summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS17
-rw-r--r--arch/arm/boot/dts/imx23.dtsi52
-rw-r--r--arch/arm/boot/dts/imx27-3ds.dts2
-rw-r--r--arch/arm/boot/dts/imx28.dtsi74
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts2
-rw-r--r--arch/arm/boot/dts/imx53-ard.dts22
-rw-r--r--arch/arm/boot/dts/imx6q-sabrelite.dts1
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig1
-rw-r--r--arch/arm/configs/mxs_defconfig1
-rw-r--r--arch/arm/configs/tct_hammer_defconfig2
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c39
-rw-r--r--arch/arm/mach-exynos/pm_domains.c2
-rw-r--r--arch/arm/mach-imx/clk-imx27.c8
-rw-r--r--arch/arm/mach-imx/clk-imx31.c2
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c1
-rw-r--r--arch/arm/mach-integrator/core.c1
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c2
-rw-r--r--arch/arm/mach-kirkwood/Makefile.boot4
-rw-r--r--arch/arm/mach-mxs/Kconfig6
-rw-r--r--arch/arm/mach-mxs/Makefile3
-rw-r--r--arch/arm/mach-pxa/raumfeld.c2
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig4
-rw-r--r--arch/arm/mach-sa1100/leds-hackkit.c1
-rw-r--r--arch/arm/mach-tegra/board-harmony-power.c32
-rw-r--r--arch/arm/plat-samsung/Kconfig3
-rw-r--r--drivers/char/hw_random/omap-rng.c2
-rw-r--r--drivers/gpio/gpio-em.c2
-rw-r--r--drivers/input/touchscreen/eeti_ts.c21
-rw-r--r--drivers/mfd/asic3.c1
-rw-r--r--drivers/mfd/ezx-pcap.c2
-rw-r--r--drivers/mtd/nand/Kconfig2
-rw-r--r--drivers/mtd/nand/omap2.c7
-rw-r--r--drivers/spi/spi-s3c64xx.c2
-rw-r--r--drivers/usb/host/ohci-omap.c2
-rw-r--r--include/linux/input/eeti_ts.h1
-rw-r--r--include/linux/mfd/ezx-pcap.h1
36 files changed, 160 insertions, 167 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 63ce3a38b332..f87589075552 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -925,14 +925,14 @@ S: Maintained
ARM/NOMADIK ARCHITECTURE
M: Alessandro Rubini <rubini@unipv.it>
-M: Linus Walleij <linus.walleij@stericsson.com>
+M: Linus Walleij <linus.walleij@linaro.org>
M: STEricsson <STEricsson_nomadik_linux@list.st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-nomadik/
F: arch/arm/plat-nomadik/
F: drivers/i2c/busses/i2c-nomadik.c
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
@@ -1146,7 +1146,7 @@ F: drivers/usb/host/ehci-w90x900.c
F: drivers/video/nuc900fb.c
ARM/U300 MACHINE SUPPORT
-M: Linus Walleij <linus.walleij@stericsson.com>
+M: Linus Walleij <linus.walleij@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: arch/arm/mach-u300/
@@ -1161,15 +1161,20 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/Ux500 ARM ARCHITECTURE
M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
-M: Linus Walleij <linus.walleij@stericsson.com>
+M: Linus Walleij <linus.walleij@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ux500/
+F: drivers/clocksource/clksrc-dbx500-prcmu.c
F: drivers/dma/ste_dma40*
+F: drivers/hwspinlock/u8500_hsem.c
F: drivers/mfd/abx500*
F: drivers/mfd/ab8500*
-F: drivers/mfd/stmpe*
+F: drivers/mfd/dbx500*
+F: drivers/mfd/db8500*
+F: drivers/pinctrl/pinctrl-nomadik*
F: drivers/rtc/rtc-ab8500.c
+F: drivers/rtc/rtc-pl031.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/VFP SUPPORT
@@ -3094,7 +3099,7 @@ F: include/linux/gigaset_dev.h
GPIO SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
-M: Linus Walleij <linus.walleij@stericsson.com>
+M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
T: git git://git.secretlab.ca/git/linux-2.6.git
F: Documentation/gpio.txt
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index a874dbfb5ae6..e6138310e5ce 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -51,11 +51,11 @@
dma-apbh@80004000 {
