summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/Kconfig13
-rw-r--r--arch/powerpc/Kconfig.debug1
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn.dts12
-rw-r--r--arch/powerpc/configs/g5_defconfig1
-rw-r--r--arch/powerpc/kernel/Makefile1
-rw-r--r--arch/powerpc/kernel/asm-offsets.c1
-rw-r--r--arch/powerpc/kernel/entry_32.S5
-rw-r--r--arch/powerpc/kernel/head_64.S11
-rw-r--r--arch/powerpc/kernel/irq.c10
-rw-r--r--arch/powerpc/kernel/misc_32.S25
-rw-r--r--arch/powerpc/kernel/process.c2
-rw-r--r--arch/powerpc/kernel/rio.c52
-rw-r--r--arch/powerpc/kernel/setup_32.c21
-rw-r--r--arch/powerpc/mm/mem.c30
-rw-r--r--arch/powerpc/platforms/86xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c1
-rw-r--r--arch/powerpc/platforms/powermac/Makefile5
-rw-r--r--arch/powerpc/platforms/powermac/setup.c3
-rw-r--r--arch/powerpc/platforms/pseries/Makefile1
-rw-r--r--arch/powerpc/platforms/pseries/hotplug-memory.c141
-rw-r--r--arch/powerpc/sysdev/fsl_rio.c711
-rw-r--r--arch/powerpc/sysdev/fsl_rio.h20
-rw-r--r--drivers/macintosh/Kconfig8
-rw-r--r--drivers/macintosh/Makefile5
-rw-r--r--drivers/macintosh/windfarm_lm75_sensor.c6
-rw-r--r--drivers/macintosh/windfarm_max6690_sensor.c20
-rw-r--r--drivers/macintosh/windfarm_pm121.c1040
-rw-r--r--drivers/macintosh/windfarm_smu_controls.c4
-rw-r--r--drivers/net/rionet.c16
-rw-r--r--drivers/rapidio/Kconfig8
-rw-r--r--drivers/rapidio/rio-access.c10
-rw-r--r--drivers/rapidio/rio-scan.c55
-rw-r--r--drivers/rapidio/rio-sysfs.c3
-rw-r--r--drivers/rapidio/rio.c2
-rw-r--r--drivers/rapidio/rio.h9
-rw-r--r--include/asm-powerpc/processor.h6
-rw-r--r--include/asm-powerpc/rio.h (renamed from include/asm-ppc/rio.h)0
-rw-r--r--include/asm-powerpc/system.h24
-rw-r--r--include/linux/lmb.h4
-rw-r--r--include/linux/rio.h38
-rw-r--r--lib/lmb.c99
41 files changed, 2037 insertions, 388 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4e40c122bf26..3934e2659407 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -608,6 +608,19 @@ source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
+config HAS_RAPIDIO
+ bool
+ default n
+
+config RAPIDIO
+ bool "RapidIO support"
+ depends on HAS_RAPIDIO
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
endmenu
menu "Advanced setup"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 807a2dce6263..a7d24e692bab 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -118,7 +118,6 @@ config XMON_DISASSEMBLY
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
- depends on PPC64
help
If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 7f9b999843ce..1e4bfe9cadb9 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,6 +26,7 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
+ rapidio0 = &rapidio0;
};
cpus {
@@ -500,4 +501,15 @@
0x0 0x00100000>;
};
};
+ rapidio0: rapidio@f80c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ reg = <0xf80c0000 0x20000>;
+ ranges = <0 0 0xc0000000 0 0x20000000>;
+ interrupt-parent = <&mpic>;
+ /* err_irq bell_outb_irq bell_inb_irq
+ msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
+ interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+ };
};
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index a20501f89474..88338a9f5e95 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -696,6 +696,7 @@ CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 9177b21b1a95..d14cebf62bb0 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -73,7 +73,6 @@ pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o
obj-$(CONFIG_PCI_MSI) += msi.o
-obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_AUDIT) += audit.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 59044e7ed6f4..ec9228d687b0 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -63,6 +63,7 @@ int main(void)
#endif /* CONFIG_PPC64 */
DEFINE(KSP, offsetof(struct thread_struct, ksp));
+ DEFINE(KSP_LIMIT, offsetof(struct thread_struct, ksp_limit));
DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 84c868633068..0c8614d9875c 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -137,11 +137,12 @@ transfer_to_handler:
2: /* if from kernel, check interrupted DOZE/NAP mode and
* check for stack overflow
*/
- lwz r9,THREAD_INFO-THREAD(r12)
- cmplw r1,r9 /* if r1 <= current->thread_info */
+ lwz r9,KSP_LIMIT(r12)
+ cmplw r1,r9 /* if r1 <= ksp_limit */
ble- stack_ovf /* then the kernel stack overflowed */
5:
#ifdef CONFIG_6xx
+ rlwinm r9,r1,0,0,31-THREAD_SHIFT
tophys(r9,r9) /* check local flags */
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 215973a2c8d5..024805e1747d 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -239,6 +239,10 @@ instruction_access_slb_pSeries:
.globl system_call_pSeries
system_call_pSeries:
HMT_MEDIUM
+BEGIN_FTR_SECTION
+ cmpdi r0,0x1ebe
+ beq- 1f
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
mr r9,r13
mfmsr r10
mfspr r13,SPRN_SPRG3
@@ -253,6 +257,13 @@ system_call_pSeries:
rfid
b . /* prevent speculative execution */
+/* Fast LE/BE switch system call */
+1: mfspr r12,SPRN_SRR1
+ xori r12,r12,MSR_LE
+ mtspr SPRN_SRR1,r12
+ rfid /* return to userspace */
+ b .
+
STD_EXCEPTION_PSERIES(0xd00, single_step)
STD_EXCEPTION_PSERIES(0xe00, trap_0e)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 425616f92d18..2f73f705d564 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -307,6 +307,7 @@ void do_IRQ(struct pt_regs *regs)
if (curtp != irqtp) {
struct irq_desc *desc = irq_desc + irq;
void *handler = desc->handle_irq;
+ unsigned long saved_sp_limit = current->thread.ksp_limit;
if (handler == NULL)
handler = &__do_IRQ;
irqtp->task = curtp->task;
@@ -319,7 +320,10 @@ void do_IRQ(struct pt_regs *regs)
(irqtp->preempt_count & ~SOFTIRQ_MASK) |
(curtp->preempt_count & SOFTIRQ_MASK);
+ current->thread.ksp_limit = (unsigned long)irqtp +
+ _ALIGN_UP(sizeof(struct thread_info), 16);
call_handle_irq(irq, desc, irqtp, handler);
+ current->thread.ksp_limit = saved_sp_limit;
irqtp->task = NULL;
@@ -352,9 +356,7 @@ void __init init_IRQ(void)
{
if (ppc_md.init_IRQ)
ppc_md.init_IRQ();
-#ifdef CONFIG_PPC64
irq_ctx_init();
-#endif
}
@@ -383,11 +385,15 @@ void irq_ctx_init(void)
static inline void do_softirq_onstack(void)
{
struct thread_info *curtp, *irqtp;
+ unsigned long saved_sp_limit = current->thread.ksp_limit;
curtp = current_thread_info();
irqtp = softirq_ctx[smp_processor_id()];
irqtp->task = curtp->task;
+ current->thread.ksp_limit = (unsigned long)irqtp +
+ _ALIGN_UP(sizeof(struct thread_info), 16);
call_do_softirq(irqtp);
+ current->thread.ksp_limit = saved_sp_limit;
irqtp->task = NULL;
}
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 92ccc6fcc5b0..89aaaa6f3561 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -32,6 +32,31 @@
.text
+#ifdef CONFIG_IRQSTACKS
+_GLOBAL(call_do_softirq)
+ mflr r0
+ stw r0,4(r1)
+ stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
+ mr r1,r3
+ bl __do_softirq
+ lwz r1,0(r1)
+ lwz r0,4(r1)
+ mtlr r0
+ blr
+
+_GLOBAL(call_handle_irq)
+ mflr r0
+ stw r0,4(r1)
+ mtctr r6
+ stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5)
+ mr r1,r5
+ bctrl
+ lwz r1,0(r1)
+ lwz r0,4(r1)
+ mtlr r0
+ blr
+#endif /* CONFIG_IRQSTACKS */
+
/*
* This returns the high 64 bits of the product of two 64-bit numbers.
*/
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 6caad17ea72e..7de41c3948ec 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -589,6 +589,8 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
kregs = (struct pt_regs *) sp;
sp -= STACK_FRAME_OVERHEAD;
p->thread.ksp = sp;
+ p->thread.ksp_limit = (unsigned long)task_stack_page(p) +
+ _ALIGN_UP(sizeof(struct thread_info), 16);
#ifdef CONFIG_PPC64
if (cpu_has_feature(CPU_FTR_SLB)) {
diff --git a/arch/powerpc/kernel/rio.c b/arch/powerpc/kernel/rio.c
deleted file mode 100644
index 29487fedfc76..000000000000
--- a/arch/powerpc/kernel/rio.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * RapidIO PPC32 support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/rio.h>
-
-#include <asm/rio.h>
-
-/**
- * platform_rio_init - Do platform specific RIO init
- *
- * Any platform specific initialization of RapdIO
- * hardware is done here as well as registration
- * of any active master ports in the system.
- */
-void __attribute__ ((weak))
- platform_rio_init(void)
-{
- printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
-}
-
-/**
- * ppc_rio_init - Do PPC32 RIO init
- *
- * Calls platform-specific RIO init code and then calls
- * rio_init_mports() to initialize any master ports that
- * have been registered with the RIO subsystem.
- */
-static int __init ppc_rio_init(void)
-{
- printk(KERN_INFO "RIO: RapidIO init\n");
-
- /* Platform specific initialization */
- platform_rio_init();
-
- /* Enumerate all registered ports */
- rio_init_mports();
-
- return 0;
-}
-
-subsys_initcall(ppc_rio_init);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 36f6779c88d4..5112a4aa801d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -16,6 +16,7 @@
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/console.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/prom.h>
@@ -229,6 +230,24 @@ int __init ppc_init(void)
arch_initcall(ppc_init);
+#ifdef CONFIG_IRQSTACKS
+static void __init irqstack_early_init(void)
+{
+ unsigned int i;
+
+ /* interrupt stacks must be in lowmem, we get that for free on ppc32
+ * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+ for_each_possible_cpu(i) {
+ softirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ hardirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ }
+}
+#else
+#define irqstack_early_init()
+#endif
+
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
@@ -286,6 +305,8 @@ void __init setup_arch(char **cmdline_p)
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
+ irqstack_early_init();
+
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index d9e37f365b54..f67e118116fa 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -154,19 +154,35 @@ out:
/*
* walk_memory_resource() needs to make sure there is no holes in a given
- * memory range. On PPC64, since this range comes from /sysfs, the range
- * is guaranteed to be valid, non-overlapping and can not contain any
- * holes. By the time we get here (memory add or remove), /proc/device-tree
- * is updated and correct. Only reason we need to check against device-tree
- * would be if we allow user-land to specify a memory range through a
- * system call/ioctl etc. instead of doing offline/online through /sysfs.
+ * memory range. PPC64 does not maintain the memory layout in /proc/iomem.
+ * Instead it maintains it in lmb.memory structures. Walk through the
+ * memory regions, find holes and callback for contiguous regions.
*/
int
walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
int (*func)(unsigned long, unsigned long, void *))
{
- return (*func)(start_pfn, nr_pages, arg);
+ struct lmb_property res;
+ unsigned long pfn, len;
+ u64 end;
+ int ret = -1;
+
+ res.base = (u64) start_pfn << PAGE_SHIFT;
+ res.size = (u64) nr_pages << PAGE_SHIFT;
+
+ end = res.base + res.size - 1;
+ while ((res.base < end) && (lmb_find(&res) >= 0)) {
+ pfn = (unsigned long)(res.base >> PAGE_SHIFT);
+ len = (unsigned long)(res.size >> PAGE_SHIFT);
+ ret = (*func)(pfn, len, arg);
+ if (ret)
+ break;
+ res.base += (res.size + 1);
+ res.size = (end - res.base + 1);
+ }
+ return ret;
}
+EXPORT_SYMBOL_GPL(walk_memory_resource);
#endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 7442c58d44f5..053f49a1dcae 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -8,6 +8,7 @@ config MPC8641_HPCN
select PPC_I8259
select DEFAULT_UIMAGE
select FSL_ULI1575
+ select HAS_RAPIDIO
help
This option enables support for the MPC8641 HPCN board.
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f947f555fd46..f13704aabbea 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -221,6 +221,7 @@ mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "fsl,rapidio-delta", },
{},
};
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 78093d7f97af..4d72c8f72159 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -6,7 +6,10 @@ obj-y += pic.o setup.o time.o feature.o pci.o \
obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o
obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o
obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o
-obj-$(CONFIG_NVRAM) += nvram.o
+# CONFIG_NVRAM is an arch. independant tristate symbol, for pmac32 we really
+# need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really
+# CONFIG_NVRAM=y
+obj-$(CONFIG_NVRAM:m=y) += nvram.o
# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff
obj-$(CONFIG_PPC64) += nvram.o
obj-$(CONFIG_PPC32) += bootx_init.o
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index bf44c5441a36..00bd0166d07f 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -337,7 +337,8 @@ static void __init pmac_setup_arch(void)
find_via_pmu();
smu_init();
-#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64)
+#if defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) || \
+ defined(CONFIG_PPC64)
pmac_nvram_init();
#endif
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index bd2593ed28dd..554c6e42ef2a 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI) += pci.o pci_dlpar.o
obj-$(CONFIG_PCI_MSI) += msi.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
+obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
new file mode 100644
index 000000000000..3c5727dd5aa5
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -0,0 +1,141 @@
+/*
+ * pseries Memory Hotplug infrastructure.
