summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt10
-rw-r--r--drivers/phy/Kconfig1
-rw-r--r--drivers/phy/broadcom/phy-brcm-sata.c2
-rw-r--r--drivers/phy/lantiq/phy-lantiq-rcu-usb2.c10
-rw-r--r--drivers/phy/mediatek/phy-mtk-hdmi.c1
-rw-r--r--drivers/phy/mediatek/phy-mtk-mipi-dsi.c1
-rw-r--r--drivers/phy/rockchip/phy-rockchip-emmc.c12
7 files changed, 25 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index 00aa2d349e55..57d28c0d5696 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -16,11 +16,11 @@ Optional properties:
- drive-impedance-ohm: Specifies the drive impedance in Ohm.
Possible values are 33, 40, 50, 66 and 100.
If not set, the default value of 50 will be applied.
- - enable-strobe-pulldown: Enable internal pull-down for the strobe line.
- If not set, pull-down is not used.
- - output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
- If not set, the register defaults to 0x4.
- Maximum value 0xf.
+ - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe
+ line. If not set, pull-down is not used.
+ - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
+ If not set, the register defaults to 0x4.
+ Maximum value 0xf.
Example:
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 00dabe5fab8a..68d9c2f6a5ca 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -52,6 +52,7 @@ config PHY_XGENE
config USB_LGM_PHY
tristate "INTEL Lightning Mountain USB PHY Driver"
depends on USB_SUPPORT
+ depends on X86 || COMPILE_TEST
select USB_PHY
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index 3ecf41359591..769c707d9b71 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -651,7 +651,7 @@ static int brcm_dsl_sata_init(struct brcm_sata_port *port)
break;
msleep(20);
try--;
- };
+ }
if (!try) {
/* PLL did not lock; give up */
diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index a7d126192cf1..29d246ea24b4 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -124,8 +124,16 @@ static int ltq_rcu_usb2_phy_power_on(struct phy *phy)
reset_control_deassert(priv->phy_reset);
ret = clk_prepare_enable(priv->phy_gate_clk);
- if (ret)
+ if (ret) {
dev_err(dev, "failed to enable PHY gate\n");
+ return ret;
+ }
+
+ /*
+ * at least the xrx200 usb2 phy requires some extra time to be
+ * operational after enabling the clock
+ */
+ usleep_range(100, 200);
return ret;
}
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi.c b/drivers/phy/mediatek/phy-mtk-hdmi.c
index 45be8aa724f3..8313bd517e4c 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi.c
@@ -201,6 +201,7 @@ static const struct of_device_id mtk_hdmi_phy_match[] = {
},
{},
};
+MODULE_DEVICE_TABLE(of, mtk_hdmi_phy_match);
static struct platform_driver mtk_hdmi_phy_driver = {
.probe = mtk_hdmi_phy_probe,
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index eeb357bfb0bb..c51114d8e437 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -233,6 +233,7 @@ static const struct of_device_id mtk_mipi_tx_match[] = {
.data = &mt8183_mipitx_data },
{ },
};
+MODULE_DEVICE_TABLE(of, mtk_mipi_tx_match);
static struct platform_driver mtk_mipi_tx_driver = {
.probe = mtk_mipi_tx_probe,
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
index 1e424f263e7a..20023f6eb994 100644
--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -248,15 +248,17 @@ static int rockchip_emmc_phy_init(struct phy *phy)
* - SDHCI driver to get the PHY
* - SDHCI driver to init the PHY
*
- * The clock is optional, so upon any error we just set to NULL.
+ * The clock is optional, using clk_get_optional() to get the clock
+ * and do error processing if the return value != NULL
*
* NOTE: we don't do anything special for EPROBE_DEFER here. Given the
* above expected use case, EPROBE_DEFER isn't sensible to expect, so
* it's just like any other error.
*/
- rk_phy->emmcclk = clk_get(&phy->dev, "emmcclk");
+ rk_phy->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
if (IS_ERR(rk_phy->emmcclk)) {
- dev_dbg(&phy->dev, "Error getting emmcclk: %d\n", ret);
+ ret = PTR_ERR(rk_phy->emmcclk);
+ dev_err(&phy->dev, "Error getting emmcclk: %d\n", ret);
rk_phy->emmcclk = NULL;
}
@@ -380,10 +382,10 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
- if (of_property_read_bool(dev->of_node, "enable-strobe-pulldown"))
+ if (of_property_read_bool(dev->of_node, "rockchip,enable-strobe-pulldown"))
rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE;
- if (!of_property_read_u32(dev->of_node, "output-tapdelay-select", &val)) {
+ if (!of_property_read_u32(dev->of_node, "rockchip,output-tapdelay-select", &val)) {
if (val <= PHYCTRL_OTAPDLYSEL_MAXVALUE)
rk_phy->output_tapdelay_select = val;
else