summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.yaml1
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt36
-rw-r--r--Documentation/devicetree/bindings/connector/usb-connector.txt2
-rw-r--r--Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt33
-rw-r--r--Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt36
-rw-r--r--Documentation/devicetree/bindings/display/simple-framebuffer.txt91
-rw-r--r--Documentation/devicetree/bindings/display/simple-framebuffer.yaml160
-rw-r--r--Documentation/devicetree/bindings/interconnect/interconnect.txt4
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml1
-rw-r--r--Documentation/devicetree/bindings/mfd/axp20x.txt1
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml1
-rw-r--r--Documentation/devicetree/bindings/trivial-devices.yaml4
-rw-r--r--Documentation/devicetree/bindings/writing-bindings.txt60
-rw-r--r--Documentation/devicetree/writing-schema.md2
-rw-r--r--drivers/of/address.c40
-rw-r--r--drivers/of/base.c5
-rw-r--r--drivers/of/device.c2
-rw-r--r--drivers/of/fdt.c2
-rw-r--r--drivers/of/irq.c2
-rw-r--r--drivers/of/of_reserved_mem.c22
-rw-r--r--drivers/of/property.c2
-rw-r--r--drivers/of/unittest.c13
-rw-r--r--include/linux/of.h7
28 files changed, 341 insertions, 196 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 82dd7582e945..591bbd012d63 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -67,6 +67,7 @@ properties:
patternProperties:
'^cpu@[0-9a-f]+$':
+ type: object
properties:
device_type:
const: cpu
diff --git a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
new file mode 100644
index 000000000000..1464a4713553
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
@@ -0,0 +1,36 @@
+Allwinner Memory Bus (MBUS) controller
+
+The MBUS controller drives the MBUS that other devices in the SoC will
+use to perform DMA. It also has a register interface that allows to
+monitor and control the bandwidth and priorities for masters on that
+bus.
+
+Required properties:
+ - compatible: Must be one of:
+ - allwinner,sun5i-a13-mbus
+ - reg: Offset and length of the register set for the controller
+ - clocks: phandle to the clock driving the controller
+ - dma-ranges: See section 2.3.9 of the DeviceTree Specification
+ - #interconnect-cells: Must be one, with the argument being the MBUS
+ port ID
+
+Each device having to perform their DMA through the MBUS must have the
+interconnects and interconnect-names properties set to the MBUS
+controller and with "dma-mem" as the interconnect name.
+
+Example:
+
+mbus: dram-controller@1c01000 {
+ compatible = "allwinner,sun5i-a13-mbus";
+ reg = <0x01c01000 0x1000>;
+ clocks = <&ccu CLK_MBUS>;
+ dma-ranges = <0x00000000 0x40000000 0x20000000>;
+ #interconnect-cells = <1>;
+};
+
+fe0: display-frontend@1e00000 {
+ compatible = "allwinner,sun5i-a13-display-frontend";
+ ...
+ interconnects = <&mbus 19>;
+ interconnect-names = "dma-mem";
+};
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
index a9a2f2fc44f2..cef556d4e5ee 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.txt
+++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
@@ -47,7 +47,7 @@ Required properties for usb-c-connector with power delivery support:
Required nodes:
- any data bus to the connector should be modeled using the OF graph bindings
specified in bindings/graph.txt, unless the bus is between parent node and
- the connector. Since single connector can have multpile data buses every bus
+ the connector. Since single connector can have multiple data buses every bus
has assigned OF graph port number as follows:
0: High Speed (HS), present in all connectors,
1: Super Speed (SS), present in SS capable connectors,
diff --git a/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt b/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt
deleted file mode 100644
index aaa6c24c8e70..000000000000
--- a/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Meson specific Simple Framebuffer bindings
-
-This binding documents meson specific extensions to the simple-framebuffer
-bindings. The meson simplefb u-boot code relies on the devicetree containing
-pre-populated simplefb nodes.
-
-These extensions are intended so that u-boot can select the right node based
-on which pipeline is being used. As such they are solely intended for
-firmware / bootloader use, and the OS should ignore them.