+ *
+ * Copyright (C) 2008 Badari Pulavarty, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/of.h>
+#include <linux/lmb.h>
+#include <asm/firmware.h>
+#include <asm/machdep.h>
+#include <asm/pSeries_reconfig.h>
+
+static int pseries_remove_memory(struct device_node *np)
+{
+ const char *type;
+ const unsigned int *my_index;
+ const unsigned int *regs;
+ u64 start_pfn, start;
+ struct zone *zone;
+ int ret = -EINVAL;
+
+ /*
+ * Check to see if we are actually removing memory
+ */
+ type = of_get_property(np, "device_type", NULL);
+ if (type == NULL || strcmp(type, "memory") != 0)
+ return 0;
+
+ /*
+ * Find the memory index and size of the removing section
+ */
+ my_index = of_get_property(np, "ibm,my-drc-index", NULL);
+ if (!my_index)
+ return ret;
+
+ regs = of_get_property(np, "reg", NULL);
+ if (!regs)
+ return ret;
+
+ start_pfn = section_nr_to_pfn(*my_index & 0xffff);
+ zone = page_zone(pfn_to_page(start_pfn));
+
+ /*
+ * Remove section mappings and sysfs entries for the
+ * section of the memory we are removing.
+ *
+ * NOTE: Ideally, this should be done in generic code like
+ * remove_memory(). But remove_memory() gets called by writing
+ * to sysfs "state" file and we can't remove sysfs entries
+ * while writing to it. So we have to defer it to here.
+ */
+ ret = __remove_pages(zone, start_pfn, regs[3] >> PAGE_SHIFT);
+ if (ret)
+ return ret;
+
+ /*
+ * Update memory regions for memory remove
+ */
+ lmb_remove(start_pfn << PAGE_SHIFT, regs[3]);
+
+ /*
+ * Remove htab bolted mappings for this section of memory
+ */
+ start = (unsigned long)__va(start_pfn << PAGE_SHIFT);
+ ret = remove_section_mapping(start, start + regs[3]);
+ return ret;
+}
+
+static int pseries_add_memory(struct device_node *np)
+{
+ const char *type;
+ const unsigned int *my_index;
+ const unsigned int *regs;
+ u64 start_pfn;
+ int ret = -EINVAL;
+
+ /*
+ * Check to see if we are actually adding memory
+ */
+ type = of_get_property(np, "device_type", NULL);
+ if (type == NULL || strcmp(type, "memory") != 0)
+ return 0;
+
+ /*
+ * Find the memory index and size of the added section
+ */
+ my_index = of_get_property(np, "ibm,my-drc-index", NULL);
+ if (!my_index)
+ return ret;
+
+ regs = of_get_property(np, "reg", NULL);
+ if (!regs)
+ return ret;
+
+ start_pfn = section_nr_to_pfn(*my_index & 0xffff);
+
+ /*
+ * Update memory region to represent the memory add
+ */
+ lmb_add(start_pfn << PAGE_SHIFT, regs[3]);
+ return 0;
+}
+
+static int pseries_memory_notifier(struct notifier_block *nb,
+ unsigned long action, void *node)
+{
+ int err = NOTIFY_OK;
+
+ switch (action) {
+ case PSERIES_RECONFIG_ADD:
+ if (pseries_add_memory(node))
+ err = NOTIFY_BAD;
+ break;
+ case PSERIES_RECONFIG_REMOVE:
+ if (pseries_remove_memory(node))
+ err = NOTIFY_BAD;
+ break;
+ default:
+ err = NOTIFY_DONE;
+ break;
+ }
+ return err;
+}
+
+static struct notifier_block pseries_mem_nb = {
+ .notifier_call = pseries_memory_notifier,
+};
+
+static int __init pseries_memory_hotplug_init(void)
+{
+ if (firmware_has_feature(FW_FEATURE_LPAR))
+ pSeries_reconfig_notifier_register(&pseries_mem_nb);
+
+ return 0;
+}
+machine_device_initcall(pseries, pseries_memory_hotplug_init);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index af2425e4655f..3d920376f58e 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1,5 +1,8 @@
/*
- * MPC85xx RapidIO support
+ * Freescale MPC85xx/MPC86xx RapidIO support
+ *
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
*
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
@@ -17,12 +20,23 @@
#include <linux/interrupt.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
+#include <linux/of_platform.h>
+#include <linux/delay.h>
#include <asm/io.h>
-#define RIO_REGS_BASE (CCSRBAR + 0xc0000)
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq)
+#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
+#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
+
#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_MSG_REGS_OFFSET 0x11000
+#define RIO_P_MSG_REGS_OFFSET 0x11000
+#define RIO_S_MSG_REGS_OFFSET 0x13000
+#define RIO_ESCSR 0x158
+#define RIO_CCSR 0x15c
+#define RIO_ISR_AACR 0x10120
+#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
#define RIO_MAINT_WIN_SIZE 0x400000
#define RIO_DBELL_WIN_SIZE 0x1000
@@ -50,18 +64,18 @@
#define DOORBELL_DSR_TE 0x00000080
#define DOORBELL_DSR_QFI 0x00000010
#define DOORBELL_DSR_DIQI 0x00000001
-#define DOORBELL_TID_OFFSET 0x03
-#define DOORBELL_SID_OFFSET 0x05
+#define DOORBELL_TID_OFFSET 0x02
+#define DOORBELL_SID_OFFSET 0x04
#define DOORBELL_INFO_OFFSET 0x06
#define DOORBELL_MESSAGE_SIZE 0x08
-#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
struct rio_atmu_regs {
u32 rowtar;
- u32 pad1;
+ u32 rowtear;
u32 rowbar;
u32 pad2;
u32 rowar;
@@ -87,7 +101,15 @@ struct rio_msg_regs {
u32 ifqdpar;
u32 pad6;
u32 ifqepar;
- u32 pad7[250];
+ u32 pad7[226];
+ u32 odmr;
+ u32 odsr;
+ u32 res0[4];
+ u32 oddpr;
+ u32 oddatr;
+ u32 res1[3];
+ u32 odretcr;
+ u32 res2[12];
u32 dmr;
u32 dsr;
u32 pad8;
@@ -112,20 +134,12 @@ struct rio_tx_desc {
u32 res4;
};
-static u32 regs_win;
-static struct rio_atmu_regs *atmu_regs;
-static struct rio_atmu_regs *maint_atmu_regs;
-static struct rio_atmu_regs *dbell_atmu_regs;
-static u32 dbell_win;
-static u32 maint_win;
-static struct rio_msg_regs *msg_regs;
-
-static struct rio_dbell_ring {
+struct rio_dbell_ring {
void *virt;
dma_addr_t phys;
-} dbell_ring;
+};
-static struct rio_msg_tx_ring {
+struct rio_msg_tx_ring {
void *virt;
dma_addr_t phys;
void *virt_buffer[RIO_MAX_TX_RING_SIZE];
@@ -133,19 +147,35 @@ static struct rio_msg_tx_ring {
int tx_slot;
int size;
void *dev_id;
-} msg_tx_ring;
+};
-static struct rio_msg_rx_ring {
+struct rio_msg_rx_ring {
void *virt;
dma_addr_t phys;
void *virt_buffer[RIO_MAX_RX_RING_SIZE];
int rx_slot;
int size;
void *dev_id;
-} msg_rx_ring;
+};
+
+struct rio_priv {
+ void __iomem *regs_win;
+ struct rio_atmu_regs __iomem *atmu_regs;
+ struct rio_atmu_regs __iomem *maint_atmu_regs;
+ struct rio_atmu_regs __iomem *dbell_atmu_regs;
+ void __iomem *dbell_win;
+ void __iomem *maint_win;
+ struct rio_msg_regs __iomem *msg_regs;
+ struct rio_dbell_ring dbell_ring;
+ struct rio_msg_tx_ring msg_tx_ring;
+ struct rio_msg_rx_ring msg_rx_ring;
+ int bellirq;
+ int txirq;
+ int rxirq;
+};
/**
- * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
* @index: ID of RapidIO interface
* @destid: Destination ID of target device
* @data: 16-bit info field of RapidIO doorbell message
@@ -153,18 +183,34 @@ static struct rio_msg_rx_ring {
* Sends a MPC85xx doorbell message. Returns %0 on success or
* %-EINVAL on failure.
*/
-static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+static int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data)
{
- pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
index, destid, data);
- out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
- out_be16((void *)(dbell_win), data);
+ switch (mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(priv->dbell_win, data);
+ break;
+ case RIO_PHY_SERIAL:
+ /* In the serial version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&priv->msg_regs->odmr, 0x00000000);
+ out_be32(&priv->msg_regs->odretcr, 0x00000004);
+ out_be32(&priv->msg_regs->oddpr, destid << 16);
+ out_be32(&priv->msg_regs->oddatr, data);
+ out_be32(&priv->msg_regs->odmr, 0x00000001);
+ break;
+ }
return 0;
}
/**
- * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * fsl_local_config_read - Generate a MPC85xx local config space read
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -173,17 +219,19 @@ static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
* Generates a MPC85xx local configuration space read. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
+static int fsl_local_config_read(struct rio_mport *mport,
+ int index, u32 offset, int len, u32 *data)
{
- pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
offset);
- *data = in_be32((void *)(regs_win + offset));
+ *data = in_be32(priv->regs_win + offset);
return 0;
}
/**
- * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * fsl_local_config_write - Generate a MPC85xx local config space write
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -192,18 +240,20 @@ static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
* Generates a MPC85xx local configuration space write. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+static int fsl_local_config_write(struct rio_mport *mport,
+ int index, u32 offset, int len, u32 data)
{
+ struct rio_priv *priv = mport->priv;
pr_debug
- ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
+ ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
index, offset, data);
- out_be32((void *)(regs_win + offset), data);
+ out_be32(priv->regs_win + offset, data);
return 0;
}
/**
- * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -215,18 +265,19 @@ static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
* success or %-EINVAL on failure.
*/
static int
-mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
- u32 * val)
+fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 *val)
{
+ struct rio_priv *priv = mport->priv;
u8 *data;
pr_debug
- ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+ ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
index, destid, hopcount, offset, len);
- out_be32((void *)&maint_atmu_regs->rowtar,
+ out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
- data = (u8 *) maint_win + offset;
+ data = (u8 *) priv->maint_win + offset;
switch (len) {
case 1:
*val = in_8((u8 *) data);
@@ -243,7 +294,7 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
}
/**
- * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -255,17 +306,18 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
* success or %-EINVAL on failure.
*/
static int
-mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
- int len, u32 val)
+fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 val)
{
+ struct rio_priv *priv = mport->priv;
u8 *data;
pr_debug
- ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
index, destid, hopcount, offset, len, val);
- out_be32((void *)&maint_atmu_regs->rowtar,
+ out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
- data = (u8 *) maint_win + offset;
+ data = (u8 *) priv->maint_win + offset;
switch (len) {
case 1:
out_8((u8 *) data, val);
@@ -296,9 +348,10 @@ int
rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
void *buffer, size_t len)
{
+ struct rio_priv *priv = mport->priv;
u32 omr;
- struct rio_tx_desc *desc =
- (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
+ struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt
+ + priv->msg_tx_ring.tx_slot;
int ret = 0;
pr_debug
@@ -311,31 +364,43 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
}
/* Copy and clear rest of buffer */
- memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
+ memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer,
+ len);
if (len < (RIO_MAX_MSG_SIZE - 4))
- memset((void *)((u32) msg_tx_ring.
- virt_buffer[msg_tx_ring.tx_slot] + len), 0,
- RIO_MAX_MSG_SIZE - len);
+ memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
+ + len, 0, RIO_MAX_MSG_SIZE - len);
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
+ switch (mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ /* Set mbox field for message */
+ desc->dport = mbox & 0x3;
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
+ /* Enable EOMI interrupt, set priority, and set destid */
+ desc->dattr = 0x28000000 | (rdev->destid << 2);
+ break;
+ case RIO_PHY_SERIAL:
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | (mbox & 0x3);
+
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000;
+ break;
+ }
/* Set transfer size aligned to next power of 2 (in double words) */
desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
/* Set snooping and source buffer address */
- desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
+ desc->saddr = 0x00000004
+ | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
/* Increment enqueue pointer */
- omr = in_be32((void *)&msg_regs->omr);
- out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+ omr = in_be32(&priv->msg_regs->omr);
+ out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
/* Go to next descriptor */
- if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
- msg_tx_ring.tx_slot = 0;
+ if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
+ priv->msg_tx_ring.tx_slot = 0;
out:
return ret;
@@ -344,7 +409,7 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
/**
- * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -352,32 +417,34 @@ EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
* mailbox event handler and acks the interrupt occurrence.