compatible = "fsl,imx23-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
ecc@80008000 {
- reg = <0x80008000 2000>;
+ reg = <0x80008000 0x2000>;
status = "disabled";
};
@@ -63,7 +63,7 @@
compatible = "fsl,imx23-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
@@ -72,14 +72,14 @@
};
ssp0: ssp@80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <15 14>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
etm@80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
status = "disabled";
};
@@ -87,7 +87,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx23-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
@@ -273,32 +273,32 @@
};
emi@80020000 {
- reg = <0x80020000 2000>;
+ reg = <0x80020000 0x2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp@80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
status = "disabled";
};
pxp@8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
status = "disabled";
};
ocotp@8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb@8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
@@ -310,14 +310,14 @@
};
ssp1: ssp@80034000 {
- reg = <0x80034000 2000>;
+ reg = <0x80034000 0x2000>;
interrupts = <2 20>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
tvenc@80038000 {
- reg = <0x80038000 2000>;
+ reg = <0x80038000 0x2000>;
status = "disabled";
};
};
@@ -330,37 +330,37 @@
ranges;
clkctl@80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif@80042000 {
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
status = "disabled";
};
power@80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif@80046000 {
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
status = "disabled";
};
audio-out@80048000 {
- reg = <0x80048000 2000>;
+ reg = <0x80048000 0x2000>;
status = "disabled";
};
audio-in@8004c000 {
- reg = <0x8004c000 2000>;
+ reg = <0x8004c000 0x2000>;
status = "disabled";
};
lradc@80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
@@ -370,26 +370,26 @@
};
i2c@80058000 {
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
status = "disabled";
};
rtc@8005c000 {
compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x8005c000 2000>;
+ reg = <0x8005c000 0x2000>;
interrupts = <22>;
};
pwm: pwm@80064000 {
compatible = "fsl,imx23-pwm";
- reg = <0x80064000 2000>;
+ reg = <0x80064000 0x2000>;
#pwm-cells = <2>;
fsl,pwm-number = <5>;
status = "disabled";
};
timrot@80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
@@ -429,7 +429,7 @@
ranges;
usbctrl@80080000 {
- reg = <0x80080000 0x10000>;
+ reg = <0x80080000 0x40000>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts
index d3f8296e19e0..0a8978a40ece 100644
--- a/arch/arm/boot/dts/imx27-3ds.dts
+++ b/arch/arm/boot/dts/imx27-3ds.dts
@@ -27,7 +27,7 @@
status = "okay";
};
- uart@1000a000 {
+ uart1: serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 787efac68da8..3fa6d190fab4 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -57,18 +57,18 @@
};
hsadc@80002000 {
- reg = <0x80002000 2000>;
+ reg = <0x80002000 0x2000>;
interrupts = <13 87>;
status = "disabled";
};
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
perfmon@80006000 {
- reg = <0x80006000 800>;
+ reg = <0x80006000 0x800>;
interrupts = <27>;
status = "disabled";
};
@@ -77,7 +77,7 @@
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
@@ -86,28 +86,28 @@
};
ssp0: ssp@80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp@80012000 {
- reg = <0x80012000 2000>;
+ reg = <0x80012000 0x2000>;
interrupts = <97 83>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp@80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
interrupts = <98 84>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp@80016000 {
- reg = <0x80016000 2000>;
