summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--drivers/ata/Kconfig511
-rw-r--r--drivers/ata/Makefile83
-rw-r--r--drivers/ata/ata_generic.c2
-rw-r--r--drivers/ata/ata_piix.c4
-rw-r--r--drivers/ata/libata-core.c16
-rw-r--r--drivers/ata/libata-sff.c416
-rw-r--r--drivers/ata/pata_acpi.c2
-rw-r--r--drivers/ata/pata_ali.c5
-rw-r--r--drivers/ata/pata_amd.c2
-rw-r--r--drivers/ata/pata_artop.c2
-rw-r--r--drivers/ata/pata_atiixp.c4
-rw-r--r--drivers/ata/pata_atp867x.c2
-rw-r--r--drivers/ata/pata_bf54x.c2
-rw-r--r--drivers/ata/pata_cmd64x.c2
-rw-r--r--drivers/ata/pata_cs5520.c2
-rw-r--r--drivers/ata/pata_cs5530.c2
-rw-r--r--drivers/ata/pata_cs5535.c2
-rw-r--r--drivers/ata/pata_cs5536.c2
-rw-r--r--drivers/ata/pata_cypress.c2
-rw-r--r--drivers/ata/pata_efar.c4
-rw-r--r--drivers/ata/pata_hpt366.c2
-rw-r--r--drivers/ata/pata_hpt37x.c2
-rw-r--r--drivers/ata/pata_hpt3x2n.c2
-rw-r--r--drivers/ata/pata_hpt3x3.c2
-rw-r--r--drivers/ata/pata_icside.c2
-rw-r--r--drivers/ata/pata_it8213.c2
-rw-r--r--drivers/ata/pata_it821x.c2
-rw-r--r--drivers/ata/pata_jmicron.c2
-rw-r--r--drivers/ata/pata_macio.c2
-rw-r--r--drivers/ata/pata_marvell.c2
-rw-r--r--drivers/ata/pata_mpc52xx.c2
-rw-r--r--drivers/ata/pata_netcell.c2
-rw-r--r--drivers/ata/pata_ninja32.c2
-rw-r--r--drivers/ata/pata_ns87415.c2
-rw-r--r--drivers/ata/pata_octeon_cf.c18
-rw-r--r--drivers/ata/pata_oldpiix.c2
-rw-r--r--drivers/ata/pata_optidma.c2
-rw-r--r--drivers/ata/pata_pdc2027x.c2
-rw-r--r--drivers/ata/pata_pdc202xx_old.c2
-rw-r--r--drivers/ata/pata_piccolo.c2
-rw-r--r--drivers/ata/pata_radisys.c2
-rw-r--r--drivers/ata/pata_rdc.c4
-rw-r--r--drivers/ata/pata_sc1200.c2
-rw-r--r--drivers/ata/pata_scc.c4
-rw-r--r--drivers/ata/pata_sch.c2
-rw-r--r--drivers/ata/pata_serverworks.c2
-rw-r--r--drivers/ata/pata_sil680.c4
-rw-r--r--drivers/ata/pata_sis.c2
-rw-r--r--drivers/ata/pata_sl82c105.c2
-rw-r--r--drivers/ata/pata_triflex.c2
-rw-r--r--drivers/ata/pata_via.c2
-rw-r--r--drivers/ata/sata_mv.c4
-rw-r--r--drivers/ata/sata_nv.c8
-rw-r--r--drivers/ata/sata_qstor.c16
-rw-r--r--drivers/ata/sata_sil.c4
-rw-r--r--drivers/ata/sata_sis.c4
-rw-r--r--drivers/ata/sata_svw.c2
-rw-r--r--drivers/ata/sata_uli.c2
-rw-r--r--drivers/ata/sata_via.c8
-rw-r--r--drivers/ata/sata_vsc.c2
-rw-r--r--include/linux/libata.h36
62 files changed, 720 insertions, 519 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b56ea860da21..a5c055066764 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1252,6 +1252,8 @@ and is between 256 and 4096 characters. It is defined in the file
* nohrst, nosrst, norst: suppress hard, soft
and both resets.
+ * dump_id: dump IDENTIFY data.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e68541f662b9..73f883333a0d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -57,6 +57,8 @@ config SATA_PMP
This option adds support for SATA Port Multipliers
(the SATA version of an ethernet hub, or SAS expander).
+comment "Controllers with non-SFF native interface"
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
@@ -73,11 +75,12 @@ config SATA_AHCI_PLATFORM
If unsure, say N.
-config SATA_SIL24
- tristate "Silicon Image 3124/3132 SATA support"
- depends on PCI
+config SATA_FSL
+ tristate "Freescale 3.0Gbps SATA support"
+ depends on FSL_SOC
help
- This option enables support for Silicon Image 3124/3132 Serial ATA.
+ This option enables support for Freescale 3.0Gbps SATA controller.
+ It can be found on MPC837x and MPC8315.
If unsure, say N.
@@ -87,12 +90,11 @@ config SATA_INIC162X
help
This option enables support for Initio 162x Serial ATA.
-config SATA_FSL
- tristate "Freescale 3.0Gbps SATA support"
- depends on FSL_SOC
+config SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on PCI
help
- This option enables support for Freescale 3.0Gbps SATA controller.
- It can be found on MPC837x and MPC8315.
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
@@ -116,15 +118,65 @@ config ATA_SFF
if ATA_SFF
-config SATA_SVW
- tristate "ServerWorks Frodo / Apple K2 SATA support"
+comment "SFF controllers with custom DMA interface"
+
+config PDC_ADMA
+ tristate "Pacific Digital ADMA support"
depends on PCI
help
- This option enables support for Broadcom/Serverworks/Apple K2
- SATA support.
+ This option enables support for Pacific Digital ADMA controllers
+
+ If unsure, say N.
+
+config PATA_MPC52xx
+ tristate "Freescale MPC52xx SoC internal IDE"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
+ select PPC_BESTCOMM_ATA
+ help
+ This option enables support for integrated IDE controller
+ of the Freescale MPC52xx SoC.
+
+ If unsure, say N.
+
+config PATA_OCTEON_CF
+ tristate "OCTEON Boot Bus Compact Flash support"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ This option enables a polled compact flash driver for use with
+ compact flash cards attached to the OCTEON boot bus.
+
+ If unsure, say N.
+
+config SATA_QSTOR
+ tristate "Pacific Digital SATA QStor support"
+ depends on PCI
+ help
+ This option enables support for Pacific Digital Serial ATA QStor.
+
+ If unsure, say N.
+
+config SATA_SX4
+ tristate "Promise SATA SX4 support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for Promise Serial ATA SX4.
If unsure, say N.
+config ATA_BMDMA
+ bool "ATA BMDMA support"
+ default y
+ help
+ This option adds support for SFF ATA controllers with BMDMA
+ capability. BMDMA stands for bus-master DMA and the
+ de-facto DMA interface for SFF controllers.
+
+ If unuser, say Y.
+
+if ATA_BMDMA
+
+comment "SATA SFF controllers with BMDMA"
+
config ATA_PIIX
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
depends on PCI
@@ -152,22 +204,6 @@ config SATA_NV
If unsure, say N.
-config PDC_ADMA
- tristate "Pacific Digital ADMA support"
- depends on PCI
- help
- This option enables support for Pacific Digital ADMA controllers
-
- If unsure, say N.
-
-config SATA_QSTOR
- tristate "Pacific Digital SATA QStor support"
- depends on PCI
- help
- This option enables support for Pacific Digital Serial ATA QStor.
-
- If unsure, say N.
-
config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on PCI
@@ -176,14 +212,6 @@ config SATA_PROMISE
If unsure, say N.
-config SATA_SX4
- tristate "Promise SATA SX4 support (Experimental)"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for Promise Serial ATA SX4.
-
- If unsure, say N.
-
config SATA_SIL
tristate "Silicon Image SATA support"
depends on PCI
@@ -203,6 +231,15 @@ config SATA_SIS
enable the PATA_SIS driver in the config.