-
-Required properties:
-- compatible: "amlogic,simple-framebuffer", "simple-framebuffer"
-- amlogic,pipeline, one of:
- "vpu-cvbs"
- "vpu-hdmi"
-
-Example:
-
-chosen {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- simplefb_hdmi: framebuffer-hdmi {
- compatible = "amlogic,simple-framebuffer",
- "simple-framebuffer";
- amlogic,pipeline = "vpu-hdmi";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
- <&clkc CLKID_GCLK_VENCI_INT0>;
- power-domains = <&pwrc_vpu>;
- };
-};
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt
deleted file mode 100644
index d693b8dc9a62..000000000000
--- a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Sunxi specific Simple Framebuffer bindings
-
-This binding documents sunxi specific extensions to the simple-framebuffer
-bindings. The sunxi simplefb u-boot code relies on the devicetree containing
-pre-populated simplefb nodes.
-
-These extensions are intended so that u-boot can select the right node based
-on which pipeline is being used. As such they are solely intended for
-firmware / bootloader use, and the OS should ignore them.
-
-Required properties:
-- compatible: "allwinner,simple-framebuffer"
-- allwinner,pipeline, one of:
- "de_be0-lcd0"
- "de_be1-lcd1"
- "de_be0-lcd0-hdmi"
- "de_be1-lcd1-hdmi"
- "mixer0-lcd0"
- "mixer0-lcd0-hdmi"
- "mixer1-lcd1-hdmi"
- "mixer1-lcd1-tve"
-
-Example:
-
-chosen {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>;
- };
-};
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
deleted file mode 100644
index 5a9ce511be88..000000000000
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Simple Framebuffer
-
-A simple frame-buffer describes a frame-buffer setup by firmware or
-the bootloader, with the assumption that the display hardware has already
-been set up to scan out from the memory pointed to by the reg property.
-
-Since simplefb nodes represent runtime information they must be sub-nodes of
-the chosen node (*). Simplefb nodes must be named "framebuffer@<address>".
-
-If the devicetree contains nodes for the display hardware used by a simplefb,
-then the simplefb node must contain a property called "display", which
-contains a phandle pointing to the primary display hw node, so that the OS
-knows which simplefb to disable when handing over control to a driver for the
-real hardware. The bindings for the hw nodes must specify which node is
-considered the primary node.
-
-It is advised to add display# aliases to help the OS determine how to number
-things. If display# aliases are used, then if the simplefb node contains a
-"display" property then the /aliases/display# path must point to the display
-hw node the "display" property points to, otherwise it must point directly
-to the simplefb node.
-
-If a simplefb node represents the preferred console for user interaction,
-then the chosen node's stdout-path property should point to it, or to the
-primary display hw node, as with display# aliases. If display aliases are
-used then it should be set to the alias instead.
-
-It is advised that devicetree files contain pre-filled, disabled framebuffer
-nodes, so that the firmware only needs to update the mode information and
-enable them. This way if e.g. later on support for more display clocks get
-added, the simplefb nodes will already contain this info and the firmware
-does not need to be updated.
-
-If pre-filled framebuffer nodes are used, the firmware may need extra
-information to find the right node. In that case an extra platform specific
-compatible and platform specific properties should be used and documented,
-see e.g. simple-framebuffer-sunxi.txt .
-
-Required properties:
-- compatible: "simple-framebuffer"
-- reg: Should contain the location and size of the framebuffer memory.
-- width: The width of the framebuffer in pixels.
-- height: The height of the framebuffer in pixels.
-- stride: The number of bytes in each line of the framebuffer.
-- format: The format of the framebuffer surface. Valid values are:
- - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
- - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
-
-Optional properties:
-- clocks : List of clocks used by the framebuffer.
-- *-supply : Any number of regulators used by the framebuffer. These should
- be named according to the names in the device's design.
-
- The above resources are expected to already be configured correctly.
- The OS must ensure they are not modified or disabled while the simple
- framebuffer remains active.
