diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | drivers/bcma/driver_chipcommon_nflash.c | 20 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_driver_chipcommon.h | 5 | ||||
| -rw-r--r-- | include/linux/platform_data/brcmnand.h | 12 |
4 files changed, 37 insertions, 1 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index ea3e6c914384..8a1c1e92937f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4021,6 +4021,7 @@ L: linux-mtd@lists.infradead.org L: bcm-kernel-feedback-list@broadcom.com S: Maintained F: drivers/mtd/nand/raw/brcmnand/ +F: include/linux/platform_data/brcmnand.h BROADCOM STB PCIE DRIVER M: Jim Quinlan <jim2101024@gmail.com> diff --git a/drivers/bcma/driver_chipcommon_nflash.c b/drivers/bcma/driver_chipcommon_nflash.c index d4f699aef8c4..a1a814750b4a 100644 --- a/drivers/bcma/driver_chipcommon_nflash.c +++ b/drivers/bcma/driver_chipcommon_nflash.c @@ -7,18 +7,28 @@ #include "bcma_private.h" +#include <linux/bitops.h> #include <linux/platform_device.h> +#include <linux/platform_data/brcmnand.h> #include <linux/bcma/bcma.h> +/* Alternate NAND controller driver name in order to allow both bcm47xxnflash + * and bcma_brcmnand to be built into the same kernel image. + */ +static const char *bcma_nflash_alt_name = "bcma_brcmnand"; + struct platform_device bcma_nflash_dev = { .name = "bcma_nflash", .num_resources = 0, }; +static const char *probes[] = { "bcm47xxpart", NULL }; + /* Initialize NAND flash access */ int bcma_nflash_init(struct bcma_drv_cc *cc) { struct bcma_bus *bus = cc->core->bus; + u32 reg; if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 && cc->core->id.rev != 38) { @@ -33,8 +43,16 @@ int bcma_nflash_init(struct bcma_drv_cc *cc) cc->nflash.present = true; if (cc->core->id.rev == 38 && - (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT)) + (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT)) { cc->nflash.boot = true; + /* Determine the chip select that is being used */ + reg = bcma_cc_read32(cc, BCMA_CC_NAND_CS_NAND_SELECT) & 0xff; + cc->nflash.brcmnand_info.chip_select = ffs(reg) - 1; + cc->nflash.brcmnand_info.part_probe_types = probes; + cc->nflash.brcmnand_info.ecc_stepsize = 512; + cc->nflash.brcmnand_info.ecc_strength = 1; + bcma_nflash_dev.name = bcma_nflash_alt_name; + } /* Prepare platform device, but don't register it yet. It's too early, * malloc (required by device_private_init) is not available yet. */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index d35b9206096d..e3314f746bfa 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -3,6 +3,7 @@ #define LINUX_BCMA_DRIVER_CC_H_ #include <linux/platform_device.h> +#include <linux/platform_data/brcmnand.h> #include <linux/gpio.h> /** ChipCommon core registers. **/ @@ -599,6 +600,10 @@ struct bcma_sflash { #ifdef CONFIG_BCMA_NFLASH struct bcma_nflash { + /* Must be the fist member for the brcmnand driver to + * de-reference that structure. + */ + struct brcmnand_platform_data brcmnand_info; bool present; bool boot; /* This is the flash the SoC boots from */ }; diff --git a/include/linux/platform_data/brcmnand.h b/include/linux/platform_data/brcmnand.h new file mode 100644 index 000000000000..8b8777985dce --- /dev/null +++ b/include/linux/platform_data/brcmnand.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef BRCMNAND_PLAT_DATA_H +#define BRCMNAND_PLAT_DATA_H + +struct brcmnand_platform_data { + int chip_select; + const char * const *part_probe_types; + unsigned int ecc_stepsize; + unsigned int ecc_strength; +}; + +#endif /* BRCMNAND_PLAT_DATA_H */ |