If unsure, say N.
+config SATA_SVW
+ tristate "ServerWorks Frodo / Apple K2 SATA support"
+ depends on PCI
+ help
+ This option enables support for Broadcom/Serverworks/Apple K2
+ SATA support.
+
+ If unsure, say N.
+
config SATA_ULI
tristate "ULi Electronics SATA support"
depends on PCI
@@ -227,14 +264,7 @@ config SATA_VITESSE
If unsure, say N.
-config PATA_ACPI
- tristate "ACPI firmware driver for PATA"
- depends on ATA_ACPI
- help
- This option enables an ACPI method driver which drives
- motherboard PATA controller interfaces through the ACPI
- firmware in the BIOS. This driver can sometimes handle
- otherwise unsupported hardware.
+comment "PATA SFF controllers with BMDMA"
config PATA_ALI
tristate "ALi PATA support"
@@ -262,40 +292,30 @@ config PATA_ARTOP
If unsure, say N.
-config PATA_ATP867X
- tristate "ARTOP/Acard ATP867X PATA support"
+config PATA_ATIIXP
+ tristate "ATI PATA support"
depends on PCI
help
- This option enables support for ARTOP/Acard ATP867X PATA
- controllers.
-
- If unsure, say N.
-
-config PATA_AT32
- tristate "Atmel AVR32 PATA support (Experimental)"
- depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
- help
- This option enables support for the IDE devices on the
- Atmel AT32AP platform.
+ This option enables support for the ATI ATA interfaces
+ found on the many ATI chipsets.
If unsure, say N.
-config PATA_ATIIXP
- tristate "ATI PATA support"
+config PATA_ATP867X
+ tristate "ARTOP/Acard ATP867X PATA support"
depends on PCI
help
- This option enables support for the ATI ATA interfaces
- found on the many ATI chipsets.
+ This option enables support for ARTOP/Acard ATP867X PATA
+ controllers.
If unsure, say N.
-config PATA_CMD640_PCI
- tristate "CMD640 PCI PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+config PATA_BF54X
+ tristate "Blackfin 54x ATAPI support"
+ depends on BF542 || BF548 || BF549
help
- This option enables support for the CMD640 PCI IDE
- interface chip. Only the primary channel is currently
- supported.
+ This option enables support for the built-in ATAPI controller on
+ Blackfin 54x family chips.
If unsure, say N.
@@ -362,15 +382,6 @@ config PATA_EFAR
If unsure, say N.
-config ATA_GENERIC
- tristate "Generic ATA support"
- depends on PCI
- help
- This option enables support for generic BIOS configured
- ATA controllers via the new ATA layer
-
- If unsure, say N.
-
config PATA_HPT366
tristate "HPT 366/368 PATA support"
depends on PCI
@@ -415,12 +426,20 @@ config PATA_HPT3X3_DMA
controllers. Enable with care as there are still some
problems with DMA on this chipset.
-config PATA_ISAPNP
- tristate "ISA Plug and Play PATA support"
- depends on ISAPNP
+config PATA_ICSIDE
+ tristate "Acorn ICS PATA support"
+ depends on ARM && ARCH_ACORN
help
- This option enables support for ISA plug & play ATA
- controllers such as those found on old soundcards.
+ On Acorn systems, say Y here if you wish to use the ICS PATA
+ interface card. This is not required for ICS partition support.
+ If you are unsure, say N to this.
+
+config PATA_IT8213
+ tristate "IT8213 PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the ITE 821 PATA
+ controllers via the new ATA layer.
If unsure, say N.
@@ -434,15 +453,6 @@ config PATA_IT821X
If unsure, say N.
-config PATA_IT8213
- tristate "IT8213 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
- help
- This option enables support for the ITE 821 PATA
- controllers via the new ATA layer.
-
- If unsure, say N.
-
config PATA_JMICRON
tristate "JMicron PATA support"
depends on PCI
@@ -452,23 +462,14 @@ config PATA_JMICRON
If unsure, say N.
-config PATA_LEGACY
- tristate "Legacy ISA PATA support (Experimental)"
- depends on (ISA || PCI) && EXPERIMENTAL
- help
- This option enables support for ISA/VLB/PCI bus legacy PATA
- ports and allows them to be accessed via the new ATA layer.
-
- If unsure, say N.
-
-config PATA_TRIFLEX
- tristate "Compaq Triflex PATA support"
- depends on PCI
+config PATA_MACIO
+ tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
+ depends on PPC_PMAC
help
- Enable support for the Compaq 'Triflex' IDE controller as found
- on many Compaq Pentium-Pro systems, via the new ATA layer.
-
- If unsure, say N.
+ Most IDE capable PowerMacs have IDE busses driven by a variant
+ of this controller which is part of the Apple chipset used on
+ most PowerMac models. Some models have multiple busses using
+ different chipsets, though generally, MacIO is one of them.
config PATA_MARVELL
tristate "Marvell PATA support via legacy mode"
@@ -481,32 +482,6 @@ config PATA_MARVELL
If unsure, say N.
-config PATA_MPC52xx
- tristate "Freescale MPC52xx SoC internal IDE"
- depends on PPC_MPC52xx && PPC_BESTCOMM
- select PPC_BESTCOMM_ATA
- help
- This option enables support for integrated IDE controller
- of the Freescale MPC52xx SoC.
-
- If unsure, say N.
-
-config PATA_MPIIX
- tristate "Intel PATA MPIIX support"
- depends on PCI
- help
- This option enables support for MPIIX PATA support.
-
- If unsure, say N.
-
-config PATA_OLDPIIX
- tristate "Intel PATA old PIIX support"
- depends on PCI
- help
- This option enables support for early PIIX PATA support.
-
- If unsure, say N.
-
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
depends on PCI
@@ -525,15 +500,6 @@ config PATA_NINJA32
If unsure, say N.
-config PATA_NS87410
- tristate "Nat Semi NS87410 PATA support"
- depends on PCI
- help
- This option enables support for the National Semiconductor
- NS87410 PCI-IDE controller.
-
- If unsure, say N.
-
config PATA_NS87415
tristate "Nat Semi NS87415 PATA support"
depends on PCI
@@ -543,12 +509,11 @@ config PATA_NS87415
If unsure, say N.
-config PATA_OPTI
- tristate "OPTI621/6215 PATA support (Very Experimental)"
- depends on PCI && EXPERIMENTAL
+config PATA_OLDPIIX
+ tristate "Intel PATA old PIIX support"
+ depends on PCI
help
- This option enables full PIO support for the early Opti ATA
- controllers found on some old motherboards.
+ This option enables support for early PIIX PATA support.
If unsure, say N.
@@ -562,24 +527,6 @@ config PATA_OPTIDMA
If unsure, say N.
-config PATA_PALMLD
- tristate "Palm LifeDrive PATA support"
- depends on MACH_PALMLD
- help
- This option enables support for Palm LifeDrive's internal ATA
- port via the new ATA layer.
-
- If unsure, say N.
-
-config PATA_PCMCIA
- tristate "PCMCIA PATA support"
- depends on PCMCIA
- help
- This option enables support for PCMCIA ATA interfaces, including
- compact flash card adapters via the new ATA layer.
-
- If unsure, say N.
-
config PATA_PDC2027X
tristate "Promise PATA 2027x support"
depends on PCI
@@ -597,12 +544,6 @@ config PATA_PDC_OLD
If unsure, say N.
-config PATA_QDI
- tristate "QDI VLB PATA support"
- depends on ISA
- help
- Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-
config PATA_RADISYS
tristate "RADISYS 82600 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
@@ -612,15 +553,6 @@ config PATA_RADISYS
If unsure, say N.
-config PATA_RB532
- tristate "RouterBoard 532 PATA CompactFlash support"
- depends on MIKROTIK_RB532
- help
- This option enables support for the RouterBoard 532
- PATA CompactFlash controller.
-
- If unsure, say N.
-
config PATA_RDC
tristate "RDC PATA support"
depends on PCI
@@ -631,21 +563,30 @@ config PATA_RDC
If unsure, say N.
