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
index 9f34f0753969..de97e4ff705c 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
@@ -1,7 +1,7 @@
 [
     {
-        "id": "a568",
-        "name": "Add action with ife type",
+        "id": "7682",
+        "name": "Create valid ife encode action with mark and pass control",
         "category": [
             "actions",
             "ife"
@@ -12,21 +12,782 @@
                 0,
                 1,
                 255
-            ],
-            "$TC actions add action ife encode type 0xDEAD index 1"
+            ]
         ],
-        "cmdUnderTest": "$TC actions get action ife index 1",
+        "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 2",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "ef47",
+        "name": "Create valid ife encode action with mark and pipe control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use mark 10 pipe index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 2",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark.*index 2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "df43",
+        "name": "Create valid ife encode action with mark and continue control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow mark continue index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 2",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*allow mark.*index 2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "e4cf",
+        "name": "Create valid ife encode action with mark and drop control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use mark 789 drop index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 2",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*use mark 789.*index 2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "ccba",
+        "name": "Create valid ife encode action with mark and reclassify control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use mark 656768 reclassify index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 2",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 656768.*index 2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "a1cf",
+        "name": "Create valid ife encode action with mark and jump control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use mark 65 jump 1 index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 2",
+        "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0xED3E.*use mark 65.*index 2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "cb3d",
+        "name": "Create valid ife encode action with mark value at 32-bit maximum",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295 reclassify index 90",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 90",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 4294967295.*index 90",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "1efb",
+        "name": "Create ife encode action with mark value exceeding 32-bit maximum",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295999 pipe index 90",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 90",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark 4294967295999.*index 90",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "95ed",
+        "name": "Create valid ife encode action with prio and pass control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow prio pass index 9",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 9",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow prio.*index 9",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "aa17",
+        "name": "Create valid ife encode action with prio and pipe control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use prio 7 pipe index 9",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 9",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 7.*index 9",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "74c7",
+        "name": "Create valid ife encode action with prio and continue control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use prio 3 continue index 9",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 9",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use prio 3.*index 9",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "7a97",
+        "name": "Create valid ife encode action with prio and drop control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow prio drop index 9",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 9",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow prio.*index 9",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "f66b",
+        "name": "Create valid ife encode action with prio and reclassify control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use prio 998877 reclassify index 9",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 9",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 998877.*index 9",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "3056",
+        "name": "Create valid ife encode action with prio and jump control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use prio 998877 jump 10 index 9",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 9",
+        "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0xED3E.*use prio 998877.*index 9",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "7dd3",
+        "name": "Create valid ife encode action with prio value at 32-bit maximum",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use prio 4294967295 reclassify index 99",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 99",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 4294967295.*index 99",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "2ca1",
+        "name": "Create ife encode action with prio value exceeding 32-bit maximum",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use prio 4294967298 pipe index 99",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 99",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 4294967298.*index 99",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "05bb",
+        "name": "Create valid ife encode action with tcindex and pass control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow tcindex pass index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "ce65",
+        "name": "Create valid ife encode action with tcindex and pipe control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use tcindex 111 pipe index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 111.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "09cd",
+        "name": "Create valid ife encode action with tcindex and continue control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "8eb5",
+        "name": "Create valid ife encode action with tcindex and continue control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "451a",