*/
static irqreturn_t
-mpc85xx_rio_tx_handler(int irq, void *dev_instance)
+fsl_rio_tx_handler(int irq, void *dev_instance)
{
int osr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- osr = in_be32((void *)&msg_regs->osr);
+ osr = in_be32(&priv->msg_regs->osr);
if (osr & RIO_MSG_OSR_TE) {
pr_info("RIO: outbound message transmission error\n");
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
goto out;
}
if (osr & RIO_MSG_OSR_QOI) {
pr_info("RIO: outbound message queue overflow\n");
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
goto out;
}
if (osr & RIO_MSG_OSR_EOMI) {
- u32 dqp = in_be32((void *)&msg_regs->odqdpar);
- int slot = (dqp - msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
+ u32 dqp = in_be32(&priv->msg_regs->odqdpar);
+ int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
+ port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1,
+ slot);
/* Ack the end-of-message interrupt */
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
}
out:
@@ -398,6 +465,7 @@ mpc85xx_rio_tx_handler(int irq, void *dev_instance)
int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
{
int i, j, rc = 0;
+ struct rio_priv *priv = mport->priv;
if ((entries < RIO_MIN_TX_RING_SIZE) ||
(entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
@@ -406,54 +474,53 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
}
/* Initialize shadow copy ring */
- msg_tx_ring.dev_id = dev_id;
- msg_tx_ring.size = entries;
-
- for (i = 0; i < msg_tx_ring.size; i++) {
- if (!
- (msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- &msg_tx_ring.phys_buffer[i],
- GFP_KERNEL))) {
+ priv->msg_tx_ring.dev_id = dev_id;
+ priv->msg_tx_ring.size = entries;
+
+ for (i = 0; i < priv->msg_tx_ring.size; i++) {
+ priv->msg_tx_ring.virt_buffer[i] =
+ dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
+ if (!priv->msg_tx_ring.virt_buffer[i]) {
rc = -ENOMEM;
- for (j = 0; j < msg_tx_ring.size; j++)
- if (msg_tx_ring.virt_buffer[j])
+ for (j = 0; j < priv->msg_tx_ring.size; j++)
+ if (priv->msg_tx_ring.virt_buffer[j])
dma_free_coherent(NULL,
- RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.
- virt_buffer[j],
- msg_tx_ring.
- phys_buffer[j]);
+ RIO_MSG_BUFFER_SIZE,
+ priv->msg_tx_ring.
+ virt_buffer[j],
+ priv->msg_tx_ring.
+ phys_buffer[j]);
goto out;
}
}
/* Initialize outbound message descriptor ring */
- if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
- msg_tx_ring.size *
- RIO_MSG_DESC_SIZE,
- &msg_tx_ring.phys,
- GFP_KERNEL))) {
+ priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ &priv->msg_tx_ring.phys, GFP_KERNEL);
+ if (!priv->msg_tx_ring.virt) {
rc = -ENOMEM;
goto out_dma;
}
- memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
- msg_tx_ring.tx_slot = 0;
+ memset(priv->msg_tx_ring.virt, 0,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+ priv->msg_tx_ring.tx_slot = 0;
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
- out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
+ out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
+ out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
/* Configure for snooping */
- out_be32((void *)&msg_regs->osar, 0x00000004);
+ out_be32(&priv->msg_regs->osar, 0x00000004);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->osr, 0x000000b3);
+ out_be32(&priv->msg_regs->osr, 0x000000b3);
/* Hook up outbound message handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
- "msg_tx", (void *)mport)) < 0)
+ rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
+ "msg_tx", (void *)mport);
+ if (rc < 0)
goto out_irq;
/*
@@ -463,28 +530,28 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
* Chaining mode
* Disable
*/
- out_be32((void *)&msg_regs->omr, 0x00100220);
+ out_be32(&priv->msg_regs->omr, 0x00100220);
/* Set number of entries */
- out_be32((void *)&msg_regs->omr,
- in_be32((void *)&msg_regs->omr) |
+ out_be32(&priv->msg_regs->omr,
+ in_be32(&priv->msg_regs->omr) |
((get_bitmask_order(entries) - 2) << 12));
/* Now enable the unit */
- out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
+ out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1);
out:
return rc;
out_irq:
- dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- msg_tx_ring.virt, msg_tx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
out_dma:
- for (i = 0; i < msg_tx_ring.size; i++)
+ for (i = 0; i < priv->msg_tx_ring.size; i++)
dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.virt_buffer[i],
- msg_tx_ring.phys_buffer[i]);
+ priv->msg_tx_ring.virt_buffer[i],
+ priv->msg_tx_ring.phys_buffer[i]);
return rc;
}
@@ -499,19 +566,20 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr
*/
void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
{
+ struct rio_priv *priv = mport->priv;
/* Disable inbound message unit */
- out_be32((void *)&msg_regs->omr, 0);
+ out_be32(&priv->msg_regs->omr, 0);
/* Free ring */
- dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- msg_tx_ring.virt, msg_tx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
/* Free interrupt */
- free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
+ free_irq(IRQ_RIO_TX(mport), (void *)mport);
}
/**
- * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -519,16 +587,17 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
* mailbox event handler and acks the interrupt occurrence.
*/
static irqreturn_t
-mpc85xx_rio_rx_handler(int irq, void *dev_instance)
+fsl_rio_rx_handler(int irq, void *dev_instance)
{
int isr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- isr = in_be32((void *)&msg_regs->isr);
+ isr = in_be32(&priv->msg_regs->isr);
if (isr & RIO_MSG_ISR_TE) {
pr_info("RIO: inbound message reception error\n");
- out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
+ out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE);
goto out;
}
@@ -540,10 +609,10 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance)
* make the callback with an unknown/invalid mailbox number
* argument.
*/
- port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
+ port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
/* Ack the queueing interrupt */
- out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
+ out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
}
out:
@@ -564,6 +633,7 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance)
int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
{
int i, rc = 0;
+ struct rio_priv *priv = mport->priv;
if ((entries < RIO_MIN_RX_RING_SIZE) ||
(entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
@@ -572,36 +642,35 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
}
/* Initialize client buffer ring */
- msg_rx_ring.dev_id = dev_id;
- msg_rx_ring.size = entries;
- msg_rx_ring.rx_slot = 0;
- for (i = 0; i < msg_rx_ring.size; i++)
- msg_rx_ring.virt_buffer[i] = NULL;
+ priv->msg_rx_ring.dev_id = dev_id;
+ priv->msg_rx_ring.size = entries;
+ priv->msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < priv->msg_rx_ring.size; i++)
+ priv->msg_rx_ring.virt_buffer[i] = NULL;
/* Initialize inbound message ring */
- if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
- msg_rx_ring.size *
- RIO_MAX_MSG_SIZE,
- &msg_rx_ring.phys,
- GFP_KERNEL))) {
+ priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ &priv->msg_rx_ring.phys, GFP_KERNEL);
+ if (!priv->msg_rx_ring.virt) {
rc = -ENOMEM;
goto out;
}
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
- out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
+ out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
+ out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->isr, 0x00000091);
+ out_be32(&priv->msg_regs->isr, 0x00000091);
/* Hook up inbound message handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
- "msg_rx", (void *)mport)) < 0) {
+ rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+ "msg_rx", (void *)mport);
+ if (rc < 0) {
dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.virt_buffer[i],
- msg_tx_ring.phys_buffer[i]);
+ priv->msg_tx_ring.virt_buffer[i],
+ priv->msg_tx_ring.phys_buffer[i]);
goto out;
}
@@ -612,15 +681,13 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
* Unmask all interrupt sources
* Disable
*/
- out_be32((void *)&msg_regs->imr, 0x001b0060);
+ out_be32(&priv->msg_regs->imr, 0x001b0060);
/* Set number of queue entries */
- out_be32((void *)&msg_regs->imr,
- in_be32((void *)&msg_regs->imr) |
- ((get_bitmask_order(entries) - 2) << 12));
+ setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
/* Now enable the unit */
- out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
+ setbits32(&priv->msg_regs->imr, 0x1);
out:
return rc;
@@ -636,15 +703,16 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri
*/
void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
{
+ struct rio_priv *priv = mport->priv;
/* Disable inbound message unit */
- out_be32((void *)&msg_regs->imr, 0);
+ out_be32(&priv->msg_regs->imr, 0);
/* Free ring */
- dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- msg_rx_ring.virt, msg_rx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
/* Free interrupt */
- free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
+ free_irq(IRQ_RIO_RX(mport), (void *)mport);
}
/**
@@ -659,21 +727,22 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
{
int rc = 0;
+ struct rio_priv *priv = mport->priv;
pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
- msg_rx_ring.rx_slot);
+ priv->msg_rx_ring.rx_slot);
- if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
+ if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) {
printk(KERN_ERR
"RIO: error adding inbound buffer %d, buffer exists\n",
- msg_rx_ring.rx_slot);
+ priv->msg_rx_ring.rx_slot);
rc = -EINVAL;
goto out;
}
- msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
- if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
- msg_rx_ring.rx_slot = 0;
+ priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
+ if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
+ priv->msg_rx_ring.rx_slot = 0;
out:
return rc;
@@ -691,20 +760,21 @@ EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
*/
void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
{
- u32 imr;
+ struct rio_priv *priv = mport->priv;
u32 phys_buf, virt_buf;
void *buf = NULL;
int buf_idx;
- phys_buf = in_be32((void *)&msg_regs->ifqdpar);
+ phys_buf = in_be32(&priv->msg_regs->ifqdpar);
/* If no more messages, then bail out */
- if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
+ if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
goto out2;
- virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
- buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
- buf = msg_rx_ring.virt_buffer[buf_idx];
+ virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf
+ - priv->msg_rx_ring.phys);
+ buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = priv->msg_rx_ring.virt_buffer[buf_idx];
if (!buf) {
printk(KERN_ERR
@@ -716,11 +786,10 @@ void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
/* Clear the available buffer */
- msg_rx_ring.virt_buffer[buf_idx] = NULL;
+ priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
out1:
- imr = in_be32((void *)&msg_regs->imr);
- out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
+ setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
out2:
return buf;
@@ -729,7 +798,7 @@ void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
/**
- * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
@@ -737,31 +806,31 @@ EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
* doorbell event handlers and executes a matching event handler.
*/
static irqreturn_t
-mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
+fsl_rio_dbell_handler(int irq, void *dev_instance)
{
int dsr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- dsr = in_be32((void *)&msg_regs->dsr);
+ dsr = in_be32(&priv->msg_regs->dsr);
if (dsr & DOORBELL_DSR_TE) {
pr_info("RIO: doorbell reception error\n");
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
goto out;
}
if (dsr & DOORBELL_DSR_QFI) {
pr_info("RIO: doorbell queue full\n");
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
goto out;
}
/* XXX Need to check/dispatch until queue empty */
if (dsr & DOORBELL_DSR_DIQI) {
u32 dmsg =
- (u32) dbell_ring.virt +
- (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
- u32 dmr;
+ (u32) priv->dbell_ring.virt +
+ (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
struct rio_dbell *dbell;
int found = 0;
@@ -784,9 +853,8 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
}
- dmr = in_be32((void *)&msg_regs->dmr);
- out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
+ setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
}
out:
@@ -794,21 +862,22 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
}
/**
- * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * fsl_rio_doorbell_init - MPC85xx doorbell interface init
* @mport: Master port implementing the inbound doorbell unit
*
* Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
* or %-ENOMEM on failure.
*/
-static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+static int fsl_rio_doorbell_init(struct rio_mport *mport)
{
+ struct rio_priv *priv = mport->priv;
int rc = 0;
/* Map outbound doorbell window immediately after maintenance window */
- if (!(dbell_win =
- (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
- RIO_DBELL_WIN_SIZE))) {
+ priv->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+ RIO_DBELL_WIN_SIZE);
+ if (!priv->dbell_win) {
printk(KERN_ERR
"RIO: unable to map outbound doorbell window\n");
rc = -ENOMEM;
@@ -816,37 +885,36 @@ static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
}
/* Initialize inbound doorbells */
- if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
- 512 * DOORBELL_MESSAGE_SIZE,
- &dbell_ring.phys,
- GFP_KERNEL))) {
+ priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 *
+ DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
+ if (!priv->dbell_ring.virt) {
printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
rc = -ENOMEM;
- iounmap((void *)dbell_win);
+ iounmap(priv->dbell_win);
goto out;
}
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
- out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
+ out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
+ out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->dsr, 0x00000091);
+ out_be32(&priv->msg_regs->dsr, 0x00000091);
/* Hook up doorbell handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
- "dbell_rx", (void *)mport) < 0)) {
- iounmap((void *)dbell_win);
+ rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
+ "dbell_rx", (void *)mport);
+ if (rc < 0) {
+ iounmap(priv->dbell_win);
dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
- dbell_ring.virt, dbell_ring.phys);
+ priv->dbell_ring.virt, priv->dbell_ring.phys);
printk(KERN_ERR
"MPC85xx RIO: unable to request inbound doorbell irq");
goto out;
}
/* Configure doorbells for snooping, 512 entries, and enable */
- out_be32((void *)&msg_regs->dmr, 0x00108161);
+ out_be32(&priv->msg_regs->dmr, 0x00108161);
out:
return rc;
@@ -854,7 +922,7 @@ static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
static char *cmdline = NULL;
-static int mpc85xx_rio_get_hdid(int index)
+static int fsl_rio_get_hdid(int index)
{
/* XXX Need to parse multiple entries in some format */
if (!cmdline)
@@ -863,7 +931,7 @@ static int mpc85xx_rio_get_hdid(int index)
return simple_strtol(cmdline, NULL, 0);
}
-static int mpc85xx_rio_get_cmdline(char *s)
+static int fsl_rio_get_cmdline(char *s)
{
if (!s)
return 0;
@@ -872,61 +940,266 @@ static int mpc85xx_rio_get_cmdline(char *s)
return 1;
}
-__setup("riohdid=", mpc85xx_rio_get_cmdline);
+__setup("riohdid=", fsl_rio_get_cmdline);
+
+static inline void fsl_rio_info(struct device *dev, u32 ccsr)
+{
+ const char *str;
+ if (ccsr & 1) {
+ /* Serial phy */
+ switch (ccsr >> 30) {
+ case 0:
+ str = "1";
+ break;
+ case 1:
+ str = "4";
+ break;
+ default:
+ str = "Unknown";
+ break;;
+ }
+ dev_info(dev, "Hardware port width: %s\n", str);
+
+ switch ((ccsr >> 27) & 7) {
+ case 0:
+ str = "Single-lane 0";
+ break;
+ case 1:
+ str = "Single-lane 2";
+ break;
+ case 2:
+ str = "Four-lane";
+ break;
+ default:
+ str = "Unknown";
+ break;
+ }
+ dev_info(dev, "Training connection status: %s\n", str);
+ } else {
+ /* Parallel phy */
+ if (!(ccsr & 0x80000000))
+ dev_info(dev, "Output port operating in 8-bit mode\n");
+ if (!(ccsr & 0x08000000))
+ dev_info(dev, "Input port operating in 8-bit mode\n");
+ }
+}
/**
- * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
- * @law_start: Starting physical address of RapidIO LAW
- * @law_size: Size of RapidIO LAW
+ * fsl_rio_setup - Setup MPC85xx RapidIO interface
+ * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
*
* Initializes MPC85xx RapidIO hardware interface, configures
* master port with system-specific info, and registers the
* master port with the RapidIO subsystem.
