summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/firmware/arm_scmi/bus.c8
-rw-r--r--drivers/firmware/arm_scmi/driver.c14
-rw-r--r--drivers/firmware/arm_scmi/notify.c4
-rw-r--r--drivers/firmware/arm_scmi/sensors.c6
-rw-r--r--include/linux/scmi_protocol.h14
-rw-r--r--include/linux/scpi_protocol.h8
6 files changed, 37 insertions, 17 deletions
diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index 784cf0027da3..6c7e24935eca 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -104,11 +104,6 @@ static int scmi_dev_probe(struct device *dev)
{
struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver);
struct scmi_device *scmi_dev = to_scmi_dev(dev);
- const struct scmi_device_id *id;
-
- id = scmi_dev_match_id(scmi_dev, scmi_drv);
- if (!id)
- return -ENODEV;
if (!scmi_dev->handle)
return -EPROBE_DEFER;
@@ -139,6 +134,9 @@ int scmi_driver_register(struct scmi_driver *driver, struct module *owner,
{
int retval;
+ if (!driver->probe)
+ return -EINVAL;
+
retval = scmi_protocol_device_request(driver->id_table);
if (retval)
return retval;
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 66e5e694be7d..9b2e8d42a992 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -47,7 +47,6 @@ enum scmi_error_codes {
SCMI_ERR_GENERIC = -8, /* Generic Error */
SCMI_ERR_HARDWARE = -9, /* Hardware Error */
SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
- SCMI_ERR_MAX
};
/* List of all SCMI devices active in system */
@@ -166,8 +165,10 @@ static const int scmi_linux_errmap[] = {
static inline int scmi_to_linux_errno(int errno)
{
- if (errno < SCMI_SUCCESS && errno > SCMI_ERR_MAX)
- return scmi_linux_errmap[-errno];
+ int err_idx = -errno;
+
+ if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
+ return scmi_linux_errmap[err_idx];
return -EIO;
}
@@ -1025,8 +1026,9 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo,
const struct scmi_desc *desc = sinfo->desc;
/* Pre-allocated messages, no more than what hdr.seq can support */
- if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) {
- dev_err(dev, "Maximum message of %d exceeds supported %ld\n",
+ if (WARN_ON(!desc->max_msg || desc->max_msg > MSG_TOKEN_MAX)) {
+ dev_err(dev,
+ "Invalid maximum messages %d, not in range [1 - %lu]\n",
desc->max_msg, MSG_TOKEN_MAX);
return -EINVAL;
}
@@ -1137,6 +1139,8 @@ scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
* @proto_id and @name: if device was still not existent it is created as a
* child of the specified SCMI instance @info and its transport properly
* initialized as usual.
+ *
+ * Return: A properly initialized scmi device, NULL otherwise.
*/
static inline struct scmi_device *
scmi_get_protocol_device(struct device_node *np, struct scmi_info *info,
diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
index d860bebd984a..0efd20cd9d69 100644
--- a/drivers/firmware/arm_scmi/notify.c
+++ b/drivers/firmware/arm_scmi/notify.c
@@ -1457,6 +1457,8 @@ static void scmi_devm_release_notifier(struct device *dev, void *res)
*
* Generic devres managed helper to register a notifier_block against a
* protocol event.
+ *
+ * Return: 0 on Success
*/
static int scmi_devm_notifier_register(struct scmi_device *sdev,
u8 proto_id, u8 evt_id,
@@ -1523,6 +1525,8 @@ static int scmi_devm_notifier_match(struct device *dev, void *res, void *data)
* Generic devres managed helper to explicitly un-register a notifier_block
* against a protocol event, which was previously registered using the above
* @scmi_devm_notifier_register.
+ *
+ * Return: 0 on Success
*/
static int scmi_devm_notifier_unregister(struct scmi_device *sdev,
u8 proto_id, u8 evt_id,
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 2c88aa221559..308471586381 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -166,7 +166,8 @@ struct scmi_msg_sensor_reading_get {
struct scmi_resp_sensor_reading_complete {
__le32 id;
- __le64 readings;
+ __le32 readings_low;
+ __le32 readings_high;
};
struct scmi_sensor_reading_resp {
@@ -717,7 +718,8 @@ static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
resp = t->rx.buf;
if (le32_to_cpu(resp->id) == sensor_id)
- *value = get_unaligned_le64(&resp->readings);
+ *value =
+ get_unaligned_le64(&resp->readings_low);
else
ret = -EPROTO;
}
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 79d0a1237e6c..80e781c51ddc 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -101,6 +101,10 @@ struct scmi_clk_proto_ops {
* to sustained performance level mapping
* @est_power_get: gets the estimated power cost for a given performance domain
* at a given frequency
+ * @fast_switch_possible: indicates if fast DVFS switching is possible or not
+ * for a given device
+ * @power_scale_mw_get: indicates if the power values provided are in milliWatts
+ * or in some other (abstract) scale
*/
struct scmi_perf_proto_ops {
int (*limits_set)(const struct scmi_protocol_handle *ph, u32 domain,
@@ -153,7 +157,7 @@ struct scmi_power_proto_ops {
};
/**
- * scmi_sensor_reading - represent a timestamped read
+ * struct scmi_sensor_reading - represent a timestamped read
*
* Used by @reading_get_timestamped method.
*
@@ -167,7 +171,7 @@ struct scmi_sensor_reading {
};
/**
- * scmi_range_attrs - specifies a sensor or axis values' range
+ * struct scmi_range_attrs - specifies a sensor or axis values' range
* @min_range: The minimum value which can be represented by the sensor/axis.
* @max_range: The maximum value which can be represented by the sensor/axis.
*/
@@ -177,7 +181,7 @@ struct scmi_range_attrs {
};
/**
- * scmi_sensor_axis_info - describes one sensor axes
+ * struct scmi_sensor_axis_info - describes one sensor axes
* @id: The axes ID.
* @type: Axes type. Chosen amongst one of @enum scmi_sensor_class.
* @scale: Power-of-10 multiplier applied to the axis unit.
@@ -205,8 +209,8 @@ struct scmi_sensor_axis_info {
};
/**
- * scmi_sensor_intervals_info - describes number and type of available update
- * intervals
+ * struct scmi_sensor_intervals_info - describes number and type of available
+ * update intervals
* @segmented: Flag for segmented intervals' representation. When True there
* will be exactly 3 intervals in @desc, with each entry
* representing a member of a segment in this order:
diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h
index afbf8037d8db..d2176a56828a 100644
--- a/include/linux/scpi_protocol.h
+++ b/include/linux/scpi_protocol.h
@@ -51,6 +51,14 @@ struct scpi_sensor_info {
* OPP is an index to the list return by @dvfs_get_info
* @dvfs_get_info: returns the DVFS capabilities of the given power
* domain. It includes the OPP list and the latency information
+ * @device_domain_id: gets the scpi domain id for a given device
+ * @get_transition_latency: gets the DVFS transition latency for a given device
+ * @add_opps_to_device: adds all the OPPs for a given device
+ * @sensor_get_capability: get the list of capabilities for the sensors
+ * @sensor_get_info: get the information of the specified sensor
+ * @sensor_get_value: gets the current value of the sensor
+ * @device_get_power_state: gets the power state of a power domain
+ * @device_set_power_state: sets the power state of a power domain
*/
struct scpi_ops {
u32 (*get_version)(void);