diff options
| -rw-r--r-- | drivers/media/i2c/ov5647.c | 81 |
1 files changed, 44 insertions, 37 deletions
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c index 79ac8c76baea..ad3397881c9a 100644 --- a/drivers/media/i2c/ov5647.c +++ b/drivers/media/i2c/ov5647.c @@ -265,12 +265,54 @@ static int ov5647_set_virtual_channel(struct v4l2_subdev *sd, int channel) channel_id | (channel << 6)); } +static int ov5647_set_mode(struct v4l2_subdev *sd) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 resetval, rdval; + int ret; + + ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval); + if (ret < 0) + return ret; + + ret = ov5647_write_array(sd, ov5647_640x480, + ARRAY_SIZE(ov5647_640x480)); + if (ret < 0) { + dev_err(&client->dev, "write sensor default regs error\n"); + return ret; + } + + ret = ov5647_set_virtual_channel(sd, 0); + if (ret < 0) + return ret; + + ret = ov5647_read(sd, OV5647_SW_STANDBY, &resetval); + if (ret < 0) + return ret; + + if (!(resetval & 0x01)) { + dev_err(&client->dev, "Device was in SW standby"); + ret = ov5647_write(sd, OV5647_SW_STANDBY, 0x01); + if (ret < 0) + return ret; + } + + return 0; +} + static int ov5647_stream_on(struct v4l2_subdev *sd) { + struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov5647 *ov5647 = to_state(sd); u8 val = MIPI_CTRL00_BUS_IDLE; int ret; + ret = ov5647_set_mode(sd); + if (ret) { + dev_err(&client->dev, "Failed to program sensor mode: %d\n", ret); + return ret; + } + if (ov5647->clock_ncont) val |= MIPI_CTRL00_CLOCK_LANE_GATE | MIPI_CTRL00_LINE_SYNC_ENABLE; @@ -320,42 +362,6 @@ static int set_sw_standby(struct v4l2_subdev *sd, bool standby) return ov5647_write(sd, OV5647_SW_STANDBY, rdval); } -static int __sensor_init(struct v4l2_subdev *sd) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - u8 resetval, rdval; - int ret; - - ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval); - if (ret < 0) - return ret; - - ret = ov5647_write_array(sd, ov5647_640x480, - ARRAY_SIZE(ov5647_640x480)); - if (ret < 0) { - dev_err(&client->dev, "write sensor default regs error\n"); - return ret; - } - - ret = ov5647_set_virtual_channel(sd, 0); - if (ret < 0) - return ret; - - ret = ov5647_read(sd, OV5647_SW_STANDBY, &resetval); - if (ret < 0) - return ret; - - if (!(resetval & 0x01)) { - dev_err(&client->dev, "Device was in SW standby"); - ret = ov5647_write(sd, OV5647_SW_STANDBY, 0x01); - if (ret < 0) - return ret; - } - - /* Stream off to make the clock lane into LP-11 state. */ - return ov5647_stream_off(sd); -} - static int ov5647_sensor_power(struct v4l2_subdev *sd, int on) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -387,7 +393,8 @@ static int ov5647_sensor_power(struct v4l2_subdev *sd, int on) goto out; } - ret = __sensor_init(sd); + /* Stream off to coax lanes into LP-11 state. */ + ret = ov5647_stream_off(sd); if (ret < 0) { clk_disable_unprepare(ov5647->xclk); dev_err(&client->dev, |