*/
-void mpc85xx_rio_setup(int law_start, int law_size)
+int fsl_rio_setup(struct of_device *dev)
{
struct rio_ops *ops;
struct rio_mport *port;
+ struct rio_priv *priv;
+ int rc = 0;
+ const u32 *dt_range, *cell;
+ struct resource regs;
+ int rlen;
+ u32 ccsr;
+ u64 law_start, law_size;
+ int paw, aw, sw;
+
+ if (!dev->node) {
+ dev_err(&dev->dev, "Device OF-Node is NULL");
+ return -EFAULT;
+ }
+
+ rc = of_address_to_resource(dev->node, 0, &regs);
+ if (rc) {
+ dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+ dev->node->full_name);
+ return -EFAULT;
+ }
+ dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
+ dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n", regs.start,
+ regs.end - regs.start + 1);
+
+ dt_range = of_get_property(dev->node, "ranges", &rlen);
+ if (!dt_range) {
+ dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
+ dev->node->full_name);
+ return -EFAULT;
+ }
+
+ /* Get node address wide */
+ cell = of_get_property(dev->node, "#address-cells", NULL);
+ if (cell)
+ aw = *cell;
+ else
+ aw = of_n_addr_cells(dev->node);
+ /* Get node size wide */
+ cell = of_get_property(dev->node, "#size-cells", NULL);
+ if (cell)
+ sw = *cell;
+ else
+ sw = of_n_size_cells(dev->node);
+ /* Get parent address wide wide */
+ paw = of_n_addr_cells(dev->node);
+
+ law_start = of_read_number(dt_range + aw, paw);
+ law_size = of_read_number(dt_range + aw + paw, sw);
+
+ dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
+ law_start, law_size);
ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
- ops->lcread = mpc85xx_local_config_read;
- ops->lcwrite = mpc85xx_local_config_write;
- ops->cread = mpc85xx_rio_config_read;
- ops->cwrite = mpc85xx_rio_config_write;
- ops->dsend = mpc85xx_rio_doorbell_send;
+ ops->lcread = fsl_local_config_read;
+ ops->lcwrite = fsl_local_config_write;
+ ops->cread = fsl_rio_config_read;
+ ops->cwrite = fsl_rio_config_write;
+ ops->dsend = fsl_rio_doorbell_send;
- port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
port->id = 0;
port->index = 0;
+
+ priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+ if (!priv) {
+ printk(KERN_ERR "Can't alloc memory for 'priv'\n");
+ rc = -ENOMEM;
+ goto err;
+ }
+
INIT_LIST_HEAD(&port->dbells);
port->iores.start = law_start;
port->iores.end = law_start + law_size;
port->iores.flags = IORESOURCE_MEM;
+ priv->bellirq = irq_of_parse_and_map(dev->node, 2);
+ priv->txirq = irq_of_parse_and_map(dev->node, 3);
+ priv->rxirq = irq_of_parse_and_map(dev->node, 4);
+ dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq,
+ priv->txirq, priv->rxirq);
+
rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
strcpy(port->name, "RIO0 mport");
port->ops = ops;
- port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+ port->host_deviceid = fsl_rio_get_hdid(port->id);
+ port->priv = priv;
rio_register_mport(port);
- regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
- atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
- maint_atmu_regs = atmu_regs + 1;
- dbell_atmu_regs = atmu_regs + 2;
- msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
+ priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1);
+
+ /* Probe the master port phy type */
+ ccsr = in_be32(priv->regs_win + RIO_CCSR);
+ port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
+ dev_info(&dev->dev, "RapidIO PHY type: %s\n",
+ (port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
+ ((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
+ "unknown"));
+ /* Checking the port training status */
+ if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
+ dev_err(&dev->dev, "Port is not ready. "
+ "Try to restart connection...\n");
+ switch (port->phy_type) {
+ case RIO_PHY_SERIAL:
+ /* Disable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0);
+ /* Set 1x lane */
+ setbits32(priv->regs_win + RIO_CCSR, 0x02000000);
+ /* Enable ports */
+ setbits32(priv->regs_win + RIO_CCSR, 0x00600000);
+ break;
+ case RIO_PHY_PARALLEL:
+ /* Disable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0x22000000);
+ /* Enable ports */
+ out_be32(priv->regs_win + RIO_CCSR, 0x44000000);
+ break;
+ }
+ msleep(100);
+ if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
+ dev_err(&dev->dev, "Port restart failed.\n");
+ rc = -ENOLINK;
+ goto err;
+ }
+ dev_info(&dev->dev, "Port restart success!\n");
+ }
+ fsl_rio_info(&dev->dev, ccsr);
+
+ port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+ & RIO_PEF_CTLS) >> 4;
+ dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
+ priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ + RIO_ATMU_REGS_OFFSET);
+ priv->maint_atmu_regs = priv->atmu_regs + 1;
+ priv->dbell_atmu_regs = priv->atmu_regs + 2;
+ priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
+ ((port->phy_type == RIO_PHY_SERIAL) ?
+ RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
+
+ /* Set to receive any dist ID for serial RapidIO controller. */
+ if (port->phy_type == RIO_PHY_SERIAL)
+ out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
/* Configure maintenance transaction window */
- out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
- out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
+ out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
+ out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);
- maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
+ priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
/* Configure outbound doorbell window */
- out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
- out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
- mpc85xx_rio_doorbell_init(port);
+ out_be32(&priv->dbell_atmu_regs->rowbar, 0x000c0400);
+ out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
+ fsl_rio_doorbell_init(port);
+
+ return 0;
+err:
+ if (priv)
+ iounmap(priv->regs_win);
+ kfree(ops);
+ kfree(priv);
+ kfree(port);
+ return rc;
+}
+
+/* The probe function for RapidIO peer-to-peer network.
+ */
+static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ int rc;
+ printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
+ dev->node->full_name);
+
+ rc = fsl_rio_setup(dev);
+ if (rc)
+ goto out;
+
+ /* Enumerate all registered ports */
+ rc = rio_init_mports();
+out:
+ return rc;
+};
+
+static const struct of_device_id fsl_of_rio_rpn_ids[] = {
+ {
+ .compatible = "fsl,rapidio-delta",
+ },
+ {},
+};
+
+static struct of_platform_driver fsl_of_rio_rpn_driver = {
+ .name = "fsl-of-rio",
+ .match_table = fsl_of_rio_rpn_ids,
+ .probe = fsl_of_rio_rpn_probe,
+};
+
+static __init int fsl_of_rio_rpn_init(void)
+{
+ return of_register_platform_driver(&fsl_of_rio_rpn_driver);
}
+
+subsys_initcall(fsl_of_rio_rpn_init);
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
deleted file mode 100644
index 6d3ff30b1579..000000000000
--- a/arch/powerpc/sysdev/fsl_rio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * MPC85xx RapidIO definitions
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
-#define __PPC_SYSLIB_PPC85XX_RIO_H
-
-#include <linux/init.h>
-
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-
-#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 77f50b63a970..b52659620d50 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -234,6 +234,14 @@ config WINDFARM_PM112
which are the recent dual and quad G5 machines using the
970MP dual-core processor.
+config WINDFARM_PM121
+ tristate "Support for thermal management on PowerMac12,1"
+ depends on WINDFARM && I2C && PMAC_SMU
+ select I2C_POWERMAC
+ help
+ This driver provides thermal control for the PowerMac12,1
+ which is the iMac G5 (iSight).
+
config ANSLCD
tristate "Support for ANS LCD display"
depends on ADB_CUDA && PPC_PMAC
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index 2dfc3f4eaf42..e3132efa17c0 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -42,4 +42,9 @@ obj-$(CONFIG_WINDFARM_PM112) += windfarm_pm112.o windfarm_smu_sat.o \
windfarm_smu_sensors.o \
windfarm_max6690_sensor.o \
windfarm_lm75_sensor.o windfarm_pid.o
+obj-$(CONFIG_WINDFARM_PM121) += windfarm_pm121.o windfarm_smu_sat.o \
+ windfarm_smu_controls.o \
+ windfarm_smu_sensors.o \
+ windfarm_max6690_sensor.o \
+ windfarm_lm75_sensor.o windfarm_pid.o
obj-$(CONFIG_PMAC_RACKMETER) += rack-meter.o
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 7e10c3ab4d50..b92b959fe16e 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -127,6 +127,12 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
*/
if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
lm->sens.name = "hd-temp";
+ else if (!strcmp(loc, "Incoming Air Temp"))
+ lm->sens.name = "incoming-air-temp";
+ else if (!strcmp(loc, "ODD Temp"))
+ lm->sens.name = "optical-drive-temp";
+ else if (!strcmp(loc, "HD Temp"))
+ lm->sens.name = "hard-drive-temp";
else
goto fail;
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index 5f03aab9fb5d..e207a90d6b27 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -77,18 +77,28 @@ static struct wf_sensor_ops wf_max6690_ops = {
.owner = THIS_MODULE,
};
-static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
+static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr,
+ const char *loc)
{
struct wf_6690_sensor *max;
- char *name = "backside-temp";
+ char *name;
max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
if (max == NULL) {
printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: "
- "no memory\n", name);
+ "no memory\n", loc);
return;
}
+ if (!strcmp(loc, "BACKSIDE"))
+ name = "backside-temp";
+ else if (!strcmp(loc, "NB Ambient"))
+ name = "north-bridge-temp";
+ else if (!strcmp(loc, "GPU Ambient"))
+ name = "gpu-temp";
+ else
+ goto fail;
+
max->sens.ops = &wf_max6690_ops;
max->sens.name = name;
max->i2c.addr = addr >> 1;
@@ -138,9 +148,7 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
if (loc == NULL || addr == 0)
continue;
printk("found max6690, loc=%s addr=0x%02x\n", loc, addr);
- if (strcmp(loc, "BACKSIDE"))
- continue;
- wf_max6690_create(adapter, addr);
+ wf_max6690_create(adapter, addr, loc);
}
return 0;
diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c
new file mode 100644
index 000000000000..66ec4fb115bb
--- /dev/null
+++ b/drivers/macintosh/windfarm_pm121.c
@@ -0,0 +1,1040 @@
+/*
+ * Windfarm PowerMac thermal control. iMac G5 iSight
+ *
+ * (c) Copyright 2007 Étienne Bersac <bersace@gmail.com>
+ *
+ * Bits & pieces from windfarm_pm81.c by (c) Copyright 2005 Benjamin
+ * Herrenschmidt, IBM Corp. <benh@kernel.crashing.org>
+ *
+ * Released under the term of the GNU GPL v2.
+ *
+ *
+ *
+ * PowerMac12,1
+ * ============
+ *
+ *
+ * The algorithm used is the PID control algorithm, used the same way
+ * the published Darwin code does, using the same values that are
+ * present in the Darwin 8.10 snapshot property lists (note however
+ * that none of the code has been re-used, it's a complete
+ * re-implementation
+ *
+ * There is two models using PowerMac12,1. Model 2 is iMac G5 iSight
+ * 17" while Model 3 is iMac G5 20". They do have both the same
+ * controls with a tiny difference. The control-ids of hard-drive-fan
+ * and cpu-fan is swapped.
+ *
+ *
+ * Target Correction :
+ *
+ * controls have a target correction calculated as :
+ *
+ * new_min = ((((average_power * slope) >> 16) + offset) >> 16) + min_value
+ * new_value = max(new_value, max(new_min, 0))
+ *
+ * OD Fan control correction.