+        "name": "Create valid ife encode action with tcindex and drop control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow tcindex drop index 77",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 77",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow tcindex.*index 77",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "d76c",
+        "name": "Create valid ife encode action with tcindex and reclassify control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow tcindex reclassify index 77",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 77",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*allow tcindex.*index 77",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "e731",
+        "name": "Create valid ife encode action with tcindex and jump control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow tcindex jump 999 index 77",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 77",
+        "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0xED3E.*allow tcindex.*index 77",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "b7b8",
+        "name": "Create valid ife encode action with tcindex value at 16-bit maximum",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use tcindex 65535 pass index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*use tcindex 65535.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "d0d8",
+        "name": "Create ife encode action with tcindex value exceeding 16-bit maximum",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use tcindex 65539 pipe index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 65539.*index 1",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "2a9c",
+        "name": "Create valid ife encode action with mac src parameter",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow mark src 00:11:22:33:44:55 pipe index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow mark src 00:11:22:33:44:55.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "cf5c",
+        "name": "Create valid ife encode action with mac dst parameter",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use prio 9876 dst 00:11:22:33:44:55 reclassify index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "2353",
+        "name": "Create valid ife encode action with mac src and mac dst parameters",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow tcindex src 00:aa:bb:cc:dd:ee dst 00:11:22:33:44:55 pass index 11",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 11",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "552c",
+        "name": "Create valid ife encode action with mark and type parameters",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use mark 7 type 0xfefe pass index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xFEFE.*use mark 7.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "0421",
+        "name": "Create valid ife encode action with prio and type parameters",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use prio 444 type 0xabba pipe index 21",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 21",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xABBA.*use prio 444.*index 21",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "4017",
+        "name": "Create valid ife encode action with tcindex and type parameters",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode use tcindex 5000 type 0xabcd reclassify index 21",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 21",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xABCD.*use tcindex 5000.*index 21",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "fac3",
+        "name": "Create valid ife encode action with index at 32-bit maximnum",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 4294967295",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "7c25",
+        "name": "Create valid ife decode action with pass control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife decode pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "type 0xDEAD",
+        "matchPattern": "action order [0-9]*: ife decode action pass.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
         ]
     },
     {
-        "id": "b983",
-        "name": "Add action without ife type",
+        "id": "dccb",
+        "name": "Create valid ife decode action with pipe control",
         "category": [
             "actions",
             "ife"
@@ -37,16 +798,267 @@
                 0,
                 1,
                 255
-            ],
-            "$TC actions add action ife encode index 1"
+            ]
         ],
-        "cmdUnderTest": "$TC actions get action ife index 1",
+        "cmdUnderTest": "$TC actions add action ife decode pipe index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "type 0xED3E",
+        "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
         ]
+    },
+    {
+        "id": "7bb9",
+        "name": "Create valid ife decode action with continue control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife decode continue index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife decode action continue.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "d9ad",
+        "name": "Create valid ife decode action with drop control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife decode drop index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife decode action drop.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "219f",
+        "name": "Create valid ife decode action with reclassify control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife decode reclassify index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "8f44",
+        "name": "Create valid ife decode action with jump control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife decode jump 10 index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 1",
+        "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "56cf",
+        "name": "Create ife encode action with index exceeding 32-bit maximum",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295999",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 4294967295999",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295999",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "ee94",
+        "name": "Create ife encode action with invalid control",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow mark kuka index 4",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 4",
+        "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0xED3E.*allow mark.*index 4",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "b330",
+        "name": "Create ife encode action with cookie",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow prio pipe index 4 cookie aabbccddeeff112233445566778800a1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action ife index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1",
+        "matchCount": "1",
+        "teardown": [
+           "$TC actions flush action ife"
+        ]
+    },
+    {
+        "id": "bbc0",