+ reg = <0x80016000 0x2000>;
interrupts = <99 85>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
@@ -117,7 +117,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
@@ -510,96 +510,96 @@
};
digctl@8001c000 {
- reg = <0x8001c000 2000>;
+ reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
};
etm@80022000 {
- reg = <0x80022000 2000>;
+ reg = <0x80022000 0x2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp@80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
interrupts = <52 53 54>;
status = "disabled";
};
pxp@8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
interrupts = <39>;
status = "disabled";
};
ocotp@8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb@8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
- reg = <0x80030000 2000>;
+ reg = <0x80030000 0x2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
- reg = <0x80032000 2000>;
+ reg = <0x80032000 0x2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
- reg = <0x80034000 2000>;
+ reg = <0x80034000 0x2000>;
interrupts = <9>;
status = "disabled";
};
simdbg@8003c000 {
- reg = <0x8003c000 200>;
+ reg = <0x8003c000 0x200>;
status = "disabled";
};
simgpmisel@8003c200 {
- reg = <0x8003c200 100>;
+ reg = <0x8003c200 0x100>;
status = "disabled";
};
simsspsel@8003c300 {
- reg = <0x8003c300 100>;
+ reg = <0x8003c300 0x100>;
status = "disabled";
};
simmemsel@8003c400 {
- reg = <0x8003c400 100>;
+ reg = <0x8003c400 0x100>;
status = "disabled";
};
gpiomon@8003c500 {
- reg = <0x8003c500 100>;
+ reg = <0x8003c500 0x100>;
status = "disabled";
};
simenet@8003c700 {
- reg = <0x8003c700 100>;
+ reg = <0x8003c700 0x100>;
status = "disabled";
};
armjtag@8003c800 {
- reg = <0x8003c800 100>;
+ reg = <0x8003c800 0x100>;
status = "disabled";
};
};
@@ -612,45 +612,45 @@
ranges;
clkctl@80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
interrupts = <59 80>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
power@80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
interrupts = <58 81>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
spdif@80054000 {
- reg = <0x80054000 2000>;
+ reg = <0x80054000 0x2000>;
interrupts = <45 66>;
status = "disabled";
};
rtc@80056000 {
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x80056000 2000>;
+ reg = <0x80056000 0x2000>;
interrupts = <29>;
};
@@ -658,7 +658,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
interrupts = <111 68>;
clock-frequency = <100000>;
status = "disabled";
@@ -668,7 +668,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x8005a000 2000>;
+ reg = <0x8005a000 0x2000>;
interrupts = <110 69>;
clock-frequency = <100000>;
status = "disabled";
@@ -676,14 +676,14 @@
pwm: pwm@80064000 {
compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
- reg = <0x80064000 2000>;
+ reg = <0x80064000 0x2000>;
#pwm-cells = <2>;
fsl,pwm-number = <8>;
status = "disabled";
};
timrot@80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index de065b5976e6..cd86177a3ea2 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -53,7 +53,7 @@
spi-max-frequency = <6000000>;
reg = <0>;
interrupt-parent = <&gpio1>;
- interrupts = <8>;
+ interrupts = <8 0x4>;
regulators {
sw1_reg: sw1 {
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 5b8eafcdbeec..da895e93a999 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -64,12 +64,32 @@
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio2>;
- interrupts = <31>;
+ interrupts = <31 0x8>;
reg-io-width = <4>;
+ /*
+ * VDD33A and VDDVARIO of LAN9220 are supplied by
+ * SW4_3V3 of LTC3589. Before the regulator driver
+ * for this PMIC is available, we use a fixed dummy
+ * 3V3 regulator to get LAN9220 driver probing work.