+ *
+ * # model_id: 2
+ * offset : -19563152
+ * slope : 1956315
+ *
+ * # model_id: 3
+ * offset : -15650652
+ * slope : 1565065
+ *
+ * HD Fan control correction.
+ *
+ * # model_id: 2
+ * offset : -15650652
+ * slope : 1565065
+ *
+ * # model_id: 3
+ * offset : -19563152
+ * slope : 1956315
+ *
+ * CPU Fan control correction.
+ *
+ * # model_id: 2
+ * offset : -25431900
+ * slope : 2543190
+ *
+ * # model_id: 3
+ * offset : -15650652
+ * slope : 1565065
+ *
+ *
+ * Target rubber-banding :
+ *
+ * Some controls have a target correction which depends on another
+ * control value. The correction is computed in the following way :
+ *
+ * new_min = ref_value * slope + offset
+ *
+ * ref_value is the value of the reference control. If new_min is
+ * greater than 0, then we correct the target value using :
+ *
+ * new_target = max (new_target, new_min >> 16)
+ *
+ *
+ * # model_id : 2
+ * control : cpu-fan
+ * ref : optical-drive-fan
+ * offset : -15650652
+ * slope : 1565065
+ *
+ * # model_id : 3
+ * control : optical-drive-fan
+ * ref : hard-drive-fan
+ * offset : -32768000
+ * slope : 65536
+ *
+ *
+ * In order to have the moste efficient correction with those
+ * dependencies, we must trigger HD loop before OD loop before CPU
+ * loop.
+ *
+ *
+ * The various control loops found in Darwin config file are:
+ *
+ * HD Fan control loop.
+ *
+ * # model_id: 2
+ * control : hard-drive-fan
+ * sensor : hard-drive-temp
+ * PID params : G_d = 0x00000000
+ * G_p = 0x002D70A3
+ * G_r = 0x00019999
+ * History = 2 entries
+ * Input target = 0x370000
+ * Interval = 5s
+ *
+ * # model_id: 3
+ * control : hard-drive-fan
+ * sensor : hard-drive-temp
+ * PID params : G_d = 0x00000000
+ * G_p = 0x002170A3
+ * G_r = 0x00019999
+ * History = 2 entries
+ * Input target = 0x370000
+ * Interval = 5s
+ *
+ * OD Fan control loop.
+ *
+ * # model_id: 2
+ * control : optical-drive-fan
+ * sensor : optical-drive-temp
+ * PID params : G_d = 0x00000000
+ * G_p = 0x001FAE14
+ * G_r = 0x00019999
+ * History = 2 entries
+ * Input target = 0x320000
+ * Interval = 5s
+ *
+ * # model_id: 3
+ * control : optical-drive-fan
+ * sensor : optical-drive-temp
+ * PID params : G_d = 0x00000000
+ * G_p = 0x001FAE14
+ * G_r = 0x00019999
+ * History = 2 entries
+ * Input target = 0x320000
+ * Interval = 5s
+ *
+ * GPU Fan control loop.
+ *
+ * # model_id: 2
+ * control : hard-drive-fan
+ * sensor : gpu-temp
+ * PID params : G_d = 0x00000000
+ * G_p = 0x002A6666
+ * G_r = 0x00019999
+ * History = 2 entries
+ * Input target = 0x5A0000
+ * Interval = 5s
+ *
+ * # model_id: 3
+ * control : cpu-fan
+ * sensor : gpu-temp
+ * PID params : G_d = 0x00000000
+ * G_p = 0x0010CCCC
+ * G_r = 0x00019999
+ * History = 2 entries
+ * Input target = 0x500000
+ * Interval = 5s
+ *
+ * KODIAK (aka northbridge) Fan control loop.
+ *
+ * # model_id: 2
+ * control : optical-drive-fan
+ * sensor : north-bridge-temp
+ * PID params : G_d = 0x00000000
+ * G_p = 0x003BD70A
+ * G_r = 0x00019999
+ * History = 2 entries
+ * Input target = 0x550000
+ * Interval = 5s
+ *
+ * # model_id: 3
+ * control : hard-drive-fan
+ * sensor : north-bridge-temp
+ * PID params : G_d = 0x00000000
+ * G_p = 0x0030F5C2
+ * G_r = 0x00019999
+ * History = 2 entries
+ * Input target = 0x550000
+ * Interval = 5s
+ *
+ * CPU Fan control loop.
+ *
+ * control : cpu-fan
+ * sensors : cpu-temp, cpu-power
+ * PID params : from SDB partition
+ *
+ *
+ * CPU Slew control loop.
+ *
+ * control : cpufreq-clamp
+ * sensor : cpu-temp
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/kmod.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/sections.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+#include "windfarm_pid.h"
+
+#define VERSION "0.3"
+
+static int pm121_mach_model; /* machine model id */
+
+/* Controls & sensors */
+static struct wf_sensor *sensor_cpu_power;
+static struct wf_sensor *sensor_cpu_temp;
+static struct wf_sensor *sensor_cpu_voltage;
+static struct wf_sensor *sensor_cpu_current;
+static struct wf_sensor *sensor_gpu_temp;
+static struct wf_sensor *sensor_north_bridge_temp;
+static struct wf_sensor *sensor_hard_drive_temp;
+static struct wf_sensor *sensor_optical_drive_temp;
+static struct wf_sensor *sensor_incoming_air_temp; /* unused ! */
+
+enum {
+ FAN_CPU,
+ FAN_HD,
+ FAN_OD,
+ CPUFREQ,
+ N_CONTROLS
+};
+static struct wf_control *controls[N_CONTROLS] = {};
+
+/* Set to kick the control loop into life */
+static int pm121_all_controls_ok, pm121_all_sensors_ok, pm121_started;
+
+enum {
+ FAILURE_FAN = 1 << 0,
+ FAILURE_SENSOR = 1 << 1,
+ FAILURE_OVERTEMP = 1 << 2
+};
+
+/* All sys loops. Note the HD before the OD loop in order to have it
+ run before. */
+enum {
+ LOOP_GPU, /* control = hd or cpu, but luckily,
+ it doesn't matter */
+ LOOP_HD, /* control = hd */
+ LOOP_KODIAK, /* control = hd or od */
+ LOOP_OD, /* control = od */
+ N_LOOPS
+};
+
+static const char *loop_names[N_LOOPS] = {
+ "GPU",
+ "HD",
+ "KODIAK",
+ "OD",
+};
+
+#define PM121_NUM_CONFIGS 2
+
+static unsigned int pm121_failure_state;
+static int pm121_readjust, pm121_skipping;
+static s32 average_power;
+
+struct pm121_correction {
+ int offset;
+ int slope;
+};
+
+static struct pm121_correction corrections[N_CONTROLS][PM121_NUM_CONFIGS] = {
+ /* FAN_OD */
+ {
+ /* MODEL 2 */
+ { .offset = -19563152,
+ .slope = 1956315
+ },
+ /* MODEL 3 */
+ { .offset = -15650652,
+ .slope = 1565065
+ },
+ },
+ /* FAN_HD */
+ {
+ /* MODEL 2 */
+ { .offset = -15650652,
+ .slope = 1565065
+ },
+ /* MODEL 3 */
+ { .offset = -19563152,
+ .slope = 1956315
+ },
+ },
+ /* FAN_CPU */
+ {
+ /* MODEL 2 */
+ { .offset = -25431900,
+ .slope = 2543190
+ },
+ /* MODEL 3 */
+ { .offset = -15650652,
+ .slope = 1565065
+ },
+ },
+ /* CPUFREQ has no correction (and is not implemented at all) */
+};
+
+struct pm121_connection {
+ unsigned int control_id;
+ unsigned int ref_id;
+ struct pm121_correction correction;
+};
+
+static struct pm121_connection pm121_connections[] = {
+ /* MODEL 2 */
+ { .control_id = FAN_CPU,
+ .ref_id = FAN_OD,
+ { .offset = -32768000,
+ .slope = 65536
+ }
+ },
+ /* MODEL 3 */
+ { .control_id = FAN_OD,
+ .ref_id = FAN_HD,
+ { .offset = -32768000,
+ .slope = 65536
+ }
+ },
+};
+
+/* pointer to the current model connection */
+static struct pm121_connection *pm121_connection;
+
+/*
+ * ****** System Fans Control Loop ******
+ *
+ */
+
+/* Since each loop handles only one control and we want to avoid
+ * writing virtual control, we store the control correction with the
+ * loop params. Some data are not set, there are common to all loop
+ * and thus, hardcoded.
+ */
+struct pm121_sys_param {
+ /* purely informative since we use mach_model-2 as index */
+ int model_id;
+ struct wf_sensor **sensor; /* use sensor_id instead ? */
+ s32 gp, itarget;
+ unsigned int control_id;
+};
+
+static struct pm121_sys_param
+pm121_sys_all_params[N_LOOPS][PM121_NUM_CONFIGS] = {
+ /* GPU Fan control loop */
+ {
+ { .model_id = 2,
+ .sensor = &sensor_gpu_temp,
+ .gp = 0x002A6666,
+ .itarget = 0x5A0000,
+ .control_id = FAN_HD,
+ },
+ { .model_id = 3,
+ .sensor = &sensor_gpu_temp,
+ .gp = 0x0010CCCC,
+ .itarget = 0x500000,
+ .control_id = FAN_CPU,
+ },
+ },
+ /* HD Fan control loop */
+ {
+ { .model_id = 2,
+ .sensor = &sensor_hard_drive_temp,
+ .gp = 0x002D70A3,
+ .itarget = 0x370000,
+ .control_id = FAN_HD,
+ },
+ { .model_id = 3,
+ .sensor = &sensor_hard_drive_temp,
+ .gp = 0x002170A3,
+ .itarget = 0x370000,
+ .control_id = FAN_HD,
+ },
+ },
+ /* KODIAK Fan control loop */
+ {
+ { .model_id = 2,
+ .sensor = &sensor_north_bridge_temp,
+ .gp = 0x003BD70A,
+ .itarget = 0x550000,
+ .control_id = FAN_OD,
+ },
+ { .model_id = 3,
+ .sensor = &sensor_north_bridge_temp,
+ .gp = 0x0030F5C2,
+ .itarget = 0x550000,
+ .control_id = FAN_HD,
+ },
+ },
+ /* OD Fan control loop */
+ {
+ { .model_id = 2,
+ .sensor = &sensor_optical_drive_temp,
+ .gp = 0x001FAE14,
+ .itarget = 0x320000,
+ .control_id = FAN_OD,
+ },
+ { .model_id = 3,
+ .sensor = &sensor_optical_drive_temp,
+ .gp = 0x001FAE14,
+ .itarget = 0x320000,
+ .control_id = FAN_OD,
+ },
+ },
+};
+
+/* the hardcoded values */
+#define PM121_SYS_GD 0x00000000
+#define PM121_SYS_GR 0x00019999
+#define PM121_SYS_HISTORY_SIZE 2
+#define PM121_SYS_INTERVAL 5
+
+/* State data used by the system fans control loop
+ */
+struct pm121_sys_state {
+ int ticks;
+ s32 setpoint;
+ struct wf_pid_state pid;
+};
+
+struct pm121_sys_state *pm121_sys_state[N_LOOPS] = {};
+
+/*
+ * ****** CPU Fans Control Loop ******
+ *
+ */
+
+#define PM121_CPU_INTERVAL 1
+
+/* State data used by the cpu fans control loop
+ */
+struct pm121_cpu_state {
+ int ticks;
+ s32 setpoint;
+ struct wf_cpu_pid_state pid;
+};
+
+static struct pm121_cpu_state *pm121_cpu_state;
+
+
+
+/*
+ * ***** Implementation *****
+ *
+ */
+
+/* correction the value using the output-low-bound correction algo */
+static s32 pm121_correct(s32 new_setpoint,
+ unsigned int control_id,
+ s32 min)
+{
+ s32 new_min;
+ struct pm121_correction *correction;
+ correction = &corrections[control_id][pm121_mach_model - 2];
+
+ new_min = (average_power * correction->slope) >> 16;