+        "name": "Create ife encode action with invalid argument",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow foo pipe index 4",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow foo.*index 4",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "d54a",
+        "name": "Create ife encode action with invalid type argument",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow prio type 70000 pipe index 4",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0x11170.*allow prio.*index 4",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "7ee0",
+        "name": "Create ife encode action with invalid mac src argument",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow prio src 00:11:22:33:44:pp pipe index 4",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*allow prio.*index 4",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "0a7d",
+        "name": "Create ife encode action with invalid mac dst argument",
+        "category": [
+            "actions",
+            "ife"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action ife",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action ife encode allow prio dst 00.111-22:33:44:aa pipe index 4",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action ife index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*allow prio.*index 4",
+        "matchCount": "0",
+        "teardown": []
     }
 ]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
index 443c9b3c8664..6e4edfae1799 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
@@ -340,7 +340,7 @@
     },
     {
         "id": "8b69",
-        "name": "Add mirred mirror action with maximum index",
+        "name": "Add mirred mirror action with index at 32-bit maximum",
         "category": [
             "actions",
             "mirred"
@@ -363,6 +363,28 @@
         ]
     },
     {
+        "id": "3f66",
+        "name": "Add mirred mirror action with index exceeding 32-bit maximum",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo pipe index 429496729555",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action mirred index 429496729555",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) pipe.*index 429496729555",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
         "id": "a70e",
         "name": "Delete mirred mirror action",
         "category": [
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/police.json b/tools/testing/selftests/tc-testing/tc-tests/actions/police.json
index 38d85a1d7492..f03763d81617 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/police.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/police.json
@@ -401,11 +401,11 @@
         ],
         "cmdUnderTest": "$TC actions add action police rate 10mbit burst 10k index 4294967295",
         "expExitCode": "0",
-        "verifyCmd": "$TC actions get action mirred index 4294967295",
+        "verifyCmd": "$TC actions get action police index 4294967295",
         "matchPattern": "action order [0-9]*:  police 0xffffffff rate 10Mbit burst 10Kb mtu 2Kb",
         "matchCount": "1",
         "teardown": [
-            "$TC actions flush action mirred"
+            "$TC actions flush action police"
         ]
     },
     {
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json b/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json
new file mode 100644
index 000000000000..3aca33c00039
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/sample.json
@@ -0,0 +1,588 @@
+[
+    {
+        "id": "9784",
+        "name": "Add valid sample action with mandatory arguments",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 10 group 1 index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 2",
+        "matchPattern": "action order [0-9]+: sample rate 1/10 group 1.*index 2 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "5c91",
+        "name": "Add valid sample action with mandatory arguments and continue control action",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 700 group 2 continue index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 2",
+        "matchPattern": "action order [0-9]+: sample rate 1/700 group 2 continue.*index 2 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "334b",
+        "name": "Add valid sample action with mandatory arguments and drop control action",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 10000 group 11 drop index 22",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample rate 1/10000 group 11 drop.*index 22 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "da69",
+        "name": "Add valid sample action with mandatory arguments and reclassify control action",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 20000 group 72 reclassify index 100",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample rate 1/20000 group 72 reclassify.*index 100 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "13ce",
+        "name": "Add valid sample action with mandatory arguments and pipe control action",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 20 group 2 pipe index 100",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample rate 1/20 group 2 pipe.*index 100 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "1886",
+        "name": "Add valid sample action with mandatory arguments and jump control action",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 700 group 25 jump 4 index 200",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 200",
+        "matchPattern": "action order [0-9]+: sample rate 1/700 group 25 jump 4.*index 200 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "b6d4",
+        "name": "Add sample action with mandatory arguments and invalid control action",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 200000 group 52 foo index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample rate 1/200000 group 52 foo.*index 1 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "a874",
+        "name": "Add invalid sample action without mandatory arguments",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample.*index 1 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "ac01",
+        "name": "Add invalid sample action without mandatory argument rate",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample group 10 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample.*group 10.*index 1 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "4203",
+        "name": "Add invalid sample action without mandatory argument group",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 100 index 10",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action sample index 10",
+        "matchPattern": "action order [0-9]+: sample rate 1/100.*index 10 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "14a7",
+        "name": "Add invalid sample action without mandatory argument group",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 100 index 10",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action sample index 10",