+ */
+ vdd33a-supply = <&reg_3p3v>;
+ vddvario-supply = <&reg_3p3v>;
smsc,irq-push-pull;
};
};
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index d42e851ceb97..72f30f3e6171 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -53,6 +53,7 @@
fsl,pins = <
144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+ 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
>;
};
};
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index f725b9637b33..3c9f32f9b6b4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index ccdb6357fb74..4edcfb4e4dee 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -34,7 +34,6 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_AUTO_ZRELADDR=y
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 1d24f8458bef..71277a1591ba 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_KALLSYMS is not set
-# CONFIG_BUG is not set
+# CONFIG_BUGVERBOSE is not set
# CONFIG_ELF_CORE is not set
# CONFIG_SHMEM is not set
CONFIG_SLOB=y
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 5de69f2fcca9..f6b9fc70161b 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void)
dm644x_init();
}
-/*
- I2C initialization
-*/
-static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
- .bus_freq = 20 /* kHz */,
- .bus_delay = 100 /* usec */,
-};
-
-static struct i2c_board_info __initdata ntosd2_i2c_info[] = {
-};
-
-static int ntosd2_init_i2c(void)
-{
- int status;
-
- davinci_init_i2c(&ntosd2_i2c_pdata);
- status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
- if (status == 0) {
- status = gpio_direction_input(NTOSD2_MSP430_IRQ);
- if (status == 0) {
- status = gpio_to_irq(NTOSD2_MSP430_IRQ);
- if (status > 0) {
- ntosd2_i2c_info[0].irq = status;
- i2c_register_board_info(1,
- ntosd2_i2c_info,
- ARRAY_SIZE(ntosd2_i2c_info));
- }
- }
- }
- return status;
-}
-
static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
.wires = 4,
.version = MMC_CTLR_VERSION_1
@@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void)
{
struct clk *aemif_clk;
struct davinci_soc_info *soc_info = &davinci_soc_info;
- int status;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
@@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void)
platform_add_devices(davinci_ntosd2_devices,
ARRAY_SIZE(davinci_ntosd2_devices));
- /* Initialize I2C interface specific for this board */
- status = ntosd2_init_i2c();
- if (status < 0)
- pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
- " %d\n", status);
-
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_ntosd2_snd_data);
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 373c3c00d24c..c0bc83a7663e 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void)
}
#endif /* CONFIG_OF */
-static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
+static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
struct exynos_pm_domain *pd)
{
if (pdev->dev.bus) {
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 7aa6313fb167..f69ca4680049 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
- clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
@@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma");
- clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma");
+ clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0");
+ clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
+ clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8e19e70f90f9..1253af2d9971 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
- clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+ clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index f6086693ebd2..4bdcaa97bd98 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_prepare_enable(clk[aips_tz2]); /* fec */
clk_prepare_enable(clk[spba]);
clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+ clk_prepare_enable(clk[emi_slow_gate]); /* eim */
clk_prepare_enable(clk[tmax1]);
clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index ebf680bebdf2..3fa6c51390da 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 7b1055c8e0b9..3b2267529f5e 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -456,7 +456,7 @@ static void __init ap_init_timer(void)
clk = clk_get_sys("ap_timer", NULL);
BUG_ON(IS_ERR(clk));
- clk_enable(clk);
+ clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 2a576abf409b..a5717558ee89 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -9,5 +9,5 @@ dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb
dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
+dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
+dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ccdf83b17cf1..9a8bbda195b2 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -2,9 +2,6 @@ if ARCH_MXS
source "arch/arm/mach-mxs/devices/Kconfig"
-config MXS_OCOTP
- bool
-
config SOC_IMX23
bool
select ARM_AMBA
@@ -66,7 +63,6 @@ config MACH_MX28EVK
select MXS_HAVE_PLATFORM_MXS_SAIF
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_RTC_STMP3XXX
- select MXS_OCOTP
help
Include support for MX28EVK platform. This includes specific
configurations for the board and its peripherals.