-config PATA_RZ1000
- tristate "PC Tech RZ1000 PATA support"
+config PATA_SC1200
+ tristate "SC1200 PATA support"
depends on PCI
help
- This option enables basic support for the PC Tech RZ1000/1
- PATA controllers via the new ATA layer
+ This option enables support for the NatSemi/AMD SC1200 SoC
+ companion chip used with the Geode processor family.
If unsure, say N.
-config PATA_SC1200
- tristate "SC1200 PATA support"
+config PATA_SCC
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PCI && PPC_CELLEB
+ help
+ This option enables support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+
+ If unsure, say N.
+
+config PATA_SCH
+ tristate "Intel SCH PATA support"
depends on PCI
help
- This option enables support for the NatSemi/AMD SC1200 SoC
- companion chip used with the Geode processor family.
+ This option enables support for Intel SCH PATA on the Intel
+ SCH (US15W, US15L, UL11L) series host controllers.
If unsure, say N.
@@ -683,6 +624,15 @@ config PATA_TOSHIBA
If unsure, say N.
+config PATA_TRIFLEX
+ tristate "Compaq Triflex PATA support"
+ depends on PCI
+ help
+ Enable support for the Compaq 'Triflex' IDE controller as found
+ on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_VIA
tristate "VIA PATA support"
depends on PCI
@@ -701,12 +651,99 @@ config PATA_WINBOND
If unsure, say N.
-config PATA_WINBOND_VLB
- tristate "Winbond W83759A VLB PATA support (Experimental)"
- depends on ISA && EXPERIMENTAL
+endif # ATA_BMDMA
+
+comment "PIO-only SFF controllers"
+
+config PATA_AT32
+ tristate "Atmel AVR32 PATA support (Experimental)"
+ depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
help
- Support for the Winbond W83759A controller on Vesa Local Bus
- systems.
+ This option enables support for the IDE devices on the
+ Atmel AT32AP platform.
+
+ If unsure, say N.
+
+config PATA_AT91
+ tristate "PATA support for AT91SAM9260"
+ depends on ARM && ARCH_AT91
+ help
+ This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
+
+ If unsure, say N.
+
+config PATA_CMD640_PCI
+ tristate "CMD640 PCI PATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the CMD640 PCI IDE
+ interface chip. Only the primary channel is currently
+ supported.
+
+ If unsure, say N.
+
+config PATA_ISAPNP
+ tristate "ISA Plug and Play PATA support"
+ depends on ISAPNP
+ help
+ This option enables support for ISA plug & play ATA
+ controllers such as those found on old soundcards.
+
+ If unsure, say N.
+
+config PATA_IXP4XX_CF
+ tristate "IXP4XX Compact Flash support"
+ depends on ARCH_IXP4XX
+ help
+ This option enables support for a Compact Flash connected on
+ the ixp4xx expansion bus. This driver had been written for
+ Loft/Avila boards in mind but can work with others.
+
+ If unsure, say N.
+
+config PATA_MPIIX
+ tristate "Intel PATA MPIIX support"
+ depends on PCI
+ help
+ This option enables support for MPIIX PATA support.
+
+ If unsure, say N.
+
+config PATA_NS87410
+ tristate "Nat Semi NS87410 PATA support"
+ depends on PCI
+ help
+ This option enables support for the National Semiconductor
+ NS87410 PCI-IDE controller.
+
+ If unsure, say N.
+
+config PATA_OPTI
+ tristate "OPTI621/6215 PATA support (Very Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables full PIO support for the early Opti ATA
+ controllers found on some old motherboards.
+
+ If unsure, say N.
+
+config PATA_PALMLD
+ tristate "Palm LifeDrive PATA support"
+ depends on MACH_PALMLD
+ help
+ This option enables support for Palm LifeDrive's internal ATA
+ port via the new ATA layer.
+
+ If unsure, say N.
+
+config PATA_PCMCIA
+ tristate "PCMCIA PATA support"
+ depends on PCMCIA
+ help
+ This option enables support for PCMCIA ATA interfaces, including
+ compact flash card adapters via the new ATA layer.
+
+ If unsure, say N.
config HAVE_PATA_PLATFORM
bool
@@ -725,14 +762,6 @@ config PATA_PLATFORM
If unsure, say N.
-config PATA_AT91
- tristate "PATA support for AT91SAM9260"
- depends on ARM && ARCH_AT91
- help
- This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
-
- If unsure, say N.
-
config PATA_OF_PLATFORM
tristate "OpenFirmware platform device PATA support"
depends on PATA_PLATFORM && PPC_OF
@@ -743,69 +772,65 @@ config PATA_OF_PLATFORM
If unsure, say N.
-config PATA_ICSIDE
- tristate "Acorn ICS PATA support"
- depends on ARM && ARCH_ACORN
+config PATA_QDI
+ tristate "QDI VLB PATA support"
+ depends on ISA
help
- On Acorn systems, say Y here if you wish to use the ICS PATA
- interface card. This is not required for ICS partition support.
- If you are unsure, say N to this.
+ Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-config PATA_IXP4XX_CF
- tristate "IXP4XX Compact Flash support"
- depends on ARCH_IXP4XX
+config PATA_RB532
+ tristate "RouterBoard 532 PATA CompactFlash support"
+ depends on MIKROTIK_RB532
help
- This option enables support for a Compact Flash connected on
- the ixp4xx expansion bus. This driver had been written for
- Loft/Avila boards in mind but can work with others.
+ This option enables support for the RouterBoard 532
+ PATA CompactFlash controller.
If unsure, say N.
-config PATA_OCTEON_CF
- tristate "OCTEON Boot Bus Compact Flash support"
- depends on CPU_CAVIUM_OCTEON
+config PATA_RZ1000
+ tristate "PC Tech RZ1000 PATA support"
+ depends on PCI
help
- This option enables a polled compact flash driver for use with
- compact flash cards attached to the OCTEON boot bus.
+ This option enables basic support for the PC Tech RZ1000/1
+ PATA controllers via the new ATA layer
If unsure, say N.
-config PATA_SCC
- tristate "Toshiba's Cell Reference Set IDE support"
- depends on PCI && PPC_CELLEB
+config PATA_WINBOND_VLB
+ tristate "Winbond W83759A VLB PATA support (Experimental)"
+ depends on ISA && EXPERIMENTAL
help
- This option enables support for the built-in IDE controller on
- Toshiba Cell Reference Board.
+ Support for the Winbond W83759A controller on Vesa Local Bus
+ systems.
- If unsure, say N.
+comment "Generic fallback / legacy drivers"
-config PATA_SCH
- tristate "Intel SCH PATA support"
- depends on PCI
+config PATA_ACPI
+ tristate "ACPI firmware driver for PATA"
+ depends on ATA_ACPI && ATA_BMDMA
help
- This option enables support for Intel SCH PATA on the Intel
- SCH (US15W, US15L, UL11L) series host controllers.
-
- If unsure, say N.
+ This option enables an ACPI method driver which drives
+ motherboard PATA controller interfaces through the ACPI
+ firmware in the BIOS. This driver can sometimes handle
+ otherwise unsupported hardware.
-config PATA_BF54X
- tristate "Blackfin 54x ATAPI support"
- depends on BF542 || BF548 || BF549
+config ATA_GENERIC
+ tristate "Generic ATA support"
+ depends on PCI && ATA_BMDMA
help
- This option enables support for the built-in ATAPI controller on
- Blackfin 54x family chips.
+ This option enables support for generic BIOS configured
+ ATA controllers via the new ATA layer
If unsure, say N.
-config PATA_MACIO
- tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
- depends on PPC_PMAC
+config PATA_LEGACY
+ tristate "Legacy ISA PATA support (Experimental)"
+ depends on (ISA || PCI) && EXPERIMENTAL
help
- Most IDE capable PowerMacs have IDE busses driven by a variant
- of this controller which is part of the Apple chipset used on
- most PowerMac models. Some models have multiple busses using
- different chipsets, though generally, MacIO is one of them.
