summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/include/asm/io_apic.h5
-rw-r--r--arch/x86/include/asm/x86_init.h1
-rw-r--r--arch/x86/kernel/apic/io_apic.c20
-rw-r--r--arch/x86/kernel/x86_init.c1
-rw-r--r--drivers/iommu/irq_remapping.c12
5 files changed, 25 insertions, 14 deletions
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 1838e884a5cc..459e50a424d1 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -161,6 +161,7 @@ extern void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg);
extern void native_compose_msi_msg(struct pci_dev *pdev,
unsigned int irq, unsigned int dest,
struct msi_msg *msg, u8 hpet_id);
+extern void native_eoi_ioapic_pin(int apic, int pin, int vector);
int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr);
extern int save_ioapic_entries(void);
@@ -211,6 +212,9 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
{
x86_io_apic_ops.modify(apic, reg, value);
}
+
+extern void io_apic_eoi(unsigned int apic, unsigned int vector);
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
@@ -246,6 +250,7 @@ static inline void disable_ioapic_support(void) { }
#define native_ioapic_set_affinity NULL
#define native_setup_ioapic_entry NULL
#define native_compose_msi_msg NULL
+#define native_eoi_ioapic_pin NULL
#endif
#endif /* _ASM_X86_IO_APIC_H */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index c9f87be84b0f..7669941cc9d2 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -212,6 +212,7 @@ struct x86_io_apic_ops {
int (*setup_entry)(int irq, struct IO_APIC_route_entry *entry,
unsigned int destination, int vector,
struct io_apic_irq_attr *attr);
+ void (*eoi_ioapic_pin)(int apic, int pin, int vector);
};
extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index b832810d28f0..9ed796ccc32c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -310,7 +310,7 @@ static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+ (mpc_ioapic_addr(idx) & ~PAGE_MASK);
}
-static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
+void io_apic_eoi(unsigned int apic, unsigned int vector)
{
struct io_apic __iomem *io_apic = io_apic_base(apic);
writel(vector, &io_apic->eoi);
@@ -557,19 +557,10 @@ static void unmask_ioapic_irq(struct irq_data *data)
* Otherwise, we simulate the EOI message manually by changing the trigger
* mode to edge and then back to level, with RTE being masked during this.
*/
-static void __eoi_ioapic_pin(int apic, int pin, int vector, struct irq_cfg *cfg)
+void native_eoi_ioapic_pin(int apic, int pin, int vector)
{
if (mpc_ioapic_ver(apic) >= 0x20) {
- /*
- * Intr-remapping uses pin number as the virtual vector
- * in the RTE. Actual vector is programmed in
- * intr-remapping table entry. Hence for the io-apic
- * EOI we use the pin number.
- */
- if (cfg && irq_remapped(cfg))
- io_apic_eoi(apic, pin);
- else
- io_apic_eoi(apic, vector);
+ io_apic_eoi(apic, vector);
} else {
struct IO_APIC_route_entry entry, entry1;
@@ -597,7 +588,8 @@ void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
raw_spin_lock_irqsave(&ioapic_lock, flags);
for_each_irq_pin(entry, cfg->irq_2_pin)
- __eoi_ioapic_pin(entry->apic, entry->pin, cfg->vector, cfg);
+ x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin,
+ cfg->vector);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -634,7 +626,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
}
raw_spin_lock_irqsave(&ioapic_lock, flags);
- __eoi_ioapic_pin(apic, pin, entry.vector, NULL);
+ x86_io_apic_ops.eoi_ioapic_pin(apic, pin, entry.vector);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
}
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index ee4a17c22569..d065d67c2672 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -129,4 +129,5 @@ struct x86_io_apic_ops x86_io_apic_ops = {
.print_entries = native_io_apic_print_entries,
.set_affinity = native_ioapic_set_affinity,
.setup_entry = native_setup_ioapic_entry,
+ .eoi_ioapic_pin = native_eoi_ioapic_pin,
};
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 158091b345cb..849ce4ce500b 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -143,11 +143,23 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
return do_setup_msix_irqs(dev, nvec);
}
+void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
+{
+ /*
+ * Intr-remapping uses pin number as the virtual vector
+ * in the RTE. Actual vector is programmed in
+ * intr-remapping table entry. Hence for the io-apic
+ * EOI we use the pin number.
+ */
+ io_apic_eoi(apic, pin);
+}
+
static void __init irq_remapping_modify_x86_ops(void)
{
x86_io_apic_ops.disable = irq_remapping_disable_io_apic;
x86_io_apic_ops.set_affinity = set_remapped_irq_affinity;
x86_io_apic_ops.setup_entry = setup_ioapic_remapped_entry;
+ x86_io_apic_ops.eoi_ioapic_pin = eoi_ioapic_pin_remapped;
x86_msi.setup_msi_irqs = irq_remapping_setup_msi_irqs;
x86_msi.setup_hpet_msi = setup_hpet_msi_remapped;
x86_msi.compose_msi_msg = compose_remapped_msi_msg;