+ new_min += correction->offset;
+ new_min = (new_min >> 16) + min;
+
+ return max(new_setpoint, max(new_min, 0));
+}
+
+static s32 pm121_connect(unsigned int control_id, s32 setpoint)
+{
+ s32 new_min, value, new_setpoint;
+
+ if (pm121_connection->control_id == control_id) {
+ controls[control_id]->ops->get_value(controls[control_id],
+ &value);
+ new_min = value * pm121_connection->correction.slope;
+ new_min += pm121_connection->correction.offset;
+ if (new_min > 0) {
+ new_setpoint = max(setpoint, (new_min >> 16));
+ if (new_setpoint != setpoint) {
+ pr_debug("pm121: %s depending on %s, "
+ "corrected from %d to %d RPM\n",
+ controls[control_id]->name,
+ controls[pm121_connection->ref_id]->name,
+ (int) setpoint, (int) new_setpoint);
+ }
+ } else
+ new_setpoint = setpoint;
+ }
+ /* no connection */
+ else
+ new_setpoint = setpoint;
+
+ return new_setpoint;
+}
+
+/* FAN LOOPS */
+static void pm121_create_sys_fans(int loop_id)
+{
+ struct pm121_sys_param *param = NULL;
+ struct wf_pid_param pid_param;
+ struct wf_control *control = NULL;
+ int i;
+
+ /* First, locate the params for this model */
+ for (i = 0; i < PM121_NUM_CONFIGS; i++) {
+ if (pm121_sys_all_params[loop_id][i].model_id == pm121_mach_model) {
+ param = &(pm121_sys_all_params[loop_id][i]);
+ break;
+ }
+ }
+
+ /* No params found, put fans to max */
+ if (param == NULL) {
+ printk(KERN_WARNING "pm121: %s fan config not found "
+ " for this machine model\n",
+ loop_names[loop_id]);
+ goto fail;
+ }
+
+ control = controls[param->control_id];
+
+ /* Alloc & initialize state */
+ pm121_sys_state[loop_id] = kmalloc(sizeof(struct pm121_sys_state),
+ GFP_KERNEL);
+ if (pm121_sys_state[loop_id] == NULL) {
+ printk(KERN_WARNING "pm121: Memory allocation error\n");
+ goto fail;
+ }
+ pm121_sys_state[loop_id]->ticks = 1;
+
+ /* Fill PID params */
+ pid_param.gd = PM121_SYS_GD;
+ pid_param.gp = param->gp;
+ pid_param.gr = PM121_SYS_GR;
+ pid_param.interval = PM121_SYS_INTERVAL;
+ pid_param.history_len = PM121_SYS_HISTORY_SIZE;
+ pid_param.itarget = param->itarget;
+ pid_param.min = control->ops->get_min(control);
+ pid_param.max = control->ops->get_max(control);
+
+ wf_pid_init(&pm121_sys_state[loop_id]->pid, &pid_param);
+
+ pr_debug("pm121: %s Fan control loop initialized.\n"
+ " itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
+ loop_names[loop_id], FIX32TOPRINT(pid_param.itarget),
+ pid_param.min, pid_param.max);
+ return;
+
+ fail:
+ /* note that this is not optimal since another loop may still
+ control the same control */
+ printk(KERN_WARNING "pm121: failed to set up %s loop "
+ "setting \"%s\" to max speed.\n",
+ loop_names[loop_id], control->name);
+
+ if (control)
+ wf_control_set_max(control);
+}
+
+static void pm121_sys_fans_tick(int loop_id)
+{
+ struct pm121_sys_param *param;
+ struct pm121_sys_state *st;
+ struct wf_sensor *sensor;
+ struct wf_control *control;
+ s32 temp, new_setpoint;
+ int rc;
+
+ param = &(pm121_sys_all_params[loop_id][pm121_mach_model-2]);
+ st = pm121_sys_state[loop_id];
+ sensor = *(param->sensor);
+ control = controls[param->control_id];
+
+ if (--st->ticks != 0) {
+ if (pm121_readjust)
+ goto readjust;
+ return;
+ }
+ st->ticks = PM121_SYS_INTERVAL;
+
+ rc = sensor->ops->get_value(sensor, &temp);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: %s sensor error %d\n",
+ sensor->name, rc);
+ pm121_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ pr_debug("pm121: %s Fan tick ! %s: %d.%03d\n",
+ loop_names[loop_id], sensor->name,
+ FIX32TOPRINT(temp));
+
+ new_setpoint = wf_pid_run(&st->pid, temp);
+
+ /* correction */
+ new_setpoint = pm121_correct(new_setpoint,
+ param->control_id,
+ st->pid.param.min);
+ /* linked corretion */
+ new_setpoint = pm121_connect(param->control_id, new_setpoint);
+
+ if (new_setpoint == st->setpoint)
+ return;
+ st->setpoint = new_setpoint;
+ pr_debug("pm121: %s corrected setpoint: %d RPM\n",
+ control->name, (int)new_setpoint);
+ readjust:
+ if (control && pm121_failure_state == 0) {
+ rc = control->ops->set_value(control, st->setpoint);
+ if (rc) {
+ printk(KERN_WARNING "windfarm: %s fan error %d\n",
+ control->name, rc);
+ pm121_failure_state |= FAILURE_FAN;
+ }
+ }
+}
+
+
+/* CPU LOOP */
+static void pm121_create_cpu_fans(void)
+{
+ struct wf_cpu_pid_param pid_param;
+ const struct smu_sdbp_header *hdr;
+ struct smu_sdbp_cpupiddata *piddata;
+ struct smu_sdbp_fvt *fvt;
+ struct wf_control *fan_cpu;
+ s32 tmax, tdelta, maxpow, powadj;
+
+ fan_cpu = controls[FAN_CPU];
+
+ /* First, locate the PID params in SMU SBD */
+ hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL);
+ if (hdr == 0) {
+ printk(KERN_WARNING "pm121: CPU PID fan config not found.\n");
+ goto fail;
+ }
+ piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
+
+ /* Get the FVT params for operating point 0 (the only supported one
+ * for now) in order to get tmax
+ */
+ hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
+ if (hdr) {
+ fvt = (struct smu_sdbp_fvt *)&hdr[1];
+ tmax = ((s32)fvt->maxtemp) << 16;
+ } else
+ tmax = 0x5e0000; /* 94 degree default */
+
+ /* Alloc & initialize state */
+ pm121_cpu_state = kmalloc(sizeof(struct pm121_cpu_state),
+ GFP_KERNEL);
+ if (pm121_cpu_state == NULL)
+ goto fail;
+ pm121_cpu_state->ticks = 1;
+
+ /* Fill PID params */
+ pid_param.interval = PM121_CPU_INTERVAL;
+ pid_param.history_len = piddata->history_len;
+ if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) {
+ printk(KERN_WARNING "pm121: History size overflow on "
+ "CPU control loop (%d)\n", piddata->history_len);
+ pid_param.history_len = WF_CPU_PID_MAX_HISTORY;
+ }
+ pid_param.gd = piddata->gd;
+ pid_param.gp = piddata->gp;
+ pid_param.gr = piddata->gr / pid_param.history_len;
+
+ tdelta = ((s32)piddata->target_temp_delta) << 16;
+ maxpow = ((s32)piddata->max_power) << 16;
+ powadj = ((s32)piddata->power_adj) << 16;
+
+ pid_param.tmax = tmax;
+ pid_param.ttarget = tmax - tdelta;
+ pid_param.pmaxadj = maxpow - powadj;
+
+ pid_param.min = fan_cpu->ops->get_min(fan_cpu);
+ pid_param.max = fan_cpu->ops->get_max(fan_cpu);
+
+ wf_cpu_pid_init(&pm121_cpu_state->pid, &pid_param);
+
+ pr_debug("pm121: CPU Fan control initialized.\n");
+ pr_debug(" ttarged=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM,\n",
+ FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax),
+ pid_param.min, pid_param.max);
+
+ return;
+
+ fail:
+ printk(KERN_WARNING "pm121: CPU fan config not found, max fan speed\n");
+
+ if (controls[CPUFREQ])
+ wf_control_set_max(controls[CPUFREQ]);
+ if (fan_cpu)
+ wf_control_set_max(fan_cpu);
+}
+
+
+static void pm121_cpu_fans_tick(struct pm121_cpu_state *st)
+{
+ s32 new_setpoint, temp, power;
+ struct wf_control *fan_cpu = NULL;
+ int rc;
+
+ if (--st->ticks != 0) {
+ if (pm121_readjust)
+ goto readjust;
+ return;
+ }
+ st->ticks = PM121_CPU_INTERVAL;
+
+ fan_cpu = controls[FAN_CPU];
+
+ rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);
+ if (rc) {
+ printk(KERN_WARNING "pm121: CPU temp sensor error %d\n",
+ rc);
+ pm121_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);
+ if (rc) {
+ printk(KERN_WARNING "pm121: CPU power sensor error %d\n",
+ rc);
+ pm121_failure_state |= FAILURE_SENSOR;
+ return;
+ }
+
+ pr_debug("pm121: CPU Fans tick ! CPU temp: %d.%03d°C, power: %d.%03d\n",
+ FIX32TOPRINT(temp), FIX32TOPRINT(power));
+
+ if (temp > st->pid.param.tmax)
+ pm121_failure_state |= FAILURE_OVERTEMP;
+
+ new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);
+
+ /* correction */
+ new_setpoint = pm121_correct(new_setpoint,
+ FAN_CPU,
+ st->pid.param.min);
+
+ /* connected correction */
+ new_setpoint = pm121_connect(FAN_CPU, new_setpoint);
+
+ if (st->setpoint == new_setpoint)
+ return;
+ st->setpoint = new_setpoint;
+ pr_debug("pm121: CPU corrected setpoint: %d RPM\n", (int)new_setpoint);
+
+ readjust:
+ if (fan_cpu && pm121_failure_state == 0) {
+ rc = fan_cpu->ops->set_value(fan_cpu, st->setpoint);
+ if (rc) {
+ printk(KERN_WARNING "pm121: %s fan error %d\n",
+ fan_cpu->name, rc);
+ pm121_failure_state |= FAILURE_FAN;
+ }
+ }
+}
+
+/*
+ * ****** Common ******
+ *
+ */
+
+static void pm121_tick(void)
+{
+ unsigned int last_failure = pm121_failure_state;
+ unsigned int new_failure;
+ s32 total_power;
+ int i;
+
+ if (!pm121_started) {
+ pr_debug("pm121: creating control loops !\n");
+ for (i = 0; i < N_LOOPS; i++)
+ pm121_create_sys_fans(i);
+
+ pm121_create_cpu_fans();
+ pm121_started = 1;
+ }
+
+ /* skipping ticks */
+ if (pm121_skipping && --pm121_skipping)
+ return;
+
+ /* compute average power */
+ total_power = 0;
+ for (i = 0; i < pm121_cpu_state->pid.param.history_len; i++)
+ total_power += pm121_cpu_state->pid.powers[i];
+
+ average_power = total_power / pm121_cpu_state->pid.param.history_len;
+
+
+ pm121_failure_state = 0;
+ for (i = 0 ; i < N_LOOPS; i++) {
+ if (pm121_sys_state[i])
+ pm121_sys_fans_tick(i);
+ }
+
+ if (pm121_cpu_state)
+ pm121_cpu_fans_tick(pm121_cpu_state);
+
+ pm121_readjust = 0;
+ new_failure = pm121_failure_state & ~last_failure;
+
+ /* If entering failure mode, clamp cpufreq and ramp all
+ * fans to full speed.