+ This option enables support for ISA/VLB/PCI bus legacy PATA
+ ports and allows them to be accessed via the new ATA layer.
+ If unsure, say N.
endif # ATA_SFF
endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index d0a93c4ad3ec..7ef89d73df63 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,33 +1,39 @@
obj-$(CONFIG_ATA) += libata.o
+# non-SFF interface
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
-obj-$(CONFIG_SATA_SVW) += sata_svw.o
+obj-$(CONFIG_SATA_FSL) += sata_fsl.o
+obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
+obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
+
+# SFF w/ custom DMA
+obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
+obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
+obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
+obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
+obj-$(CONFIG_SATA_SX4) += sata_sx4.o
+
+# SFF SATA w/ BMDMA
obj-$(CONFIG_ATA_PIIX) += ata_piix.o
+obj-$(CONFIG_SATA_MV) += sata_mv.o
+obj-$(CONFIG_SATA_NV) += sata_nv.o
obj-$(CONFIG_SATA_PROMISE) += sata_promise.o
-obj-$(CONFIG_SATA_QSTOR) += sata_qstor.o
obj-$(CONFIG_SATA_SIL) += sata_sil.o
-obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
-obj-$(CONFIG_SATA_VIA) += sata_via.o
-obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
obj-$(CONFIG_SATA_SIS) += sata_sis.o
-obj-$(CONFIG_SATA_SX4) += sata_sx4.o
-obj-$(CONFIG_SATA_NV) += sata_nv.o
+obj-$(CONFIG_SATA_SVW) += sata_svw.o
obj-$(CONFIG_SATA_ULI) += sata_uli.o
-obj-$(CONFIG_SATA_MV) += sata_mv.o
-obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
-obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
-obj-$(CONFIG_SATA_FSL) += sata_fsl.o
-obj-$(CONFIG_PATA_MACIO) += pata_macio.o
+obj-$(CONFIG_SATA_VIA) += sata_via.o
+obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o
+# SFF PATA w/ BMDMA
obj-$(CONFIG_PATA_ALI) += pata_ali.o
obj-$(CONFIG_PATA_AMD) += pata_amd.o
obj-$(CONFIG_PATA_ARTOP) += pata_artop.o
-obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
-obj-$(CONFIG_PATA_AT32) += pata_at32.o
obj-$(CONFIG_PATA_ATIIXP) += pata_atiixp.o
-obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
+obj-$(CONFIG_PATA_ATP867X) += pata_atp867x.o
+obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_CMD64X) += pata_cmd64x.o
obj-$(CONFIG_PATA_CS5520) += pata_cs5520.o
obj-$(CONFIG_PATA_CS5530) += pata_cs5530.o
@@ -39,47 +45,50 @@ obj-$(CONFIG_PATA_HPT366) += pata_hpt366.o
obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
-obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
-obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
+obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
obj-$(CONFIG_PATA_IT8213) += pata_it8213.o
+obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
+obj-$(CONFIG_PATA_MACIO) += pata_macio.o
+obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o
-obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o
-obj-$(CONFIG_PATA_OPTI) += pata_opti.o
-obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
-obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o
-obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
-obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
-obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
-obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
+obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
-obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
-obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
obj-$(CONFIG_PATA_RDC) += pata_rdc.o
-obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
+obj-$(CONFIG_PATA_SCC) += pata_scc.o
+obj-$(CONFIG_PATA_SCH) += pata_sch.o
obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
obj-$(CONFIG_PATA_SIL680) += pata_sil680.o
+obj-$(CONFIG_PATA_SIS) += pata_sis.o
obj-$(CONFIG_PATA_TOSHIBA) += pata_piccolo.o
+obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
obj-$(CONFIG_PATA_VIA) += pata_via.o
obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o
-obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
-obj-$(CONFIG_PATA_SIS) += pata_sis.o
-obj-$(CONFIG_PATA_TRIFLEX) += pata_triflex.o
+
+# SFF PIO only
+obj-$(CONFIG_PATA_AT32) += pata_at32.o
+obj-$(CONFIG_PATA_AT91) += pata_at91.o
+obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
+obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
-obj-$(CONFIG_PATA_SCC) += pata_scc.o
-obj-$(CONFIG_PATA_SCH) += pata_sch.o
-obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
-obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o
+obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
+obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
+obj-$(CONFIG_PATA_OPTI) += pata_opti.o
+obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
+obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
-obj-$(CONFIG_PATA_AT91) += pata_at91.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
-obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
+obj-$(CONFIG_PATA_QDI) += pata_qdi.o
+obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
+obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
+obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
+
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
# Should be last but one libata driver
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 33fb614f9784..573158a9668d 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -155,7 +155,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
return rc;
pcim_pin_device(dev);
}
- return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, NULL, 0);
}
static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ec52fc618763..7409f98d2ae6 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1589,7 +1589,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
hpriv->map = piix_init_sata_map(pdev, port_info,
piix_map_db_table[ent->driver_data]);
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
@@ -1626,7 +1626,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
host->flags |= ATA_HOST_PARALLEL_SCAN;
pci_set_master(pdev);
- return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
+ return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &piix_sht);
}
static void piix_remove_one(struct pci_dev *pdev)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c47373f01f89..06b7e49e039c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -160,6 +160,10 @@ int libata_allow_tpm = 0;
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
+static int atapi_an;
+module_param(atapi_an, int, 0444);
+MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
@@ -2122,6 +2126,14 @@ retry:
goto err_out;
}
+ if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
+ ata_dev_printk(dev, KERN_DEBUG, "dumping IDENTIFY data, "
+ "class=%d may_fallback=%d tried_spinup=%d\n",
+ class, may_fallback, tried_spinup);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
+ 16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
+ }
+
/* Falling back doesn't make sense if ID data was read
* successfully at least once.
*/
@@ -2510,7 +2522,8 @@ int ata_dev_configure(struct ata_device *dev)
* to enable ATAPI AN to discern between PHY status
* changed notifications and ATAPI ANs.
*/
- if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
+ if (atapi_an &&
+ (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
(!sata_pmp_attached(ap) ||
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
unsigned int err_mask;
@@ -6372,6 +6385,7 @@ static int __init ata_parse_force_one(char **cur,
{ "3.0Gbps", .spd_limit = 2 },
{ "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
{ "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
+ { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID },
{ "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
{ "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
{ "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) },
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 19ddf924944f..efa4a18cfb9d 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -63,7 +63,6 @@ const struct ata_port_operations ata_sff_port_ops = {
.sff_tf_read = ata_sff_tf_read,
.sff_exec_command = ata_sff_exec_command,
.sff_data_xfer = ata_sff_data_xfer,
- .sff_irq_clear = ata_sff_irq_clear,
.sff_drain_fifo = ata_sff_drain_fifo,
.lost_interrupt = ata_sff_lost_interrupt,
@@ -395,33 +394,12 @@ void ata_sff_irq_on(struct ata_port *ap)
ata_sff_set_devctl(ap, ap->ctl);
ata_wait_idle(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_irq_on);
/**
- * ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
- * @ap: Port associated with this ATA transaction.
- *
- * Clear interrupt and error flags in DMA status register.
- *
- * May be used as the irq_clear() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_sff_irq_clear(struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- if (!mmio)
- return;
-
- iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
-}
-EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
-
-/**
* ata_sff_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
@@ -820,11 +798,15 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
case ATAPI_PROT_NODATA:
ap->hsm_task_state = HSM_ST_LAST;
break;
+#ifdef CONFIG_ATA_BMDMA
case ATAPI_PROT_DMA:
ap->hsm_task_state = HSM_ST_LAST;
/* initiate bmdma */
ap->ops->bmdma_start(qc);
break;
+#endif /* CONFIG_ATA_BMDMA */
+ default:
+ BUG();
}
}
@@ -1491,27 +1473,27 @@ bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
}
EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
-/**
- * ata_sff_host_intr - Handle host interrupt for given (port, task)
- * @ap: Port on which interrupt arrived (possibly...)