-
-- display : phandle pointing to the primary display hardware node
-
-Example:
-
-aliases {
- display0 = &lcdc0;
-}
-
-chosen {
- framebuffer0: framebuffer@1d385000 {
- compatible = "simple-framebuffer";
- reg = <0x1d385000 (1600 * 1200 * 2)>;
- width = <1600>;
- height = <1200>;
- stride = <(1600 * 2)>;
- format = "r5g6b5";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
- lcd-supply = <&reg_dc1sw>;
- display = <&lcdc0>;
- };
- stdout-path = "display0";
-};
-
-soc@1c00000 {
- lcdc0: lcdc@1c0c000 {
- compatible = "allwinner,sun4i-a10-lcdc";
- ...
- };
-};
-
-
-*) Older devicetree files may have a compatible = "simple-framebuffer" node
-in a different place, operating systems must first enumerate any compatible
-nodes found under chosen and then check for other compatible nodes.
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
new file mode 100644
index 000000000000..b052d76cf8b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/simple-framebuffer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Framebuffer Device Tree Bindings
+
+maintainers:
+ - Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+ - Hans de Goede <hdegoede@redhat.com>
+
+description: |+
+ A simple frame-buffer describes a frame-buffer setup by firmware or
+ the bootloader, with the assumption that the display hardware has
+ already been set up to scan out from the memory pointed to by the
+ reg property.
+
+ Since simplefb nodes represent runtime information they must be
+ sub-nodes of the chosen node (*). Simplefb nodes must be named
+ framebuffer@<address>.
+
+ If the devicetree contains nodes for the display hardware used by a
+ simplefb, then the simplefb node must contain a property called
+ display, which contains a phandle pointing to the primary display
+ hw node, so that the OS knows which simplefb to disable when handing
+ over control to a driver for the real hardware. The bindings for the
+ hw nodes must specify which node is considered the primary node.
+
+ It is advised to add display# aliases to help the OS determine how
+ to number things. If display# aliases are used, then if the simplefb
+ node contains a display property then the /aliases/display# path
+ must point to the display hw node the display property points to,
+ otherwise it must point directly to the simplefb node.
+
+ If a simplefb node represents the preferred console for user
+ interaction, then the chosen node stdout-path property should point
+ to it, or to the primary display hw node, as with display#
+ aliases. If display aliases are used then it should be set to the
+ alias instead.
+
+ It is advised that devicetree files contain pre-filled, disabled
+ framebuffer nodes, so that the firmware only needs to update the
+ mode information and enable them. This way if e.g. later on support
+ for more display clocks get added, the simplefb nodes will already
+ contain this info and the firmware does not need to be updated.
+
+ If pre-filled framebuffer nodes are used, the firmware may need
+ extra information to find the right node. In that case an extra
+ platform specific compatible and platform specific properties should
+ be used and documented.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - allwinner,simple-framebuffer
+ - amlogic,simple-framebuffer
+ - const: simple-framebuffer
+
+ reg:
+ description: Location and size of the framebuffer memory
+
+ clocks:
+ description: List of clocks used by the framebuffer.
+
+ power-domains:
+ description: List of power domains used by the framebuffer.
+
+ width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width of the framebuffer in pixels
+
+ height:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Height of the framebuffer in pixels
+
+ stride:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of bytes of a line in the framebuffer
+
+ format:
+ description: >
+ Format of the framebuffer:
+ * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+ * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+ enum:
+ - a8b8g8r8
+ - r5g6b5
+
+ display:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Primary display hardware node
+
+ allwinner,pipeline:
+ description: Pipeline used by the framebuffer on Allwinner SoCs
+ enum:
+ - de_be0-lcd0
+ - de_be0-lcd0-hdmi
+ - de_be0-lcd0-tve0
+ - de_be1-lcd0
+ - de_be1-lcd1-hdmi
+ - de_fe0-de_be0-lcd0
+ - de_fe0-de_be0-lcd0-hdmi
+ - de_fe0-de_be0-lcd0-tve0
+ - mixer0-lcd0
+ - mixer0-lcd0-hdmi
+ - mixer1-lcd1-hdmi
+ - mixer1-lcd1-tve
+
+ amlogic,pipeline:
+ description: Pipeline used by the framebuffer on Amlogic SoCs
+ enum:
+ - vpu-cvbs
+ - vpu-hdmi
+
+patternProperties:
+ "^[a-zA-Z0-9-]+-supply$":
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Regulators used by the framebuffer. These should be named
+ according to the names in the device design.