+ */
+ if (pm121_failure_state && !last_failure) {
+ for (i = 0; i < N_CONTROLS; i++) {
+ if (controls[i])
+ wf_control_set_max(controls[i]);
+ }
+ }
+
+ /* If leaving failure mode, unclamp cpufreq and readjust
+ * all fans on next iteration
+ */
+ if (!pm121_failure_state && last_failure) {
+ if (controls[CPUFREQ])
+ wf_control_set_min(controls[CPUFREQ]);
+ pm121_readjust = 1;
+ }
+
+ /* Overtemp condition detected, notify and start skipping a couple
+ * ticks to let the temperature go down
+ */
+ if (new_failure & FAILURE_OVERTEMP) {
+ wf_set_overtemp();
+ pm121_skipping = 2;
+ }
+
+ /* We only clear the overtemp condition if overtemp is cleared
+ * _and_ no other failure is present. Since a sensor error will
+ * clear the overtemp condition (can't measure temperature) at
+ * the control loop levels, but we don't want to keep it clear
+ * here in this case
+ */
+ if (new_failure == 0 && last_failure & FAILURE_OVERTEMP)
+ wf_clear_overtemp();
+}
+
+
+static struct wf_control* pm121_register_control(struct wf_control *ct,
+ const char *match,
+ unsigned int id)
+{
+ if (controls[id] == NULL && !strcmp(ct->name, match)) {
+ if (wf_get_control(ct) == 0)
+ controls[id] = ct;
+ }
+ return controls[id];
+}
+
+static void pm121_new_control(struct wf_control *ct)
+{
+ int all = 1;
+
+ if (pm121_all_controls_ok)
+ return;
+
+ all = pm121_register_control(ct, "optical-drive-fan", FAN_OD) && all;
+ all = pm121_register_control(ct, "hard-drive-fan", FAN_HD) && all;
+ all = pm121_register_control(ct, "cpu-fan", FAN_CPU) && all;
+ all = pm121_register_control(ct, "cpufreq-clamp", CPUFREQ) && all;
+
+ if (all)
+ pm121_all_controls_ok = 1;
+}
+
+
+
+
+static struct wf_sensor* pm121_register_sensor(struct wf_sensor *sensor,
+ const char *match,
+ struct wf_sensor **var)
+{
+ if (*var == NULL && !strcmp(sensor->name, match)) {
+ if (wf_get_sensor(sensor) == 0)
+ *var = sensor;
+ }
+ return *var;
+}
+
+static void pm121_new_sensor(struct wf_sensor *sr)
+{
+ int all = 1;
+
+ if (pm121_all_sensors_ok)
+ return;
+
+ all = pm121_register_sensor(sr, "cpu-temp",
+ &sensor_cpu_temp) && all;
+ all = pm121_register_sensor(sr, "cpu-current",
+ &sensor_cpu_current) && all;
+ all = pm121_register_sensor(sr, "cpu-voltage",
+ &sensor_cpu_voltage) && all;
+ all = pm121_register_sensor(sr, "cpu-power",
+ &sensor_cpu_power) && all;
+ all = pm121_register_sensor(sr, "hard-drive-temp",
+ &sensor_hard_drive_temp) && all;
+ all = pm121_register_sensor(sr, "optical-drive-temp",
+ &sensor_optical_drive_temp) && all;
+ all = pm121_register_sensor(sr, "incoming-air-temp",
+ &sensor_incoming_air_temp) && all;
+ all = pm121_register_sensor(sr, "north-bridge-temp",
+ &sensor_north_bridge_temp) && all;
+ all = pm121_register_sensor(sr, "gpu-temp",
+ &sensor_gpu_temp) && all;
+
+ if (all)
+ pm121_all_sensors_ok = 1;
+}
+
+
+
+static int pm121_notify(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ switch (event) {
+ case WF_EVENT_NEW_CONTROL:
+ pr_debug("pm121: new control %s detected\n",
+ ((struct wf_control *)data)->name);
+ pm121_new_control(data);
+ break;
+ case WF_EVENT_NEW_SENSOR:
+ pr_debug("pm121: new sensor %s detected\n",
+ ((struct wf_sensor *)data)->name);
+ pm121_new_sensor(data);
+ break;
+ case WF_EVENT_TICK:
+ if (pm121_all_controls_ok && pm121_all_sensors_ok)
+ pm121_tick();
+ break;
+ }
+
+ return 0;
+}
+
+static struct notifier_block pm121_events = {
+ .notifier_call = pm121_notify,
+};
+
+static int pm121_init_pm(void)
+{
+ const struct smu_sdbp_header *hdr;
+
+ hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL);
+ if (hdr != 0) {
+ struct smu_sdbp_sensortree *st =
+ (struct smu_sdbp_sensortree *)&hdr[1];
+ pm121_mach_model = st->model_id;
+ }
+
+ pm121_connection = &pm121_connections[pm121_mach_model - 2];
+
+ printk(KERN_INFO "pm121: Initializing for iMac G5 iSight model ID %d\n",
+ pm121_mach_model);
+
+ return 0;
+}
+
+
+static int pm121_probe(struct platform_device *ddev)
+{
+ wf_register_client(&pm121_events);
+
+ return 0;
+}
+
+static int __devexit pm121_remove(struct platform_device *ddev)
+{
+ wf_unregister_client(&pm121_events);
+ return 0;
+}
+
+static struct platform_driver pm121_driver = {
+ .probe = pm121_probe,
+ .remove = __devexit_p(pm121_remove),
+ .driver = {
+ .name = "windfarm",
+ .bus = &platform_bus_type,
+ },
+};
+
+
+static int __init pm121_init(void)
+{
+ int rc = -ENODEV;
+
+ if (machine_is_compatible("PowerMac12,1"))
+ rc = pm121_init_pm();
+
+ if (rc == 0) {
+ request_module("windfarm_smu_controls");
+ request_module("windfarm_smu_sensors");
+ request_module("windfarm_smu_sat");
+ request_module("windfarm_lm75_sensor");
+ request_module("windfarm_max6690_sensor");
+ request_module("windfarm_cpufreq_clamp");
+ platform_driver_register(&pm121_driver);
+ }
+
+ return rc;
+}
+
+static void __exit pm121_exit(void)
+{
+
+ platform_driver_unregister(&pm121_driver);
+}
+
+
+module_init(pm121_init);
+module_exit(pm121_exit);
+
+MODULE_AUTHOR("Étienne Bersac <bersace@gmail.com>");
+MODULE_DESCRIPTION("Thermal control logic for iMac G5 (iSight)");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 58c2590f05ec..961fa0e7c2cf 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -218,6 +218,10 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node,
fct->ctrl.name = "cpu-fan";
else if (!strcmp(l, "Hard Drive") || !strcmp(l, "Hard drive"))
fct->ctrl.name = "drive-bay-fan";
+ else if (!strcmp(l, "HDD Fan")) /* seen on iMac G5 iSight */
+ fct->ctrl.name = "hard-drive-fan";
+ else if (!strcmp(l, "ODD Fan")) /* same */
+ fct->ctrl.name = "optical-drive-fan";
/* Unrecognized fan, bail out */
if (fct->ctrl.name == NULL)
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index e7fd08adbbac..2b8fd68bc516 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -77,7 +77,7 @@ static int rionet_capable = 1;
* could be made into a hash table to save memory depending
* on system trade-offs.
*/
-static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES];
+static struct rio_dev **rionet_active;
#define is_rionet_capable(pef, src_ops, dst_ops) \
((pef & RIO_PEF_INB_MBOX) && \
@@ -195,7 +195,8 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
}
if (eth->h_dest[0] & 0x01) {
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++)
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rnet->mport->sys_size);
+ i++)
if (rionet_active[i])
rionet_queue_tx_msg(skb, ndev,
rionet_active[i]);
@@ -385,6 +386,8 @@ static void rionet_remove(struct rio_dev *rdev)
struct net_device *ndev = NULL;
struct rionet_peer *peer, *tmp;
+ free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
+ __ilog2(sizeof(void *)) + 4 : 0);
unregister_netdev(ndev);
kfree(ndev);
@@ -443,6 +446,15 @@ static int rionet_setup_netdev(struct rio_mport *mport)
goto out;
}
+ rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
+ mport->sys_size ? __ilog2(sizeof(void *)) + 4 : 0);
+ if (!rionet_active) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ memset((void *)rionet_active, 0, sizeof(void *) *
+ RIO_MAX_ROUTE_ENTRIES(mport->sys_size));
+
/* Set up private area */
rnet = (struct rionet_private *)ndev->priv;
rnet->mport = mport;
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 4142115d298e..c32822ad84a4 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -1,14 +1,6 @@
#
# RapidIO configuration
#
-config RAPIDIO_8_BIT_TRANSPORT
- bool "8-bit transport addressing"
- depends on RAPIDIO
- ---help---
- By default, the kernel assumes a 16-bit addressed RapidIO
- network. By selecting this option, the kernel will support
- an 8-bit addressed network.
-
config RAPIDIO_DISC_TIMEOUT
int "Discovery timeout duration (seconds)"
depends on RAPIDIO
diff --git a/drivers/rapidio/rio-access.c b/drivers/rapidio/rio-access.c
index 8b56bbdd011e..a3824baca2e5 100644
--- a/drivers/rapidio/rio-access.c
+++ b/drivers/rapidio/rio-access.c
@@ -48,7 +48,7 @@ int __rio_local_read_config_##size \
u32 data = 0; \
if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
spin_lock_irqsave(&rio_config_lock, flags); \
- res = mport->ops->lcread(mport->id, offset, len, &data); \
+ res = mport->ops->lcread(mport, mport->id, offset, len, &data); \
*value = (type)data; \
spin_unlock_irqrestore(&rio_config_lock, flags); \
return res; \
@@ -71,7 +71,7 @@ int __rio_local_write_config_##size \
unsigned long flags; \
if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
spin_lock_irqsave(&rio_config_lock, flags); \
- res = mport->ops->lcwrite(mport->id, offset, len, value); \
+ res = mport->ops->lcwrite(mport, mport->id, offset, len, value);\
spin_unlock_irqrestore(&rio_config_lock, flags); \
return res; \
}
@@ -108,7 +108,7 @@ int rio_mport_read_config_##size \
u32 data = 0; \
if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
spin_lock_irqsave(&rio_config_lock, flags); \
- res = mport->ops->cread(mport->id, destid, hopcount, offset, len, &data); \
+ res = mport->ops->cread(mport, mport->id, destid, hopcount, offset, len, &data); \
*value = (type)data; \
spin_unlock_irqrestore(&rio_config_lock, flags); \
return res; \
@@ -131,7 +131,7 @@ int rio_mport_write_config_##size \
unsigned long flags; \
if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
spin_lock_irqsave(&rio_config_lock, flags); \
- res = mport->ops->cwrite(mport->id, destid, hopcount, offset, len, value); \
+ res = mport->ops->cwrite(mport, mport->id, destid, hopcount, offset, len, value); \
spin_unlock_irqrestore(&rio_config_lock, flags); \
return res; \
}
@@ -166,7 +166,7 @@ int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data)
unsigned long flags;
spin_lock_irqsave(&rio_doorbell_lock, flags);
- res = mport->ops->dsend(mport->id, destid, data);
+ res = mport->ops->dsend(mport, mport->id, destid, data);
spin_unlock_irqrestore(&rio_doorbell_lock, flags);
return res;
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 44420723a359..a926c896475e 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -73,7 +73,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
- return RIO_GET_DID(result);
+ return RIO_GET_DID(port->sys_size, result);
}
/**
@@ -88,7 +88,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
{
rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
- RIO_SET_DID(did));
+ RIO_SET_DID(port->sys_size, did));
}
/**
@@ -100,7 +100,8 @@ static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u
*/
static void rio_local_set_device_id(struct rio_mport *port, u16 did)
{
- rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(did));
+ rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size,
+ did));
}
/**
@@ -350,8 +351,18 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rswitch->switchid = next_switchid;
rswitch->hopcount = hopcount;
rswitch->destid = destid;
+ rswitch->route_table = kzalloc(sizeof(u8)*
+ RIO_MAX_ROUTE_ENTRIES(port->sys_size),
+ GFP_KERNEL);
+ if (!rswitch->route_table) {
+ kfree(rdev);
+ rdev = NULL;
+ kfree(rswitch);
+ goto out;
+ }
/* Initialize switch route table */
- for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES; rdid++)
+ for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
+ rdid++)
rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
rdev->rswitch = rswitch;
sprintf(rio_name(rdev), "%02x:s:%04x", rdev->net->id,
@@ -480,7 +491,7 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
{
u32 result;
- rio_mport_read_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
RIO_HOST_DID_LOCK_CSR, &result);
return (u16) (result & 0xffff);
@@ -571,14 +582,16 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
/* Attempt to acquire device lock */
- rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount,
RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
< port->host_deviceid) {
/* Delay a bit */
mdelay(1);
/* Attempt to acquire device lock again */
- rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
+ rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount,
RIO_HOST_DID_LOCK_CSR,
port->host_deviceid);
}
@@ -590,7 +603,9 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
/* Setup new RIO device */
- if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID, hopcount, 1))) {
+ rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
+ hopcount, 1);
+ if (rdev) {
/* Add device to the global and bus/net specific list. */
list_add_tail(&rdev->net_list, &net->devices);
} else
@@ -598,7 +613,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
if (rio_is_switch(rdev)) {
next_switchid++;
- sw_inport = rio_get_swpinfo_inport(port, RIO_ANY_DESTID, hopcount);
+ sw_inport = rio_get_swpinfo_inport(port,
+ RIO_ANY_DESTID(port->sys_size), hopcount);
rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
port->host_deviceid, sw_inport);
rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -612,7 +628,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
num_ports =
- rio_get_swpinfo_tports(port, RIO_ANY_DESTID, hopcount);
+ rio_get_swpinfo_tports(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount);
pr_debug(
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
rio_name(rdev), rdev->vid, rdev->did, num_ports);
@@ -624,13 +641,15 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
cur_destid = next_destid;
if (rio_sport_is_active
- (port, RIO_ANY_DESTID, hopcount, port_num)) {
+ (port, RIO_ANY_DESTID(port->sys_size), hopcount,
+ port_num)) {
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
rio_route_add_entry(port, rdev->rswitch,
- RIO_GLOBAL_TABLE,
- RIO_ANY_DESTID, port_num);
+ RIO_GLOBAL_TABLE,
+ RIO_ANY_DESTID(port->sys_size),
+ port_num);
if (rio_enum_peer(net, port, hopcount + 1) < 0)
return -1;
@@ -735,7 +754,8 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
- for (ndestid = 0; ndestid < RIO_ANY_DESTID;
+ for (ndestid = 0;
+ ndestid < RIO_ANY_DESTID(port->sys_size);
ndestid++) {
rio_route_get_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
@@ -917,7 +937,9 @@ static void rio_build_route_tables(void)
list_for_each_entry(rdev, &rio_devices, global_list)
if (rio_is_switch(rdev))
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+ for (i = 0;
+ i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+ i++) {
if (rio_route_get_entry
(rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE,
i, &sport) < 0)
@@ -981,7 +1003,8 @@ int rio_disc_mport(struct rio_mport *mport)
del_timer_sync(&rio_enum_timer);
pr_debug("done\n");
- if (rio_disc_peer(net, mport, RIO_ANY_DESTID, 0) < 0) {
+ if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
+ 0) < 0) {
printk(KERN_INFO
"RIO: master port %d device has failed discovery\n",
mport->id);
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 659e31164cf0..97a147f050d6 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -43,7 +43,8 @@ static ssize_t routes_show(struct device *dev, struct device_attribute *attr, ch
if (!rdev->rswitch)
goto out;
- for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+ i++) {
if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
continue;
str +=
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 80c5f1ba2e49..680661abbc4b 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -43,7 +43,7 @@ u16 rio_local_get_device_id(struct rio_mport *port)
rio_local_read_config_32(port, RIO_DID_CSR, &result);
- return (RIO_GET_DID(result));
+ return (RIO_GET_DID(port->sys_size, result));
}
/**
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 80e3f03b5041..7786d02581f2 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -51,10 +51,5 @@ extern struct rio_route_ops __end_rio_route_ops[];
DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, \
vid, did, add_hook, get_hook)
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_GET_DID(x) ((x & 0x00ff0000) >> 16)
-#define RIO_SET_DID(x) ((x & 0x000000ff) << 16)
-#else
-#define RIO_GET_DID(x) (x & 0xffff)
-#define RIO_SET_DID(x) (x & 0xffff)
-#endif
+#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
+#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h
index fd98ca998b4f..cf83f2d7e2a5 100644
--- a/include/asm-powerpc/processor.h
+++ b/include/asm-powerpc/processor.h
@@ -138,6 +138,8 @@ typedef struct {
struct thread_struct {
unsigned long ksp; /* Kernel stack pointer */
+ unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */
+
#ifdef CONFIG_PPC64
unsigned long ksp_vsid;
#endif
@@ -182,11 +184,14 @@ struct thread_struct {
#define ARCH_MIN_TASKALIGN 16
#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack)
+#define INIT_SP_LIMIT \
+ (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
#ifdef CONFIG_PPC32
#define INIT_THREAD { \
.ksp = INIT_SP, \
+ .ksp_limit = INIT_SP_LIMIT, \
.fs = KERNEL_DS, \
.pgdir = swapper_pg_dir, \
.fpexc_mode = MSR_FE0 | MSR_FE1, \
@@ -194,6 +199,7 @@ struct thread_struct {
#else
#define INIT_THREAD { \
.ksp = INIT_SP, \
+ .ksp_limit = INIT_SP_LIMIT, \
.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
.fs = KERNEL_DS, \
.fpr = {0}, \
diff --git a/include/asm-ppc/rio.h b/include/asm-powerpc/rio.h
index 0018bf80cb25..0018bf80cb25 100644
--- a/include/asm-ppc/rio.h
+++ b/include/asm-powerpc/rio.h
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index fab1674b31b6..2b6559a6d113 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -204,7 +204,7 @@ extern int powersave_nap; /* set if nap mode can be used in idle loop */
* Changes the memory location '*ptr' to be val and returns
* the previous value stored there.