- * @qc: Taskfile currently active in engine
- *
- * Handle host interrupt for given queued command. Currently,
- * only DMA interrupts are handled. All other commands are
- * handled via polling with interrupts disabled (nIEN bit).
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- * RETURNS:
- * One if interrupt was handled, zero if not (shared irq).
- */
-unsigned int ata_sff_host_intr(struct ata_port *ap,
- struct ata_queued_cmd *qc)
+static unsigned int ata_sff_idle_irq(struct ata_port *ap)
{
- struct ata_eh_info *ehi = &ap->link.eh_info;
- u8 status, host_stat = 0;
- bool bmdma_stopped = false;
+ ap->stats.idle_irq++;
+
+#ifdef ATA_IRQ_TRAP
+ if ((ap->stats.idle_irq % 1000) == 0) {
+ ap->ops->sff_check_status(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
+ ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+ return 1;
+ }
+#endif
+ return 0; /* irq not handled */
+}
+
+static unsigned int __ata_sff_port_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc,
+ bool hsmv_on_idle)
+{
+ u8 status;
VPRINTK("ata%u: protocol %d task_state %d\n",
ap->print_id, qc->tf.protocol, ap->hsm_task_state);
@@ -1528,90 +1510,56 @@ unsigned int ata_sff_host_intr(struct ata_port *ap,
* need to check ata_is_atapi(qc->tf.protocol) again.
*/
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- goto idle_irq;
- break;
- case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA) {
- /* check status of DMA engine */
- host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n",
- ap->print_id, host_stat);
-
- /* if it's not our irq... */
- if (!(host_stat & ATA_DMA_INTR))
- goto idle_irq;
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
- bmdma_stopped = true;
-
- if (unlikely(host_stat & ATA_DMA_ERR)) {
- /* error when transfering data to/from memory */
- qc->err_mask |= AC_ERR_HOST_BUS;
- ap->hsm_task_state = HSM_ST_ERR;
- }
- }
+ return ata_sff_idle_irq(ap);
break;
case HSM_ST:
+ case HSM_ST_LAST:
break;
default:
- goto idle_irq;
+ return ata_sff_idle_irq(ap);
}
-
/* check main status, clearing INTRQ if needed */
status = ata_sff_irq_status(ap);
if (status & ATA_BUSY) {
- if (bmdma_stopped) {
+ if (hsmv_on_idle) {
/* BMDMA engine is already stopped, we're screwed */
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
} else
- goto idle_irq;
+ return ata_sff_idle_irq(ap);
}
/* clear irq events */
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
ata_sff_hsm_move(ap, qc, status, 0);
- if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA))
- ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
-
return 1; /* irq handled */
-
-idle_irq:
- ap->stats.idle_irq++;
-
-#ifdef ATA_IRQ_TRAP
- if ((ap->stats.idle_irq % 1000) == 0) {
- ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
- ata_port_printk(ap, KERN_WARNING, "irq trap\n");
- return 1;
- }
-#endif
- return 0; /* irq not handled */
}
-EXPORT_SYMBOL_GPL(ata_sff_host_intr);
/**
- * ata_sff_interrupt - Default ATA host interrupt handler
- * @irq: irq line (unused)
- * @dev_instance: pointer to our ata_host information structure
+ * ata_sff_port_intr - Handle SFF port interrupt
+ * @ap: Port on which interrupt arrived (possibly...)
+ * @qc: Taskfile currently active in engine
*
- * Default interrupt handler for PCI IDE devices. Calls
- * ata_sff_host_intr() for each port that is not disabled.
+ * Handle port interrupt for given queued command.
*
* LOCKING:
- * Obtains host lock during operation.
+ * spin_lock_irqsave(host lock)
*
* RETURNS:
- * IRQ_NONE or IRQ_HANDLED.
+ * One if interrupt was handled, zero if not (shared irq).
*/
-irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+unsigned int ata_sff_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ return __ata_sff_port_intr(ap, qc, false);
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_intr);
+
+static inline irqreturn_t __ata_sff_interrupt(int irq, void *dev_instance,
+ unsigned int (*port_intr)(struct ata_port *, struct ata_queued_cmd *))
{
struct ata_host *host = dev_instance;
bool retried = false;
@@ -1631,7 +1579,7 @@ retry:
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc) {
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
- handled |= ata_sff_host_intr(ap, qc);
+ handled |= port_intr(ap, qc);
else
polling |= 1 << i;
} else
@@ -1658,7 +1606,8 @@ retry:
if (idle & (1 << i)) {
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
} else {
/* clear INTRQ and check if BUSY cleared */
if (!(ap->ops->sff_check_status(ap) & ATA_BUSY))
@@ -1680,6 +1629,25 @@ retry:
return IRQ_RETVAL(handled);
}
+
+/**
+ * ata_sff_interrupt - Default SFF ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host information structure
+ *
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_sff_port_intr() for each port that is not disabled.
+ *
+ * LOCKING:
+ * Obtains host lock during operation.
+ *
+ * RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+{
+ return __ata_sff_interrupt(irq, dev_instance, ata_sff_port_intr);
+}
EXPORT_SYMBOL_GPL(ata_sff_interrupt);
/**
@@ -1717,7 +1685,7 @@ void ata_sff_lost_interrupt(struct ata_port *ap)
status);
/* Run the host interrupt logic as if the interrupt had not been
lost */
- ata_sff_host_intr(ap, qc);
+ ata_sff_port_intr(ap, qc);
}
EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
@@ -1744,7 +1712,8 @@ void ata_sff_freeze(struct ata_port *ap)
*/
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_freeze);
@@ -1761,7 +1730,8 @@ void ata_sff_thaw(struct ata_port *ap)
{
/* clear & re-enable interrupts */
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
ata_sff_irq_on(ap);
}
EXPORT_SYMBOL_GPL(ata_sff_thaw);
@@ -2349,13 +2319,13 @@ int ata_pci_sff_init_host(struct ata_host *host)
EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
/**
- * ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
+ * ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host
* @pdev: target PCI device
* @ppi: array of port_info, must be enough for two ports
* @r_host: out argument for the initialized ATA host
*
- * Helper to allocate ATA host for @pdev, acquire all native PCI
- * resources and initialize it accordingly in one go.
+ * Helper to allocate PIO-only SFF ATA host for @pdev, acquire
+ * all PCI resources and initialize it accordingly in one go.
*
* LOCKING:
* Inherited from calling layer (may sleep).
@@ -2385,9 +2355,6 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
if (rc)
goto err_out;
- /* init DMA related stuff */
- ata_pci_bmdma_init(host);
-
devres_remove_group(&pdev->dev, NULL);
*r_host = host;
return 0;
@@ -2492,8 +2459,21 @@ out:
}
EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
+static const struct ata_port_info *ata_sff_find_valid_pi(
+ const struct ata_port_info * const *ppi)
+{
+ int i;
+
+ /* look up the first valid port_info */
+ for (i = 0; i < 2 && ppi[i]; i++)
+ if (ppi[i]->port_ops != &ata_dummy_port_ops)
+ return ppi[i];
+
+ return NULL;
+}
+
/**
- * ata_pci_sff_init_one - Initialize/register PCI IDE host controller
+ * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
* @pdev: Controller to be initialized
* @ppi: array of port_info, must be enough for two ports
* @sht: scsi_host_template to use when registering the host
@@ -2502,11 +2482,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
- * IDE taskfile registers.
- *
- * This function calls pci_enable_device(), reserves its register
- * regions, sets the dma mask, enables bus master mode, and calls
- * ata_device_add()
+ * IDE taskfile registers and is PIO only.