+        "matchPattern": "action order [0-9]+: sample rate 1/100.*index 10 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "8f2e",
+        "name": "Add valid sample action with trunc argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 1024 group 4 trunc 1024 index 10",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 10",
+        "matchPattern": "action order [0-9]+: sample rate 1/1024 group 4 trunc_size 1024 pipe.*index 10 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "45f8",
+        "name": "Add sample action with maximum rate argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 4294967295 group 4 index 10",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 10",
+        "matchPattern": "action order [0-9]+: sample rate 1/4294967295 group 4 pipe.*index 10 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "ad0c",
+        "name": "Add sample action with maximum trunc argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 16000 group 4 trunc 4294967295 index 10",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 10",
+        "matchPattern": "action order [0-9]+: sample rate 1/16000 group 4 trunc_size 4294967295 pipe.*index 10 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "83a9",
+        "name": "Add sample action with maximum group argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 4294 group 4294967295 index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 1",
+        "matchPattern": "action order [0-9]+: sample rate 1/4294 group 4294967295 pipe.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "ed27",
+        "name": "Add sample action with invalid rate argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 4294967296 group 4 index 10",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action sample index 10",
+        "matchPattern": "action order [0-9]+: sample rate 1/4294967296 group 4 pipe.*index 10 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "2eae",
+        "name": "Add sample action with invalid group argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 4098 group 5294967299 continue index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action sample index 1",
+        "matchPattern": "action order [0-9]+: sample rate 1/4098 group 5294967299 continue.*index 1 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "6ff3",
+        "name": "Add sample action with invalid trunc size",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 1024 group 4 trunc 112233445566 index 11",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action sample index 11",
+        "matchPattern": "action order [0-9]+: sample rate 1/1024 group 4 trunc_size 112233445566.*index 11 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "2b2a",
+        "name": "Add sample action with invalid index",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 1024 group 4 index 5294967299",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action sample index 5294967299",
+        "matchPattern": "action order [0-9]+: sample rate 1/1024 group 4 pipe.*index 5294967299 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "dee2",
+        "name": "Add sample action with maximum allowed index",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 1024 group 4 index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 4294967295",
+        "matchPattern": "action order [0-9]+: sample rate 1/1024 group 4 pipe.*index 4294967295 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "560e",
+        "name": "Add sample action with cookie",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action sample rate 1024 group 4 index 45 cookie aabbccdd",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action sample index 45",
+        "matchPattern": "action order [0-9]+: sample rate 1/1024 group 4 pipe.*index 45.*cookie aabbccdd",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "704a",
+        "name": "Replace existing sample action with new rate argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action sample rate 1024 group 4 index 4"
+        ],
+        "cmdUnderTest": "$TC actions replace action sample rate 2048 group 4 index 4",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample rate 1/2048 group 4 pipe.*index 4",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "60eb",
+        "name": "Replace existing sample action with new group argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action sample rate 1024 group 4 index 4"
+        ],
+        "cmdUnderTest": "$TC actions replace action sample rate 1024 group 7 index 4",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample rate 1/1024 group 7 pipe.*index 4",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "2cce",
+        "name": "Replace existing sample action with new trunc argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action sample rate 1024 group 4 trunc 48 index 4"
+        ],
+        "cmdUnderTest": "$TC actions replace action sample rate 1024 group 7 trunc 64 index 4",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample rate 1/1024 group 7 trunc_size 64 pipe.*index 4",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    },
+    {
+        "id": "59d1",
+        "name": "Replace existing sample action with new control argument",
+        "category": [
+            "actions",
+            "sample"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action sample",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action sample rate 1024 group 4 reclassify index 4"
+        ],
+        "cmdUnderTest": "$TC actions replace action sample rate 1024 group 7 pipe index 4",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action sample",
+        "matchPattern": "action order [0-9]+: sample rate 1/1024 group 7 pipe.*index 4",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action sample"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json b/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json
index 4510ddfa6e54..69ea09eefffc 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json
@@ -1,7 +1,7 @@
 [
     {
         "id": "6f5a",
-        "name": "Add vlan pop action",
+        "name": "Add vlan pop action with pipe opcode",
         "category": [
             "actions",
             "vlan"
@@ -14,18 +14,18 @@
                 255
             ]
         ],
-        "cmdUnderTest": "$TC actions add action vlan pop index 8",
+        "cmdUnderTest": "$TC actions add action vlan pop pipe index 8",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action vlan",
-        "matchPattern": "action order [0-9]+: vlan.*pop.*index 8 ref",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*pipe.*index 8 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action vlan"
         ]
     },
     {
-        "id": "ee6f",
-        "name": "Add vlan pop action with large index",
+        "id": "df35",
+        "name": "Add vlan pop action with pass opcode",
         "category": [
             "actions",
             "vlan"
@@ -38,10 +38,82 @@
                 255
             ]
         ],