+
+required:
+ # The binding requires also reg, width, height, stride and format,
+ # but usually they will be filled by the bootloader.
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ aliases {
+ display0 = &lcdc0;
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ stdout-path = "display0";
+ framebuffer0: framebuffer@1d385000 {
+ compatible = "simple-framebuffer";
+ reg = <0x1d385000 3840000>;
+ width = <1600>;
+ height = <1200>;
+ stride = <3200>;
+ format = "r5g6b5";
+ clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+ lcd-supply = <&reg_dc1sw>;
+ display = <&lcdc0>;
+ };
+ };
+
+ soc@1c00000 {
+ lcdc0: lcdc@1c0c000 {
+ compatible = "allwinner,sun4i-a10-lcdc";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
index 5a3c575b387a..6f5d23a605b7 100644
--- a/Documentation/devicetree/bindings/interconnect/interconnect.txt
+++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
@@ -51,6 +51,10 @@ interconnect-names : List of interconnect path name strings sorted in the same
interconnect-names to match interconnect paths with interconnect
specifier pairs.
+ Reserved interconnect names:
+ * dma-mem: Path from the device to the main memory of
+ the system
+
Example:
sdhci@7864000 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
index 758fbd7128e7..54838d4ea44c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -129,6 +129,7 @@ required:
patternProperties:
"^v2m@[0-9a-f]+$":
+ type: object
description: |
* GICv2m extension for MSI/MSI-x support (Optional)
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 2af4ff95d6bc..4991a6415796 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -25,6 +25,7 @@ Required properties:
* "x-powers,axp223"
* "x-powers,axp803"
* "x-powers,axp806"
+ * "x-powers,axp805", "x-powers,axp806"
* "x-powers,axp809"
* "x-powers,axp813"
- reg: The I2C slave address or RSB hardware address for the AXP chip
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
index c2dbb3e8d840..4e90ddd77784 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
output-low, output-high.
Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
index 991be0cd0948..84be0f2c6f3b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -44,7 +44,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
Non-empty subnodes must specify the 'pins' property.
Note that not all properties are valid for all pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
index 7ed56a1b70fc..a7aaaa7db83b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
output-low, output-high.
Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
index cdc4787e59d2..f095209848c8 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
@@ -42,7 +42,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
output-low, output-high.
Non-empty subnodes must specify the 'pins' property.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
index c22e6c425d0b..004056506679 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
@@ -41,7 +41,7 @@ information about e.g. the mux function.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pin configuration subnode:
- pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength.
Non-empty subnodes must specify the 'pins' property.
Note that not all properties are valid for all pins.
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index c4ab59550fc2..b3f0fe96ff0d 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -59,6 +59,7 @@ properties:
patternProperties:
'^frame@[0-9a-z]*$':
+ type: object
description: A timer node has up to 8 frame sub-nodes, each with the following properties.
properties:
frame-number:
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index d79fb22bde39..747fd3f689dc 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -92,6 +92,8 @@ properties:
- fsl,sgtl5000
# G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
- gmt,g751
+ # Infineon IR38064 Voltage Regulator
+ - infineon,ir38064
# Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
- infineon,slb9635tt
# Infineon SLB9645 I2C TPM (new protocol, max 400khz)
@@ -102,6 +104,8 @@ properties:
- isil,isl29028
# Intersil ISL29030 Ambient Light and Proximity Sensor
- isil,isl29030
+ # Intersil ISL68137 Digital Output Configurable PWM Controller
+ - isil,isl68137
# 5 Bit Programmable, Pulse-Width Modulator
- maxim,ds1050
# Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
diff --git a/Documentation/devicetree/bindings/writing-bindings.txt b/Documentation/devicetree/bindings/writing-bindings.txt
new file mode 100644
index 000000000000..27dfd2d8016e
--- /dev/null
+++ b/Documentation/devicetree/bindings/writing-bindings.txt
@@ -0,0 +1,60 @@
+DOs and DON'Ts for designing and writing Devicetree bindings
+
+This is a list of common review feedback items focused on binding design. With
+every rule, there are exceptions and bindings have many gray areas.
