summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-sa1100/shannon.c9
-rw-r--r--drivers/video/fbdev/sa1100fb.c20
-rw-r--r--drivers/video/fbdev/sa1100fb.h3
3 files changed, 21 insertions, 11 deletions
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 5bc82e2671c6..351f891b4842 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -104,6 +104,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = {
.enabled_at_boot = 1,
};
+static struct gpiod_lookup_table shannon_display_gpio_table = {
+ .dev_id = "sa11x0-fb",
+ .table = {
+ GPIO_LOOKUP("gpio", 22, "shannon-lcden", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init shannon_init(void)
{
sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
@@ -113,6 +121,7 @@ static void __init shannon_init(void)
sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table);
sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table);
sa11x0_ppc_configure_mcp();
+ gpiod_add_lookup_table(&shannon_display_gpio_table);
sa11x0_register_lcd(&shannon_lcd_info);
sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
sa11x0_register_mcp(&shannon_mcp_data);
diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 2d285cc384cf..3e6e13f7a831 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
@@ -173,7 +173,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
@@ -799,8 +799,8 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
- if (machine_is_shannon())
- gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
+ if (fbi->shannon_lcden)
+ gpiod_set_value(fbi->shannon_lcden, 1);
dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
@@ -817,8 +817,8 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
dev_dbg(fbi->dev, "Disabling LCD controller\n");
- if (machine_is_shannon())
- gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
+ if (fbi->shannon_lcden)
+ gpiod_set_value(fbi->shannon_lcden, 0);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1173,12 +1173,10 @@ static int sa1100fb_probe(struct platform_device *pdev)
return ret;
}
- if (machine_is_shannon()) {
- ret = devm_gpio_request_one(&pdev->dev, SHANNON_GPIO_DISP_EN,
- GPIOF_OUT_INIT_LOW, "display enable");
- if (ret)
- return ret;
- }
+ fbi->shannon_lcden = gpiod_get_optional(&pdev->dev, "shannon-lcden",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(fbi->shannon_lcden))
+ return PTR_ERR(fbi->shannon_lcden);
/* Initialize video memory */
ret = sa1100fb_map_video_memory(fbi);
diff --git a/drivers/video/fbdev/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index d0aa33b0b88a..b4363444fa5d 100644
--- a/drivers/video/fbdev/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h
@@ -10,6 +10,8 @@
* for more details.
*/
+struct gpio_desc;
+
#define LCCR0 0x0000 /* LCD Control Reg. 0 */
#define LCSR 0x0004 /* LCD Status Reg. */
#define DBAR1 0x0010 /* LCD DMA Base Address Reg. channel 1 */
@@ -33,6 +35,7 @@ struct sa1100fb_info {
struct device *dev;
const struct sa1100fb_rgb *rgb[NR_RGB];
void __iomem *base;
+ struct gpio_desc *shannon_lcden;
/*
* These are the addresses we mapped