*
* ASSUMPTION:
* Nobody makes a single channel controller that appears solely as
@@ -2523,20 +2499,13 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
struct scsi_host_template *sht, void *host_priv, int hflag)
{
struct device *dev = &pdev->dev;
- const struct ata_port_info *pi = NULL;
+ const struct ata_port_info *pi;
struct ata_host *host = NULL;
- int i, rc;
+ int rc;
DPRINTK("ENTER\n");
- /* look up the first valid port_info */
- for (i = 0; i < 2 && ppi[i]; i++) {
- if (ppi[i]->port_ops != &ata_dummy_port_ops) {
- pi = ppi[i];
- break;
- }
- }
-
+ pi = ata_sff_find_valid_pi(ppi);
if (!pi) {
dev_printk(KERN_ERR, &pdev->dev,
"no valid port_info specified\n");
@@ -2557,7 +2526,6 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
host->private_data = host_priv;
host->flags |= hflag;
- pci_set_master(pdev);
rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
out:
if (rc == 0)
@@ -2571,6 +2539,12 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
#endif /* CONFIG_PCI */
+/*
+ * BMDMA support
+ */
+
+#ifdef CONFIG_ATA_BMDMA
+
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
@@ -2580,6 +2554,7 @@ const struct ata_port_operations ata_bmdma_port_ops = {
.qc_prep = ata_bmdma_qc_prep,
.qc_issue = ata_bmdma_qc_issue,
+ .sff_irq_clear = ata_bmdma_irq_clear,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
@@ -2804,6 +2779,75 @@ unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue);
/**
+ * ata_bmdma_port_intr - Handle BMDMA port interrupt
+ * @ap: Port on which interrupt arrived (possibly...)
+ * @qc: Taskfile currently active in engine
+ *
+ * Handle port interrupt for given queued command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * One if interrupt was handled, zero if not (shared irq).
+ */
+unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ u8 host_stat = 0;
+ bool bmdma_stopped = false;
+ unsigned int handled;
+
+ if (ap->hsm_task_state == HSM_ST_LAST && ata_is_dma(qc->tf.protocol)) {
+ /* check status of DMA engine */
+ host_stat = ap->ops->bmdma_status(ap);
+ VPRINTK("ata%u: host_stat 0x%X\n", ap->print_id, host_stat);
+
+ /* if it's not our irq... */
+ if (!(host_stat & ATA_DMA_INTR))
+ return ata_sff_idle_irq(ap);
+
+ /* before we do anything else, clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+ bmdma_stopped = true;
+
+ if (unlikely(host_stat & ATA_DMA_ERR)) {
+ /* error when transfering data to/from memory */
+ qc->err_mask |= AC_ERR_HOST_BUS;
+ ap->hsm_task_state = HSM_ST_ERR;
+ }
+ }
+
+ handled = __ata_sff_port_intr(ap, qc, bmdma_stopped);
+
+ if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
+ ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
+ return handled;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_intr);
+
+/**
+ * ata_bmdma_interrupt - Default BMDMA ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host information structure
+ *
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_bmdma_port_intr() for each port that is not disabled.
+ *
+ * LOCKING:
+ * Obtains host lock during operation.
+ *
+ * RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance)
+{
+ return __ata_sff_interrupt(irq, dev_instance, ata_bmdma_port_intr);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_interrupt);
+
+/**
* ata_bmdma_error_handler - Stock error handler for BMDMA controller
* @ap: port to handle error for
*
@@ -2848,7 +2892,8 @@ void ata_bmdma_error_handler(struct ata_port *ap)
/* if we're gonna thaw, make sure IRQ is clear */
if (thaw) {
ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (ap->ops->sff_irq_clear)
+ ap->ops->sff_irq_clear(ap);
}
}
@@ -2882,6 +2927,28 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
/**
+ * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ if (!mmio)
+ return;
+
+ iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+
+/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
@@ -3137,7 +3204,100 @@ void ata_pci_bmdma_init(struct ata_host *host)
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
+/**
+ * ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host
+ * @pdev: target PCI device
+ * @ppi: array of port_info, must be enough for two ports
+ * @r_host: out argument for the initialized ATA host
+ *
+ * Helper to allocate BMDMA ATA host for @pdev, acquire all PCI
+ * resources and initialize it accordingly in one go.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host)
+{
+ int rc;
+
+ rc = ata_pci_sff_prepare_host(pdev, ppi, r_host);
+ if (rc)
+ return rc;
+
+ ata_pci_bmdma_init(*r_host);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host);
+
+/**
+ * ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller
+ * @pdev: Controller to be initialized
+ * @ppi: array of port_info, must be enough for two ports
+ * @sht: scsi_host_template to use when registering the host
+ * @host_priv: host private_data
+ * @hflags: host flags
+ *
+ * This function is similar to ata_pci_sff_init_one() but also
+ * takes care of BMDMA initialization.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, negative on errno-based value on error.
+ */
+int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht, void *host_priv,
+ int hflags)
+{
+ struct device *dev = &pdev->dev;
+ const struct ata_port_info *pi;
+ struct ata_host *host = NULL;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ pi = ata_sff_find_valid_pi(ppi);
+ if (!pi) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "no valid port_info specified\n");
+ return -EINVAL;
+ }
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ goto out;
+
+ /* prepare and activate BMDMA host */
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+ if (rc)
+ goto out;
+ host->private_data = host_priv;
+ host->flags |= hflags;
+
+ pci_set_master(pdev);
+ rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+ out:
+ if (rc == 0)
+ devres_remove_group(&pdev->dev, NULL);
+ else
+ devres_release_group(&pdev->dev, NULL);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
+
#endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
/**
* ata_sff_port_init - Initialize SFF/BMDMA ATA port
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 066b9f301ed5..c8d47034d5e9 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -260,7 +260,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
return rc;
pcim_pin_device(pdev);
}
- return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
}
static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index f306e10c748d..794ec6e3275d 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -583,7 +583,10 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ppi[0] = &info_20_udma;
}
- return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
+ if (!ppi[0]->mwdma_mask && !ppi[0]->udma_mask)
+ return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
+ else
+ return ata_pci_bmdma_init_one(pdev, ppi, &ali_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index d95eca9c547e..620a07cabe31 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -574,7 +574,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
}
/* And fire it up */
- return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &amd_sht, hpriv, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 4d066d6c30fa..ba43f0f8c880 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -421,7 +421,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
BUG_ON(ppi[0] == NULL);
- return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
}
static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 44d88b380ddd..43755616dc5a 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -246,8 +246,8 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
ppi[i] = &ata_dummy_port_info;
- return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL,
- ATA_HOST_PARALLEL_SCAN);
+ return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
+ ATA_HOST_PARALLEL_SCAN);
}
static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index bb6e0746e07d..95295935dd95 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -525,7 +525,7 @@ static int atp867x_init_one(struct pci_dev *pdev,
pci_set_master(pdev);
- rc = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &atp867x_sht);
if (rc)
dev_printk(KERN_ERR, &pdev->dev, "failed to activate host\n");
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 6422cfd13d0d..9cae65de750e 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1214,7 +1214,7 @@ static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
* bfin_irq_clear - Clear ATAPI interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_sff_irq_clear().
+ * Note: Original code is ata_bmdma_irq_clear().