+
+For guidelines related to patches, see
+Documentation/devicetree/bindings/submitting-patches.txt
+
+
+Overall design
+
+- DO attempt to make bindings complete even if a driver doesn't support some
+ features. For example, if a device has an interrupt, then include the
+ 'interrupts' property even if the driver is only polled mode.
+
+- DON'T refer to Linux or "device driver" in bindings. Bindings should be
+ based on what the hardware has, not what an OS and driver currently support.
+
+- DO use node names matching the class of the device. Many standard names are
+ defined in the DT Spec. If there isn't one, consider adding it.
+
+- DO check that the example matches the documentation especially after making
+ review changes.
+
+- DON'T create nodes just for the sake of instantiating drivers. Multi-function
+ devices only need child nodes when the child nodes have their own DT
+ resources. A single node can be multiple providers (e.g. clocks and resets).
+
+- DON'T use 'syscon' alone without a specific compatible string. A 'syscon'
+ hardware block should have a compatible string unique enough to infer the
+ register layout of the entire block (at a minimum).
+
+
+Properties
+
+- DO make 'compatible' properties specific. DON'T use wildcards in compatible
+ strings. DO use fallback compatibles when devices are the same as or a subset
+ of prior implementations. DO add new compatibles in case there are new
+ features or bugs.
+
+- DO use a vendor prefix on device specific property names. Consider if
+ properties could be common among devices of the same class. Check other
+ existing bindings for similar devices.
+
+- DON'T redefine common properties. Just reference the definition and define
+ constraints specific to the device.
+
+- DO use common property unit suffixes for properties with scientific units.
+ See property-units.txt.
+
+- DO define properties in terms of constraints. How many entries? What are
+ possible values? What is the order?
+
+
+Board/SoC .dts Files
+
+- DO put all MMIO devices under a bus node and not at the top-level.
+
+- DO use non-empty 'ranges' to limit the size of child buses/devices. 64-bit
+ platforms don't need all devices to have 64-bit address and size.
diff --git a/Documentation/devicetree/writing-schema.md b/Documentation/devicetree/writing-schema.md
index a3652d33a48f..dc032db36262 100644
--- a/Documentation/devicetree/writing-schema.md
+++ b/Documentation/devicetree/writing-schema.md
@@ -97,7 +97,7 @@ The DT schema project must be installed in order to validate the DT schema
binding documents and validate DTS files using the DT schema. The DT schema
project can be installed with pip:
-`pip3 install git+https://github.com/robherring/yaml-bindings.git@master`
+`pip3 install git+https://github.com/devicetree-org/dt-schema.git@master`
dtc must also be built with YAML output support enabled. This requires that
libyaml and its headers be installed on the host system.
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 2270373b30ab..978427a9d5e6 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -569,6 +569,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
* relative to that node.
