summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/i2c/chips/x120538
-rw-r--r--drivers/rtc/rtc-x1205.c5
2 files changed, 4 insertions, 39 deletions
diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205
deleted file mode 100644
index 09407c991fe5..000000000000
--- a/Documentation/i2c/chips/x1205
+++ /dev/null
@@ -1,38 +0,0 @@
-Kernel driver x1205
-===================
-
-Supported chips:
- * Xicor X1205 RTC
- Prefix: 'x1205'
- Addresses scanned: none
- Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
-
-Authors:
- Karen Spearel <kas11@tampabay.rr.com>,
- Alessandro Zummo <a.zummo@towertech.it>
-
-Description
------------
-
-This module aims to provide complete access to the Xicor X1205 RTC.
-Recently Xicor has merged with Intersil, but the chip is
-still sold under the Xicor brand.
-
-This chip is located at address 0x6f and uses a 2-byte register addressing.
-Two bytes need to be written to read a single register, while most
-other chips just require one and take the second one as the data
-to be written. To prevent corrupting unknown chips, the user must
-explicitely set the probe parameter.
-
-example:
-
-modprobe x1205 probe=0,0x6f
-
-The module supports one more option, hctosys, which is used to set the
-software clock from the x1205. On systems where the x1205 is the
-only hardware rtc, this parameter could be used to achieve a correct
-date/time earlier in the system boot sequence.
-
-example:
-
-modprobe x1205 probe=0,0x6f hctosys=1
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index 513d1a611aab..b3fae357ca49 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -9,6 +9,9 @@
*
* based on a lot of other RTC drivers.
*
+ * Information and datasheet:
+ * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -26,7 +29,7 @@
* Two bytes need to be written to read a single register,
* while most other chips just require one and take the second
* one as the data to be written. To prevent corrupting
- * unknown chips, the user must explicitely set the probe parameter.
+ * unknown chips, the user must explicitly set the probe parameter.
*/
static unsigned short normal_i2c[] = { I2C_CLIENT_END };