@@ -94,7 +90,6 @@ config MODULE_M28
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
- select MXS_OCOTP
config MODULE_APX4
bool
@@ -106,7 +101,6 @@ config MODULE_APX4
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_SAIF
- select MXS_OCOTP
config MACH_TX28
bool "Ka-Ro TX28 module"
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index e41590ccb437..fed3695a1339 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,7 +1,6 @@
# Common support
-obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
-obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 5905ed130e94..d89d87ae144c 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
static struct eeti_ts_platform_data eeti_ts_pdata = {
.irq_active_high = 1,
+ .irq_gpio = GPIO_TOUCH_IRQ,
};
static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
.type = "eeti_ts",
.addr = 0x0a,
- .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
.platform_data = &eeti_ts_pdata,
};
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index e24961109b70..d56b0f7f2b20 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02
select I2C
select POWER_SUPPLY
select MACH_NEO1973
- select S3C2410_PWM
+ select S3C24XX_PWM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
@@ -493,7 +493,7 @@ config MACH_RX1950
select S3C24XX_DCLK
select PM_H1940 if PM
select I2C
- select S3C2410_PWM
+ select S3C24XX_PWM
select S3C_DEV_NAND
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index 6a2352436e62..f8e47235babe 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -10,6 +10,7 @@
* as cpu led, the green one is used as timer led.
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 8fd387bf31f0..b7344beec102 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = {
.consumer_supplies = tps658621_ldo0_supply,
};
-#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \
+#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\
static struct regulator_init_data _id##_data = { \
.supply_regulator = _supply, \
.constraints = { \
@@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = {
.valid_ops_mask = (REGULATOR_CHANGE_MODE | \
REGULATOR_CHANGE_STATUS | \
REGULATOR_CHANGE_VOLTAGE), \
+ .always_on = _on, \
}, \
}
-HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500);
-HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500);
-HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550);
-HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500);
-HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500);
-HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475);
-HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300);
+HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1);
+HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0);
+HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1);
+HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1);
+HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1);
+HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1);
#define TPS_REG(_id, _data) \
{ \
@@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = {
int __init harmony_regulator_init(void)
{
+ regulator_register_always_on(0, "vdd_sys",
+ NULL, 0, 5000000);
+
if (machine_is_harmony()) {
- regulator_register_always_on(0, "vdd_sys",
- NULL, 0, 5000000);
i2c_register_board_info(3, harmony_regulators, 1);
} else { /* Harmony, booted using device tree */
struct device_node *np;
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 7aca31c1df1f..9c3b90c3538e 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI
config S3C24XX_PWM
bool "PWM device support"
- select HAVE_PWM
+ select PWM
+ select PWM_SAMSUNG
help
Support for exporting the PWM timer blocks via the pwm device
system
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index d706bd0e9e80..4fbdceb6f773 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -160,7 +160,7 @@ static int __exit omap_rng_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int omap_rng_suspend(struct device *dev)
{
diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index 150d9768811d..ae37181798b3 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -266,7 +266,7 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p)
return 0;
}
-static void __devexit em_gio_irq_domain_cleanup(struct em_gio_priv *p)
+static void em_gio_irq_domain_cleanup(struct em_gio_priv *p)
{
struct gpio_em_config *pdata = p->pdev->dev.platform_data;
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
index 503c7096ed36..908407efc672 100644
--- a/drivers/input/touchscreen/eeti_ts.c
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -48,7 +48,7 @@ struct eeti_ts_priv {
struct input_dev *input;
struct work_struct work;
struct mutex mutex;
- int irq, irq_active_high;
+ int irq_gpio, irq, irq_active_high;
};
#define EETI_TS_BITDEPTH (11)
@@ -62,7 +62,7 @@ struct eeti_ts_priv {