*/
static u64 __of_translate_address(struct device_node *dev,
+ struct device_node *(*get_parent)(const struct device_node *),
const __be32 *in_addr, const char *rprop,
struct device_node **host)
{
@@ -585,7 +586,7 @@ static u64 __of_translate_address(struct device_node *dev,
*host = NULL;
/* Get parent & match bus type */
- parent = of_get_parent(dev);
+ parent = get_parent(dev);
if (parent == NULL)
goto bail;
bus = of_match_bus(parent);
@@ -609,7 +610,7 @@ static u64 __of_translate_address(struct device_node *dev,
/* Switch to parent bus */
of_node_put(dev);
dev = parent;
- parent = of_get_parent(dev);
+ parent = get_parent(dev);
/* If root, we have finished */
if (parent == NULL) {
@@ -665,7 +666,8 @@ u64 of_translate_address(struct device_node *dev, const __be32 *in_addr)
struct device_node *host;
u64 ret;
- ret = __of_translate_address(dev, in_addr, "ranges", &host);
+ ret = __of_translate_address(dev, of_get_parent,
+ in_addr, "ranges", &host);
if (host) {
of_node_put(host);
return OF_BAD_ADDR;
@@ -675,12 +677,31 @@ u64 of_translate_address(struct device_node *dev, const __be32 *in_addr)
}
EXPORT_SYMBOL(of_translate_address);
+static struct device_node *__of_get_dma_parent(const struct device_node *np)
+{
+ struct of_phandle_args args;
+ int ret, index;
+
+ index = of_property_match_string(np, "interconnect-names", "dma-mem");
+ if (index < 0)
+ return of_get_parent(np);
+
+ ret = of_parse_phandle_with_args(np, "interconnects",
+ "#interconnect-cells",
+ index, &args);
+ if (ret < 0)
+ return of_get_parent(np);
+
+ return of_node_get(args.np);
+}
+
u64 of_translate_dma_address(struct device_node *dev, const __be32 *in_addr)
{
struct device_node *host;
u64 ret;
- ret = __of_translate_address(dev, in_addr, "dma-ranges", &host);
+ ret = __of_translate_address(dev, __of_get_dma_parent,
+ in_addr, "dma-ranges", &host);
if (host) {
of_node_put(host);
@@ -736,7 +757,8 @@ static u64 of_translate_ioport(struct device_node *dev, const __be32 *in_addr,
unsigned long port;
struct device_node *host;
- taddr = __of_translate_address(dev, in_addr, "ranges", &host);
+ taddr = __of_translate_address(dev, of_get_parent,
+ in_addr, "ranges", &host);
if (host) {
/* host-specific port access */
port = logic_pio_trans_hwaddr(&host->fwnode, taddr, size);
@@ -908,9 +930,15 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
return -EINVAL;
while (1) {
+ struct device_node *parent;
+
naddr = of_n_addr_cells(node);
nsize = of_n_size_cells(node);
- node = of_get_next_parent(node);
+
+ parent = __of_get_dma_parent(node);
+ of_node_put(node);
+
+ node = parent;
if (!node)
break;
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 5226e898476e..20e0e7ee4edf 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1350,8 +1350,9 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it)
* property data length
*/
if (it->cur + count > it->list_end) {
- pr_err("%pOF: arguments longer than property\n",
- it->parent);
+ pr_err("%pOF: %s = %d found %d\n",
+ it->parent, it->cells_name,
+ count, it->cell_count);
goto err;
}
}
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 3717f2a20d0d..da8158392010 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -17,7 +17,7 @@
/**
* of_match_device - Tell if a struct device matches an of_device_id list
- * @ids: array of of device match structures to search in
+ * @matches: array of of device match structures to search in
* @dev: the of device structure to match against
*
* Used by a driver to check whether an platform_device present in the
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 4734223ab702..de893c9616a1 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1091,7 +1091,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
/* Retrieve command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
- strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
+ strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
/*
* CONFIG_CMDLINE is meant to be a default in case nothing else
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index e1f6f392a4c0..7f84bb4903ca 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -500,7 +500,7 @@ void __init of_irq_init(const struct of_device_id *matches)
* pointer, interrupt-parent device_node etc.