*/
-static __inline__ unsigned long
+static __always_inline unsigned long
__xchg_u32(volatile void *p, unsigned long val)
{
unsigned long prev;
@@ -229,7 +229,7 @@ __xchg_u32(volatile void *p, unsigned long val)
* Changes the memory location '*ptr' to be val and returns
* the previous value stored there.
*/
-static __inline__ unsigned long
+static __always_inline unsigned long
__xchg_u32_local(volatile void *p, unsigned long val)
{
unsigned long prev;
@@ -247,7 +247,7 @@ __xchg_u32_local(volatile void *p, unsigned long val)
}
#ifdef CONFIG_PPC64
-static __inline__ unsigned long
+static __always_inline unsigned long
__xchg_u64(volatile void *p, unsigned long val)
{
unsigned long prev;
@@ -266,7 +266,7 @@ __xchg_u64(volatile void *p, unsigned long val)
return prev;
}
-static __inline__ unsigned long
+static __always_inline unsigned long
__xchg_u64_local(volatile void *p, unsigned long val)
{
unsigned long prev;
@@ -290,7 +290,7 @@ __xchg_u64_local(volatile void *p, unsigned long val)
*/
extern void __xchg_called_with_bad_pointer(void);
-static __inline__ unsigned long
+static __always_inline unsigned long
__xchg(volatile void *ptr, unsigned long x, unsigned int size)
{
switch (size) {
@@ -305,7 +305,7 @@ __xchg(volatile void *ptr, unsigned long x, unsigned int size)
return x;
}
-static __inline__ unsigned long
+static __always_inline unsigned long
__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
{
switch (size) {
@@ -338,7 +338,7 @@ __xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
*/
#define __HAVE_ARCH_CMPXCHG 1
-static __inline__ unsigned long
+static __always_inline unsigned long
__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
{
unsigned int prev;
@@ -361,7 +361,7 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
return prev;
}
-static __inline__ unsigned long
+static __always_inline unsigned long
__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
unsigned long new)
{
@@ -384,7 +384,7 @@ __cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
}
#ifdef CONFIG_PPC64
-static __inline__ unsigned long
+static __always_inline unsigned long
__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
{
unsigned long prev;
@@ -406,7 +406,7 @@ __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
return prev;
}
-static __inline__ unsigned long
+static __always_inline unsigned long
__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
unsigned long new)
{
@@ -432,7 +432,7 @@ __cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
if something tries to do an invalid cmpxchg(). */
extern void __cmpxchg_called_with_bad_pointer(void);
-static __inline__ unsigned long
+static __always_inline unsigned long
__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
unsigned int size)
{
@@ -448,7 +448,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
return old;
}
-static __inline__ unsigned long
+static __always_inline unsigned long
__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
unsigned int size)
{
diff --git a/include/linux/lmb.h b/include/linux/lmb.h
index 271153d27fba..c46c89505dac 100644
--- a/include/linux/lmb.h
+++ b/include/linux/lmb.h
@@ -40,7 +40,8 @@ extern struct lmb lmb;
extern void __init lmb_init(void);
extern void __init lmb_analyze(void);
-extern long __init lmb_add(u64 base, u64 size);
+extern long lmb_add(u64 base, u64 size);
+extern long lmb_remove(u64 base, u64 size);
extern long __init lmb_reserve(u64 base, u64 size);
extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
u64 (*nid_range)(u64, u64, int *));
@@ -53,6 +54,7 @@ extern u64 __init lmb_phys_mem_size(void);
extern u64 __init lmb_end_of_DRAM(void);
extern void __init lmb_enforce_memory_limit(u64 memory_limit);
extern int __init lmb_is_reserved(u64 addr);
+extern int lmb_find(struct lmb_property *res);
extern void lmb_dump_all(void);
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 68e3f6853fa6..cfb66bbc0f27 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -23,7 +23,6 @@
#include <linux/device.h>
#include <linux/rio_regs.h>
-#define RIO_ANY_DESTID 0xff
#define RIO_NO_HOPCOUNT -1
#define RIO_INVALID_DESTID 0xffff
@@ -39,11 +38,8 @@
entry is invalid (no route
exists for the device ID) */
-#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
-#define RIO_MAX_ROUTE_ENTRIES (1 << 8)
-#else
-#define RIO_MAX_ROUTE_ENTRIES (1 << 16)
-#endif
+#define RIO_MAX_ROUTE_ENTRIES(size) (size ? (1 << 16) : (1 << 8))
+#define RIO_ANY_DESTID(size) (size ? 0xffff : 0xff)
#define RIO_MAX_MBOX 4
#define RIO_MAX_MSG_SIZE 0x1000
@@ -149,6 +145,11 @@ struct rio_dbell {
void *dev_id;
};
+enum rio_phy_type {
+ RIO_PHY_PARALLEL,
+ RIO_PHY_SERIAL,
+};
+
/**
* struct rio_mport - RIO master port info
* @dbells: List of doorbell events
@@ -163,6 +164,7 @@ struct rio_dbell {
* @id: Port ID, unique among all ports
* @index: Port index, unique among all port interfaces of the same type
* @name: Port name string
+ * @priv: Master port private data
*/
struct rio_mport {
struct list_head dbells; /* list of doorbell events */
@@ -177,7 +179,13 @@ struct rio_mport {
unsigned char id; /* port ID, unique among all ports */
unsigned char index; /* port index, unique among all port
interfaces of the same type */
+ unsigned int sys_size; /* RapidIO common transport system size.
+ * 0 - Small size. 256 devices.
+ * 1 - Large size, 65536 devices.
+ */
+ enum rio_phy_type phy_type; /* RapidIO phy type */
unsigned char name[40];
+ void *priv; /* Master port private data */
};
/**
@@ -211,7 +219,7 @@ struct rio_switch {
u16 switchid;
u16 hopcount;
u16 destid;
- u8 route_table[RIO_MAX_ROUTE_ENTRIES];
+ u8 *route_table;
int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
@@ -229,13 +237,15 @@ struct rio_switch {
* @dsend: Callback to send a doorbell message.
*/
struct rio_ops {
- int (*lcread) (int index, u32 offset, int len, u32 * data);
- int (*lcwrite) (int index, u32 offset, int len, u32 data);
- int (*cread) (int index, u16 destid, u8 hopcount, u32 offset, int len,
- u32 * data);
- int (*cwrite) (int index, u16 destid, u8 hopcount, u32 offset, int len,
- u32 data);
- int (*dsend) (int index, u16 destid, u16 data);
+ int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len,
+ u32 *data);
+ int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len,
+ u32 data);
+ int (*cread) (struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 *data);
+ int (*cwrite) (struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 data);
+ int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data);
};
#define RIO_RESOURCE_MEM 0x00000100
diff --git a/lib/lmb.c b/lib/lmb.c
index 207147ab25e4..83287d3869a3 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -46,14 +46,13 @@ void lmb_dump_all(void)
#endif /* DEBUG */
}
-static unsigned long __init lmb_addrs_overlap(u64 base1, u64 size1,
- u64 base2, u64 size2)
+static unsigned long lmb_addrs_overlap(u64 base1, u64 size1, u64 base2,
+ u64 size2)
{
return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
}
-static long __init lmb_addrs_adjacent(u64 base1, u64 size1,
- u64 base2, u64 size2)
+static long lmb_addrs_adjacent(u64 base1, u64 size1, u64 base2, u64 size2)
{
if (base2 == base1 + size1)
return 1;
@@ -63,7 +62,7 @@ static long __init lmb_addrs_adjacent(u64 base1, u64 size1,
return 0;
}
-static long __init lmb_regions_adjacent(struct lmb_region *rgn,
+static long lmb_regions_adjacent(struct lmb_region *rgn,
unsigned long r1, unsigned long r2)
{
u64 base1 = rgn->region[r1].base;
@@ -74,7 +73,7 @@ static long __init lmb_regions_adjacent(struct lmb_region *rgn,
return lmb_addrs_adjacent(base1, size1, base2, size2);
}
-static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
+static void lmb_remove_region(struct lmb_region *rgn, unsigned long r)
{
unsigned long i;
@@ -86,7 +85,7 @@ static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
}
/* Assumption: base addr of region 1 < base addr of region 2 */
-static void __init lmb_coalesce_regions(struct lmb_region *rgn,
+static void lmb_coalesce_regions(struct lmb_region *rgn,
unsigned long r1, unsigned long r2)
{
rgn->region[r1].size += rgn->region[r2].size;
@@ -118,7 +117,7 @@ void __init lmb_analyze(void)
lmb.memory.size += lmb.memory.region[i].size;
}
-static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
+static long lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
{
unsigned long coalesced = 0;
long adjacent, i;
@@ -182,7 +181,7 @@ static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
return 0;
}
-long __init lmb_add(u64 base, u64 size)
+long lmb_add(u64 base, u64 size)
{
struct lmb_region *_rgn = &lmb.memory;
@@ -194,6 +193,55 @@ long __init lmb_add(u64 base, u64 size)
}
+long lmb_remove(u64 base, u64 size)
+{
+ struct lmb_region *rgn = &(lmb.memory);
+ u64 rgnbegin, rgnend;
+ u64 end = base + size;
+ int i;
+
+ rgnbegin = rgnend = 0; /* supress gcc warnings */
+
+ /* Find the region where (base, size) belongs to */
+ for (i=0; i < rgn->cnt; i++) {
+ rgnbegin = rgn->region[i].base;
+ rgnend = rgnbegin + rgn->region[i].size;
+
+ if ((rgnbegin <= base) && (end <= rgnend))
+ break;
+ }
+
+ /* Didn't find the region */
+ if (i == rgn->cnt)
+ return -1;
+
+ /* Check to see if we are removing entire region */
+ if ((rgnbegin == base) && (rgnend == end)) {
+ lmb_remove_region(rgn, i);
+ return 0;
+ }
+
+ /* Check to see if region is matching at the front */
+ if (rgnbegin == base) {
+ rgn->region[i].base = end;
+ rgn->region[i].size -= size;
+ return 0;
+ }
+
+ /* Check to see if the region is matching at the end */
+ if (rgnend == end) {
+ rgn->region[i].size -= size;
+ return 0;
+ }
+
+ /*
+ * We need to split the entry - adjust the current one to the
+ * beginging of the hole and add the region after hole.
+ */
+ rgn->region[i].size = base - rgn->region[i].base;
+ return lmb_add_region(rgn, end, rgnend - end);
+}
+
long __init lmb_reserve(u64 base, u64 size)
{
struct lmb_region *_rgn = &lmb.reserved;
@@ -426,3 +474,36 @@ int __init lmb_is_reserved(u64 addr)
}
return 0;
}
+
+/*
+ * Given a <base, len>, find which memory regions belong to this range.
+ * Adjust the request and return a contiguous chunk.
+ */
+int lmb_find(struct lmb_property *res)
+{
+ int i;
+ u64 rstart, rend;
+
+ rstart = res->base;
+ rend = rstart + res->size - 1;
+
+ for (i = 0; i < lmb.memory.cnt; i++) {
+ u64 start = lmb.memory.region[i].base;
+ u64 end = start + lmb.memory.region[i].size - 1;
+
+ if (start > rend)
+ return -1;
+
+ if ((end >= rstart) && (start < rend)) {
+ /* adjust the request */
+ if (rstart < start)
+ rstart = start;
+ if (rend > end)
+ rend = end;
+ res->base = rstart;
+ res->size = rend - rstart + 1;
+ return 0;
+ }
+ }
+ return -1;
+}