*/
static void bfin_irq_clear(struct ata_port *ap)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 4c81a71b8877..9f5da1c7454b 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -367,7 +367,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 17c5f346ff01..030952f1f97c 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -221,7 +221,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
continue;
rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
- ata_sff_interrupt, 0, DRV_NAME, host);
+ ata_bmdma_interrupt, 0, DRV_NAME, host);
if (rc)
return rc;
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index e809a4233a81..f792330f0d8e 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -324,7 +324,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index a02e6459fdcc..03a93186aa19 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -198,7 +198,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
- return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
}
static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 914ae3506ff5..21ee23f89e88 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -260,7 +260,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
}
- return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0);
}
static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 0fcc096b8dac..6d915b063d93 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -138,7 +138,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
- return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
}
static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 3bac0e079691..a08834758ea2 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -277,8 +277,8 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL,
- ATA_HOST_PARALLEL_SCAN);
+ return ata_pci_bmdma_init_one(pdev, ppi, &efar_sht, NULL,
+ ATA_HOST_PARALLEL_SCAN);
}
static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 8580eb3cd54d..7688868557b9 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -361,7 +361,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
break;
}
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 98b498b6907c..9ae4c0830577 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -987,7 +987,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
}
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
}
static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 8b95aeba0e74..32f3463216b8 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -548,7 +548,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
/* Now kick off ATA set up */
- return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
}
static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 727a81ce4c9f..b63d5e2d4628 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -248,7 +248,7 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
}
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &hpt3x3_sht);
}
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index b56e8f722d20..9f2889fe43b2 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -470,7 +470,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
}
- return ata_host_activate(host, ec->irq, ata_sff_interrupt, 0,
+ return ata_host_activate(host, ec->irq, ata_bmdma_interrupt, 0,
&pata_icside_sht);
}
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index f971f0de88e6..4d142a2ab8fd 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -273,7 +273,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &it8213_sht, NULL, 0);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 2bd2b002d14a..bf88f71a21f4 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -933,7 +933,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
else
ppi[0] = &info_smart;
}
- return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &it821x_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 565e01e6ac7c..cb3babbb7035 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -144,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
}
static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index b5b48e703cb7..76640ac76888 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -1110,7 +1110,7 @@ static int __devinit pata_macio_common_init(struct pata_macio_priv *priv,
/* Start it up */
priv->irq = irq;
- return ata_host_activate(priv->host, irq, ata_sff_interrupt, 0,
+ return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0,
&pata_macio_sht);
}
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index e8ca02e5a71d..dd38083dcbeb 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -153,7 +153,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
return -ENODEV;
}
#endif
- return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &marvell_sht, NULL, 0);
}
static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 36afe2c1c747..f087ab55b1df 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -659,7 +659,7 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv,
ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
/* activate host */
- return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0,
+ return ata_host_activate(host, priv->ata_irq, ata_bmdma_interrupt, 0,
&mpc52xx_ata_sht);
}
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 94f979a7f4f7..3eb921c746a1 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -82,7 +82,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
ata_pci_bmdma_clear_simplex(pdev);
/* And let the library code do the work */
- return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0);
}
static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index dd53a66b19e3..cc50bd09aa26 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -149,7 +149,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
ninja32_program(base);
/* FIXME: Should we disable them at remove ? */
- return ata_host_activate(host, dev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, dev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &ninja32_sht);
}
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index fdbba2d76d3e..605f198f958c 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -380,7 +380,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
ns87415_fixup(pdev);
- return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
}
static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 3001109352ea..06ddd91ffeda 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -750,20 +750,6 @@ static void octeon_cf_dev_config(struct ata_device *dev)
}
/*
- * Trap if driver tries to do standard bmdma commands. They are not
- * supported.
- */
-static void unreachable_qc(struct ata_queued_cmd *qc)
-{
- BUG();
-}
-
-static u8 unreachable_port(struct ata_port *ap)
-{
- BUG();
-}
-
-/*
* We don't do ATAPI DMA so return 0.
*/
static int octeon_cf_check_atapi_dma(struct ata_queued_cmd *qc)
@@ -804,10 +790,6 @@ static struct ata_port_operations octeon_cf_ops = {
.sff_dev_select = octeon_cf_dev_select,
.sff_irq_on = octeon_cf_irq_on,
.sff_irq_clear = octeon_cf_irq_clear,
- .bmdma_setup = unreachable_qc,
- .bmdma_start = unreachable_qc,
- .bmdma_stop = unreachable_qc,
- .bmdma_status = unreachable_port,
.cable_detect = ata_cable_40wire,
.set_piomode = octeon_cf_set_piomode,
.set_dmamode = octeon_cf_set_dmamode,
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 988ef2627be3..b811c1636204 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -248,7 +248,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
}
static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 76b7d12b1e8d..0852cd07de08 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -429,7 +429,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (optiplus_with_udma(dev))
ppi[0] = &info_82c700_udma;
- return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &optidma_sht, NULL, 0);
}
static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 09f1f22c0307..b18351122525 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -754,7 +754,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
return -EIO;
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &pdc2027x_sht);
}
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index fa1e2f3bc0fd..c39f213e1bbc 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -337,7 +337,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
return -ENODEV;
}
}
- return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
}
static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
index 981615414849..cb01bf9496fe 100644
--- a/drivers/ata/pata_piccolo.c
+++ b/drivers/ata/pata_piccolo.c
@@ -95,7 +95,7 @@ static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id
};
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
/* Just one port for the moment */
- return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &tosh_sht, NULL, 0);
}
static struct pci_device_id ata_tosh[] = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index a5fa388e5398..8574b31f1773 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -227,7 +227,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &radisys_sht, NULL, 0);
}
static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index 37092cfd7bc6..5fbe9b166c69 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -344,7 +344,7 @@ static int __devinit rdc_init_one(struct pci_dev *pdev,
*/
pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
@@ -354,7 +354,7 @@ static int __devinit rdc_init_one(struct pci_dev *pdev,
host->flags |= ATA_HOST_PARALLEL_SCAN;
pci_set_master(pdev);
- return ata_pci_sff_activate_host(host, ata_sff_interrupt, &rdc_sht);
+ return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht);
}
static void rdc_remove_one(struct pci_dev *pdev)
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 6b5b63a2fd8e..e2c18257adff 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -237,7 +237,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0);
}
static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 6f6193b707cb..d9db3f8d60ef 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -875,7 +875,7 @@ static void scc_postreset(struct ata_link *link, unsigned int *classes)
* scc_irq_clear - Clear PCI IDE BMDMA interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_sff_irq_clear().
+ * Note: Original code is ata_bmdma_irq_clear().