*/
desc = kzalloc(sizeof(*desc), GFP_KERNEL);
- if (WARN_ON(!desc)) {
+ if (!desc) {
of_node_put(np);
goto err;
}
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 6a36bc0b3d64..89e190e94af7 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -171,6 +171,7 @@ static int __init __reserved_mem_init_node(struct reserved_mem *rmem)
{
extern const struct of_device_id __reservedmem_of_table[];
const struct of_device_id *i;
+ int ret = -ENOENT;
for (i = __reservedmem_of_table; i < &__rmem_of_table_sentinel; i++) {
reservedmem_of_init_fn initfn = i->data;
@@ -179,13 +180,14 @@ static int __init __reserved_mem_init_node(struct reserved_mem *rmem)
if (!of_flat_dt_is_compatible(rmem->fdt_node, compat))
continue;
- if (initfn(rmem) == 0) {
+ ret = initfn(rmem);
+ if (ret == 0) {
pr_info("initialized node %s, compatible id %s\n",
rmem->name, compat);
- return 0;
+ break;
}
}
- return -ENOENT;
+ return ret;
}
static int __init __rmem_cmp(const void *a, const void *b)
@@ -245,7 +247,9 @@ void __init fdt_init_reserved_mem(void)
int len;
const __be32 *prop;
int err = 0;
+ int nomap;
+ nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
prop = of_get_flat_dt_prop(node, "phandle", &len);
if (!prop)
prop = of_get_flat_dt_prop(node, "linux,phandle", &len);
@@ -255,8 +259,16 @@ void __init fdt_init_reserved_mem(void)
if (rmem->size == 0)
err = __reserved_mem_alloc_size(node, rmem->name,
&rmem->base, &rmem->size);
- if (err == 0)
- __reserved_mem_init_node(rmem);
+ if (err == 0) {
+ err = __reserved_mem_init_node(rmem);
+ if (err != 0 && err != -ENOENT) {
+ pr_info("node %s compatible matching fail\n",
+ rmem->name);
+ memblock_free(rmem->base, rmem->size);
+ if (nomap)
+ memblock_add(rmem->base, rmem->size);
+ }
+ }
}
}
diff --git a/drivers/of/property.c b/drivers/of/property.c
index 8631efa1daa1..d7fa75e31f22 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -659,7 +659,7 @@ EXPORT_SYMBOL(of_graph_get_next_endpoint);
*
* Return: An 'endpoint' node pointer which is identified by reg and at the same
* is the child of a port node identified by port_reg. reg and port_reg are
- * ignored when they are -1.
+ * ignored when they are -1. Use of_node_put() on the pointer when done.
*/
struct device_node *of_graph_get_endpoint_by_regs(
const struct device_node *parent, int port_reg, int reg)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index cccde756b510..3832a5de4602 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -344,7 +344,7 @@ static void __init of_unittest_check_phandles(void)
}
nh = kzalloc(sizeof(*nh), GFP_KERNEL);
- if (WARN_ON(!nh))
+ if (!nh)
return;
nh->np = np;
@@ -1199,12 +1199,9 @@ static int __init unittest_data_add(void)
/* creating copy */
unittest_data = kmemdup(__dtb_testcases_begin, size, GFP_KERNEL);
-
- if (!unittest_data) {
- pr_warn("%s: Failed to allocate memory for unittest_data; "
- "not running tests\n", __func__);
+ if (!unittest_data)
return -ENOMEM;
- }
+
of_fdt_unflatten_tree(unittest_data, NULL, &unittest_data_node);
if (!unittest_data_node) {
pr_warn("%s: No tree to attach; not running tests\n", __func__);
@@ -1845,10 +1842,8 @@ static int unittest_i2c_bus_probe(struct platform_device *pdev)
dev_dbg(dev, "%s for node @%pOF\n", __func__, np);
std = devm_kzalloc(dev, sizeof(*std), GFP_KERNEL);
- if (!std) {
- dev_err(dev, "Failed to allocate unittest i2c data\n");
+ if (!std)
return -ENOMEM;
- }
/* link them together */
std->pdev = pdev;
diff --git a/include/linux/of.h b/include/linux/of.h
index e240992e5cb6..0cf857012f11 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -234,8 +234,8 @@ extern struct device_node *of_find_all_nodes(struct device_node *prev);
static inline u64 of_read_number(const __be32 *cell, int size)
{
u64 r = 0;
- while (size--)
- r = (r << 32) | be32_to_cpu(*(cell++));
+ for (; size--; cell++)
+ r = (r << 32) | be32_to_cpu(*cell);
return r;
}
@@ -1449,7 +1449,8 @@ int of_overlay_notifier_unregister(struct notifier_block *nb);
#else
-static inline int of_overlay_fdt_apply(void *overlay_fdt, int *ovcs_id)
+static inline int of_overlay_fdt_apply(void *overlay_fdt, u32 overlay_fdt_size,
+ int *ovcs_id)
{
return -ENOTSUPP;
}