-        "cmdUnderTest": "$TC actions add action vlan pop index 4294967295",
+        "cmdUnderTest": "$TC actions add action vlan pop pass index 8",
         "expExitCode": "0",
-        "verifyCmd": "$TC actions list action vlan",
-        "matchPattern": "action order [0-9]+: vlan.*pop.*index 4294967295 ref",
+        "verifyCmd": "$TC actions get action vlan index 8",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*pass.*index 8 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "b0d4",
+        "name": "Add vlan pop action with drop opcode",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop drop index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 8",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*drop.*index 8 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "95ee",
+        "name": "Add vlan pop action with reclassify opcode",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop reclassify index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 8",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*reclassify.*index 8 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "0283",
+        "name": "Add vlan pop action with continue opcode",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop continue index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 8",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*continue.*index 8 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action vlan"
@@ -96,6 +168,74 @@
         ]
     },
     {
+        "id": "a178",
+        "name": "Add vlan pop action with invalid opcode",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop foo index 8",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*foo.*index 8 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "ee6f",
+        "name": "Add vlan pop action with index at 32-bit maximum",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*index 4294967295 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "0dfa",
+        "name": "Add vlan pop action with index exceeding 32-bit maximum",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop reclassify index 429496729599",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action vlan index 429496729599",
+        "matchPattern": "action order [0-9]+: vlan.*pop.reclassify.*index 429496729599",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
         "id": "2b91",
         "name": "Add vlan invalid action",
         "category": [
@@ -115,13 +255,11 @@
         "verifyCmd": "$TC actions list action vlan",
         "matchPattern": "action order [0-9]+: vlan.*bad_mode",
         "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action vlan"
-        ]
+        "teardown": []
     },
     {
         "id": "57fc",
-        "name": "Add vlan action with invalid protocol type",
+        "name": "Add vlan push action with invalid protocol type",
         "category": [
             "actions",
             "vlan"
@@ -139,9 +277,7 @@
         "verifyCmd": "$TC actions list action vlan",
         "matchPattern": "action order [0-9]+: vlan.*push",
         "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action vlan"
-        ]
+        "teardown": []
     },
     {
         "id": "3989",
@@ -216,6 +352,30 @@
         ]
     },
     {
+        "id": "1f4b",
+        "name": "Add vlan push action with maximum 12-bit vlan ID",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push id 4094 index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 1",
+        "matchPattern": "action order [0-9]+: vlan.*push id 4094.*protocol 802.1Q.*priority 0.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
         "id": "1f7b",
         "name": "Add vlan push action with invalid vlan ID",
         "category": [
@@ -240,6 +400,30 @@
         ]
     },
     {
+        "id": "fe40",
+        "name": "Add vlan push action with maximum 3-bit IEEE 802.1p priority",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push id 4 priority 7 reclassify index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 1",
+        "matchPattern": "action order [0-9]+: vlan.*push id 4.*protocol 802.1Q.*priority 7.*reclassify.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
         "id": "5d02",
         "name": "Add vlan push action with invalid IEEE 802.1p priority",
         "category": [
@@ -259,9 +443,7 @@
         "verifyCmd": "$TC actions list action vlan",
         "matchPattern": "action order [0-9]+: vlan.*push id 5.*index 1 ref",
         "matchCount": "0",
-        "teardown": [
-            "$TC actions flush action vlan"
-        ]
+        "teardown": []
     },
     {
         "id": "6812",
@@ -312,6 +494,106 @@
         ]
     },
     {
+        "id": "3deb",
+        "name": "Replace existing vlan push action with new ID",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action vlan push id 500 pipe index 12"
+        ],
+        "cmdUnderTest": "$TC actions replace action vlan push id 700 pipe index 12",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 12",
+        "matchPattern": "action order [0-9]+: vlan.*push id 700 protocol 802.1Q priority 0 pipe.*index 12 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "9e76",
+        "name": "Replace existing vlan push action with new protocol",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action vlan push id 1 protocol 802.1Q pipe index 1"
+        ],
+        "cmdUnderTest": "$TC actions replace action vlan push id 1 protocol 802.1ad pipe index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 1",
+        "matchPattern": "action order [0-9]+: vlan.*push id 1 protocol 802.1ad priority 0 pipe.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "ede4",
+        "name": "Replace existing vlan push action with new priority",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action vlan push id 1 protocol 802.1Q priority 3 reclassify index 1"
+        ],
+        "cmdUnderTest": "$TC actions replace action vlan push id 1 priority 4 reclassify index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 1",
+        "matchPattern": "action order [0-9]+: vlan.*push id 1 protocol 802.1Q priority 4 reclassify.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "d413",
+        "name": "Replace existing vlan pop action with new cookie",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action vlan pop continue index 1 cookie 22334455"
+        ],
+        "cmdUnderTest": "$TC actions replace action vlan pop continue index 1 cookie a1b1c2d1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 1",
+        "matchPattern": "action order [0-9]+: vlan.*pop continue.*index 1 ref.*cookie a1b1c2d1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
         "id": "83a4",
         "name": "Delete vlan pop action",
         "category": [
@@ -385,7 +667,7 @@
     },
     {
         "id": "1d78",
-        "name": "Add vlan action with cookie",
+        "name": "Add vlan push action with cookie",
         "category": [
             "actions",
             "vlan"