static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv)
{
- return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high;
+ return gpio_get_value(priv->irq_gpio) == priv->irq_active_high;
}
static void eeti_ts_read(struct work_struct *work)
@@ -157,7 +157,7 @@ static void eeti_ts_close(struct input_dev *dev)
static int __devinit eeti_ts_probe(struct i2c_client *client,
const struct i2c_device_id *idp)
{
- struct eeti_ts_platform_data *pdata;
+ struct eeti_ts_platform_data *pdata = client->dev.platform_data;
struct eeti_ts_priv *priv;
struct input_dev *input;
unsigned int irq_flags;
@@ -199,9 +199,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
priv->client = client;
priv->input = input;
- priv->irq = client->irq;
+ priv->irq_gpio = pdata->irq_gpio;
+ priv->irq = gpio_to_irq(pdata->irq_gpio);
- pdata = client->dev.platform_data;
+ err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name);
+ if (err < 0)
+ goto err1;
if (pdata)
priv->irq_active_high = pdata->irq_active_high;
@@ -215,13 +218,13 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
err = input_register_device(input);
if (err)
- goto err1;
+ goto err2;
err = request_irq(priv->irq, eeti_ts_isr, irq_flags,
client->name, priv);
if (err) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
- goto err2;
+ goto err3;
}
/*
@@ -233,9 +236,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client,
device_init_wakeup(&client->dev, 0);
return 0;
-err2:
+err3:
input_unregister_device(input);
input = NULL; /* so we dont try to free it below */
+err2:
+ gpio_free(pdata->irq_gpio);
err1:
input_free_device(input);
kfree(priv);
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 383421bf5760..683e18a23329 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -925,6 +925,7 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
goto out;
}
+ ret = 0;
if (pdata->leds) {
int i;
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index 43a76c41cfcc..db662e2dcfa5 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -202,7 +202,7 @@ static void pcap_isr_work(struct work_struct *work)
}
local_irq_enable();
ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr);
- } while (gpio_get_value(irq_to_gpio(pcap->spi->irq)));
+ } while (gpio_get_value(pdata->gpio));
}
static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 31bb7e5b504a..8ca417614c57 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -480,7 +480,7 @@ config MTD_NAND_NANDSIM
config MTD_NAND_GPMI_NAND
bool "GPMI NAND Flash Controller driver"
- depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
+ depends on MTD_NAND && MXS_DMA
help
Enables NAND Flash support for IMX23 or IMX28.
The GPMI controller is very powerful, with the help of BCH
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index e9309b3659e7..ac4fd756eda3 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1245,7 +1245,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
goto out_release_mem_region;
} else {
struct dma_slave_config cfg;
- int rc;
memset(&cfg, 0, sizeof(cfg));
cfg.src_addr = info->phys_base;
@@ -1254,10 +1253,10 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.src_maxburst = 16;
cfg.dst_maxburst = 16;
- rc = dmaengine_slave_config(info->dma, &cfg);
- if (rc) {
+ err = dmaengine_slave_config(info->dma, &cfg);
+ if (err) {
dev_err(&pdev->dev, "DMA engine slave config failed: %d\n",
- rc);
+ err);
goto out_release_mem_region;
}
info->nand.read_buf = omap_read_buf_dma_pref;
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 646a7657fe62..cfa2c35dfeed 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -826,7 +826,7 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
struct spi_device *spi)
{
struct s3c64xx_spi_csinfo *cs;
- struct device_node *slave_np, *data_np;
+ struct device_node *slave_np, *data_np = NULL;
u32 fb_delay = 0;
slave_np = spi->dev.of_node;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index e7d75d295988..f8b2d91851f7 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -403,8 +403,6 @@ err0:
static inline void
usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
-
usb_remove_hcd(hcd);
if (!IS_ERR_OR_NULL(hcd->phy)) {
(void) otg_set_host(hcd->phy->otg, 0);
diff --git a/include/linux/input/eeti_ts.h b/include/linux/input/eeti_ts.h
index f875b316249d..16625d799b6f 100644
--- a/include/linux/input/eeti_ts.h
+++ b/include/linux/input/eeti_ts.h
@@ -2,6 +2,7 @@
#define LINUX_INPUT_EETI_TS_H
struct eeti_ts_platform_data {
+ int irq_gpio;
unsigned int irq_active_high;
};
diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h
index 40c372165f3e..32a1b5cfeba1 100644
--- a/include/linux/mfd/ezx-pcap.h
+++ b/include/linux/mfd/ezx-pcap.h
@@ -16,6 +16,7 @@ struct pcap_subdev {
struct pcap_platform_data {
unsigned int irq_base;
unsigned int config;
+ int gpio;
void (*init) (void *); /* board specific init */
int num_subdevs;
struct pcap_subdev *subdevs;