*/
static void scc_irq_clear (struct ata_port *ap)
@@ -1105,7 +1105,7 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &scc_sht);
}
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index 86b3d0133c7c..e97b32f03a6e 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -179,7 +179,7 @@ static int __devinit sch_init_one(struct pci_dev *pdev,
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(pdev, ppi, &sch_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
}
static int __init sch_init(void)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 43ea389df2b3..86dd714e3e1d 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -460,7 +460,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
ata_pci_bmdma_clear_simplex(pdev);
- return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 43faf106f647..d3190d7ec304 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -374,11 +374,11 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
ata_sff_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &sil680_sht);
use_ioports:
- return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index b6708032f321..60cea13cccce 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -826,7 +826,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
sis_fixup(pdev, chipset);
- return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &sis_sht, chipset, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 733b042a7469..98548f640c8e 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -316,7 +316,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
}
static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 48f50600ed2a..0d1f89e571dd 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -201,7 +201,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &triflex_sht, NULL, 0);
}
static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 7e3e0a5598b7..5e659885de16 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -627,7 +627,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
}
/* We have established the device type, now fire it up */
- return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config, 0);
+ return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f3471bc949d3..a476cd99b95d 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -675,8 +675,6 @@ static struct ata_port_operations mv5_ops = {
.freeze = mv_eh_freeze,
.thaw = mv_eh_thaw,
.hardreset = mv_hardreset,
- .error_handler = ata_std_error_handler, /* avoid SFF EH */
- .post_internal_cmd = ATA_OP_NULL,
.scr_read = mv5_scr_read,
.scr_write = mv5_scr_write,
@@ -2813,7 +2811,7 @@ static void mv_port_intr(struct ata_port *ap, u32 port_cause)
} else if (!edma_was_enabled) {
struct ata_queued_cmd *qc = mv_get_active_qc(ap);
if (qc)
- ata_sff_host_intr(ap, qc);
+ ata_bmdma_port_intr(ap, qc);
else
mv_unexpected_intr(ap, edma_was_enabled);
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index baa8f0d2c86f..6fd114784116 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -920,7 +920,7 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
}
/* handle interrupt */
- return ata_sff_host_intr(ap, qc);
+ return ata_bmdma_port_intr(ap, qc);
}
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@@ -1100,7 +1100,7 @@ static void nv_adma_irq_clear(struct ata_port *ap)
u32 notifier_clears[2];
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
- ata_sff_irq_clear(ap);
+ ata_bmdma_irq_clear(ap);
return;
}
@@ -1505,7 +1505,7 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
- handled += ata_sff_host_intr(ap, qc);
+ handled += ata_bmdma_port_intr(ap, qc);
} else {
/*
* No request pending? Clear interrupt status
@@ -2430,7 +2430,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ppi[0] = &nv_port_info[type];
ipriv = ppi[0]->private_data;
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index d533b3d20ca1..daeebf19a6a9 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -120,8 +120,6 @@ static void qs_host_stop(struct ata_host *host);
static void qs_qc_prep(struct ata_queued_cmd *qc);
static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
-static void qs_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 qs_bmdma_status(struct ata_port *ap);
static void qs_freeze(struct ata_port *ap);
static void qs_thaw(struct ata_port *ap);
static int qs_prereset(struct ata_link *link, unsigned long deadline);
@@ -137,8 +135,6 @@ static struct ata_port_operations qs_ata_ops = {
.inherits = &ata_sff_port_ops,
.check_atapi_dma = qs_check_atapi_dma,
- .bmdma_stop = qs_bmdma_stop,
- .bmdma_status = qs_bmdma_status,
.qc_prep = qs_qc_prep,
.qc_issue = qs_qc_issue,
@@ -190,16 +186,6 @@ static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
return 1; /* ATAPI DMA not supported */
}
-static void qs_bmdma_stop(struct ata_queued_cmd *qc)
-{
- /* nothing */
-}
-
-static u8 qs_bmdma_status(struct ata_port *ap)
-{
- return 0;
-}
-
static inline void qs_enter_reg_mode(struct ata_port *ap)
{
u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
@@ -454,7 +440,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
if (!pp || pp->state != qs_state_mmio)
continue;
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
- handled |= ata_sff_host_intr(ap, qc);
+ handled |= ata_sff_port_intr(ap, qc);
}
return handled;
}
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 2dda312b6b9a..3a4f84219719 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -503,7 +503,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
goto err_hsm;
/* ack bmdma irq events */
- ata_sff_irq_clear(ap);
+ ata_bmdma_irq_clear(ap);
/* kick HSM in the ass */
ata_sff_hsm_move(ap, qc, status, 0);
@@ -584,7 +584,7 @@ static void sil_thaw(struct ata_port *ap)
/* clear IRQ */
ap->ops->sff_check_status(ap);
- ata_sff_irq_clear(ap);
+ ata_bmdma_irq_clear(ap);
/* turn on SATA IRQ if supported */
if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index f8a91bfd66a8..2bfe3ae03976 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -279,7 +279,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
break;
}
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
@@ -308,7 +308,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &sis_sht);
}
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 101fd6a19829..7d9db4aaf07e 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -502,7 +502,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &k2_sata_sht);
}
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index d8dac17dc2c8..b8578c32d344 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -242,7 +242,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &uli_sht);
}
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 08f65492cc81..101d8c219caf 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -308,7 +308,7 @@ static void svia_noop_freeze(struct ata_port *ap)
* certain way. Leave it alone and just clear pending IRQ.
*/
ap->ops->sff_check_status(ap);
- ata_sff_irq_clear(ap);
+ ata_bmdma_irq_clear(ap);
}
/**
@@ -463,7 +463,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
struct ata_host *host;
int rc;
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
@@ -520,7 +520,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
struct ata_host *host;
int i, rc;
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
@@ -628,7 +628,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
svia_configure(pdev);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &svia_sht);
}
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 2107952ebff1..b777176ff494 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -245,7 +245,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled = ata_sff_host_intr(ap, qc);
+ handled = ata_bmdma_port_intr(ap, qc);
/* We received an interrupt during a polled command,
* or some other spurious condition. Interrupt reporting
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ee84e7e12039..3bad2701bfa6 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -386,6 +386,7 @@ enum {
ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */
ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */
+ ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
@@ -513,7 +514,9 @@ struct ata_ioports {
void __iomem *command_addr;
void __iomem *altstatus_addr;
void __iomem *ctl_addr;
+#ifdef CONFIG_ATA_BMDMA
void __iomem *bmdma_addr;
+#endif /* CONFIG_ATA_BMDMA */
void __iomem *scr_addr;
};
#endif /* CONFIG_ATA_SFF */
@@ -721,8 +724,10 @@ struct ata_port {
u8 ctl; /* cache of ATA control register */
u8 last_ctl; /* Cache last written value */
struct delayed_work sff_pio_task;
+#ifdef CONFIG_ATA_BMDMA
struct ata_bmdma_prd *bmdma_prd; /* BMDMA SG list */
dma_addr_t bmdma_prd_dma; /* and its DMA mapping */
+#endif /* CONFIG_ATA_BMDMA */
#endif /* CONFIG_ATA_SFF */
unsigned int pio_mask;
@@ -856,10 +861,12 @@ struct ata_port_operations {
void (*sff_irq_clear)(struct ata_port *);
void (*sff_drain_fifo)(struct ata_queued_cmd *qc);
+#ifdef CONFIG_ATA_BMDMA
void (*bmdma_setup)(struct ata_queued_cmd *qc);
void (*bmdma_start)(struct ata_queued_cmd *qc);
void (*bmdma_stop)(struct ata_queued_cmd *qc);
u8 (*bmdma_status)(struct ata_port *ap);
+#endif /* CONFIG_ATA_BMDMA */
#endif /* CONFIG_ATA_SFF */
ssize_t (*em_show)(struct ata_port *ap, char *buf);
@@ -1555,7 +1562,6 @@ extern void sata_pmp_error_handler(struct ata_port *ap);
#ifdef CONFIG_ATA_SFF
extern const struct ata_port_operations ata_sff_port_ops;
-extern const struct ata_port_operations ata_bmdma_port_ops;
extern const struct ata_port_operations ata_bmdma32_port_ops;
/* PIO only, sg_tablesize and dma_boundary limits can be removed */
@@ -1564,11 +1570,6 @@ extern const struct ata_port_operations ata_bmdma32_port_ops;
.sg_tablesize = LIBATA_MAX_PRD, \
.dma_boundary = ATA_DMA_BOUNDARY
-#define ATA_BMDMA_SHT(drv_name) \
- ATA_BASE_SHT(drv_name), \
- .sg_tablesize = LIBATA_MAX_PRD, \
- .dma_boundary = ATA_DMA_BOUNDARY
-
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
extern void ata_sff_pause(struct ata_port *ap);
@@ -1593,7 +1594,7 @@ extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
extern void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay);
extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
-extern unsigned int ata_sff_host_intr(struct ata_port *ap,
+extern unsigned int ata_sff_port_intr(struct ata_port *ap,
struct ata_queued_cmd *qc);
extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
extern void ata_sff_lost_interrupt(struct ata_port *ap);
@@ -1625,11 +1626,24 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev,
struct scsi_host_template *sht, void *host_priv, int hflags);
#endif /* CONFIG_PCI */
+#ifdef CONFIG_ATA_BMDMA
+
+extern const struct ata_port_operations ata_bmdma_port_ops;
+
+#define ATA_BMDMA_SHT(drv_name) \
+ ATA_BASE_SHT(drv_name), \
+ .sg_tablesize = LIBATA_MAX_PRD, \
+ .dma_boundary = ATA_DMA_BOUNDARY
+
extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
+extern unsigned int ata_bmdma_port_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc);
+extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance);
extern void ata_bmdma_error_handler(struct ata_port *ap);
extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
+extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
@@ -1640,7 +1654,15 @@ extern int ata_bmdma_port_start32(struct ata_port *ap);
#ifdef CONFIG_PCI
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
extern void ata_pci_bmdma_init(struct ata_host *host);
+extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host);
+extern int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht,
+ void *host_priv, int hflags);
#endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
/**
* ata_sff_busy_wait - Wait for a port status register